# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2023 CEA, EDF, OPEN CASCADE
#
# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
-print
-print "Perform quick test of the application by loading of the GEOM, SMESH, VISU, MED"
-print "components and doing some operation within the components."
-print
-
-import salome
-import SALOME
-import SALOMEDS
-import os
+import importlib
import sys
-import SALOME_ModuleCatalog
-
-step = 1
-
-print "======================================================================"
-print " %d. Initialize study " % step; step+=1
-print "======================================================================"
-
-# initialize study
-salome.salome_init()
-# get study builder
-builder = salome.myStudy.NewBuilder()
-print "OK"
-
-print
-
-print "======================================================================"
-print " %d. Retrieve module catalog " % step; step+=1
-print "======================================================================"
-
-obj = salome.naming_service.Resolve('Kernel/ModulCatalog')
-catalog = obj._narrow(SALOME_ModuleCatalog.ModuleCatalog)
-if not catalog:
- raise RuntimeError, "Can't accesss module catalog"
-print "OK"
-
-print
-
-print "======================================================================"
-print " %d. Check modules availability in the module catalog " % step; step+=1
-print "======================================================================"
-
-print
-print "--- Check GEOM ..."
-comp = catalog.GetComponent("GEOM")
-if not comp:
- raise RuntimeError, "Component GEOM is not found in Module Catalog."
-print "OK"
-
-print
-print "--- Check SMESH ..."
-comp = catalog.GetComponent("SMESH")
-if not comp:
- raise RuntimeError, "Component SMESH is not found in Module Catalog."
-print "OK"
-
-print
-print "--- Check MED ..."
-comp = catalog.GetComponent("MED")
-if not comp:
- raise RuntimeError, "Component MED is not found in Module Catalog."
-print "OK"
-
-print
-print "--- Check VISU ..."
-comp = catalog.GetComponent("VISU")
-if not comp:
- raise RuntimeError, "Component VISU is not found in Module Catalog."
-print "OK"
-
-print
-
-print "======================================================================"
-print " %d. Test Data Server " % step; step+=1
-print "======================================================================"
-
-print
-print "--- Create new component ..."
-comp = builder.NewComponent("TEST")
-if not comp:
- raise RuntimeError, "Can't create new component"
-print "OK"
-
-print
-print "--- Create AttributeName ..."
-A = builder.FindOrCreateAttribute(comp, "AttributeName")
-if not A:
- raise RuntimeError, "Can't create AttributeName attribute"
-A.SetValue("TEST")
-if A.Value() != "TEST":
- raise RuntimeError, "Error : wrong value of AttributeName"
-print "OK"
-
-print
-print "--- Create AttributeReal ..."
-A = builder.FindOrCreateAttribute(comp, "AttributeReal")
-if not A:
- raise RuntimeError, "Can't create AttributeReal attribute"
-A.SetValue(0.0001)
-if A.Value() != 0.0001:
- raise RuntimeError, "Error : wrong value of AttributeReal"
-print "OK"
-
-print
-
-print "======================================================================"
-print " %d. Test Geometry " % step; step+=1
-print "======================================================================"
-
-import geompy
-
-ShapeTypeCompSolid = 1
-ShapeTypeSolid = 2
-ShapeTypeShell = 3
-ShapeTypeFace = 4
-ShapeTypeWire = 5
-ShapeTypeEdge = 6
-ShapeTypeVertex = 7
-
-print
-print "--- Create a box ..."
-box = geompy.MakeBox(0., 0., 0., 100., 200., 300.)
-idbox = geompy.addToStudy(box, "box")
-box_obj = salome.myStudy.FindObjectByPath("/Geometry/box")
-if not box_obj:
- raise RuntimeError, "Error : wrong value of AttributeReal"
-print "OK"
-
-# ---- add shell from box in study
-print
-print "--- Extract shell ..."
-subShellList = geompy.SubShapeAll(box, ShapeTypeShell)
-shell = subShellList[0]
-name = geompy.SubShapeName(shell, box)
-idshell = geompy.addToStudyInFather(box, shell, name)
-print name
-print "OK"
-
-# ---- add first face of box in study
-print
-print "--- Extract face ..."
-subShapeList = geompy.SubShapeAll(box, ShapeTypeFace)
-face = subShapeList[0]
-name = geompy.SubShapeName(face, box)
-idface = geompy.addToStudyInFather(box, face, name)
-print name
-print "OK"
-
-# ---- add first edge of face in study
-print
-print "--- Extract edge ..."
