#include "MEDFileMesh.hxx"
#include "MEDFileUtilities.hxx"
+#include "MEDFileFieldOverView.hxx"
+#include "MEDFileField.hxx"
#include "MEDLoader.hxx"
#include "MEDLoaderBase.hxx"
{
}
-std::size_t MEDFileMesh::getHeapMemorySize() const
+std::size_t MEDFileMesh::getHeapMemorySizeWithoutChildren() const
{
- std::size_t ret=_dt_unit.capacity()+_name.capacity()+_univ_name.capacity()+_desc_name.capacity();
+ std::size_t ret(_dt_unit.capacity()+_name.capacity()+_univ_name.capacity()+_desc_name.capacity());
for(std::map<std::string, std::vector<std::string> >::const_iterator it=_groups.begin();it!=_groups.end();it++)
{
ret+=(*it).first.capacity()+(*it).second.capacity()*sizeof(std::string);
return ret;
}
+std::vector<const BigMemoryObject *> MEDFileMesh::getDirectChildren() const
+{
+ return std::vector<const BigMemoryObject *>();
+}
+
/*!
* Returns a new MEDFileMesh holding the mesh data that has been read from a given MED
* file. The first mesh in the file is loaded.
* \throw If there is no meshes in the file.
* \throw If the mesh in the file is of a not supported type.
*/
-MEDFileMesh *MEDFileMesh::New(const char *fileName, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileMesh::New(const char *fileName, MEDFileMeshReadSelector *mrs)
{
std::vector<std::string> ms=MEDLoader::GetMeshNames(fileName);
if(ms.empty())
* \throw If there is no mesh with given attributes in the file.
* \throw If the mesh in the file is of a not supported type.
*/
-MEDFileMesh *MEDFileMesh::New(const char *fileName, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileMesh::New(const char *fileName, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs)
{
MEDFileUtilities::CheckFileForRead(fileName);
ParaMEDMEM::MEDCouplingMeshType meshType;
* \throw If the file is open for reading only.
* \throw If the writing mode == 1 and the same data is present in an existing file.
*/
-void MEDFileMesh::write(med_idt fid) const throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::write(med_idt fid) const
{
if(!existsFamily(0))
const_cast<MEDFileMesh *>(this)->addFamily(DFT_FAM_NAME,0);
* \throw If the mesh name is not set.
* \throw If \a mode == 1 and the same data is present in an existing file.
*/
-void MEDFileMesh::write(const char *fileName, int mode) const throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::write(const char *fileName, int mode) const
{
med_access_mode medmod=MEDFileUtilities::TraduceWriteMode(mode);
MEDFileUtilities::AutoFid fid=MEDfileOpen(fileName,medmod);
}
-bool MEDFileMesh::changeNames(const std::vector< std::pair<std::string,std::string> >& modifTab) throw(INTERP_KERNEL::Exception)
+bool MEDFileMesh::changeNames(const std::vector< std::pair<std::string,std::string> >& modifTab)
{
for(std::vector< std::pair<std::string,std::string> >::const_iterator it=modifTab.begin();it!=modifTab.end();it++)
{
* \return std::vector<std::string> - a sequence of names of the families.
* \throw If the name of a nonexistent group is specified.
*/
-std::vector<std::string> MEDFileMesh::getFamiliesOnGroup(const char *name) const throw(INTERP_KERNEL::Exception)
+std::vector<std::string> MEDFileMesh::getFamiliesOnGroup(const char *name) const
{
std::string oname(name);
std::map<std::string, std::vector<std::string> >::const_iterator it=_groups.find(oname);
* \return std::vector<std::string> - a sequence of names of the families.
* \throw If a name of a nonexistent group is present in \a grps.
*/
-std::vector<std::string> MEDFileMesh::getFamiliesOnGroups(const std::vector<std::string>& grps) const throw(INTERP_KERNEL::Exception)
+std::vector<std::string> MEDFileMesh::getFamiliesOnGroups(const std::vector<std::string>& grps) const
{
std::set<std::string> fams;
for(std::vector<std::string>::const_iterator it=grps.begin();it!=grps.end();it++)
* \return std::vector<int> - sequence of ids of the families.
* \throw If the name of a nonexistent group is specified.
*/
-std::vector<int> MEDFileMesh::getFamiliesIdsOnGroup(const char *name) const throw(INTERP_KERNEL::Exception)
+std::vector<int> MEDFileMesh::getFamiliesIdsOnGroup(const char *name) const
{
std::string oname(name);
std::map<std::string, std::vector<std::string> >::const_iterator it=_groups.find(oname);
* \param [in] name - the name of the group of interest.
* \param [in] fams - a sequence of names of families constituting the group.
*/
-void MEDFileMesh::setFamiliesOnGroup(const char *name, const std::vector<std::string>& fams) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::setFamiliesOnGroup(const char *name, const std::vector<std::string>& fams)
{
std::string oname(name);
_groups[oname]=fams;
* \param [in] famIds - a sequence of ids of families constituting the group.
* \throw If a family name is not found by its id.
*/
-void MEDFileMesh::setFamiliesIdsOnGroup(const char *name, const std::vector<int>& famIds) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::setFamiliesIdsOnGroup(const char *name, const std::vector<int>& famIds)
{
std::string oname(name);
std::vector<std::string> fams(famIds.size());
* \param [in] name - the name of the family of interest.
* \return std::vector<std::string> - a sequence of names of groups including the family.
*/
-std::vector<std::string> MEDFileMesh::getGroupsOnFamily(const char *name) const throw(INTERP_KERNEL::Exception)
+std::vector<std::string> MEDFileMesh::getGroupsOnFamily(const char *name) const
{
std::vector<std::string> ret;
for(std::map<std::string, std::vector<std::string> >::const_iterator it1=_groups.begin();it1!=_groups.end();it1++)
* \param [in] grps - a sequence of group names to add the family in.
* \throw If a family named \a famName not yet exists.
*/
-void MEDFileMesh::setGroupsOnFamily(const char *famName, const std::vector<std::string>& grps) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::setGroupsOnFamily(const char *famName, const std::vector<std::string>& grps)
{
std::string fName(famName);
const std::map<std::string,int>::const_iterator it=_families.find(fName);
* Changes a name of every family, included in one group only, to be same as the group name.
* \throw If there are families with equal names in \a this mesh.
*/
-void MEDFileMesh::assignFamilyNameWithGroupName() throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::assignFamilyNameWithGroupName()
{
std::map<std::string, std::vector<std::string> > groups(_groups);
std::map<std::string,int> newFams;
*
* \return the removed groups.
*/
-std::vector<std::string> MEDFileMesh::removeEmptyGroups() throw(INTERP_KERNEL::Exception)
+std::vector<std::string> MEDFileMesh::removeEmptyGroups()
{
std::vector<std::string> ret;
std::map<std::string, std::vector<std::string> > newGrps;
* \param [in] name - the name of the group to remove.
* \throw If no group with such a \a name exists.
*/
-void MEDFileMesh::removeGroup(const char *name) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::removeGroup(const char *name)
{
std::string oname(name);
std::map<std::string, std::vector<std::string> >::iterator it=_groups.find(oname);
* \param [in] name - the name of the family to remove.
* \throw If no family with such a \a name exists.
*/
-void MEDFileMesh::removeFamily(const char *name) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::removeFamily(const char *name)
{
std::string oname(name);
std::map<std::string, int >::iterator it=_families.find(oname);
*
* \sa MEDFileMesh::removeOrphanFamilies.
*/
-std::vector<std::string> MEDFileMesh::removeOrphanGroups() throw(INTERP_KERNEL::Exception)
+std::vector<std::string> MEDFileMesh::removeOrphanGroups()
{
removeOrphanFamilies();
return removeEmptyGroups();
* \return - The list of removed families names.
* \sa MEDFileMesh::removeOrphanGroups.
*/
-std::vector<std::string> MEDFileMesh::removeOrphanFamilies() throw(INTERP_KERNEL::Exception)
+std::vector<std::string> MEDFileMesh::removeOrphanFamilies()
{
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> allFamIdsInUse=computeAllFamilyIdsInUse();
std::vector<std::string> ret;
* \throw If no group named \a oldName exists in \a this mesh.
* \throw If a group named \a newName already exists.
*/
-void MEDFileMesh::changeGroupName(const char *oldName, const char *newName) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::changeGroupName(const char *oldName, const char *newName)
{
std::string oname(oldName);
std::map<std::string, std::vector<std::string> >::iterator it=_groups.find(oname);
* \param [in] oldId - a current id of the family.
* \param [in] newId - a new family id.
*/
-void MEDFileMesh::changeFamilyId(int oldId, int newId) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::changeFamilyId(int oldId, int newId)
{
changeFamilyIdArr(oldId,newId);
std::map<std::string,int> fam2;
* \throw If no family named \a oldName exists in \a this mesh.
* \throw If a family named \a newName already exists.
*/
-void MEDFileMesh::changeFamilyName(const char *oldName, const char *newName) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::changeFamilyName(const char *oldName, const char *newName)
{
std::string oname(oldName);
std::map<std::string, int >::iterator it=_families.find(oname);
_families[fname]=id;
}
-void MEDFileMesh::setFamilyIdUnique(const char *familyName, int id) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::setFamilyIdUnique(const char *familyName, int id)
{
std::string fname(familyName);
for(std::map<std::string,int>::const_iterator it=_families.begin();it!=_families.end();it++)
* \param [in] famId - an id of the family.
* \throw If a family with the same name or id already exists in \a this mesh.
*/
-void MEDFileMesh::addFamily(const char *familyName, int famId) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::addFamily(const char *familyName, int famId)
{
std::string fname(familyName);
std::map<std::string,int>::const_iterator it=_families.find(fname);
* \throw If no mesh entities of dimension \a meshDimRelToMaxExt exist in \a this mesh.
* \throw If no family field of dimension \a meshDimRelToMaxExt is present in \a this mesh.
*/
-void MEDFileMesh::createGroupOnAll(int meshDimRelToMaxExt, const char *groupName) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::createGroupOnAll(int meshDimRelToMaxExt, const char *groupName)
{
std::string grpName(groupName);
std::vector<int> levs=getNonEmptyLevelsExt();
* famIds should exclusively belong.
* \return bool - \c true if no modification is done in \a this mesh by this method.
*/
-bool MEDFileMesh::keepFamIdsOnlyOnLevs(const std::vector<int>& famIds, const std::vector<int>& vMeshDimRelToMaxExt) throw(INTERP_KERNEL::Exception)
+bool MEDFileMesh::keepFamIdsOnlyOnLevs(const std::vector<int>& famIds, const std::vector<int>& vMeshDimRelToMaxExt)
{
std::set<int> levsInput(vMeshDimRelToMaxExt.begin(),vMeshDimRelToMaxExt.end());
std::vector<int> levs=getNonEmptyLevelsExt();
* \throw If \a grpName or \a famName is an empty string.
* \throw If no family named \a famName is present in \a this mesh.
*/
-void MEDFileMesh::addFamilyOnGrp(const char *grpName, const char *famName) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::addFamilyOnGrp(const char *grpName, const char *famName)
{
std::string grpn(grpName);
std::string famn(famName);
* This method is quite underground because it can lead to unconsistency because family 'otherFamName' is \b not added into _families.
* This method is used by MEDFileMesh::keepFamIdsOnlyOnLevs method.
*/
-void MEDFileMesh::addFamilyOnAllGroupsHaving(const char *famName, const char *otherFamName) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::addFamilyOnAllGroupsHaving(const char *famName, const char *otherFamName)
{
std::string famNameCpp(famName);
std::string otherCpp(otherFamName);
}
}
-void MEDFileMesh::changeAllGroupsContainingFamily(const char *familyNameToChange, const std::vector<std::string>& newFamiliesNames) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::changeAllGroupsContainingFamily(const char *familyNameToChange, const std::vector<std::string>& newFamiliesNames)
{
ChangeAllGroupsContainingFamily(_groups,familyNameToChange,newFamiliesNames);
}
-void MEDFileMesh::ChangeAllGroupsContainingFamily(std::map<std::string, std::vector<std::string> >& groups, const char *familyNameToChange, const std::vector<std::string>& newFamiliesNames) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::ChangeAllGroupsContainingFamily(std::map<std::string, std::vector<std::string> >& groups, const char *familyNameToChange, const std::vector<std::string>& newFamiliesNames)
{
std::string fam(familyNameToChange);
for(std::map<std::string, std::vector<std::string> >::iterator it=groups.begin();it!=groups.end();it++)
* \return std::string - the name of the existing or the created family.
* \throw If it is not possible to create a unique family name.
*/
-std::string MEDFileMesh::findOrCreateAndGiveFamilyWithId(int id, bool& created) throw(INTERP_KERNEL::Exception)
+std::string MEDFileMesh::findOrCreateAndGiveFamilyWithId(int id, bool& created)
{
return FindOrCreateAndGiveFamilyWithId(_families,id,created);
}
* will be modified.
