-// Copyright (C) 2007-2014 CEA/DEN, EDF R&D
+// Copyright (C) 2007-2015 CEA/DEN, EDF R&D
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
return ret;
}
-std::vector<const BigMemoryObject *> MEDCouplingUMesh::getDirectChildren() const
+std::vector<const BigMemoryObject *> MEDCouplingUMesh::getDirectChildrenWithNull() const
{
- std::vector<const BigMemoryObject *> ret(MEDCouplingPointSet::getDirectChildren());
- if(_nodal_connec)
- ret.push_back(_nodal_connec);
- if(_nodal_connec_index)
- ret.push_back(_nodal_connec_index);
+ std::vector<const BigMemoryObject *> ret(MEDCouplingPointSet::getDirectChildrenWithNull());
+ ret.push_back(_nodal_connec);
+ ret.push_back(_nodal_connec_index);
return ret;
}
void MEDCouplingUMesh::checkCoherency() const
{
if(_mesh_dim<-1)
- throw INTERP_KERNEL::Exception("No mesh dimension specified !");
+ throw INTERP_KERNEL::Exception("No mesh dimension specified !");
if(_mesh_dim!=-1)
MEDCouplingPointSet::checkCoherency();
for(std::set<INTERP_KERNEL::NormalizedCellType>::const_iterator iter=_types.begin();iter!=_types.end();iter++)
*
* \param [in] nbOfCells - estimation of the number of cell \a this mesh will contain.
*
+ * \if ENABLE_EXAMPLES
* \ref medcouplingcppexamplesUmeshStdBuild1 "Here is a C++ example".<br>
* \ref medcouplingpyexamplesUmeshStdBuild1 "Here is a Python example".
+ * \endif
*/
void MEDCouplingUMesh::allocateCells(int nbOfCells)
{
* \param [in] size - number of nodes constituting this cell.
* \param [in] nodalConnOfCell - the connectivity of the cell to add.
*
+ * \if ENABLE_EXAMPLES
* \ref medcouplingcppexamplesUmeshStdBuild1 "Here is a C++ example".<br>
* \ref medcouplingpyexamplesUmeshStdBuild1 "Here is a Python example".
+ * \endif
*/
void MEDCouplingUMesh::insertNextCell(INTERP_KERNEL::NormalizedCellType type, int size, const int *nodalConnOfCell)
{
* Compacts data arrays to release unused memory. This method is to be called after
* finishing cell insertion using \a this->insertNextCell().
*
+ * \if ENABLE_EXAMPLES
* \ref medcouplingcppexamplesUmeshStdBuild1 "Here is a C++ example".<br>
* \ref medcouplingpyexamplesUmeshStdBuild1 "Here is a Python example".
+ * \endif
*/
void MEDCouplingUMesh::finishInsertingCells()
{
*/
void MEDCouplingUMesh::checkFastEquivalWith(const MEDCouplingMesh *other, double prec) const
{
- MEDCouplingPointSet::checkFastEquivalWith(other,prec);
- const MEDCouplingUMesh *otherC=dynamic_cast<const MEDCouplingUMesh *>(other);
+ MEDCouplingPointSet::checkFastEquivalWith(other,prec);
+ const MEDCouplingUMesh *otherC=dynamic_cast<const MEDCouplingUMesh *>(other);
if(!otherC)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::checkFastEquivalWith : Two meshes are not not unstructured !");
}
* \throw If the coordinates array is not set.
* \throw If the nodal connectivity of cells is not defined.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_getReverseNodalConnectivity "Here is a C++ example".<br>
* \ref py_mcumesh_getReverseNodalConnectivity "Here is a Python example".
+ * \endif
*/
void MEDCouplingUMesh::getReverseNodalConnectivity(DataArrayInt *revNodal, DataArrayInt *revNodalIndx) const
{
* \throw If \a desc == NULL || \a descIndx == NULL || \a revDesc == NULL || \a
* revDescIndx == NULL.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_buildDescendingConnectivity "Here is a C++ example".<br>
* \ref py_mcumesh_buildDescendingConnectivity "Here is a Python example".
+ * \endif
* \sa buildDescendingConnectivity2()
*/
MEDCouplingUMesh *MEDCouplingUMesh::buildDescendingConnectivity(DataArrayInt *desc, DataArrayInt *descIndx, DataArrayInt *revDesc, DataArrayInt *revDescIndx) const
* \throw If \a desc == NULL || \a descIndx == NULL || \a revDesc == NULL || \a
* revDescIndx == NULL.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_buildDescendingConnectivity2 "Here is a C++ example".<br>
* \ref py_mcumesh_buildDescendingConnectivity2 "Here is a Python example".
+ * \endif
* \sa buildDescendingConnectivity()
*/
MEDCouplingUMesh *MEDCouplingUMesh::buildDescendingConnectivity2(DataArrayInt *desc, DataArrayInt *descIndx, DataArrayInt *revDesc, DataArrayInt *revDescIndx) const
* \b WARNING this method do the assumption that connectivity lies on the coordinates set.
* For speed reasons no check of this will be done. This method calls MEDCouplingUMesh::buildDescendingConnectivity to compute the result.
* This method lists cell by cell in \b this which are its neighbors. To compute the result only connectivities are considered.
- * The a cell with id 'cellId' its neighbors are neighbors[neighborsIndx[cellId]:neighborsIndx[cellId+1]].
+ * The neighbor cells of cell having id 'cellId' are neighbors[neighborsIndx[cellId]:neighborsIndx[cellId+1]].
*
* \param [out] neighbors is an array storing all the neighbors of all cells in \b this. This array is newly allocated and should be dealt by the caller. \b neighborsIndx 2nd output
* parameter allows to select the right part in this array. The number of tuples is equal to the last values in \b neighborsIndx.
* excluding a set of meshdim-1 cells in input descending connectivity.
* Typically \b desc, \b descIndx, \b revDesc and \b revDescIndx input params are the result of MEDCouplingUMesh::buildDescendingConnectivity.
* This method lists cell by cell in \b this which are its neighbors. To compute the result only connectivities are considered.
- * The a cell with id 'cellId' its neighbors are neighbors[neighborsIndx[cellId]:neighborsIndx[cellId+1]].
+ * The neighbor cells of cell having id 'cellId' are neighbors[neighborsIndx[cellId]:neighborsIndx[cellId+1]].
*
* \param [in] desc descending connectivity array.
* \param [in] descIndx descending connectivity index array used to walk through \b desc.
* \param [out] neighborsIndx is an array of size this->getNumberOfCells()+1 newly allocated and should be dealt by the caller. This arrays allow to use the first output parameter \b neighbors.
*/
void MEDCouplingUMesh::ComputeNeighborsOfCellsAdv(const DataArrayInt *desc, const DataArrayInt *descIndx, const DataArrayInt *revDesc, const DataArrayInt *revDescIndx,
- DataArrayInt *&neighbors, DataArrayInt *&neighborsIndx) throw(INTERP_KERNEL::Exception)
+ DataArrayInt *&neighbors, DataArrayInt *&neighborsIndx)
{
if(!desc || !descIndx || !revDesc || !revDescIndx)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::ComputeNeighborsOfCellsAdv some input array is empty !");
neighborsIndx=out1.retn();
}
+/*!
+ * \b WARNING this method do the assumption that connectivity lies on the coordinates set.
+ * For speed reasons no check of this will be done. This method calls MEDCouplingUMesh::buildDescendingConnectivity to compute the result.
+ * This method lists node by node in \b this which are its neighbors. To compute the result only connectivities are considered.
+ * The neighbor nodes of node having id 'nodeId' are neighbors[neighborsIndx[cellId]:neighborsIndx[cellId+1]].
+ *
+ * \param [out] neighbors is an array storing all the neighbors of all nodes in \b this. This array is newly allocated and should be dealt by the caller. \b neighborsIndx 2nd output
+ * parameter allows to select the right part in this array. The number of tuples is equal to the last values in \b neighborsIndx.
+ * \param [out] neighborsIndx is an array of size this->getNumberOfCells()+1 newly allocated and should be dealt by the caller. This arrays allow to use the first output parameter \b neighbors.
+ */
+void MEDCouplingUMesh::computeNeighborsOfNodes(DataArrayInt *&neighbors, DataArrayInt *&neighborsIdx) const
+{
+ checkFullyDefined();
+ int mdim(getMeshDimension()),nbNodes(getNumberOfNodes());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> desc(DataArrayInt::New()),descIndx(DataArrayInt::New()),revDesc(DataArrayInt::New()),revDescIndx(DataArrayInt::New());
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> mesh1D;
+ switch(mdim)
+ {
+ case 3:
+ {
+ mesh1D=explode3DMeshTo1D(desc,descIndx,revDesc,revDescIndx);
+ break;
+ }
+ case 2:
+ {
+ mesh1D=buildDescendingConnectivity(desc,descIndx,revDesc,revDescIndx);
+ break;
+ }
+ case 1:
+ {
+ mesh1D=const_cast<MEDCouplingUMesh *>(this);
+ mesh1D->incrRef();
+ break;
+ }
+ default:
+ {
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::computeNeighborsOfNodes : Mesh dimension supported are [3,2,1] !");
+ }
+ }
+ desc=DataArrayInt::New(); descIndx=DataArrayInt::New(); revDesc=0; revDescIndx=0;
+ mesh1D->getReverseNodalConnectivity(desc,descIndx);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret0(DataArrayInt::New());
+ ret0->alloc(desc->getNumberOfTuples(),1);
+ int *r0Pt(ret0->getPointer());
+ const int *c1DPtr(mesh1D->getNodalConnectivity()->begin()),*rn(desc->begin()),*rni(descIndx->begin());
+ for(int i=0;i<nbNodes;i++,rni++)
+ {
+ for(const int *oneDCellIt=rn+rni[0];oneDCellIt!=rn+rni[1];oneDCellIt++)
+ *r0Pt++=c1DPtr[3*(*oneDCellIt)+1]==i?c1DPtr[3*(*oneDCellIt)+2]:c1DPtr[3*(*oneDCellIt)+1];
+ }
+ neighbors=ret0.retn();
+ neighborsIdx=descIndx.retn();
+}
+
/// @cond INTERNAL
/*!
* \throw If the nodal connectivity of cells is node defined.
* \throw If dimension of \a this mesh is not either 2 or 3.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_convertToPolyTypes "Here is a C++ example".<br>
* \ref py_mcumesh_convertToPolyTypes "Here is a Python example".
+ * \endif
*/
void MEDCouplingUMesh::convertToPolyTypes(const int *cellIdsToConvertBg, const int *cellIdsToConvertEnd)
{
int dim=getMeshDimension();
if(dim<2 || dim>3)
throw INTERP_KERNEL::Exception("Invalid mesh dimension : must be 2 or 3 !");
- int nbOfCells=getNumberOfCells();
+ int nbOfCells(getNumberOfCells());
if(dim==2)
{
const int *connIndex=_nodal_connec_index->getConstPointer();
}
else
{
- int *connIndex=_nodal_connec_index->getPointer();
- int connIndexLgth=_nodal_connec_index->getNbOfElems();
- const int *connOld=_nodal_connec->getConstPointer();
- int connOldLgth=_nodal_connec->getNbOfElems();
- std::vector<int> connNew(connOld,connOld+connOldLgth);
+ int *connIndex(_nodal_connec_index->getPointer());
+ const int *connOld(_nodal_connec->getConstPointer());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> connNew(DataArrayInt::New()),connNewI(DataArrayInt::New()); connNew->alloc(0,1); connNewI->alloc(1,1); connNewI->setIJ(0,0,0);
+ std::vector<bool> toBeDone(nbOfCells,false);
for(const int *iter=cellIdsToConvertBg;iter!=cellIdsToConvertEnd;iter++)
{
if(*iter>=0 && *iter<nbOfCells)
+ toBeDone[*iter]=true;
+ else
+ {
+ std::ostringstream oss; oss << "MEDCouplingUMesh::convertToPolyTypes : On rank #" << std::distance(cellIdsToConvertBg,iter) << " value is " << *iter << " which is not";
+ oss << " in range [0," << nbOfCells << ") !";
+ throw INTERP_KERNEL::Exception(oss.str().c_str());
+ }
+ }
+ for(int cellId=0;cellId<nbOfCells;cellId++)
+ {
+ int pos(connIndex[cellId]),posP1(connIndex[cellId+1]);
+ int lgthOld(posP1-pos-1);
+ if(toBeDone[cellId])
{
- int pos=connIndex[*iter];
- int posP1=connIndex[(*iter)+1];
- int lgthOld=posP1-pos-1;
- const INTERP_KERNEL::CellModel& cm=INTERP_KERNEL::CellModel::GetCellModel((INTERP_KERNEL::NormalizedCellType)connNew[pos]);
- connNew[pos]=INTERP_KERNEL::NORM_POLYHED;
- unsigned nbOfFaces=cm.getNumberOfSons2(&connNew[pos+1],lgthOld);
- int *tmp=new int[nbOfFaces*lgthOld];
- int *work=tmp;
- for(int j=0;j<(int)nbOfFaces;j++)
+ const INTERP_KERNEL::CellModel& cm=INTERP_KERNEL::CellModel::GetCellModel((INTERP_KERNEL::NormalizedCellType)connOld[pos]);
+ unsigned nbOfFaces(cm.getNumberOfSons2(connOld+pos+1,lgthOld));
+ int *tmp(new int[nbOfFaces*lgthOld+1]);
+ int *work=tmp; *work++=INTERP_KERNEL::NORM_POLYHED;
+ for(unsigned j=0;j<nbOfFaces;j++)
{
INTERP_KERNEL::NormalizedCellType type;
- unsigned offset=cm.fillSonCellNodalConnectivity2(j,&connNew[pos+1],lgthOld,work,type);
+ unsigned offset=cm.fillSonCellNodalConnectivity2(j,connOld+pos+1,lgthOld,work,type);
work+=offset;
*work++=-1;
}
- std::size_t newLgth=std::distance(tmp,work)-1;
- std::size_t delta=newLgth-lgthOld;
- std::transform(connIndex+(*iter)+1,connIndex+connIndexLgth,connIndex+(*iter)+1,std::bind2nd(std::plus<int>(),delta));
- connNew.insert(connNew.begin()+posP1,tmp+lgthOld,tmp+newLgth);
- std::copy(tmp,tmp+lgthOld,connNew.begin()+pos+1);
+ std::size_t newLgth(std::distance(tmp,work)-1);//-1 for last -1
+ connNew->pushBackValsSilent(tmp,tmp+newLgth);
+ connNewI->pushBackSilent(connNewI->back()+(int)newLgth);
delete [] tmp;
}
else
{
- std::ostringstream oss; oss << "MEDCouplingUMesh::convertToPolyTypes : On rank #" << std::distance(cellIdsToConvertBg,iter) << " value is " << *iter << " which is not";
- oss << " in range [0," << nbOfCells << ") !";
- throw INTERP_KERNEL::Exception(oss.str().c_str());
+ connNew->pushBackValsSilent(connOld+pos,connOld+posP1);
+ connNewI->pushBackSilent(connNewI->back()+posP1-pos);
}
}
- _nodal_connec->alloc((int)connNew.size(),1);
- int *newConnPtr=_nodal_connec->getPointer();
- std::copy(connNew.begin(),connNew.end(),newConnPtr);
+ setConnectivity(connNew,connNewI,false);//false because computeTypes called just behind.
}
computeTypes();
}
* \throw If \a this mesh contains polyhedrons with the valid connectivity.
* \throw If \a this mesh contains polyhedrons with odd number of nodes.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_arePolyhedronsNotCorrectlyOriented "Here is a C++ example".<br>
* \ref py_mcumesh_arePolyhedronsNotCorrectlyOriented "Here is a Python example".
+ * \endif
*/
void MEDCouplingUMesh::convertExtrudedPolyhedra()
{
if(cm.isDynamic())
{
switch(cm.getDimension())
- {
+ {
case 2:
{
INTERP_KERNEL::AutoPtr<int> tmp=new int[lgthOfCurCell-1];
newType=(lgthOfCurCell==3)?INTERP_KERNEL::NORM_SEG2:INTERP_KERNEL::NORM_POLYL;
break;
}
- }
+ }
ret=ret || (newType!=type);
conn[newPos]=newType;
newPos+=newLgth+1;
* the format of returned DataArrayInt instance.
*
* \return a newly allocated DataArrayInt sorted ascendingly of fetched node ids.
- * \sa MEDCouplingUMesh::getNodeIdsInUse
+ * \sa MEDCouplingUMesh::getNodeIdsInUse, areAllNodesFetched
*/
DataArrayInt *MEDCouplingUMesh::computeFetchedNodeIds() const
{
/*!
* \param [in,out] nodeIdsInUse an array of size typically equal to nbOfNodes.
- * \sa MEDCouplingUMesh::getNodeIdsInUse
+ * \sa MEDCouplingUMesh::getNodeIdsInUse, areAllNodesFetched
*/
void MEDCouplingUMesh::computeNodeIdsAlg(std::vector<bool>& nodeIdsInUse) const
{
- int nbOfNodes=(int)nodeIdsInUse.size();
- int nbOfCells=getNumberOfCells();
- const int *connIndex=_nodal_connec_index->getConstPointer();
- const int *conn=_nodal_connec->getConstPointer();
+ int nbOfNodes((int)nodeIdsInUse.size()),nbOfCells(getNumberOfCells());
+ const int *connIndex(_nodal_connec_index->getConstPointer()),*conn(_nodal_connec->getConstPointer());
for(int i=0;i<nbOfCells;i++)
for(int j=connIndex[i]+1;j<connIndex[i+1];j++)
if(conn[j]>=0)
nodeIdsInUse[conn[j]]=true;
else
{
- std::ostringstream oss; oss << "MEDCouplingUMesh::getNodeIdsInUse : In cell #" << i << " presence of node id " << conn[j] << " not in [0," << nbOfNodes << ") !";
+ std::ostringstream oss; oss << "MEDCouplingUMesh::computeNodeIdsAlg : In cell #" << i << " presence of node id " << conn[j] << " not in [0," << nbOfNodes << ") !";
throw INTERP_KERNEL::Exception(oss.str().c_str());
}
}
* \throw If the nodal connectivity of cells is not defined.
* \throw If the nodal connectivity includes an invalid id.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_getNodeIdsInUse "Here is a C++ example".<br>
* \ref py_mcumesh_getNodeIdsInUse "Here is a Python example".
- * \sa computeNodeIdsAlg()
+ * \endif
+ * \sa computeFetchedNodeIds, computeNodeIdsAlg()
*/
DataArrayInt *MEDCouplingUMesh::getNodeIdsInUse(int& nbrOfNodesInUse) const
{
nbrOfNodesInUse=-1;
- int nbOfNodes=getNumberOfNodes();
+ int nbOfNodes(getNumberOfNodes());
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
ret->alloc(nbOfNodes,1);
int *traducer=ret->getPointer();
* \throw If the coordinates array is not set.
* \throw If the nodal connectivity of cells is not defined.
* \throw If the nodal connectivity includes an invalid id.
+ * \sa areAllNodesFetched
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_zipCoordsTraducer "Here is a C++ example".<br>
* \ref py_mcumesh_zipCoordsTraducer "Here is a Python example".
+ * \endif
*/
DataArrayInt *MEDCouplingUMesh::zipCoordsTraducer()
{
int MEDCouplingUMesh::AreCellsEqual(const int *conn, const int *connI, int cell1, int cell2, int compType)
{
switch(compType)
- {
+ {
case 0:
return AreCellsEqual0(conn,connI,cell1,cell2);
case 1:
return AreCellsEqual3(conn,connI,cell1,cell2);
case 7:
return AreCellsEqual7(conn,connI,cell1,cell2);
- }
+ }
throw INTERP_KERNEL::Exception("Unknown comparison asked ! Must be in 0,1,2,3 or 7.");
}
else
return 0;
}
-
+
return work!=tmp+sz1?1:0;
}
else
}
void MEDCouplingUMesh::FindCommonCellsAlg(int compType, int startCellId, const DataArrayInt *nodal, const DataArrayInt *nodalI, const DataArrayInt *revNodal, const DataArrayInt *revNodalI,
- DataArrayInt *& commonCellsArr, DataArrayInt *& commonCellsIArr) throw(INTERP_KERNEL::Exception)
+ DataArrayInt *& commonCellsArr, DataArrayInt *& commonCellsIArr)
{
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> commonCells=DataArrayInt::New(),commonCellsI=DataArrayInt::New(); commonCells->alloc(0,1);
int nbOfCells=nodalI->getNumberOfTuples()-1;
* \return bool - \c true if all cells of \a other mesh are present in the \a this
* mesh.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_areCellsIncludedIn "Here is a C++ example".<br>
* \ref py_mcumesh_areCellsIncludedIn "Here is a Python example".
+ * \endif
* \sa checkDeepEquivalOnSameNodesWith()
* \sa checkGeoEquivalWith()
*/
* \throw If the nodal connectivity of cells is not defined.
* \throw If any cell id in the array \a begin is not valid.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_buildPartOfMySelf "Here is a C++ example".<br>
* \ref py_mcumesh_buildPartOfMySelf "Here is a Python example".
+ * \endif
*/
MEDCouplingPointSet *MEDCouplingUMesh::buildPartOfMySelf(const int *begin, const int *end, bool keepCoords) const
{
* \throw If the nodal connectivity of cells is not defined.
* \throw If any node id in \a begin is not valid.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_buildFacePartOfMySelfNode "Here is a C++ example".<br>
* \ref py_mcumesh_buildFacePartOfMySelfNode "Here is a Python example".
+ * \endif
*/
MEDCouplingPointSet *MEDCouplingUMesh::buildFacePartOfMySelfNode(const int *begin, const int *end, bool fullyIn) const
{
* \throw If the coordinates array is not set.
* \throw If the nodal connectivity of cells is not defined.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_buildBoundaryMesh "Here is a C++ example".<br>
* \ref py_mcumesh_buildBoundaryMesh "Here is a Python example".
+ * \endif
*/
MEDCouplingPointSet *MEDCouplingUMesh::buildBoundaryMesh(bool keepCoords) const
{
* \throw If the coordinates array is not set.
* \throw If the nodal connectivity of cells is node defined.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_findBoundaryNodes "Here is a C++ example".<br>
* \ref py_mcumesh_findBoundaryNodes "Here is a Python example".
+ * \endif
*/
DataArrayInt *MEDCouplingUMesh::findBoundaryNodes() const
{
* \warning This method modifies param \b otherDimM1OnSameCoords (for speed reasons).
*/
void MEDCouplingUMesh::findNodesToDuplicate(const MEDCouplingUMesh& otherDimM1OnSameCoords, DataArrayInt *& nodeIdsToDuplicate,
- DataArrayInt *& cellIdsNeededToBeRenum, DataArrayInt *& cellIdsNotModified) const throw(INTERP_KERNEL::Exception)
+ DataArrayInt *& cellIdsNeededToBeRenum, DataArrayInt *& cellIdsNotModified) const
{
checkFullyDefined();
otherDimM1OnSameCoords.checkFullyDefined();
duplicateNodesInConn(nodeIdsToDuplicateBg,nodeIdsToDuplicateEnd,nbOfNodes);
}
+/*!
+ * This method renumbers only nodal connectivity in \a this. The renumbering is only an offset applied. So this method is a specialization of
+ * \a renumberNodesInConn. \b WARNING, this method does not check that the resulting node ids in the nodal connectivity is in a valid range !
+ *
+ * \param [in] offset - specifies the offset to be applied on each element of connectivity.
+ *
+ * \sa renumberNodesInConn
+ */
+void MEDCouplingUMesh::renumberNodesWithOffsetInConn(int offset)
+{
+ checkConnectivityFullyDefined();
+ int *conn(getNodalConnectivity()->getPointer());
+ const int *connIndex(getNodalConnectivityIndex()->getConstPointer());
+ int nbOfCells(getNumberOfCells());
+ for(int i=0;i<nbOfCells;i++)
+ for(int iconn=connIndex[i]+1;iconn!=connIndex[i+1];iconn++)
+ {
+ int& node=conn[iconn];
+ if(node>=0)//avoid polyhedron separator
+ {
+ node+=offset;
+ }
+ }
+ _nodal_connec->declareAsNew();
+ updateTime();
+}
+
+/*!
+ * Same than renumberNodesInConn(const int *) except that here the format of old-to-new traducer is using map instead
+ * of array. This method is dedicated for renumbering from a big set of nodes the a tiny set of nodes which is the case during extraction
+ * of a big mesh.
+ */
+void MEDCouplingUMesh::renumberNodesInConn(const INTERP_KERNEL::HashMap<int,int>& newNodeNumbersO2N)
+{
+ checkConnectivityFullyDefined();
+ int *conn(getNodalConnectivity()->getPointer());
+ const int *connIndex(getNodalConnectivityIndex()->getConstPointer());
+ int nbOfCells(getNumberOfCells());
+ for(int i=0;i<nbOfCells;i++)
+ for(int iconn=connIndex[i]+1;iconn!=connIndex[i+1];iconn++)
+ {
+ int& node=conn[iconn];
+ if(node>=0)//avoid polyhedron separator
+ {
+ INTERP_KERNEL::HashMap<int,int>::const_iterator it(newNodeNumbersO2N.find(node));
+ if(it!=newNodeNumbersO2N.end())
+ {
+ node=(*it).second;
+ }
+ else
+ {
+ std::ostringstream oss; oss << "MEDCouplingUMesh::renumberNodesInConn(map) : presence in connectivity for cell #" << i << " of node #" << node << " : Not in map !";
+ throw INTERP_KERNEL::Exception(oss.str().c_str());
+ }
+ }
+ }
+ _nodal_connec->declareAsNew();
+ updateTime();
+}
+
/*!
* Changes ids of nodes within the nodal connectivity arrays according to a permutation
* array in "Old to New" mode. The node coordinates array is \b not changed by this method.
* See \ref MEDCouplingArrayRenumbering for more info on renumbering modes.
* \throw If the nodal connectivity of cells is not defined.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_renumberNodesInConn "Here is a C++ example".<br>
* \ref py_mcumesh_renumberNodesInConn "Here is a Python example".
