Minor: portability issue. On CentOS5.2, MPI_Datatype is an int.

[tools/medcoupling.git] / src / INTERP_KERNEL / InterpolationPlanar.txx

diff --git a/src/INTERP_KERNEL/InterpolationPlanar.txx b/src/INTERP_KERNEL/InterpolationPlanar.txx
index 73b2e9d31d7a194ca77e1fc39179fd577f0dd1d7..d7a1fea200480cec4da107e9a13c48b2a1f400a1 100644 (file)
--- a/src/INTERP_KERNEL/InterpolationPlanar.txx
+++ b/src/INTERP_KERNEL/InterpolationPlanar.txx
@@ -1,9 +1,9 @@
-// Copyright (C) 2007-2013  CEA/DEN, EDF R&D
+// Copyright (C) 2007-2015  CEA/DEN, EDF R&D
 //
 // This library is free software; you can redistribute it and/or
 // modify it under the terms of the GNU Lesser General Public
 // License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
 //
 // This library is distributed in the hope that it will be useful,
 // but WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -164,6 +164,7 @@ namespace INTERP_KERNEL
             intersector=new TriangulationIntersector<MyMeshType,MatrixType,PlanarIntersectorP0P0>(myMeshT,myMeshS,_dim_caracteristic,
                                                                                                   InterpolationOptions::getPrecision(),
                                                                                                   InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                  InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                   InterpolationOptions::getMedianPlane(),
                                                                                                   InterpolationOptions::getOrientation(),
                                                                                                   InterpolationOptions::getPrintLevel());
@@ -172,6 +173,7 @@ namespace INTERP_KERNEL
             intersector=new ConvexIntersector<MyMeshType,MatrixType,PlanarIntersectorP0P0>(myMeshT,myMeshS,_dim_caracteristic,
                                                                                            InterpolationOptions::getPrecision(),
                                                                                            InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                           InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                            InterpolationOptions::getMedianPlane(),
                                                                                            InterpolationOptions::getDoRotate(),
                                                                                            InterpolationOptions::getOrientation(),
@@ -180,6 +182,7 @@ namespace INTERP_KERNEL
           case Geometric2D:
             intersector=new Geometric2DIntersector<MyMeshType,MatrixType,PlanarIntersectorP0P0>(myMeshT, myMeshS, _dim_caracteristic,
                                                                                                 InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                 InterpolationOptions::getMedianPlane(),
                                                                                                 InterpolationOptions::getPrecision(),
                                                                                                 InterpolationOptions::getOrientation());
@@ -187,6 +190,7 @@ namespace INTERP_KERNEL
           case PointLocator:
             intersector=new PointLocator2DIntersector<MyMeshType,MatrixType,PlanarIntersectorP0P0>(myMeshT, myMeshS, _dim_caracteristic,
                                                                                                    InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                   InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                    InterpolationOptions::getMedianPlane(),
                                                                                                    InterpolationOptions::getPrecision(),
                                                                                                    InterpolationOptions::getOrientation());
@@ -203,6 +207,7 @@ namespace INTERP_KERNEL
             intersector=new TriangulationIntersector<MyMeshType,MatrixType,PlanarIntersectorP0P1>(myMeshT,myMeshS,_dim_caracteristic,
                                                                                                   InterpolationOptions::getPrecision(),
                                                                                                   InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                  InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                   InterpolationOptions::getMedianPlane(),
                                                                                                   InterpolationOptions::getOrientation(),
                                                                                                   InterpolationOptions::getPrintLevel());
@@ -211,6 +216,7 @@ namespace INTERP_KERNEL
             intersector=new ConvexIntersector<MyMeshType,MatrixType,PlanarIntersectorP0P1>(myMeshT,myMeshS,_dim_caracteristic,
                                                                                            InterpolationOptions::getPrecision(),
                                                                                            InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                           InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                            InterpolationOptions::getMedianPlane(),
                                                                                            InterpolationOptions::getDoRotate(),
                                                                                            InterpolationOptions::getOrientation(),
@@ -219,6 +225,7 @@ namespace INTERP_KERNEL
           case Geometric2D:
             intersector=new Geometric2DIntersector<MyMeshType,MatrixType,PlanarIntersectorP0P1>(myMeshT, myMeshS, _dim_caracteristic,
                                                                                                 InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                 InterpolationOptions::getMedianPlane(),
                                                                                                 InterpolationOptions::getPrecision(),
                                                                                                 InterpolationOptions::getOrientation());
@@ -226,6 +233,7 @@ namespace INTERP_KERNEL
           case PointLocator:
             intersector=new PlanarIntersectorP0P1PL<MyMeshType,MatrixType>(myMeshT, myMeshS, _dim_caracteristic,
                                                                            InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                           InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                            InterpolationOptions::getMedianPlane(),
                                                                            InterpolationOptions::getPrecision(),
                                                                            InterpolationOptions::getOrientation());
@@ -234,6 +242,7 @@ namespace INTERP_KERNEL
             intersector=new TriangulationIntersector<MyMeshType,MatrixType,PlanarIntersectorP0P1Bary>(myMeshT,myMeshS,_dim_caracteristic,
                                                                                                       InterpolationOptions::getPrecision(),
                                                                                                       InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                      InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                       InterpolationOptions::getMedianPlane(),
                                                                                                       InterpolationOptions::getOrientation(),
                                                                                                       InterpolationOptions::getPrintLevel());
@@ -241,6 +250,7 @@ namespace INTERP_KERNEL
           case BarycentricGeo2D:
             intersector=new Geometric2DIntersector<MyMeshType,MatrixType,PlanarIntersectorP0P1Bary>(myMeshT, myMeshS, _dim_caracteristic,
                                                                                                     InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                    InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                     InterpolationOptions::getMedianPlane(),
                                                                                                     InterpolationOptions::getPrecision(),