* This method will throws an exception if it is not possible to create a unique family name.
*/
-std::string MEDFileMesh::FindOrCreateAndGiveFamilyWithId(std::map<std::string,int>& families, int id, bool& created) throw(INTERP_KERNEL::Exception)
+std::string MEDFileMesh::FindOrCreateAndGiveFamilyWithId(std::map<std::string,int>& families, int id, bool& created)
{
std::vector<std::string> famAlreadyExisting(families.size());
int ii=0;
* \return int - the id of the family of interest.
* \throw If no family with such a \a name exists.
*/
-int MEDFileMesh::getFamilyId(const char *name) const throw(INTERP_KERNEL::Exception)
+int MEDFileMesh::getFamilyId(const char *name) const
{
std::string oname(name);
std::map<std::string, int>::const_iterator it=_families.find(oname);
* \return std::vector<int> - a sequence of the ids of families of interest.
* \throw If \a fams contains a name of an inexistent family.
*/
-std::vector<int> MEDFileMesh::getFamiliesIds(const std::vector<std::string>& fams) const throw(INTERP_KERNEL::Exception)
+std::vector<int> MEDFileMesh::getFamiliesIds(const std::vector<std::string>& fams) const
{
std::vector<int> ret(fams.size());
int i=0;
* \return int - the maximal norm of family id.
* \throw If there are no families in \a this mesh.
*/
-int MEDFileMesh::getMaxAbsFamilyId() const throw(INTERP_KERNEL::Exception)
+int MEDFileMesh::getMaxAbsFamilyId() const
{
if(_families.empty())
throw INTERP_KERNEL::Exception("MEDFileMesh::getMaxFamilyId : no families set !");
* \return int - the maximal family id.
* \throw If there are no families in \a this mesh.
*/
-int MEDFileMesh::getMaxFamilyId() const throw(INTERP_KERNEL::Exception)
+int MEDFileMesh::getMaxFamilyId() const
{
if(_families.empty())
throw INTERP_KERNEL::Exception("MEDFileMesh::getMaxFamilyId : no families set !");
* \return int - the minimal family id.
* \throw If there are no families in \a this mesh.
*/
-int MEDFileMesh::getMinFamilyId() const throw(INTERP_KERNEL::Exception)
+int MEDFileMesh::getMinFamilyId() const
{
if(_families.empty())
throw INTERP_KERNEL::Exception("MEDFileMesh::getMinFamilyId : no families set !");
* considered but all family fields as well.
* \return int - the maximal family id.
*/
-int MEDFileMesh::getTheMaxAbsFamilyId() const throw(INTERP_KERNEL::Exception)
+int MEDFileMesh::getTheMaxAbsFamilyId() const
{
int m1=-std::numeric_limits<int>::max();
for(std::map<std::string,int>::const_iterator it=_families.begin();it!=_families.end();it++)
* considered but all family fields as well.
* \return int - the maximal family id.
*/
-int MEDFileMesh::getTheMaxFamilyId() const throw(INTERP_KERNEL::Exception)
+int MEDFileMesh::getTheMaxFamilyId() const
{
int m1=-std::numeric_limits<int>::max();
for(std::map<std::string,int>::const_iterator it=_families.begin();it!=_families.end();it++)
* considered but all family fields as well.
* \return int - the minimal family id.
*/
-int MEDFileMesh::getTheMinFamilyId() const throw(INTERP_KERNEL::Exception)
+int MEDFileMesh::getTheMinFamilyId() const
{
int m1=std::numeric_limits<int>::max();
for(std::map<std::string,int>::const_iterator it=_families.begin();it!=_families.end();it++)
*
* \sa MEDFileMesh::computeAllFamilyIdsInUse
*/
-DataArrayInt *MEDFileMesh::getAllFamiliesIdsReferenced() const throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileMesh::getAllFamiliesIdsReferenced() const
{
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
std::set<int> v;
*
* \sa MEDFileMesh::getAllFamiliesIdsReferenced
*/
-DataArrayInt *MEDFileMesh::computeAllFamilyIdsInUse() const throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileMesh::computeAllFamilyIdsInUse() const
{
std::vector<int> famLevs=getFamArrNonEmptyLevelsExt();
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret;
* true is returned if no modification has been needed. false if family
* renumbering has been needed.
*/
-bool MEDFileMesh::ensureDifferentFamIdsPerLevel() throw(INTERP_KERNEL::Exception)
+bool MEDFileMesh::ensureDifferentFamIdsPerLevel()
{
std::vector<int> levs=getNonEmptyLevelsExt();
std::set<int> allFamIds;
* This method will throw an exception if a same family id is detected in different level.
* \warning This policy is the opposite of those in MED file documentation ...
*/
-void MEDFileMesh::normalizeFamIdsTrio() throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::normalizeFamIdsTrio()
{
ensureDifferentFamIdsPerLevel();
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> allIds=getAllFamiliesIdsReferenced();
* This policy is those defined in the MED file format but is the opposite of those implemented in SMESH and Trio.
* This method will throw an exception if a same family id is detected in different level.
*/
-void MEDFileMesh::normalizeFamIdsMEDFile() throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::normalizeFamIdsMEDFile()
{
ensureDifferentFamIdsPerLevel();
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> allIds=getAllFamiliesIdsReferenced();
* \return std::string - the name of the found family.
* \throw If no family with the given \a id exists.
*/
-std::string MEDFileMesh::getFamilyNameGivenId(int id) const throw(INTERP_KERNEL::Exception)
+std::string MEDFileMesh::getFamilyNameGivenId(int id) const
{
for(std::map<std::string,int>::const_iterator it=_families.begin();it!=_families.end();it++)
if((*it).second==id)
* \throw If the name of a nonexistent group is specified.
* \throw If the family field is missing for \a meshDimRelToMaxExt.
*/
-DataArrayInt *MEDFileMesh::getGroupArr(int meshDimRelToMaxExt, const char *grp, bool renum) const throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileMesh::getGroupArr(int meshDimRelToMaxExt, const char *grp, bool renum) const
{
std::vector<std::string> tmp(1);
tmp[0]=grp;
* \throw If the name of a nonexistent group is present in \a grps.
* \throw If the family field is missing for \a meshDimRelToMaxExt.
*/
-DataArrayInt *MEDFileMesh::getGroupsArr(int meshDimRelToMaxExt, const std::vector<std::string>& grps, bool renum) const throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileMesh::getGroupsArr(int meshDimRelToMaxExt, const std::vector<std::string>& grps, bool renum) const
{
std::vector<std::string> fams2=getFamiliesOnGroups(grps);
return getFamiliesArr(meshDimRelToMaxExt,fams2,renum);
* is to delete this array using decrRef() as it is no more needed.
* \throw If the family field is missing for \a meshDimRelToMaxExt.
*/
-DataArrayInt *MEDFileMesh::getFamilyArr(int meshDimRelToMaxExt, const char *fam, bool renum) const throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileMesh::getFamilyArr(int meshDimRelToMaxExt, const char *fam, bool renum) const
{
std::vector<std::string> tmp(1);
tmp[0]=fam;
* \throw If the name of a nonexistent group is specified.
* \throw If the family field is missing for nodes.
*/
-DataArrayInt *MEDFileMesh::getNodeGroupArr(const char *grp, bool renum) const throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileMesh::getNodeGroupArr(const char *grp, bool renum) const
{
std::vector<std::string> tmp(1);
tmp[0]=grp;
* \throw If the name of a nonexistent group is present in \a grps.
* \throw If the family field is missing for nodes.
*/
-DataArrayInt *MEDFileMesh::getNodeGroupsArr(const std::vector<std::string>& grps, bool renum) const throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileMesh::getNodeGroupsArr(const std::vector<std::string>& grps, bool renum) const
{
return getGroupsArr(1,grps,renum);
}
* \throw If the name of a nonexistent group is specified.
* \throw If the family field is missing for nodes.
*/
-DataArrayInt *MEDFileMesh::getNodeFamilyArr(const char *fam, bool renum) const throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileMesh::getNodeFamilyArr(const char *fam, bool renum) const
{
std::vector<std::string> tmp(1);
tmp[0]=fam;
* is to delete this array using decrRef() as it is no more needed.
* \throw If the family field is missing for nodes.
*/
-DataArrayInt *MEDFileMesh::getNodeFamiliesArr(const std::vector<std::string>& fams, bool renum) const throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileMesh::getNodeFamiliesArr(const std::vector<std::string>& fams, bool renum) const
{
return getFamiliesArr(1,fams,renum);
}
* \throw If \a grps includes invalid ids (or numbers if \a renum == \c true ).
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
*/
-void MEDFileMesh::setGroupsAtLevel(int meshDimRelToMaxExt, const std::vector<const DataArrayInt *>& grps, bool renum) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::setGroupsAtLevel(int meshDimRelToMaxExt, const std::vector<const DataArrayInt *>& grps, bool renum)
{
if(grps.empty())
return ;
}
}
+std::vector<int> MEDFileMesh::getDistributionOfTypes(int meshDimRelToMax) const
+{
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingMesh> mLev(getGenMeshAtLevel(meshDimRelToMax));
+ return mLev->getDistributionOfTypes();
+}
+
void MEDFileMesh::TranslateFamilyIds(int offset, DataArrayInt *famArr, std::vector< std::vector<int> >& famIdsPerGrp)
{
famArr->applyLin(offset>0?1:-1,offset,0);
* This method returns a name close to 'nameTry' so that it is not already into 'namesToAvoid'.
* If this method fails to find such a name it will throw an exception.
*/
-std::string MEDFileMesh::CreateNameNotIn(const std::string& nameTry, const std::vector<std::string>& namesToAvoid) throw(INTERP_KERNEL::Exception)
+std::string MEDFileMesh::CreateNameNotIn(const std::string& nameTry, const std::vector<std::string>& namesToAvoid)
{
//attempt #0
if(std::find(namesToAvoid.begin(),namesToAvoid.end(),nameTry)==namesToAvoid.end())
throw INTERP_KERNEL::Exception("MEDFileMesh::CreateNameNotIn : impossible to find a not already used name !");
}
-int MEDFileMesh::PutInThirdComponentOfCodeOffset(std::vector<int>& code, int strt) throw(INTERP_KERNEL::Exception)
+int MEDFileMesh::PutInThirdComponentOfCodeOffset(std::vector<int>& code, int strt)
{
std::size_t nbOfChunks=code.size()/3;
if(code.size()%3!=0)
* If _name is not empty and that 'm' has the same name nothing is done.
* If _name is not emplt and that 'm' has \b NOT the same name an exception is thrown.
*/
-void MEDFileMesh::dealWithTinyInfo(const MEDCouplingMesh *m) throw(INTERP_KERNEL::Exception)
+void MEDFileMesh::dealWithTinyInfo(const MEDCouplingMesh *m)
{
if(!m)
throw INTERP_KERNEL::Exception("MEDFileMesh::dealWithTinyInfo : input mesh in NULL !");
* \throw If there is no mesh with given attributes in the file.
* \throw If the mesh in the file is not an unstructured one.
*/
-MEDFileUMesh *MEDFileUMesh::New(const char *fileName, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+MEDFileUMesh *MEDFileUMesh::New(const char *fileName, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs)
{
MEDFileUtilities::CheckFileForRead(fileName);
MEDFileUtilities::AutoFid fid=MEDfileOpen(fileName,MED_ACC_RDONLY);
* \throw If there is no meshes in the file.
* \throw If the mesh in the file is not an unstructured one.