+ * \endif
*/
void MEDCouplingUMesh::renumberNodesInConn(const int *newNodeNumbersO2N)
{
checkConnectivityFullyDefined();
int *conn=getNodalConnectivity()->getPointer();
const int *connIndex=getNodalConnectivityIndex()->getConstPointer();
- int nbOfCells=getNumberOfCells();
+ int nbOfCells(getNumberOfCells());
for(int i=0;i<nbOfCells;i++)
for(int iconn=connIndex[i]+1;iconn!=connIndex[i+1];iconn++)
{
* \throw If the coordinates array is not set.
* \throw If the nodal connectivity of cells is not defined.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_getCellsInBoundingBox "Here is a C++ example".<br>
* \ref py_mcumesh_getCellsInBoundingBox "Here is a Python example".
+ * \endif
*/
DataArrayInt *MEDCouplingUMesh::getCellsInBoundingBox(const double *bbox, double eps) const
{
*/
DataArrayInt *MEDCouplingUMesh::giveCellsWithType(INTERP_KERNEL::NormalizedCellType type) const
{
-
+
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New();
ret->alloc(0,1);
checkConnectivityFullyDefined();
* If 'deeCpy' is true all arrays (coordinates and connectivities) are deeply copied.
*/
MEDCouplingUMesh::MEDCouplingUMesh(const MEDCouplingUMesh& other, bool deepCopy):MEDCouplingPointSet(other,deepCopy),_mesh_dim(other._mesh_dim),
- _nodal_connec(0),_nodal_connec_index(0),
- _types(other._types)
+ _nodal_connec(0),_nodal_connec_index(0),
+ _types(other._types)
{
if(other._nodal_connec)
_nodal_connec=other._nodal_connec->performCpy(deepCopy);
* \return DataArrayDouble * - a new instance of DataArrayDouble. The caller is to
* delete this array using decrRef() as it is no more needed.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_getPartMeasureField "Here is a C++ example".<br>
* \ref py_mcumesh_getPartMeasureField "Here is a Python example".
+ * \endif
* \sa getMeasureField()
*/
DataArrayDouble *MEDCouplingUMesh::getPartMeasureField(bool isAbs, const int *begin, const int *end) const
* \throw If the mesh and space dimension is not as specified above.
* \sa buildOrthogonalField()
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_buildPartOrthogonalField "Here is a C++ example".<br>
* \ref py_mcumesh_buildPartOrthogonalField "Here is a Python example".
+ * \endif
*/
MEDCouplingFieldDouble *MEDCouplingUMesh::buildPartOrthogonalField(const int *begin, const int *end) const
{
*/
MEDCouplingFieldDouble *MEDCouplingUMesh::buildDirectionVectorField() const
{
- if(getMeshDimension()!=1)
+ if(getMeshDimension()!=1)
throw INTERP_KERNEL::Exception("Expected a umesh with meshDim == 1 for buildDirectionVectorField !");
- if(_types.size()!=1 || *(_types.begin())!=INTERP_KERNEL::NORM_SEG2)
- throw INTERP_KERNEL::Exception("Expected a umesh with only NORM_SEG2 type of elements for buildDirectionVectorField !");
- MEDCouplingAutoRefCountObjectPtr<MEDCouplingFieldDouble> ret=MEDCouplingFieldDouble::New(ON_CELLS,ONE_TIME);
- MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> array=DataArrayDouble::New();
- int nbOfCells=getNumberOfCells();
- int spaceDim=getSpaceDimension();
- array->alloc(nbOfCells,spaceDim);
- double *pt=array->getPointer();
- const double *coo=getCoords()->getConstPointer();
- std::vector<int> conn;
- conn.reserve(2);
- for(int i=0;i<nbOfCells;i++)
- {
- conn.resize(0);
- getNodeIdsOfCell(i,conn);
- pt=std::transform(coo+conn[1]*spaceDim,coo+(conn[1]+1)*spaceDim,coo+conn[0]*spaceDim,pt,std::minus<double>());
- }
- ret->setArray(array);
- ret->setMesh(this);
- ret->synchronizeTimeWithSupport();
- return ret.retn();
+ if(_types.size()!=1 || *(_types.begin())!=INTERP_KERNEL::NORM_SEG2)
+ throw INTERP_KERNEL::Exception("Expected a umesh with only NORM_SEG2 type of elements for buildDirectionVectorField !");
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingFieldDouble> ret=MEDCouplingFieldDouble::New(ON_CELLS,ONE_TIME);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> array=DataArrayDouble::New();
+ int nbOfCells=getNumberOfCells();
+ int spaceDim=getSpaceDimension();
+ array->alloc(nbOfCells,spaceDim);
+ double *pt=array->getPointer();
+ const double *coo=getCoords()->getConstPointer();
+ std::vector<int> conn;
+ conn.reserve(2);
+ for(int i=0;i<nbOfCells;i++)
+ {
+ conn.resize(0);
+ getNodeIdsOfCell(i,conn);
+ pt=std::transform(coo+conn[1]*spaceDim,coo+(conn[1]+1)*spaceDim,coo+conn[0]*spaceDim,pt,std::minus<double>());
+ }
+ ret->setArray(array);
+ ret->setMesh(this);
+ ret->synchronizeTimeWithSupport();
+ return ret.retn();
}
/*!
if(angle>eps)
{
MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> coo=_coords->deepCpy();
- MEDCouplingPointSet::Rotate3DAlg(origin,vec2,angle,coo->getNumberOfTuples(),coo->getPointer());
+ double normm2(sqrt(vec2[0]*vec2[0]+vec2[1]*vec2[1]+vec2[2]*vec2[2]));
+ if(normm2/normm>1e-6)
+ MEDCouplingPointSet::Rotate3DAlg(origin,vec2,angle,coo->getNumberOfTuples(),coo->getPointer());
MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> mw=clone(false);//false -> shallow copy
mw->setCoords(coo);
mw->getBoundingBox(bbox);
{
if(getMeshDimension()!=1)
throw INTERP_KERNEL::Exception("Expected a umesh with meshDim == 1 for project1D !");
- if(_types.size()!=1 || *(_types.begin())!=INTERP_KERNEL::NORM_SEG2)
- throw INTERP_KERNEL::Exception("Expected a umesh with only NORM_SEG2 type of elements for project1D !");
- if(getSpaceDimension()!=3)
- throw INTERP_KERNEL::Exception("Expected a umesh with spaceDim==3 for project1D !");
- MEDCouplingAutoRefCountObjectPtr<MEDCouplingFieldDouble> f=buildDirectionVectorField();
- const double *fPtr=f->getArray()->getConstPointer();
- double tmp[3];
- for(int i=0;i<getNumberOfCells();i++)
- {
- const double *tmp1=fPtr+3*i;
- tmp[0]=tmp1[1]*v[2]-tmp1[2]*v[1];
- tmp[1]=tmp1[2]*v[0]-tmp1[0]*v[2];
- tmp[2]=tmp1[0]*v[1]-tmp1[1]*v[0];
- double n1=INTERP_KERNEL::norm<3>(tmp);
- n1/=INTERP_KERNEL::norm<3>(tmp1);
- if(n1>eps)
- throw INTERP_KERNEL::Exception("UMesh::Projection 1D failed !");
- }
- const double *coo=getCoords()->getConstPointer();
- for(int i=0;i<getNumberOfNodes();i++)
- {
- std::transform(coo+i*3,coo+i*3+3,pt,tmp,std::minus<double>());
- std::transform(tmp,tmp+3,v,tmp,std::multiplies<double>());
- res[i]=std::accumulate(tmp,tmp+3,0.);
- }
+ if(_types.size()!=1 || *(_types.begin())!=INTERP_KERNEL::NORM_SEG2)
+ throw INTERP_KERNEL::Exception("Expected a umesh with only NORM_SEG2 type of elements for project1D !");
+ if(getSpaceDimension()!=3)
+ throw INTERP_KERNEL::Exception("Expected a umesh with spaceDim==3 for project1D !");
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingFieldDouble> f=buildDirectionVectorField();
+ const double *fPtr=f->getArray()->getConstPointer();
+ double tmp[3];
+ for(int i=0;i<getNumberOfCells();i++)
+ {
+ const double *tmp1=fPtr+3*i;
+ tmp[0]=tmp1[1]*v[2]-tmp1[2]*v[1];
+ tmp[1]=tmp1[2]*v[0]-tmp1[0]*v[2];
+ tmp[2]=tmp1[0]*v[1]-tmp1[1]*v[0];
+ double n1=INTERP_KERNEL::norm<3>(tmp);
+ n1/=INTERP_KERNEL::norm<3>(tmp1);
+ if(n1>eps)
+ throw INTERP_KERNEL::Exception("UMesh::Projection 1D failed !");
+ }
+ const double *coo=getCoords()->getConstPointer();
+ for(int i=0;i<getNumberOfNodes();i++)
+ {
+ std::transform(coo+i*3,coo+i*3+3,pt,tmp,std::minus<double>());
+ std::transform(tmp,tmp+3,v,tmp,std::multiplies<double>());
+ res[i]=std::accumulate(tmp,tmp+3,0.);
+ }
}
/*!
* \a this is expected to be a mesh so that its space dimension is equal to its
* mesh dimension + 1. Furthermore only mesh dimension 1 and 2 are supported for the moment.
* Distance from \a ptBg to \a ptEnd is expected to be equal to the space dimension. \a this is also expected to be fully defined (connectivity and coordinates).
-
+ *
* WARNING, if there is some orphan nodes in \a this (nodes not fetched by any cells in \a this ( see MEDCouplingUMesh::zipCoords ) ) these nodes will ** not ** been taken
* into account in this method. Only cells and nodes lying on them are considered in the algorithm (even if one of these orphan nodes is closer than returned distance).
* A user that needs to consider orphan nodes should invoke DataArrayDouble::minimalDistanceTo method on the coordinates array of \a this.
MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> bboxArr(getBoundingBoxForBBTree());
const double *bbox(bboxArr->begin());
switch(spaceDim)
- {
+ {
case 3:
{
BBTreeDst<3> myTree(bbox,0,0,nbCells);
}
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::distanceToPoints : only spacedim 2 and 3 supported !");
- }
+ }
cellIds=ret1.retn();
return ret0.retn();
}
for(const int *zeCell=cellIdsBg;zeCell!=cellIdsEnd;zeCell++)
{
switch((INTERP_KERNEL::NormalizedCellType)nc[ncI[*zeCell]])
- {
+ {
case INTERP_KERNEL::NORM_TRI3:
{
double tmp=INTERP_KERNEL::DistanceFromPtToTriInSpaceDim3(pt,coords+3*nc[ncI[*zeCell]+1],coords+3*nc[ncI[*zeCell]+2],coords+3*nc[ncI[*zeCell]+3]);
}
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::distanceToPoint3DSurfAlg : not managed cell type ! Supporting TRI3, QUAD4 and POLYGON !");
- }
+ }
}
}
ret0=std::numeric_limits<double>::max();
for(const int *zeCell=cellIdsBg;zeCell!=cellIdsEnd;zeCell++)
{
- switch((INTERP_KERNEL::NormalizedCellType)nc[ncI[*zeCell]])
- {
+ switch((INTERP_KERNEL::NormalizedCellType)nc[ncI[*zeCell]])
+ {
case INTERP_KERNEL::NORM_SEG2:
{
std::size_t uselessEntry=0;
}
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::distanceToPoint2DCurveAlg : not managed cell type ! Supporting SEG2 !");
- }
+ }
}
}
* \throw If the coordinates array is not set.
* \throw If \a this->getMeshDimension() != \a this->getSpaceDimension().
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_getCellsContainingPoint "Here is a C++ example".<br>
* \ref py_mcumesh_getCellsContainingPoint "Here is a Python example".
+ * \endif
*/
void MEDCouplingUMesh::getCellsContainingPoint(const double *pos, double eps, std::vector<int>& elts) const
{
// end
};
+ INTERP_KERNEL::Edge *MEDCouplingUMeshBuildQPFromEdge2(INTERP_KERNEL::NormalizedCellType typ, const int *bg, const double *coords2D, std::map< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node>,int>& m)
+ {
+ INTERP_KERNEL::Edge *ret(0);
+ MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node> n0(new INTERP_KERNEL::Node(coords2D[2*bg[0]],coords2D[2*bg[0]+1])),n1(new INTERP_KERNEL::Node(coords2D[2*bg[1]],coords2D[2*bg[1]+1]));
+ m[n0]=bg[0]; m[n1]=bg[1];
+ switch(typ)
+ {
+ case INTERP_KERNEL::NORM_SEG2:
+ {
+ ret=new INTERP_KERNEL::EdgeLin(n0,n1);
+ break;
+ }
+ case INTERP_KERNEL::NORM_SEG3:
+ {
+ INTERP_KERNEL::Node *n2(new INTERP_KERNEL::Node(coords2D[2*bg[2]],coords2D[2*bg[2]+1])); m[n2]=bg[2];
+ INTERP_KERNEL::EdgeLin *e1(new INTERP_KERNEL::EdgeLin(n0,n2)),*e2(new INTERP_KERNEL::EdgeLin(n2,n1));
+ INTERP_KERNEL::SegSegIntersector inters(*e1,*e2);
+ // is the SEG3 degenerated, and thus can be reduced to a SEG2?
+ bool colinearity(inters.areColinears());
+ delete e1; delete e2;
+ if(colinearity)
+ { ret=new INTERP_KERNEL::EdgeLin(n0,n1); }
+ else
+ { ret=new INTERP_KERNEL::EdgeArcCircle(n0,n2,n1); }
+ break;
+ }
+ default:
+ throw INTERP_KERNEL::Exception("MEDCouplingUMeshBuildQPFromEdge2 : Expecting a mesh with spaceDim==2 and meshDim==1 !");
+ }
+ return ret;
+ }
+
INTERP_KERNEL::Edge *MEDCouplingUMeshBuildQPFromEdge(INTERP_KERNEL::NormalizedCellType typ, std::map<int, std::pair<INTERP_KERNEL::Node *,bool> >& mapp2, const int *bg)
{
INTERP_KERNEL::Edge *ret=0;
switch(typ)
- {
+ {
case INTERP_KERNEL::NORM_SEG2:
{
ret=new INTERP_KERNEL::EdgeLin(mapp2[bg[0]].first,mapp2[bg[1]].first);
}
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMeshBuildQPFromEdge : Expecting a mesh with spaceDim==2 and meshDim==1 !");
- }
+ }
return ret;
}
* 'mapp' returns a mapping between local numbering in submesh (represented by a Node*) and the global node numbering in 'mDesc'.
*/
INTERP_KERNEL::QuadraticPolygon *MEDCouplingUMeshBuildQPFromMesh(const MEDCouplingUMesh *mDesc, const std::vector<int>& candidates,
- std::map<INTERP_KERNEL::Node *,int>& mapp)
- throw(INTERP_KERNEL::Exception)
+ std::map<INTERP_KERNEL::Node *,int>& mapp)
{
mapp.clear();
std::map<int, std::pair<INTERP_KERNEL::Node *,bool> > mapp2;//bool is for a flag specifying if node is boundary (true) or only a middle for SEG3.
* \throw If the coordinates array is not set.
* \throw If \a this->getMeshDimension() != \a this->getSpaceDimension().
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_getCellsContainingPoints "Here is a C++ example".<br>
* \ref py_mcumesh_getCellsContainingPoints "Here is a Python example".
+ * \endif
*/
void MEDCouplingUMesh::getCellsContainingPoints(const double *pos, int nbOfPoints, double eps,
MEDCouplingAutoRefCountObjectPtr<DataArrayInt>& elts, MEDCouplingAutoRefCountObjectPtr<DataArrayInt>& eltsIndex) const
}
/*else if(mDim==2)
{
-
+
}*/
else
throw INTERP_KERNEL::Exception("For spaceDim==3 only meshDim==3 implemented for getelementscontainingpoints !");
* its connectivity will remain unchanged. If the computation leads to a modification of nodal connectivity of a cell its geometric type will be modified to INTERP_KERNEL::NORM_POLYGON.
*
* \return a newly allocated array containing cellIds that have been modified if any. If no cells have been impacted by this method NULL is returned.
+ * \sa MEDCouplingUMesh::colinearize2D
*/
DataArrayInt *MEDCouplingUMesh::convexEnvelop2D()
{
else
throw INTERP_KERNEL::Exception("Invalid 2D mesh and 1D mesh because 2D mesh has quadratic cells and 1D is not fully quadratic !");
}
- zipCoords();
- int oldNbOfNodes=getNumberOfNodes();
+ int oldNbOfNodes(getNumberOfNodes());
MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> newCoords;
switch(policy)
- {
+ {
case 0:
{
newCoords=fillExtCoordsUsingTranslation(mesh1D,isQuad);
}
default:
throw INTERP_KERNEL::Exception("Not implemented extrusion policy : must be in (0) !");
- }
+ }
setCoords(newCoords);
- MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> ret=buildExtrudedMeshFromThisLowLev(oldNbOfNodes,isQuad);
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> ret(buildExtrudedMeshFromThisLowLev(oldNbOfNodes,isQuad));
updateTime();
return ret.retn();
}
double cosangle=i+1<nbOfLevsInVec?(p0r[0]-tmp3[0])*(p1r[0]-tmp3[0])+(p0r[1]-tmp3[1])*(p1r[1]-tmp3[1]):(p2r[0]-tmp3[0])*(p1r[0]-tmp3[0])+(p2r[1]-tmp3[1])*(p1r[1]-tmp3[1]);
double angle=acos(cosangle/(radius*radius));
tmp->rotate(end,vecPlane,angle);
-
}
retPtr=std::copy(tmp2->getConstPointer(),tmp2->getConstPointer()+tmp2->getNbOfElems(),retPtr);
}
*/
MEDCouplingUMesh *MEDCouplingUMesh::buildExtrudedMeshFromThisLowLev(int nbOfNodesOf1Lev, bool isQuad) const
{
- int nbOf1DCells=getNumberOfNodes()/nbOfNodesOf1Lev-1;
- int nbOf2DCells=getNumberOfCells();
- int nbOf3DCells=nbOf2DCells*nbOf1DCells;
- MEDCouplingUMesh *ret=MEDCouplingUMesh::New("Extruded",getMeshDimension()+1);
- const int *conn=_nodal_connec->getConstPointer();
- const int *connI=_nodal_connec_index->getConstPointer();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> newConn=DataArrayInt::New();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> newConnI=DataArrayInt::New();
+ int nbOf1DCells(getNumberOfNodes()/nbOfNodesOf1Lev-1);
+ int nbOf2DCells(getNumberOfCells());
+ int nbOf3DCells(nbOf2DCells*nbOf1DCells);
+ MEDCouplingUMesh *ret(MEDCouplingUMesh::New("Extruded",getMeshDimension()+1));
+ const int *conn(_nodal_connec->begin()),*connI(_nodal_connec_index->begin());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> newConn(DataArrayInt::New()),newConnI(DataArrayInt::New());
newConnI->alloc(nbOf3DCells+1,1);
- int *newConnIPtr=newConnI->getPointer();
+ int *newConnIPtr(newConnI->getPointer());
*newConnIPtr++=0;
std::vector<int> newc;
for(int j=0;j<nbOf2DCells;j++)
*newConnIPtr++=(int)newc.size();
}
newConn->alloc((int)(newc.size())*nbOf1DCells,1);
- int *newConnPtr=newConn->getPointer();
- int deltaPerLev=isQuad?2*nbOfNodesOf1Lev:nbOfNodesOf1Lev;
+ int *newConnPtr(newConn->getPointer());
+ int deltaPerLev(isQuad?2*nbOfNodesOf1Lev:nbOfNodesOf1Lev);
newConnIPtr=newConnI->getPointer();
for(int iz=0;iz<nbOf1DCells;iz++)
{
if(iz!=0)
std::transform(newConnIPtr+1,newConnIPtr+1+nbOf2DCells,newConnIPtr+1+iz*nbOf2DCells,std::bind2nd(std::plus<int>(),newConnIPtr[iz*nbOf2DCells]));
+ const int *posOfTypeOfCell(newConnIPtr);
for(std::vector<int>::const_iterator iter=newc.begin();iter!=newc.end();iter++,newConnPtr++)
{
- int icell=(int)(iter-newc.begin());
- if(std::find(newConnIPtr,newConnIPtr+nbOf2DCells,icell)==newConnIPtr+nbOf2DCells)
+ int icell((int)(iter-newc.begin()));//std::distance unfortunately cannot been called here in C++98
+ if(icell!=*posOfTypeOfCell)
{
if(*iter!=-1)
*newConnPtr=(*iter)+iz*deltaPerLev;
*newConnPtr=-1;
}
else
- *newConnPtr=(*iter);
+ {
+ *newConnPtr=*iter;
+ posOfTypeOfCell++;
+ }
}
}
ret->setConnectivity(newConn,newConnI,true);
MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> coordsSafe;
int meshDim=getMeshDimension();
switch(conversionType)
- {
+ {
case 0:
switch(meshDim)
- {
+ {
case 1:
ret=convertLinearCellsToQuadratic1D0(conn,connI,coords,types);
connSafe=conn; connISafe=connI; coordsSafe=coords;
break;
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertLinearCellsToQuadratic : conversion of type 0 mesh dimensions available are [1,2,3] !");
- }
+ }
break;
- case 1:
- {
- switch(meshDim)
- {
case 1:
- ret=convertLinearCellsToQuadratic1D0(conn,connI,coords,types);//it is not a bug. In 1D policy 0 and 1 are equals
- connSafe=conn; connISafe=connI; coordsSafe=coords;
- break;
- case 2:
- ret=convertLinearCellsToQuadratic2D1(conn,connI,coords,types);
- connSafe=conn; connISafe=connI; coordsSafe=coords;
- break;
- case 3:
- ret=convertLinearCellsToQuadratic3D1(conn,connI,coords,types);
- connSafe=conn; connISafe=connI; coordsSafe=coords;
- break;
+ {
+ switch(meshDim)
+ {
+ case 1:
+ ret=convertLinearCellsToQuadratic1D0(conn,connI,coords,types);//it is not a bug. In 1D policy 0 and 1 are equals
+ connSafe=conn; connISafe=connI; coordsSafe=coords;
+ break;
+ case 2:
+ ret=convertLinearCellsToQuadratic2D1(conn,connI,coords,types);
+ connSafe=conn; connISafe=connI; coordsSafe=coords;
+ break;
+ case 3:
+ ret=convertLinearCellsToQuadratic3D1(conn,connI,coords,types);
+ connSafe=conn; connISafe=connI; coordsSafe=coords;
+ break;
+ default:
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertLinearCellsToQuadratic : conversion of type 1 mesh dimensions available are [1,2,3] !");
+ }
+ break;
+ }
default:
- throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertLinearCellsToQuadratic : conversion of type 1 mesh dimensions available are [1,2,3] !");
- }
- break;
- }
- default:
- throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertLinearCellsToQuadratic : conversion type available are 0 (default, the simplest) and 1 (the most complex) !");
- }
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertLinearCellsToQuadratic : conversion type available are 0 (default, the simplest) and 1 (the most complex) !");
+ }
setConnectivity(connSafe,connISafe,false);
_types=types;
setCoords(coordsSafe);
return ret.retn();
}
+#if 0
+/*!
+ * This method only works if \a this has spaceDimension equal to 2 and meshDimension also equal to 2.
+ * This method allows to modify connectivity of cells in \a this that shares some edges in \a edgeIdsToBeSplit.
+ * The nodes to be added in those 2D cells are defined by the pair of \a nodeIdsToAdd and \a nodeIdsIndexToAdd.
+ * Length of \a nodeIdsIndexToAdd is expected to equal to length of \a edgeIdsToBeSplit + 1.
+ * The node ids in \a nodeIdsToAdd should be valid. Those nodes have to be sorted exactly following exactly the direction of the edge.
+ * This method can be seen as the opposite method of colinearize2D.
+ * This method can be lead to create some new nodes if quadratic polygon cells have to be split. In this case the added nodes will be put at the end
+ * to avoid to modify the numbering of existing nodes.
+ *
+ * \param [in] nodeIdsToAdd - the list of node ids to be added (\a nodeIdsIndexToAdd array allows to walk on this array)
+ * \param [in] nodeIdsIndexToAdd - the entry point of \a nodeIdsToAdd to point to the corresponding nodes to be added.
+ * \param [in] mesh1Desc - 1st output of buildDescendingConnectivity2 on \a this.
+ * \param [in] desc - 2nd output of buildDescendingConnectivity2 on \a this.
+ * \param [in] descI - 3rd output of buildDescendingConnectivity2 on \a this.
+ * \param [in] revDesc - 4th output of buildDescendingConnectivity2 on \a this.
+ * \param [in] revDescI - 5th output of buildDescendingConnectivity2 on \a this.
+ *
+ * \sa buildDescendingConnectivity2
+ */
+void MEDCouplingUMesh::splitSomeEdgesOf2DMesh(const DataArrayInt *nodeIdsToAdd, const DataArrayInt *nodeIdsIndexToAdd, const DataArrayInt *edgeIdsToBeSplit,
+ const MEDCouplingUMesh *mesh1Desc, const DataArrayInt *desc, const DataArrayInt *descI, const DataArrayInt *revDesc, const DataArrayInt *revDescI)
+{
+ if(!nodeIdsToAdd || !nodeIdsIndexToAdd || !edgeIdsToBeSplit || !mesh1Desc || !desc || !descI || !revDesc || !revDescI)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::splitSomeEdgesOf2DMesh : input pointers must be not NULL !");
+ nodeIdsToAdd->checkAllocated(); nodeIdsIndexToAdd->checkAllocated(); edgeIdsToBeSplit->checkAllocated(); desc->checkAllocated(); descI->checkAllocated(); revDesc->checkAllocated(); revDescI->checkAllocated();
+ if(getSpaceDimension()!=2 || getMeshDimension()!=2)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::splitSomeEdgesOf2DMesh : this must have spacedim=meshdim=2 !");
+ if(mesh1Desc->getSpaceDimension()!=2 || mesh1Desc->getMeshDimension()!=1)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::splitSomeEdgesOf2DMesh : mesh1Desc must be the explosion of this with spaceDim=2 and meshDim = 1 !");
+ //DataArrayInt *out0(0),*outi0(0);
+ //MEDCouplingUMesh::ExtractFromIndexedArrays(idsInDesc2DToBeRefined->begin(),idsInDesc2DToBeRefined->end(),dd3,dd4,out0,outi0);
+ //MEDCouplingAutoRefCountObjectPtr<DataArrayInt> out0s(out0),outi0s(outi0);
+ //out0s=out0s->buildUnique(); out0s->sort(true);
+}
+#endif
+
/*!
