}
/**
- * Construct a mapping between set of Nodes and the standart MEDCoupling connectivity format (c, cI).
+ * Construct a mapping between set of Nodes and the standard MEDCoupling connectivity format (c, cI).
*/
void MEDCouplingUMeshBuildQPFromMesh3(const double *coo1, int offset1, const double *coo2, int offset2, const std::vector<double>& addCoo,
const int *desc1Bg, const int *desc1End, const std::vector<std::vector<int> >& intesctEdges1,
// This initializes posBaseElt.
if(nbOfTurn==0)
{
- for(unsigned i=1;i<nbs && nbOfHit<maxNbOfHit;i++) // 2nd condition is to avoid ending with a cell wih one single edge
+ for(unsigned i=1;i<nbs && nbOfHit<maxNbOfHit;i++) // 2nd condition is to avoid ending with a cell with one single edge
{
cm.fillSonCellNodalConnectivity2(nbs-i,connBg+1,sz,tmpConn,typeOfSon);
INTERP_KERNEL::Edge *eCand(MEDCouplingUMeshBuildQPFromEdge2(typeOfSon,tmpConn,coords,m));
}
// Now move forward:
const unsigned fwdStart = (nbOfTurn == 0 ? 0 : posBaseElt); // the first element to be inspected going forward
- for(unsigned j=fwdStart+1;j<nbs && nbOfHit<maxNbOfHit;j++) // 2nd condition is to avoid ending with a cell wih one single edge
+ for(unsigned j=fwdStart+1;j<nbs && nbOfHit<maxNbOfHit;j++) // 2nd condition is to avoid ending with a cell with one single edge
{
cm.fillSonCellNodalConnectivity2((int)j,connBg+1,sz,tmpConn,typeOfSon); // get edge #j's connectivity
INTERP_KERNEL::Edge *eCand(MEDCouplingUMeshBuildQPFromEdge2(typeOfSon,tmpConn,coords,m));
break;
}
//push [posBaseElt,posEndElt) in newConnOfCell using e
- // The if clauses below are (volontary) not mutually exclusive: on a quad cell with 2 edges, the end of the connectivity is also its begining!
+ // The if clauses below are (voluntary) not mutually exclusive: on a quad cell with 2 edges, the end of the connectivity is also its beginning!
if(nbOfTurn==0)
- // at the begining of the connectivity (insert type)
+ // at the beginning of the connectivity (insert type)
EnterTheResultOf2DCellFirst(e,posBaseElt,posEndElt,(int)nbs,cm.isQuadratic(),coords,connBg+1,offset,newConnOfCell,appendedCoords,middles);
else if((nbOfHit+nbOfTurn) != (nbs-1))
// in the middle
* (Only present for its coords in case of 'subDiv' shares some nodes of 'm1')
* \param m2 is expected to be a mesh of meshDimension equal to 1 and spaceDim equal to 2. No check of that is performed by this method.
* \param addCoo input parameter with additional nodes linked to intersection of the 2 meshes.
- * \param[out] intersectEdge the same content as subDiv, but correclty oriented.
+ * \param[out] intersectEdge the same content as subDiv, but correctly oriented.
*/
void MEDCouplingUMesh::BuildIntersectEdges(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2,
const std::vector<double>& addCoo,
std::vector< std::vector<int> >& intersectEdge1, std::vector< std::vector<int> >& colinear2, std::vector< std::vector<int> >& subDiv2, std::vector<double>& addCoo, std::map<int,int>& mergedNodes)
{
static const int SPACEDIM=2;
- INTERP_KERNEL::QUADRATIC_PLANAR::_precision=eps;
- INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=eps;
+ INTERP_KERNEL::QuadraticPlanarPrecision prec(eps);
+ INTERP_KERNEL::QuadraticPlanarArcDetectionPrecision arcPrec(eps);
const int *c1(m1Desc->getNodalConnectivity()->begin()),*ci1(m1Desc->getNodalConnectivityIndex()->begin());
// Build BB tree of all edges in the tool mesh (second mesh)
- MCAuto<DataArrayDouble> bbox1Arr(m1Desc->getBoundingBoxForBBTree()),bbox2Arr(m2Desc->getBoundingBoxForBBTree());
+ MCAuto<DataArrayDouble> bbox1Arr(m1Desc->getBoundingBoxForBBTree(eps)),bbox2Arr(m2Desc->getBoundingBoxForBBTree(eps));
const double *bbox1(bbox1Arr->begin()),*bbox2(bbox2Arr->begin());
int nDescCell1(m1Desc->getNumberOfCells()),nDescCell2(m2Desc->getNumberOfCells());
intersectEdge1.resize(nDescCell1);
for(std::size_t iii=0;iii<szz;iii++,itt++)
{ (*itt)->incrRef(); nodesSafe[iii]=*itt; }
// end of protection
- // Performs egde cutting:
+ // Performs edge cutting:
pol1->splitAbs(*pol2,map1,map2,offset1,offset2,candidates2,intersectEdge1[i],i,colinear2,subDiv2,addCoo,mergedNodes);
delete pol2;
delete pol1;
* (newly created) nodes corresponding to the edge intersections.