*/
-MEDFileUMesh *MEDFileUMesh::New(const char *fileName, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+MEDFileUMesh *MEDFileUMesh::New(const char *fileName, MEDFileMeshReadSelector *mrs)
{
std::vector<std::string> ms=MEDLoader::GetMeshNames(fileName);
if(ms.empty())
return new MEDFileUMesh;
}
-std::size_t MEDFileUMesh::getHeapMemorySize() const
+std::size_t MEDFileUMesh::getHeapMemorySizeWithoutChildren() const
+{
+ std::size_t ret(MEDFileMesh::getHeapMemorySizeWithoutChildren());
+ ret+=_ms.capacity()*(sizeof(MEDCouplingAutoRefCountObjectPtr<MEDFileUMeshSplitL1>));
+ return ret;
+}
+
+std::vector<const BigMemoryObject *> MEDFileUMesh::getDirectChildren() const
{
- std::size_t ret=MEDFileMesh::getHeapMemorySize();
+ std::vector<const BigMemoryObject *> ret(MEDFileMesh::getDirectChildren());
if((const DataArrayDouble*)_coords)
- ret+=_coords->getHeapMemorySize();
+ ret.push_back((const DataArrayDouble*)_coords);
if((const DataArrayInt *)_fam_coords)
- ret+=_fam_coords->getHeapMemorySize();
+ ret.push_back((const DataArrayInt *)_fam_coords);
if((const DataArrayInt *)_num_coords)
- ret+=_num_coords->getHeapMemorySize();
+ ret.push_back((const DataArrayInt *)_num_coords);
if((const DataArrayInt *)_rev_num_coords)
- ret+=_rev_num_coords->getHeapMemorySize();
+ ret.push_back((const DataArrayInt *)_rev_num_coords);
if((const DataArrayAsciiChar *)_name_coords)
- ret+=_name_coords->getHeapMemorySize();
- ret+=_ms.capacity()*(sizeof(MEDCouplingAutoRefCountObjectPtr<MEDFileUMeshSplitL1>));
+ ret.push_back((const DataArrayAsciiChar *)_name_coords);
for(std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileUMeshSplitL1> >::const_iterator it=_ms.begin();it!=_ms.end();it++)
if((const MEDFileUMeshSplitL1*) *it)
- ret+=(*it)->getHeapMemorySize();
+ ret.push_back((const MEDFileUMeshSplitL1*) *it);
return ret;
}
-MEDFileMesh *MEDFileUMesh::shallowCpy() const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileUMesh::shallowCpy() const
{
MEDCouplingAutoRefCountObjectPtr<MEDFileUMesh> ret=new MEDFileUMesh(*this);
return ret.retn();
}
-MEDFileMesh *MEDFileUMesh::createNewEmpty() const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileUMesh::createNewEmpty() const
{
return new MEDFileUMesh;
}
-MEDFileMesh *MEDFileUMesh::deepCpy() const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileUMesh::deepCpy() const
{
MEDCouplingAutoRefCountObjectPtr<MEDFileUMesh> ret=new MEDFileUMesh(*this);
if((const DataArrayDouble*)_coords)
for(std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileUMeshSplitL1> >::const_iterator it=_ms.begin();it!=_ms.end();it++,i++)
{
if((const MEDFileUMeshSplitL1 *)(*it))
- ret->_ms[i]=(*it)->deepCpy();
+ ret->_ms[i]=(*it)->deepCpy(ret->_coords);
}
return ret.retn();
}
{
}
-MEDFileUMesh::MEDFileUMesh(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+MEDFileUMesh::MEDFileUMesh(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs)
try
{
loadUMeshFromFile(fid,mName,dt,it,mrs);
throw e;
}
-void MEDFileUMesh::loadUMeshFromFile(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::loadUMeshFromFile(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs)
{
MEDFileUMeshL2 loaderl2;
ParaMEDMEM::MEDCouplingMeshType meshType;
std::ostringstream oss; oss << "Trying to load as unstructured an existing mesh with name '" << mName << "' !";
throw INTERP_KERNEL::Exception(oss.str().c_str());
}
- loaderl2.loadAll(fid,mid,mName,dt,it);
+ loaderl2.loadAll(fid,mid,mName,dt,it,mrs);
int lev=loaderl2.getNumberOfLevels();
_ms.resize(lev);
for(int i=0;i<lev;i++)
else
_ms[i]=0;
}
- MEDFileMeshL2::ReadFamiliesAndGrps(fid,mName,_families,_groups);
+ MEDFileMeshL2::ReadFamiliesAndGrps(fid,mName,_families,_groups,mrs);
//
setName(loaderl2.getName());
setDescription(loaderl2.getDescription());
setTimeValue(loaderl2.getTime());
setTimeUnit(loaderl2.getTimeUnit());
_coords=loaderl2.getCoords();
- _fam_coords=loaderl2.getCoordsFamily();
- _num_coords=loaderl2.getCoordsNum();
- _name_coords=loaderl2.getCoordsName();
+ if(!mrs || mrs->isNodeFamilyFieldReading())
+ _fam_coords=loaderl2.getCoordsFamily();
+ if(!mrs || mrs->isNodeNumFieldReading())
+ _num_coords=loaderl2.getCoordsNum();
+ if(!mrs || mrs->isNodeNameFieldReading())
+ _name_coords=loaderl2.getCoordsName();
computeRevNum();
}
{
}
-void MEDFileUMesh::writeLL(med_idt fid) const throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::writeLL(med_idt fid) const
{
const DataArrayDouble *coo=_coords;
INTERP_KERNEL::AutoPtr<char> maa=MEDLoaderBase::buildEmptyString(MED_NAME_SIZE);
* \param [in] grp - the name of the group of interest.
* \return std::vector<int> - a sequence of the relative dimensions.
*/
-std::vector<int> MEDFileUMesh::getGrpNonEmptyLevels(const char *grp) const throw(INTERP_KERNEL::Exception)
+std::vector<int> MEDFileUMesh::getGrpNonEmptyLevels(const char *grp) const
{
std::vector<std::string> fams=getFamiliesOnGroup(grp);
return getFamsNonEmptyLevels(fams);
* \param [in] grp - the name of the group of interest.
* \return std::vector<int> - a sequence of the relative dimensions.
*/
-std::vector<int> MEDFileUMesh::getGrpNonEmptyLevelsExt(const char *grp) const throw(INTERP_KERNEL::Exception)
+std::vector<int> MEDFileUMesh::getGrpNonEmptyLevelsExt(const char *grp) const
{
std::vector<std::string> fams=getFamiliesOnGroup(grp);
return getFamsNonEmptyLevelsExt(fams);
* \param [in] fam - the name of the family of interest.
* \return std::vector<int> - a sequence of the relative dimensions.
*/
-std::vector<int> MEDFileUMesh::getFamNonEmptyLevels(const char *fam) const throw(INTERP_KERNEL::Exception)
+std::vector<int> MEDFileUMesh::getFamNonEmptyLevels(const char *fam) const
{
std::vector<std::string> fams(1,std::string(fam));
return getFamsNonEmptyLevels(fams);
* \param [in] fam - the name of the family of interest.
* \return std::vector<int> - a sequence of the relative dimensions.
*/
-std::vector<int> MEDFileUMesh::getFamNonEmptyLevelsExt(const char *fam) const throw(INTERP_KERNEL::Exception)
+std::vector<int> MEDFileUMesh::getFamNonEmptyLevelsExt(const char *fam) const
{
std::vector<std::string> fams(1,std::string(fam));
return getFamsNonEmptyLevelsExt(fams);
* \param [in] grps - a sequence of names of the groups of interest.
* \return std::vector<int> - a sequence of the relative dimensions.
*/
-std::vector<int> MEDFileUMesh::getGrpsNonEmptyLevels(const std::vector<std::string>& grps) const throw(INTERP_KERNEL::Exception)
+std::vector<int> MEDFileUMesh::getGrpsNonEmptyLevels(const std::vector<std::string>& grps) const
{
std::vector<std::string> fams=getFamiliesOnGroups(grps);
return getFamsNonEmptyLevels(fams);
* \param [in] grps - a sequence of names of the groups of interest.
* \return std::vector<int> - a sequence of the relative dimensions.
*/
-std::vector<int> MEDFileUMesh::getGrpsNonEmptyLevelsExt(const std::vector<std::string>& grps) const throw(INTERP_KERNEL::Exception)
+std::vector<int> MEDFileUMesh::getGrpsNonEmptyLevelsExt(const std::vector<std::string>& grps) const
{
std::vector<std::string> fams=getFamiliesOnGroups(grps);
return getFamsNonEmptyLevelsExt(fams);
* \param [in] fams - the name of the family of interest.
* \return std::vector<int> - a sequence of the relative dimensions.
*/
-std::vector<int> MEDFileUMesh::getFamsNonEmptyLevels(const std::vector<std::string>& fams) const throw(INTERP_KERNEL::Exception)
+std::vector<int> MEDFileUMesh::getFamsNonEmptyLevels(const std::vector<std::string>& fams) const
{
std::vector<int> ret;
std::vector<int> levs=getNonEmptyLevels();
* \param [in] fams - the names of the families of interest.
* \return std::vector<int> - a sequence of the relative dimensions.
*/
-std::vector<int> MEDFileUMesh::getFamsNonEmptyLevelsExt(const std::vector<std::string>& fams) const throw(INTERP_KERNEL::Exception)
+std::vector<int> MEDFileUMesh::getFamsNonEmptyLevelsExt(const std::vector<std::string>& fams) const
{
std::vector<int> ret0=getFamsNonEmptyLevels(fams);
const DataArrayInt *famCoords=_fam_coords;
* \return std::vector<std::string> - a sequence of group names at \a meshDimRelToMaxExt
* level.
*/
-std::vector<std::string> MEDFileUMesh::getGroupsOnSpecifiedLev(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+std::vector<std::string> MEDFileUMesh::getGroupsOnSpecifiedLev(int meshDimRelToMaxExt) const
{
std::vector<std::string> ret;
std::vector<std::string> allGrps=getGroupsNames();
return ret;
}
-int MEDFileUMesh::getMaxAbsFamilyIdInArrays() const throw(INTERP_KERNEL::Exception)
+int MEDFileUMesh::getMaxAbsFamilyIdInArrays() const
{
int ret=-std::numeric_limits<int>::max(),tmp=-1;
if((const DataArrayInt *)_fam_coords)
return ret;
}
-int MEDFileUMesh::getMaxFamilyIdInArrays() const throw(INTERP_KERNEL::Exception)
+int MEDFileUMesh::getMaxFamilyIdInArrays() const
{
int ret=-std::numeric_limits<int>::max(),tmp=-1;
if((const DataArrayInt *)_fam_coords)
return ret;
}
-int MEDFileUMesh::getMinFamilyIdInArrays() const throw(INTERP_KERNEL::Exception)
+int MEDFileUMesh::getMinFamilyIdInArrays() const
{
int ret=std::numeric_limits<int>::max(),tmp=-1;
if((const DataArrayInt *)_fam_coords)
* \return int - the mesh dimension.
* \throw If there are no cells in this mesh.
*/
-int MEDFileUMesh::getMeshDimension() const throw(INTERP_KERNEL::Exception)
+int MEDFileUMesh::getMeshDimension() const
{
int lev=0;
for(std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileUMeshSplitL1> >::const_iterator it=_ms.begin();it!=_ms.end();it++,lev++)
* \return int - the space dimension of \a this mesh.
* \throw If the node coordinates array is not available.
*/
-int MEDFileUMesh::getSpaceDimension() const throw(INTERP_KERNEL::Exception)
+int MEDFileUMesh::getSpaceDimension() const
{
const DataArrayDouble *coo=_coords;
if(!coo)
* \return int - the number of entities.
* \throw If no mesh entities of dimension \a meshDimRelToMaxExt are available in \a this mesh.
*/
-int MEDFileUMesh::getSizeAtLevel(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+int MEDFileUMesh::getSizeAtLevel(int meshDimRelToMaxExt) const
{
if(meshDimRelToMaxExt==1)
{
* \return const DataArrayInt * - the family field. It is an array of ids of families
* each mesh entity belongs to. It can be \c NULL.
*/
-const DataArrayInt *MEDFileUMesh::getFamilyFieldAtLevel(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+const DataArrayInt *MEDFileUMesh::getFamilyFieldAtLevel(int meshDimRelToMaxExt) const
{
if(meshDimRelToMaxExt==1)
return _fam_coords;
* \return const DataArrayInt * - the array of the entity numbers.
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
*/
-const DataArrayInt *MEDFileUMesh::getNumberFieldAtLevel(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+const DataArrayInt *MEDFileUMesh::getNumberFieldAtLevel(int meshDimRelToMaxExt) const
{
if(meshDimRelToMaxExt==1)
return _num_coords;
return l1->getNumberField();
}
-const DataArrayAsciiChar *MEDFileUMesh::getNameFieldAtLevel(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+const DataArrayAsciiChar *MEDFileUMesh::getNameFieldAtLevel(int meshDimRelToMaxExt) const
{
if(meshDimRelToMaxExt==1)
return _name_coords;
return l1->getNameField();
}
-int MEDFileUMesh::getNumberOfNodes() const throw(INTERP_KERNEL::Exception)
+int MEDFileUMesh::getNumberOfNodes() const
{
const DataArrayDouble *coo=_coords;
if(!coo)
return coo->getNumberOfTuples();
}
+void MEDFileUMesh::whichAreNodesFetched(const MEDFileField1TSStructItem& st, const MEDFileFieldGlobsReal *globs, std::vector<bool>& nodesFetched) const
+{
+ std::size_t sz(st.getNumberOfItems());
+ for(std::size_t i=0;i<sz;i++)
+ {
+ INTERP_KERNEL::NormalizedCellType curGt(st[i].getGeo());
+ const MEDCoupling1GTUMesh *m(getDirectUndergroundSingleGeoTypeMesh(curGt));
+ if(st[i].getPflName().empty())
+ m->computeNodeIdsAlg(nodesFetched);
+ else
+ {
+ const DataArrayInt *arr(globs->getProfile(st[i].getPflName().c_str()));
+ MEDCouplingAutoRefCountObjectPtr<MEDCoupling1GTUMesh> m2(dynamic_cast<MEDCoupling1GTUMesh *>(m->buildPartOfMySelf(arr->begin(),arr->end(),true)));
+ m2->computeNodeIdsAlg(nodesFetched);
+ }
+ }
+}
+
/*!
