# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2023 CEA, EDF, OPEN CASCADE
#
# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
-print()
-print("Perform quick test of the application by loading of the GEOM, SMESH, MED, PARAVIS")
-print("components and doing some operation within the components.")
-print()
-
-import salome
-import SALOME
-import SALOMEDS
-import os
+import importlib
import sys
-import SALOME_ModuleCatalog
-
-step = 1
-
-print("======================================================================")
-print(" %d. Initialize study " % step); step+=1
-print("======================================================================")
-
-# initialize study
-salome.salome_init()
-# get study builder
-builder = salome.myStudy.NewBuilder()
-print("OK")
-
-print()
-
-print("======================================================================")
-print(" %d. Retrieve module catalog " % step); step+=1
-print("======================================================================")
-
-obj = salome.naming_service.Resolve('Kernel/ModulCatalog')
-catalog = obj._narrow(SALOME_ModuleCatalog.ModuleCatalog)
-if not catalog:
- raise RuntimeError("Can't accesss module catalog")
-print("OK")
-
-print()
-
-print("======================================================================")
-print(" %d. Check modules availability in the module catalog " % step); step+=1
-print("======================================================================")
-
-for module in [ "GEOM", "SMESH", "MEDFactory", "PVSERVER"]:
- print()
- print("--- Check %s ..." % module)
- comp = catalog.GetComponent(module)
- if not comp:
- raise RuntimeError("Component %s is not found in Module Catalog." % module)
- print("OK")
- pass
-
-print()
-
-print("======================================================================")
-print(" %d. Test Data Server " % step); step+=1
-print("======================================================================")
-
-print()
-print("--- Create new component ...")
-comp = builder.NewComponent("TEST")
-if not comp:
- raise RuntimeError("Can't create new component")
-print("OK")
-
-print()
-print("--- Create AttributeName ...")
-A = builder.FindOrCreateAttribute(comp, "AttributeName")
-if not A:
- raise RuntimeError("Can't create AttributeName attribute")
-A.SetValue("TEST")
-if A.Value() != "TEST":
- raise RuntimeError("Error : wrong value of AttributeName")
-print("OK")
-
-print()
-print("--- Create AttributeReal ...")
-A = builder.FindOrCreateAttribute(comp, "AttributeReal")
-if not A:
- raise RuntimeError("Can't create AttributeReal attribute")
-A.SetValue(0.0001)
-if A.Value() != 0.0001:
- raise RuntimeError("Error : wrong value of AttributeReal")
-print("OK")
-
-print()
-
-print("======================================================================")
-print(" %d. Test Geometry " % step); step+=1
-print("======================================================================")
-
-from salome.geom import geomBuilder
-geompy = geomBuilder.New()
-
-ShapeTypeCompSolid = 1
-ShapeTypeSolid = 2
-ShapeTypeShell = 3
-ShapeTypeFace = 4
-ShapeTypeWire = 5
-ShapeTypeEdge = 6
-ShapeTypeVertex = 7
-
-print()
-print("--- Create a box ...")
-box = geompy.MakeBox(0., 0., 0., 100., 200., 300.)
-idbox = geompy.addToStudy(box, "box")
-box_obj = salome.myStudy.FindObjectByPath("/Geometry/box")
-if not box_obj:
- raise RuntimeError("Error : wrong value of AttributeReal")
-print("OK")
-
-# ---- add shell from box in study
-print()
-print("--- Extract shell ...")
-subShellList = geompy.SubShapeAll(box, ShapeTypeShell)
-shell = subShellList[0]
-name = geompy.SubShapeName(shell, box)
-idshell = geompy.addToStudyInFather(box, shell, name)
-print(name)
-print("OK")
-
-# ---- add first face of box in study
-print()
-print("--- Extract face ...")
-subShapeList = geompy.SubShapeAll(box, ShapeTypeFace)
-face = subShapeList[0]
-name = geompy.SubShapeName(face, box)
-idface = geompy.addToStudyInFather(box, face, name)
-print(name)
-print("OK")
-
-# ---- add first edge of face in study
-print()
-print("--- Extract edge ...")
