-// Copyright (C) 2007-2014 CEA/DEN, EDF R&D
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
_dy=(*(_e2.getEndNode()))[1]-(*(_e2.getStartNode()))[1];
_drSq=_dx*_dx+_dy*_dy;
_cross=
- ((*(_e2.getStartNode()))[0]-center[0])*((*(_e2.getEndNode()))[1]-center[1])-
- ((*(_e2.getStartNode()))[1]-center[1])*((*(_e2.getEndNode()))[0]-center[0]);
+ ((*(_e2.getStartNode()))[0]-center[0])*((*(_e2.getEndNode()))[1]-center[1])-
+ ((*(_e2.getStartNode()))[1]-center[1])*((*(_e2.getEndNode()))[0]-center[0]);
_determinant=getE1().getRadius()*getE1().getRadius()/_drSq-_cross*_cross/(_drSq*_drSq);
if(_determinant>-2*QUADRATIC_PLANAR::_precision)//QUADRATIC_PLANAR::_precision*QUADRATIC_PLANAR::_precision*_drSq*_drSq/(2.*_dx*_dx))
obviousNoIntersection=false;
* @param deltaAngle in ]-2.*Pi;2.*Pi[
*/
EdgeArcCircle::EdgeArcCircle(Node *start, Node *end, const double *center, double radius, double angle0, double deltaAngle, bool direction):Edge(start,end,direction),_angle(deltaAngle),
- _angle0(angle0),_radius(radius)
+ _angle0(angle0),_radius(radius)
{
_center[0]=center[0];
_center[1]=center[1];
*/
double EdgeArcCircle::GetAbsoluteAngleOfNormalizedVect(double ux, double uy)
{
- //When arc is lower than 0.707 Using Asin
- if(fabs(ux)<0.707)
- {
- double ret=SafeAcos(ux);
- if(uy>0.)
- return ret;
- ret=-ret;
- return ret;
- }
- else
- {
- double ret=SafeAsin(uy);
- if(ux>0.)
- return ret;
- if(ret>0.)
- return M_PI-ret;
- else
- return -M_PI-ret;
- }
+ return atan2(uy, ux);
}
void EdgeArcCircle::GetArcOfCirclePassingThru(const double *start, const double *middle, const double *end,
angleInRad0=GetAbsoluteAngleOfNormalizedVect((start[0]-center[0])/radius,(start[1]-center[1])/radius);
double angleInRadM=GetAbsoluteAngleOfNormalizedVect((middle[0]-center[0])/radius,(middle[1]-center[1])/radius);
angleInRad=GetAbsoluteAngleOfNormalizedVect(((start[0]-center[0])*(end[0]-center[0])+(start[1]-center[1])*(end[1]-center[1]))/(radius*radius),
- ((start[0]-center[0])*(end[1]-center[1])-(start[1]-center[1])*(end[0]-center[0]))/(radius*radius));
+ ((start[0]-center[0])*(end[1]-center[1])-(start[1]-center[1])*(end[0]-center[0]))/(radius*radius));
if(IsAngleNotIn(angleInRad0,angleInRad,angleInRadM))
angleInRad=angleInRad<0?2*M_PI+angleInRad:angleInRad-2*M_PI;
}
double tmp3=cos(angle1);
double tmp4=cos(_angle0);
bary[0]=_radius*x0*y0*(tmp4-tmp3)+_radius*_radius*(y0*(cos(2*_angle0)-cos(2*angle1))/4.+
- x0*(_angle/2.+(sin(2.*_angle0)-sin(2.*angle1))/4.))
- +tmp2*(tmp1*tmp1*tmp1-tmp0*tmp0*tmp0)/3.;
+ x0*(_angle/2.+(sin(2.*_angle0)-sin(2.*angle1))/4.))
+ +tmp2*(tmp1*tmp1*tmp1-tmp0*tmp0*tmp0)/3.;
bary[1]=y0*y0*_radius*(tmp4-tmp3)/2.+_radius*_radius*y0*(_angle/2.+(sin(2.*_angle0)-sin(2.*angle1))/4.)