* Returns the optional numbers of mesh entities of a given dimension transformed using
* DataArrayInt::invertArrayN2O2O2N().
* DataArrayInt::invertArrayN2O2O2N().
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
*/
-const DataArrayInt *MEDFileUMesh::getRevNumberFieldAtLevel(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+const DataArrayInt *MEDFileUMesh::getRevNumberFieldAtLevel(int meshDimRelToMaxExt) const
{
if(meshDimRelToMaxExt==1)
{
* \throw If the name of a nonexistent group is specified.
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
*/
-MEDCouplingUMesh *MEDFileUMesh::getGroup(int meshDimRelToMaxExt, const char *grp, bool renum) const throw(INTERP_KERNEL::Exception)
+MEDCouplingUMesh *MEDFileUMesh::getGroup(int meshDimRelToMaxExt, const char *grp, bool renum) const
{
synchronizeTinyInfoOnLeaves();
std::vector<std::string> tmp(1);
* \throw If a name of a nonexistent group is present in \a grps.
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
*/
-MEDCouplingUMesh *MEDFileUMesh::getGroups(int meshDimRelToMaxExt, const std::vector<std::string>& grps, bool renum) const throw(INTERP_KERNEL::Exception)
+MEDCouplingUMesh *MEDFileUMesh::getGroups(int meshDimRelToMaxExt, const std::vector<std::string>& grps, bool renum) const
{
synchronizeTinyInfoOnLeaves();
std::vector<std::string> fams2=getFamiliesOnGroups(grps);
* \throw If a name of a nonexistent family is present in \a grps.
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
*/
-MEDCouplingUMesh *MEDFileUMesh::getFamily(int meshDimRelToMaxExt, const char *fam, bool renum) const throw(INTERP_KERNEL::Exception)
+MEDCouplingUMesh *MEDFileUMesh::getFamily(int meshDimRelToMaxExt, const char *fam, bool renum) const
{
synchronizeTinyInfoOnLeaves();
std::vector<std::string> tmp(1);
* \throw If a name of a nonexistent family is present in \a fams.
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
*/
-MEDCouplingUMesh *MEDFileUMesh::getFamilies(int meshDimRelToMaxExt, const std::vector<std::string>& fams, bool renum) const throw(INTERP_KERNEL::Exception)
+MEDCouplingUMesh *MEDFileUMesh::getFamilies(int meshDimRelToMaxExt, const std::vector<std::string>& fams, bool renum) const
{
synchronizeTinyInfoOnLeaves();
if(meshDimRelToMaxExt==1)
* is to delete this array using decrRef() as it is no more needed.
* \throw If the family field is missing for \a meshDimRelToMaxExt.
*/
-DataArrayInt *MEDFileUMesh::getFamiliesArr(int meshDimRelToMaxExt, const std::vector<std::string>& fams, bool renum) const throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileUMesh::getFamiliesArr(int meshDimRelToMaxExt, const std::vector<std::string>& fams, bool renum) const
{
std::vector<int> famIds=getFamiliesIds(fams);
if(meshDimRelToMaxExt==1)
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
* \sa getGenMeshAtLevel()
*/
-MEDCouplingUMesh *MEDFileUMesh::getMeshAtLevel(int meshDimRelToMaxExt, bool renum) const throw(INTERP_KERNEL::Exception)
+MEDCouplingUMesh *MEDFileUMesh::getMeshAtLevel(int meshDimRelToMaxExt, bool renum) const
{
synchronizeTinyInfoOnLeaves();
if(meshDimRelToMaxExt==1)
MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> cc=_coords->deepCpy();
umesh->setCoords(cc);
MEDFileUMeshSplitL1::ClearNonDiscrAttributes(umesh);
- umesh->setName(getName());
+ umesh->setName(getName().c_str());
return umesh;
}
}
* \throw If there are no mesh entities of \a meshDimRelToMax dimension in \a this mesh.
* \sa getMeshAtLevel()
*/
-MEDCouplingMesh *MEDFileUMesh::getGenMeshAtLevel(int meshDimRelToMax, bool renum) const throw(INTERP_KERNEL::Exception)
+MEDCouplingMesh *MEDFileUMesh::getGenMeshAtLevel(int meshDimRelToMax, bool renum) const
{
return getMeshAtLevel(meshDimRelToMax,renum);
}
+std::vector<int> MEDFileUMesh::getDistributionOfTypes(int meshDimRelToMax) const
+{
+ const MEDFileUMeshSplitL1 *l1(getMeshAtLevSafe(meshDimRelToMax));
+ return l1->getDistributionOfTypes();
+}
+
/*!
* Returns a MEDCouplingUMesh of a relative dimension == 0.
* \param [in] renum - if \c true, the returned mesh is permuted according to the
* delete using decrRef() as it is no more needed.
* \throw If there are no mesh entities of the relative dimension == 0 in \a this mesh.
*/
-MEDCouplingUMesh *MEDFileUMesh::getLevel0Mesh(bool renum) const throw(INTERP_KERNEL::Exception)
+MEDCouplingUMesh *MEDFileUMesh::getLevel0Mesh(bool renum) const
{
return getMeshAtLevel(0,renum);
}
* delete using decrRef() as it is no more needed.
* \throw If there are no mesh entities of the relative dimension == -1 in \a this mesh.
*/
-MEDCouplingUMesh *MEDFileUMesh::getLevelM1Mesh(bool renum) const throw(INTERP_KERNEL::Exception)
+MEDCouplingUMesh *MEDFileUMesh::getLevelM1Mesh(bool renum) const
{
return getMeshAtLevel(-1,renum);
}
* delete using decrRef() as it is no more needed.
* \throw If there are no mesh entities of the relative dimension == -2 in \a this mesh.
*/
-MEDCouplingUMesh *MEDFileUMesh::getLevelM2Mesh(bool renum) const throw(INTERP_KERNEL::Exception)
+MEDCouplingUMesh *MEDFileUMesh::getLevelM2Mesh(bool renum) const
{
return getMeshAtLevel(-2,renum);
}
* delete using decrRef() as it is no more needed.
* \throw If there are no mesh entities of the relative dimension == -3 in \a this mesh.
*/
-MEDCouplingUMesh *MEDFileUMesh::getLevelM3Mesh(bool renum) const throw(INTERP_KERNEL::Exception)
+MEDCouplingUMesh *MEDFileUMesh::getLevelM3Mesh(bool renum) const
{
return getMeshAtLevel(-3,renum);
}
-const MEDFileUMeshSplitL1 *MEDFileUMesh::getMeshAtLevSafe(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+/*!
+ * This method returns a vector of mesh parts containing each exactly one geometric type.
+ * This method will never launch an automatic computation of split by type (an INTERP_KERNEL::Exception will be then thrown).
+ * This method is only for memory aware users.
+ * The returned pointers are **NOT** new object pointer. No need to mange them.
+ */
+std::vector<MEDCoupling1GTUMesh *> MEDFileUMesh::getDirectUndergroundSingleGeoTypeMeshes(int meshDimRelToMax) const
+{
+ const MEDFileUMeshSplitL1 *sp(getMeshAtLevSafe(meshDimRelToMax));
+ return sp->getDirectUndergroundSingleGeoTypeMeshes();
+}
+
+/*!
+ * This method returns the part of \a this having the geometric type \a gt.
+ * If such part is not existing an exception will be thrown.
+ * The returned pointer is **NOT** new object pointer. No need to mange it.
+ */
+MEDCoupling1GTUMesh *MEDFileUMesh::getDirectUndergroundSingleGeoTypeMesh(INTERP_KERNEL::NormalizedCellType gt) const
+{
+ const INTERP_KERNEL::CellModel& cm=INTERP_KERNEL::CellModel::GetCellModel(gt);
+ int lev=(int)cm.getDimension()-getMeshDimension();
+ const MEDFileUMeshSplitL1 *sp(getMeshAtLevSafe(lev));
+ return sp->getDirectUndergroundSingleGeoTypeMesh(gt);
+}
+
+/*!
+ * Given a relative level \a meshDimRelToMax it returns the sorted vector of geometric types present in \a this.
+ * \throw if the reqsuested \a meshDimRelToMax does not exist.
+ */
+std::vector<INTERP_KERNEL::NormalizedCellType> MEDFileUMesh::getGeoTypesAtLevel(int meshDimRelToMax) const
+{
+ const MEDFileUMeshSplitL1 *sp(getMeshAtLevSafe(meshDimRelToMax));
+ return sp->getGeoTypes();
+}
+
+/*!
+ * This method extracts from whole family field ids the part relative to the input parameter \a gt.
+ * \param [in] gt - the geometric type for which the family field is asked.
+ * \return DataArrayInt * - a pointer to DataArrayInt that the caller is to
+ * delete using decrRef() as it is no more needed.
+ * \sa MEDFileUMesh::extractNumberFieldOnGeoType
+ */
+DataArrayInt *MEDFileUMesh::extractFamilyFieldOnGeoType(INTERP_KERNEL::NormalizedCellType gt) const
+{
+ const INTERP_KERNEL::CellModel& cm=INTERP_KERNEL::CellModel::GetCellModel(gt);
+ int lev=(int)cm.getDimension()-getMeshDimension();
+ const MEDFileUMeshSplitL1 *sp(getMeshAtLevSafe(lev));
+ return sp->extractFamilyFieldOnGeoType(gt);
+}
+
+/*!
+ * This method extracts from whole number field ids the part relative to the input parameter \a gt.
+ * \param [in] gt - the geometric type for which the number field is asked.
+ * \return DataArrayInt * - a pointer to DataArrayInt that the caller is to
+ * delete using decrRef() as it is no more needed.
+ * \sa MEDFileUMesh::extractFamilyFieldOnGeoType
+ */
+DataArrayInt *MEDFileUMesh::extractNumberFieldOnGeoType(INTERP_KERNEL::NormalizedCellType gt) const
+{
+ const INTERP_KERNEL::CellModel& cm=INTERP_KERNEL::CellModel::GetCellModel(gt);
+ int lev=(int)cm.getDimension()-getMeshDimension();
+ const MEDFileUMeshSplitL1 *sp(getMeshAtLevSafe(lev));
+ return sp->extractNumberFieldOnGeoType(gt);
+}
+
+const MEDFileUMeshSplitL1 *MEDFileUMesh::getMeshAtLevSafe(int meshDimRelToMaxExt) const
{
if(meshDimRelToMaxExt==1)
throw INTERP_KERNEL::Exception("Dimension request is invalid : asking for node level (1) !");
return _ms[tracucedRk];
}
-MEDFileUMeshSplitL1 *MEDFileUMesh::getMeshAtLevSafe(int meshDimRelToMaxExt) throw(INTERP_KERNEL::Exception)
+MEDFileUMeshSplitL1 *MEDFileUMesh::getMeshAtLevSafe(int meshDimRelToMaxExt)
{
if(meshDimRelToMaxExt==1)
throw INTERP_KERNEL::Exception("Dimension request is invalid : asking for node level (1) !");
return _ms[tracucedRk];
}
-void MEDFileUMesh::checkMeshDimCoherency(int meshDim, int meshDimRelToMax) const throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::checkMeshDimCoherency(int meshDim, int meshDimRelToMax) const
{
if(-meshDimRelToMax>=(int)_ms.size())
throw INTERP_KERNEL::Exception("MEDFileUMesh::checkMeshDimCoherency : The meshdim of mesh is not managed by 'this' !");
* \param [in] coords - the new node coordinates array.
* \throw If \a coords == \c NULL.
*/
-
-void MEDFileUMesh::setCoords(DataArrayDouble *coords) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::setCoords(DataArrayDouble *coords)
{
if(!coords)
throw INTERP_KERNEL::Exception("MEDFileUMesh::setCoords : null pointer in input !");
_fam_coords=DataArrayInt::New();
_fam_coords->alloc(nbOfTuples,1);
_fam_coords->fillWithZero();
+ for(std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileUMeshSplitL1> >::iterator it=_ms.begin();it!=_ms.end();it++)
+ if((MEDFileUMeshSplitL1 *)(*it))
+ (*it)->setCoords(coords);
}
/*!
* \param [in] meshDimRelToMaxExt - the relative dimension of interest.
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
*/
-void MEDFileUMesh::eraseGroupsAtLevel(int meshDimRelToMaxExt) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::eraseGroupsAtLevel(int meshDimRelToMaxExt)
{
if(meshDimRelToMaxExt==1)
{
/*!
* Removes all families with ids not present in the family fields of \a this mesh.