* Implementes \a conversionType 0 for meshes with meshDim = 1, of MEDCouplingUMesh::convertLinearCellsToQuadratic method.
* \return a newly created DataArrayInt instance that the caller should deal with containing cell ids of converted cells.
*/
DataArrayInt *MEDCouplingUMesh::convertLinearCellsToQuadratic2D0(DataArrayInt *&conn, DataArrayInt *&connI, DataArrayDouble *& coords, std::set<INTERP_KERNEL::NormalizedCellType>& types) const
{
-
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> desc(DataArrayInt::New()),descI(DataArrayInt::New()),tmp2(DataArrayInt::New()),tmp3(DataArrayInt::New());
MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> m1D=buildDescendingConnectivity(desc,descI,tmp2,tmp3); tmp2=0; tmp3=0;
return convertLinearCellsToQuadratic2DAnd3D0(m1D,desc,descI,conn,connI,coords,types);
DataArrayInt *MEDCouplingUMesh::simplexize(int policy)
{
switch(policy)
- {
+ {
case 0:
return simplexizePol0();
case 1:
return simplexizePol1();
case (int) INTERP_KERNEL::PLANAR_FACE_5:
- return simplexizePlanarFace5();
+ return simplexizePlanarFace5();
case (int) INTERP_KERNEL::PLANAR_FACE_6:
- return simplexizePlanarFace6();
+ return simplexizePlanarFace6();
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::simplexize : unrecognized policy ! Must be :\n - 0 or 1 (only available for meshdim=2) \n - PLANAR_FACE_5, PLANAR_FACE_6 (only for meshdim=3)");
- }
+ }
}
/*!
if((INTERP_KERNEL::NormalizedCellType)oldc[ci[0]]==INTERP_KERNEL::NORM_QUAD4)
{
const int tmp[8]={(int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+1],oldc[ci[0]+2],oldc[ci[0]+3],
- (int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+1],oldc[ci[0]+3],oldc[ci[0]+4]};
+ (int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+1],oldc[ci[0]+3],oldc[ci[0]+4]};
pt=std::copy(tmp,tmp+8,pt);
ptI[1]=ptI[0]+4;
ptI[2]=ptI[0]+8;
if((INTERP_KERNEL::NormalizedCellType)oldc[ci[0]]==INTERP_KERNEL::NORM_QUAD4)
{
const int tmp[8]={(int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+1],oldc[ci[0]+2],oldc[ci[0]+4],
- (int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+2],oldc[ci[0]+3],oldc[ci[0]+4]};
+ (int)INTERP_KERNEL::NORM_TRI3,oldc[ci[0]+2],oldc[ci[0]+3],oldc[ci[0]+4]};
pt=std::copy(tmp,tmp+8,pt);
ptI[1]=ptI[0]+4;
ptI[2]=ptI[0]+8;
* \throw If \a this->getMeshDimension() != 2.
* \throw If \a this->getSpaceDimension() != 3.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_are2DCellsNotCorrectlyOriented "Here is a C++ example".<br>
* \ref py_mcumesh_are2DCellsNotCorrectlyOriented "Here is a Python example".
+ * \endif
*/
void MEDCouplingUMesh::are2DCellsNotCorrectlyOriented(const double *vec, bool polyOnly, std::vector<int>& cells) const
{
* \throw If \a this->getMeshDimension() != 2.
* \throw If \a this->getSpaceDimension() != 3.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_are2DCellsNotCorrectlyOriented "Here is a C++ example".<br>
* \ref py_mcumesh_are2DCellsNotCorrectlyOriented "Here is a Python example".
+ * \endif
+ *
+ * \sa changeOrientationOfCells
*/
void MEDCouplingUMesh::orientCorrectly2DCells(const double *vec, bool polyOnly)
{
if(getMeshDimension()!=2 || getSpaceDimension()!=3)
throw INTERP_KERNEL::Exception("Invalid mesh to apply orientCorrectly2DCells on it : must be meshDim==2 and spaceDim==3 !");
- int nbOfCells=getNumberOfCells();
- int *conn=_nodal_connec->getPointer();
- const int *connI=_nodal_connec_index->getConstPointer();
- const double *coordsPtr=_coords->getConstPointer();
- bool isModified=false;
+ int nbOfCells(getNumberOfCells()),*conn(_nodal_connec->getPointer());
+ const int *connI(_nodal_connec_index->getConstPointer());
+ const double *coordsPtr(_coords->getConstPointer());
+ bool isModified(false);
for(int i=0;i<nbOfCells;i++)
{
- INTERP_KERNEL::NormalizedCellType type=(INTERP_KERNEL::NormalizedCellType)conn[connI[i]];
+ INTERP_KERNEL::NormalizedCellType type((INTERP_KERNEL::NormalizedCellType)conn[connI[i]]);
if(!polyOnly || (type==INTERP_KERNEL::NORM_POLYGON || type==INTERP_KERNEL::NORM_QPOLYG))
{
- bool isQuadratic(INTERP_KERNEL::CellModel::GetCellModel(type).isQuadratic());
+ const INTERP_KERNEL::CellModel& cm(INTERP_KERNEL::CellModel::GetCellModel(type));
+ bool isQuadratic(cm.isQuadratic());
if(!IsPolygonWellOriented(isQuadratic,vec,conn+connI[i]+1,conn+connI[i+1],coordsPtr))
{
isModified=true;
- if(!isQuadratic)
- {
- std::vector<int> tmp(connI[i+1]-connI[i]-2);
- std::copy(conn+connI[i]+2,conn+connI[i+1],tmp.rbegin());
- std::copy(tmp.begin(),tmp.end(),conn+connI[i]+2);
- }
- else
- {
- int sz(((int)(connI[i+1]-connI[i]-1))/2);
- std::vector<int> tmp0(sz-1),tmp1(sz);
- std::copy(conn+connI[i]+2,conn+connI[i]+1+sz,tmp0.rbegin());
- std::copy(conn+connI[i]+1+sz,conn+connI[i+1],tmp1.rbegin());
- std::copy(tmp0.begin(),tmp0.end(),conn+connI[i]+2);
- std::copy(tmp1.begin(),tmp1.end(),conn+connI[i]+1+sz);
- }
+ cm.changeOrientationOf2D(conn+connI[i]+1,(unsigned int)(connI[i+1]-connI[i]-1));
}
}
}
updateTime();
}
+/*!
+ * This method change the orientation of cells in \a this without any consideration of coordinates. Only connectivity is impacted.
+ *
+ * \sa orientCorrectly2DCells
+ */
+void MEDCouplingUMesh::changeOrientationOfCells()
+{
+ int mdim(getMeshDimension());
+ if(mdim!=2 && mdim!=1)
+ throw INTERP_KERNEL::Exception("Invalid mesh to apply changeOrientationOfCells on it : must be meshDim==2 or meshDim==1 !");
+ int nbOfCells(getNumberOfCells()),*conn(_nodal_connec->getPointer());
+ const int *connI(_nodal_connec_index->getConstPointer());
+ if(mdim==2)
+ {//2D
+ for(int i=0;i<nbOfCells;i++)
+ {
+ INTERP_KERNEL::NormalizedCellType type((INTERP_KERNEL::NormalizedCellType)conn[connI[i]]);
+ const INTERP_KERNEL::CellModel& cm(INTERP_KERNEL::CellModel::GetCellModel(type));
+ cm.changeOrientationOf2D(conn+connI[i]+1,(unsigned int)(connI[i+1]-connI[i]-1));
+ }
+ }
+ else
+ {//1D
+ for(int i=0;i<nbOfCells;i++)
+ {
+ INTERP_KERNEL::NormalizedCellType type((INTERP_KERNEL::NormalizedCellType)conn[connI[i]]);
+ const INTERP_KERNEL::CellModel& cm(INTERP_KERNEL::CellModel::GetCellModel(type));
+ cm.changeOrientationOf1D(conn+connI[i]+1,(unsigned int)(connI[i+1]-connI[i]-1));
+ }
+ }
+}
+
/*!
* Finds incorrectly oriented polyhedral cells, i.e. polyhedrons having correctly
* oriented facets. The normal vector of the facet should point out of the cell.
* \throw If the coordinates array is not set.
* \throw If the nodal connectivity of cells is not defined.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_arePolyhedronsNotCorrectlyOriented "Here is a C++ example".<br>
* \ref py_mcumesh_arePolyhedronsNotCorrectlyOriented "Here is a Python example".
+ * \endif
*/
void MEDCouplingUMesh::arePolyhedronsNotCorrectlyOriented(std::vector<int>& cells) const
{
* \throw If the nodal connectivity of cells is not defined.
* \throw If the reparation fails.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_arePolyhedronsNotCorrectlyOriented "Here is a C++ example".<br>
* \ref py_mcumesh_arePolyhedronsNotCorrectlyOriented "Here is a Python example".
+ * \endif
* \sa MEDCouplingUMesh::findAndCorrectBadOriented3DCells
*/
void MEDCouplingUMesh::orientCorrectlyPolyhedrons()
if(type==INTERP_KERNEL::NORM_POLYHED)
{
try
- {
+ {
if(!IsPolyhedronWellOriented(conn+connI[i]+1,conn+connI[i+1],coordsPtr))
TryToCorrectPolyhedronOrientation(conn+connI[i]+1,conn+connI[i+1],coordsPtr);
- }
+ }
catch(INTERP_KERNEL::Exception& e)
- {
+ {
std::ostringstream oss; oss << "Something wrong in polyhedron #" << i << " : " << e.what();
throw INTERP_KERNEL::Exception(oss.str().c_str());
- }
+ }
}
}
updateTime();
* \throw If the coordinates array is not set.
* \throw If the nodal connectivity of cells is not defined.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_findAndCorrectBadOriented3DExtrudedCells "Here is a C++ example".<br>
* \ref py_mcumesh_findAndCorrectBadOriented3DExtrudedCells "Here is a Python example".
+ * \endif
* \sa MEDCouplingUMesh::findAndCorrectBadOriented3DCells
*/
DataArrayInt *MEDCouplingUMesh::findAndCorrectBadOriented3DExtrudedCells()
{
INTERP_KERNEL::NormalizedCellType type=(INTERP_KERNEL::NormalizedCellType)conn[connI[i]];
switch(type)
- {
+ {
case INTERP_KERNEL::NORM_TETRA4:
{
if(!IsTetra4WellOriented(conn+connI[i]+1,conn+connI[i+1],coordsPtr))
}
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::orientCorrectly3DCells : Your mesh contains type of cell not supported yet ! send mail to anthony.geay@cea.fr to add it !");
- }
+ }
}
updateTime();
return ret.retn();
{
INTERP_KERNEL::NormalizedCellType t=(INTERP_KERNEL::NormalizedCellType)*conn;
switch(t)
- {
- case INTERP_KERNEL::NORM_TRI3:
- {
- FillInCompact3DMode(spaceDim,3,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::triEdgeRatio(tmp);
- break;
- }
- case INTERP_KERNEL::NORM_QUAD4:
- {
- FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::quadEdgeRatio(tmp);
- break;
- }
- case INTERP_KERNEL::NORM_TETRA4:
- {
- FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::tetraEdgeRatio(tmp);
- break;
- }
+ {
+ case INTERP_KERNEL::NORM_TRI3:
+ {
+ FillInCompact3DMode(spaceDim,3,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::triEdgeRatio(tmp);
+ break;
+ }
+ case INTERP_KERNEL::NORM_QUAD4:
+ {
+ FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::quadEdgeRatio(tmp);
+ break;
+ }
+ case INTERP_KERNEL::NORM_TETRA4:
+ {
+ FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::tetraEdgeRatio(tmp);
+ break;
+ }
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::getEdgeRatioField : A cell with not manged type (NORM_TRI3, NORM_QUAD4 and NORM_TETRA4) has been detected !");
- }
+ }
conn+=connI[i+1]-connI[i];
}
ret->setName("EdgeRatio");
{
INTERP_KERNEL::NormalizedCellType t=(INTERP_KERNEL::NormalizedCellType)*conn;
switch(t)
- {
- case INTERP_KERNEL::NORM_TRI3:
- {
- FillInCompact3DMode(spaceDim,3,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::triAspectRatio(tmp);
- break;
- }
- case INTERP_KERNEL::NORM_QUAD4:
- {
- FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::quadAspectRatio(tmp);
- break;
- }
- case INTERP_KERNEL::NORM_TETRA4:
- {
- FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::tetraAspectRatio(tmp);
- break;
- }
+ {
+ case INTERP_KERNEL::NORM_TRI3:
+ {
+ FillInCompact3DMode(spaceDim,3,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::triAspectRatio(tmp);
+ break;
+ }
+ case INTERP_KERNEL::NORM_QUAD4:
+ {
+ FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::quadAspectRatio(tmp);
+ break;
+ }
+ case INTERP_KERNEL::NORM_TETRA4:
+ {
+ FillInCompact3DMode(spaceDim,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::tetraAspectRatio(tmp);
+ break;
+ }
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::getAspectRatioField : A cell with not manged type (NORM_TRI3, NORM_QUAD4 and NORM_TETRA4) has been detected !");
- }
+ }
conn+=connI[i+1]-connI[i];
}
ret->setName("AspectRatio");
{
INTERP_KERNEL::NormalizedCellType t=(INTERP_KERNEL::NormalizedCellType)*conn;
switch(t)
- {
- case INTERP_KERNEL::NORM_QUAD4:
- {
- FillInCompact3DMode(3,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::quadWarp(tmp);
- break;
- }
+ {
+ case INTERP_KERNEL::NORM_QUAD4:
+ {
+ FillInCompact3DMode(3,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::quadWarp(tmp);
+ break;
+ }
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::getWarpField : A cell with not manged type (NORM_QUAD4) has been detected !");
- }
+ }
conn+=connI[i+1]-connI[i];
}
ret->setName("Warp");
{
INTERP_KERNEL::NormalizedCellType t=(INTERP_KERNEL::NormalizedCellType)*conn;
switch(t)
- {
- case INTERP_KERNEL::NORM_QUAD4:
- {
- FillInCompact3DMode(3,4,conn+1,coo,tmp);
- *pt=INTERP_KERNEL::quadSkew(tmp);
- break;
- }
+ {
+ case INTERP_KERNEL::NORM_QUAD4:
+ {
+ FillInCompact3DMode(3,4,conn+1,coo,tmp);
+ *pt=INTERP_KERNEL::quadSkew(tmp);
+ break;
+ }
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::getSkewField : A cell with not manged type (NORM_QUAD4) has been detected !");
- }
+ }
conn+=connI[i+1]-connI[i];
}
ret->setName("Skew");
DataArrayDouble *MEDCouplingUMesh::getBoundingBoxForBBTree(double arcDetEps) const
{
int mDim(getMeshDimension()),sDim(getSpaceDimension());
- if(mDim!=2 || sDim!=2)
+ if((mDim==3 && sDim==3) || (mDim==2 && sDim==3) || (mDim==1 && sDim==1) || ( mDim==1 && sDim==3)) // Compute refined boundary box for quadratic elements only in 2D.
return getBoundingBoxForBBTreeFast();
- else
+ if((mDim==2 && sDim==2) || (mDim==1 && sDim==2))
{
bool presenceOfQuadratic(false);
for(std::set<INTERP_KERNEL::NormalizedCellType>::const_iterator it=_types.begin();it!=_types.end();it++)
if(cm.isQuadratic())
presenceOfQuadratic=true;
}
- if(presenceOfQuadratic)
+ if(!presenceOfQuadratic)
+ return getBoundingBoxForBBTreeFast();
+ if(mDim==2 && sDim==2)
return getBoundingBoxForBBTree2DQuadratic(arcDetEps);
else
- return getBoundingBoxForBBTreeFast();
+ return getBoundingBoxForBBTree1DQuadratic(arcDetEps);
}
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::getBoundingBoxForBBTree : Managed dimensions are (mDim=1,sDim=1), (mDim=1,sDim=2), (mDim=1,sDim=3), (mDim=2,sDim=2), (mDim=2,sDim=3) and (mDim=3,sDim=3) !");
}
/*!
}
/*!
- * This method aggregate the bbox regarding foreach 2D cell in \a this the whole shape. So this method is particulary useful for 2D meshes having quadratic cells
- * because for this type of cells getBoundingBoxForBBTreeFast method may return invalid bounding boxes.
+ * This method aggregates the bbox of each 2D cell in \a this considering the whole shape. This method is particularly
+ * useful for 2D meshes having quadratic cells
+ * because for this type of cells getBoundingBoxForBBTreeFast method may return invalid bounding boxes (since it just considers
+ * the two extremities of the arc of circle).
*
* \param [in] arcDetEps - a parameter specifying in case of 2D quadratic polygon cell the detection limit between linear and arc circle. (By default 1e-12)
* \return DataArrayDouble * - newly created object (to be managed by the caller) \a this number of cells tuples and 2*spacedim components.
* \throw If \a this is not fully defined.
* \throw If \a this is not a mesh with meshDimension equal to 2.
* \throw If \a this is not a mesh with spaceDimension equal to 2.
+ * \sa MEDCouplingUMesh::getBoundingBoxForBBTree1DQuadratic
*/
DataArrayDouble *MEDCouplingUMesh::getBoundingBoxForBBTree2DQuadratic(double arcDetEps) const
{
checkFullyDefined();
- int spaceDim(getSpaceDimension()),mDim(getMeshDimension()),nbOfCells(getNumberOfCells()),nbOfNodes(getNumberOfNodes());
- if(mDim!=2 || spaceDim!=2)
+ int spaceDim(getSpaceDimension()),mDim(getMeshDimension()),nbOfCells(getNumberOfCells());
+ if(spaceDim!=2 || mDim!=2)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::getBoundingBoxForBBTree2DQuadratic : This method should be applied on mesh with mesh dimension equal to 2 and space dimension also equal to 2!");
MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> ret(DataArrayDouble::New()); ret->alloc(nbOfCells,2*spaceDim);
double *bbox(ret->getPointer());
{
const INTERP_KERNEL::CellModel& cm(INTERP_KERNEL::CellModel::GetCellModel((INTERP_KERNEL::NormalizedCellType)conn[*connI]));
int sz(connI[1]-connI[0]-1);
- INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=1e-12;
+ INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=arcDetEps;
std::vector<INTERP_KERNEL::Node *> nodes(sz);
INTERP_KERNEL::QuadraticPolygon *pol(0);
for(int j=0;j<sz;j++)
pol=INTERP_KERNEL::QuadraticPolygon::BuildLinearPolygon(nodes);
else
pol=INTERP_KERNEL::QuadraticPolygon::BuildArcCirclePolygon(nodes);
- INTERP_KERNEL::Bounds b; pol->fillBounds(b); delete pol;
+ INTERP_KERNEL::Bounds b; b.prepareForAggregation(); pol->fillBounds(b); delete pol;
bbox[0]=b.getXMin(); bbox[1]=b.getXMax(); bbox[2]=b.getYMin(); bbox[3]=b.getYMax();
}
return ret.retn();
}
+/*!
+ * This method aggregates the bbox of each 1D cell in \a this considering the whole shape. This method is particularly
+ * useful for 2D meshes having quadratic cells
+ * because for this type of cells getBoundingBoxForBBTreeFast method may return invalid bounding boxes (since it just considers
+ * the two extremities of the arc of circle).
+ *
+ * \param [in] arcDetEps - a parameter specifying in case of 2D quadratic polygon cell the detection limit between linear and arc circle. (By default 1e-12)
+ * \return DataArrayDouble * - newly created object (to be managed by the caller) \a this number of cells tuples and 2*spacedim components.
+ * \throw If \a this is not fully defined.
+ * \throw If \a this is not a mesh with meshDimension equal to 1.
+ * \throw If \a this is not a mesh with spaceDimension equal to 2.
+ * \sa MEDCouplingUMesh::getBoundingBoxForBBTree2DQuadratic
+ */
+DataArrayDouble *MEDCouplingUMesh::getBoundingBoxForBBTree1DQuadratic(double arcDetEps) const
+{
+ checkFullyDefined();
+ int spaceDim(getSpaceDimension()),mDim(getMeshDimension()),nbOfCells(getNumberOfCells());
+ if(spaceDim!=2 || mDim!=1)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::getBoundingBoxForBBTree1DQuadratic : This method should be applied on mesh with mesh dimension equal to 1 and space dimension also equal to 2!");
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> ret(DataArrayDouble::New()); ret->alloc(nbOfCells,2*spaceDim);
+ double *bbox(ret->getPointer());
+ const double *coords(_coords->getConstPointer());
+ const int *conn(_nodal_connec->getConstPointer()),*connI(_nodal_connec_index->getConstPointer());
+ for(int i=0;i<nbOfCells;i++,bbox+=4,connI++)
+ {
+ const INTERP_KERNEL::CellModel& cm(INTERP_KERNEL::CellModel::GetCellModel((INTERP_KERNEL::NormalizedCellType)conn[*connI]));
+ int sz(connI[1]-connI[0]-1);
+ INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=arcDetEps;
+ std::vector<INTERP_KERNEL::Node *> nodes(sz);
+ INTERP_KERNEL::Edge *edge(0);
+ for(int j=0;j<sz;j++)
+ {
+ int nodeId(conn[*connI+1+j]);
+ nodes[j]=new INTERP_KERNEL::Node(coords[nodeId*2],coords[nodeId*2+1]);
+ }
+ if(!cm.isQuadratic())
+ edge=INTERP_KERNEL::QuadraticPolygon::BuildLinearEdge(nodes);
+ else
+ edge=INTERP_KERNEL::QuadraticPolygon::BuildArcCircleEdge(nodes);
+ const INTERP_KERNEL::Bounds& b(edge->getBounds());
+ bbox[0]=b.getXMin(); bbox[1]=b.getXMax(); bbox[2]=b.getYMin(); bbox[3]=b.getYMax(); edge->decrRef();
+ }
+ return ret.retn();
+}
+
/// @cond INTERNAL
namespace ParaMEDMEMImpl
MEDCoupling1GTUMesh *MEDCouplingUMesh::convertIntoSingleGeoTypeMesh() const
{
checkConnectivityFullyDefined();
- if(_types.size()!=1)
+ if(_types.size()!=1)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertIntoSingleGeoTypeMesh : current mesh does not contain exactly one geometric type !");
INTERP_KERNEL::NormalizedCellType typ=*_types.begin();
MEDCouplingAutoRefCountObjectPtr<MEDCoupling1GTUMesh> ret=MEDCoupling1GTUMesh::New(getName(),typ);
DataArrayInt *MEDCouplingUMesh::convertNodalConnectivityToStaticGeoTypeMesh() const
{
checkConnectivityFullyDefined();
- if(_types.size()!=1)
+ if(_types.size()!=1)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::convertNodalConnectivityToStaticGeoTypeMesh : current mesh does not contain exactly one geometric type !");
INTERP_KERNEL::NormalizedCellType typ=*_types.begin();
const INTERP_KERNEL::CellModel& cm=INTERP_KERNEL::CellModel::GetCellModel(typ);
*/
MEDCouplingUMesh *MEDCouplingUMesh::AggregateSortedByTypeMeshesOnSameCoords(const std::vector<const MEDCouplingUMesh *>& ms,
DataArrayInt *&szOfCellGrpOfSameType,
- DataArrayInt *&idInMsOfCellGrpOfSameType) throw(INTERP_KERNEL::Exception)
+ DataArrayInt *&idInMsOfCellGrpOfSameType)
{
std::vector<const MEDCouplingUMesh *> ms2;
for(std::vector<const MEDCouplingUMesh *>::const_iterator it=ms.begin();it!=ms.end();it++)
* \throw If the coordinates array is not set.
* \throw If the nodal connectivity of cells is not defined.
*
+ * \if ENABLE_EXAMPLES
* \ref cpp_mcumesh_getPartBarycenterAndOwner "Here is a C++ example".<br>
* \ref py_mcumesh_getPartBarycenterAndOwner "Here is a Python example".
+ * \endif
*/
DataArrayDouble *MEDCouplingUMesh::getPartBarycenterAndOwner(const int *begin, const int *end) const
{
* \throw If the coordinates array is not set in none of the meshes.
* \throw If \a a[ *i* ]->getMeshDimension() < 0.
* \throw If the meshes in \a a are of different dimension (getMeshDimension()).
-*/
+ */
MEDCouplingUMesh *MEDCouplingUMesh::MergeUMeshes(std::vector<const MEDCouplingUMesh *>& a)
{
std::size_t sz=a.size();
ret.push_back(cm.getExtrudedType());
int deltaz=isQuad?2*nbOfNodesPerLev:nbOfNodesPerLev;
switch(flatType)
- {
+ {
case INTERP_KERNEL::NORM_POINT1:
{
ret.push_back(connBg[1]);
case INTERP_KERNEL::NORM_TRI6:
{
int conn[15]={connBg[1],connBg[2],connBg[3],connBg[1]+deltaz,connBg[2]+deltaz,connBg[3]+deltaz,connBg[4],connBg[5],connBg[6],connBg[4]+deltaz,connBg[5]+deltaz,connBg[6]+deltaz,
- connBg[1]+nbOfNodesPerLev,connBg[2]+nbOfNodesPerLev,connBg[3]+nbOfNodesPerLev};
+ connBg[1]+nbOfNodesPerLev,connBg[2]+nbOfNodesPerLev,connBg[3]+nbOfNodesPerLev};
ret.insert(ret.end(),conn,conn+15);
break;
}
}
default:
throw INTERP_KERNEL::Exception("A flat type has been detected that has not its extruded representation !");
- }
+ }
}
/*!
}
}
-/*!
- * This method makes the assumption spacedimension == meshdimension == 2.
- * This method works only for linear cells.
