-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
-//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
+// Copyright (C) 2014-2015 EDF-R&D
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#include <HYDROData_Image.h>
%End
+public:
+
+ enum TransformationMode
+ {
+ ManualGeodesic = 0,
+ ManualCartesian,
+ CartesianFromFile,
+ ReferenceImage
+ };
+
public:
/**
* Stores the image
* \param theImage new image
*/
- void SetImage( const QImage& theImage );
+ void SetImage( const QImage& theImage );
/**
* Load the image from file
* \param theFilePath path to image
*/
- bool LoadImage( const QString& theFilePath );
+ bool LoadImage( const QString& theFilePath );
/**
* Returns the kept image
*/
- QImage Image();
+ QImage Image();
+
+
+ /**
+ * Stores the image file path
+ * \param theFilePath image file path
+ */
+ void SetFilePath( const QString& theFilePath );
+
+ /**
+ * Returns uploaded image file path
+ */
+ QString GetFilePath() const;
+
+
+ /**
+ * Stores the image transformation
+ * \param theTrsf new transformation
+ */
+ void SetTrsf( const QTransform& theTrsf );
+
+ /**
+ * Returns the kept transformation, or "identity" if not yet stored
+ */
+ QTransform Trsf() const;
+
+ /**
+ * Updates the matrix of transformation in accordance with reference points.
+ * \param theTrsf new transformation
+ */
+ void UpdateTrsf();
+
+
+ /**
+ * Returns true if transformation is done by two points only
+ */
+ bool IsByTwoPoints() const;
+
+
+ /**
+ * Removes all references from this image.
+ */
+ bool HasReferences() const;
+
+ /**
+ * Removes all references from this image.
+ */
+ void RemoveAllReferences();
+
+
+ /**
+ * Stores the transformation points in local cs of image
+ * \param thePointA point A
+ * \param thePointB point B
+ * \param thePointC point C
+ */
+ void SetLocalPoints( const QPoint& thePointA,
+ const QPoint& thePointB,
+ const QPoint& thePointC = QPoint( INT_MIN, INT_MIN ),
+ const bool theIsUpdate = true );
+
+ /**
+ * Returns the transformation points in local cs of image
+ * \param thePointA point A
+ * \param thePointB point B
+ * \param thePointC point C
+ * \return true if all parameters has been set before
+ */
+ bool GetLocalPoints( QPoint& thePointA /Out/,
+ QPoint& thePointB /Out/,
+ QPoint& thePointC /Out/ ) const;
+
+ /**
+ * Returns true if local points has been set before
+ */
+ bool HasLocalPoints() const;
+
+
+ /**
+ * Stores the transformation points in global cs
+ * \param theMode transformation mode
+ * \param thePointA point A
+ * \param thePointB point B
+ * \param thePointC point C
+ */
+ void SetGlobalPoints( const TransformationMode& theMode,
+ const QPointF& thePointA,
+ const QPointF& thePointB,
+ const QPointF& thePointC = QPoint( INT_MIN, INT_MIN ),
+ const bool theIsUpdate = true );
+
+ /**
+ * Returns the transformation points in global cs
+ * \param theMode transformation mode
+ * \param thePointA point A
+ * \param thePointB point B
+ * \param thePointC point C
+ * \return true if all parameters has been set before
+ */
+ bool GetGlobalPoints( TransformationMode& theMode,
+ QPointF& thePointA /Out/,
+ QPointF& thePointB /Out/,
+ QPointF& thePointC /Out/ ) const;
+
+ /**
+ * Get transformation points from the file and stores them in global cs
+ * \param theFileName the image georeferencement file name
+ * \return true in case of success
+ */
+ bool SetGlobalPointsFromFile( const QString& theFileName );
+
+ /**
