global misprinting in the word "splitted" is replaced by "split"

[modules/hydro.git] / src / HYDROGUI / resources / HYDROGUI_msg_en.ts

diff --git a/src/HYDROGUI/resources/HYDROGUI_msg_en.ts b/src/HYDROGUI/resources/HYDROGUI_msg_en.ts
index 862778450422773bd8e51b45537fdec8a21282cc..31619c9c843ad5555fe9eca3021d391c095f8914 100644 (file)
--- a/src/HYDROGUI/resources/HYDROGUI_msg_en.ts
+++ b/src/HYDROGUI/resources/HYDROGUI_msg_en.ts
@@ -43,6 +43,14 @@
       <source>DEFAULT_IMMERSIBLE_ZONE_NAME</source>
       <translation>Immersible zone</translation>
     </message>
+    <message>
+      <source>DEFAULT_STRICKLER_TABLE_NAME</source>
+      <translation>Strickler table</translation>
+    </message>
+    <message>
+      <source>DEFAULT_LAND_COVER_MAP_NAME</source>
+      <translation>Land cover map</translation>
+    </message>
     <message>
       <source>IMAGES</source>
       <translation>IMAGES</translation>
@@ -75,6 +83,14 @@
       <source>OBSTACLES</source>
       <translation>OBSTACLES</translation>
     </message>
+    <message>
+      <source>STRICKLER_TABLES</source>
+      <translation>STRICKLER TABLES</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_MAPS</source>
+      <translation>LAND COVER MAPS</translation>
+    </message>
     <message>
       <source>ARTIFICIAL_OBJECTS</source>
       <translation>ARTIFICIAL OBJECTS</translation>
@@ -85,7 +101,7 @@
     </message>
     <message>
       <source>BATHYMETRY_FILTER</source>
-      <translation>Bathymetry files (*.xyz);;All files (*.* *)</translation>
+      <translation>Bathymetry files (*.xyz);;ASC files (*.asc);;All files (*.* *)</translation>
     </message>
     <message>
       <source>CASE_BOUNDARY</source>
@@ -100,7 +116,11 @@
       <translation>REGIONS</translation>
     </message>
     <message>
-      <source>CASE_SPLITTED_GROUPS</source>
+      <source>CASE_LAND_COVER_MAP</source>
+      <translation>LAND COVER MAP</translation>
+    </message>
+    <message>
+      <source>CASE_SPLIT_GROUPS</source>
       <translation>Split groups</translation>
     </message>
     <message>
@@ -237,6 +257,30 @@ All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
       <source>PREF_TYPE_OF_CURSOR</source>
       <translation>Type</translation>
     </message>
+    <message>
+      <source>PREF_GROUP_VIEWER</source>
+      <translation>Viewer</translation>
+    </message>
+    <message>
+      <source>PREF_VIEWER_AUTO_FITALL</source>
+      <translation>Make automatic fit all after show object operation</translation>
+    </message>
+    <message>
+      <source>PREF_GROUP_STRICKLER_TABLE</source>
+      <translation>Strickler table</translation>
+    </message>
+    <message>
+      <source>PREF_DEFAULT_STRICKLER_COEFFICIENT</source>
+      <translation>Default Strickler coefficient</translation>
+    </message>
+    <message>
+      <source>STRICKLER_TABLE_FILTER</source>
+      <translation>Strickler table files (*.txt);;All files (*.* *)</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_POLYLINES</source>
+      <translation>Polylines</translation>
+    </message>
   </context>
 
   <context>
@@ -309,6 +353,26 @@ All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
       <source>PRIORITY</source>
       <translation>Priority</translation>
     </message>
+    <message>
+      <source>STRICKLER_TABLE</source>
+      <translation>Strickler table</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_MAP</source>
+      <translation>Land cover map</translation>
+    </message>
+    <message>
+      <source>STRICKLER_TYPE</source>
+      <translation>Strickler type from land cover</translation>
+    </message>
+    <message>
+      <source>RESULTS_ON_GEOMETRY_OBJECTS</source>
+      <translation>Results on geometry objects</translation>
+    </message>
+    <message>
+      <source>REGENERATE_COLORS</source>
+      <translation>Regenerate colors</translation>
+    </message>
   </context>
 
   <context>
@@ -329,6 +393,14 @@ All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
       <source>REGIONS_CHANGED</source>
       <translation>Regions list modification</translation>
     </message>
+    <message>
+      <source>ORDER_CHANGED</source>
+      <translation>Order of objects is changed</translation>
+    </message>
+    <message>
+      <source>RULE_CHANGED</source>
+      <translation>Priority rule for objects is changed</translation>
+    </message>
     <message>
       <source>CONFIRM_SPLITTING_ZONES_RECALCULATION_REGIONS</source>
       <translation>Case splitting zones already exist and will be recalculated after regions list modification. Do you confirm the recalculation?</translation>
@@ -349,6 +421,14 @@ All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
       <source>CONFIRM_CONTINUE_WITH_OBJECTS_NOT_INCLUDED_TO_REGION</source>
       <translation>Region(s): %1 do not contain any objects. Do you want to continue?</translation>
     </message>
+    <message>
+      <source>CONFIRM_LAND_COVER_PARTITION_RECALCULATION_REGIONS</source>
+      <translation>Case land covers partition already exists and will be recalculated after regions list modification. Do you confirm the recalculation?</translation>
+    </message>
+    <message>
+      <source>CONFIRM_LAND_COVER_PARTITION_RECALCULATION_MODE</source>
+      <translation>Case land covers partition already exists and will be recalculated after mode change. Do you confirm the recalculation?</translation>
+    </message>
   </context>
 