- *
- * \return a newly allocated array containing the connectivity of a polygon type enum included (NORM_POLYGON in pos#0)
- */
-DataArrayInt *MEDCouplingUMesh::buildUnionOf2DMesh() const
+DataArrayInt *MEDCouplingUMesh::buildUnionOf2DMeshLinear(const MEDCouplingUMesh *skin, const DataArrayInt *n2o) const
{
- if(getMeshDimension()!=2 || getSpaceDimension()!=2)
- throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMesh : meshdimension, spacedimension must be equal to 2 !");
- MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> m=computeSkin();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> o2n=m->zipCoordsTraducer();
- int nbOfNodesExpected=m->getNumberOfNodes();
- if(m->getNumberOfCells()!=nbOfNodesExpected)
- throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMesh : the mesh 2D in input appears to be not in a single part or a quadratic 2D mesh !");
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> n2o=o2n->invertArrayO2N2N2O(m->getNumberOfNodes());
- const int *n2oPtr=n2o->getConstPointer();
+ int nbOfNodesExpected(skin->getNumberOfNodes());
+ const int *n2oPtr(n2o->getConstPointer());
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> revNodal(DataArrayInt::New()),revNodalI(DataArrayInt::New());
- m->getReverseNodalConnectivity(revNodal,revNodalI);
- const int *revNodalPtr=revNodal->getConstPointer(),*revNodalIPtr=revNodalI->getConstPointer();
- const int *nodalPtr=m->getNodalConnectivity()->getConstPointer();
- const int *nodalIPtr=m->getNodalConnectivityIndex()->getConstPointer();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret=DataArrayInt::New(); ret->alloc(nbOfNodesExpected+1,1);
- int *work=ret->getPointer(); *work++=INTERP_KERNEL::NORM_POLYGON;
+ skin->getReverseNodalConnectivity(revNodal,revNodalI);
+ const int *revNodalPtr(revNodal->getConstPointer()),*revNodalIPtr(revNodalI->getConstPointer());
+ const int *nodalPtr(skin->getNodalConnectivity()->getConstPointer());
+ const int *nodalIPtr(skin->getNodalConnectivityIndex()->getConstPointer());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret(DataArrayInt::New()); ret->alloc(nbOfNodesExpected+1,1);
+ int *work(ret->getPointer()); *work++=INTERP_KERNEL::NORM_POLYGON;
if(nbOfNodesExpected<1)
return ret.retn();
- int prevCell=0;
- int prevNode=nodalPtr[nodalIPtr[0]+1];
+ int prevCell(0),prevNode(nodalPtr[nodalIPtr[0]+1]);
*work++=n2oPtr[prevNode];
for(int i=1;i<nbOfNodesExpected;i++)
{
conn.erase(prevNode);
if(conn.size()==1)
{
- int curNode=*(conn.begin());
+ int curNode(*(conn.begin()));
*work++=n2oPtr[curNode];
std::set<int> shar(revNodalPtr+revNodalIPtr[curNode],revNodalPtr+revNodalIPtr[curNode+1]);
shar.erase(prevCell);
prevNode=curNode;
}
else
- throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMesh : presence of unexpected 2 !");
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMeshLinear : presence of unexpected 2 !");
+ }
+ else
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMeshLinear : presence of unexpected 1 !");
+ }
+ else
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMeshLinear : presence of unexpected cell !");
+ }
+ return ret.retn();
+}
+
+DataArrayInt *MEDCouplingUMesh::buildUnionOf2DMeshQuadratic(const MEDCouplingUMesh *skin, const DataArrayInt *n2o) const
+{
+ int nbOfNodesExpected(skin->getNumberOfNodes());
+ int nbOfTurn(nbOfNodesExpected/2);
+ const int *n2oPtr(n2o->getConstPointer());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> revNodal(DataArrayInt::New()),revNodalI(DataArrayInt::New());
+ skin->getReverseNodalConnectivity(revNodal,revNodalI);
+ const int *revNodalPtr(revNodal->getConstPointer()),*revNodalIPtr(revNodalI->getConstPointer());
+ const int *nodalPtr(skin->getNodalConnectivity()->getConstPointer());
+ const int *nodalIPtr(skin->getNodalConnectivityIndex()->getConstPointer());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret(DataArrayInt::New()); ret->alloc(nbOfNodesExpected+1,1);
+ int *work(ret->getPointer()); *work++=INTERP_KERNEL::NORM_QPOLYG;
+ if(nbOfNodesExpected<1)
+ return ret.retn();
+ int prevCell(0),prevNode(nodalPtr[nodalIPtr[0]+1]);
+ *work=n2oPtr[prevNode]; work[nbOfTurn]=n2oPtr[nodalPtr[nodalIPtr[0]+3]]; work++;
+ for(int i=1;i<nbOfTurn;i++)
+ {
+ if(nodalIPtr[prevCell+1]-nodalIPtr[prevCell]==4)
+ {
+ std::set<int> conn(nodalPtr+nodalIPtr[prevCell]+1,nodalPtr+nodalIPtr[prevCell]+3);
+ conn.erase(prevNode);
+ if(conn.size()==1)
+ {
+ int curNode(*(conn.begin()));
+ *work=n2oPtr[curNode];
+ std::set<int> shar(revNodalPtr+revNodalIPtr[curNode],revNodalPtr+revNodalIPtr[curNode+1]);
+ shar.erase(prevCell);
+ if(shar.size()==1)
+ {
+ int curCell(*(shar.begin()));
+ work[nbOfTurn]=n2oPtr[nodalPtr[nodalIPtr[curCell]+3]];
+ prevCell=curCell;
+ prevNode=curNode;
+ work++;
+ }
+ else
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMeshQuadratic : presence of unexpected 2 !");
}
else
- throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMesh : presence of unexpected 1 !");
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMeshQuadratic : presence of unexpected 1 !");
}
else
- throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMesh : presence of unexpected cell !");
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMeshQuadratic : presence of unexpected cell !");
}
return ret.retn();
}
+/*!
+ * This method makes the assumption spacedimension == meshdimension == 2.
+ * This method works only for linear cells.
+ *
+ * \return a newly allocated array containing the connectivity of a polygon type enum included (NORM_POLYGON in pos#0)
+ */
+DataArrayInt *MEDCouplingUMesh::buildUnionOf2DMesh() const
+{
+ if(getMeshDimension()!=2 || getSpaceDimension()!=2)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMesh : meshdimension, spacedimension must be equal to 2 !");
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> skin(computeSkin());
+ int oldNbOfNodes(skin->getNumberOfNodes());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> o2n(skin->zipCoordsTraducer());
+ int nbOfNodesExpected(skin->getNumberOfNodes());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> n2o(o2n->invertArrayO2N2N2O(oldNbOfNodes));
+ int nbCells(skin->getNumberOfCells());
+ if(nbCells==nbOfNodesExpected)
+ return buildUnionOf2DMeshLinear(skin,n2o);
+ else if(2*nbCells==nbOfNodesExpected)
+ return buildUnionOf2DMeshQuadratic(skin,n2o);
+ else
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildUnionOf2DMesh : the mesh 2D in input appears to be not in a single part of a 2D mesh !");
+}
+
/*!
* This method makes the assumption spacedimension == meshdimension == 3.
* This method works only for linear cells.
w4=std::copy(c.begin(),c.end(),w4);
}
}
- types->transformWithIndArr(PARAMEDMEM2VTKTYPETRADUCER,PARAMEDMEM2VTKTYPETRADUCER+INTERP_KERNEL::NORM_MAXTYPE);
+ types->transformWithIndArr(PARAMEDMEM2VTKTYPETRADUCER,PARAMEDMEM2VTKTYPETRADUCER+INTERP_KERNEL::NORM_MAXTYPE+1);
types->writeVTK(ofs,8,"UInt8","types",byteData);
offsets->writeVTK(ofs,8,"Int32","offsets",byteData);
if(szFaceOffsets!=0)
return std::string("UnstructuredGrid");
}
+std::string MEDCouplingUMesh::getVTKFileExtension() const
+{
+ return std::string("vtu");
+}
+
/*!
* Partitions the first given 2D mesh using the second given 2D mesh as a tool, and
* returns a result mesh constituted by polygons.
* The meshes should be in 2D space. In
* addition, returns two arrays mapping cells of the result mesh to cells of the input
* meshes.
- * \param [in] m1 - the first input mesh which is a partitioned object.
- * \param [in] m2 - the second input mesh which is a partition tool.
+ * \param [in] m1 - the first input mesh which is a partitioned object. The mesh must be so that each point in the space covered by \a m1
+ * must be covered exactly by one entity, \b no \b more. If it is not the case, some tools are available to heal the mesh (conformize2D, mergeNodes)
+ * \param [in] m2 - the second input mesh which is a partition tool. The mesh must be so that each point in the space covered by \a m2
+ * must be covered exactly by one entity, \b no \b more. If it is not the case, some tools are available to heal the mesh (conformize2D, mergeNodes)
* \param [in] eps - precision used to detect coincident mesh entities.
* \param [out] cellNb1 - a new instance of DataArrayInt holding for each result
* cell an id of the cell of \a m1 it comes from. The caller is to delete
* \throw If the coordinates array is not set in any of the meshes.
* \throw If the nodal connectivity of cells is not defined in any of the meshes.
* \throw If any of the meshes is not a 2D mesh in 2D space.
+ *
+ * \sa conformize2D, mergeNodes
*/
MEDCouplingUMesh *MEDCouplingUMesh::Intersect2DMeshes(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2,
double eps, DataArrayInt *&cellNb1, DataArrayInt *&cellNb2)
{
+ if(!m1 || !m2)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::Intersect2DMeshes : input meshes must be not NULL !");
m1->checkFullyDefined();
m2->checkFullyDefined();
if(m1->getMeshDimension()!=2 || m1->getSpaceDimension()!=2 || m2->getMeshDimension()!=2 || m2->getSpaceDimension()!=2)
MEDCouplingUMesh *m1Desc=0,*m2Desc=0; // descending connec. meshes
DataArrayInt *desc1=0,*descIndx1=0,*revDesc1=0,*revDescIndx1=0,*desc2=0,*descIndx2=0,*revDesc2=0,*revDescIndx2=0;
std::vector<double> addCoo,addCoordsQuadratic; // coordinates of newly created nodes
- INTERP_KERNEL::QUADRATIC_PLANAR::_precision=eps;
- INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=eps;
IntersectDescending2DMeshes(m1,m2,eps,intersectEdge1,colinear2, subDiv2,
- m1Desc,desc1,descIndx1,revDesc1,revDescIndx1,
+ m1Desc,desc1,descIndx1,revDesc1,revDescIndx1,
addCoo, m2Desc,desc2,descIndx2,revDesc2,revDescIndx2);
revDesc1->decrRef(); revDescIndx1->decrRef(); revDesc2->decrRef(); revDescIndx2->decrRef();
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> dd1(desc1),dd2(descIndx1),dd3(desc2),dd4(descIndx2);
/* outputs -> */addCoordsQuadratic,cr,crI,cNb1,cNb2);
// Step 4: Prepare final result:
- MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> addCooDa=DataArrayDouble::New();
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> addCooDa(DataArrayDouble::New());
addCooDa->alloc((int)(addCoo.size())/2,2);
std::copy(addCoo.begin(),addCoo.end(),addCooDa->getPointer());
- MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> addCoordsQuadraticDa=DataArrayDouble::New();
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> addCoordsQuadraticDa(DataArrayDouble::New());
addCoordsQuadraticDa->alloc((int)(addCoordsQuadratic.size())/2,2);
std::copy(addCoordsQuadratic.begin(),addCoordsQuadratic.end(),addCoordsQuadraticDa->getPointer());
std::vector<const DataArrayDouble *> coordss(4);
coordss[0]=m1->getCoords(); coordss[1]=m2->getCoords(); coordss[2]=addCooDa; coordss[3]=addCoordsQuadraticDa;
- MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> coo=DataArrayDouble::Aggregate(coordss);
- MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> ret=MEDCouplingUMesh::New("Intersect2D",2);
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> conn=DataArrayInt::New(); conn->alloc((int)cr.size(),1); std::copy(cr.begin(),cr.end(),conn->getPointer());
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> connI=DataArrayInt::New(); connI->alloc((int)crI.size(),1); std::copy(crI.begin(),crI.end(),connI->getPointer());
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> c1=DataArrayInt::New(); c1->alloc((int)cNb1.size(),1); std::copy(cNb1.begin(),cNb1.end(),c1->getPointer());
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> c2=DataArrayInt::New(); c2->alloc((int)cNb2.size(),1); std::copy(cNb2.begin(),cNb2.end(),c2->getPointer());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> coo(DataArrayDouble::Aggregate(coordss));
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> ret(MEDCouplingUMesh::New("Intersect2D",2));
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> conn(DataArrayInt::New()); conn->alloc((int)cr.size(),1); std::copy(cr.begin(),cr.end(),conn->getPointer());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> connI(DataArrayInt::New()); connI->alloc((int)crI.size(),1); std::copy(crI.begin(),crI.end(),connI->getPointer());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> c1(DataArrayInt::New()); c1->alloc((int)cNb1.size(),1); std::copy(cNb1.begin(),cNb1.end(),c1->getPointer());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> c2(DataArrayInt::New()); c2->alloc((int)cNb2.size(),1); std::copy(cNb2.begin(),cNb2.end(),c2->getPointer());
ret->setConnectivity(conn,connI,true);
ret->setCoords(coo);
cellNb1=c1.retn(); cellNb2=c2.retn();
return ret.retn();
}
+/// @cond INTERNAL
-/**
- * Private. Third step of the partitioning algorithm (Intersect2DMeshes): reconstruct full 2D cells from the
- * (newly created) nodes corresponding to the edge intersections.
- * Output params:
- * @param[out] cr, crI connectivity of the resulting mesh
- * @param[out] cNb1, cNb2 correspondance arrays giving for the merged mesh the initial cells IDs in m1 / m2
- * TODO: describe input parameters
- */
-void MEDCouplingUMesh::BuildIntersecting2DCellsFromEdges(double eps, const MEDCouplingUMesh *m1, const int *desc1, const int *descIndx1,
- const std::vector<std::vector<int> >& intesctEdges1, const std::vector< std::vector<int> >& colinear2,
- const MEDCouplingUMesh *m2, const int *desc2, const int *descIndx2, const std::vector<std::vector<int> >& intesctEdges2,
- const std::vector<double>& addCoords,
- std::vector<double>& addCoordsQuadratic, std::vector<int>& cr, std::vector<int>& crI, std::vector<int>& cNb1, std::vector<int>& cNb2)
+bool IsColinearOfACellOf(const std::vector< std::vector<int> >& intersectEdge1, const std::vector<int>& candidates, int start, int stop, int& retVal)
{
- static const int SPACEDIM=2;
- const double *coo1=m1->getCoords()->getConstPointer();
- const int *conn1=m1->getNodalConnectivity()->getConstPointer();
- const int *connI1=m1->getNodalConnectivityIndex()->getConstPointer();
- int offset1=m1->getNumberOfNodes();
- const double *coo2=m2->getCoords()->getConstPointer();
- const int *conn2=m2->getNodalConnectivity()->getConstPointer();
- const int *connI2=m2->getNodalConnectivityIndex()->getConstPointer();
- int offset2=offset1+m2->getNumberOfNodes();
- int offset3=offset2+((int)addCoords.size())/2;
- MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> bbox1Arr(m1->getBoundingBoxForBBTree()),bbox2Arr(m2->getBoundingBoxForBBTree());
- const double *bbox1(bbox1Arr->begin()),*bbox2(bbox2Arr->begin());
- // Here a BBTree on 2D-cells, not on segments:
- BBTree<SPACEDIM,int> myTree(bbox2,0,0,m2->getNumberOfCells(),eps);
- int ncell1=m1->getNumberOfCells();
- crI.push_back(0);
- for(int i=0;i<ncell1;i++)
- {
- std::vector<int> candidates2;
- myTree.getIntersectingElems(bbox1+i*2*SPACEDIM,candidates2);
- std::map<INTERP_KERNEL::Node *,int> mapp;
- std::map<int,INTERP_KERNEL::Node *> mappRev;
- INTERP_KERNEL::QuadraticPolygon pol1;
- INTERP_KERNEL::NormalizedCellType typ=(INTERP_KERNEL::NormalizedCellType)conn1[connI1[i]];
- const INTERP_KERNEL::CellModel& cm=INTERP_KERNEL::CellModel::GetCellModel(typ);
- // Populate mapp and mappRev with nodes from the current cell (i) from mesh1 - this also builds the Node* objects:
- MEDCouplingUMeshBuildQPFromMesh3(coo1,offset1,coo2,offset2,addCoords,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,/* output */mapp,mappRev);
- // pol1 is the full cell from mesh2, in QP format, with all the additional intersecting nodes.
- pol1.buildFromCrudeDataArray(mappRev,cm.isQuadratic(),conn1+connI1[i]+1,coo1,
- desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1);
- //
- std::set<INTERP_KERNEL::Edge *> edges1;// store all edges of pol1 that are NOT consumed by intersect cells. If any after iteration over candidates2 -> a part of pol1 should appear in result
- std::set<INTERP_KERNEL::Edge *> edgesBoundary2;// store all edges that are on boundary of (pol2 intersect pol1) minus edges on pol1.
- INTERP_KERNEL::IteratorOnComposedEdge it1(&pol1);
- for(it1.first();!it1.finished();it1.next())
- edges1.insert(it1.current()->getPtr());
- //
- std::map<int,std::vector<INTERP_KERNEL::ElementaryEdge *> > edgesIn2ForShare; // common edges
- std::vector<INTERP_KERNEL::QuadraticPolygon> pol2s(candidates2.size());
- int ii=0;
- for(std::vector<int>::const_iterator it2=candidates2.begin();it2!=candidates2.end();it2++,ii++)
- {
- INTERP_KERNEL::NormalizedCellType typ2=(INTERP_KERNEL::NormalizedCellType)conn2[connI2[*it2]];
- const INTERP_KERNEL::CellModel& cm2=INTERP_KERNEL::CellModel::GetCellModel(typ2);
- // Complete mapping with elements coming from the current cell it2 in mesh2:
- MEDCouplingUMeshBuildQPFromMesh3(coo1,offset1,coo2,offset2,addCoords,desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,/* output */mapp,mappRev);
- // pol2 is the new QP in the final merged result.
- pol2s[ii].buildFromCrudeDataArray2(mappRev,cm2.isQuadratic(),conn2+connI2[*it2]+1,coo2,desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,
- pol1,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,colinear2, /* output */ edgesIn2ForShare);
- }
- ii=0;
- for(std::vector<int>::const_iterator it2=candidates2.begin();it2!=candidates2.end();it2++,ii++)
- {
- pol1.initLocationsWithOther(pol2s[ii]);
- pol2s[ii].updateLocOfEdgeFromCrudeDataArray2(desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,pol1,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,colinear2);
- //MEDCouplingUMeshAssignOnLoc(pol1,pol2,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,colinear2);
- pol1.buildPartitionsAbs(pol2s[ii],edges1,edgesBoundary2,mapp,i,*it2,offset3,addCoordsQuadratic,cr,crI,cNb1,cNb2);
- }
- // Deals with remaining (non-consumed) edges from m1: these are the edges that were never touched
- // by m2 but that we still want to keep in the final result.
- if(!edges1.empty())
- {
- try
+ if(candidates.empty())
+ return false;
+ for(std::vector<int>::const_iterator it=candidates.begin();it!=candidates.end();it++)
+ {
+ const std::vector<int>& pool(intersectEdge1[*it]);
+ int tmp[2]; tmp[0]=start; tmp[1]=stop;
+ if(std::search(pool.begin(),pool.end(),tmp,tmp+2)!=pool.end())
+ {
+ retVal=*it+1;
+ return true;
+ }
+ tmp[0]=stop; tmp[1]=start;
+ if(std::search(pool.begin(),pool.end(),tmp,tmp+2)!=pool.end())
+ {
+ retVal=-*it-1;
+ return true;
+ }
+ }
+ return false;
+}
+
+MEDCouplingUMesh *BuildMesh1DCutFrom(const MEDCouplingUMesh *mesh1D, const std::vector< std::vector<int> >& intersectEdge2, const DataArrayDouble *coords1, const std::vector<double>& addCoo, const std::map<int,int>& mergedNodes, const std::vector< std::vector<int> >& colinear2, const std::vector< std::vector<int> >& intersectEdge1,
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt>& idsInRetColinear, MEDCouplingAutoRefCountObjectPtr<DataArrayInt>& idsInMesh1DForIdsInRetColinear)
+{
+ idsInRetColinear=DataArrayInt::New(); idsInRetColinear->alloc(0,1);
+ idsInMesh1DForIdsInRetColinear=DataArrayInt::New(); idsInMesh1DForIdsInRetColinear->alloc(0,1);
+ int nCells(mesh1D->getNumberOfCells());
+ if(nCells!=(int)intersectEdge2.size())
+ throw INTERP_KERNEL::Exception("BuildMesh1DCutFrom : internal error # 1 !");
+ const DataArrayDouble *coo2(mesh1D->getCoords());
+ const int *c(mesh1D->getNodalConnectivity()->begin()),*ci(mesh1D->getNodalConnectivityIndex()->begin());
+ const double *coo2Ptr(coo2->begin());
+ int offset1(coords1->getNumberOfTuples());
+ int offset2(offset1+coo2->getNumberOfTuples());
+ int offset3(offset2+addCoo.size()/2);
+ std::vector<double> addCooQuad;
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> cOut(DataArrayInt::New()),ciOut(DataArrayInt::New()); cOut->alloc(0,1); ciOut->alloc(1,1); ciOut->setIJ(0,0,0);
+ int tmp[4],cicnt(0),kk(0);
+ for(int i=0;i<nCells;i++)
+ {
+ std::map<MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node>,int> m;
+ INTERP_KERNEL::Edge *e(MEDCouplingUMeshBuildQPFromEdge2((INTERP_KERNEL::NormalizedCellType)c[ci[i]],c+ci[i]+1,coo2Ptr,m));
+ const std::vector<int>& subEdges(intersectEdge2[i]);
+ int nbSubEdge(subEdges.size()/2);
+ for(int j=0;j<nbSubEdge;j++,kk++)
+ {
+ MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node> n1(MEDCouplingUMeshBuildQPNode(subEdges[2*j],coords1->begin(),offset1,coo2Ptr,offset2,addCoo)),n2(MEDCouplingUMeshBuildQPNode(subEdges[2*j+1],coords1->begin(),offset1,coo2Ptr,offset2,addCoo));
+ MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> e2(e->buildEdgeLyingOnMe(n1,n2));
+ INTERP_KERNEL::Edge *e2Ptr(e2);
+ std::map<int,int>::const_iterator itm;
+ if(dynamic_cast<INTERP_KERNEL::EdgeArcCircle *>(e2Ptr))
{
- INTERP_KERNEL::QuadraticPolygon::ComputeResidual(pol1,edges1,edgesBoundary2,mapp,offset3,i,addCoordsQuadratic,cr,crI,cNb1,cNb2);
+ tmp[0]=INTERP_KERNEL::NORM_SEG3;
+ itm=mergedNodes.find(subEdges[2*j]);
+ tmp[1]=itm!=mergedNodes.end()?(*itm).second:subEdges[2*j];
+ itm=mergedNodes.find(subEdges[2*j+1]);
+ tmp[2]=itm!=mergedNodes.end()?(*itm).second:subEdges[2*j+1];
+ tmp[3]=offset3+(int)addCooQuad.size()/2;
+ double tmp2[2];
+ e2->getBarycenter(tmp2); addCooQuad.insert(addCooQuad.end(),tmp2,tmp2+2);
+ cicnt+=4;
+ cOut->insertAtTheEnd(tmp,tmp+4);
+ ciOut->pushBackSilent(cicnt);
}
- catch(INTERP_KERNEL::Exception& e)
+ else
{
- std::ostringstream oss; oss << "Error when computing residual of cell #" << i << " in source/m1 mesh ! Maybe the neighbours of this cell in mesh are not well connected !\n" << "The deep reason is the following : " << e.what();
- throw INTERP_KERNEL::Exception(oss.str().c_str());
+ tmp[0]=INTERP_KERNEL::NORM_SEG2;
+ itm=mergedNodes.find(subEdges[2*j]);
+ tmp[1]=itm!=mergedNodes.end()?(*itm).second:subEdges[2*j];
+ itm=mergedNodes.find(subEdges[2*j+1]);
+ tmp[2]=itm!=mergedNodes.end()?(*itm).second:subEdges[2*j+1];
+ cicnt+=3;
+ cOut->insertAtTheEnd(tmp,tmp+3);
+ ciOut->pushBackSilent(cicnt);
+ }
+ int tmp00;
+ if(IsColinearOfACellOf(intersectEdge1,colinear2[i],tmp[1],tmp[2],tmp00))
+ {
+ idsInRetColinear->pushBackSilent(kk);
+ idsInMesh1DForIdsInRetColinear->pushBackSilent(tmp00);
}
}
- for(std::map<int,INTERP_KERNEL::Node *>::const_iterator it=mappRev.begin();it!=mappRev.end();it++)
- (*it).second->decrRef();
+ e->decrRef();
}
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> ret(MEDCouplingUMesh::New(mesh1D->getName(),1));
+ ret->setConnectivity(cOut,ciOut,true);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> arr3(DataArrayDouble::New());
+ arr3->useArray(&addCoo[0],false,C_DEALLOC,(int)addCoo.size()/2,2);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> arr4(DataArrayDouble::New()); arr4->useArray(&addCooQuad[0],false,C_DEALLOC,(int)addCooQuad.size()/2,2);
+ std::vector<const DataArrayDouble *> coordss(4);
+ coordss[0]=coords1; coordss[1]=mesh1D->getCoords(); coordss[2]=arr3; coordss[3]=arr4;
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> arr(DataArrayDouble::Aggregate(coordss));
+ ret->setCoords(arr);
+ return ret.retn();
}
-/*!
- * This method is private and is the first step of Partition of 2D mesh (spaceDim==2 and meshDim==2).
- * It builds the descending connectivity of the two meshes, and then using a binary tree
- * it computes the edge intersections. This results in new points being created : they're stored in addCoo.
- * Documentation about parameters colinear2 and subDiv2 can be found in method QuadraticPolygon::splitAbs().