- +tmp2*(tmp4-tmp3+(tmp3*tmp3*tmp3-tmp4*tmp4*tmp4)/3.)/2.;
+ +tmp2*(tmp4-tmp3+(tmp3*tmp3*tmp3-tmp4*tmp4*tmp4)/3.)/2.;
}
+/**
+ * Compute the "middle" of two points on the arc of circle.
+ * The order (p1,p2) or (p2,p1) doesn't matter. p1 and p2 have to be localized on the edge defined by this.
+ * \param[out] mid the point located half-way between p1 and p2 on the arc defined by this.
+ * \sa getMiddleOfPointsOriented() a generalisation working also when p1 and p2 are not on the arc.
+ */
void EdgeArcCircle::getMiddleOfPoints(const double *p1, const double *p2, double *mid) const
{
double dx1((p1[0]-_center[0])/_radius),dy1((p1[1]-_center[1])/_radius),dx2((p2[0]-_center[0])/_radius),dy2((p2[1]-_center[1])/_radius);
//
double myDelta1(angle1-_angle0),myDelta2(angle2-_angle0);
if(_angle>0.)
- { myDelta1=myDelta1>=0.?myDelta1:myDelta1+2.*M_PI; myDelta2=myDelta2>=0.?myDelta2:myDelta2+2.*M_PI; }
+ { myDelta1=myDelta1>-QUADRATIC_PLANAR::_precision?myDelta1:myDelta1+2.*M_PI; myDelta2=myDelta2>-QUADRATIC_PLANAR::_precision?myDelta2:myDelta2+2.*M_PI; }
else
- { myDelta1=myDelta1<=0.?myDelta1:myDelta1-2.*M_PI; myDelta2=myDelta2<=0.?myDelta2:myDelta2-2.*M_PI; }
+ { myDelta1=myDelta1<QUADRATIC_PLANAR::_precision?myDelta1:myDelta1-2.*M_PI; myDelta2=myDelta2<QUADRATIC_PLANAR::_precision?myDelta2:myDelta2-2.*M_PI; }
////
mid[0]=_center[0]+_radius*cos(_angle0+(myDelta1+myDelta2)/2.);
mid[1]=_center[1]+_radius*sin(_angle0+(myDelta1+myDelta2)/2.);
}
+/**
+ * Compute the "middle" of two points on the arc of circle.
+ * Walk on the circle from p1 to p2 using the rotation direction indicated by this->_angle (i.e. by the orientation of the arc).
+ * This function is sensitive to the ordering of p1 and p2.
+ * \param[out] mid the point located half-way between p1 and p2
+ * \sa getMiddleOfPoints() to be used when the order of p1 and p2 is not relevant.
+ */
+void EdgeArcCircle::getMiddleOfPointsOriented(const double *p1, const double *p2, double *mid) const
+{
+ double dx1((p1[0]-_center[0])/_radius),dy1((p1[1]-_center[1])/_radius),dx2((p2[0]-_center[0])/_radius),dy2((p2[1]-_center[1])/_radius);
+ double angle1(GetAbsoluteAngleOfNormalizedVect(dx1,dy1)),angle2(GetAbsoluteAngleOfNormalizedVect(dx2,dy2));
+
+ if (angle1 <= 0.0)
+ angle1 += 2.*M_PI;
+ if (angle2 <= 0.0)
+ angle2 += 2.*M_PI;
+
+ double avg;
+ if((_angle>0. && angle1 <= angle2) || (_angle<=0. && angle1 >= angle2))
+ avg = (angle1+angle2)/2.;
+ else
+ avg = (angle1+angle2)/2. - M_PI;
+
+ mid[0]=_center[0]+_radius*cos(avg);
+ mid[1]=_center[1]+_radius*sin(avg);
+}
+
+
/*!
* Characteristic value used is angle in ]_Pi;Pi[ from axe 0x.
*/