   <context>
@@ -361,6 +441,14 @@ All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
       <source>ALTITUDE_COLUMN</source>
       <translation>Altitude.Object</translation>
     </message>
+    <message>
+      <source>LAND_COVER_COLUMN</source>
+      <translation>Land cover</translation>
+    </message>
+    <message>
+      <source>ZONE_TO_NEW_REGION</source>
+      <translation>Create a new region</translation>
+    </message>
   </context>
 
   <context>
@@ -371,6 +459,14 @@ All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
     </message>
   </context>
 
+  <context>
+    <name>HYDROGUI_DuplicateOp</name>
+    <message>
+      <source>DUPLICATE</source>
+      <translation>Duplicate</translation>
+    </message>
+  </context>
+
   <context>
     <name>HYDROGUI_CopyPastePositionOp</name>
     <message>
@@ -408,6 +504,16 @@ First remove objects which are created on their basis.
       <source>DELETE_OBJECT_IS_USED_FOR</source>
       <translation>Object "%1" is used for %2</translation>
     </message>
+    <message>
+      <source>DELETE_LAST_TABLE_WRN</source>
+      <translation>You are about to delete all Strickler tables in the study.
+After that the study will contain only the default Strickler table.
+Do you want to continue?</translation>
+    </message>
+    <message>
+      <source>WARNING</source>
+      <translation>Warning</translation>
+    </message>
   </context>
 
   <context>
@@ -436,6 +542,10 @@ First remove objects which are created on their basis.
   
   <context>
     <name>HYDROGUI_InputPanel</name>
+    <message>
+      <source>APPLY_AND_CLOSE</source>
+      <translation>Apply and Close</translation>
+    </message>
     <message>
       <source>APPLY</source>
       <translation>Apply</translation>
@@ -444,6 +554,10 @@ First remove objects which are created on their basis.
       <source>CANCEL</source>
       <translation>Cancel</translation>
     </message>
+    <message>
+      <source>CLOSE</source>
+      <translation>Close</translation>
+    </message>
     <message>
       <source>HELP</source>
       <translation>Help</translation>
@@ -650,6 +764,14 @@ Would you like to remove all references from the image?</translation>
       <source>CANT_LOAD_GEOREFERENCEMENT_FILE</source>
       <translation>Can't load data from the image georeferencement file.</translation>
     </message>
+    <message>
+      <source>SELECT_IMAGE_NAME</source>
+      <translation>The image name is not input</translation>
+    </message>
+    <message>
+      <source>SELECT_IMAGE_FILE</source>
+      <translation>The image file is not chosen</translation>
+    </message>
   </context>
   
