refs #550: fix crash when myObject is NULL

[modules/hydro.git] / src / HYDROGUI / resources / HYDROGUI_msg_en.ts

diff --git a/src/HYDROGUI/resources/HYDROGUI_msg_en.ts b/src/HYDROGUI/resources/HYDROGUI_msg_en.ts
index a179a88153ede7c43050c7fe12928b1dc7c886c9..26122a32e4657d3a2a47eb7494f837f0291dfbaf 100644 (file)
--- a/src/HYDROGUI/resources/HYDROGUI_msg_en.ts
+++ b/src/HYDROGUI/resources/HYDROGUI_msg_en.ts
@@ -85,7 +85,7 @@
     </message>
     <message>
       <source>BATHYMETRY_FILTER</source>
-      <translation>Bathymetry files (*.xyz);;All files (*.* *)</translation>
+      <translation>Bathymetry files (*.xyz);;ASC files (*.asc);;All files (*.* *)</translation>
     </message>
     <message>
       <source>CASE_BOUNDARY</source>
@@ -101,7 +101,7 @@
     </message>
     <message>
       <source>CASE_SPLITTED_GROUPS</source>
-      <translation>Splitted groups</translation>
+      <translation>Split groups</translation>
     </message>
     <message>
       <source>FILE_CAN_NOT_BE_IMPORTED</source>
@@ -195,7 +195,7 @@ All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
     </message>
     <message>
       <source>COORDINATES_INFO</source>
-      <translation>X: %1, Y: %2</translation>
+      <translation>Local CS: (%1, %2); Global CS: (%3, %4)</translation>
     </message>
     <message>
       <source>POLYLINE3D_POLYLINE</source>
@@ -225,6 +225,26 @@ All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
       <source>STREAM_PROFILES</source>
       <translation>Profiles</translation>
     </message>
+    <message>
+      <source>PREF_TAB_GENERAL</source>
+      <translation>General</translation>
+    </message>
+    <message>
+      <source>PREF_GROUP_CURSOR</source>
+      <translation>Cursor for edition operations</translation>
+    </message>
+    <message>
+      <source>PREF_TYPE_OF_CURSOR</source>
+      <translation>Type</translation>
+    </message>
+    <message>
+      <source>PREF_GROUP_VIEWER</source>
+      <translation>Viewer</translation>
+    </message>
+    <message>
+      <source>PREF_VIEWER_AUTO_FITALL</source>
+      <translation>Make automatic fit all after show object operation</translation>
+    </message>
   </context>
 
   <context>
@@ -281,6 +301,22 @@ All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
       <source>EMPTY_GEOMETRY_OBJECTS</source>
       <translation>No one geometry object is selected, should be at least one.</translation>
     </message>
+    <message>
+      <source>MODE</source>
+      <translation>Mode</translation>
+    </message>
+    <message>
+      <source>AUTO</source>
+      <translation>Auto</translation>
+    </message>
+    <message>
+      <source>MANUAL</source>
+      <translation>Manual</translation>
+    </message>
+    <message>
+      <source>PRIORITY</source>
+      <translation>Priority</translation>
+    </message>
   </context>
 
   <context>
@@ -302,9 +338,29 @@ All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
       <translation>Regions list modification</translation>
     </message>
     <message>
-      <source>CONFIRM_SPLITTING_ZONES_RECALCULATION</source>
+      <source>ORDER_CHANGED</source>
+      <translation>Order of objects is changed</translation>
+    </message>
+    <message>
+      <source>CONFIRM_SPLITTING_ZONES_RECALCULATION_REGIONS</source>
       <translation>Case splitting zones already exist and will be recalculated after regions list modification. Do you confirm the recalculation?</translation>
     </message>
+    <message>
+      <source>MODE_CHANGED</source>
+      <translation>Change creation mode</translation>
+    </message>
+    <message>
+      <source>CONFIRM_SPLITTING_ZONES_RECALCULATION_MODE</source>
+      <translation>Case splitting zones already exist and will be recalculated after mode change. Do you confirm the recalculation?</translation>
+    </message>
+    <message>
+      <source>EMPTY_REGIONS</source>
+      <translation>Empty regions</translation>
+    </message>
+    <message>
+      <source>CONFIRM_CONTINUE_WITH_OBJECTS_NOT_INCLUDED_TO_REGION</source>
+      <translation>Region(s): %1 do not contain any objects. Do you want to continue?</translation>
+    </message>
   </context>
 
