#include <QDir>
#include <BRepTools.hxx>
#include <BRep_Builder.hxx>
+#include <BRepCheck_Analyzer.hxx>
const QString REF_DATA_PATH = qgetenv( "HYDRO_REFERENCE_DATA" );
const QString DEF_STR_PATH = qgetenv( "HYDRO_SRC_DIR" ) + "/src/HYDROGUI/resources/def_strickler_table.txt";
void test_HYDROData_LandCoverMap::test_shp_import_cyp()
{
Handle(HYDROData_Document) aDoc = HYDROData_Document::Document(1);
- QString myFileName = REF_DATA_PATH + "/cyprus_natural.shp";
+ QString aFileName = REF_DATA_PATH + "/cyprus_natural.shp";
HYDROData_ShapeFile anImporter;
QStringList PolygonList;
TopTools_SequenceOfShape PolygonFaces;
int Type = -1;
- int aStat = anImporter.ImportPolygons(myFileName, PolygonList, PolygonFaces, Type);
+ int aStat = anImporter.ImportPolygons(aFileName, PolygonList, PolygonFaces, Type);
CPPUNIT_ASSERT(aStat == 1);
CPPUNIT_ASSERT_EQUAL(5, Type);
CPPUNIT_ASSERT_EQUAL(268, PolygonFaces.Length());
void test_HYDROData_LandCoverMap::test_shp_import_clc_dec()
{
Handle(HYDROData_Document) aDoc = HYDROData_Document::Document(1);
- QString myFileName = REF_DATA_PATH + "/CLC_decoupe.shp";
+ QString aFileName = REF_DATA_PATH + "/CLC_decoupe.shp";
HYDROData_ShapeFile anImporter;
QStringList PolygonList;
TopTools_SequenceOfShape PolygonFaces;
int Type = -1;
- int aStat = anImporter.ImportPolygons(myFileName, PolygonList, PolygonFaces, Type);
+ int aStat = anImporter.ImportPolygons(aFileName, PolygonList, PolygonFaces, Type);
CPPUNIT_ASSERT(aStat == 1);
CPPUNIT_ASSERT_EQUAL(5, Type);
CPPUNIT_ASSERT_EQUAL(625, PolygonFaces.Length());
void test_HYDROData_LandCoverMap::test_shp_import_nld_areas()
{
Handle(HYDROData_Document) aDoc = HYDROData_Document::Document(1);
- QString myFileName = REF_DATA_PATH + "/NLD_water_areas_dcw.shp";
+ QString aFileName = REF_DATA_PATH + "/NLD_water_areas_dcw.shp";
HYDROData_ShapeFile anImporter;
QStringList PolygonList;
TopTools_SequenceOfShape PolygonFaces;
int Type = -1;
- int aStat = anImporter.ImportPolygons(myFileName, PolygonList, PolygonFaces, Type);
+ int aStat = anImporter.ImportPolygons(aFileName, PolygonList, PolygonFaces, Type);
CPPUNIT_ASSERT(aStat == 1);
CPPUNIT_ASSERT_EQUAL(5, Type);
CPPUNIT_ASSERT_EQUAL(127, PolygonFaces.Length());
aDoc->Close();
}
+void test_HYDROData_LandCoverMap::test_shp_loop_back()
+{
+ QString aFFileName = REF_DATA_PATH + "/CLC06-cut_1.shp";
+ QString aSFileName = REF_DATA_PATH + "/CLC06-cut_1_res.shp";
+ //This test verify only some geom data (shp+shx) without any dbf reading/writing
+ {
+ Handle(HYDROData_Document) aDoc = HYDROData_Document::Document(1);
+ HYDROData_ShapeFile anImporter;
+ QStringList PolygonList;
+ TopTools_SequenceOfShape PolygonFaces;
+ int Type = -1;
+
+ //import LCM from file (#2-4; #12-14 polygons)
+ CPPUNIT_ASSERT( anImporter.ImportPolygons(aFFileName, PolygonList, PolygonFaces, Type));
+ Handle(HYDROData_LandCoverMap) LCM = Handle(HYDROData_LandCoverMap)::DownCast( aDoc->CreateObject( KIND_LAND_COVER_MAP ) );
+ HYDROData_MapOfFaceToStricklerType aMapFace2ST;
+