* Output params:
* @param[out] cr, crI connectivity of the resulting mesh
- * @param[out] cNb1, cNb2 correspondance arrays giving for the merged mesh the initial cells IDs in m1 / m2
+ * @param[out] cNb1, cNb2 correspondence arrays giving for the merged mesh the initial cells IDs in m1 / m2
* TODO: describe input parameters
*/
void MEDCouplingUMesh::BuildIntersecting2DCellsFromEdges(double eps, const MEDCouplingUMesh *m1, const int *desc1, const int *descIndx1,
const int *conn2(m2->getNodalConnectivity()->begin()),*connI2(m2->getNodalConnectivityIndex()->begin());
int offset2(offset1+m2->getNumberOfNodes());
int offset3(offset2+((int)addCoords.size())/2);
- MCAuto<DataArrayDouble> bbox1Arr(m1->getBoundingBoxForBBTree()),bbox2Arr(m2->getBoundingBoxForBBTree());
+ MCAuto<DataArrayDouble> bbox1Arr(m1->getBoundingBoxForBBTree(eps)),bbox2Arr(m2->getBoundingBoxForBBTree(eps));
const double *bbox1(bbox1Arr->begin()),*bbox2(bbox2Arr->begin());
// Here a BBTree on 2D-cells, not on segments:
BBTree<SPACEDIM,int> myTree(bbox2,0,0,m2->getNumberOfCells(),eps);
}
/*!
- * It is the linear part of MEDCouplingUMesh::split2DCells. Here no additionnal nodes will be added in \b this. So coordinates pointer remain unchanged (is not even touch).
+ * It is the linear part of MEDCouplingUMesh::split2DCells. Here no additional nodes will be added in \b this. So coordinates pointer remain unchanged (is not even touch).
*
* \sa MEDCouplingUMesh::split2DCells
*/
/*!
- * It is the quadratic part of MEDCouplingUMesh::split2DCells. Here some additionnal nodes can be added at the end of coordinates array object.
+ * It is the quadratic part of MEDCouplingUMesh::split2DCells. Here some additional nodes can be added at the end of coordinates array object.
*
* \return int - the number of new nodes created.
* \sa MEDCouplingUMesh::split2DCells
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::Intersect2DMeshes : input meshes must be not NULL !");
m1->checkFullyDefined();
m2->checkFullyDefined();
+ INTERP_KERNEL::QuadraticPlanarPrecision prec(eps);
+ INTERP_KERNEL::QuadraticPlanarArcDetectionPrecision arcPrec(eps);
if(m1->getMeshDimension()!=2 || m1->getSpaceDimension()!=2 || m2->getMeshDimension()!=2 || m2->getSpaceDimension()!=2)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::Intersect2DMeshes works on umeshes m1 AND m2 with meshdim equal to 2 and spaceDim equal to 2 too!");
/*!
* Partitions the first given 2D mesh using the second given 1D mesh as a tool.
* Thus the final result contains the aggregation of nodes of \a mesh2D, then nodes of \a mesh1D, then new nodes that are the result of the intersection
- * and finaly, in case of quadratic polygon the centers of edges new nodes.
+ * and finally, in case of quadratic polygon the centers of edges new nodes.
* The meshes should be in 2D space. In addition, returns two arrays mapping cells of the resulting mesh to cells of the input.