   <context>
@@ -317,6 +373,10 @@ All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
       <source>ALTITUDE_COLUMN</source>
       <translation>Altitude.Object</translation>
     </message>
+    <message>
+      <source>ZONE_TO_NEW_REGION</source>
+      <translation>Create a new region</translation>
+    </message>
   </context>
 
   <context>
@@ -392,6 +452,10 @@ First remove objects which are created on their basis.
   
   <context>
     <name>HYDROGUI_InputPanel</name>
+    <message>
+      <source>APPLY_AND_CLOSE</source>
+      <translation>Apply and Close</translation>
+    </message>
     <message>
       <source>APPLY</source>
       <translation>Apply</translation>
@@ -400,6 +464,10 @@ First remove objects which are created on their basis.
       <source>CANCEL</source>
       <translation>Cancel</translation>
     </message>
+    <message>
+      <source>CLOSE</source>
+      <translation>Close</translation>
+    </message>
     <message>
       <source>HELP</source>
       <translation>Help</translation>
@@ -708,7 +776,7 @@ Would you like to remove all references from the image?</translation>
     </message>
     <message>
       <source>DSK_EDIT_SPLITTED_IMAGE</source>
-      <translation>Edit splitted image</translation>
+      <translation>Edit split image</translation>
     </message>
     <message>
       <source>DSK_COPY_VIEWER_POSITION</source>
@@ -746,6 +814,10 @@ Would you like to remove all references from the image?</translation>
       <source>DSK_IMPORT_IMAGE</source>
       <translation>Import image</translation>
     </message>
+    <message>
+      <source>DSK_IMPORT_POLYLINE</source>
+      <translation>Import polyline from file(s)</translation>
+    </message>
     <message>
       <source>DSK_LOAD_VISUAL_STATE</source>
       <translation>Load visual state</translation>
@@ -826,6 +898,18 @@ Would you like to remove all references from the image?</translation>
       <source>DSK_COLOR</source>
       <translation>Set object color</translation>
     </message>
+    <message>
+      <source>DSK_ZLEVEL</source>
+      <translation>Change layer order</translation>
+    </message>
+    <message>
+      <source>DSK_EDIT_LOCAL_CS</source>
+      <translation>Change local CS</translation>
+    </message>
+    <message>
+      <source>DSK_SUBMERSIBLE</source>
+      <translation>Submersible</translation>
+    </message>
     <message>
       <source>MEN_CREATE_CALCULATION</source>
       <translation>Create calculation case</translation>
@@ -902,6 +986,10 @@ Would you like to remove all references from the image?</translation>
       <source>MEN_DESK_HYDRO</source>
       <translation>HYDRO</translation>
     </message>
+    <message>
+      <source>MEN_DESK_STREAM</source>
+      <translation>Stream</translation>
+    </message>
     <message>
       <source>MEN_DESK_NATURAL</source>
       <translation>Natural objects</translation>
@@ -948,7 +1036,7 @@ Would you like to remove all references from the image?</translation>
     </message>
     <message>
       <source>MEN_EDIT_SPLITTED_IMAGE</source>
-      <translation>Edit splitted image</translation>
+      <translation>Edit split image</translation>
     </message>
     <message>
       <source>MEN_COPY_VIEWER_POSITION</source>
@@ -986,6 +1074,10 @@ Would you like to remove all references from the image?</translation>
       <source>MEN_IMPORT_IMAGE</source>
       <translation>Import image</translation>
     </message>
+    <message>
+      <source>MEN_IMPORT_POLYLINE</source>
+      <translation>Import polyline</translation>
+    </message>
     <message>
       <source>MEN_LOAD_VISUAL_STATE</source>
       <translation>Load visual state</translation>