+ * Returns true if global points has been set before
+ */
+ bool HasGlobalPoints() const;
+
+
+ /**
+ * Stores the transformation points in reference image local cs
+ * \param theRefImage reference image
+ * \param thePointA point A
+ * \param thePointB point B
+ * \param thePointC point C
+ */
+ void SetReferencePoints( HYDROData_Image theRefImage,
+ const QPointF& thePointA,
+ const QPointF& thePointB,
+ const QPointF& thePointC = QPoint( INT_MIN, INT_MIN ),
+ const bool theIsUpdate = true )
+ [void ( const opencascade::handle<HYDROData_Image>&, const QPointF&, const QPointF&, const QPointF&, const bool )];
+ %MethodCode
+ Handle(HYDROData_Image) aRefImage =
+ Handle(HYDROData_Image)::DownCast( createHandle( a0 ) );
+ if ( !aRefImage.IsNull() )
+ {
+ Py_BEGIN_ALLOW_THREADS
+ sipSelfWasArg ? sipCpp->HYDROData_Image::SetReferencePoints( aRefImage, *a1, *a2, *a3, a4 ) :
+ sipCpp->SetReferencePoints( aRefImage, *a1, *a2, *a3, a4 );
+ Py_END_ALLOW_THREADS
+ }
+ %End
+
+ /**
+ * Returns the transformation points in reference image local cs
+ * \param theRefImage reference image
+ * \param thePointA point A
+ * \param thePointB point B
+ * \param thePointC point C
+ * \return true if all parameters has been set correctly
+ */
+ bool GetReferencePoints( HYDROData_Image theRefImage,
+ QPointF& thePointA /Out/,
+ QPointF& thePointB /Out/,
+ QPointF& thePointC /Out/ ) const
+ [bool ( const opencascade::handle<HYDROData_Image>&, QPointF&, QPointF&, QPointF& )];
+ %MethodCode
+ Handle(HYDROData_Image) aRefImage =
+ Handle(HYDROData_Image)::DownCast( createHandle( a0 ) );
+ if ( !aRefImage.IsNull() )
+ {
+ Py_BEGIN_ALLOW_THREADS
+ sipRes = sipSelfWasArg ? sipCpp->HYDROData_Image::GetReferencePoints( aRefImage, *a1, *a2, *a3 ) :
+ sipCpp->GetReferencePoints( aRefImage, *a1, *a2, *a3 );
+ Py_END_ALLOW_THREADS
+ }
+ %End
+
+ /**
+ * Returns true if reference points has been set before
+ */
+ bool HasReferencePoints() const;
+
+ /**
+ * Stores the reference image for transformation
+ * \param theRefImage reference image
+ */
+ void SetTrsfReferenceImage( HYDROData_Image theRefImage ) [void ( const opencascade::handle<HYDROData_Image>& )];
+ %MethodCode
+ Handle(HYDROData_Image) aRefImage =
+ Handle(HYDROData_Image)::DownCast( createHandle( a0 ) );
+ if ( !aRefImage.IsNull() )
+ {
+ Py_BEGIN_ALLOW_THREADS
+ sipSelfWasArg ? sipCpp->HYDROData_Image::SetTrsfReferenceImage( aRefImage ) :
+ sipCpp->SetTrsfReferenceImage( aRefImage );
+ Py_END_ALLOW_THREADS
+ }
+ %End
+
+ /**
+ * Returns the reference image for transformation
+ */
+ HYDROData_Image GetTrsfReferenceImage() const [opencascade::handle<HYDROData_Image> ()];
+ %MethodCode
+ Handle(HYDROData_Image) aRefImage;
+
+ Py_BEGIN_ALLOW_THREADS
+ aRefImage = sipSelfWasArg ? sipCpp->HYDROData_Image::GetTrsfReferenceImage() :
+ sipCpp->GetTrsfReferenceImage();
+ Py_END_ALLOW_THREADS
+
+ sipRes = (HYDROData_Image*)createPointer( aRefImage );
+ %End
+
+ /**
+ * Removes the reference image for transformation
+ */
+ void RemoveTrsfReferenceImage();
+
+
+ /**
+ * Stores the transformation mode
+ */
+ void SetTrsfMode( const TransformationMode& theMode );
+
+ /**
+ * Returns the transformation mode
+ */
+ TransformationMode GetTrsfMode() const;
+
+
+ /**
+ * Returns the number of referenced objects
+ * \return zero if there is no references
+ */
+ int NbReferences() const;
+
+ /**
+ * Appends reference to other object (image or polyline).