- */
-void MEDCouplingUMesh::IntersectDescending2DMeshes(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2, double eps,
- std::vector< std::vector<int> >& intersectEdge1, std::vector< std::vector<int> >& colinear2, std::vector< std::vector<int> >& subDiv2,
- MEDCouplingUMesh *& m1Desc, DataArrayInt *&desc1, DataArrayInt *&descIndx1, DataArrayInt *&revDesc1, DataArrayInt *&revDescIndx1,
- std::vector<double>& addCoo,
- MEDCouplingUMesh *& m2Desc, DataArrayInt *&desc2, DataArrayInt *&descIndx2, DataArrayInt *&revDesc2, DataArrayInt *&revDescIndx2)
- throw(INTERP_KERNEL::Exception)
+MEDCouplingUMesh *BuildRefined2DCellLinear(const DataArrayDouble *coords, const int *descBg, const int *descEnd, const std::vector< std::vector<int> >& intersectEdge1)
+{
+ std::vector<int> allEdges;
+ for(const int *it2(descBg);it2!=descEnd;it2++)
+ {
+ const std::vector<int>& edge1(intersectEdge1[std::abs(*it2)-1]);
+ if(*it2>0)
+ allEdges.insert(allEdges.end(),edge1.begin(),edge1.end());
+ else
+ allEdges.insert(allEdges.end(),edge1.rbegin(),edge1.rend());
+ }
+ std::size_t nb(allEdges.size());
+ if(nb%2!=0)
+ throw INTERP_KERNEL::Exception("BuildRefined2DCellLinear : internal error 1 !");
+ std::size_t nbOfEdgesOf2DCellSplit(nb/2);
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> ret(MEDCouplingUMesh::New("",2));
+ ret->setCoords(coords);
+ ret->allocateCells(1);
+ std::vector<int> connOut(nbOfEdgesOf2DCellSplit);
+ for(std::size_t kk=0;kk<nbOfEdgesOf2DCellSplit;kk++)
+ connOut[kk]=allEdges[2*kk];
+ ret->insertNextCell(INTERP_KERNEL::NORM_POLYGON,connOut.size(),&connOut[0]);
+ return ret.retn();
+}
+
+MEDCouplingUMesh *BuildRefined2DCellQuadratic(const DataArrayDouble *coords, const MEDCouplingUMesh *mesh2D, int cellIdInMesh2D, const int *descBg, const int *descEnd, const std::vector< std::vector<int> >& intersectEdge1)
+{
+ const int *c(mesh2D->getNodalConnectivity()->begin()),*ci(mesh2D->getNodalConnectivityIndex()->begin());
+ const INTERP_KERNEL::CellModel& cm(INTERP_KERNEL::CellModel::GetCellModel((INTERP_KERNEL::NormalizedCellType)c[ci[cellIdInMesh2D]]));
+ std::size_t ii(0);
+ unsigned sz(cm.getNumberOfSons2(c+ci[cellIdInMesh2D]+1,ci[cellIdInMesh2D+1]-ci[cellIdInMesh2D]-1));
+ if(sz!=std::distance(descBg,descEnd))
+ throw INTERP_KERNEL::Exception("BuildRefined2DCellQuadratic : internal error 1 !");
+ INTERP_KERNEL::AutoPtr<int> tmpPtr(new int[ci[cellIdInMesh2D+1]-ci[cellIdInMesh2D]]);
+ std::vector<int> allEdges,centers;
+ const double *coordsPtr(coords->begin());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> addCoo(DataArrayDouble::New()); addCoo->alloc(0,1);
+ int offset(coords->getNumberOfTuples());
+ for(const int *it2(descBg);it2!=descEnd;it2++,ii++)
+ {
+ INTERP_KERNEL::NormalizedCellType typeOfSon;
+ cm.fillSonCellNodalConnectivity2(ii,c+ci[cellIdInMesh2D]+1,ci[cellIdInMesh2D+1]-ci[cellIdInMesh2D]-1,tmpPtr,typeOfSon);
+ const std::vector<int>& edge1(intersectEdge1[std::abs(*it2)-1]);
+ if(*it2>0)
+ allEdges.insert(allEdges.end(),edge1.begin(),edge1.end());
+ else
+ allEdges.insert(allEdges.end(),edge1.rbegin(),edge1.rend());
+ if(edge1.size()==2)
+ centers.push_back(tmpPtr[2]);//special case where no subsplit of edge -> reuse the original center.
+ else
+ {//the current edge has been subsplit -> create corresponding centers.
+ std::size_t nbOfCentersToAppend(edge1.size()/2);
+ std::map< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node>,int> m;
+ MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> ee(MEDCouplingUMeshBuildQPFromEdge2(typeOfSon,tmpPtr,coordsPtr,m));
+ std::vector<int>::const_iterator it3(allEdges.end()-edge1.size());
+ for(std::size_t k=0;k<nbOfCentersToAppend;k++)
+ {
+ double tmpp[2];
+ const double *aa(coordsPtr+2*(*it3++));
+ const double *bb(coordsPtr+2*(*it3++));
+ ee->getMiddleOfPoints(aa,bb,tmpp);
+ addCoo->insertAtTheEnd(tmpp,tmpp+2);
+ centers.push_back(offset+k);
+ }
+ }
+ }
+ std::size_t nb(allEdges.size());
+ if(nb%2!=0)
+ throw INTERP_KERNEL::Exception("BuildRefined2DCellQuadratic : internal error 2 !");
+ std::size_t nbOfEdgesOf2DCellSplit(nb/2);
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> ret(MEDCouplingUMesh::New("",2));
+ if(addCoo->empty())
+ ret->setCoords(coords);
+ else
+ {
+ addCoo->rearrange(2);
+ addCoo=DataArrayDouble::Aggregate(coords,addCoo);
+ ret->setCoords(addCoo);
+ }
+ ret->allocateCells(1);
+ std::vector<int> connOut(nbOfEdgesOf2DCellSplit);
+ for(std::size_t kk=0;kk<nbOfEdgesOf2DCellSplit;kk++)
+ connOut[kk]=allEdges[2*kk];
+ connOut.insert(connOut.end(),centers.begin(),centers.end());
+ ret->insertNextCell(INTERP_KERNEL::NORM_QPOLYG,connOut.size(),&connOut[0]);
+ return ret.retn();
+}
+
+/*!
+ * This method creates a refinement of a cell in \a mesh2D. Those cell is defined by descending connectivity and the sorted subdivided nodal connectivity
+ * of those edges.
+ *
+ * \param [in] mesh2D - The origin 2D mesh. \b Warning \b coords are not those of \a mesh2D. But mesh2D->getCoords()==coords[:mesh2D->getNumberOfNodes()]
+ */
+MEDCouplingUMesh *BuildRefined2DCell(const DataArrayDouble *coords, const MEDCouplingUMesh *mesh2D, int cellIdInMesh2D, const int *descBg, const int *descEnd, const std::vector< std::vector<int> >& intersectEdge1)
+{
+ const INTERP_KERNEL::CellModel& cm(INTERP_KERNEL::CellModel::GetCellModel(mesh2D->getTypeOfCell(cellIdInMesh2D)));
+ if(!cm.isQuadratic())
+ return BuildRefined2DCellLinear(coords,descBg,descEnd,intersectEdge1);
+ else
+ return BuildRefined2DCellQuadratic(coords,mesh2D,cellIdInMesh2D,descBg,descEnd,intersectEdge1);
+}
+
+void AddCellInMesh2D(MEDCouplingUMesh *mesh2D, const std::vector<int>& conn, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& edges)
+{
+ bool isQuad(false);
+ for(std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >::const_iterator it=edges.begin();it!=edges.end();it++)
+ {
+ const INTERP_KERNEL::Edge *ee(*it);
+ if(dynamic_cast<const INTERP_KERNEL::EdgeArcCircle *>(ee))
+ isQuad=true;
+ }
+ if(!isQuad)
+ mesh2D->insertNextCell(INTERP_KERNEL::NORM_POLYGON,conn.size(),&conn[0]);
+ else
+ {
+ const double *coo(mesh2D->getCoords()->begin());
+ std::size_t sz(conn.size());
+ std::vector<double> addCoo;
+ std::vector<int> conn2(conn);
+ int offset(mesh2D->getNumberOfNodes());
+ for(std::size_t i=0;i<sz;i++)
+ {
+ double tmp[2];
+ edges[(i+1)%sz]->getMiddleOfPoints(coo+2*conn[i],coo+2*conn[(i+1)%sz],tmp);// tony a chier i+1 -> i
+ addCoo.insert(addCoo.end(),tmp,tmp+2);
+ conn2.push_back(offset+(int)i);
+ }
+ mesh2D->getCoords()->rearrange(1);
+ mesh2D->getCoords()->pushBackValsSilent(&addCoo[0],&addCoo[0]+addCoo.size());
+ mesh2D->getCoords()->rearrange(2);
+ mesh2D->insertNextCell(INTERP_KERNEL::NORM_QPOLYG,conn2.size(),&conn2[0]);
+ }
+}
+
+/*!
+ * \b WARNING edges in out1 coming from \a splitMesh1D are \b NOT oriented because only used for equation of curve.
+ *
+ * This method cuts in 2 parts the input 2D cell given using boundaries description (\a edge1Bis and \a edge1BisPtr) using
+ * a set of edges defined in \a splitMesh1D.
+ */
+void BuildMesh2DCutInternal2(const MEDCouplingUMesh *splitMesh1D, const std::vector<int>& edge1Bis, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& edge1BisPtr,
+ std::vector< std::vector<int> >& out0, std::vector< std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> > >& out1)
+{
+ std::size_t nb(edge1Bis.size()/2);
+ std::size_t nbOfEdgesOf2DCellSplit(nb/2);
+ int iEnd(splitMesh1D->getNumberOfCells());
+ if(iEnd==0)
+ throw INTERP_KERNEL::Exception("BuildMesh2DCutInternal2 : internal error ! input 1D mesh must have at least one cell !");
+ std::size_t ii,jj;
+ const int *cSplitPtr(splitMesh1D->getNodalConnectivity()->begin()),*ciSplitPtr(splitMesh1D->getNodalConnectivityIndex()->begin());
+ for(ii=0;ii<nb && edge1Bis[2*ii]!=cSplitPtr[ciSplitPtr[0]+1];ii++);
+ for(jj=ii;jj<nb && edge1Bis[2*jj+1]!=cSplitPtr[ciSplitPtr[iEnd-1]+2];jj++);
+ //
+ if(jj==nb)
+ {//the edges splitMesh1D[iStart:iEnd] does not fully cut the current 2D cell -> single output cell
+ out0.resize(1); out1.resize(1);
+ std::vector<int>& connOut(out0[0]);
+ connOut.resize(nbOfEdgesOf2DCellSplit);
+ std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& edgesPtr(out1[0]);
+ edgesPtr.resize(nbOfEdgesOf2DCellSplit);
+ for(std::size_t kk=0;kk<nbOfEdgesOf2DCellSplit;kk++)
+ {
+ connOut[kk]=edge1Bis[2*kk];
+ edgesPtr[kk]=edge1BisPtr[2*kk];
+ }
+ }
+ else
+ {
+ // [i,iEnd[ contains the
+ out0.resize(2); out1.resize(2);
+ std::vector<int>& connOutLeft(out0[0]);
+ std::vector<int>& connOutRight(out0[1]);//connOutLeft should end with edge1Bis[2*ii] and connOutRight should end with edge1Bis[2*jj+1]
+ std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& eleft(out1[0]);
+ std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& eright(out1[1]);
+ for(std::size_t k=ii;k<jj+1;k++)
+ { connOutLeft.push_back(edge1Bis[2*k+1]); eleft.push_back(edge1BisPtr[2*k+1]); }
+ std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> > ees(iEnd);
+ for(int ik=0;ik<iEnd;ik++)
+ {
+ std::map< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node>,int> m;
+ MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> ee(MEDCouplingUMeshBuildQPFromEdge2((INTERP_KERNEL::NormalizedCellType)cSplitPtr[ciSplitPtr[ik]],cSplitPtr+ciSplitPtr[ik]+1,splitMesh1D->getCoords()->begin(),m));
+ ees[ik]=ee;
+ }
+ for(int ik=iEnd-1;ik>=0;ik--)
+ connOutLeft.push_back(cSplitPtr[ciSplitPtr[ik]+1]);
+ for(std::size_t k=jj+1;k<nbOfEdgesOf2DCellSplit+ii;k++)
+ { connOutRight.push_back(edge1Bis[2*k+1]); eright.push_back(edge1BisPtr[2*k+1]); }
+ eleft.insert(eleft.end(),ees.rbegin(),ees.rend());
+ for(int ik=0;ik<iEnd;ik++)
+ connOutRight.push_back(cSplitPtr[ciSplitPtr[ik]+2]);
+ eright.insert(eright.end(),ees.begin(),ees.end());
+ }
+}
+
+/// @endcond
+
+/// @cond INTERNAL
+
+struct CellInfo
+{
+public:
+ CellInfo() { }
+ CellInfo(const std::vector<int>& edges, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& edgesPtr);
+public:
+ std::vector<int> _edges;
+ std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> > _edges_ptr;
+};
+
+CellInfo::CellInfo(const std::vector<int>& edges, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& edgesPtr)
+{
+ std::size_t nbe(edges.size());
+ std::vector<int> edges2(2*nbe); std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> > edgesPtr2(2*nbe);
+ for(std::size_t i=0;i<nbe;i++)
+ {
+ edges2[2*i]=edges[i]; edges2[2*i+1]=edges[(i+1)%nbe];
+ edgesPtr2[2*i]=edgesPtr[(i+1)%nbe]; edgesPtr2[2*i+1]=edgesPtr[(i+1)%nbe];//tony a chier
+ }
+ _edges.resize(4*nbe); _edges_ptr.resize(4*nbe);
+ std::copy(edges2.begin(),edges2.end(),_edges.begin()); std::copy(edges2.begin(),edges2.end(),_edges.begin()+2*nbe);
+ std::copy(edgesPtr2.begin(),edgesPtr2.end(),_edges_ptr.begin()); std::copy(edgesPtr2.begin(),edgesPtr2.end(),_edges_ptr.begin()+2*nbe);
+}
+
+class EdgeInfo
+{
+public:
+ EdgeInfo(int istart, int iend, const MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh>& mesh):_istart(istart),_iend(iend),_mesh(mesh),_left(-7),_right(-7) { }
+ EdgeInfo(int istart, int iend, int pos, const MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge>& edge):_istart(istart),_iend(iend),_edge(edge),_left(pos),_right(pos+1) { }
+ bool isInMyRange(int pos) const { return pos>=_istart && pos<_iend; }
+ void somethingHappendAt(int pos, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& newLeft, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& newRight);
+ void feedEdgeInfoAt(double eps, const MEDCouplingUMesh *mesh2D, int offset, int neighbors[2]) const;
+private:
+ int _istart;
+ int _iend;
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> _mesh;
+ MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> _edge;
+ int _left;
+ int _right;
+};
+
+void EdgeInfo::somethingHappendAt(int pos, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& newLeft, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& newRight)
+{
+ const MEDCouplingUMesh *mesh(_mesh);
+ if(mesh)
+ return ;
+ if(_right<pos)
+ return ;
+ if(_left>pos)
+ { _left++; _right++; return ; }
+ if(_right==pos)
+ {
+ bool isLeft(std::find(newLeft.begin(),newLeft.end(),_edge)!=newLeft.end()),isRight(std::find(newRight.begin(),newRight.end(),_edge)!=newRight.end());
+ if((isLeft && isRight) || (!isLeft && !isRight))
+ throw INTERP_KERNEL::Exception("EdgeInfo::somethingHappendAt : internal error # 1 !");
+ if(isLeft)
+ return ;
+ if(isRight)
+ {
+ _right++;
+ return ;
+ }
+ }
+ if(_left==pos)
+ {
+ bool isLeft(std::find(newLeft.begin(),newLeft.end(),_edge)!=newLeft.end()),isRight(std::find(newRight.begin(),newRight.end(),_edge)!=newRight.end());
+ if((isLeft && isRight) || (!isLeft && !isRight))
+ throw INTERP_KERNEL::Exception("EdgeInfo::somethingHappendAt : internal error # 2 !");
+ if(isLeft)
+ {
+ _right++;
+ return ;
+ }
+ if(isRight)
+ {
+ _left++;
+ _right++;
+ return ;
+ }
+ }
+}
+
+void EdgeInfo::feedEdgeInfoAt(double eps, const MEDCouplingUMesh *mesh2D, int offset, int neighbors[2]) const
+{
+ const MEDCouplingUMesh *mesh(_mesh);
+ if(!mesh)
+ {
+ neighbors[0]=offset+_left; neighbors[1]=offset+_right;
+ }
+ else
+ {// not fully splitting cell case
+ if(mesh2D->getNumberOfCells()==1)
+ {//little optimization. 1 cell no need to find in which cell mesh is !
+ neighbors[0]=offset; neighbors[1]=offset;
+ return;
+ }
+ else
+ {
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> barys(mesh->getBarycenterAndOwner());
+ int cellId(mesh2D->getCellContainingPoint(barys->begin(),eps));
+ if(cellId==-1)
+ throw INTERP_KERNEL::Exception("EdgeInfo::feedEdgeInfoAt : internal error !");
+ neighbors[0]=offset+cellId; neighbors[1]=offset+cellId;
+ }
+ }
+}
+
+class VectorOfCellInfo
+{
+public:
+ VectorOfCellInfo(const std::vector<int>& edges, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& edgesPtr);
+ std::size_t size() const { return _pool.size(); }
+ int getPositionOf(double eps, const MEDCouplingUMesh *mesh) const;
+ void setMeshAt(int pos, const MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh>& mesh, int istart, int iend, const MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh>& mesh1DInCase, const std::vector< std::vector<int> >& edges, const std::vector< std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> > >& edgePtrs);
+ const std::vector<int>& getConnOf(int pos) const { return get(pos)._edges; }
+ const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& getEdgePtrOf(int pos) const { return get(pos)._edges_ptr; }
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> getZeMesh() const { return _ze_mesh; }
+ void feedEdgeInfoAt(double eps, int pos, int offset, int neighbors[2]) const;
+private:
+ int getZePosOfEdgeGivenItsGlobalId(int pos) const;
+ void updateEdgeInfo(int pos, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& newLeft, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& newRight);
+ const CellInfo& get(int pos) const;
+ CellInfo& get(int pos);
+private:
+ std::vector<CellInfo> _pool;
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> _ze_mesh;
+ std::vector<EdgeInfo> _edge_info;
+};
+
+VectorOfCellInfo::VectorOfCellInfo(const std::vector<int>& edges, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& edgesPtr):_pool(1)
+{
+ _pool[0]._edges=edges;
+ _pool[0]._edges_ptr=edgesPtr;
+}
+
+int VectorOfCellInfo::getPositionOf(double eps, const MEDCouplingUMesh *mesh) const
+{
+ if(_pool.empty())
+ throw INTERP_KERNEL::Exception("VectorOfCellSplitter::getPositionOf : empty !");
+ if(_pool.size()==1)
+ return 0;
+ const MEDCouplingUMesh *zeMesh(_ze_mesh);
+ if(!zeMesh)
+ throw INTERP_KERNEL::Exception("VectorOfCellSplitter::getPositionOf : null aggregated mesh !");
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> barys(mesh->getBarycenterAndOwner());
+ return zeMesh->getCellContainingPoint(barys->begin(),eps);
+}
+
+void VectorOfCellInfo::setMeshAt(int pos, const MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh>& mesh, int istart, int iend, const MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh>& mesh1DInCase, const std::vector< std::vector<int> >& edges, const std::vector< std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> > >& edgePtrs)
+{
+ get(pos);//to check pos
+ bool isFast(pos==0 && _pool.size()==1);
+ std::size_t sz(edges.size());
+ // dealing with edges
+ if(sz==1)
+ _edge_info.push_back(EdgeInfo(istart,iend,mesh1DInCase));
+ else
+ _edge_info.push_back(EdgeInfo(istart,iend,pos,edgePtrs[0].back()));
+ //
+ std::vector<CellInfo> pool(_pool.size()-1+sz);
+ for(int i=0;i<pos;i++)
+ pool[i]=_pool[i];
+ for(std::size_t j=0;j<sz;j++)
+ pool[pos+j]=CellInfo(edges[j],edgePtrs[j]);
+ for(int i=pos+1;i<(int)_pool.size();i++)
+ pool[i+sz-1]=_pool[i];
+ _pool=pool;
+ //
+ if(sz==2)
+ updateEdgeInfo(pos,edgePtrs[0],edgePtrs[1]);
+ //
+ if(isFast)
+ {
+ _ze_mesh=mesh;
+ return ;
+ }
+ //
+ std::vector< MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> > ms;
+ if(pos>0)
+ {
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> elt(static_cast<MEDCouplingUMesh *>(_ze_mesh->buildPartOfMySelf2(0,pos,true)));
+ ms.push_back(elt);
+ }
+ ms.push_back(mesh);
+ if(pos<_ze_mesh->getNumberOfCells()-1)
+ {
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> elt(static_cast<MEDCouplingUMesh *>(_ze_mesh->buildPartOfMySelf2(pos+1,_ze_mesh->getNumberOfCells(),true)));
+ ms.push_back(elt);
+ }
+ std::vector< const MEDCouplingUMesh *> ms2(ms.size());
+ for(std::size_t j=0;j<ms2.size();j++)
+ ms2[j]=ms[j];
+ _ze_mesh=MEDCouplingUMesh::MergeUMeshesOnSameCoords(ms2);
+}
+
+void VectorOfCellInfo::feedEdgeInfoAt(double eps, int pos, int offset, int neighbors[2]) const
+{
+ _edge_info[getZePosOfEdgeGivenItsGlobalId(pos)].feedEdgeInfoAt(eps,_ze_mesh,offset,neighbors);
+}
+
+int VectorOfCellInfo::getZePosOfEdgeGivenItsGlobalId(int pos) const
+{
+ if(pos<0)
+ throw INTERP_KERNEL::Exception("VectorOfCellInfo::getZePosOfEdgeGivenItsGlobalId : invalid id ! Must be >=0 !");
+ int ret(0);
+ for(std::vector<EdgeInfo>::const_iterator it=_edge_info.begin();it!=_edge_info.end();it++,ret++)
+ {
+ if((*it).isInMyRange(pos))
+ return ret;
+ }
+ throw INTERP_KERNEL::Exception("VectorOfCellInfo::getZePosOfEdgeGivenItsGlobalId : invalid id !");
+}
+
+void VectorOfCellInfo::updateEdgeInfo(int pos, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& newLeft, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& newRight)
+{
+ get(pos);//to check;
+ if(_edge_info.empty())
+ return ;
+ std::size_t sz(_edge_info.size()-1);
+ for(std::size_t i=0;i<sz;i++)
+ _edge_info[i].somethingHappendAt(pos,newLeft,newRight);
+}
+
+const CellInfo& VectorOfCellInfo::get(int pos) const
+{
+ if(pos<0 || pos>=(int)_pool.size())
+ throw INTERP_KERNEL::Exception("VectorOfCellSplitter::get const : invalid pos !");
+ return _pool[pos];
+}
+
+CellInfo& VectorOfCellInfo::get(int pos)
+{
+ if(pos<0 || pos>=(int)_pool.size())
+ throw INTERP_KERNEL::Exception("VectorOfCellSplitter::get : invalid pos !");
+ return _pool[pos];
+}
+
+/*!
+ * Given :
+ * - a \b closed set of edges ( \a allEdges and \a allEdgesPtr ) that defines the split descending 2D cell.
+ * - \a splitMesh1D a split 2D curve mesh contained into 2D cell defined above.
+ *
+ * This method returns the 2D mesh and feeds \a idsLeftRight using offset.
+ *
+ * Algorithm : \a splitMesh1D is cut into contiguous parts. Each contiguous parts will build incrementally the output 2D cells.
+ *
+ * \param [in] allEdges a list of pairs (beginNode, endNode). Linked with \a allEdgesPtr to get the equation of edge.