                                                                                                     InterpolationOptions::getOrientation());
@@ -257,6 +267,7 @@ namespace INTERP_KERNEL
             intersector=new TriangulationIntersector<MyMeshType,MatrixType,PlanarIntersectorP1P0>(myMeshT,myMeshS,_dim_caracteristic,
                                                                                                   InterpolationOptions::getPrecision(),
                                                                                                   InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                  InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                   InterpolationOptions::getMedianPlane(),
                                                                                                   InterpolationOptions::getOrientation(),
                                                                                                   InterpolationOptions::getPrintLevel());
@@ -265,6 +276,7 @@ namespace INTERP_KERNEL
             intersector=new ConvexIntersector<MyMeshType,MatrixType,PlanarIntersectorP1P0>(myMeshT,myMeshS,_dim_caracteristic,
                                                                                            InterpolationOptions::getPrecision(),
                                                                                            InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                           InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                            InterpolationOptions::getMedianPlane(),
                                                                                            InterpolationOptions::getDoRotate(),
                                                                                            InterpolationOptions::getOrientation(),
@@ -273,21 +285,24 @@ namespace INTERP_KERNEL
           case Geometric2D:
             intersector=new Geometric2DIntersector<MyMeshType,MatrixType,PlanarIntersectorP1P0>(myMeshT, myMeshS, _dim_caracteristic,
                                                                                                 InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                 InterpolationOptions::getMedianPlane(),
                                                                                                 InterpolationOptions::getPrecision(),
                                                                                                 InterpolationOptions::getOrientation());
             break;
           case PointLocator:
             intersector=new PlanarIntersectorP1P0PL<MyMeshType,MatrixType>(myMeshT, myMeshS, _dim_caracteristic,
-                                                                       InterpolationOptions::getMaxDistance3DSurfIntersect(),
-                                                                       InterpolationOptions::getMedianPlane(),
-                                                                       InterpolationOptions::getPrecision(),
-                                                                       InterpolationOptions::getOrientation());
+                                                                           InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                           InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
+                                                                           InterpolationOptions::getMedianPlane(),
+                                                                           InterpolationOptions::getPrecision(),
+                                                                           InterpolationOptions::getOrientation());
             break;
           case Barycentric:
              intersector=new TriangulationIntersector<MyMeshType,MatrixType,PlanarIntersectorP1P0Bary>(myMeshT,myMeshS,_dim_caracteristic,
                                                                                                        InterpolationOptions::getPrecision(),
                                                                                                        InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                       InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                        InterpolationOptions::getMedianPlane(),
                                                                                                        InterpolationOptions::getOrientation(),
                                                                                                        InterpolationOptions::getPrintLevel());
@@ -295,6 +310,7 @@ namespace INTERP_KERNEL
           case BarycentricGeo2D:
             intersector=new Geometric2DIntersector<MyMeshType,MatrixType,PlanarIntersectorP1P0Bary>(myMeshT, myMeshS, _dim_caracteristic,
                                                                                                     InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                    InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                     InterpolationOptions::getMedianPlane(),
                                                                                                     InterpolationOptions::getPrecision(),
                                                                                                     InterpolationOptions::getOrientation());
@@ -309,6 +325,7 @@ namespace INTERP_KERNEL
             intersector=new TriangulationIntersector<MyMeshType,MatrixType,PlanarIntersectorP1P1>(myMeshT,myMeshS,_dim_caracteristic,
                                                                                                   InterpolationOptions::getPrecision(),
                                                                                                   InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                  InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                   InterpolationOptions::getMedianPlane(),
                                                                                                   InterpolationOptions::getOrientation(),
                                                                                                   InterpolationOptions::getPrintLevel());
@@ -317,6 +334,7 @@ namespace INTERP_KERNEL
             intersector=new ConvexIntersector<MyMeshType,MatrixType,PlanarIntersectorP1P1>(myMeshT,myMeshS,_dim_caracteristic,
                                                                                            InterpolationOptions::getPrecision(),
                                                                                            InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                           InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                            InterpolationOptions::getMedianPlane(),
                                                                                            InterpolationOptions::getDoRotate(),
                                                                                            InterpolationOptions::getOrientation(),
@@ -325,6 +343,7 @@ namespace INTERP_KERNEL
           case Geometric2D:
             intersector=new Geometric2DIntersector<MyMeshType,MatrixType,PlanarIntersectorP1P1>(myMeshT, myMeshS, _dim_caracteristic,
                                                                                                 InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                                                InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                                                 InterpolationOptions::getMedianPlane(),
                                                                                                 InterpolationOptions::getPrecision(),
                                                                                                 InterpolationOptions::getOrientation());
@@ -332,6 +351,7 @@ namespace INTERP_KERNEL
           case PointLocator:
             intersector=new PlanarIntersectorP1P1PL<MyMeshType,MatrixType>(myMeshT, myMeshS, _dim_caracteristic,
                                                                            InterpolationOptions::getMaxDistance3DSurfIntersect(),
+                                                                           InterpolationOptions::getMinDotBtwPlane3DSurfIntersect(),
                                                                            InterpolationOptions::getMedianPlane(),
                                                                            InterpolationOptions::getPrecision(),
                                                                            InterpolationOptions::getOrientation());