-edgeList = geompy.SubShapeAll(face, ShapeTypeEdge)
-edge = edgeList[0];
-name = geompy.SubShapeName(edge, face)
-idedge = geompy.addToStudyInFather(face, edge, name)
-print name
-print "OK"
-
-# ---- update object browser
-if salome.hasDesktop():
- salome.sg.updateObjBrowser(1);
-
-print
-
-print "======================================================================"
-print " %d. Test Mesh " % step; step+=1
-print "======================================================================"
-
-import StdMeshers
-import SMESH
-
-smesh = salome.lcc.FindOrLoadComponent("FactoryServer", "SMESH")
-if salome.hasDesktop():
- smeshgui = salome.ImportComponentGUI("SMESH")
- smeshgui.Init(salome.myStudyId);
-else:
- smesh.SetCurrentStudy(salome.myStudy)
-
-# ---- create hypotheses
-
-if sys.platform == "win32":
- stdMeshersEngine = "StdMeshersEngine"
-else:
- stdMeshersEngine = "libStdMeshersEngine.so"
-
-print
-print "--- Create hypotheses ..."
-
-print
-print "------ LocalLength ..."
-hypLen1 = smesh.CreateHypothesis( "LocalLength", stdMeshersEngine )
-hypLen1.SetLength(100)
-print hypLen1.GetName()
-print hypLen1.GetId()
-print hypLen1.GetLength()
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(hypLen1), "Local_Length_100")
-print "OK"
-
-print
-print "------ NumberOfSegments ..."
-hypNbSeg1= smesh.CreateHypothesis( "NumberOfSegments", stdMeshersEngine )
-hypNbSeg1.SetNumberOfSegments(7)
-print hypNbSeg1.GetName()
-print hypNbSeg1.GetId()
-print hypNbSeg1.GetNumberOfSegments()
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(hypNbSeg1), "NumberOfSegments_7")
-print "OK"
-
-print
-print "------ MaxElementArea [1] ..."
-hypArea1 = smesh.CreateHypothesis( "MaxElementArea", stdMeshersEngine )
-hypArea1.SetMaxElementArea(2500)
-print hypArea1.GetName()
-print hypArea1.GetId()
-print hypArea1.GetMaxElementArea()
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(hypArea1), "MaxElementArea_2500")
-print "OK"
-
-print
-print "------ MaxElementArea [2] ..."
-hypArea2 = smesh.CreateHypothesis( "MaxElementArea", stdMeshersEngine )
-hypArea2.SetMaxElementArea(500)
-print hypArea2.GetName()
-print hypArea2.GetId()
-print hypArea2.GetMaxElementArea()
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(hypArea2), "MaxElementArea_500")
-print "OK"
-
-# ---- create algorithms
-
-print
-print "--- Create algorithms ..."
-
-print
-print "------ Regular_1D ..."
-algoReg = smesh.CreateHypothesis( "Regular_1D", stdMeshersEngine )
-listHyp = algoReg.GetCompatibleHypothesis()
-for hyp in listHyp:
- print hyp
-print algoReg.GetName()
-print algoReg.GetId()
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(algoReg), "Regular_1D" )
-print "OK"
-
-print
-print "------ MEFISTO_2D ..."
-algoMef = smesh.CreateHypothesis( "MEFISTO_2D", stdMeshersEngine )
-listHyp=algoMef.GetCompatibleHypothesis()
-for hyp in listHyp:
- print hyp
-print algoMef.GetName()
-print algoMef.GetId()
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(algoMef), "MEFISTO_2D" )
-print "OK"
-
-# ---- create mesh on the box, apply hypotheses / algorithms
-
-print
-print "--- Create mesh on the box ..."
-mesh = smesh.CreateMesh(box)
-if salome.hasDesktop():
- smeshgui.SetName( salome.ObjectToID(mesh), "MeshBox" );
-ret = mesh.AddHypothesis(box, algoReg)
-ret = mesh.AddHypothesis(box, algoMef)
-ret = mesh.AddHypothesis(box, hypNbSeg1)
-ret = mesh.AddHypothesis(box, hypArea1)
-print "OK"
-
-# ---- create submesh on the edge, add hypothesis
-
-print
-print "--- Add 1D sub-mesh on the edge ..."