-edgeList = geompy.SubShapeAll(face, ShapeTypeEdge)
-edge = edgeList[0];
-name = geompy.SubShapeName(edge, face)
-idedge = geompy.addToStudyInFather(face, edge, name)
-print(name)
-print("OK")
-
-# ---- update object browser
-if salome.hasDesktop():
- salome.sg.updateObjBrowser();
-
-print()
-
-print("======================================================================")
-print(" %d. Test Mesh " % step); step+=1
-print("======================================================================")
-
-from salome.StdMeshers import StdMeshersBuilder
-import SMESH
-from salome.smesh import smeshBuilder
-
-smesh = salome.lcc.FindOrLoadComponent("FactoryServer", "SMESH")
-if salome.hasDesktop():
- smeshgui = salome.ImportComponentGUI("SMESH")
- smeshgui.Init();
-else:
- smesh = smeshBuilder.New()
-
-# ---- create hypotheses
-
-stdMeshersEngine = "StdMeshersEngine"
-
-print()
-print("--- Create hypotheses ...")
-
-print()
-print("------ LocalLength ...")
-hypLen1 = smesh.CreateHypothesis( "LocalLength", stdMeshersEngine )
-hypLen1.SetLength(100)
-print(hypLen1.GetName())
-print(hypLen1.GetId())
-print(hypLen1.GetLength())
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(hypLen1), "Local_Length_100")
-print("OK")
-
-print()
-print("------ NumberOfSegments ...")
-hypNbSeg1= smesh.CreateHypothesis( "NumberOfSegments", stdMeshersEngine )
-hypNbSeg1.SetNumberOfSegments(7)
-print(hypNbSeg1.GetName())
-print(hypNbSeg1.GetId())
-print(hypNbSeg1.GetNumberOfSegments())
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(hypNbSeg1), "NumberOfSegments_7")
-print("OK")
-
-print()
-print("------ MaxElementArea [1] ...")
-hypArea1 = smesh.CreateHypothesis( "MaxElementArea", stdMeshersEngine )
-hypArea1.SetMaxElementArea(2500)
-print(hypArea1.GetName())
-print(hypArea1.GetId())
-print(hypArea1.GetMaxElementArea())
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(hypArea1), "MaxElementArea_2500")
-print("OK")
-
-print()
-print("------ MaxElementArea [2] ...")
-hypArea2 = smesh.CreateHypothesis( "MaxElementArea", stdMeshersEngine )
-hypArea2.SetMaxElementArea(500)
-print(hypArea2.GetName())
-print(hypArea2.GetId())
-print(hypArea2.GetMaxElementArea())
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(hypArea2), "MaxElementArea_500")
-print("OK")
-
-# ---- create algorithms
-
-print()
-print("--- Create algorithms ...")
-
-print()
-print("------ Regular_1D ...")
-algoReg = smesh.CreateHypothesis( "Regular_1D", stdMeshersEngine )
-listHyp = algoReg.GetCompatibleHypothesis()
-for hyp in listHyp:
- print(hyp)
-print(algoReg.GetName())
-print(algoReg.GetId())
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(algoReg), "Regular_1D" )
-print("OK")
-
-print()
-print("------ MEFISTO_2D ...")
-algoMef = smesh.CreateHypothesis( "MEFISTO_2D", stdMeshersEngine )
-listHyp=algoMef.GetCompatibleHypothesis()
-for hyp in listHyp:
- print(hyp)
-print(algoMef.GetName())
-print(algoMef.GetId())
-if salome.hasDesktop():
- smeshgui.SetName(salome.ObjectToID(algoMef), "MEFISTO_2D" )
-print("OK")
-
-# ---- create mesh on the box, apply hypotheses / algorithms
-
-print()
-print("--- Create mesh on the box ...")
-mesh = smesh.CreateMesh(box)
-if salome.hasDesktop():
- smeshgui.SetName( salome.ObjectToID(mesh), "MeshBox" );
-ret = mesh.AddHypothesis(box, algoReg)
-ret = mesh.AddHypothesis(box, algoMef)
-ret = mesh.AddHypothesis(box, hypNbSeg1)
-ret = mesh.AddHypothesis(box, hypArea1)
-print("OK")
-
-# ---- create submesh on the edge, add hypothesis
-
-print()
-print("--- Add 1D sub-mesh on the edge ...")
-submesh = mesh.GetSubMesh(edge, "SubMeshEdge")
-ret = mesh.AddHypothesis(edge, algoReg)
-ret = mesh.AddHypothesis(edge, hypLen1)
-print("OK")
-
-# ---- create submesh on the edge, add hypothesis
-
-print()
-print("--- Add 2D sub-mesh on the face ...")
-submesh = mesh.GetSubMesh(face, "SubMeshFace")
-ret = mesh.AddHypothesis(face, hypArea2)
-print("OK")
-
-# ---- compute mesh
-print()
-print("--- Compute mesh ...")