+ aMapFace2ST.Add( TopoDS::Face( PolygonFaces(2) ), "" );
+ aMapFace2ST.Add( TopoDS::Face( PolygonFaces(3) ), "" );
+ aMapFace2ST.Add( TopoDS::Face( PolygonFaces(4) ), "" );
+ aMapFace2ST.Add( TopoDS::Face( PolygonFaces(12) ), "" );
+ aMapFace2ST.Add( TopoDS::Face( PolygonFaces(13) ), "" );
+ aMapFace2ST.Add( TopoDS::Face( PolygonFaces(14) ), "" );
+
+ LCM->StoreLandCovers(aMapFace2ST);
+ LCM->SetName("lcm_1");
+
+ TopoDS_Shape aSh = LCM->GetShape();
+ BRepCheck_Analyzer aBCA(aSh);
+ CPPUNIT_ASSERT(aBCA.IsValid());
+
+ //export lcm
+ HYDROData_ShapeFile anExporter;
+ QStringList aNonExpList;
+ anExporter.Export(aSFileName, LCM, aNonExpList);
+ CPPUNIT_ASSERT (aNonExpList.empty());
+
+ aDoc->Close();
+ }
+ {
+ Handle(HYDROData_Document) aDoc = HYDROData_Document::Document(1);
+ HYDROData_ShapeFile anImporter;
+ QStringList PolygonList;
+ TopTools_SequenceOfShape PolygonFaces;
+ int Type = -1;
+
+ //import all
+ CPPUNIT_ASSERT( anImporter.ImportPolygons(aSFileName, PolygonList, PolygonFaces, Type));
+ Handle(HYDROData_LandCoverMap) LCM = Handle(HYDROData_LandCoverMap)::DownCast( aDoc->CreateObject( KIND_LAND_COVER_MAP ) );
+ HYDROData_MapOfFaceToStricklerType aMapFace2ST;
+ CPPUNIT_ASSERT_EQUAL(PolygonFaces.Length(), 6);
+ for ( int i = 1; i <= PolygonFaces.Length(); i++ )
+ aMapFace2ST.Add( TopoDS::Face( PolygonFaces(i) ), "" );
+
+ LCM->StoreLandCovers(aMapFace2ST);
+ LCM->SetName("lcm_2");
+
+ TopoDS_Shape OutSh = LCM->GetShape();
+ BRepCheck_Analyzer aBCA(OutSh);
+ CPPUNIT_ASSERT(aBCA.IsValid());
+
+ TestViewer::show( OutSh, AIS_Shaded, true, "CLC06-cut_1_res" );
+ CPPUNIT_ASSERT_IMAGES
+
+ aDoc->Close();
+ }
+ CPPUNIT_ASSERT_EQUAL(0, remove(aSFileName.toStdString().c_str()));
+}
+
+void test_HYDROData_LandCoverMap::test_add_2_section_poly()
+{
+ Handle(HYDROData_Document) aDoc = HYDROData_Document::Document( 1 );
+
+ Handle(HYDROData_PolylineXY) Polyline_12 =
+ Handle(HYDROData_PolylineXY)::DownCast( aDoc->CreateObject( KIND_POLYLINEXY ) );
+ Polyline_12->SetName( "Polyline_12" );
+
+ Polyline_12->AddSection( "Section_1", HYDROData_PolylineXY::SECTION_POLYLINE, true );
+ Polyline_12->AddPoint( 0, gp_XY( -148.70, 145.68 ) );
+ Polyline_12->AddPoint( 0, gp_XY( -81.71, 210.97 ) );
+ Polyline_12->AddPoint( 0, gp_XY( -21.09, 122.79 ) );
+ Polyline_12->AddPoint( 0, gp_XY( -106.30, 102.44 ) );
+ Polyline_12->AddSection( "Section_2", HYDROData_PolylineXY::SECTION_POLYLINE, true );
+ Polyline_12->AddPoint( 1, gp_XY( -7.09, 227.08 ) );
+ Polyline_12->AddPoint( 1, gp_XY( 46.32, 228.78 ) );
+ Polyline_12->AddPoint( 1, gp_XY( 69.64, 165.61 ) );
+ Polyline_12->AddPoint( 1, gp_XY( 13.68, 156.28 ) );
+
+ Polyline_12->Update();
+
+ Handle(HYDROData_LandCoverMap) LCM = Handle(HYDROData_LandCoverMap)::DownCast( aDoc->CreateObject( KIND_LAND_COVER_MAP ) );
+ CPPUNIT_ASSERT_EQUAL( true, LCM->Add( Polyline_12, "" ) );
+
+ TestViewer::show( LCM->GetShape(), AIS_Shaded, true, "lcm_poly_2_sections" );
+ CPPUNIT_ASSERT_IMAGES
+
+ aDoc->Close();
+}
+
+void test_HYDROData_LandCoverMap::test_split_2()
+{