+ */
+MEDCouplingUMesh *BuildMesh2DCutInternal(double eps, const MEDCouplingUMesh *splitMesh1D, const std::vector<int>& allEdges, const std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> >& allEdgesPtr, int offset,
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt>& idsLeftRight)
+{
+ int nbCellsInSplitMesh1D(splitMesh1D->getNumberOfCells());
+ if(nbCellsInSplitMesh1D==0)
+ throw INTERP_KERNEL::Exception("BuildMesh2DCutInternal : internal error ! input 1D mesh must have at least one cell !");
+ const int *cSplitPtr(splitMesh1D->getNodalConnectivity()->begin()),*ciSplitPtr(splitMesh1D->getNodalConnectivityIndex()->begin());
+ std::size_t nb(allEdges.size()),jj;
+ if(nb%2!=0)
+ throw INTERP_KERNEL::Exception("BuildMesh2DCutFrom : internal error 2 !");
+ std::vector<int> edge1Bis(nb*2);
+ std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> > edge1BisPtr(nb*2);
+ std::copy(allEdges.begin(),allEdges.end(),edge1Bis.begin());
+ std::copy(allEdges.begin(),allEdges.end(),edge1Bis.begin()+nb);
+ std::copy(allEdgesPtr.begin(),allEdgesPtr.end(),edge1BisPtr.begin());
+ std::copy(allEdgesPtr.begin(),allEdgesPtr.end(),edge1BisPtr.begin()+nb);
+ //
+ idsLeftRight=DataArrayInt::New(); idsLeftRight->alloc(nbCellsInSplitMesh1D*2); idsLeftRight->fillWithValue(-2); idsLeftRight->rearrange(2);
+ int *idsLeftRightPtr(idsLeftRight->getPointer());
+ VectorOfCellInfo pool(edge1Bis,edge1BisPtr);
+ for(int iStart=0;iStart<nbCellsInSplitMesh1D;)
+ {// split [0:nbCellsInSplitMesh1D) in contiguous parts [iStart:iEnd)
+ int iEnd(iStart);
+ for(;iEnd<nbCellsInSplitMesh1D;)
+ {
+ for(jj=0;jj<nb && edge1Bis[2*jj+1]!=cSplitPtr[ciSplitPtr[iEnd]+2];jj++);
+ if(jj!=nb)
+ break;
+ else
+ iEnd++;
+ }
+ if(iEnd<nbCellsInSplitMesh1D)
+ iEnd++;
+ //
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> partOfSplitMesh1D(static_cast<MEDCouplingUMesh *>(splitMesh1D->buildPartOfMySelf2(iStart,iEnd,1,true)));
+ int pos(pool.getPositionOf(eps,partOfSplitMesh1D));
+ //
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh>retTmp(MEDCouplingUMesh::New("",2));
+ retTmp->setCoords(splitMesh1D->getCoords());
+ retTmp->allocateCells();
+
+ std::vector< std::vector<int> > out0;
+ std::vector< std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> > > out1;
+
+ BuildMesh2DCutInternal2(partOfSplitMesh1D,pool.getConnOf(pos),pool.getEdgePtrOf(pos),out0,out1);
+ for(std::size_t cnt=0;cnt<out0.size();cnt++)
+ AddCellInMesh2D(retTmp,out0[cnt],out1[cnt]);
+ pool.setMeshAt(pos,retTmp,iStart,iEnd,partOfSplitMesh1D,out0,out1);
+ //
+ iStart=iEnd;
+ }
+ for(int mm=0;mm<nbCellsInSplitMesh1D;mm++)
+ pool.feedEdgeInfoAt(eps,mm,offset,idsLeftRightPtr+2*mm);
+ return pool.getZeMesh().retn();
+}
+
+MEDCouplingUMesh *BuildMesh2DCutFrom(double eps, int cellIdInMesh2D, const MEDCouplingUMesh *mesh2DDesc, const MEDCouplingUMesh *splitMesh1D,
+ const int *descBg, const int *descEnd, const std::vector< std::vector<int> >& intersectEdge1, int offset,
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt>& idsLeftRight)
+{
+ const int *cdescPtr(mesh2DDesc->getNodalConnectivity()->begin()),*cidescPtr(mesh2DDesc->getNodalConnectivityIndex()->begin());
+ //
+ std::vector<int> allEdges;
+ std::vector< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> > allEdgesPtr; // for each sub edge in splitMesh2D the uncut Edge object of the original mesh2D
+ for(const int *it(descBg);it!=descEnd;it++) // for all edges in the descending connectivity of the 2D mesh in relative Fortran mode
+ {
+ int edgeId(std::abs(*it)-1);
+ std::map< MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node>,int> m;
+ MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> ee(MEDCouplingUMeshBuildQPFromEdge2((INTERP_KERNEL::NormalizedCellType)cdescPtr[cidescPtr[edgeId]],cdescPtr+cidescPtr[edgeId]+1,mesh2DDesc->getCoords()->begin(),m));
+ const std::vector<int>& edge1(intersectEdge1[edgeId]);
+ if(*it>0)
+ allEdges.insert(allEdges.end(),edge1.begin(),edge1.end());
+ else
+ allEdges.insert(allEdges.end(),edge1.rbegin(),edge1.rend());
+ std::size_t sz(edge1.size());
+ for(std::size_t cnt=0;cnt<sz;cnt++)
+ allEdgesPtr.push_back(ee);
+ }
+ //
+ return BuildMesh2DCutInternal(eps,splitMesh1D,allEdges,allEdgesPtr,offset,idsLeftRight);
+}
+
+bool AreEdgeEqual(const double *coo2D, const INTERP_KERNEL::CellModel& typ1, const int *conn1, const INTERP_KERNEL::CellModel& typ2, const int *conn2, double eps)
+{
+ if(!typ1.isQuadratic() && !typ2.isQuadratic())
+ {//easy case comparison not
+ return conn1[0]==conn2[0] && conn1[1]==conn2[1];
+ }
+ else if(typ1.isQuadratic() && typ2.isQuadratic())
+ {
+ bool status0(conn1[0]==conn2[0] && conn1[1]==conn2[1]);
+ if(!status0)
+ return false;
+ if(conn1[2]==conn2[2])
+ return true;
+ const double *a(coo2D+2*conn1[2]),*b(coo2D+2*conn2[2]);
+ double dist(sqrt((a[0]-b[0])*(a[0]-b[0])+(a[1]-b[1])*(a[1]-b[1])));
+ return dist<eps;
+ }
+ else
+ {//only one is quadratic
+ bool status0(conn1[0]==conn2[0] && conn1[1]==conn2[1]);
+ if(!status0)
+ return false;
+ const double *a(0),*bb(0),*be(0);
+ if(typ1.isQuadratic())
+ {
+ a=coo2D+2*conn1[2]; bb=coo2D+2*conn2[0]; be=coo2D+2*conn2[1];
+ }
+ else
+ {
+ a=coo2D+2*conn2[2]; bb=coo2D+2*conn1[0]; be=coo2D+2*conn1[1];
+ }
+ double b[2]; b[0]=(be[0]+bb[0])/2.; b[1]=(be[1]+bb[1])/2.;
+ double dist(sqrt((a[0]-b[0])*(a[0]-b[0])+(a[1]-b[1])*(a[1]-b[1])));
+ return dist<eps;
+ }
+}
+
+/*!
+ * This method returns among the cellIds [ \a candidatesIn2DBg , \a candidatesIn2DEnd ) in \a mesh2DSplit those exactly sharing \a cellIdInMesh1DSplitRelative in \a mesh1DSplit.
+ * \a mesh2DSplit and \a mesh1DSplit are expected to share the coordinates array.
+ *
+ * \param [in] cellIdInMesh1DSplitRelative is in Fortran mode using sign to specify direction.
+ */
+int FindRightCandidateAmong(const MEDCouplingUMesh *mesh2DSplit, const int *candidatesIn2DBg, const int *candidatesIn2DEnd, const MEDCouplingUMesh *mesh1DSplit, int cellIdInMesh1DSplitRelative, double eps)
+{
+ if(candidatesIn2DEnd==candidatesIn2DBg)
+ throw INTERP_KERNEL::Exception("FindRightCandidateAmong : internal error 1 !");
+ const double *coo(mesh2DSplit->getCoords()->begin());
+ if(std::distance(candidatesIn2DBg,candidatesIn2DEnd)==1)
+ return *candidatesIn2DBg;
+ int edgeId(std::abs(cellIdInMesh1DSplitRelative)-1);
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> cur1D(static_cast<MEDCouplingUMesh *>(mesh1DSplit->buildPartOfMySelf(&edgeId,&edgeId+1,true)));
+ if(cellIdInMesh1DSplitRelative<0)
+ cur1D->changeOrientationOfCells();
+ const int *c1D(cur1D->getNodalConnectivity()->begin());
+ const INTERP_KERNEL::CellModel& ref1DType(INTERP_KERNEL::CellModel::GetCellModel((INTERP_KERNEL::NormalizedCellType)c1D[0]));
+ for(const int *it=candidatesIn2DBg;it!=candidatesIn2DEnd;it++)
+ {
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> cur2D(static_cast<MEDCouplingUMesh *>(mesh2DSplit->buildPartOfMySelf(it,it+1,true)));
+ const int *c(cur2D->getNodalConnectivity()->begin()),*ci(cur2D->getNodalConnectivityIndex()->begin());
+ const INTERP_KERNEL::CellModel &cm(INTERP_KERNEL::CellModel::GetCellModel((INTERP_KERNEL::NormalizedCellType)c[ci[0]]));
+ unsigned sz(cm.getNumberOfSons2(c+ci[0]+1,ci[1]-ci[0]-1));
+ INTERP_KERNEL::AutoPtr<int> tmpPtr(new int[ci[1]-ci[0]]);
+ for(unsigned it2=0;it2<sz;it2++)
+ {
+ INTERP_KERNEL::NormalizedCellType typeOfSon;
+ cm.fillSonCellNodalConnectivity2(it2,c+ci[0]+1,ci[1]-ci[0]-1,tmpPtr,typeOfSon);
+ const INTERP_KERNEL::CellModel &curCM(INTERP_KERNEL::CellModel::GetCellModel(typeOfSon));
+ if(AreEdgeEqual(coo,ref1DType,c1D+1,curCM,tmpPtr,eps))
+ return *it;
+ }
+ }
+ throw INTERP_KERNEL::Exception("FindRightCandidateAmong : internal error 2 ! Unable to find the edge among split cell !");
+}
+
+/// @endcond
+
+/*!
+ * Partitions the first given 2D mesh using the second given 1D mesh as a tool.
+ * Thus the final result contains the aggregation of nodes of \a mesh2D, then nodes of \a mesh1D, then new nodes that are the result of the intersection
+ * and finaly, in case of quadratic polygon the centers of edges new nodes.
+ * The meshes should be in 2D space. In addition, returns two arrays mapping cells of the resulting mesh to cells of the input.
+ *
+ * \param [in] mesh2D - the 2D mesh (spacedim=meshdim=2) to be intersected using \a mesh1D tool. The mesh must be so that each point in the space covered by \a mesh2D
+ * must be covered exactly by one entity, \b no \b more. If it is not the case, some tools are available to heal the mesh (conformize2D, mergeNodes)
+ * \param [in] mesh1D - the 1D mesh (spacedim=2 meshdim=1) the is the tool that will be used to intersect \a mesh2D. \a mesh1D must be ordered consecutively. If it is not the case
+ * you can invoke orderConsecutiveCells1D on \a mesh1D.
+ * \param [in] eps - precision used to perform intersections and localization operations.
+ * \param [out] splitMesh2D - the result of the split of \a mesh2D mesh.
+ * \param [out] splitMesh1D - the result of the split of \a mesh1D mesh.
+ * \param [out] cellIdInMesh2D - the array that gives for each cell id \a i in \a splitMesh2D the id in \a mesh2D it comes from.
+ * So this array has a number of tuples equal to the number of cells of \a splitMesh2D and a number of component equal to 1.
+ * \param [out] cellIdInMesh1D - the array of pair that gives for each cell id \a i in \a splitMesh1D the cell in \a splitMesh2D on the left for the 1st component
+ * and the cell in \a splitMesh2D on the right for the 2nt component. -1 means no cell.
+ * So this array has a number of tuples equal to the number of cells of \a splitMesh1D and a number of components equal to 2.
+ *
+ * \sa Intersect2DMeshes, orderConsecutiveCells1D, conformize2D, mergeNodes
+ */
+void MEDCouplingUMesh::Intersect2DMeshWith1DLine(const MEDCouplingUMesh *mesh2D, const MEDCouplingUMesh *mesh1D, double eps, MEDCouplingUMesh *&splitMesh2D, MEDCouplingUMesh *&splitMesh1D, DataArrayInt *&cellIdInMesh2D, DataArrayInt *&cellIdInMesh1D)
+{
+ if(!mesh2D || !mesh1D)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::Intersect2DMeshWith1DLine : input meshes must be not NULL !");
+ mesh2D->checkFullyDefined();
+ mesh1D->checkFullyDefined();
+ const std::vector<std::string>& compNames(mesh2D->getCoords()->getInfoOnComponents());
+ if(mesh2D->getMeshDimension()!=2 || mesh2D->getSpaceDimension()!=2 || mesh1D->getMeshDimension()!=1 || mesh1D->getSpaceDimension()!=2)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::Intersect2DMeshWith1DLine works with mesh2D with spacedim=meshdim=2 and mesh1D with meshdim=1 spaceDim=2 !");
+ // Step 1: compute all edge intersections (new nodes)
+ std::vector< std::vector<int> > intersectEdge1, colinear2, subDiv2;
+ std::vector<double> addCoo,addCoordsQuadratic; // coordinates of newly created nodes
+ INTERP_KERNEL::QUADRATIC_PLANAR::_precision=eps;
+ INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=eps;
+ //
+ // Build desc connectivity
+ DataArrayInt *desc1(DataArrayInt::New()),*descIndx1(DataArrayInt::New()),*revDesc1(DataArrayInt::New()),*revDescIndx1(DataArrayInt::New());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> dd1(desc1),dd2(descIndx1),dd3(revDesc1),dd4(revDescIndx1);
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> m1Desc(mesh2D->buildDescendingConnectivity2(desc1,descIndx1,revDesc1,revDescIndx1));
+ std::map<int,int> mergedNodes;
+ Intersect1DMeshes(m1Desc,mesh1D,eps,intersectEdge1,colinear2,subDiv2,addCoo,mergedNodes);
+ // use mergeNodes to fix intersectEdge1
+ for(std::vector< std::vector<int> >::iterator it0=intersectEdge1.begin();it0!=intersectEdge1.end();it0++)
+ {
+ std::size_t n((*it0).size()/2);
+ int eltStart((*it0)[0]),eltEnd((*it0)[2*n-1]);
+ std::map<int,int>::const_iterator it1;
+ it1=mergedNodes.find(eltStart);
+ if(it1!=mergedNodes.end())
+ (*it0)[0]=(*it1).second;
+ it1=mergedNodes.find(eltEnd);
+ if(it1!=mergedNodes.end())
+ (*it0)[2*n-1]=(*it1).second;
+ }
+ //
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> addCooDa(DataArrayDouble::New());
+ addCooDa->useArray(&addCoo[0],false,C_DEALLOC,(int)addCoo.size()/2,2);
+ // Step 2: re-order newly created nodes according to the ordering found in m2
+ std::vector< std::vector<int> > intersectEdge2;
+ BuildIntersectEdges(m1Desc,mesh1D,addCoo,subDiv2,intersectEdge2);
+ subDiv2.clear();
+ // Step 3: compute splitMesh1D
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> idsInRet1Colinear,idsInDescMesh2DForIdsInRetColinear;
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret2(DataArrayInt::New()); ret2->alloc(0,1);
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> ret1(BuildMesh1DCutFrom(mesh1D,intersectEdge2,mesh2D->getCoords(),addCoo,mergedNodes,colinear2,intersectEdge1,
+ idsInRet1Colinear,idsInDescMesh2DForIdsInRetColinear));
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret3(DataArrayInt::New()); ret3->alloc(ret1->getNumberOfCells()*2,1); ret3->fillWithValue(std::numeric_limits<int>::max()); ret3->rearrange(2);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> idsInRet1NotColinear(idsInRet1Colinear->buildComplement(ret1->getNumberOfCells()));
+ // deal with cells in mesh2D that are not cut but only some of their edges are
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> idsInDesc2DToBeRefined(idsInDescMesh2DForIdsInRetColinear->deepCpy());
+ idsInDesc2DToBeRefined->abs(); idsInDesc2DToBeRefined->applyLin(1,-1);
+ idsInDesc2DToBeRefined=idsInDesc2DToBeRefined->buildUnique();
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> out0s;//ids in mesh2D that are impacted by the fact that some edges of \a mesh1D are part of the edges of those cells
+ if(!idsInDesc2DToBeRefined->empty())
+ {
+ DataArrayInt *out0(0),*outi0(0);
+ MEDCouplingUMesh::ExtractFromIndexedArrays(idsInDesc2DToBeRefined->begin(),idsInDesc2DToBeRefined->end(),dd3,dd4,out0,outi0);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> outi0s(outi0);
+ out0s=out0;
+ out0s=out0s->buildUnique();
+ out0s->sort(true);
+ }
+ //
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> ret1NonCol(static_cast<MEDCouplingUMesh *>(ret1->buildPartOfMySelf(idsInRet1NotColinear->begin(),idsInRet1NotColinear->end())));
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> baryRet1(ret1NonCol->getBarycenterAndOwner());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> elts,eltsIndex;
+ mesh2D->getCellsContainingPoints(baryRet1->begin(),baryRet1->getNumberOfTuples(),eps,elts,eltsIndex);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> eltsIndex2(eltsIndex->deltaShiftIndex());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> eltsIndex3(eltsIndex2->getIdsEqual(1));
+ if(eltsIndex2->count(0)+eltsIndex3->getNumberOfTuples()!=ret1NonCol->getNumberOfCells())
+ throw INTERP_KERNEL::Exception("Intersect2DMeshWith1DLine : internal error 1 !");
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> cellsToBeModified(elts->buildUnique());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> untouchedCells(cellsToBeModified->buildComplement(mesh2D->getNumberOfCells()));
+ if((DataArrayInt *)out0s)
+ untouchedCells=untouchedCells->buildSubstraction(out0s);//if some edges in ret1 are colinear to descending mesh of mesh2D remove cells from untouched one
+ std::vector< MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> > outMesh2DSplit;
+ // OK all is ready to insert in ret2 mesh
+ if(!untouchedCells->empty())
+ {// the most easy part, cells in mesh2D not impacted at all
+ outMesh2DSplit.push_back(static_cast<MEDCouplingUMesh *>(mesh2D->buildPartOfMySelf(untouchedCells->begin(),untouchedCells->end())));
+ outMesh2DSplit.back()->setCoords(ret1->getCoords());
+ ret2->pushBackValsSilent(untouchedCells->begin(),untouchedCells->end());
+ }
+ if((DataArrayInt *)out0s)
+ {// here dealing with cells in out0s but not in cellsToBeModified
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> fewModifiedCells(out0s->buildSubstraction(cellsToBeModified));
+ const int *rdptr(dd3->begin()),*rdiptr(dd4->begin()),*dptr(dd1->begin()),*diptr(dd2->begin());
+ for(const int *it=fewModifiedCells->begin();it!=fewModifiedCells->end();it++)
+ {
+ outMesh2DSplit.push_back(BuildRefined2DCell(ret1->getCoords(),mesh2D,*it,dptr+diptr[*it],dptr+diptr[*it+1],intersectEdge1));
+ ret1->setCoords(outMesh2DSplit.back()->getCoords());
+ }
+ int offset(ret2->getNumberOfTuples());
+ ret2->pushBackValsSilent(fewModifiedCells->begin(),fewModifiedCells->end());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> partOfRet3(DataArrayInt::New()); partOfRet3->alloc(2*idsInRet1Colinear->getNumberOfTuples(),1);
+ partOfRet3->fillWithValue(std::numeric_limits<int>::max()); partOfRet3->rearrange(2);
+ int kk(0),*ret3ptr(partOfRet3->getPointer());
+ for(const int *it=idsInDescMesh2DForIdsInRetColinear->begin();it!=idsInDescMesh2DForIdsInRetColinear->end();it++,kk++)
+ {
+ int faceId(std::abs(*it)-1);
+ for(const int *it2=rdptr+rdiptr[faceId];it2!=rdptr+rdiptr[faceId+1];it2++)
+ {
+ int tmp(fewModifiedCells->locateValue(*it2));
+ if(tmp!=-1)
+ {
+ if(std::find(dptr+diptr[*it2],dptr+diptr[*it2+1],-(*it))!=dptr+diptr[*it2+1])
+ ret3ptr[2*kk]=tmp+offset;
+ if(std::find(dptr+diptr[*it2],dptr+diptr[*it2+1],(*it))!=dptr+diptr[*it2+1])
+ ret3ptr[2*kk+1]=tmp+offset;
+ }
+ else
+ {//the current edge is shared by a 2D cell that will be split just after
+ if(std::find(dptr+diptr[*it2],dptr+diptr[*it2+1],-(*it))!=dptr+diptr[*it2+1])
+ ret3ptr[2*kk]=-(*it2+1);
+ if(std::find(dptr+diptr[*it2],dptr+diptr[*it2+1],(*it))!=dptr+diptr[*it2+1])
+ ret3ptr[2*kk+1]=-(*it2+1);
+ }
+ }
+ }
+ m1Desc->setCoords(ret1->getCoords());
+ ret1NonCol->setCoords(ret1->getCoords());
+ ret3->setPartOfValues3(partOfRet3,idsInRet1Colinear->begin(),idsInRet1Colinear->end(),0,2,1,true);
+ if(!outMesh2DSplit.empty())
+ {
+ DataArrayDouble *da(outMesh2DSplit.back()->getCoords());
+ for(std::vector< MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> >::iterator itt=outMesh2DSplit.begin();itt!=outMesh2DSplit.end();itt++)
+ (*itt)->setCoords(da);
+ }
+ }
+ cellsToBeModified=cellsToBeModified->buildUniqueNotSorted();
+ for(const int *it=cellsToBeModified->begin();it!=cellsToBeModified->end();it++)
+ {
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> idsNonColPerCell(elts->getIdsEqual(*it));
+ idsNonColPerCell->transformWithIndArr(eltsIndex3->begin(),eltsIndex3->end());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> idsNonColPerCell2(idsInRet1NotColinear->selectByTupleId(idsNonColPerCell->begin(),idsNonColPerCell->end()));
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> partOfMesh1CuttingCur2DCell(static_cast<MEDCouplingUMesh *>(ret1NonCol->buildPartOfMySelf(idsNonColPerCell->begin(),idsNonColPerCell->end())));
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> partOfRet3;
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> splitOfOneCell(BuildMesh2DCutFrom(eps,*it,m1Desc,partOfMesh1CuttingCur2DCell,dd1->begin()+dd2->getIJ(*it,0),dd1->begin()+dd2->getIJ((*it)+1,0),intersectEdge1,ret2->getNumberOfTuples(),partOfRet3));
+ ret3->setPartOfValues3(partOfRet3,idsNonColPerCell2->begin(),idsNonColPerCell2->end(),0,2,1,true);
+ outMesh2DSplit.push_back(splitOfOneCell);
+ for(int i=0;i<splitOfOneCell->getNumberOfCells();i++)
+ ret2->pushBackSilent(*it);
+ }
+ //
+ std::size_t nbOfMeshes(outMesh2DSplit.size());
+ std::vector<const MEDCouplingUMesh *> tmp(nbOfMeshes);
+ for(std::size_t i=0;i<nbOfMeshes;i++)
+ tmp[i]=outMesh2DSplit[i];
+ //
+ ret1->getCoords()->setInfoOnComponents(compNames);
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> ret2D(MEDCouplingUMesh::MergeUMeshesOnSameCoords(tmp));
+ // To finish - filter ret3 - std::numeric_limits<int>::max() -> -1 - negate values must be resolved.
+ ret3->rearrange(1);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> edgesToDealWith(ret3->getIdsStrictlyNegative());
+ for(const int *it=edgesToDealWith->begin();it!=edgesToDealWith->end();it++)
+ {
+ int old2DCellId(-ret3->getIJ(*it,0)-1);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> candidates(ret2->getIdsEqual(old2DCellId));
+ ret3->setIJ(*it,0,FindRightCandidateAmong(ret2D,candidates->begin(),candidates->end(),ret1,*it%2==0?-((*it)/2+1):(*it)/2+1,eps));// div by 2 because 2 components natively in ret3
+ }
+ ret3->replaceOneValByInThis(std::numeric_limits<int>::max(),-1);
+ ret3->rearrange(2);
+ //
+ splitMesh1D=ret1.retn();
+ splitMesh2D=ret2D.retn();
+ cellIdInMesh2D=ret2.retn();
+ cellIdInMesh1D=ret3.retn();
+}
+
+/**
+ * Private. Third step of the partitioning algorithm (Intersect2DMeshes): reconstruct full 2D cells from the
+ * (newly created) nodes corresponding to the edge intersections.
+ * Output params:
+ * @param[out] cr, crI connectivity of the resulting mesh
+ * @param[out] cNb1, cNb2 correspondance arrays giving for the merged mesh the initial cells IDs in m1 / m2
+ * TODO: describe input parameters
+ */
+void MEDCouplingUMesh::BuildIntersecting2DCellsFromEdges(double eps, const MEDCouplingUMesh *m1, const int *desc1, const int *descIndx1,
+ const std::vector<std::vector<int> >& intesctEdges1, const std::vector< std::vector<int> >& colinear2,
+ const MEDCouplingUMesh *m2, const int *desc2, const int *descIndx2, const std::vector<std::vector<int> >& intesctEdges2,
+ const std::vector<double>& addCoords,
+ std::vector<double>& addCoordsQuadratic, std::vector<int>& cr, std::vector<int>& crI, std::vector<int>& cNb1, std::vector<int>& cNb2)
+{
+ static const int SPACEDIM=2;
+ const double *coo1(m1->getCoords()->getConstPointer());
+ const int *conn1(m1->getNodalConnectivity()->getConstPointer()),*connI1(m1->getNodalConnectivityIndex()->getConstPointer());
+ int offset1(m1->getNumberOfNodes());
+ const double *coo2(m2->getCoords()->getConstPointer());
+ const int *conn2(m2->getNodalConnectivity()->getConstPointer()),*connI2(m2->getNodalConnectivityIndex()->getConstPointer());
+ int offset2(offset1+m2->getNumberOfNodes());
+ int offset3(offset2+((int)addCoords.size())/2);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> bbox1Arr(m1->getBoundingBoxForBBTree()),bbox2Arr(m2->getBoundingBoxForBBTree());
+ const double *bbox1(bbox1Arr->begin()),*bbox2(bbox2Arr->begin());
+ // Here a BBTree on 2D-cells, not on segments:
+ BBTree<SPACEDIM,int> myTree(bbox2,0,0,m2->getNumberOfCells(),eps);
+ int ncell1(m1->getNumberOfCells());
+ crI.push_back(0);
+ for(int i=0;i<ncell1;i++)
+ {
+ std::vector<int> candidates2;
+ myTree.getIntersectingElems(bbox1+i*2*SPACEDIM,candidates2);
+ std::map<INTERP_KERNEL::Node *,int> mapp;
+ std::map<int,INTERP_KERNEL::Node *> mappRev;
+ INTERP_KERNEL::QuadraticPolygon pol1;
+ INTERP_KERNEL::NormalizedCellType typ=(INTERP_KERNEL::NormalizedCellType)conn1[connI1[i]];
+ const INTERP_KERNEL::CellModel& cm=INTERP_KERNEL::CellModel::GetCellModel(typ);
+ // Populate mapp and mappRev with nodes from the current cell (i) from mesh1 - this also builds the Node* objects:
+ MEDCouplingUMeshBuildQPFromMesh3(coo1,offset1,coo2,offset2,addCoords,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,/* output */mapp,mappRev);
+ // pol1 is the full cell from mesh2, in QP format, with all the additional intersecting nodes.
+ pol1.buildFromCrudeDataArray(mappRev,cm.isQuadratic(),conn1+connI1[i]+1,coo1,
+ desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1);
+ //
+ std::set<INTERP_KERNEL::Edge *> edges1;// store all edges of pol1 that are NOT consumed by intersect cells. If any after iteration over candidates2 -> a part of pol1 should appear in result
+ std::set<INTERP_KERNEL::Edge *> edgesBoundary2;// store all edges that are on boundary of (pol2 intersect pol1) minus edges on pol1.