*/
-void MEDFileUMesh::optimizeFamilies() throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::optimizeFamilies()
{
std::vector<int> levs=getNonEmptyLevelsExt();
std::set<int> allFamsIds;
_groups.erase(*it);
}
-void MEDFileUMesh::duplicateNodesOnM1Group(const char *grpNameM1, DataArrayInt *&nodesDuplicated, DataArrayInt *&cellsModified, DataArrayInt *&cellsNotModified) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::duplicateNodesOnM1Group(const char *grpNameM1, DataArrayInt *&nodesDuplicated, DataArrayInt *&cellsModified, DataArrayInt *&cellsNotModified)
{
std::vector<int> levs=getNonEmptyLevels();
if(std::find(levs.begin(),levs.end(),0)==levs.end() || std::find(levs.begin(),levs.end(),-1)==levs.end())
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> szOfCellGrpOfSameType(tmp00);
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> idInMsOfCellGrpOfSameType(tmp11);
//
- newm1->setName(getName());
+ newm1->setName(getName().c_str());
const DataArrayInt *fam=getFamilyFieldAtLevel(-1);
if(!fam)
throw INTERP_KERNEL::Exception("MEDFileUMesh::duplicateNodesOnM1Group : internal problem !");
* \return false if no modification has been performed linked to the unpolyzation. Neither cell type, not cell numbers. When false is returned no need of field on cells or on gauss renumbering.
* Inversely, if true is returned, it means that distribution of cell by geometric type has changed and field on cell and field on gauss point must be renumbered.
*/
-bool MEDFileUMesh::unPolyze(std::vector<int>& oldCode, std::vector<int>& newCode, DataArrayInt *& o2nRenumCell) throw(INTERP_KERNEL::Exception)
+bool MEDFileUMesh::unPolyze(std::vector<int>& oldCode, std::vector<int>& newCode, DataArrayInt *& o2nRenumCell)
{
o2nRenumCell=0; oldCode.clear(); newCode.clear();
std::vector<int> levs=getNonEmptyLevels();
* \throw If no coordinates are set in \a this or if there is in any available mesh in \a this a cell having a nodal connectivity containing a node id not in the range of
* set coordinates.
*/
-DataArrayInt *MEDFileUMesh::zipCoords() throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileUMesh::zipCoords()
{
const DataArrayDouble *coo=getCoords();
if(!coo)
* \throw If \a ids does not respect the MED file norm.
* \throw If a group with name \a ids->getName() already exists.
*/
-void MEDFileUMesh::addNodeGroup(const DataArrayInt *ids) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::addNodeGroup(const DataArrayInt *ids)
{
const DataArrayDouble *coords=_coords;
if(!coords)
* \throw If \a ids does not respect the MED file norm.
* \throw If a group with name \a ids->getName() already exists.
*/
-void MEDFileUMesh::addGroup(int meshDimRelToMaxExt, const DataArrayInt *ids) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::addGroup(int meshDimRelToMaxExt, const DataArrayInt *ids)
{
std::vector<int> levs=getNonEmptyLevelsExt();
if(std::find(levs.begin(),levs.end(),meshDimRelToMaxExt)==levs.end())
* \param [in] ids ids and group name of the new group to add. The ids should be sorted and different each other (MED file norm).
* \parma [in,out] famArr family array on level of interest to be renumbered. The input pointer should be not \c NULL (no check of that will be performed)
*/
-void MEDFileUMesh::addGroupUnderground(bool isNodeGroup, const DataArrayInt *ids, DataArrayInt *famArr) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::addGroupUnderground(bool isNodeGroup, const DataArrayInt *ids, DataArrayInt *famArr)
{
if(!ids)
throw INTERP_KERNEL::Exception("MEDFileUMesh::addGroup : NULL pointer in input !");
* \param [in] newFamName - the new family name.
* \throw If no family with the given \a id exists.
*/
-void MEDFileUMesh::setFamilyNameAttachedOnId(int id, const std::string& newFamName) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::setFamilyNameAttachedOnId(int id, const std::string& newFamName)
{
std::string oldName=getFamilyNameGivenId(id);
_families.erase(oldName);
* \param [in] meshDimRelToMax - the relative dimension of interest.
* \throw If there is no mesh at level \a meshDimRelToMax in \a this mesh.
*/
-void MEDFileUMesh::removeMeshAtLevel(int meshDimRelToMax) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::removeMeshAtLevel(int meshDimRelToMax)
{
std::vector<int> levSet=getNonEmptyLevels();
std::vector<int>::const_iterator it=std::find(levSet.begin(),levSet.end(),meshDimRelToMax);
_ms[pos]=0;
}
+/*!
+ * Sets a new MEDCoupling1GTUMesh at a given level in \a this mesh.
+ * \param [in] meshDimRelToMax - a relative level to set the mesh at.
+ * \param [in] m - the new mesh to set.
+ * \throw If the name or the description of \a this mesh and \a m are not empty and are
+ * different.
+ * \throw If the node coordinates array is set \a this in mesh and \a m refers to
+ * another node coordinates array.
+ * \throw If the mesh dimension of \a m does not correspond to \a meshDimRelToMax or
+ * to the existing meshes of other levels of \a this mesh.
+ */
+void MEDFileUMesh::setMeshAtLevel(int meshDimRelToMax, MEDCoupling1GTUMesh *m)
+{
+ MEDCouplingAutoRefCountObjectPtr<MEDFileUMeshSplitL1> elt(new MEDFileUMeshSplitL1(m));
+ checkAndGiveEntryInSplitL1(meshDimRelToMax,m)=elt;
+}
+
/*!
* Sets a new MEDCouplingUMesh at a given level in \a this mesh.
* \param [in] meshDimRelToMax - a relative level to set the mesh at.
* \throw If the mesh dimension of \a m does not correspond to \a meshDimRelToMax or
* to the existing meshes of other levels of \a this mesh.
*/
-void MEDFileUMesh::setMeshAtLevel(int meshDimRelToMax, MEDCouplingUMesh *m, bool newOrOld) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::setMeshAtLevel(int meshDimRelToMax, MEDCouplingUMesh *m, bool newOrOld)
+{
+ MEDCouplingAutoRefCountObjectPtr<MEDFileUMeshSplitL1> elt(new MEDFileUMeshSplitL1(m,newOrOld));
+ checkAndGiveEntryInSplitL1(meshDimRelToMax,m)=elt;
+}
+
+MEDCouplingAutoRefCountObjectPtr<MEDFileUMeshSplitL1>& MEDFileUMesh::checkAndGiveEntryInSplitL1(int meshDimRelToMax, MEDCouplingPointSet *m)
{
dealWithTinyInfo(m);
std::vector<int> levSet=getNonEmptyLevels();
if(sz>=(int)_ms.size())
_ms.resize(sz);
checkMeshDimCoherency(m->getMeshDimension(),meshDimRelToMax);
- _ms[sz-1]=new MEDFileUMeshSplitL1(m,newOrOld);
+ return _ms[sz-1];
}
else
- _ms[-meshDimRelToMax]=new MEDFileUMeshSplitL1(m,newOrOld);
+ return _ms[-meshDimRelToMax];
}
/*!
* \throw If \a there is a null pointer in \a ms.
* \sa MEDFileUMesh::setMeshAtLevel
*/
-void MEDFileUMesh::setMeshes(const std::vector<const MEDCouplingUMesh *>& ms, bool renum) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::setMeshes(const std::vector<const MEDCouplingUMesh *>& ms, bool renum)
{
if(ms.empty())
return ;
for(std::vector<const MEDCouplingUMesh *>::const_iterator it=ms.begin();it!=ms.end();it++)
{
int mdim=(*it)->getMeshDimension();
- setName((*it)->getName());
+ setName((*it)->getName().c_str());
setMeshAtLevel(mdim-zeDim,const_cast<MEDCouplingUMesh *>(*it),renum);
}
setName(name.c_str());
* \throw If names of some meshes in \a ms are equal.
* \throw If \a ms includes a mesh with an empty name.
*/
-void MEDFileUMesh::setGroupsFromScratch(int meshDimRelToMax, const std::vector<const MEDCouplingUMesh *>& ms, bool renum) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::setGroupsFromScratch(int meshDimRelToMax, const std::vector<const MEDCouplingUMesh *>& ms, bool renum)
{
if(ms.empty())
throw INTERP_KERNEL::Exception("MEDFileUMesh::setGroupsFromScratch : expecting a non empty vector !");
* \throw If names of some meshes in \a ms are equal.
* \throw If \a ms includes a mesh with an empty name.
*/
-void MEDFileUMesh::setGroupsOnSetMesh(int meshDimRelToMax, const std::vector<const MEDCouplingUMesh *>& ms, bool renum) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::setGroupsOnSetMesh(int meshDimRelToMax, const std::vector<const MEDCouplingUMesh *>& ms, bool renum)
{
if(ms.empty())
throw INTERP_KERNEL::Exception("MEDFileUMesh::setGroupsOnSetMesh : expecting a non empty vector !");
setGroupsAtLevel(meshDimRelToMax,corr2,renum);
}
-DataArrayDouble *MEDFileUMesh::checkMultiMesh(const std::vector<const MEDCouplingUMesh *>& ms) const throw(INTERP_KERNEL::Exception)
+DataArrayDouble *MEDFileUMesh::checkMultiMesh(const std::vector<const MEDCouplingUMesh *>& ms) const
{
const DataArrayDouble *ret=ms[0]->getCoords();
int mdim=ms[0]->getMeshDimension();
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
* \throw If \a famArr has an invalid size.
*/
-void MEDFileUMesh::setFamilyFieldArr(int meshDimRelToMaxExt, DataArrayInt *famArr) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::setFamilyFieldArr(int meshDimRelToMaxExt, DataArrayInt *famArr)
{
if(meshDimRelToMaxExt==1)
{
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
* \throw If \a renumArr has an invalid size.
*/
-void MEDFileUMesh::setRenumFieldArr(int meshDimRelToMaxExt, DataArrayInt *renumArr) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::setRenumFieldArr(int meshDimRelToMaxExt, DataArrayInt *renumArr)
{
if(meshDimRelToMaxExt==1)
{
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
* \throw If \a nameArr has an invalid size.
*/
-void MEDFileUMesh::setNameFieldAtLevel(int meshDimRelToMaxExt, DataArrayAsciiChar *nameArr) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::setNameFieldAtLevel(int meshDimRelToMaxExt, DataArrayAsciiChar *nameArr)
{
if(meshDimRelToMaxExt==1)
{
/*!
* This method is called by MEDFileMesh::changeFamilyId. It performs only one part of the family id modification.
*/
-void MEDFileUMesh::changeFamilyIdArr(int oldId, int newId) throw(INTERP_KERNEL::Exception)
+void MEDFileUMesh::changeFamilyIdArr(int oldId, int newId)
{
DataArrayInt *arr=_fam_coords;
if(arr)
}
}
-std::size_t MEDFileStructuredMesh::getHeapMemorySize() const
+std::size_t MEDFileStructuredMesh::getHeapMemorySizeWithoutChildren() const
{
- std::size_t ret=MEDFileMesh::getHeapMemorySize();
- if((const DataArrayInt*)_fam_nodes)
- ret+=_fam_nodes->getHeapMemorySize();
- if((const DataArrayInt*)_num_nodes)
- ret+=_num_nodes->getHeapMemorySize();
- if((const DataArrayInt*)_fam_cells)
- ret+=_fam_cells->getHeapMemorySize();
- if((const DataArrayInt*)_num_cells)
- ret+=_num_cells->getHeapMemorySize();
- if((const DataArrayInt*)_rev_num_nodes)
- ret+=_rev_num_nodes->getHeapMemorySize();
- if((const DataArrayInt*)_rev_num_cells)
- ret+=_rev_num_cells->getHeapMemorySize();
+ return MEDFileMesh::getHeapMemorySizeWithoutChildren();
+}
+
+std::vector<const BigMemoryObject *> MEDFileStructuredMesh::getDirectChildren() const
+{
+ std::vector<const BigMemoryObject *> ret(MEDFileMesh::getDirectChildren());
+ if((const DataArrayInt *)_fam_nodes)
+ ret.push_back((const DataArrayInt *)_fam_nodes);
+ if((const DataArrayInt *)_num_nodes)
+ ret.push_back((const DataArrayInt *)_num_nodes);
+ if((const DataArrayInt *)_fam_cells)
+ ret.push_back((const DataArrayInt *)_fam_cells);
+ if((const DataArrayInt *)_num_cells)
+ ret.push_back((const DataArrayInt *)_num_nodes);
+ if((const DataArrayInt *)_rev_num_nodes)
+ ret.push_back((const DataArrayInt *)_rev_num_nodes);
+ if((const DataArrayInt *)_rev_num_cells)
+ ret.push_back((const DataArrayInt *)_rev_num_cells);
return ret;
}
-int MEDFileStructuredMesh::getMaxAbsFamilyIdInArrays() const throw(INTERP_KERNEL::Exception)
+int MEDFileStructuredMesh::getMaxAbsFamilyIdInArrays() const
{
int ret=-std::numeric_limits<int>::max(),tmp=-1;
if((const DataArrayInt *)_fam_nodes)
return ret;
}
-int MEDFileStructuredMesh::getMaxFamilyIdInArrays() const throw(INTERP_KERNEL::Exception)
+int MEDFileStructuredMesh::getMaxFamilyIdInArrays() const
{
int ret=-std::numeric_limits<int>::max(),tmp=-1;
if((const DataArrayInt *)_fam_nodes)
return ret;
}
-int MEDFileStructuredMesh::getMinFamilyIdInArrays() const throw(INTERP_KERNEL::Exception)
+int MEDFileStructuredMesh::getMinFamilyIdInArrays() const
{
int ret=std::numeric_limits<int>::max(),tmp=-1;
if((const DataArrayInt *)_fam_nodes)
* is to delete this array using decrRef() as it is no more needed.