+ Handle(HYDROData_Document) aDoc = HYDROData_Document::Document( 1 );
+
+ Handle(HYDROData_PolylineXY) Polyline_1 =
+ Handle(HYDROData_PolylineXY)::DownCast( aDoc->CreateObject( KIND_POLYLINEXY ) );
+ Polyline_1->AddSection( "Section_1", HYDROData_PolylineXY::SECTION_POLYLINE, true );
+ Polyline_1->AddPoint( 0, gp_XY( -264.84, 323.44 ) );
+ Polyline_1->AddPoint( 0, gp_XY( 254.45, 301.19 ) );
+ Polyline_1->AddPoint( 0, gp_XY( -291.54, -47.48 ) );
+ Polyline_1->Update();
+
+ Handle(HYDROData_PolylineXY) Polyline_6 =
+ Handle(HYDROData_PolylineXY)::DownCast( aDoc->CreateObject( KIND_POLYLINEXY ) );
+ Polyline_6->AddSection( "Section_1", HYDROData_PolylineXY::SECTION_POLYLINE, true );
+ Polyline_6->AddPoint( 0, gp_XY( -155.15, 199.47 ) );
+ Polyline_6->AddPoint( 0, gp_XY( -71.19, 289.12 ) );
+ Polyline_6->AddPoint( 0, gp_XY( 22.01, 211.57 ) );
+ Polyline_6->AddPoint( 0, gp_XY( -84.00, 134.73 ) );
+ Polyline_6->Update();
+
+ Handle(HYDROData_PolylineXY) Polyline_7 =
+ Handle(HYDROData_PolylineXY)::DownCast( aDoc->CreateObject( KIND_POLYLINEXY ) );
+ Polyline_7->AddSection( "Section_1", HYDROData_PolylineXY::SECTION_POLYLINE, true );
+ Polyline_7->AddPoint( 0, gp_XY( -50.56, 232.20 ) );
+ Polyline_7->AddPoint( 0, gp_XY( 40.51, 286.98 ) );
+ Polyline_7->AddPoint( 0, gp_XY( 118.77, 256.39 ) );
+ Polyline_7->AddPoint( 0, gp_XY( 72.52, 114.10 ) );
+ Polyline_7->Update();
+
+ Handle(HYDROData_PolylineXY) Polyline_8 =
+ Handle(HYDROData_PolylineXY)::DownCast( aDoc->CreateObject( KIND_POLYLINEXY ) );
+ Polyline_8->AddSection( "Section_1", HYDROData_PolylineXY::SECTION_POLYLINE, true );
+ Polyline_8->AddPoint( 0, gp_XY( -44.16, 190.93 ) );
+ Polyline_8->AddPoint( 0, gp_XY( 9.91, 226.51 ) );
+ Polyline_8->AddPoint( 0, gp_XY( 35.53, 175.99 ) );
+ Polyline_8->AddPoint( 0, gp_XY( -9.30, 157.50 ) );
+ Polyline_8->Update();
+
+ Handle(HYDROData_PolylineXY) Polyline_9 =
+ Handle(HYDROData_PolylineXY)::DownCast( aDoc->CreateObject( KIND_POLYLINEXY ) );
+ Polyline_9->AddSection( "Section_1", HYDROData_PolylineXY::SECTION_POLYLINE, false );
+ Polyline_9->AddPoint( 0, gp_XY( -103.92, 288.40 ) );
+ Polyline_9->AddPoint( 0, gp_XY( -53.41, 246.43 ) );
+ Polyline_9->AddPoint( 0, gp_XY( 10.62, 245.01 ) );
+ Polyline_9->Update();
+
+
+ Handle(HYDROData_LandCoverMap) LCM = Handle(HYDROData_LandCoverMap)::DownCast( aDoc->CreateObject( KIND_LAND_COVER_MAP ) );
+ CPPUNIT_ASSERT_EQUAL( true, LCM->Add( Polyline_1, "" ) );
+ CPPUNIT_ASSERT_EQUAL( true, LCM->Add( Polyline_6, "" ) );
+ CPPUNIT_ASSERT_EQUAL( true, LCM->Add( Polyline_7, "" ) );
+
+ CPPUNIT_ASSERT_EQUAL( true, LCM->Split( Polyline_9 ) );
+
+ Handle(HYDROGUI_LandCoverMapPrs) aPrs1 = new HYDROGUI_LandCoverMapPrs( LCM );
+ TestViewer::show( aPrs1, AIS_Shaded, 0, true, "LCM_split_2a" );
+ CPPUNIT_ASSERT_IMAGES
+
+ CPPUNIT_ASSERT_EQUAL( true, LCM->Split( Polyline_8 ) );
+
+ Handle(HYDROGUI_LandCoverMapPrs) aPrs2 = new HYDROGUI_LandCoverMapPrs( LCM );
+ TestViewer::show( aPrs2, AIS_Shaded, 0, true, "LCM_split_2b" );
+ CPPUNIT_ASSERT_IMAGES
+
+ aDoc->Close();
+}