@@ -1070,6 +1162,18 @@ Would you like to remove all references from the image?</translation>
       <source>MEN_COLOR</source>
       <translation>Color</translation>
     </message>
+    <message>
+      <source>MEN_ZLEVEL</source>
+      <translation>Change layer order</translation>
+    </message>
+    <message>
+      <source>MEN_EDIT_LOCAL_CS</source>
+      <translation>Change local CS</translation>
+    </message>
+    <message>
+      <source>MEN_SUBMERSIBLE</source>
+      <translation>Submersible</translation>
+    </message>
     <message>
       <source>STB_CREATE_CALCULATION</source>
       <translation>Create calculation case</translation>
@@ -1168,7 +1272,7 @@ Would you like to remove all references from the image?</translation>
     </message>
     <message>
       <source>STB_EDIT_SPLITTED_IMAGE</source>
-      <translation>Edit splitted image</translation>
+      <translation>Edit split image</translation>
     </message>
     <message>
       <source>STB_COPY_VIEWER_POSITION</source>
@@ -1206,6 +1310,10 @@ Would you like to remove all references from the image?</translation>
       <source>STB_IMPORT_IMAGE</source>
       <translation>Import image</translation>
     </message>
+    <message>
+      <source>STB_IMPORT_POLYLINE</source>
+      <translation>Import polyline</translation>
+    </message>
     <message>
       <source>STB_LOAD_VISUAL_STATE</source>
       <translation>Load visual state</translation>
@@ -1286,6 +1394,59 @@ Would you like to remove all references from the image?</translation>
       <source>STB_COLOR</source>
       <translation>Set object color</translation>
     </message>
+    <message>
+      <source>STB_ZLEVEL</source>
+      <translation>Change layer order</translation>
+    </message>
+    <message>
+      <source>STB_EDIT_LOCAL_CS</source>
+      <translation>Change local CS</translation>
+    </message>
+
+    <message>
+      <source>MEN_CREATE_STREAM_BOTTOM</source>
+      <translation>Find bottom</translation>
+    </message>
+    <message>
+      <source>DSK_CREATE_STREAM_BOTTOM</source>
+      <translation>Create stream bottom polyline</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_STREAM_BOTTOM</source>
+      <translation>Creates the stream bottom polyline on selected stream object</translation>
+    </message>
+    <message>
+      <source>STB_SUBMERSIBLE</source>
+      <translation>If the object is submersible</translation>
+    </message>
+
+
+    <message>
+      <source>MEN_PROFILE_INTERPOLATE</source>
+      <translation>Profiles interpolation</translation>
+    </message>
+    <message>
+      <source>DSK_PROFILE_INTERPOLATE</source>
+      <translation>Interpolate the stream profiles</translation>
+    </message>
+    <message>
+      <source>STB_PROFILE_INTERPOLATE</source>
+      <translation>Creates the new stream profiles using interpolation of selected ones</translation>
+    </message>
+
+    <message>
+      <source>MEN_RECOGNIZE_CONTOURS</source>
+      <translation>Recognize contours</translation>
+    </message>
+    <message>
+      <source>DSK_RECOGNIZE_CONTOURS</source>
+      <translation>Recognize contours</translation>
+    </message>
+    <message>
+      <source>STB_RECOGNIZE_CONTOURS</source>
+      <translation>Recognize contours</translation>
+    </message>
+
   </context>
   
   <context>
@@ -1427,6 +1588,14 @@ Would you like to remove all references from the image?</translation>
       <translation>Bathymetry</translation>
     </message>
   </context>
+
+  <context>
+    <name>HYDROGUI_ViewerDlg</name>
+    <message>
+      <source>UZ_COORDINATES_INFO</source>
+      <translation>U: %1, Z: %2</translation>
+    </message>
+  </context>
   