+ INTERP_KERNEL::IteratorOnComposedEdge it1(&pol1);
+ for(it1.first();!it1.finished();it1.next())
+ edges1.insert(it1.current()->getPtr());
+ //
+ std::map<int,std::vector<INTERP_KERNEL::ElementaryEdge *> > edgesIn2ForShare; // common edges
+ std::vector<INTERP_KERNEL::QuadraticPolygon> pol2s(candidates2.size());
+ int ii=0;
+ for(std::vector<int>::const_iterator it2=candidates2.begin();it2!=candidates2.end();it2++,ii++)
+ {
+ INTERP_KERNEL::NormalizedCellType typ2=(INTERP_KERNEL::NormalizedCellType)conn2[connI2[*it2]];
+ const INTERP_KERNEL::CellModel& cm2=INTERP_KERNEL::CellModel::GetCellModel(typ2);
+ // Complete mapping with elements coming from the current cell it2 in mesh2:
+ MEDCouplingUMeshBuildQPFromMesh3(coo1,offset1,coo2,offset2,addCoords,desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,/* output */mapp,mappRev);
+ // pol2 is the new QP in the final merged result.
+ pol2s[ii].buildFromCrudeDataArray2(mappRev,cm2.isQuadratic(),conn2+connI2[*it2]+1,coo2,desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,
+ pol1,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,colinear2, /* output */ edgesIn2ForShare);
+ }
+ ii=0;
+ for(std::vector<int>::const_iterator it2=candidates2.begin();it2!=candidates2.end();it2++,ii++)
+ {
+ INTERP_KERNEL::ComposedEdge::InitLocationsWithOther(pol1,pol2s[ii]);
+ pol2s[ii].updateLocOfEdgeFromCrudeDataArray2(desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,pol1,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,colinear2);
+ //MEDCouplingUMeshAssignOnLoc(pol1,pol2,desc1+descIndx1[i],desc1+descIndx1[i+1],intesctEdges1,desc2+descIndx2[*it2],desc2+descIndx2[*it2+1],intesctEdges2,colinear2);
+ pol1.buildPartitionsAbs(pol2s[ii],edges1,edgesBoundary2,mapp,i,*it2,offset3,addCoordsQuadratic,cr,crI,cNb1,cNb2);
+ }
+ // Deals with remaining (non-consumed) edges from m1: these are the edges that were never touched
+ // by m2 but that we still want to keep in the final result.
+ if(!edges1.empty())
+ {
+ try
+ {
+ INTERP_KERNEL::QuadraticPolygon::ComputeResidual(pol1,edges1,edgesBoundary2,mapp,offset3,i,addCoordsQuadratic,cr,crI,cNb1,cNb2);
+ }
+ catch(INTERP_KERNEL::Exception& e)
+ {
+ std::ostringstream oss; oss << "Error when computing residual of cell #" << i << " in source/m1 mesh ! Maybe the neighbours of this cell in mesh are not well connected !\n" << "The deep reason is the following : " << e.what();
+ throw INTERP_KERNEL::Exception(oss.str().c_str());
+ }
+ }
+ for(std::map<int,INTERP_KERNEL::Node *>::const_iterator it=mappRev.begin();it!=mappRev.end();it++)
+ (*it).second->decrRef();
+ }
+}
+
+/**
+ * Provides a renumbering of the cells of this (which has to be a piecewise connected 1D line), so that
+ * the segments of the line are indexed in consecutive order (i.e. cells \a i and \a i+1 are neighbors).
+ * This doesn't modify the mesh. This method only works using nodal connectivity consideration. Coordinates of nodes are ignored here.
+ * The caller is to deal with the resulting DataArrayInt.
+ * \throw If the coordinate array is not set.
+ * \throw If the nodal connectivity of the cells is not defined.
+ * \throw If m1 is not a mesh of dimension 2, or m1 is not a mesh of dimension 1
+ * \throw If m2 is not a (piecewise) line (i.e. if a point has more than 2 adjacent segments)
+ *
+ * \sa DataArrayInt::sortEachPairToMakeALinkedList
+ */
+DataArrayInt *MEDCouplingUMesh::orderConsecutiveCells1D() const
+{
+ checkFullyDefined();
+ if(getMeshDimension()!=1)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::orderConsecutiveCells1D works on unstructured mesh with meshdim = 1 !");
+
+ // Check that this is a line (and not a more complex 1D mesh) - each point is used at most by 2 segments:
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> _d(DataArrayInt::New()),_dI(DataArrayInt::New());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> _rD(DataArrayInt::New()),_rDI(DataArrayInt::New());
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> m_points(buildDescendingConnectivity(_d, _dI, _rD, _rDI));
+ const int *d(_d->getConstPointer()), *dI(_dI->getConstPointer());
+ const int *rD(_rD->getConstPointer()), *rDI(_rDI->getConstPointer());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> _dsi(_rDI->deltaShiftIndex());
+ const int * dsi(_dsi->getConstPointer());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> dsii = _dsi->getIdsNotInRange(0,3);
+ m_points=0;
+ if (dsii->getNumberOfTuples())
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::orderConsecutiveCells1D only work with a mesh being a (piecewise) connected line!");
+
+ int nc(getNumberOfCells());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> result(DataArrayInt::New());
+ result->alloc(nc,1);
+
+ // set of edges not used so far
+ std::set<int> edgeSet;
+ for (int i=0; i<nc; edgeSet.insert(i), i++);
+
+ int startSeg=0;
+ int newIdx=0;
+ // while we have points with only one neighbor segments
+ do
+ {
+ std::list<int> linePiece;
+ // fills a list of consecutive segment linked to startSeg. This can go forward or backward.
+ for (int direction=0;direction<2;direction++) // direction=0 --> forward, direction=1 --> backward
+ {
+ // Fill the list forward (resp. backward) from the start segment:
+ int activeSeg = startSeg;
+ int prevPointId = -20;
+ int ptId;
+ while (!edgeSet.empty())
+ {
+ if (!(direction == 1 && prevPointId==-20)) // prevent adding twice startSeg
+ {
+ if (direction==0)
+ linePiece.push_back(activeSeg);
+ else
+ linePiece.push_front(activeSeg);
+ edgeSet.erase(activeSeg);
+ }
+
+ int ptId1 = d[dI[activeSeg]], ptId2 = d[dI[activeSeg]+1];
+ ptId = direction ? (ptId1 == prevPointId ? ptId2 : ptId1) : (ptId2 == prevPointId ? ptId1 : ptId2);
+ if (dsi[ptId] == 1) // hitting the end of the line
+ break;
+ prevPointId = ptId;
+ int seg1 = rD[rDI[ptId]], seg2 = rD[rDI[ptId]+1];
+ activeSeg = (seg1 == activeSeg) ? seg2 : seg1;
+ }
+ }
+ // Done, save final piece into DA:
+ std::copy(linePiece.begin(), linePiece.end(), result->getPointer()+newIdx);
+ newIdx += linePiece.size();
+
+ // identify next valid start segment (one which is not consumed)
+ if(!edgeSet.empty())
+ startSeg = *(edgeSet.begin());
+ }
+ while (!edgeSet.empty());
+ return result.retn();
+}
+
+/// @cond INTERNAL
+
+void IKGeo2DInternalMapper2(INTERP_KERNEL::Node *n, const std::map<MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node>,int>& m, int forbVal0, int forbVal1, std::vector<int>& isect)
+{
+ MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node> nTmp(n); nTmp->incrRef();
+ std::map<MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node>,int>::const_iterator it(m.find(nTmp));
+ if(it==m.end())
+ throw INTERP_KERNEL::Exception("Internal error in remapping !");
+ int v((*it).second);
+ if(v==forbVal0 || v==forbVal1)
+ return ;
+ if(std::find(isect.begin(),isect.end(),v)==isect.end())
+ isect.push_back(v);
+}
+
+bool IKGeo2DInternalMapper(const INTERP_KERNEL::ComposedEdge& c, const std::map<MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node>,int>& m, int forbVal0, int forbVal1, std::vector<int>& isect)
+{
+ int sz(c.size());
+ if(sz<=1)
+ return false;
+ bool presenceOfOn(false);
+ for(int i=0;i<sz;i++)
+ {
+ INTERP_KERNEL::ElementaryEdge *e(c[i]);
+ if(e->getLoc()!=INTERP_KERNEL::FULL_ON_1)
+ continue ;
+ IKGeo2DInternalMapper2(e->getStartNode(),m,forbVal0,forbVal1,isect);
+ IKGeo2DInternalMapper2(e->getEndNode(),m,forbVal0,forbVal1,isect);
+ }
+ return presenceOfOn;
+}
+
+/// @endcond
+
+/**
+ * This method split some of edges of 2D cells in \a this. The edges to be split are specified in \a subNodesInSeg and in \a subNodesInSegI using index storage mode.
+ * To do the work this method can optionally needs information about middle of subedges for quadratic cases if a minimal creation of new nodes is wanted.
+ * So this method try to reduce at most the number of new nodes. The only case that can lead this method to add nodes if a SEG3 is split without information of middle.
+ * \b WARNING : is returned value is different from 0 a call to MEDCouplingUMesh::mergeNodes is necessary to avoid to have a non conform mesh.
+ *
+ * \return int - the number of new nodes created (in most of cases 0).
+ *
+ * \throw If \a this is not coherent.
+ * \throw If \a this has not spaceDim equal to 2.
+ * \throw If \a this has not meshDim equal to 2.
+ * \throw If some subcells needed to be split are orphan.
+ * \sa MEDCouplingUMesh::conformize2D
+ */
+int MEDCouplingUMesh::split2DCells(const DataArrayInt *desc, const DataArrayInt *descI, const DataArrayInt *subNodesInSeg, const DataArrayInt *subNodesInSegI, const DataArrayInt *midOpt, const DataArrayInt *midOptI)
+{
+ if(!desc || !descI || !subNodesInSeg || !subNodesInSegI)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::split2DCells : the 4 first arrays must be not null !");
+ desc->checkAllocated(); descI->checkAllocated(); subNodesInSeg->checkAllocated(); subNodesInSegI->checkAllocated();
+ if(getSpaceDimension()!=2 || getMeshDimension()!=2)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::split2DCells : This method only works for meshes with spaceDim=2 and meshDim=2 !");
+ if(midOpt==0 && midOptI==0)
+ {
+ split2DCellsLinear(desc,descI,subNodesInSeg,subNodesInSegI);
+ return 0;
+ }
+ else if(midOpt!=0 && midOptI!=0)
+ return split2DCellsQuadratic(desc,descI,subNodesInSeg,subNodesInSegI,midOpt,midOptI);
+ else
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::split2DCells : middle parameters must be set to null for all or not null for all.");
+}
+
+/*!
+ * \b WARNING this method is \b potentially \b non \b const (if returned array is empty).
+ * \b WARNING this method lead to have a non geometric type sorted mesh (for MED file users) !
+ * This method performs a conformization of \b this. So if a edge in \a this can be split into entire edges in \a this this method
+ * will suppress such edges to use sub edges in \a this. So this method does not add nodes in \a this if merged edges are both linear (INTERP_KERNEL::NORM_SEG2).
+ * In the other cases new nodes can be created. If any are created, they will be appended at the end of the coordinates object before the invokation of this method.
+ *
+ * Whatever the returned value, this method does not alter the order of cells in \a this neither the orientation of cells.
+ * The modified cells, if any, are systematically declared as NORM_POLYGON or NORM_QPOLYG depending on the initial quadraticness of geometric type.
+ *
+ * This method expects that \b this has a meshDim equal 2 and spaceDim equal to 2 too.
+ * This method expects that all nodes in \a this are not closer than \a eps.
+ * If it is not the case you can invoke MEDCouplingUMesh::mergeNodes before calling this method.
+ *
+ * \param [in] eps the relative error to detect merged edges.
+ * \return DataArrayInt * - The list of cellIds in \a this that have been subdivided. If empty, nothing changed in \a this (as if it were a const method). The array is a newly allocated array
+ * that the user is expected to deal with.
+ *
+ * \throw If \a this is not coherent.
+ * \throw If \a this has not spaceDim equal to 2.
+ * \throw If \a this has not meshDim equal to 2.
+ * \sa MEDCouplingUMesh::mergeNodes, MEDCouplingUMesh::split2DCells
+ */
+DataArrayInt *MEDCouplingUMesh::conformize2D(double eps)
{
static const int SPACEDIM=2;
- // Build desc connectivity
- desc1=DataArrayInt::New(); descIndx1=DataArrayInt::New(); revDesc1=DataArrayInt::New(); revDescIndx1=DataArrayInt::New();
- desc2=DataArrayInt::New();
- descIndx2=DataArrayInt::New();
- revDesc2=DataArrayInt::New();
- revDescIndx2=DataArrayInt::New();
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> dd1(desc1),dd2(descIndx1),dd3(revDesc1),dd4(revDescIndx1);
- MEDCouplingAutoRefCountObjectPtr<DataArrayInt> dd5(desc2),dd6(descIndx2),dd7(revDesc2),dd8(revDescIndx2);
- m1Desc=m1->buildDescendingConnectivity2(desc1,descIndx1,revDesc1,revDescIndx1);
- m2Desc=m2->buildDescendingConnectivity2(desc2,descIndx2,revDesc2,revDescIndx2);
- MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> dd9(m1Desc),dd10(m2Desc);
- const int *c1=m1Desc->getNodalConnectivity()->getConstPointer();
- const int *ci1=m1Desc->getNodalConnectivityIndex()->getConstPointer();
+ checkCoherency();
+ if(getSpaceDimension()!=2 || getMeshDimension()!=2)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::conformize2D : This method only works for meshes with spaceDim=2 and meshDim=2 !");
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> desc1(DataArrayInt::New()),descIndx1(DataArrayInt::New()),revDesc1(DataArrayInt::New()),revDescIndx1(DataArrayInt::New());
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> mDesc(buildDescendingConnectivity(desc1,descIndx1,revDesc1,revDescIndx1));
+ const int *c(mDesc->getNodalConnectivity()->getConstPointer()),*ci(mDesc->getNodalConnectivityIndex()->getConstPointer()),*rd(revDesc1->getConstPointer()),*rdi(revDescIndx1->getConstPointer());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> bboxArr(mDesc->getBoundingBoxForBBTree());
+ const double *bbox(bboxArr->begin()),*coords(getCoords()->begin());
+ int nCell(getNumberOfCells()),nDescCell(mDesc->getNumberOfCells());
+ std::vector< std::vector<int> > intersectEdge(nDescCell),overlapEdge(nDescCell);
+ std::vector<double> addCoo;
+ BBTree<SPACEDIM,int> myTree(bbox,0,0,nDescCell,-eps);
+ INTERP_KERNEL::QUADRATIC_PLANAR::_precision=eps;
+ INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=eps;
+ for(int i=0;i<nDescCell;i++)
+ {
+ std::vector<int> candidates;
+ myTree.getIntersectingElems(bbox+i*2*SPACEDIM,candidates);
+ for(std::vector<int>::const_iterator it=candidates.begin();it!=candidates.end();it++)
+ if(*it>i)
+ {
+ std::map<MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node>,int> m;
+ INTERP_KERNEL::Edge *e1(MEDCouplingUMeshBuildQPFromEdge2((INTERP_KERNEL::NormalizedCellType)c[ci[i]],c+ci[i]+1,coords,m)),
+ *e2(MEDCouplingUMeshBuildQPFromEdge2((INTERP_KERNEL::NormalizedCellType)c[ci[*it]],c+ci[*it]+1,coords,m));
+ INTERP_KERNEL::MergePoints merge;
+ INTERP_KERNEL::QuadraticPolygon c1,c2;
+ e1->intersectWith(e2,merge,c1,c2);
+ e1->decrRef(); e2->decrRef();
+ if(IKGeo2DInternalMapper(c1,m,c[ci[i]+1],c[ci[i]+2],intersectEdge[i]))
+ overlapEdge[i].push_back(*it);
+ if(IKGeo2DInternalMapper(c2,m,c[ci[*it]+1],c[ci[*it]+2],intersectEdge[*it]))
+ overlapEdge[*it].push_back(i);
+ }
+ }
+ // splitting done. sort intersect point in intersectEdge.
+ std::vector< std::vector<int> > middle(nDescCell);
+ int nbOf2DCellsToBeSplit(0);
+ bool middleNeedsToBeUsed(false);
+ std::vector<bool> cells2DToTreat(nDescCell,false);
+ for(int i=0;i<nDescCell;i++)
+ {
+ std::vector<int>& isect(intersectEdge[i]);
+ int sz((int)isect.size());
+ if(sz>1)
+ {
+ std::map<MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node>,int> m;
+ INTERP_KERNEL::Edge *e(MEDCouplingUMeshBuildQPFromEdge2((INTERP_KERNEL::NormalizedCellType)c[ci[i]],c+ci[i]+1,coords,m));
+ e->sortSubNodesAbs(coords,isect);
+ e->decrRef();
+ }
+ if(sz!=0)
+ {
+ int idx0(rdi[i]),idx1(rdi[i+1]);
+ if(idx1-idx0!=1)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::conformize2D : internal error #0 !");
+ if(!cells2DToTreat[rd[idx0]])
+ {
+ cells2DToTreat[rd[idx0]]=true;
+ nbOf2DCellsToBeSplit++;
+ }
+ // try to reuse at most eventual 'middle' of SEG3
+ std::vector<int>& mid(middle[i]);
+ mid.resize(sz+1,-1);
+ if((INTERP_KERNEL::NormalizedCellType)c[ci[i]]==INTERP_KERNEL::NORM_SEG3)
+ {
+ middleNeedsToBeUsed=true;
+ const std::vector<int>& candidates(overlapEdge[i]);
+ std::vector<int> trueCandidates;
+ for(std::vector<int>::const_iterator itc=candidates.begin();itc!=candidates.end();itc++)
+ if((INTERP_KERNEL::NormalizedCellType)c[ci[*itc]]==INTERP_KERNEL::NORM_SEG3)
+ trueCandidates.push_back(*itc);
+ int stNode(c[ci[i]+1]),endNode(isect[0]);
+ for(int j=0;j<sz+1;j++)
+ {
+ for(std::vector<int>::const_iterator itc=trueCandidates.begin();itc!=trueCandidates.end();itc++)
+ {
+ int tmpSt(c[ci[*itc]+1]),tmpEnd(c[ci[*itc]+2]);
+ if((tmpSt==stNode && tmpEnd==endNode) || (tmpSt==endNode && tmpEnd==stNode))
+ { mid[j]=*itc; break; }
+ }
+ stNode=endNode;
+ endNode=j<sz-1?isect[j+1]:c[ci[i]+2];
+ }
+ }
+ }
+ }
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret(DataArrayInt::New()),notRet(DataArrayInt::New()); ret->alloc(nbOf2DCellsToBeSplit,1);
+ if(nbOf2DCellsToBeSplit==0)
+ return ret.retn();
+ //
+ int *retPtr(ret->getPointer());
+ for(int i=0;i<nCell;i++)
+ if(cells2DToTreat[i])
+ *retPtr++=i;
+ //
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> mSafe,nSafe,oSafe,pSafe,qSafe,rSafe;
+ DataArrayInt *m(0),*n(0),*o(0),*p(0),*q(0),*r(0);
+ MEDCouplingUMesh::ExtractFromIndexedArrays(ret->begin(),ret->end(),desc1,descIndx1,m,n); mSafe=m; nSafe=n;
+ DataArrayInt::PutIntoToSkylineFrmt(intersectEdge,o,p); oSafe=o; pSafe=p;
+ if(middleNeedsToBeUsed)
+ { DataArrayInt::PutIntoToSkylineFrmt(middle,q,r); qSafe=q; rSafe=r; }
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> modif(static_cast<MEDCouplingUMesh *>(buildPartOfMySelf(ret->begin(),ret->end(),true)));
+ int nbOfNodesCreated(modif->split2DCells(mSafe,nSafe,oSafe,pSafe,qSafe,rSafe));
+ setCoords(modif->getCoords());//if nbOfNodesCreated==0 modif and this have the same coordinates pointer so this line has no effect. But for quadratic cases this line is important.
+ setPartOfMySelf(ret->begin(),ret->end(),*modif);
+ {
+ bool areNodesMerged; int newNbOfNodes;
+ if(nbOfNodesCreated!=0)
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> tmp(mergeNodes(eps,areNodesMerged,newNbOfNodes));
+ }
+ return ret.retn();
+}
+
+/*!
+ * This non const method works on 2D mesh. This method scans every cell in \a this and look if each edge constituting this cell is not mergeable with neighbors edges of that cell.
+ * If yes, the cell is "repaired" to minimize at most its number of edges. So this method do not change the overall shape of cells in \a this (with eps precision).
+ * This method do not take care of shared edges between cells, so this method can lead to a non conform mesh (\a this). If a conform mesh is required you're expected
+ * to invoke MEDCouplingUMesh::mergeNodes and MEDCouplingUMesh::conformize2D right after this call.
+ * This method works on any 2D geometric types of cell (even static one). If a cell is touched its type becomes dynamic automaticaly. For 2D "repaired" quadratic cells
+ * new nodes for center of merged edges is are systematically created and appended at the end of the previously existing nodes.
+ *
+ * If the returned array is empty it means that nothing has changed in \a this (as if it were a const method). If the array is not empty the connectivity of \a this is modified
+ * using new instance, idem for coordinates.
+ *
+ * If \a this is constituted by only linear 2D cells, this method is close to the computation of the convex hull of each cells in \a this.
+ *
+ * \return DataArrayInt * - The list of cellIds in \a this that have at least one edge colinearized.
+ *
+ * \throw If \a this is not coherent.
+ * \throw If \a this has not spaceDim equal to 2.
+ * \throw If \a this has not meshDim equal to 2.
+ *
+ * \sa MEDCouplingUMesh::conformize2D, MEDCouplingUMesh::mergeNodes, MEDCouplingUMesh::convexEnvelop2D.
+ */
+DataArrayInt *MEDCouplingUMesh::colinearize2D(double eps)
+{
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> ret(DataArrayInt::New()); ret->alloc(0,1);
+ checkCoherency();
+ if(getSpaceDimension()!=2 || getMeshDimension()!=2)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::colinearize2D : This method only works for meshes with spaceDim=2 and meshDim=2 !");
+ INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=eps;
+ INTERP_KERNEL::QUADRATIC_PLANAR::_precision=eps;
+ int nbOfCells(getNumberOfCells()),nbOfNodes(getNumberOfNodes());
+ const int *cptr(_nodal_connec->begin()),*ciptr(_nodal_connec_index->begin());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> newc(DataArrayInt::New()),newci(DataArrayInt::New()); newci->alloc(nbOfCells+1,1); newc->alloc(0,1); newci->setIJ(0,0,0);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> appendedCoords(DataArrayDouble::New()); appendedCoords->alloc(0,1);//1 not 2 it is not a bug.
+ const double *coords(_coords->begin());
+ int *newciptr(newci->getPointer());
+ for(int i=0;i<nbOfCells;i++,newciptr++,ciptr++)
+ {
+ if(Colinearize2DCell(coords,cptr+ciptr[0],cptr+ciptr[1],nbOfNodes,newc,appendedCoords))
+ ret->pushBackSilent(i);
+ newciptr[1]=newc->getNumberOfTuples();
+ }
+ //
+ if(ret->empty())
+ return ret.retn();
+ if(!appendedCoords->empty())
+ {
+ appendedCoords->rearrange(2);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> newCoords(DataArrayDouble::Aggregate(getCoords(),appendedCoords));//treat info on components
+ //non const part
+ setCoords(newCoords);
+ }
+ //non const part
+ setConnectivity(newc,newci,true);
+ return ret.retn();
+}
+/*!
+ * \param [out] intersectEdge1 - for each cell in \a m1Desc returns the result of the split. The result is given using pair of int given resp start and stop.
+ * So for all edge \a i in \a m1Desc \a intersectEdge1[i] is of length 2*n where n is the number of sub edges.
+ * And for each j in [1,n) intersect[i][2*(j-1)+1]==intersect[i][2*j].
+ * \param [out] subDiv2 - for each cell in \a m2Desc returns nodes that split it using convention \a m1Desc first, then \a m2Desc, then addCoo
+ * \param [out] colinear2 - for each cell in \a m2Desc returns the edges in \a m1Desc that are colinear to it.
+ * \param [out] addCoo - nodes to be append at the end
+ * \param [out] mergedNodes - gives all pair of nodes of \a m2Desc that have same location than some nodes in \a m1Desc. key is id in \a m2Desc offseted and value is id in \a m1Desc.
+ */
+void MEDCouplingUMesh::Intersect1DMeshes(const MEDCouplingUMesh *m1Desc, const MEDCouplingUMesh *m2Desc, double eps,
+ std::vector< std::vector<int> >& intersectEdge1, std::vector< std::vector<int> >& colinear2, std::vector< std::vector<int> >& subDiv2, std::vector<double>& addCoo, std::map<int,int>& mergedNodes)
+{
+ static const int SPACEDIM=2;
+ INTERP_KERNEL::QUADRATIC_PLANAR::_precision=eps;
+ INTERP_KERNEL::QUADRATIC_PLANAR::_arc_detection_precision=eps;
+ const int *c1(m1Desc->getNodalConnectivity()->getConstPointer()),*ci1(m1Desc->getNodalConnectivityIndex()->getConstPointer());
// Build BB tree of all edges in the tool mesh (second mesh)
MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> bbox1Arr(m1Desc->getBoundingBoxForBBTree()),bbox2Arr(m2Desc->getBoundingBoxForBBTree());
const double *bbox1(bbox1Arr->begin()),*bbox2(bbox2Arr->begin());
- int nDescCell1=m1Desc->getNumberOfCells();
- int nDescCell2=m2Desc->getNumberOfCells();
+ int nDescCell1(m1Desc->getNumberOfCells()),nDescCell2(m2Desc->getNumberOfCells());
intersectEdge1.resize(nDescCell1);
colinear2.resize(nDescCell2);
subDiv2.resize(nDescCell2);
BBTree<SPACEDIM,int> myTree(bbox2,0,0,m2Desc->getNumberOfCells(),-eps);
std::vector<int> candidates1(1);
- int offset1=m1->getNumberOfNodes();
- int offset2=offset1+m2->getNumberOfNodes();
+ int offset1(m1Desc->getNumberOfNodes());
+ int offset2(offset1+m2Desc->getNumberOfNodes());
for(int i=0;i<nDescCell1;i++) // for all edges in the first mesh
{
std::vector<int> candidates2; // edges of mesh2 candidate for intersection
{ (*itt)->incrRef(); nodesSafe[iii]=*itt; }
// end of protection
// Performs egde cutting:
- pol1->splitAbs(*pol2,map1,map2,offset1,offset2,candidates2,intersectEdge1[i],i,colinear2,subDiv2,addCoo);
+ pol1->splitAbs(*pol2,map1,map2,offset1,offset2,candidates2,intersectEdge1[i],i,colinear2,subDiv2,addCoo,mergedNodes);
delete pol2;
delete pol1;
}
else
- intersectEdge1[i].insert(intersectEdge1[i].end(),c1+ci1[i]+1,c1+ci1[i+1]);
+ // Copy the edge (take only the two first points, ie discard quadratic point at this stage)
+ intersectEdge1[i].insert(intersectEdge1[i].end(),c1+ci1[i]+1,c1+ci1[i]+3);
}
+}
+
+/*!