-smesh.Compute(mesh, box)
-print("OK")
-
-# ---- update object browser
-if salome.hasDesktop():
- salome.sg.updateObjBrowser();
-
-print()
-
-print("======================================================================")
-print(" %d. Test Med " % step); step+=1
-print("======================================================================")
-
-import medcalc
-#from medcalc import properties
-from medcalc.fieldproxy import FieldProxy
-
-medcalc.medconsole.setConsoleGlobals(globals())
-try:
- med_root=os.environ["MED_ROOT_DIR"]
-except KeyError as e:
- raise RuntimeError("MED_ROOT_DIR should be defined to load the test data")
-
-filepath = os.path.join(med_root,"share","salome","resources","med","medcalc_testfiles","smallmesh_varfield.med")
-medcalc.medio.LoadDataSource(filepath)
-fieldHandlerList = medcalc.medevents.dataManager.getFieldHandlerList()
-
-fieldHandler0 = fieldHandlerList[0]
-print("---Field Handler 0:\n%s" % fieldHandler0)
-fieldHandler1 = fieldHandlerList[1]
-print("---Field Handler 1:\n%s" % fieldHandler1)
-
-print("--- The addition of two fields can be done using field handler directly.")
-addFieldHandler = medcalc.fieldproxy.calculator.add(fieldHandler0,fieldHandler1)
-print("--- Result handler:\n%s" % addFieldHandler)
-
-print("--- Or with a field proxy that easy the writing of operations.")
-fieldProxy0 = FieldProxy(fieldHandler0)
-fieldProxy1 = FieldProxy(fieldHandler1)
-
-resHandler = fieldProxy0 + fieldProxy1
-if resHandler is None:
- print("Error: result handler is None!")
-else:
- print("--- Result handler:\n%s" % resHandler)
- print("OK")
-
-print()
-
-
-print("======================================================================")
-print(" %d. Test Paravis " % step); step+=1
-print("======================================================================")
-
-if salome.hasDesktop(): # in gui mode
-
- print("**** Importing pvserver... It can take some time.")
- import pvserver
- import pvsimple
-
- #====================Stage1: Importing MED file====================
-
- print("**** Stage1: Importing MED file")
-
- print('Import "ResOK_0000.med"...............', end=' ')
- medFileName = "ResOK_0000.med"
- medFile = os.path.join(os.getenv('DATA_DIR'), 'MedFiles', medFileName)
- pvsimple.MEDReader( FileName=medFile )
- med_reader = pvsimple.GetActiveSource()
-
- if med_reader is None:
- print("FAILED")
- else:
- print("OK")
-
- #====================Stage2: Displaying presentation===============
-
- print("**** Stage2: Displaying presentation")
-
- print('Get view...................', end=' ')
- view = pvsimple.GetRenderView()
- if view is None:
- print("FAILED")
- else:
- print ("OK")
-
- print("Creating presentation.......",end='')
- prs = pvsimple.GetRepresentation(med_reader)
- if prs is None:
- print("FAILED")
- else:
- rep_list = view.Representations
- for rep in rep_list:
- if hasattr(rep, 'Visibility'):
- rep.Visibility = (rep == prs)
- pvsimple.Render(view=view)
-
- # ---- surface representation
- prs.SetRepresentationType('Surface')
- view.ResetCamera()
-
- print ("OK")
-
-else: # not in gui mode, Paravis can not be tested
-
- print()
- print("PARAVIS module requires SALOME to be running in GUI mode.")
- print()
- print("Skipping test for PARAVIS...")
- pass
-
-# ---- update object browser
-if salome.hasDesktop():
- salome.sg.updateObjBrowser();
+import unittest
+
+def main(modules=None):
+ suite = unittest.TestSuite()
+ loader = unittest.defaultTestLoader
+
+ import salome
+ salome.salome_init()
+
+ if not modules:
+ from salome.kernel.services import getComponentList
+ modules = getComponentList()
+ if salome.hasDesktop():
+ import SalomePyQt
+ sg = SalomePyQt.SalomePyQt()
+ gui_modules = sg.getComponents()
+ modules += [i for i in gui_modules if i not in modules]
+ elif not isinstance(modules, (list, tuple)):
+ modules = [modules]
+ for module in modules:
+ test_name = '{}_test'.format(module.lower())
+ try:
+ importlib.import_module(test_name)
+ test_module = sys.modules[test_name]
+ suite.addTest(loader.loadTestsFromModule(test_module))
+ except ImportError:
+ pass
+ runner = unittest.TextTestRunner()
+ return runner.run(suite)
+
+main()