   <context>
     <name>HYDROGUI_ProfileDlg</name>
@@ -1442,10 +1611,6 @@ Would you like to remove all references from the image?</translation>
       <source>PROFILE_NAME_TLT</source>
       <translation>Name</translation>
     </message>
-    <message>
-      <source>UZ_COORDINATES_INFO</source>
-      <translation>U: %1, Z: %2</translation>
-    </message>
     <message>
       <source>U_TITLE</source>
       <translation>U</translation>
@@ -1524,7 +1689,7 @@ Would you like to remove all references from the image?</translation>
     </message>
     <message>
       <source>EDIT_SPLITTED_IMAGE</source>
-      <translation>Edit splitted image</translation>
+      <translation>Edit split image</translation>
     </message>
     <message>
       <source>FUSE</source>
@@ -1608,6 +1773,14 @@ Would you like to remove all references from the image?</translation>
     </message>
   </context>
 
+  <context>
+    <name>HYDROGUI_LocalCSOp</name>
+    <message>
+      <source>EDIT_LOCAL_CS</source>
+      <translation>Local CS transformation</translation>
+    </message>
+  </context>
+
   <context>
     <name>HYDROGUI_ImportGeomObjectOp</name>
     <message>
@@ -1756,6 +1929,34 @@ file cannot be correctly imported for an Obstacle definition.</translation>
 </translation>
     </message>
   </context>
+
+  <context>
+    <name>HYDROGUI_ImportPolylineOp</name>
+    <message>
+      <source>IMPORT_POLYLINE</source>
+      <translation>Import Polyline</translation>
+    </message>
+    <message>
+      <source>POLYLINE_FILTER</source>
+      <translation>SinusX Files (*.sx)</translation>
+    </message>
+    <message>
+      <source>BAD_IMPORTED_POLYLINE_FILES_TLT</source>
+      <translation>Polyline import error</translation>
+    </message>
+    <message>
+      <source>NO_ONE_POLYLINE_IMPORTED</source>
+      <translation>Polyline cannot be read from seleted file</translation>
+    </message>
+    <message>
+      <source>BAD_IMPORTED_POLYLINE_FILES</source>
+      <translation>The data from following files cannot be completely imported:
+%1
+</translation>
+    </message>
+
+  </context>
+
    
   <context>
     <name>HYDROGUI_GeoreferencementDlg</name>
@@ -2057,4 +2258,204 @@ Polyline should consist from one not closed curve.</translation>
     </message>
   </context>
 