-submesh = mesh.GetSubMesh(edge, "SubMeshEdge")
-ret = mesh.AddHypothesis(edge, algoReg)
-ret = mesh.AddHypothesis(edge, hypLen1)
-print "OK"
-
-# ---- create submesh on the edge, add hypothesis
-
-print
-print "--- Add 2D sub-mesh on the face ..."
-submesh = mesh.GetSubMesh(face, "SubMeshFace")
-ret = mesh.AddHypothesis(face, hypArea2)
-print "OK"
-
-# ---- compute mesh
-print
-print "--- Compute mesh ..."
-smesh.Compute(mesh, box)
-print "OK"
-
-# ---- update object browser
-if salome.hasDesktop():
- salome.sg.updateObjBrowser(1);
-
-print
-
-print "======================================================================"
-print " %d. Test Med " % step; step+=1
-print "======================================================================"
-
-import xmed
-from xmed import properties
-from xmed.fieldproxy import FieldProxy
-
-xmed.setConsoleGlobals(globals())
-
-# Load some test data in the MedDataManager
-filepath = properties.testFilePath
-xmed.dataManager.addDatasource(filepath)
-fieldHandlerList = xmed.dataManager.getFieldHandlerList()
-
-fieldHandler0 = fieldHandlerList[0]
-print "---Field Handler 0:\n%s" % fieldHandler0
-fieldHandler1 = fieldHandlerList[1]
-print "---Field Handler 1:\n%s" % fieldHandler1
-
-print "--- The addition of two fields can be done using field handler directly."
-addFieldHandler = xmed.calculator.add(fieldHandler0, fieldHandler1)
-print "--- Result handler:\n%s" % addFieldHandler
-
-print "--- Or with a field proxy that easy the writing of operations."
-fieldProxy0 = FieldProxy(fieldHandler0)
-fieldProxy1 = FieldProxy(fieldHandler1)
-
-resHandler = fieldProxy0 + fieldProxy1
-if resHandler is None:
- print "Error: result handler is None!"
-else:
- print "--- Result handler:\n%s" % resHandler
- print "OK"
-
-print
-
-print "======================================================================"
-print " %d. Test Post-Pro " % step; step+=1
-print "======================================================================"
-
-import VISU
-
-medFileName = "pointe.med"
-medFile = os.path.join(os.getenv('DATA_DIR'), 'MedFiles', medFileName)
-
-aMeshName = "maa1"
-anEntity = VISU.NODE
-field_name = "fieldnodedouble"
-
-if salome.hasDesktop(): # in gui mode
-
- import visu_gui
- visu = salome.lcc.FindOrLoadComponent("FactoryServer", "VISU")
-
- print
- print "--- Import med file %s to the VISU ..." % medFile
- result2 = visu.ImportFile(medFile);
- if not result2:
- raise RuntimeError, "Can't import file"
- print "OK"
-
- print
- print "--- Create mesh presentation ..."
- mesh2 = visu.MeshOnEntity(result2, aMeshName, anEntity);
- if not mesh2:
- raise RuntimeError, "Can't create mesh presentation"
- print "OK"
-
- print
- print "--- Create scalar map ..."
- scalarMap2 = visu.ScalarMapOnField(result2, aMeshName, anEntity, field_name, 3)
- if not scalarMap2:
- raise RuntimeError, "Can't create scalar map"
- print "OK"
- pass
-
-else: # not in gui mode, visu can not be tested
-
- print
- print "VISU module requires SALOME to be running in GUI mode."
- print
- print "Skipping test for VISU..."
- pass
-
-# ---- update object browser
-if salome.hasDesktop():
- salome.sg.updateObjBrowser(1);
+import unittest
+
+def main(modules=None):
+ suite = unittest.TestSuite()
+ loader = unittest.defaultTestLoader
+
+ import salome
+ salome.salome_init()
+
+ if not modules:
+ from salome.kernel.services import getComponentList
+ modules = getComponentList()
+ if salome.hasDesktop():
+ import SalomePyQt
+ sg = SalomePyQt.SalomePyQt()
+ gui_modules = sg.getComponents()
+ modules += [i for i in gui_modules if i not in modules]
+ elif not isinstance(modules, (list, tuple)):
+ modules = [modules]
+ for module in modules:
+ test_name = '{}_test'.format(module.lower())
+ try:
+ importlib.import_module(test_name)
+ test_module = sys.modules[test_name]
+ suite.addTest(loader.loadTestsFromModule(test_module))
+ except ImportError:
+ pass
+ runner = unittest.TextTestRunner()
+ return runner.run(suite)
+
+main()