* \throw If the family field is missing for \a meshDimRelToMaxExt.
*/
-DataArrayInt *MEDFileStructuredMesh::getFamiliesArr(int meshDimRelToMaxExt, const std::vector<std::string>& fams, bool renum) const throw(INTERP_KERNEL::Exception)
+DataArrayInt *MEDFileStructuredMesh::getFamiliesArr(int meshDimRelToMaxExt, const std::vector<std::string>& fams, bool renum) const
{
if(meshDimRelToMaxExt!=0 && meshDimRelToMaxExt!=1)
throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::getFamiliesArr : Only available for levels 0 or 1 !");
* \throw If \a famArr has an invalid size.
* \throw If \a meshDimRelToMaxExt != 0 and \a meshDimRelToMaxExt != 1.
*/
-void MEDFileStructuredMesh::setFamilyFieldArr(int meshDimRelToMaxExt, DataArrayInt *famArr) throw(INTERP_KERNEL::Exception)
+void MEDFileStructuredMesh::setFamilyFieldArr(int meshDimRelToMaxExt, DataArrayInt *famArr)
{
if(meshDimRelToMaxExt!=0 && meshDimRelToMaxExt!=1)
throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::setRenumFieldArr : Only available for levels 0 or 1 !");
* \throw If \a renumArr has an invalid size.
* \throw If \a meshDimRelToMaxExt != 0 and \a meshDimRelToMaxExt != 1.
*/
-void MEDFileStructuredMesh::setRenumFieldArr(int meshDimRelToMaxExt, DataArrayInt *renumArr) throw(INTERP_KERNEL::Exception)
+void MEDFileStructuredMesh::setRenumFieldArr(int meshDimRelToMaxExt, DataArrayInt *renumArr)
{
if(meshDimRelToMaxExt!=0 && meshDimRelToMaxExt!=1)
throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::setRenumFieldArr : Only available for levels 0 or 1 !");
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
* \throw If \a nameArr has an invalid size.
*/
-void MEDFileStructuredMesh::setNameFieldAtLevel(int meshDimRelToMaxExt, DataArrayAsciiChar *nameArr) throw(INTERP_KERNEL::Exception)
+void MEDFileStructuredMesh::setNameFieldAtLevel(int meshDimRelToMaxExt, DataArrayAsciiChar *nameArr)
{
if(meshDimRelToMaxExt!=0 && meshDimRelToMaxExt!=1)
throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::setNameFieldAtLevel : Only available for levels 0 or 1 !");
* each mesh entity belongs to. It can be \c NULL.
* \throw If \a meshDimRelToMaxExt != 0 and \a meshDimRelToMaxExt != 1.
*/
-const DataArrayInt *MEDFileStructuredMesh::getFamilyFieldAtLevel(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+const DataArrayInt *MEDFileStructuredMesh::getFamilyFieldAtLevel(int meshDimRelToMaxExt) const
{
if(meshDimRelToMaxExt!=0 && meshDimRelToMaxExt!=1)
throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::getFamilyFieldAtLevel : Only available for levels 0 or 1 !");
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
* \throw If \a meshDimRelToMaxExt != 0 and \a meshDimRelToMaxExt != 1.
*/
-const DataArrayInt *MEDFileStructuredMesh::getNumberFieldAtLevel(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+const DataArrayInt *MEDFileStructuredMesh::getNumberFieldAtLevel(int meshDimRelToMaxExt) const
{
if(meshDimRelToMaxExt!=0 && meshDimRelToMaxExt!=1)
throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::getNumberFieldAtLevel : Only available for levels 0 or 1 !");
* \throw If \a meshDimRelToMaxExt != 0 and \a meshDimRelToMaxExt != 1.
* \throw If there are no mesh entities of \a meshDimRelToMaxExt dimension in \a this mesh.
*/
-const DataArrayInt *MEDFileStructuredMesh::getRevNumberFieldAtLevel(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+const DataArrayInt *MEDFileStructuredMesh::getRevNumberFieldAtLevel(int meshDimRelToMaxExt) const
{
if(meshDimRelToMaxExt!=0 && meshDimRelToMaxExt!=1)
throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::getRevNumberFieldAtLevel : Only available for levels 0 or 1 !");
}
}
-const DataArrayAsciiChar *MEDFileStructuredMesh::getNameFieldAtLevel(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+const DataArrayAsciiChar *MEDFileStructuredMesh::getNameFieldAtLevel(int meshDimRelToMaxExt) const
{
if(meshDimRelToMaxExt!=0 && meshDimRelToMaxExt!=1)
throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::getNameFieldAtLevel : Only available for levels 0 or 1 !");
/*!
* no implementation here, it is not a bug, but intresically no polyhedra in \a this.
*/
-bool MEDFileStructuredMesh::unPolyze(std::vector<int>& oldCode, std::vector<int>& newCode, DataArrayInt *& o2nRenumCell) throw(INTERP_KERNEL::Exception)
+bool MEDFileStructuredMesh::unPolyze(std::vector<int>& oldCode, std::vector<int>& newCode, DataArrayInt *& o2nRenumCell)
{
oldCode.clear(); newCode.clear(); o2nRenumCell=0;
return false;
}
-void MEDFileStructuredMesh::changeFamilyIdArr(int oldId, int newId) throw(INTERP_KERNEL::Exception)
+void MEDFileStructuredMesh::changeFamilyIdArr(int oldId, int newId)
{
DataArrayInt *arr=_fam_nodes;
if(arr)
arr->changeValue(oldId,newId);
}
-void MEDFileStructuredMesh::deepCpyAttributes() throw(INTERP_KERNEL::Exception)
+void MEDFileStructuredMesh::deepCpyAttributes()
{
if((const DataArrayInt*)_fam_nodes)
_fam_nodes=_fam_nodes->deepCpy();
* \return MEDCouplingMesh * - a pointer to MEDCouplingMesh that the caller is to
* delete using decrRef() as it is no more needed.
*/
-MEDCouplingMesh *MEDFileStructuredMesh::getGenMeshAtLevel(int meshDimRelToMax, bool renum) const throw(INTERP_KERNEL::Exception)
+MEDCouplingMesh *MEDFileStructuredMesh::getGenMeshAtLevel(int meshDimRelToMax, bool renum) const
{
if(renum)
throw INTERP_KERNEL::Exception("MEDFileCurveLinearMesh does not support renumbering ! To do it perform request of renum array directly !");
* \return int - the number of entities.
* \throw If no mesh entities of dimension \a meshDimRelToMaxExt are available in \a this mesh.
*/
-int MEDFileStructuredMesh::getSizeAtLevel(int meshDimRelToMaxExt) const throw(INTERP_KERNEL::Exception)
+int MEDFileStructuredMesh::getSizeAtLevel(int meshDimRelToMaxExt) const
{
if(meshDimRelToMaxExt!=0 && meshDimRelToMaxExt!=1)
throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::getSizeAtLevel : Only available for levels 0 or 1 !");
return cmesh->getNumberOfNodes();
}
-int MEDFileStructuredMesh::getNumberOfNodes() const throw(INTERP_KERNEL::Exception)
+int MEDFileStructuredMesh::getNumberOfNodes() const
{
const MEDCouplingStructuredMesh *cmesh=getStructuredMesh();
if(!cmesh)
return cmesh->getNumberOfNodes();
}
-med_geometry_type MEDFileStructuredMesh::GetGeoTypeFromMeshDim(int meshDim) throw(INTERP_KERNEL::Exception)
+void MEDFileStructuredMesh::whichAreNodesFetched(const MEDFileField1TSStructItem& st, const MEDFileFieldGlobsReal *globs, std::vector<bool>& nodesFetched) const
+{
+ if(st.getNumberOfItems()!=1)
+ throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::whichAreNodesFetched : The sturture of field is not lying on single geo type ! it is not managed yet for structured mesh !");
+ if(st[0].getGeo()!=MEDCouplingStructuredMesh::GetGeoTypeGivenMeshDimension(getMeshDimension()))
+ throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::whichAreNodesFetched : The sturture of field is not lying on expected geo type !");
+ if(getNumberOfNodes()!=(int)nodesFetched.size())
+ throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::whichAreNodesFetched : invalid size of array !");
+ if(st[0].getPflName().empty())
+ {
+ std::fill(nodesFetched.begin(),nodesFetched.end(),true);
+ return ;
+ }
+ const DataArrayInt *arr(globs->getProfile(st[0].getPflName().c_str()));
+ const MEDCouplingStructuredMesh *cmesh=getStructuredMesh();//cmesh not null because getNumberOfNodes called before
+ int sz(nodesFetched.size());
+ for(const int *work=arr->begin();work!=arr->end();work++)
+ {
+ std::vector<int> conn;
+ cmesh->getNodeIdsOfCell(*work,conn);
+ for(std::vector<int>::const_iterator it=conn.begin();it!=conn.end();it++)
+ if(*it>=0 && *it<sz)
+ nodesFetched[*it]=true;
+ else
+ throw INTERP_KERNEL::Exception("MEDFileStructuredMesh::whichAreNodesFetched : internal error !");
+ }
+}
+
+med_geometry_type MEDFileStructuredMesh::GetGeoTypeFromMeshDim(int meshDim)
{
med_geometry_type geoTypeReq=MED_NONE;
switch(meshDim)
return geoTypeReq;
}
-void MEDFileStructuredMesh::loadStrMeshFromFile(MEDFileStrMeshL2 *strm, med_idt fid, const char *mName, int dt, int it) throw(INTERP_KERNEL::Exception)
+void MEDFileStructuredMesh::loadStrMeshFromFile(MEDFileStrMeshL2 *strm, med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs)
{
setName(strm->getName());
setDescription(strm->getDescription());
setOrder(strm->getOrder());
setTimeValue(strm->getTime());
setTimeUnit(strm->getTimeUnit());
- MEDFileMeshL2::ReadFamiliesAndGrps(fid,mName,_families,_groups);
+ MEDFileMeshL2::ReadFamiliesAndGrps(fid,mName,_families,_groups,mrs);
med_bool chgt=MED_FALSE,trsf=MED_FALSE;
int nbOfElt=MEDmeshnEntity(fid,mName,dt,it,MED_NODE,MED_NONE,MED_FAMILY_NUMBER,MED_NODAL,&chgt,&trsf);
if(nbOfElt>0)
{
- _fam_nodes=DataArrayInt::New();
- _fam_nodes->alloc(nbOfElt,1);
- MEDmeshEntityFamilyNumberRd(fid,mName,dt,it,MED_NODE,MED_NONE,_fam_nodes->getPointer());
+ if(!mrs || mrs->isNodeFamilyFieldReading())
+ {
+ _fam_nodes=DataArrayInt::New();
+ _fam_nodes->alloc(nbOfElt,1);
+ MEDmeshEntityFamilyNumberRd(fid,mName,dt,it,MED_NODE,MED_NONE,_fam_nodes->getPointer());
+ }
}
nbOfElt=MEDmeshnEntity(fid,mName,dt,it,MED_NODE,MED_NONE,MED_NUMBER,MED_NODAL,&chgt,&trsf);
if(nbOfElt>0)
{
- _num_nodes=DataArrayInt::New();
- _num_nodes->alloc(nbOfElt,1);
- MEDmeshEntityNumberRd(fid,mName,dt,it,MED_NODE,MED_NONE,_num_nodes->getPointer());
+ if(!mrs || mrs->isNodeNumFieldReading())
+ {
+ _num_nodes=DataArrayInt::New();
+ _num_nodes->alloc(nbOfElt,1);
+ MEDmeshEntityNumberRd(fid,mName,dt,it,MED_NODE,MED_NONE,_num_nodes->getPointer());
+ }
}
int meshDim=getStructuredMesh()->getMeshDimension();
med_geometry_type geoTypeReq=GetGeoTypeFromMeshDim(meshDim);
nbOfElt=MEDmeshnEntity(fid,mName,dt,it,MED_CELL,geoTypeReq,MED_FAMILY_NUMBER,MED_NODAL,&chgt,&trsf);
if(nbOfElt>0)
{
- _fam_cells=DataArrayInt::New();
- _fam_cells->alloc(nbOfElt,1);
- MEDmeshEntityFamilyNumberRd(fid,mName,dt,it,MED_CELL,geoTypeReq,_fam_cells->getPointer());
+ if(!mrs || mrs->isCellFamilyFieldReading())