   <context>
@@ -676,7 +798,7 @@ Would you like to remove all references from the image?</translation>
     </message>
     <message>
       <source>DSK_GEOREFERENCEMENT</source>
-      <translation>Profile(s) georeferencement</translation>
+      <translation>Profiles georeferencement</translation>
     </message>
     <message>
       <source>DSK_CREATE_IMMERSIBLE_ZONE</source>
@@ -710,6 +832,46 @@ Would you like to remove all references from the image?</translation>
       <source>DSK_EDIT_DIGUE</source>
       <translation>Edit digue</translation>
     </message>
+    <message>
+      <source>DSK_IMPORT_STRICKLER_TABLE</source>
+      <translation>Import Strickler table</translation>
+    </message>
+    <message>
+      <source>DSK_EXPORT_STRICKLER_TABLE</source>
+      <translation>Export Strickler table</translation>
+    </message>
+    <message>
+      <source>DSK_EDIT_STRICKLER_TABLE</source>
+      <translation>Edit Strickler table</translation>
+    </message>
+    <message>
+      <source>DSK_DUPLICATE_STRICKLER_TABLE</source>
+      <translation>Duplicate Strickler table</translation>
+    </message>
+    <message>
+      <source>DSK_CREATE_LAND_COVER_MAP</source>
+      <translation>Create land cover map</translation>
+    </message>
+    <message>
+      <source>DSK_ADD_LAND_COVER</source>
+      <translation>Add land cover</translation>
+    </message>
+    <message>
+      <source>DSK_REMOVE_LAND_COVER</source>
+      <translation>Remove land cover</translation>
+    </message>
+    <message>
+      <source>DSK_SPLIT_LAND_COVER</source>
+      <translation>Split land cover(s)</translation>
+    </message>
+    <message>
+      <source>DSK_MERGE_LAND_COVER</source>
+      <translation>Merge land covers</translation>
+    </message>
+    <message>
+      <source>DSK_CHANGE_LAND_COVER_TYPE</source>
+      <translation>Change land cover(s) type</translation>
+    </message>
     <message>
       <source>DSK_COPY</source>
       <translation>Copy</translation>
@@ -751,7 +913,7 @@ Would you like to remove all references from the image?</translation>
       <translation>Edit polyline 3D</translation>
     </message>
     <message>
-      <source>DSK_EDIT_SPLITTED_IMAGE</source>
+      <source>DSK_EDIT_SPLIT_IMAGE</source>
       <translation>Edit split image</translation>
     </message>
     <message>
@@ -790,6 +952,22 @@ Would you like to remove all references from the image?</translation>
       <source>DSK_IMPORT_IMAGE</source>
       <translation>Import image</translation>
     </message>
+    <message>
+      <source>DSK_IMPORT_POLYLINE</source>
+      <translation>Import polyline from file(s)</translation>
+    </message>
+    <message>
+      <source>DSK_IMPORT_LANDCOVER_MAP</source>
+      <translation>Import land cover map from file(s)</translation>
+    </message>
+    <message>
+      <source>DSK_IMPORT_SINUSX</source>
+      <translation>Import from SinusX</translation>
+    </message>
+    <message>
+      <source>DSK_EXPORT_SINUSX</source>
+      <translation>Export to SinusX</translation>
+    </message>
     <message>
       <source>DSK_LOAD_VISUAL_STATE</source>
       <translation>Load visual state</translation>
@@ -830,6 +1008,14 @@ Would you like to remove all references from the image?</translation>
       <source>DSK_SPLIT_IMAGE</source>
       <translation>Split image</translation>
     </message>
+    <message>
+      <source>DSK_SPLIT_POLYLINES</source>
+      <translation>Split polylines</translation>
+    </message>
+    <message>
+      <source>DSK_MERGE_POLYLINES</source>
+      <translation>Merge polylines</translation>
+    </message>
     <message>
       <source>DSK_UNDO</source>
       <translation>Undo</translation>
@@ -870,6 +1056,10 @@ Would you like to remove all references from the image?</translation>
       <source>DSK_COLOR</source>
       <translation>Set object color</translation>
     </message>
+    <message>
+      <source>DSK_TRANSPARENCY</source>
+      <translation>Set object transparency</translation>
+    </message>
     <message>
       <source>DSK_ZLEVEL</source>
       <translation>Change layer order</translation>
@@ -878,6 +1068,19 @@ Would you like to remove all references from the image?</translation>
       <source>DSK_EDIT_LOCAL_CS</source>
       <translation>Change local CS</translation>
     </message>
+    <message>
+      <source>DSK_SUBMERSIBLE</source>
+      <translation>Submersible</translation>
+    </message>
+    <message>
+      <source>DSK_EXPORT_TO_SHAPE_FILE</source>
+      <translation>Export</translation>
+    </message>
+    <message>
+      <source>DSK_POLYLINE_EXTRACTION</source>
+      <translation>Extracts the polyline from selected object</translation>
+    </message>
+
     <message>
       <source>MEN_CREATE_CALCULATION</source>
       <translation>Create calculation case</translation>
@@ -938,6 +1141,46 @@ Would you like to remove all references from the image?</translation>
       <source>MEN_EDIT_DIGUE</source>
       <translation>Edit digue</translation>
     </message>
+    <message>
+      <source>MEN_IMPORT_STRICKLER_TABLE</source>
+      <translation>Import Strickler table</translation>
+    </message>
+    <message>
+      <source>MEN_EXPORT_STRICKLER_TABLE</source>
+      <translation>Export Strickler table</translation>
+    </message>
+    <message>
+      <source>MEN_EDIT_STRICKLER_TABLE</source>
+      <translation>Edit Strickler table</translation>
+    </message>
+    <message>
+      <source>MEN_DUPLICATE_STRICKLER_TABLE</source>
+      <translation>Duplicate Strickler table</translation>
+    </message>
+    <message>
+      <source>MEN_CREATE_LAND_COVER_MAP</source>
+      <translation>Create land cover map</translation>
+    </message>
+    <message>
+      <source>MEN_ADD_LAND_COVER</source>
+      <translation>Add land cover</translation>
+    </message>
+    <message>
+      <source>MEN_REMOVE_LAND_COVER</source>
+      <translation>Remove land cover</translation>
+    </message>
+    <message>
+      <source>MEN_SPLIT_LAND_COVER</source>
+      <translation>Split land cover(s)</translation>
+    </message>
+    <message>
+      <source>MEN_MERGE_LAND_COVER</source>
+      <translation>Merge land covers</translation>
+    </message>
+    <message>
+      <source>MEN_CHANGE_LAND_COVER_TYPE</source>
+      <translation>Change land cover(s) type</translation>
+    </message>
     <message>
       <source>MEN_CUT_IMAGES</source>
       <translation>Cut images</translation>
@@ -970,6 +1213,18 @@ Would you like to remove all references from the image?</translation>
       <source>MEN_DESK_PROFILE</source>
       <translation>Profile</translation>
     </message>
+    <message>
+      <source>MEN_DESK_IMAGE</source>
+      <translation>Image</translation>
+    </message>
+    <message>
+      <source>MEN_DESK_POLYLINE</source>
+      <translation>Polyline</translation>
+    </message>
+    <message>
+      <source>MEN_DESK_LAND_COVER_MAP</source>
+      <translation>Land cover map</translation>
+    </message>
     <message>
       <source>MEN_EDIT_CALCULATION</source>
       <translation>Edit calculation case</translation>
@@ -1003,7 +1258,7 @@ Would you like to remove all references from the image?</translation>