*
* \param [in] mesh2D - the 2D mesh (spacedim=meshdim=2) to be intersected using \a mesh1D tool. The mesh must be so that each point in the space covered by \a mesh2D
// Step 1: compute all edge intersections (new nodes)
std::vector< std::vector<int> > intersectEdge1, colinear2, subDiv2;
std::vector<double> addCoo,addCoordsQuadratic; // coordinates of newly created nodes
- INTERP_KERNEL::QUADRATIC_PLANAR::_precision=eps;
- INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=eps;
+ INTERP_KERNEL::QuadraticPlanarPrecision prec(eps);
+ INTERP_KERNEL::QuadraticPlanarArcDetectionPrecision arcPrec(eps);
//
// Build desc connectivity
DataArrayInt *desc1(DataArrayInt::New()),*descIndx1(DataArrayInt::New()),*revDesc1(DataArrayInt::New()),*revDescIndx1(DataArrayInt::New());
MCAuto<DataArrayDouble> baryRet1(ret1NonCol->computeCellCenterOfMass());
MCAuto<DataArrayInt> elts,eltsIndex;
mesh2D->getCellsContainingPoints(baryRet1->begin(),baryRet1->getNumberOfTuples(),eps,elts,eltsIndex);
- MCAuto<DataArrayInt> eltsIndex2(eltsIndex->deltaShiftIndex());
+ MCAuto<DataArrayInt> eltsIndex2(DataArrayInt::New()); eltsIndex2->alloc(0,1);
+ if (eltsIndex->getNumberOfTuples() > 1)
+ eltsIndex2 = eltsIndex->deltaShiftIndex();
MCAuto<DataArrayInt> eltsIndex3(eltsIndex2->findIdsEqual(1));
if(eltsIndex2->count(0)+eltsIndex3->getNumberOfTuples()!=ret1NonCol->getNumberOfCells())
throw INTERP_KERNEL::Exception("Intersect2DMeshWith1DLine : internal error 1 !");
* \b WARNING this method lead to have a non geometric type sorted mesh (for MED file users) !
* This method performs a conformization of \b this. So if a edge in \a this can be split into entire edges in \a this this method
* will suppress such edges to use sub edges in \a this. So this method does not add nodes in \a this if merged edges are both linear (INTERP_KERNEL::NORM_SEG2).
- * In the other cases new nodes can be created. If any are created, they will be appended at the end of the coordinates object before the invokation of this method.
+ * In the other cases new nodes can be created. If any are created, they will be appended at the end of the coordinates object before the invocation of this method.
*
* Whatever the returned value, this method does not alter the order of cells in \a this neither the orientation of cells.
* The modified cells, if any, are systematically declared as NORM_POLYGON or NORM_QPOLYG depending on the initial quadraticness of geometric type.
MCAuto<DataArrayInt> desc1(DataArrayInt::New()),descIndx1(DataArrayInt::New()),revDesc1(DataArrayInt::New()),revDescIndx1(DataArrayInt::New());
MCAuto<MEDCouplingUMesh> mDesc(buildDescendingConnectivity(desc1,descIndx1,revDesc1,revDescIndx1));
const int *c(mDesc->getNodalConnectivity()->begin()),*ci(mDesc->getNodalConnectivityIndex()->begin()),*rd(revDesc1->begin()),*rdi(revDescIndx1->begin());
- MCAuto<DataArrayDouble> bboxArr(mDesc->getBoundingBoxForBBTree());
+ MCAuto<DataArrayDouble> bboxArr(mDesc->getBoundingBoxForBBTree(eps));
const double *bbox(bboxArr->begin()),*coords(getCoords()->begin());
int nCell(getNumberOfCells()),nDescCell(mDesc->getNumberOfCells());
std::vector< std::vector<int> > intersectEdge(nDescCell),overlapEdge(nDescCell);
std::vector<double> addCoo;
BBTree<SPACEDIM,int> myTree(bbox,0,0,nDescCell,-eps);
- INTERP_KERNEL::QUADRATIC_PLANAR::_precision=eps;
- INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=eps;
+ INTERP_KERNEL::QuadraticPlanarPrecision prec(eps);
+ INTERP_KERNEL::QuadraticPlanarArcDetectionPrecision arcPrec(eps);
for(int i=0;i<nDescCell;i++)
{
std::vector<int> candidates;
* If yes, the cell is "repaired" to minimize at most its number of edges. So this method do not change the overall shape of cells in \a this (with eps precision).
* This method do not take care of shared edges between cells, so this method can lead to a non conform mesh (\a this). If a conform mesh is required you're expected
* to invoke MEDCouplingUMesh::mergeNodes and MEDCouplingUMesh::conformize2D right after this call.
- * This method works on any 2D geometric types of cell (even static one). If a cell is touched its type becomes dynamic automaticaly. For 2D "repaired" quadratic cells
+ * This method works on any 2D geometric types of cell (even static one). If a cell is touched its type becomes dynamic automatically. For 2D "repaired" quadratic cells
* new nodes for center of merged edges is are systematically created and appended at the end of the previously existing nodes.