+  <context>
+    <name>HYDROGUI_ZLevelsDlg</name>
+    <message>
+        <source>CHANGE_LAYER_ORDER</source>
+        <translation>Change layer order</translation>
+    </message>
+    <message>
+        <source>ALL_OBJECTS</source>
+        <translation>All objects</translation>
+    </message>
+    <message>
+        <source>ALL_OBJECTS_UNCHECKED_TLT</source>
+        <translation>Include hidden objects to the list</translation>
+    </message>
+    <message>
+        <source>ALL_OBJECTS_CHECKED_TLT</source>
+        <translation>Exclude hidden objects from the list</translation>
+    </message>
+    <message>
+      <source>APPLY_AND_CLOSE</source>
+      <translation>Apply and Close</translation>
+    </message>
+    <message>
+        <source>APPLY</source>
+        <translation>Apply</translation>
+    </message>
+    <message>
+        <source>CLOSE</source>
+        <translation>Close</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_OrderedListWidget</name>
+    <message>
+        <source>TOP_TLT</source>
+        <translation>Move the item(s) on top</translation>
+    </message>
+    <message>
+        <source>UP_TLT</source>
+        <translation>Move the item(s) up</translation>
+    </message>
+    <message>
+        <source>DOWN_TLT</source>
+        <translation>Move the item(s) down</translation>
+    </message>
+    <message>
+        <source>BOTTOM_TLT</source>
+        <translation>Move the item(s) on bottom</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_PriorityWidget</name>
+    <message>
+      <source>ADD</source>
+      <translation>Add</translation>
+    </message>
+    <message>
+      <source>REMOVE</source>
+      <translation>Remove</translation>
+    </message>
+    <message>
+      <source>CLEAR_ALL</source>
+      <translation>Clear all</translation>
+    </message>
+    <message>
+      <source>INCORRECT_INPUT</source>
+      <translation>Incorrect input</translation>
+    </message>
+  </context>
+  
+  <context>
+    <name>HYDROGUI_PriorityTableModel</name>
+    <message>
+      <source>LESS</source>
+      <translation>&lt;</translation>
+    </message>
+    <message>
+      <source>GREATER</source>
+      <translation>&gt;</translation>
+    </message>
+    <message>
+      <source>PRIORITY</source>
+      <translation>Priority</translation>
+    </message>
+    <message>
+      <source>ZMIN</source>
+      <translation>Zmin</translation>
+    </message>
+    <message>
+      <source>ZMAX</source>
+      <translation>Zmax</translation>
+    </message>
+    <message>
+      <source>OBJECT1</source>
+      <translation>Object 1</translation>
+    </message>
+    <message>
+      <source>OBJECT2</source>
+      <translation>Object 2</translation>
+    </message>
+    <message>
+      <source>BATHYMETRY</source>
+      <translation>Bathymetry</translation>
+    </message>
+    <message>
+      <source>ALREADY_EXISTS</source>
+      <translation>The selected objects combination already exists.</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_RiverBottomDlg</name>
+    <message>
+      <source>STREAM_OBJECT</source>
+      <translation>Stream object</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_RiverBottomOp</name>
+    <message>
+      <source>FIND_STREAM_BOTTOM</source>
+      <translation>Find stream bottom</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ProfileInterpolateDlg</name>
+    <message>
+      <source>STREAM_OBJECT</source>
+      <translation>Stream object</translation>
+    </message>
+    <message>
+      <source>INTERPOLATOR</source>
+      <translation>Interpolator</translation>
+    </message>
+    <message>
+      <source>DESCRIPTION</source>
+      <translation>Description</translation>
+    </message>
+    <message>
+      <source>PROFILE_1</source>
+      <translation>Profile 1</translation>
+    </message>
+    <message>
+      <source>PROFILE_2</source>
+      <translation>Profile 2</translation>
+    </message>
+    <message>
+      <source>NUMBER_OF_PROFILES</source>
+      <translation>Number of profiles</translation>
+    </message>
+    <message>
+      <source>PARAMETERS</source>
+      <translation>Parameters</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ProfileInterpolateOp</name>
+    <message>
+      <source>PROFILE_INTERPOLATION</source>
+      <translation>Profile interpolation</translation>
+    </message>
+    <message>
+      <source>INTERPOLATION_ERROR</source>
+      <translation>Interpolation error</translation>
+    </message>
+    <message>
+      <source>CALCULATE_ERROR</source>
+      <translation>Can't perform calculation: %1</translation>
+    </message>
+    <message>
+      <source>CANT_GET_STREAM_OBJECT</source>
+      <translation>Can't obtain stream oject \"%1\"</translation>
+    </message>
+  </context>
+  
+  <context>
+    <name>HYDROGUI_RecognizeContoursDlg</name>
+    <message>
+      <source>RECOGNIZED_POLYLINES</source>
+      <translation>Recognized polylines</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_RecognizeContoursOp</name>
+    <message>
+      <source>CONTOURS_RECOGNITION</source>
+      <translation>Contours recognition</translation>
+    </message>
+    <message>
+      <source>NO_DETECTED_CONTOURS</source>
+      <translation>No contours were detected.</translation>
+    </message>
+  </context>
+
 </TS>