+ {
+ _fam_cells=DataArrayInt::New();
+ _fam_cells->alloc(nbOfElt,1);
+ MEDmeshEntityFamilyNumberRd(fid,mName,dt,it,MED_CELL,geoTypeReq,_fam_cells->getPointer());
+ }
}
nbOfElt=MEDmeshnEntity(fid,mName,dt,it,MED_CELL,geoTypeReq,MED_NUMBER,MED_NODAL,&chgt,&trsf);
if(nbOfElt>0)
{
- _num_cells=DataArrayInt::New();
- _num_cells->alloc(nbOfElt,1);
- MEDmeshEntityNumberRd(fid,mName,dt,it,MED_CELL,geoTypeReq,_num_cells->getPointer());
+ if(!mrs || mrs->isCellNumFieldReading())
+ {
+ _num_cells=DataArrayInt::New();
+ _num_cells->alloc(nbOfElt,1);
+ MEDmeshEntityNumberRd(fid,mName,dt,it,MED_CELL,geoTypeReq,_num_cells->getPointer());
+ }
}
nbOfElt=MEDmeshnEntity(fid,mName,dt,it,MED_CELL,geoTypeReq,MED_NAME,MED_NODAL,&chgt,&trsf);
if(nbOfElt>0)
{
- _names_cells=DataArrayAsciiChar::New();
- _names_cells->alloc(nbOfElt+1,MED_SNAME_SIZE);//not a bug to avoid the memory corruption due to last \0 at the end
- MEDmeshEntityNameRd(fid,mName,dt,it,MED_CELL,geoTypeReq,_names_cells->getPointer());
- _names_cells->reAlloc(nbOfElt);//not a bug to avoid the memory corruption due to last \0 at the end
+ if(!mrs || mrs->isCellNameFieldReading())
+ {
+ _names_cells=DataArrayAsciiChar::New();
+ _names_cells->alloc(nbOfElt+1,MED_SNAME_SIZE);//not a bug to avoid the memory corruption due to last \0 at the end
+ MEDmeshEntityNameRd(fid,mName,dt,it,MED_CELL,geoTypeReq,_names_cells->getPointer());
+ _names_cells->reAlloc(nbOfElt);//not a bug to avoid the memory corruption due to last \0 at the end
+ }
}
nbOfElt=MEDmeshnEntity(fid,mName,dt,it,MED_NODE,MED_NONE,MED_NAME,MED_NODAL,&chgt,&trsf);
if(nbOfElt>0)
{
- _names_nodes=DataArrayAsciiChar::New();
- _names_nodes->alloc(nbOfElt+1,MED_SNAME_SIZE);//not a bug to avoid the memory corruption due to last \0 at the end
- MEDmeshEntityNameRd(fid,mName,dt,it,MED_NODE,MED_NONE,_names_nodes->getPointer());
- _names_nodes->reAlloc(nbOfElt);//not a bug to avoid the memory corruption due to last \0 at the end
+ if(!mrs || mrs->isNodeNameFieldReading())
+ {
+ _names_nodes=DataArrayAsciiChar::New();
+ _names_nodes->alloc(nbOfElt+1,MED_SNAME_SIZE);//not a bug to avoid the memory corruption due to last \0 at the end
+ MEDmeshEntityNameRd(fid,mName,dt,it,MED_NODE,MED_NONE,_names_nodes->getPointer());
+ _names_nodes->reAlloc(nbOfElt);//not a bug to avoid the memory corruption due to last \0 at the end
+ }
}
}
-void MEDFileStructuredMesh::writeStructuredLL(med_idt fid, const char *maa) const throw(INTERP_KERNEL::Exception)
+void MEDFileStructuredMesh::writeStructuredLL(med_idt fid, const char *maa) const
{
int meshDim=getStructuredMesh()->getMeshDimension();
med_geometry_type geoTypeReq=GetGeoTypeFromMeshDim(meshDim);
* \throw If there is no meshes in the file.
* \throw If the mesh in the file is not a Cartesian one.
*/
-MEDFileCMesh *MEDFileCMesh::New(const char *fileName, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+MEDFileCMesh *MEDFileCMesh::New(const char *fileName, MEDFileMeshReadSelector *mrs)
{
std::vector<std::string> ms=MEDLoader::GetMeshNames(fileName);
if(ms.empty())
* \throw If there is no mesh with given attributes in the file.
* \throw If the mesh in the file is not a Cartesian one.
*/
-MEDFileCMesh *MEDFileCMesh::New(const char *fileName, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+MEDFileCMesh *MEDFileCMesh::New(const char *fileName, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs)
{
MEDFileUtilities::CheckFileForRead(fileName);
MEDFileUtilities::AutoFid fid=MEDfileOpen(fileName,MED_ACC_RDONLY);
return new MEDFileCMesh(fid,mName,dt,it,mrs);
}
-std::size_t MEDFileCMesh::getHeapMemorySize() const
+std::size_t MEDFileCMesh::getHeapMemorySizeWithoutChildren() const
{
- std::size_t ret=MEDFileStructuredMesh::getHeapMemorySize();
+ return MEDFileStructuredMesh::getHeapMemorySizeWithoutChildren();
+}
+
+std::vector<const BigMemoryObject *> MEDFileCMesh::getDirectChildren() const
+{
+ std::vector<const BigMemoryObject *> ret(MEDFileStructuredMesh::getDirectChildren());
if((const MEDCouplingCMesh *)_cmesh)
- ret+=_cmesh->getHeapMemorySize();
+ ret.push_back((const MEDCouplingCMesh *)_cmesh);
return ret;
}
* \return int - the mesh dimension.
* \throw If there are no cells in this mesh.
*/
-int MEDFileCMesh::getMeshDimension() const throw(INTERP_KERNEL::Exception)
+int MEDFileCMesh::getMeshDimension() const
{
if(!((const MEDCouplingCMesh*)_cmesh))
throw INTERP_KERNEL::Exception("MEDFileCMesh::getMeshDimension : unable to get meshdimension because no mesh set !");
return simpleRepr();
}
-MEDFileMesh *MEDFileCMesh::shallowCpy() const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileCMesh::shallowCpy() const
{
MEDCouplingAutoRefCountObjectPtr<MEDFileCMesh> ret=new MEDFileCMesh(*this);
return ret.retn();
}
-MEDFileMesh *MEDFileCMesh::createNewEmpty() const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileCMesh::createNewEmpty() const
{
return new MEDFileCMesh;
}
-MEDFileMesh *MEDFileCMesh::deepCpy() const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileCMesh::deepCpy() const
{
MEDCouplingAutoRefCountObjectPtr<MEDFileCMesh> ret=new MEDFileCMesh(*this);
if((const MEDCouplingCMesh*)_cmesh)
{
}
-MEDFileCMesh::MEDFileCMesh(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+MEDFileCMesh::MEDFileCMesh(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs)
try
{
loadCMeshFromFile(fid,mName,dt,it,mrs);
throw e;
}
-void MEDFileCMesh::loadCMeshFromFile(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+void MEDFileCMesh::loadCMeshFromFile(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs)
{
ParaMEDMEM::MEDCouplingMeshType meshType;
int dummy0,dummy1;
MEDCouplingCMesh *mesh=loaderl2.getMesh();
mesh->incrRef();
_cmesh=mesh;
- loadStrMeshFromFile(&loaderl2,fid,mName,dt,it);
+ loadStrMeshFromFile(&loaderl2,fid,mName,dt,it,mrs);
}
/*!
* \throw If the name or the description of \a this mesh and \a m are not empty and are
* different.
*/
-void MEDFileCMesh::setMesh(MEDCouplingCMesh *m) throw(INTERP_KERNEL::Exception)
+void MEDFileCMesh::setMesh(MEDCouplingCMesh *m)
{
dealWithTinyInfo(m);
if(m)
_cmesh=m;
}
-void MEDFileCMesh::writeLL(med_idt fid) const throw(INTERP_KERNEL::Exception)
+void MEDFileCMesh::writeLL(med_idt fid) const
{
INTERP_KERNEL::AutoPtr<char> maa=MEDLoaderBase::buildEmptyString(MED_NAME_SIZE);
INTERP_KERNEL::AutoPtr<char> desc=MEDLoaderBase::buildEmptyString(MED_COMMENT_SIZE);
return new MEDFileCurveLinearMesh;
}
-MEDFileCurveLinearMesh *MEDFileCurveLinearMesh::New(const char *fileName, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+MEDFileCurveLinearMesh *MEDFileCurveLinearMesh::New(const char *fileName, MEDFileMeshReadSelector *mrs)
{
std::vector<std::string> ms=MEDLoader::GetMeshNames(fileName);
if(ms.empty())
return new MEDFileCurveLinearMesh(fid,ms.front().c_str(),dt,it,mrs);
}
-MEDFileCurveLinearMesh *MEDFileCurveLinearMesh::New(const char *fileName, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+MEDFileCurveLinearMesh *MEDFileCurveLinearMesh::New(const char *fileName, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs)
{
MEDFileUtilities::CheckFileForRead(fileName);
MEDFileUtilities::AutoFid fid=MEDfileOpen(fileName,MED_ACC_RDONLY);
return new MEDFileCurveLinearMesh(fid,mName,dt,it,mrs);
}
-std::size_t MEDFileCurveLinearMesh::getHeapMemorySize() const
+std::size_t MEDFileCurveLinearMesh::getHeapMemorySizeWithoutChildren() const
+{
+ return MEDFileStructuredMesh::getHeapMemorySizeWithoutChildren();
+}
+
+std::vector<const BigMemoryObject *> MEDFileCurveLinearMesh::getDirectChildren() const
{
- std::size_t ret=MEDFileStructuredMesh::getHeapMemorySize();
+ std::vector<const BigMemoryObject *> ret(MEDFileStructuredMesh::getDirectChildren());
if((const MEDCouplingCurveLinearMesh *)_clmesh)
- ret+=_clmesh->getHeapMemorySize();
+ ret.push_back((const MEDCouplingCurveLinearMesh *)_clmesh);
return ret;
}
-MEDFileMesh *MEDFileCurveLinearMesh::shallowCpy() const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileCurveLinearMesh::shallowCpy() const
{
MEDCouplingAutoRefCountObjectPtr<MEDFileCurveLinearMesh> ret=new MEDFileCurveLinearMesh(*this);
return ret.retn();
}
-MEDFileMesh *MEDFileCurveLinearMesh::createNewEmpty() const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileCurveLinearMesh::createNewEmpty() const
{
return new MEDFileCurveLinearMesh;
}
-MEDFileMesh *MEDFileCurveLinearMesh::deepCpy() const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileCurveLinearMesh::deepCpy() const
{
MEDCouplingAutoRefCountObjectPtr<MEDFileCurveLinearMesh> ret=new MEDFileCurveLinearMesh(*this);
if((const MEDCouplingCurveLinearMesh*)_clmesh)
return ret.retn();
}
-int MEDFileCurveLinearMesh::getMeshDimension() const throw(INTERP_KERNEL::Exception)
+int MEDFileCurveLinearMesh::getMeshDimension() const
{
if(!((const MEDCouplingCurveLinearMesh*)_clmesh))
throw INTERP_KERNEL::Exception("MEDFileCurveLinearMesh::getMeshDimension : unable to get meshdimension because no mesh set !");
return _clmesh;
}
-void MEDFileCurveLinearMesh::setMesh(MEDCouplingCurveLinearMesh *m) throw(INTERP_KERNEL::Exception)
+void MEDFileCurveLinearMesh::setMesh(MEDCouplingCurveLinearMesh *m)
{
dealWithTinyInfo(m);
if(m)
{
}
-MEDFileCurveLinearMesh::MEDFileCurveLinearMesh(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+MEDFileCurveLinearMesh::MEDFileCurveLinearMesh(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs)
try
{
loadCLMeshFromFile(fid,mName,dt,it,mrs);
throw e;
}
-void MEDFileCurveLinearMesh::writeLL(med_idt fid) const throw(INTERP_KERNEL::Exception)
+void MEDFileCurveLinearMesh::writeLL(med_idt fid) const
{
INTERP_KERNEL::AutoPtr<char> maa=MEDLoaderBase::buildEmptyString(MED_NAME_SIZE);
INTERP_KERNEL::AutoPtr<char> desc=MEDLoaderBase::buildEmptyString(MED_COMMENT_SIZE);
MEDFileStructuredMesh::writeStructuredLL(fid,maa);
}
-void MEDFileCurveLinearMesh::loadCLMeshFromFile(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs) throw(INTERP_KERNEL::Exception)
+void MEDFileCurveLinearMesh::loadCLMeshFromFile(med_idt fid, const char *mName, int dt, int it, MEDFileMeshReadSelector *mrs)