*
* If the returned array is empty it means that nothing has changed in \a this (as if it were a const method). If the array is not empty the connectivity of \a this is modified
checkConsistencyLight();
if(getSpaceDimension()!=2 || getMeshDimension()!=2)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::colinearize2D : This method only works for meshes with spaceDim=2 and meshDim=2 !");
- INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=eps;
- INTERP_KERNEL::QUADRATIC_PLANAR::_precision=eps;
+ INTERP_KERNEL::QuadraticPlanarPrecision prec(eps);
+ INTERP_KERNEL::QuadraticPlanarArcDetectionPrecision arcPrec(eps);
int nbOfCells(getNumberOfCells()),nbOfNodes(getNumberOfNodes());
const int *cptr(_nodal_connec->begin()),*ciptr(_nodal_connec_index->begin());
MCAuto<DataArrayInt> newc(DataArrayInt::New()),newci(DataArrayInt::New()); newci->alloc(nbOfCells+1,1); newc->alloc(0,1); newci->setIJ(0,0,0);
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::ReplaceEdgeInFace: internal error, should never happen!");
int d = distance(startPos, endPos);
if (d == 1 || d == (1-dst)) // don't use modulo, for neg numbers, result is implementation defined ...
- modifiedFace.insert(++startPos, ++insidePoints.begin(), --insidePoints.end()); // insidePoints also contains start and end node. Those dont need to be inserted.
+ modifiedFace.insert(++startPos, ++insidePoints.begin(), --insidePoints.end()); // insidePoints also contains start and end node. Those don't need to be inserted.
else
modifiedFace.insert(++endPos, ++insidePoints.rbegin(), --insidePoints.rend());
}
MCAuto<MEDCouplingSkyLineArray> connSlaDesc(MEDCouplingSkyLineArray::New(mDesc->getNodalConnectivityIndex(), mDesc->getNodalConnectivity()));
// Build BBTree
- MCAuto<DataArrayDouble> bboxArr(mDesc->getBoundingBoxForBBTree());
+ MCAuto<DataArrayDouble> bboxArr(mDesc->getBoundingBoxForBBTree(eps));
const double *bbox(bboxArr->begin()); getCoords()->begin();
int nDescCell(mDesc->getNumberOfCells());
BBTree<SPACEDIM,int> myTree(bbox,0,0,nDescCell,-eps);
fill(hit.begin(), hit.end(), false);
vector<int> hitPoly; // the final result: which 3D cells have been modified.
- for( vector<pair<double,int>>::const_iterator it = S.begin(); it != S.end(); it++)
+ for( vector<pair<double,int> >::const_iterator it = S.begin(); it != S.end(); it++)
{
int faceIdx = (*it).second;
if (hit[faceIdx]) continue;
{
if (packsIds[jj] == -1)
// The below should never happen - if a face is used several times, with a different layout of the nodes
- // it means that is is already conform, so it is *not* hit by the algorithm. The algorithm only hits
+ // it means that it is already conform, so it is *not* hit by the algorithm. The algorithm only hits
// faces which are actually used only once, by a single cell. This is different for edges below.
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::conformize3D: Could not find face in connectivity! Internal error.");
else
// mDesc2->writeVTK("/tmp/toto_desc2_confInter.vtu");
const int *revDescIP2(revDescI2->getConstPointer()), *revDescP2(revDesc2->getConstPointer());
const int *cDesc2(mDesc2->getNodalConnectivity()->begin()),*cIDesc2(mDesc2->getNodalConnectivityIndex()->begin());
- MCAuto<DataArrayDouble> bboxArr(mDesc2->getBoundingBoxForBBTree());
+ MCAuto<DataArrayDouble> bboxArr(mDesc2->getBoundingBoxForBBTree(eps));
const double *bbox2(bboxArr->begin());
int nDesc2Cell=mDesc2->getNumberOfCells();
BBTree<SPACEDIM,int> myTree2(bbox2,0,0,nDesc2Cell,-eps);
DataArrayDouble * lens = lenF->getArray();
// Sort edges by decreasing length:
- vector<pair<double,int>> S;
+ vector<pair<double,int> > S;
for(std::size_t i=0;i < lens->getNumberOfTuples();i++)
{
pair<double,int> p = make_pair(lens->getIJ(i, 0), i);
vector<bool> hit(nDesc2Cell);
fill(hit.begin(), hit.end(), false);
- for( vector<pair<double,int>>::const_iterator it = S.begin(); it != S.end(); it++)
+ for( vector<pair<double,int> >::const_iterator it = S.begin(); it != S.end(); it++)
{
int eIdx = (*it).second;
if (hit[eIdx])
mPartCand->getNodalConnectivity()->begin(), mPartCand->getNodalConnectivityIndex()->begin(),
idsGoodLine->begin(), idsGoodLine->end(),
/*out*/insidePoints, hitSegs);
- // Optim: smaller segments completly included in eIdx and not split won't need any further treatment:
+ // Optim: smaller segments completely included in eIdx and not split won't need any further treatment:
for (vector<int>::const_iterator its=hitSegs.begin(); its != hitSegs.end(); ++its)
hit[cands2[*its]] = true;