       <translation>Edit profile</translation>
     </message>
     <message>
-      <source>MEN_EDIT_SPLITTED_IMAGE</source>
+      <source>MEN_EDIT_SPLIT_IMAGE</source>
       <translation>Edit split image</translation>
     </message>
     <message>
@@ -1042,6 +1297,22 @@ Would you like to remove all references from the image?</translation>
       <source>MEN_IMPORT_IMAGE</source>
       <translation>Import image</translation>
     </message>
+    <message>
+      <source>MEN_IMPORT_POLYLINE</source>
+      <translation>Import polyline</translation>
+    </message>
+    <message>
+      <source>MEN_IMPORT_LANDCOVER_MAP</source>
+      <translation>Import land cover map from file(s)</translation>
+    </message>
+    <message>
+      <source>MEN_IMPORT_SINUSX</source>
+      <translation>Import from SinusX</translation>
+    </message>
+    <message>
+      <source>MEN_EXPORT_SINUSX</source>
+      <translation>Export to SinusX</translation>
+    </message>
     <message>
       <source>MEN_LOAD_VISUAL_STATE</source>
       <translation>Load visual state</translation>
@@ -1086,6 +1357,14 @@ Would you like to remove all references from the image?</translation>
       <source>MEN_SPLIT_IMAGE</source>
       <translation>Split image</translation>
     </message>
+    <message>
+      <source>MEN_SPLIT_POLYLINES</source>
+      <translation>Split polylines</translation>
+    </message>
+    <message>
+      <source>MEN_MERGE_POLYLINES</source>
+      <translation>Merge polylines</translation>
+    </message>
     <message>
       <source>MEN_UNDO</source>
       <translation>Undo</translation>
@@ -1126,6 +1405,10 @@ Would you like to remove all references from the image?</translation>
       <source>MEN_COLOR</source>
       <translation>Color</translation>
     </message>
+    <message>
+      <source>MEN_TRANSPARENCY</source>
+      <translation>Transparency</translation>
+    </message>
     <message>
       <source>MEN_ZLEVEL</source>
       <translation>Change layer order</translation>
@@ -1134,6 +1417,19 @@ Would you like to remove all references from the image?</translation>
       <source>MEN_EDIT_LOCAL_CS</source>
       <translation>Change local CS</translation>
     </message>
+    <message>
+      <source>MEN_SUBMERSIBLE</source>
+      <translation>Submersible</translation>
+    </message>
+    <message>
+      <source>MEN_EXPORT_TO_SHAPE_FILE</source>
+      <translation>Export</translation>
+    </message>
+    <message>
+      <source>MEN_POLYLINE_EXTRACTION</source>
+      <translation>Polyline extraction</translation>
+    </message>
+
     <message>
       <source>STB_CREATE_CALCULATION</source>
       <translation>Create calculation case</translation>
@@ -1156,7 +1452,7 @@ Would you like to remove all references from the image?</translation>
     </message>
     <message>
       <source>STB_GEOREFERENCEMENT</source>
-      <translation>Profile(s) georeferencement</translation>
+      <translation>Profiles georeferencement</translation>
     </message>
     <message>
       <source>STB_CREATE_IMMERSIBLE_ZONE</source>
@@ -1190,6 +1486,46 @@ Would you like to remove all references from the image?</translation>
       <source>STB_EDIT_DIGUE</source>
       <translation>Edit digue</translation>
     </message>
+    <message>
+      <source>STB_IMPORT_STRICKLER_TABLE</source>
+      <translation>Import Strickler table</translation>
+    </message>
+    <message>
+      <source>STB_EXPORT_STRICKLER_TABLE</source>
+      <translation>Export Strickler table</translation>
+    </message>
+    <message>
+      <source>STB_EDIT_STRICKLER_TABLE</source>
+      <translation>Edit Strickler table</translation>
+    </message>
+    <message>
+      <source>STB_DUPLICATE_STRICKLER_TABLE</source>
+      <translation>Duplicate Strickler table</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_LAND_COVER_MAP</source>
+      <translation>Create land cover map</translation>
+    </message>
+    <message>
+      <source>STB_ADD_LAND_COVER</source>
+      <translation>Add land cover</translation>
+    </message>
+    <message>
+      <source>STB_REMOVE_LAND_COVER</source>
+      <translation>Remove land cover</translation>
+    </message>
+    <message>
+      <source>STB_SPLIT_LAND_COVER</source>
+      <translation>Split land cover(s)</translation>
+    </message>
+    <message>
+      <source>STB_MERGE_LAND_COVER</source>
+      <translation>Merge land covers</translation>
+    </message>
+    <message>
+      <source>STB_CHANGE_LAND_COVER_TYPE</source>
+      <translation>Change land cover(s) type</translation>
+    </message>
     <message>
       <source>STB_COPY</source>
       <translation>Copy</translation>
@@ -1231,7 +1567,7 @@ Would you like to remove all references from the image?</translation>
       <translation>Edit polyline 3D</translation>
     </message>
     <message>
-      <source>STB_EDIT_SPLITTED_IMAGE</source>
+      <source>STB_EDIT_SPLIT_IMAGE</source>
       <translation>Edit split image</translation>
     </message>
     <message>
@@ -1270,6 +1606,22 @@ Would you like to remove all references from the image?</translation>
       <source>STB_IMPORT_IMAGE</source>
       <translation>Import image</translation>
     </message>
+    <message>
+      <source>STB_IMPORT_POLYLINE</source>
+      <translation>Import polyline</translation>
+    </message>
+    <message>
+      <source>STB_IMPORT_LANDCOVER_MAP</source>
+      <translation>Import land cover map from file(s)</translation>
+    </message>
+    <message>
+      <source>STB_IMPORT_SINUSX</source>
+      <translation>Import from SinusX</translation>
+    </message>
+    <message>
+      <source>STB_EXPORT_SINUSX</source>
+      <translation>Export to SinusX</translation>
+    </message>
     <message>
       <source>STB_LOAD_VISUAL_STATE</source>
       <translation>Load visual state</translation>
@@ -1310,6 +1662,14 @@ Would you like to remove all references from the image?</translation>
       <source>STB_SPLIT_IMAGE</source>
       <translation>Split image</translation>
     </message>
+    <message>
+      <source>STB_SPLIT_POLYLINES</source>
+      <translation>Split polylines</translation>
+    </message>
+    <message>
+      <source>STB_MERGE_POLYLINES</source>
+      <translation>Merge polylines</translation>
+    </message>
     <message>
       <source>STB_UNDO</source>
       <translation>Undo</translation>
@@ -1350,6 +1710,10 @@ Would you like to remove all references from the image?</translation>
       <source>STB_COLOR</source>
       <translation>Set object color</translation>
     </message>
+    <message>
+      <source>STB_TRANSPARENCY</source>
+      <translation>Set object transparency</translation>
+    </message>
     <message>
       <source>STB_ZLEVEL</source>
       <translation>Change layer order</translation>
@@ -1358,6 +1722,10 @@ Would you like to remove all references from the image?</translation>
       <source>STB_EDIT_LOCAL_CS</source>
       <translation>Change local CS</translation>
     </message>
+    <message>
+      <source>STB_POLYLINE_EXTRACTION</source>
+      <translation>Polyline extractions</translation>
+    </message>
 