{
ParaMEDMEM::MEDCouplingMeshType meshType;
int dummy0,dummy1;
MEDCouplingCurveLinearMesh *mesh=loaderl2.getMesh();
mesh->incrRef();
_clmesh=mesh;
- loadStrMeshFromFile(&loaderl2,fid,mName,dt,it);
+ loadStrMeshFromFile(&loaderl2,fid,mName,dt,it,mrs);
}
MEDFileMeshMultiTS *MEDFileMeshMultiTS::New()
return new MEDFileMeshMultiTS;
}
-MEDFileMeshMultiTS *MEDFileMeshMultiTS::New(const char *fileName) throw(INTERP_KERNEL::Exception)
+MEDFileMeshMultiTS *MEDFileMeshMultiTS::New(const char *fileName)
{
return new MEDFileMeshMultiTS(fileName);
}
-MEDFileMeshMultiTS *MEDFileMeshMultiTS::New(const char *fileName, const char *mName) throw(INTERP_KERNEL::Exception)
+MEDFileMeshMultiTS *MEDFileMeshMultiTS::New(const char *fileName, const char *mName)
{
return new MEDFileMeshMultiTS(fileName,mName);
}
-MEDFileMeshMultiTS *MEDFileMeshMultiTS::deepCpy() const throw(INTERP_KERNEL::Exception)
+MEDFileMeshMultiTS *MEDFileMeshMultiTS::deepCpy() const
{
MEDCouplingAutoRefCountObjectPtr<MEDFileMeshMultiTS> ret=MEDFileMeshMultiTS::New();
std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileMesh> > meshOneTs(_mesh_one_ts.size());
return ret.retn();
}
-std::size_t MEDFileMeshMultiTS::getHeapMemorySize() const
+std::size_t MEDFileMeshMultiTS::getHeapMemorySizeWithoutChildren() const
+{
+ return _mesh_one_ts.capacity()*sizeof(MEDCouplingAutoRefCountObjectPtr<MEDFileMesh>);
+}
+
+std::vector<const BigMemoryObject *> MEDFileMeshMultiTS::getDirectChildren() const
{
- std::size_t ret=_mesh_one_ts.capacity()*sizeof(MEDCouplingAutoRefCountObjectPtr<MEDFileMesh>);
+ std::vector<const BigMemoryObject *> ret;
for(std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileMesh> >::const_iterator it=_mesh_one_ts.begin();it!=_mesh_one_ts.end();it++)
- ret+=(*it)->getHeapMemorySize();
+ {
+ const MEDFileMesh *cur(*it);
+ if(cur)
+ ret.push_back(cur);
+ }
return ret;
}
-const char *MEDFileMeshMultiTS::getName() const throw(INTERP_KERNEL::Exception)
+std::string MEDFileMeshMultiTS::getName() const
{
if(_mesh_one_ts.empty())
throw INTERP_KERNEL::Exception("MEDFileMeshMultiTS::getName : no time steps set !");
return _mesh_one_ts[0]->getName();
}
-void MEDFileMeshMultiTS::setName(const char *newMeshName) throw(INTERP_KERNEL::Exception)
+void MEDFileMeshMultiTS::setName(const char *newMeshName)
{
std::string oldName(getName());
std::vector< std::pair<std::string,std::string> > v(1);
changeNames(v);
}
-bool MEDFileMeshMultiTS::changeNames(const std::vector< std::pair<std::string,std::string> >& modifTab) throw(INTERP_KERNEL::Exception)
+bool MEDFileMeshMultiTS::changeNames(const std::vector< std::pair<std::string,std::string> >& modifTab)
{
bool ret=false;
for(std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileMesh> >::iterator it=_mesh_one_ts.begin();it!=_mesh_one_ts.end();it++)
return ret;
}
-MEDFileMesh *MEDFileMeshMultiTS::getOneTimeStep() const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileMeshMultiTS::getOneTimeStep() const
{
if(_mesh_one_ts.empty())
throw INTERP_KERNEL::Exception("MEDFileMeshMultiTS::getOneTimeStep : empty time step set !");
return const_cast<MEDFileMesh *>(static_cast<const MEDFileMesh *>(_mesh_one_ts[0]));
}
-void MEDFileMeshMultiTS::setOneTimeStep(MEDFileMesh *mesh1TimeStep) throw(INTERP_KERNEL::Exception)
+void MEDFileMeshMultiTS::setOneTimeStep(MEDFileMesh *mesh1TimeStep)
{
if(!mesh1TimeStep)
throw INTERP_KERNEL::Exception("MEDFileMeshMultiTS::setOneTimeStep : input pointer should be different from 0 !");
_mesh_one_ts[0]=mesh1TimeStep;
}
-void MEDFileMeshMultiTS::write(med_idt fid) const throw(INTERP_KERNEL::Exception)
+void MEDFileMeshMultiTS::write(med_idt fid) const
{
for(std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileMesh> >::const_iterator it=_mesh_one_ts.begin();it!=_mesh_one_ts.end();it++)
{
}
}
-void MEDFileMeshMultiTS::write(const char *fileName, int mode) const throw(INTERP_KERNEL::Exception)
+void MEDFileMeshMultiTS::write(const char *fileName, int mode) const
{
med_access_mode medmod=MEDFileUtilities::TraduceWriteMode(mode);
MEDFileUtilities::AutoFid fid=MEDfileOpen(fileName,medmod);
write(fid);
}
-void MEDFileMeshMultiTS::loadFromFile(const char *fileName, const char *mName) throw(INTERP_KERNEL::Exception)
+void MEDFileMeshMultiTS::loadFromFile(const char *fileName, const char *mName)
{//for the moment to be improved
_mesh_one_ts.resize(1);
_mesh_one_ts[0]=MEDFileMesh::New(fileName,mName,-1,-1);
{
}
-MEDFileMeshMultiTS::MEDFileMeshMultiTS(const char *fileName) throw(INTERP_KERNEL::Exception)
+MEDFileMeshMultiTS::MEDFileMeshMultiTS(const char *fileName)
try
{
std::vector<std::string> ms=MEDLoader::GetMeshNames(fileName);
throw e;
}
-MEDFileMeshMultiTS::MEDFileMeshMultiTS(const char *fileName, const char *mName) throw(INTERP_KERNEL::Exception)
+MEDFileMeshMultiTS::MEDFileMeshMultiTS(const char *fileName, const char *mName)
try
{
loadFromFile(fileName,mName);
return new MEDFileMeshes;
}
-MEDFileMeshes *MEDFileMeshes::New(const char *fileName) throw(INTERP_KERNEL::Exception)
+MEDFileMeshes *MEDFileMeshes::New(const char *fileName)
{
return new MEDFileMeshes(fileName);
}
-void MEDFileMeshes::write(med_idt fid) const throw(INTERP_KERNEL::Exception)
+void MEDFileMeshes::write(med_idt fid) const
{
checkCoherency();
for(std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileMeshMultiTS> >::const_iterator it=_meshes.begin();it!=_meshes.end();it++)
}
}
-void MEDFileMeshes::write(const char *fileName, int mode) const throw(INTERP_KERNEL::Exception)
+void MEDFileMeshes::write(const char *fileName, int mode) const
{
med_access_mode medmod=MEDFileUtilities::TraduceWriteMode(mode);
MEDFileUtilities::AutoFid fid=MEDfileOpen(fileName,medmod);
write(fid);
}
-int MEDFileMeshes::getNumberOfMeshes() const throw(INTERP_KERNEL::Exception)
+int MEDFileMeshes::getNumberOfMeshes() const
{
return _meshes.size();
}
-MEDFileMeshesIterator *MEDFileMeshes::iterator() throw(INTERP_KERNEL::Exception)
+MEDFileMeshesIterator *MEDFileMeshes::iterator()
{
return new MEDFileMeshesIterator(this);
}
-MEDFileMesh *MEDFileMeshes::getMeshAtPos(int i) const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileMeshes::getMeshAtPos(int i) const
{
if(i<0 || i>=(int)_meshes.size())
{
return _meshes[i]->getOneTimeStep();
}
-MEDFileMesh *MEDFileMeshes::getMeshWithName(const char *mname) const throw(INTERP_KERNEL::Exception)
+MEDFileMesh *MEDFileMeshes::getMeshWithName(const char *mname) const
{
std::vector<std::string> ms=getMeshesNames();
std::vector<std::string>::iterator it=std::find(ms.begin(),ms.end(),mname);
return getMeshAtPos((int)std::distance(ms.begin(),it));
}
-std::vector<std::string> MEDFileMeshes::getMeshesNames() const throw(INTERP_KERNEL::Exception)
+std::vector<std::string> MEDFileMeshes::getMeshesNames() const
{
std::vector<std::string> ret(_meshes.size());
int i=0;
return ret;
}
-bool MEDFileMeshes::changeNames(const std::vector< std::pair<std::string,std::string> >& modifTab) throw(INTERP_KERNEL::Exception)
+bool MEDFileMeshes::changeNames(const std::vector< std::pair<std::string,std::string> >& modifTab)
{
bool ret=false;
for(std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileMeshMultiTS> >::iterator it=_meshes.begin();it!=_meshes.end();it++)
return ret;
}
-void MEDFileMeshes::resize(int newSize) throw(INTERP_KERNEL::Exception)
+void MEDFileMeshes::resize(int newSize)
{
_meshes.resize(newSize);
}
-void MEDFileMeshes::pushMesh(MEDFileMesh *mesh) throw(INTERP_KERNEL::Exception)
+void MEDFileMeshes::pushMesh(MEDFileMesh *mesh)
{
if(!mesh)
throw INTERP_KERNEL::Exception("MEDFileMeshes::pushMesh : invalid input pointer ! should be different from 0 !");
_meshes.push_back(elt);
}
-void MEDFileMeshes::setMeshAtPos(int i, MEDFileMesh *mesh) throw(INTERP_KERNEL::Exception)
+void MEDFileMeshes::setMeshAtPos(int i, MEDFileMesh *mesh)
{
if(!mesh)
throw INTERP_KERNEL::Exception("MEDFileMeshes::setMeshAtPos : invalid input pointer ! should be different from 0 !");
_meshes[i]=elt;
}
-void MEDFileMeshes::destroyMeshAtPos(int i) throw(INTERP_KERNEL::Exception)
+void MEDFileMeshes::destroyMeshAtPos(int i)
{
if(i<0 || i>=(int)_meshes.size())
{
_meshes.erase(_meshes.begin()+i);
}
-void MEDFileMeshes::loadFromFile(const char *fileName) throw(INTERP_KERNEL::Exception)
+void MEDFileMeshes::loadFromFile(const char *fileName)
{
std::vector<std::string> ms=MEDLoader::GetMeshNames(fileName);
int i=0;
{
}
-MEDFileMeshes::MEDFileMeshes(const char *fileName) throw(INTERP_KERNEL::Exception)
+MEDFileMeshes::MEDFileMeshes(const char *fileName)
try
{
loadFromFile(fileName);
}
-catch(INTERP_KERNEL::Exception& e)
+catch(INTERP_KERNEL::Exception& /*e*/)
{
}
-MEDFileMeshes *MEDFileMeshes::deepCpy() const throw(INTERP_KERNEL::Exception)
+MEDFileMeshes *MEDFileMeshes::deepCpy() const
{
std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileMeshMultiTS> > meshes(_meshes.size());
std::size_t i=0;
return ret.retn();
}
-std::size_t MEDFileMeshes::getHeapMemorySize() const
+std::size_t MEDFileMeshes::getHeapMemorySizeWithoutChildren() const
{
- std::size_t ret=_meshes.capacity()*(sizeof(MEDCouplingAutoRefCountObjectPtr<MEDFileMeshMultiTS>));
+ return _meshes.capacity()*(sizeof(MEDCouplingAutoRefCountObjectPtr<MEDFileMeshMultiTS>));
+}
+
+std::vector<const BigMemoryObject *> MEDFileMeshes::getDirectChildren() const
+{
+ std::vector<const BigMemoryObject *> ret;
for(std::vector< MEDCouplingAutoRefCountObjectPtr<MEDFileMeshMultiTS> >::const_iterator it=_meshes.begin();it!=_meshes.end();it++)
- if((const MEDFileMeshMultiTS*)*it)
- ret+=(*it)->getHeapMemorySize();
- return ret;
+ {
+ const MEDFileMeshMultiTS *cur(*it);
+ if(cur)
+ ret.push_back(cur);
+ }
+ return ret;
}
std::string MEDFileMeshes::simpleRepr() const
oss << " - #" << i << " \"" << mns[i] << "\"\n";
}
-void MEDFileMeshes::checkCoherency() const throw(INTERP_KERNEL::Exception)
+void MEDFileMeshes::checkCoherency() const
{
static const char MSG[]="MEDFileMeshes::checkCoherency : mesh at rank ";
int i=0;