+ * This method is private and is the first step of Partition of 2D mesh (spaceDim==2 and meshDim==2).
+ * It builds the descending connectivity of the two meshes, and then using a binary tree
+ * it computes the edge intersections. This results in new points being created : they're stored in addCoo.
+ * Documentation about parameters colinear2 and subDiv2 can be found in method QuadraticPolygon::splitAbs().
+ */
+void MEDCouplingUMesh::IntersectDescending2DMeshes(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2, double eps,
+ std::vector< std::vector<int> >& intersectEdge1, std::vector< std::vector<int> >& colinear2, std::vector< std::vector<int> >& subDiv2,
+ MEDCouplingUMesh *& m1Desc, DataArrayInt *&desc1, DataArrayInt *&descIndx1, DataArrayInt *&revDesc1, DataArrayInt *&revDescIndx1,
+ std::vector<double>& addCoo,
+ MEDCouplingUMesh *& m2Desc, DataArrayInt *&desc2, DataArrayInt *&descIndx2, DataArrayInt *&revDesc2, DataArrayInt *&revDescIndx2)
+{
+ // Build desc connectivity
+ desc1=DataArrayInt::New(); descIndx1=DataArrayInt::New(); revDesc1=DataArrayInt::New(); revDescIndx1=DataArrayInt::New();
+ desc2=DataArrayInt::New();
+ descIndx2=DataArrayInt::New();
+ revDesc2=DataArrayInt::New();
+ revDescIndx2=DataArrayInt::New();
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> dd1(desc1),dd2(descIndx1),dd3(revDesc1),dd4(revDescIndx1);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> dd5(desc2),dd6(descIndx2),dd7(revDesc2),dd8(revDescIndx2);
+ m1Desc=m1->buildDescendingConnectivity2(desc1,descIndx1,revDesc1,revDescIndx1);
+ m2Desc=m2->buildDescendingConnectivity2(desc2,descIndx2,revDesc2,revDescIndx2);
+ MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> dd9(m1Desc),dd10(m2Desc);
+ std::map<int,int> notUsedMap;
+ Intersect1DMeshes(m1Desc,m2Desc,eps,intersectEdge1,colinear2,subDiv2,addCoo,notUsedMap);
m1Desc->incrRef(); desc1->incrRef(); descIndx1->incrRef(); revDesc1->incrRef(); revDescIndx1->incrRef();
m2Desc->incrRef(); desc2->incrRef(); descIndx2->incrRef(); revDesc2->incrRef(); revDescIndx2->incrRef();
}
* \param[out] intersectEdge the same content as subDiv, but correclty oriented.
*/
void MEDCouplingUMesh::BuildIntersectEdges(const MEDCouplingUMesh *m1, const MEDCouplingUMesh *m2,
- const std::vector<double>& addCoo,
- const std::vector< std::vector<int> >& subDiv, std::vector< std::vector<int> >& intersectEdge)
+ const std::vector<double>& addCoo,
+ const std::vector< std::vector<int> >& subDiv, std::vector< std::vector<int> >& intersectEdge)
{
int offset1=m1->getNumberOfNodes();
int ncell=m2->getNumberOfCells();
void MEDCouplingUMesh::AssemblyForSplitFrom3DCurve(const std::vector<int>& cut3DCurve, std::vector<int>& nodesOnPlane, const int *nodal3DSurf, const int *nodalIndx3DSurf,
const int *nodal3DCurve, const int *nodalIndx3DCurve,
const int *desc, const int *descIndx,
- std::vector< std::pair<int,int> >& cut3DSurf) throw(INTERP_KERNEL::Exception)
+ std::vector< std::pair<int,int> >& cut3DSurf)
{
std::set<int> nodesOnP(nodesOnPlane.begin(),nodesOnPlane.end());
int nbOf3DSurfCell=(int)cut3DSurf.size();
}
}
switch(res.size())
- {
+ {
case 2:
{
cut3DSurf[i].first=res[0]; cut3DSurf[i].second=res[1];
else
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::AssemblyPointsFrom3DCurve : unexpected situation !");
}
- }
+ }
}
}
*/
void MEDCouplingUMesh::assemblyForSplitFrom3DSurf(const std::vector< std::pair<int,int> >& cut3DSurf,
const int *desc, const int *descIndx,
- DataArrayInt *nodalRes, DataArrayInt *nodalResIndx, DataArrayInt *cellIds) const throw(INTERP_KERNEL::Exception)
+ DataArrayInt *nodalRes, DataArrayInt *nodalResIndx, DataArrayInt *cellIds) const
{
checkFullyDefined();
if(getMeshDimension()!=3 || getSpaceDimension()!=3)
* \sa MEDCouplingUMesh::ExtractFromIndexedArrays2
*/
void MEDCouplingUMesh::ExtractFromIndexedArrays(const int *idsOfSelectBg, const int *idsOfSelectEnd, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception)
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut)
{
if(!arrIn || !arrIndxIn)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::ExtractFromIndexedArrays : input pointer is NULL !");
* \sa MEDCouplingUMesh::ExtractFromIndexedArrays
*/
void MEDCouplingUMesh::ExtractFromIndexedArrays2(int idsOfSelectStart, int idsOfSelectStop, int idsOfSelectStep, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception)
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut)
{
if(!arrIn || !arrIndxIn)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::ExtractFromIndexedArrays2 : input pointer is NULL !");
*/
void MEDCouplingUMesh::SetPartOfIndexedArrays(const int *idsOfSelectBg, const int *idsOfSelectEnd, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception)
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut)
{
if(arrIn==0 || arrIndxIn==0 || srcArr==0 || srcArrIndex==0)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::SetPartOfIndexedArrays : presence of null pointer in input parameter !");
* \sa MEDCouplingUMesh::SetPartOfIndexedArrays
*/
void MEDCouplingUMesh::SetPartOfIndexedArraysSameIdx(const int *idsOfSelectBg, const int *idsOfSelectEnd, DataArrayInt *arrInOut, const DataArrayInt *arrIndxIn,
- const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex) throw(INTERP_KERNEL::Exception)
+ const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex)
{
if(arrInOut==0 || arrIndxIn==0 || srcArr==0 || srcArrIndex==0)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::SetPartOfIndexedArraysSameIdx : presence of null pointer in input parameter !");
*/
void MEDCouplingUMesh::SetPartOfIndexedArrays2(int start, int end, int step, const DataArrayInt *arrIn, const DataArrayInt *arrIndxIn,
const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex,
- DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut) throw(INTERP_KERNEL::Exception)
+ DataArrayInt* &arrOut, DataArrayInt* &arrIndexOut)
{
if(arrIn==0 || arrIndxIn==0 || srcArr==0 || srcArrIndex==0)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::SetPartOfIndexedArrays2 : presence of null pointer in input parameter !");
* \sa MEDCouplingUMesh::SetPartOfIndexedArrays2 MEDCouplingUMesh::SetPartOfIndexedArraysSameIdx
*/
void MEDCouplingUMesh::SetPartOfIndexedArraysSameIdx2(int start, int end, int step, DataArrayInt *arrInOut, const DataArrayInt *arrIndxIn,
- const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex) throw(INTERP_KERNEL::Exception)
+ const DataArrayInt *srcArr, const DataArrayInt *srcArrIndex)
{
if(arrInOut==0 || arrIndxIn==0 || srcArr==0 || srcArrIndex==0)
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::SetPartOfIndexedArraysSameIdx2 : presence of null pointer in input parameter !");
MEDCouplingAutoRefCountObjectPtr<MEDCouplingUMesh> tmp=static_cast<MEDCouplingUMesh *>(buildPartOfMySelf((*it)->begin(),(*it)->end(),true));
MEDCouplingAutoRefCountObjectPtr<DataArrayInt> cell;
switch(mdim)
- {
+ {
case 2:
cell=tmp->buildUnionOf2DMesh();
break;
break;
default:
throw INTERP_KERNEL::Exception("MEDCouplingUMesh::buildSpreadZonesWithPoly : meshdimension supported are [2,3] ! Not implemented yet for others !");
- }
-
+ }
+
ret->insertNextCell((INTERP_KERNEL::NormalizedCellType)cell->getIJSafe(0,0),cell->getNumberOfTuples()-1,cell->getConstPointer()+1);
}
//
return ret0.retn();
}
+/*!
+ * It is the linear part of MEDCouplingUMesh::split2DCells. Here no additionnal nodes will be added in \b this. So coordinates pointer remain unchanged (is not even touch).
+ *
+ * \sa MEDCouplingUMesh::split2DCells
+ */
+void MEDCouplingUMesh::split2DCellsLinear(const DataArrayInt *desc, const DataArrayInt *descI, const DataArrayInt *subNodesInSeg, const DataArrayInt *subNodesInSegI)
+{
+ checkConnectivityFullyDefined();
+ int ncells(getNumberOfCells()),lgthToReach(getMeshLength()+subNodesInSeg->getNumberOfTuples());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> c(DataArrayInt::New()); c->alloc((std::size_t)lgthToReach);
+ const int *subPtr(subNodesInSeg->begin()),*subIPtr(subNodesInSegI->begin()),*descPtr(desc->begin()),*descIPtr(descI->begin()),*oldConn(getNodalConnectivity()->begin());
+ int *cPtr(c->getPointer()),*ciPtr(getNodalConnectivityIndex()->getPointer());
+ int prevPosOfCi(ciPtr[0]);
+ for(int i=0;i<ncells;i++,ciPtr++,descIPtr++)
+ {
+ int offset(descIPtr[0]),sz(descIPtr[1]-descIPtr[0]),deltaSz(0);
+ *cPtr++=(int)INTERP_KERNEL::NORM_POLYGON; *cPtr++=oldConn[prevPosOfCi+1];
+ for(int j=0;j<sz;j++)
+ {
+ int offset2(subIPtr[descPtr[offset+j]]),sz2(subIPtr[descPtr[offset+j]+1]-subIPtr[descPtr[offset+j]]);
+ for(int k=0;k<sz2;k++)
+ *cPtr++=subPtr[offset2+k];
+ if(j!=sz-1)
+ *cPtr++=oldConn[prevPosOfCi+j+2];
+ deltaSz+=sz2;
+ }
+ prevPosOfCi=ciPtr[1];
+ ciPtr[1]=ciPtr[0]+1+sz+deltaSz;//sz==old nb of nodes because (nb of subedges=nb of nodes for polygons)
+ }
+ if(c->end()!=cPtr)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::split2DCellsLinear : Some of edges to be split are orphan !");
+ _nodal_connec->decrRef();
+ _nodal_connec=c.retn(); _types.clear(); _types.insert(INTERP_KERNEL::NORM_POLYGON);
+}
+
+int InternalAddPoint(const INTERP_KERNEL::Edge *e, int id, const double *coo, int startId, int endId, DataArrayDouble& addCoo, int& nodesCnter)
+{
+ if(id!=-1)
+ return id;
+ else
+ {
+ int ret(nodesCnter++);
+ double newPt[2];
+ e->getMiddleOfPoints(coo+2*startId,coo+2*endId,newPt);
+ addCoo.insertAtTheEnd(newPt,newPt+2);
+ return ret;
+ }
+}
+
+/// @cond INTERNAL
+
+void EnterTheResultOf2DCellFirst(const INTERP_KERNEL::Edge *e, int start, int stp, int nbOfEdges, bool linOrArc, const double *coords, const int *connBg, int offset, DataArrayInt *newConnOfCell, DataArrayDouble *appendedCoords, std::vector<int>& middles)
+{
+ int tmp[3];
+ int trueStart(start>=0?start:nbOfEdges+start);
+ tmp[0]=linOrArc?(int)INTERP_KERNEL::NORM_QPOLYG:(int)INTERP_KERNEL::NORM_POLYGON; tmp[1]=connBg[trueStart]; tmp[2]=connBg[stp];
+ newConnOfCell->insertAtTheEnd(tmp,tmp+3);
+ if(linOrArc)
+ {
+ if(stp-start>1)
+ {
+ int tmp2(0),tmp3(appendedCoords->getNumberOfTuples()/2);
+ InternalAddPoint(e,-1,coords,tmp[1],tmp[2],*appendedCoords,tmp2);
+ middles.push_back(tmp3+offset);
+ }
+ else
+ middles.push_back(connBg[trueStart+nbOfEdges]);
+ }
+}
+
+void EnterTheResultOf2DCellMiddle(const INTERP_KERNEL::Edge *e, int start, int stp, int nbOfEdges, bool linOrArc, const double *coords, const int *connBg, int offset, DataArrayInt *newConnOfCell, DataArrayDouble *appendedCoords, std::vector<int>& middles)
+{
+ int tmpSrt(newConnOfCell->back()),tmpEnd(connBg[stp]);
+ newConnOfCell->pushBackSilent(tmpEnd);
+ if(linOrArc)
+ {
+ if(stp-start>1)
+ {
+ int tmp2(0),tmp3(appendedCoords->getNumberOfTuples()/2);
+ InternalAddPoint(e,-1,coords,tmpSrt,tmpEnd,*appendedCoords,tmp2);
+ middles.push_back(tmp3+offset);
+ }
+ else
+ middles.push_back(connBg[start+nbOfEdges]);
+ }
+}
+
+void EnterTheResultOf2DCellEnd(const INTERP_KERNEL::Edge *e, int start, int stp, int nbOfEdges, bool linOrArc, const double *coords, const int *connBg, int offset, DataArrayInt *newConnOfCell, DataArrayDouble *appendedCoords, std::vector<int>& middles)
+{
+ if(linOrArc)
+ {
+ if(stp-start>1)
+ {
+ int tmpSrt(connBg[start]),tmpEnd(connBg[stp]);
+ int tmp2(0),tmp3(appendedCoords->getNumberOfTuples()/2);
+ InternalAddPoint(e,-1,coords,tmpSrt,tmpEnd,*appendedCoords,tmp2);
+ middles.push_back(tmp3+offset);
+ }
+ else
+ middles.push_back(connBg[start+nbOfEdges]);
+ }
+}
+
+/// @cond INTERNAL
+
+/*!
+ * Returns true if a colinearization has been found in the given cell. If false is returned the content pushed in \a newConnOfCell is equal to [ \a connBg , \a connEnd ) .
+ * \a appendedCoords is a DataArrayDouble instance with number of components equal to one (even if the items are pushed by pair).
+ */
+bool MEDCouplingUMesh::Colinearize2DCell(const double *coords, const int *connBg, const int *connEnd, int offset, DataArrayInt *newConnOfCell, DataArrayDouble *appendedCoords)
+{
+ std::size_t sz(std::distance(connBg,connEnd));
+ if(sz<3)//3 because 2+1(for the cell type) and 2 is the minimal number of edges of 2D cell.
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::Colinearize2DCell : the input cell has invalid format !");
+ sz--;
+ INTERP_KERNEL::AutoPtr<int> tmpConn(new int[sz]);
+ const INTERP_KERNEL::CellModel& cm(INTERP_KERNEL::CellModel::GetCellModel((INTERP_KERNEL::NormalizedCellType)connBg[0]));
+ unsigned nbs(cm.getNumberOfSons2(connBg+1,sz)),nbOfHit(0);
+ int posBaseElt(0),posEndElt(0),nbOfTurn(0);
+ INTERP_KERNEL::NormalizedCellType typeOfSon;
+ std::vector<int> middles;
+ bool ret(false);
+ for(;nbOfHit<nbs;nbOfTurn++)
+ {
+ cm.fillSonCellNodalConnectivity2(posBaseElt,connBg+1,sz,tmpConn,typeOfSon);
+ std::map<MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Node>,int> m;
+ INTERP_KERNEL::Edge *e(MEDCouplingUMeshBuildQPFromEdge2(typeOfSon,tmpConn,coords,m));
+ posEndElt++;
+ nbOfHit++;
+ unsigned endI(nbs-nbOfHit);
+ for(unsigned i=0;i<endI;i++)
+ {
+ cm.fillSonCellNodalConnectivity2(posBaseElt+(int)i+1,connBg+1,sz,tmpConn,typeOfSon);
+ INTERP_KERNEL::Edge *eCand(MEDCouplingUMeshBuildQPFromEdge2(typeOfSon,tmpConn,coords,m));
+ INTERP_KERNEL::EdgeIntersector *eint(INTERP_KERNEL::Edge::BuildIntersectorWith(e,eCand));
+ bool isColinear(eint->areColinears());
+ if(isColinear)
+ {
+ nbOfHit++;
+ posEndElt++;
+ ret=true;
+ }
+ delete eint;
+ eCand->decrRef();
+ if(!isColinear)
+ {
+ if(nbOfTurn==0)
+ {//look if the first edge of cell is not colinear with last edges in this case the start of nodal connectivity is shifted back
+ unsigned endII(nbs-nbOfHit-1);//warning nbOfHit can be modified, so put end condition in a variable.
+ for(unsigned ii=0;ii<endII;ii++)
+ {
+ cm.fillSonCellNodalConnectivity2(nbs-ii-1,connBg+1,sz,tmpConn,typeOfSon);
+ eCand=MEDCouplingUMeshBuildQPFromEdge2(typeOfSon,tmpConn,coords,m);
+ eint=INTERP_KERNEL::Edge::BuildIntersectorWith(e,eCand);
+ isColinear=eint->areColinears();
+ if(isColinear)
+ {
+ nbOfHit++;
+ posBaseElt--;
+ ret=true;
+ }
+ delete eint;
+ eCand->decrRef();
+ if(!isColinear)
+ break;
+ }
+ }
+ break;
+ }
+ }
+ //push [posBaseElt,posEndElt) in newConnOfCell using e
+ if(nbOfTurn==0)
+ EnterTheResultOf2DCellFirst(e,posBaseElt,posEndElt,(int)nbs,cm.isQuadratic(),coords,connBg+1,offset,newConnOfCell,appendedCoords,middles);
+ else if(nbOfHit!=nbs)
+ EnterTheResultOf2DCellMiddle(e,posBaseElt,posEndElt,(int)nbs,cm.isQuadratic(),coords,connBg+1,offset,newConnOfCell,appendedCoords,middles);
+ else
+ EnterTheResultOf2DCellEnd(e,posBaseElt,posEndElt,(int)nbs,cm.isQuadratic(),coords,connBg+1,offset,newConnOfCell,appendedCoords,middles);
+ posBaseElt=posEndElt;
+ e->decrRef();
+ }
+ if(!middles.empty())
+ newConnOfCell->insertAtTheEnd(middles.begin(),middles.end());
+ return ret;
+}
+
+/*!
+ * It is the quadratic part of MEDCouplingUMesh::split2DCells. Here some additionnal nodes can be added at the end of coordinates array object.
+ *
+ * \return int - the number of new nodes created.
+ * \sa MEDCouplingUMesh::split2DCells
+ */
+int MEDCouplingUMesh::split2DCellsQuadratic(const DataArrayInt *desc, const DataArrayInt *descI, const DataArrayInt *subNodesInSeg, const DataArrayInt *subNodesInSegI, const DataArrayInt *mid, const DataArrayInt *midI)
+{
+ checkCoherency();
+ int ncells(getNumberOfCells()),lgthToReach(getMeshLength()+2*subNodesInSeg->getNumberOfTuples()),nodesCnt(getNumberOfNodes());
+ MEDCouplingAutoRefCountObjectPtr<DataArrayInt> c(DataArrayInt::New()); c->alloc((std::size_t)lgthToReach);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> addCoo(DataArrayDouble::New()); addCoo->alloc(0,1);
+ const int *subPtr(subNodesInSeg->begin()),*subIPtr(subNodesInSegI->begin()),*descPtr(desc->begin()),*descIPtr(descI->begin()),*oldConn(getNodalConnectivity()->begin());
+ const int *midPtr(mid->begin()),*midIPtr(midI->begin());
+ const double *oldCoordsPtr(getCoords()->begin());
+ int *cPtr(c->getPointer()),*ciPtr(getNodalConnectivityIndex()->getPointer());
+ int prevPosOfCi(ciPtr[0]);
+ for(int i=0;i<ncells;i++,ciPtr++,descIPtr++)
+ {
+ int offset(descIPtr[0]),sz(descIPtr[1]-descIPtr[0]),deltaSz(sz);
+ for(int j=0;j<sz;j++)
+ { int sz2(subIPtr[descPtr[offset+j]+1]-subIPtr[descPtr[offset+j]]); deltaSz+=sz2; }
+ *cPtr++=(int)INTERP_KERNEL::NORM_QPOLYG; cPtr[0]=oldConn[prevPosOfCi+1];
+ for(int j=0;j<sz;j++)//loop over subedges of oldConn
+ {
+ int offset2(subIPtr[descPtr[offset+j]]),sz2(subIPtr[descPtr[offset+j]+1]-subIPtr[descPtr[offset+j]]),offset3(midIPtr[descPtr[offset+j]]);
+ if(sz2==0)
+ {
+ if(j<sz-1)
+ cPtr[1]=oldConn[prevPosOfCi+2+j];
+ cPtr[deltaSz]=oldConn[prevPosOfCi+1+j+sz]; cPtr++;
+ continue;
+ }
+ std::vector<INTERP_KERNEL::Node *> ns(3);
+ ns[0]=new INTERP_KERNEL::Node(oldCoordsPtr[2*oldConn[prevPosOfCi+1+j]],oldCoordsPtr[2*oldConn[prevPosOfCi+1+j]+1]);
+ ns[1]=new INTERP_KERNEL::Node(oldCoordsPtr[2*oldConn[prevPosOfCi+1+(1+j)%sz]],oldCoordsPtr[2*oldConn[prevPosOfCi+1+(1+j)%sz]+1]);
+ ns[2]=new INTERP_KERNEL::Node(oldCoordsPtr[2*oldConn[prevPosOfCi+1+sz+j]],oldCoordsPtr[2*oldConn[prevPosOfCi+1+sz+j]+1]);
+ MEDCouplingAutoRefCountObjectPtr<INTERP_KERNEL::Edge> e(INTERP_KERNEL::QuadraticPolygon::BuildArcCircleEdge(ns));
+ for(int k=0;k<sz2;k++)//loop over subsplit of current subedge
+ {
+ cPtr[1]=subPtr[offset2+k];
+ cPtr[deltaSz]=InternalAddPoint(e,midPtr[offset3+k],oldCoordsPtr,cPtr[0],cPtr[1],*addCoo,nodesCnt); cPtr++;
+ }
+ int tmpEnd(oldConn[prevPosOfCi+1+(j+1)%sz]);
+ if(j!=sz-1)
+ { cPtr[1]=tmpEnd; }
+ cPtr[deltaSz]=InternalAddPoint(e,midPtr[offset3+sz2],oldCoordsPtr,cPtr[0],tmpEnd,*addCoo,nodesCnt); cPtr++;
+ }
+ prevPosOfCi=ciPtr[1]; cPtr+=deltaSz;
+ ciPtr[1]=ciPtr[0]+1+2*deltaSz;//sz==old nb of nodes because (nb of subedges=nb of nodes for polygons)
+ }
+ if(c->end()!=cPtr)
+ throw INTERP_KERNEL::Exception("MEDCouplingUMesh::split2DCellsQuadratic : Some of edges to be split are orphan !");
+ _nodal_connec->decrRef();
+ _nodal_connec=c.retn(); _types.clear(); _types.insert(INTERP_KERNEL::NORM_QPOLYG);
+ addCoo->rearrange(2);
+ MEDCouplingAutoRefCountObjectPtr<DataArrayDouble> coo(DataArrayDouble::Aggregate(getCoords(),addCoo));//info are copied from getCoords() by using Aggregate
+ setCoords(coo);
+ return addCoo->getNumberOfTuples();
+}
+
MEDCouplingUMeshCellIterator::MEDCouplingUMeshCellIterator(MEDCouplingUMesh *mesh):_mesh(mesh),_cell(new MEDCouplingUMeshCell(mesh)),
- _own_cell(true),_cell_id(-1),_nb_cell(0)
+ _own_cell(true),_cell_id(-1),_nb_cell(0)
{
if(mesh)
{
}
MEDCouplingUMeshCellIterator::MEDCouplingUMeshCellIterator(MEDCouplingUMesh *mesh, MEDCouplingUMeshCell *itc, int bg, int end):_mesh(mesh),_cell(itc),
- _own_cell(false),_cell_id(bg-1),
- _nb_cell(end)
+ _own_cell(false),_cell_id(bg-1),
+ _nb_cell(end)
{
if(mesh)
mesh->incrRef();
}
MEDCouplingUMeshCellEntry::MEDCouplingUMeshCellEntry(MEDCouplingUMesh *mesh, INTERP_KERNEL::NormalizedCellType type, MEDCouplingUMeshCell *itc, int bg, int end):_mesh(mesh),_type(type),
- _itc(itc),
- _bg(bg),_end(end)
+ _itc(itc),
+ _bg(bg),_end(end)
{
if(_mesh)
_mesh->incrRef();