     <message>
       <source>MEN_CREATE_STREAM_BOTTOM</source>
@@ -1371,6 +1739,15 @@ Would you like to remove all references from the image?</translation>
       <source>STB_CREATE_STREAM_BOTTOM</source>
       <translation>Creates the stream bottom polyline on selected stream object</translation>
     </message>
+    <message>
+      <source>STB_SUBMERSIBLE</source>
+      <translation>If the object is submersible</translation>
+    </message>
+    <message>
+      <source>STB_EXPORT_TO_SHAPE_FILE</source>
+      <translation>Export</translation>
+    </message>
+
 
     <message>
       <source>MEN_PROFILE_INTERPOLATE</source>
@@ -1385,6 +1762,45 @@ Would you like to remove all references from the image?</translation>
       <translation>Creates the new stream profiles using interpolation of selected ones</translation>
     </message>
 
+    <message>
+      <source>MEN_RECOGNIZE_CONTOURS</source>
+      <translation>Recognize contours</translation>
+    </message>
+    <message>
+      <source>DSK_RECOGNIZE_CONTOURS</source>
+      <translation>Recognize contours</translation>
+    </message>
+    <message>
+      <source>STB_RECOGNIZE_CONTOURS</source>
+      <translation>Recognize contours</translation>
+    </message>
+
+    <message>
+      <source>MEN_LC_SCALARMAP_COLORING_ON</source>
+      <translation>Use as scalar scale</translation>
+    </message>
+    <message>
+      <source>DSK_LC_SCALARMAP_COLORING_ON</source>
+      <translation>Use the table as a scalar scale for Land Covers coloring</translation>
+    </message>
+    <message>
+      <source>STB_LC_SCALARMAP_COLORING_ON</source>
+      <translation>Use as scalar scale</translation>
+    </message>
+
+    <message>
+      <source>MEN_LC_SCALARMAP_COLORING_OFF</source>
+      <translation>Scalar map mode off</translation>
+    </message>
+    <message>
+      <source>DSK_LC_SCALARMAP_COLORING_OFF</source>
+      <translation>Turn off Land Covers scalar map coloring mode</translation>
+    </message>
+    <message>
+      <source>STB_LC_SCALARMAP_COLORING_OFF</source>
+      <translation>Scalar map mode off</translation>
+    </message>
+
   </context>
   
   <context>
@@ -1626,7 +2042,7 @@ Would you like to remove all references from the image?</translation>
       <translation>Edit fused image</translation>
     </message>
     <message>
-      <source>EDIT_SPLITTED_IMAGE</source>
+      <source>EDIT_SPLIT_IMAGE</source>
       <translation>Edit split image</translation>
     </message>
     <message>
@@ -1867,59 +2283,284 @@ file cannot be correctly imported for an Obstacle definition.</translation>
 </translation>
     </message>
   </context>
-   
+
   <context>
-    <name>HYDROGUI_GeoreferencementDlg</name>
+    <name>HYDROGUI_ImportPolylineOp</name>
     <message>
-      <source>PROFILES</source>
-      <translation>Profiles</translation>
+      <source>IMPORT_POLYLINE</source>
+      <translation>Import Polyline</translation>
     </message>
     <message>
-      <source>ALL_MODE</source>
-      <translation>All</translation>
+      <source>POLYLINE_FILTER</source>
+      <translation>Shape files (*.shp)</translation>
     </message>
     <message>
-      <source>SELECTED_MODE</source>
-      <translation>Selected</translation>
+      <source>BAD_IMPORTED_POLYLINE_FILES_TLT</source>
+      <translation>Polyline import error</translation>
     </message>
     <message>
-      <source>UPDATE_SELECTION</source>
-      <translation>Update selection</translation>
+      <source>NO_ONE_POLYLINE_IMPORTED</source>
+      <translation>Polyline cannot be read from seleted file</translation>
     </message>
     <message>
-      <source>PROFILE_HEADER</source>
-      <translation>Profile</translation>
+      <source>BAD_IMPORTED_POLYLINE_FILES</source>
+      <translation>The data from following files cannot be completely imported:
+%1
+</translation>
     </message>
+
+  </context>
+
+ <context>
+    <name>HYDROGUI_ImportLandCoverMapDlg</name>
     <message>
-      <source>XG_HEADER</source>
-      <translation>Xg</translation>
+      <source>LANDCOVERMAP_FILTER</source>
+      <translation>Shape files (*.shp)</translation>
     </message>
     <message>
-      <source>YG_HEADER</source>
-      <translation>Yg</translation>
+      <source>IMPORT_LANDCOVER_MAP_FROM_FILE</source>
+      <translation>Import land cover map from file</translation>
     </message>
     <message>
-      <source>XD_HEADER</source>
-      <translation>Xd</translation>
+      <source>FILE_NAME</source>
+      <translation>File name</translation>
     </message>
     <message>
-      <source>YD_HEADER</source>
-      <translation>Yd</translation>
+      <source>LANDCOVERMAP_NAME</source>
+      <translation>Land cover map name</translation>
     </message>
-  </context>
- 
-  <context>
-    <name>HYDROGUI_GeoreferencementOp</name>
     <message>
-      <source>PROFILES_GEOREFERENCEMENT</source>
-      <translation>Profiles georeferencement</translation>
+      <source>NAME</source>
+      <translation>Name</translation>
     </message>
     <message>
-      <source>INCOMPLETE_DATA</source>
-      <translation>Incomplete data is set for '%1'.</translation>
+      <source>FOUND_POLYGONS</source>
+      <translation>Found polygons:</translation>
     </message>
     <message>
-      <source>CONFIRMATION</source>
+      <source>USE_DBF_AS_ST</source>
+      <translation>Use dBase attributes as a Strickler Types</translation>
+    </message>
+    <message>
+      <source>AV_ATTRS</source>
+      <translation>Available attributes</translation>
+    </message>
+    <message>
+      <source>CORR</source>
+      <translation>Correspondence</translation>
+    </message>
+
+    <message>
+      <source>TABLE_H1</source>
+      <translation>Attribute</translation>
+    </message>
+    <message>
+      <source>TABLE_H2</source>
+      <translation>Strickler Type</translation>
+    </message>
+    <message>
+      <source>TABLE_H3</source>
+      <translation>Color</translation>
+    </message>
+
+    <message>
+      <source>LCM_IMPORT_WARNING</source>
+      <translation>Import of Land cover map</translation>
+    </message>
+    <message>
+      <source>DBF_LOAD_ERROR</source>
+      <translation>Cannot load DBF file</translation>
+    </message>
+    <message>
+      <source>FILE_ISNT_CHOSEN</source>
+      <translation>File isn't chosen</translation>
+    </message>
+    <message>
+      <source>POLYGONS_ISNT_SELECTED</source>
+      <translation>Polygons isn't selected</translation>
+    </message>
+    <message>
+      <source>DBF_LOAD_ERR_MESS</source>
+      <translation>Cant open DBF file or it's corrupted</translation>
+    </message>
+
+  </context>
+
+  <context>
+    <name>HYDROGUI_ImportLandCoverMapOp</name>
+    <message>
+      <source>IMPORT_LANDCOVER_MAP</source>
+      <translation>Import land cover map</translation>
+    </message>
+    <message>
+      <source>DEFAULT_LANDCOVER_MAP_NAME</source>
+      <translation>Landcovermap_0</translation>
+    </message>
+    <message>
+      <source>DEF_POLYGON_NAME</source>
+      <translation>polygon</translation>
+    </message>
+
+    <message>
+      <source>CANNT_IMPORT_LCM</source>
+      <translation>Cannot import land cover map;</translation>
+    </message>
+    <message>
+      <source>CANNT_OPEN_SHP</source>
+      <translation>Cannot open SHP file</translation>
+    </message>
+    <message>
+      <source>CANNT_OPEN_SHX</source>
+      <translation>Cannot open SHX file</translation>
+    </message>
+    <message>
+      <source>SHP_TYPEFORMAT_MESS</source>
+      <translation>The shape type of file is </translation>
+    </message>
+    <message>
+      <source>CANNT_IMPORT_POLYGONS_FROM_SHP</source>
+      <translation>Cant import choosed polygons</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ExportLandCoverMapDlg</name>
+    <message>
+      <source>EXPORT_LANDCOVERMAP</source>
+      <translation>Export land cover map to SHP file</translation>
+    </message>
+    <message>
+      <source>WRITE_ST_AS_ATTRS_TO_DBF</source>
+      <translation>Write Strickler Types as attributes values to DBF file</translation>
+    </message>
+    <message>
+      <source>LCM_DISCR_LABEL</source>
+      <translation>Current Land Cover Map contains at least one non-linear border. It will be exported in the discretization mode</translation>
+    </message>
+    <message>
+      <source>LCM_DEFL_LABEL</source>
+      <translation>Enter a deflection value:</translation>
+    </message>
+
+  </context>
+
+ 
+  <context>
+    <name>HYDROGUI_ImportSinusXOp</name>
+    <message>
+      <source>IMPORT_SINUSX</source>
+      <translation>Import from SinusX</translation>
+    </message>
+    <message>
+      <source>SINUSX_FILTER</source>
+      <translation>SinusX Files (*.sx)</translation>
+    </message>
+    <message>
+      <source>NO_ONE_ENTITY_IMPORTED</source>
+      <translation>Entities cant be read</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ExportSinusXOp</name>
+    <message>
+      <source>EXPORT_SINUSX</source>
+      <translation>Export to SinusX</translation>
+    </message>
+    <message>
+      <source>SINUSX_FILTER</source>
+      <translation>SinusX Files (*.sx)</translation>
+    </message>
+    <message>
+      <source>NO_ENTITIES_TO_EXPORT</source>
+      <translation>No entities to export</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ExportSinusXDlg</name>
+    <message>
+      <source>OBJECTS_TO_EXPORT</source>
+      <translation>Objects:</translation>
+    </message>
+    <message>
+      <source>EXPORT</source>
+      <translation>Export</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ExportFileOp</name>
+    <message>
+      <source>EXPORT_TO_SHAPE_FILE</source>
+      <translation>Export</translation>
+    </message>
+    <message>
+      <source>SHP_FILTER</source>
+      <translation>Shape Files (*.shp)</translation>
+    </message>
+    <message>
+      <source>CANNOT_BE_EXPORTED</source>
+      <translation>Following entities cannot be exported:</translation>
+    </message>
+    <message>
+      <source>ERROR_POLYLINES_OF_DIFF_KIND</source>
+      <translation>Cannot export polylines of different kind</translation>
+    </message>
+  </context>
+  
+  <context>
+    <name>HYDROGUI_GeoreferencementDlg</name>
+    <message>
+      <source>PROFILES</source>
+      <translation>Profiles</translation>
+    </message>
+    <message>
+      <source>ALL_MODE</source>
+      <translation>All</translation>
+    </message>
+    <message>
+      <source>SELECTED_MODE</source>
+      <translation>Selected</translation>
+    </message>
+    <message>
+      <source>UPDATE_SELECTION</source>
+      <translation>Update selection</translation>
+    </message>
+    <message>
+      <source>PROFILE_HEADER</source>
+      <translation>Profile</translation>
+    </message>
+    <message>
+      <source>XG_HEADER</source>
+      <translation>Xg</translation>
+    </message>
+    <message>
+      <source>YG_HEADER</source>
+      <translation>Yg</translation>
+    </message>
+    <message>
+      <source>XD_HEADER</source>
+      <translation>Xd</translation>
+    </message>
+    <message>
+      <source>YD_HEADER</source>
+      <translation>Yd</translation>
+    </message>
+  </context>
+ 
+  <context>
+    <name>HYDROGUI_GeoreferencementOp</name>
+    <message>
+      <source>PROFILES_GEOREFERENCEMENT</source>
+      <translation>Profiles georeferencement</translation>
+    </message>
+    <message>
+      <source>INCOMPLETE_DATA</source>
+      <translation>Incomplete data is set for '%1'.</translation>
+    </message>
+    <message>
+      <source>CONFIRMATION</source>
       <translation>Confirmation</translation>
     </message>
     <message>
@@ -1960,6 +2601,34 @@ file cannot be correctly imported for an Obstacle definition.</translation>
     </message>
   </context>
 
+  <context>
+    <name>HYDROGUI_SetTransparencyOp</name>
+    <message>
+      <source>SET_TRANSPARENCY</source>
+      <translation>Set transparency</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_TransparencyDlg</name>
+    <message>
+      <source>TRANSPARENCY</source>
+      <translation>Transparency</translation>
+    </message>
+    <message>
+      <source>APPLY_AND_CLOSE</source>
+      <translation>Apply and Close</translation>
+    </message>
+    <message>
+      <source>APPLY</source>
+      <translation>Apply</translation>
+    </message>
+    <message>
+      <source>CLOSE</source>
+      <translation>Close</translation>
+    </message>
+  </context>
+
   <context>
     <name>HYDROGUI_StreamDlg</name>
     <message>
@@ -2027,7 +2696,7 @@ file cannot be correctly imported for an Obstacle definition.</translation>
     </message>
     <message>
       <source>AXIS_NOT_DEFINED</source>
-      <translation>Hydraulic axis is not defiled.</translation>
+      <translation>Hydraulic axis is not defined.</translation>
     </message>
     <message>
       <source>PROFILES_NOT_DEFINED</source>
@@ -2093,8 +2762,15 @@ Polyline should consist from one not closed curve.</translation>
       <source>DEFAULT_CHANNEL_NAME</source>
       <translation>Channel</translation>
     </message>
+    <message>
+      <source>GUIDE_LINE_IS_NOT_SELECTED</source>
+      <translation>Guide line is not chosen</translation>
+    </message>
+    <message>
+      <source>PROFILE_IS_NOT_SELECTED</source>
+      <translation>Profile is not chosen</translation>
+    </message>
   </context>
-
   <context>
     <name>HYDROGUI_DigueDlg</name>
     <message>
@@ -2119,6 +2795,194 @@ Polyline should consist from one not closed curve.</translation>
     </message>
   </context>
 
+  <context>
+    <name>HYDROGUI_StricklerTableDlg</name>
+    <message>
+      <source>IMPORT_STRICKLER_TABLE_FILE</source>
+      <translation>Import Strickler table file</translation>
+    </message>
+    <message>
+      <source>EXPORT_STRICKLER_TABLE_FILE</source>
+      <translation>Export Strickler table file</translation>
+    </message>
+    <message>
+      <source>FILE_NAME</source>
+      <translation>File name</translation>
+    </message>
+    <message>
+      <source>STRICKLER_TABLE_NAME</source>
+      <translation>Strickler table name</translation>
+    </message>
+    <message>
+      <source>NAME</source>
+      <translation>Name</translation>
+    </message>
+    <message>
+      <source>DEFAULT_STRICKLER_TABLE_NAME</source>
+      <translation>Strickler table</translation>
+    </message>
+    <message>
+      <source>STRICKLER_TABLE_TABLE</source>
+      <translation>Strickler table definition</translation>
+    </message>
+    <message>
+      <source>ADD</source>
+      <translation>Add</translation>
+    </message>
+    <message>
+      <source>REMOVE</source>
+      <translation>Remove</translation>
+    </message>
+    <message>
+      <source>CLEAR_ALL</source>
+      <translation>Clear all</translation>
+    </message>
+    <message>
+      <source>STRICKLER_TYPE</source>
+      <translation>Type</translation>
+    </message>
+    <message>
+      <source>STRICKLER_COEFFICIENT</source>
+      <translation>Coefficient</translation>
+    </message>
+    <message>
+      <source>STRICKLER_TABLE_ATTR_NAME</source>
+      <translation>QGIS attribute name</translation>
+    </message>
+    <message>
+      <source>ATTR_NAME</source>
+      <translation>Attribute name</translation>
+    </message>
+    <message>
+      <source>ATTR_VALUE</source>
+      <translation>Attr.value</translation>
+    </message>
+    <message>
+      <source>COLOR</source>
+      <translation>Color</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_StricklerTableOp</name>
+    <message>
+      <source>IMPORT_STRICKLER_TABLE</source>
+      <translation>Import Strickler table</translation>
+    </message>
+    <message>
+      <source>EXPORT_STRICKLER_TABLE</source>
+      <translation>Export Strickler table</translation>
+    </message>
+    <message>
+      <source>EDIT_STRICKLER_TABLE</source>
+      <translation>Edit Strickler table</translation>
+    </message>
+    <message>
+      <source>SELECT_STRICKLER_TABLE_FILE</source>
+      <translation>The Strickler table file is not chosen</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_LandCoverMapDlg</name>
+    <message>
+      <source>DEFAULT_LAND_COVER_MAP_NAME</source>
+      <translation>Land cover map</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_MAP_NAME</source>
+      <translation>Land cover map name</translation>
+    </message>
+    <message>
+      <source>NAME</source>
+      <translation>Name</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_MAP_PARAMETERS</source>
+      <translation>Parameters</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_MAP_POLYLINE_FACE</source>
+      <translation>Polyline / Face</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_MAP_STRICKLER_TYPE</source>
+      <translation>Strickler type</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_MAP_SELECTED_FACES</source>
+      <translation>
+        
+  This operation is performed on a set of land covers selected in the 3D Viewer.
+        
+  Number of selected land covers: </translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_LandCoverMapOp</name>
+    <message>
+      <source>CREATE_LAND_COVER_MAP</source>
+      <translation>Create land cover map</translation>
+    </message>
+    <message>
+      <source>ADD_LAND_COVER</source>
+      <translation>Add land cover to the land cover map</translation>
+    </message>
+    <message>
+      <source>REMOVE_LAND_COVER</source>
+      <translation>Remove land cover from the land cover map</translation>
+    </message>
+    <message>
+      <source>SPLIT_LAND_COVER</source>
+      <translation>Split land cover(s) inside the land cover map</translation>
+    </message>
+    <message>
+      <source>MERGE_LAND_COVER</source>
+      <translation>Merge land covers inside the land cover map</translation>
+    </message>
+    <message>
+      <source>CHANGE_LAND_COVER_TYPE</source>
+      <translation>Change Strickler type(s) assigned to the land cover(s) inside the land cover map</translation>
+    </message>
+    <message>
+      <source>POLYLINE_FACE_NOT_DEFINED</source>
+      <translation>Polyline / Face object should be defined.</translation>
+    </message>
+    <message>
+      <source>STRICKLER_TYPE_NOT_DEFINED</source>
+      <translation>Strickler type should be defined.</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_MAP_UNDEFINED</source>
+      <translation>Land cover map is undefined.</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_NOT_ADDED</source>
+      <translation>Land cover can not be added.</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_NOT_REMOVED</source>
+      <translation>Land cover can not be removed.</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_NOT_SPLIT</source>
+      <translation>Land cover can not be split.</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_NOT_MERGED</source>
+      <translation>Land cover can not be merged.</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_TYPE_NOT_CHANGED</source>
+      <translation>Strickler type can not be changed for all selected land covers.</translation>
+    </message>
+    <message>
+      <source>LAND_COVER_OBJECT_CANNOT_BE_CREATED</source>
+      <translation>Land Cover object can not be created</translation>
+    </message>
+  </context>
+
   <context>
     <name>HYDROGUI_TranslateObstacleDlg</name>
     <message>
@@ -2186,6 +3050,10 @@ Polyline should consist from one not closed curve.</translation>
         <source>ALL_OBJECTS_CHECKED_TLT</source>
         <translation>Exclude hidden objects from the list</translation>
     </message>
+    <message>
+      <source>APPLY_AND_CLOSE</source>
+      <translation>Apply and Close</translation>
+    </message>
     <message>
         <source>APPLY</source>
         <translation>Apply</translation>
@@ -2343,5 +3211,136 @@ Polyline should consist from one not closed curve.</translation>
       <translation>Can't obtain stream oject \"%1\"</translation>
     </message>
   </context>
+  
+  <context>
+    <name>HYDROGUI_RecognizeContoursDlg</name>
+    <message>
+      <source>NAME</source>
+      <translation>Name</translation>
+    </message>
+    <message>
+      <source>ORIGINAL_IMAGE</source>
+      <translation>Original image</translation>
+    </message>
+    <message>
+      <source>RECOGNIZED_POLYLINES</source>
+      <translation>Polylines</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_RecognizeContoursOp</name>
+    <message>
+      <source>CONTOURS_RECOGNITION</source>
+      <translation>Contours recognition</translation>
+    </message>
+    <message>
+      <source>NO_DETECTED_CONTOURS</source>
+      <translation>No contours were detected.</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_SplitPolylinesOp</name>
+    <message>
+      <source>SPLIT_POLYLINES</source>
+      <translation>Split polylines</translation>
+    </message>
+    <message>
+      <source>SPLIT_POLYLINE_BY_TOOL_WARNING_TITLE</source>
+      <translation>Split polyline by tool</translation>
+    </message>
+    <message>
+      <source>SPLIT_POLYLINE_BY_TOOL_WARNING_MSG</source>
+      <translation>The split polyline is not intersected by the tool.</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_SplitPolylinesDlg</name>
+    <message>
+      <source>POLYLINES</source>
+      <translation>Polylines</translation>
+    </message>
+    <message>
+      <source>POINT</source>
+      <translation>Point</translation>
+    </message>
+    <message>
+      <source>POLYLINE</source>
+      <translation>Polyline</translation>
+    </message>
+    <message>
+      <source>TOOL_POLYLINE</source>
+      <translation>Tool polyline</translation>
+    </message>
+    <message>
+      <source>SPLIT_POLYLINES</source>
+      <translation>Split polylines</translation>
+    </message>
+    <message>
+      <source>BY_POINT</source>
+      <translation>By point</translation>
+    </message>
+    <message>
+      <source>BY_TOOL</source>
+      <translation>By tool</translation>
+    </message>
+    <message>
+      <source>COMPLETE_SPLIT</source>
+      <translation>Complete split</translation>
+    </message>
+    <message>
+      <source>RESULT_NAME</source>
+      <translation>Result name prefix:</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_MergePolylinesDlg</name>
+    <message>
+      <source>POLYLINES</source>
+      <translation>Polylines</translation>
+    </message>
+    <message>
+      <source>MERGE_POLYLINES</source>
+      <translation>Merge polylines</translation>
+    </message>
+    <message>
+      <source>RESULT_NAME</source>
+      <translation>Result name:</translation>
+    </message>
+    <message>
+      <source>IS_CONNECT</source>
+      <translation>Connect by a new segment</translation>
+    </message>
+  </context>
+  <context>
+    <name>HYDROGUI_MergePolylinesOp</name>
+    <message>
+      <source>MERGE_POLYLINES</source>
+      <translation>Merge polylines</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ObjListBox</name>
+    <message>
+      <source>INCLUDE</source>
+      <translation>Include</translation>
+    </message>
+    <message>
+      <source>EXCLUDE</source>
+      <translation>Exclude</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_PolylineExtractionOp</name>
+    <message>
+      <source>POLYLINE_EXTRACTION</source>
+      <translation>Polyline extraction</translation>
+    </message>
+  </context>
 
 </TS>