+ * \param theReferenced the object referenced by this
+ */
+ void AppendReference( HYDROData_Entity theReferenced ) [void ( const opencascade::handle<HYDROData_Entity>& )];
+ %MethodCode
+ Handle(HYDROData_Entity) aRef = createHandle( a0 );
+ if ( !aRef.IsNull() )
+ {
+ Py_BEGIN_ALLOW_THREADS
+ sipSelfWasArg ? sipCpp->HYDROData_Image::AppendReference( aRef ) :
+ sipCpp->AppendReference( aRef );
+ Py_END_ALLOW_THREADS
+ }
+ %End
+
+ /**
+ * Returns reference by index.
+ * \param theIndex number of reference [0; NbReference)
+ * \returns the referenced object, or Null if index is invalid
+ */
+ HYDROData_Entity Reference( const int theIndex ) const [opencascade::handle<HYDROData_Entity> ()];
+ %MethodCode
+ Handle(HYDROData_Entity) aRef;
+
+ Py_BEGIN_ALLOW_THREADS
+ aRef = sipSelfWasArg ? sipCpp->HYDROData_Image::Reference( a0 ) :
+ sipCpp->Reference( a0 );
+ Py_END_ALLOW_THREADS
+
+ sipRes = createPointer( aRef );
+ %End
+
+ /**
+ * Updates reference by index. If index is one-bigger than \a NbReferences,
+ * this method appends it to the end (NbReferences is incremented).
+ * \param theIndex number of reference [0; NbReference]
+ * \param theReferenced the object referenced by this
+ */
+ void ChangeReference( const int theIndex, HYDROData_Entity theReferenced )
+ [void ( const int, const opencascade::handle<HYDROData_Entity>& )];
+ %MethodCode
+ Handle(HYDROData_Entity) aRef = createHandle( a1 );
+ if ( !aRef.IsNull() )
+ {
+ Py_BEGIN_ALLOW_THREADS
+ sipSelfWasArg ? sipCpp->HYDROData_Image::ChangeReference( a0, aRef ) :
+ sipCpp->ChangeReference( a0, aRef );
+ Py_END_ALLOW_THREADS
+ }
+ %End
+
+ /**
+ * Removes reference by index
+ * \param theIndex number of reference [0; NbReference)
+ */
+ void RemoveReference( const int theIndex );
+
+ /**
+ * Removes all references.
+ */
+ void ClearReferences();
+
+
+ /**
+ * Stores the operator name
+ * \param theOpName name of the operator that must be executed for image update
+ */
+ void SetOperatorName(const QString theOpName);
+
+ /**
+ * Returns the operator name
+ * \returns the name of the operator that must be executed for image update
+ */
+ QString OperatorName() const;
+
+ /**
+ * Stores the operator arguments
+ * \param theArgs array that stores the operator arguments, needed for execution
+ */
+ void SetArgs(const QByteArray& theArgs);
+
+ /**
+ * Returns the operator arguments
+ * \returns array that stores the operator arguments, needed for execution
+ */
+ QByteArray Args() const;
+
+
+ /**
+ * Marks the image as self-split.
+ * \param theFlag is true for self-split image
+ */
+ void SetIsSelfSplit(bool theFlag);
+
+ /**
+ * Checks that the image is self-split.
+ * \returns true if image is self-split
+ */
+ bool IsSelfSplit() const;
protected:
