refs #453: scalar bar is invisible

[modules/hydro.git] / src / HYDROGUI / resources / HYDROGUI_msg_en.ts

diff --git a/src/HYDROGUI/resources/HYDROGUI_msg_en.ts b/src/HYDROGUI/resources/HYDROGUI_msg_en.ts
index bb8bf240fd962cb868ff2fa7259105592cee7a09..02b897a14c66dcfa53315985a23f34822cf0d57c 100644 (file)
--- a/src/HYDROGUI/resources/HYDROGUI_msg_en.ts
+++ b/src/HYDROGUI/resources/HYDROGUI_msg_en.ts
@@ -1,19 +1,111 @@
-<!DOCTYPE TS>
+<!DOCTYPE TS> 
 <TS version="1.1" >
   
   <context>
     <name>@default</name>
+    <message>
+      <source>RENAME_TO</source>
+      <translation>Rename to %1</translation>
+    </message>
+    <message>
+      <source>DEFAULT_IMAGE_NAME</source>
+      <translation>Image</translation>
+    </message>
+    <message>
+      <source>DEFAULT_POLYLINE_NAME</source>
+      <translation>Polyline</translation>
+    </message>
+    <message>
+      <source>DEFAULT_OBSTACLE_NAME</source>
+      <translation>Obstacle</translation>
+    </message>
+    <message>
+      <source>DEFAULT_POLYLINE_3D_NAME</source>
+      <translation>Polyline3D</translation>
+    </message>
+    <message>
+      <source>DEFAULT_PROFILE_NAME</source>
+      <translation>Profile</translation>
+    </message>
+    <message>
+      <source>DEFAULT_VISUAL_STATE_NAME</source>
+      <translation>Visual state</translation>
+    </message>
+    <message>
+      <source>DEFAULT_BATHYMETRY_NAME</source>
+      <translation>Bathymetry</translation>
+    </message>
+    <message>
+      <source>DEFAULT_CALCULATION_CASE_NAME</source>
+      <translation>Case</translation>
+    </message>
+    <message>
+      <source>DEFAULT_IMMERSIBLE_ZONE_NAME</source>
+      <translation>Immersible zone</translation>
+    </message>
+    <message>
+      <source>IMAGES</source>
+      <translation>IMAGES</translation>
+    </message>
+    <message>
+      <source>POLYLINES</source>
+      <translation>POLYLINES</translation>
+    </message>
+    <message>
+      <source>POLYLINES_3D</source>
+      <translation>POLYLINES 3D</translation>
+    </message>
+    <message>
+      <source>PROFILES</source>
+      <translation>PROFILES</translation>
+    </message>
+    <message>
+      <source>VISUAL_STATES</source>
+      <translation>VISUAL STATES</translation>
+    </message>
+    <message>
+      <source>BATHYMETRIES</source>
+      <translation>BATHYMETRIES</translation>
+    </message>
+    <message>
+      <source>CALCULATION_CASES</source>
+      <translation>CALCULATION CASES</translation>
+    </message>
+    <message>
+      <source>OBSTACLES</source>
+      <translation>OBSTACLES</translation>
+    </message>
+    <message>
+      <source>ARTIFICIAL_OBJECTS</source>
+      <translation>ARTIFICIAL OBJECTS</translation>
+    </message>
+    <message>
+      <source>NATURAL_OBJECTS</source>
+      <translation>NATURAL OBJECTS</translation>
+    </message>
     <message>
       <source>BATHYMETRY_FILTER</source>
       <translation>Bathymetry files (*.xyz);;All files (*.* *)</translation>
     </message>
+    <message>
+      <source>CASE_BOUNDARY</source>
+      <translation>Boundary</translation>
+    </message>
     <message>
       <source>CASE_REFERENCE_ZONES</source>
       <translation>Reference zones</translation>
     </message>
     <message>
       <source>CASE_REGIONS</source>
-      <translation>Regions</translation>
+      <translation>REGIONS</translation>
+    </message>
+    <message>
+      <source>CASE_SPLITTED_GROUPS</source>
+      <translation>Split groups</translation>
+    </message>
+    <message>
+      <source>FILE_CAN_NOT_BE_IMPORTED</source>
+      <translation>The file '%1' can not be imported: format *.%2 is not supported.</translation>
     </message>
     <message>
       <source>FILE_NOT_EXISTS_OR_CANT_BE_READ</source>
@@ -22,7 +114,7 @@ does not exist or you have not enough permissions to open it.</translation>
     </message>
     <message>
       <source>IMAGE_FILTER</source>
-      <translation>Image files (*.bmp *.jpg *.jpeg *.png);;All files (*.* *)</translation>
+      <translation>Image files (*.bmp *.jpg *.jpeg *.png *.tif);;All files (*.* *)</translation>
     </message>
     <message>
       <source>INCORRECT_OBJECT_NAME</source>
@@ -44,6 +136,22 @@ does not exist or you have not enough permissions to open it.</translation>
       <source>LOAD_ERROR</source>
       <translation>Study could not be loaded</translation>
     </message>
+    <message>
+      <source>SHAPE_IMAGE_ERROR</source>
+      <translation>Image shape could not be created</translation>
+    </message>
+    <message>
+      <source>IMAGE_CAN_NOT_BE_CREATED</source>
+      <translation>It is not possible to create a presentation for OCC 3D view. </translation>
+    </message>
+    <message>
+      <source>IMAGE_TRANSFORMATION_CAN_NOT_BE_APPLYED</source>
+      <translation>The transformated image is out of range.</translation>
+    </message>
+    <message>
+      <source>FILE_CAN_NOT_BE_CREATED</source>
+      <translation>The temporary file '%1' can not be created.</translation>
+    </message>
     <message>
       <source>OBJECT_EXISTS_IN_DOCUMENT</source>
       <translation>Object with name '%1' already exists in the document.</translation>
@@ -60,6 +168,10 @@ does not exist or you have not enough permissions to open it.</translation>
       <source>ZONE_BATHYMETRY</source>
       <translation>Bathymetry</translation>
     </message>
+    <message>
+      <source>OBJECT_GROUPS</source>
+      <translation>Groups</translation>
+    </message>
     <message>
       <source>MERGE_UNKNOWN</source>
       <translation>Unresolved Conflict</translation>
@@ -76,6 +188,43 @@ does not exist or you have not enough permissions to open it.</translation>
       <source>NEW_REGION</source>
       <translation>&lt;New region&gt;</translation>
     </message>
+    <message>
+      <source>OBSTACLE_FILTER</source>
+      <translation>BREP files (*.brep);;IGES files (*.iges *.igs);;STEP files (*.step *.stp);;
+All supported formats (*.brep *.iges *.igs *.step *.stp)</translation>
+    </message>
+    <message>
+      <source>COORDINATES_INFO</source>
+      <translation>Local CS: (%1, %2); Global CS: (%3, %4)</translation>
+    </message>
+    <message>
+      <source>POLYLINE3D_POLYLINE</source>
+      <translation>Polyline</translation>
+    </message>
+    <message>
+      <source>POLYLINE3D_PROFILE</source>
+      <translation>Profile</translation>
+    </message>
+    <message>
+      <source>POLYLINE3D_BATHYMETRY</source>
+      <translation>Bathymetry</translation>
+    </message>
+    <message>
+      <source>CHANNEL_GUIDE_LINE</source>
+      <translation>Guide line</translation>
+    </message>
+    <message>
+      <source>CHANNEL_PROFILE</source>
+      <translation>Profile</translation>
+    </message>
+    <message>
+      <source>STREAM_HYDRAULIC_AXIS</source>
+      <translation>Hydraulic axis</translation>
+    </message>
+    <message>
+      <source>STREAM_PROFILES</source>
+      <translation>Profiles</translation>
+    </message>
   </context>
 
   <context>
@@ -92,6 +241,14 @@ does not exist or you have not enough permissions to open it.</translation>
       <source>INCLUDED_OBJECTS</source>
       <translation>Included objects</translation>
     </message>
+    <message>
+      <source>AVAILABLE_GROUPS</source>
+      <translation>Available groups</translation>
+    </message>
+    <message>
+      <source>INCLUDED_GROUPS</source>
+      <translation>Included groups</translation>
+    </message>
     <message>
       <source>LIMITS</source>
       <translation>Limits</translation>
@@ -112,6 +269,18 @@ does not exist or you have not enough permissions to open it.</translation>
       <source>EXCLUDE</source>
       <translation>Exclude &lt;&lt;</translation>
     </message>
+    <message>
+      <source>ADD</source>
+      <translation>Add</translation>
+    </message>
+    <message>
+      <source>REMOVE</source>
+      <translation>Remove</translation>
+    </message>
+    <message>
+      <source>EMPTY_GEOMETRY_OBJECTS</source>
+      <translation>No one geometry object is selected, should be at least one.</translation>
+    </message>
   </context>
 
   <context>
@@ -128,6 +297,14 @@ does not exist or you have not enough permissions to open it.</translation>
       <source>PREVIEW_CASE_ZONES</source>
       <translation>Preview case zones</translation>
     </message>
+    <message>
+      <source>REGIONS_CHANGED</source>
+      <translation>Regions list modification</translation>
+    </message>
+    <message>
+      <source>CONFIRM_SPLITTING_ZONES_RECALCULATION</source>
+      <translation>Case splitting zones already exist and will be recalculated after regions list modification. Do you confirm the recalculation?</translation>
+    </message>
   </context>
 
   <context>
@@ -137,8 +314,8 @@ does not exist or you have not enough permissions to open it.</translation>
       <translation>Ref.Object</translation>
     </message>
     <message>
-      <source>BATHYMETRY_COLUMN</source>
-      <translation>Bathymetry</translation>
+      <source>ALTITUDE_COLUMN</source>
+      <translation>Altitude.Object</translation>
     </message>
   </context>
 
@@ -150,6 +327,14 @@ does not exist or you have not enough permissions to open it.</translation>
     </message>
   </context>
 
+  <context>
+    <name>HYDROGUI_CopyPastePositionOp</name>
+    <message>
+      <source>COPY_PASTE_VIEW_POSITION</source>
+      <translation>Copy/paste view position</translation>
+    </message>
+  </context>
+
   <context>
     <name>HYDROGUI_DeleteOp</name>
     <message>
@@ -160,14 +345,39 @@ does not exist or you have not enough permissions to open it.</translation>
       <source>DELETE_OBJECTS</source>
       <translation>Delete objects</translation>
     </message>
+    <message>
+      <source>DELETE_OBJECTS_IMPOSIBLE</source>
+      <translation>One or more selected objects can not be deleted separately from parent object.</translation>
+    </message>
+    <message>
+      <source>DELETED_OBJECTS_HAS_BACKREFERENCES</source>
+      <translation>One or more selected objects are used to create another ones.
+First remove objects which are created on their basis.
+
+%1</translation>
+    </message>
+    <message>
+      <source>DELETE_OBJECT_NAME</source>
+      <translation>"%1"</translation>
+    </message>
+    <message>
+      <source>DELETE_OBJECT_IS_USED_FOR</source>
+      <translation>Object "%1" is used for %2</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_DeleteDlg</name>
+    <message>
+      <source>DELETE_OBJECTS</source>
+      <translation>Delete objects</translation>
+    </message>
     <message>
       <source>CONFIRM_DELETION</source>
-      <translation>The following objects (including the dependencies) will be deleted:
-%1
-Do you want to continue?</translation>
+      <translation>Do you really want to delete %1 object(s)?</translation>
     </message>
   </context>
-  
+
   <context>
     <name>HYDROGUI_ExportImageOp</name>
     <message>
@@ -230,10 +440,18 @@ Do you want to continue?</translation>
       <source>NAME</source>
       <translation>Name</translation>
     </message>
+    <message>
+      <source>INVERT_BATHYMETRY_ALTITUDES</source>
+      <translation>Invert altitude values</translation>
+    </message>
   </context>
   
   <context>
     <name>HYDROGUI_ImportBathymetryOp</name>
+    <message>
+      <source>EDIT_IMPORTED_BATHYMETRY</source>
+      <translation>Edit imported bathymetry</translation>
+    </message>
     <message>
       <source>IMPORT_BATHYMETRY</source>
       <translation>Import bathymetry</translation>
@@ -283,6 +501,10 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>MANUALLY_LAMBERT93</source>
       <translation>Manually input Plane coordinates (Lambert93)</translation>
     </message>
+    <message>
+      <source>LAMBERT93_FROM_FILE</source>
+      <translation>Get Plane coordinates (Lambert93) from file</translation>
+    </message>
     <message>
       <source>IMAGE_CS</source>
       <translation>Image CS</translation>
@@ -295,6 +517,14 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>LAMBERT93</source>
       <translation>Plane coordinates (Lambert93)</translation>
     </message>
+    <message>
+      <source>POINT_LATITUDE</source>
+      <translation>Lat</translation>
+    </message>
+    <message>
+      <source>POINT_LONGITUDE</source>
+      <translation>Long</translation>
+    </message>
     <message>
       <source>REFERENCE_IMAGE_CS</source>
       <translation>Reference Image CS</translation>
@@ -307,6 +537,14 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>TRANSFORM_IMAGE</source>
       <translation>Transform image</translation>
     </message>
+    <message>
+      <source>IMPORT_GEO_DATA_FROM_FILE</source>
+      <translation>Import georeferencement data from file</translation>
+    </message>
+    <message>
+      <source>IMAGE_GEOREFERENCEMENT_FILTER</source>
+      <translation>Image georeferencement files (*.grf);;All files (*.* *)</translation>
+    </message>
   </context>
   
   <context>
@@ -355,6 +593,19 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>TRANSFORMATION_MATRIX_CANNOT_BE_COMPUTED</source>
       <translation>Transformation matrix cannot be computed.</translation>
     </message>
+    <message>
+      <source>CORRECT_INPUT_DATA</source>
+      <translation>Correct input data</translation>
+    </message>
+    <message>
+      <source>CONFIRM_REMOVE_REFERENCE_FROM_IMAGE</source>
+      <translation>The image "%1" has a reference to the current object.
+Would you like to remove all references from the image?</translation>
+    </message>
+    <message>
+      <source>CANT_LOAD_GEOREFERENCEMENT_FILE</source>
+      <translation>Can't load data from the image georeferencement file.</translation>
+    </message>
   </context>
   
   <context>
@@ -367,6 +618,22 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>DSK_CREATE_POLYLINE</source>
       <translation>Create polyline</translation>
     </message>
+    <message>
+      <source>DSK_CREATE_POLYLINE_3D</source>
+      <translation>Create polyline 3D</translation>
+    </message>
+    <message>
+      <source>DSK_CREATE_PROFILE</source>
+      <translation>Create profile</translation>
+    </message>
+    <message>
+      <source>DSK_IMPORT_PROFILES</source>
+      <translation>Import profiles from file(s)</translation>
+    </message>
+    <message>
+      <source>DSK_GEOREFERENCEMENT</source>
+      <translation>Profile(s) georeferencement</translation>
+    </message>
     <message>
       <source>DSK_CREATE_IMMERSIBLE_ZONE</source>
       <translation>Create immersible zone</translation>
@@ -375,6 +642,30 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>DSK_EDIT_IMMERSIBLE_ZONE</source>
       <translation>Edit immersible zone</translation> 
     </message>
+    <message>
+      <source>DSK_CREATE_STREAM</source>
+      <translation>Create stream</translation>
+    </message>
+    <message>
+      <source>DSK_EDIT_STREAM</source>
+      <translation>Edit stream</translation>
+    </message>
+    <message>
+      <source>DSK_CREATE_CHANNEL</source>
+      <translation>Create channel</translation>
+    </message>
+    <message>
+      <source>DSK_EDIT_CHANNEL</source>
+      <translation>Edit channel</translation>
+    </message>
+    <message>
+      <source>DSK_CREATE_DIGUE</source>
+      <translation>Create digue</translation>
+    </message>
+    <message>
+      <source>DSK_EDIT_DIGUE</source>
+      <translation>Edit digue</translation>
+    </message>
     <message>
       <source>DSK_COPY</source>
       <translation>Copy</translation>
@@ -391,6 +682,10 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>DSK_EDIT_CALCULATION</source>
       <translation>Edit calculation case</translation>
     </message>
+    <message>
+      <source>DSK_EXPORT_CALCULATION</source>
+      <translation>Export calculation case to GEOM</translation>
+    </message>
     <message>
       <source>DSK_EDIT_CUT_IMAGE</source>
       <translation>Edit cut image</translation>
@@ -407,9 +702,17 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>DSK_EDIT_POLYLINE</source>
       <translation>Edit polyline</translation>
     </message>
+    <message>
+      <source>DSK_EDIT_POLYLINE_3D</source>
+      <translation>Edit polyline 3D</translation>
+    </message>
     <message>
       <source>DSK_EDIT_SPLITTED_IMAGE</source>
-      <translation>Edit splitted image</translation>
+      <translation>Edit split image</translation>
+    </message>
+    <message>
+      <source>DSK_COPY_VIEWER_POSITION</source>
+      <translation>Copy position</translation>
     </message>
     <message>
       <source>DSK_EXPORT_IMAGE</source>
@@ -431,6 +734,14 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>DSK_IMPORT_BATHYMETRY</source>
       <translation>Import bathymetry</translation>
     </message>
+    <message>
+      <source>DSK_EDIT_IMPORTED_BATHYMETRY</source>
+      <translation>Edit imported bathymetry</translation>
+    </message>
+    <message>
+      <source>DSK_BATHYMETRY_BOUNDS</source>
+      <translation>Create boundary polyline</translation>
+    </message>
     <message>
       <source>DSK_IMPORT_IMAGE</source>
       <translation>Import image</translation>
@@ -480,17 +791,73 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <translation>Undo</translation>
     </message>
     <message>
-      <source>DSK_UPDATE_IMAGE</source>
-      <translation>Update image</translation>
+      <source>DSK_UPDATE_OBJECT</source>
+      <translation>Update</translation>
+    </message>
+    <message>
+      <source>DSK_FORCED_UPDATE_OBJECT</source>
+      <translation>Forced update</translation>
+    </message>
+    <message>
+      <source>DSK_IMPORT_OBSTACLE_FROM_FILE</source>
+      <translation>Import obstacle from file</translation>
+    </message>
+    <message>
+      <source>DSK_CREATE_BOX</source>
+      <translation>Create box obstacle</translation>
+    </message>
+    <message>
+      <source>DSK_IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
+      <translation>Import GEOM object(s) as obstacle(s)</translation>
+    </message>
+    <message>
+      <source>DSK_IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
+      <translation>Import GEOM object(s) as polyline(s)</translation>
+    </message>
+    <message>
+      <source>DSK_CREATE_CYLINDER</source>
+      <translation>Create cylinder obstacle</translation>
+    </message>
+    <message>
+      <source>DSK_TRANSLATE_OBSTACLE</source>
+      <translation>Translate obstacle</translation>
+    </message>
+    <message>
+      <source>DSK_COLOR</source>
+      <translation>Set object color</translation>
+    </message>
+    <message>
+      <source>DSK_ZLEVEL</source>
+      <translation>Change layer order</translation>
+    </message>
+    <message>
+      <source>DSK_EDIT_LOCAL_CS</source>
+      <translation>Change local CS</translation>
     </message>
     <message>
       <source>MEN_CREATE_CALCULATION</source>
-      <translation>Create new calculation case</translation>
+      <translation>Create calculation case</translation>
     </message>
     <message>
       <source>MEN_CREATE_POLYLINE</source>
       <translation>Create polyline</translation>
     </message>
+    <message>
+      <source>MEN_CREATE_POLYLINE_3D</source>
+      <translation>Create polyline 3D</translation>
+    </message>
+    <message>
+      <source>MEN_CREATE_PROFILE</source>
+      <translation>Create profile</translation>
+    </message>
+    <message>
+      <source>MEN_IMPORT_PROFILES</source>
+      <translation>Import profiles</translation>
+    </message>
+    <message>
+      <source>MEN_GEOREFERENCEMENT</source>
+      <translation>Georeferencement</translation>
+    </message>
     <message>
       <source>MEN_CREATE_ZONE</source>
       <translation>Create zone</translation>
@@ -503,6 +870,30 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>MEN_EDIT_IMMERSIBLE_ZONE</source>
       <translation>Edit immersible zone</translation>
     </message>
+    <message>
+      <source>MEN_CREATE_STREAM</source>
+      <translation>Create stream</translation>
+    </message>
+    <message>
+      <source>MEN_EDIT_STREAM</source>
+      <translation>Edit stream</translation>
+    </message>
+    <message>
+      <source>MEN_CREATE_CHANNEL</source>
+      <translation>Create channel</translation>
+    </message>
+    <message>
+      <source>MEN_EDIT_CHANNEL</source>
+      <translation>Edit channel</translation>
+    </message>
+    <message>
+      <source>MEN_CREATE_DIGUE</source>
+      <translation>Create digue</translation>
+    </message>
+    <message>
+      <source>MEN_EDIT_DIGUE</source>
+      <translation>Edit digue</translation>
+    </message>
     <message>
       <source>MEN_CUT_IMAGES</source>
       <translation>Cut images</translation>
@@ -511,14 +902,34 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>MEN_DELETE</source>
       <translation>Delete</translation>
     </message>
+    <message>
+      <source>MEN_DESK_ARTIFICIAL</source>
+      <translation>Artificial objects</translation>
+    </message>
     <message>
       <source>MEN_DESK_HYDRO</source>
       <translation>HYDRO</translation>
     </message>
+    <message>
+      <source>MEN_DESK_NATURAL</source>
+      <translation>Natural objects</translation>
+    </message>
+    <message>
+      <source>MEN_DESK_OBSTACLE</source>
+      <translation>Obstacle</translation>
+    </message>
+    <message>
+      <source>MEN_DESK_PROFILE</source>
+      <translation>Profile</translation>
+    </message>
     <message>
       <source>MEN_EDIT_CALCULATION</source>
       <translation>Edit calculation case</translation>
     </message>
+    <message>
+      <source>MEN_EXPORT_CALCULATION</source>
+      <translation>Export calculation case</translation>
+    </message>
     <message>
       <source>MEN_EDIT_CUT_IMAGE</source>
       <translation>Edit cut image</translation>
@@ -533,11 +944,23 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
     </message>
     <message>
       <source>MEN_EDIT_POLYLINE</source>
-      <translation>Create polyline</translation>
+      <translation>Edit polyline</translation>
+    </message>
+    <message>
+      <source>MEN_EDIT_POLYLINE_3D</source>
+      <translation>Edit polyline 3D</translation>
+    </message>
+    <message>
+      <source>MEN_EDIT_PROFILE</source>
+      <translation>Edit profile</translation>
     </message>
     <message>
       <source>MEN_EDIT_SPLITTED_IMAGE</source>
-      <translation>Edit splitted image</translation>
+      <translation>Edit split image</translation>
+    </message>
+    <message>
+      <source>MEN_COPY_VIEWER_POSITION</source>
+      <translation>Copy position</translation>
     </message>
     <message>
       <source>MEN_EXPORT_IMAGE</source>
@@ -559,6 +982,14 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>MEN_IMPORT_BATHYMETRY</source>
       <translation>Import bathymetry</translation>
     </message>
+    <message>
+      <source>MEN_EDIT_IMPORTED_BATHYMETRY</source>
+      <translation>Edit imported bathymetry</translation>
+    </message>
+    <message>
+      <source>MEN_BATHYMETRY_BOUNDS</source>
+      <translation>Create boundary polyline</translation>
+    </message>
     <message>
       <source>MEN_IMPORT_IMAGE</source>
       <translation>Import image</translation>
@@ -571,6 +1002,10 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>MEN_OBSERVE_IMAGE</source>
       <translation>Observe image</translation>
     </message>
+    <message>
+      <source>MEN_COPY</source>
+      <translation>Copy</translation>
+    </message>
     <message>
       <source>MEN_PASTE</source>
       <translation>Paste</translation>
@@ -608,48 +1043,132 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <translation>Undo</translation>
     </message>
     <message>
-      <source>MEN_UPDATE_IMAGE</source>
-      <translation>Update image</translation>
+      <source>MEN_UPDATE_OBJECT</source>
+      <translation>Update</translation>
     </message>
     <message>
-      <source>STB_CREATE_CALCULATION</source>
-      <translation>Create new calculation case</translation>
+      <source>MEN_FORCED_UPDATE_OBJECT</source>
+      <translation>Forced update</translation>
     </message>
     <message>
-      <source>STB_CREATE_POLYLINE</source>
-      <translation>Create polyline</translation>
+      <source>MEN_IMPORT_OBSTACLE_FROM_FILE</source>
+      <translation>Import obstacle</translation>
     </message>
     <message>
-      <source>STB_CREATE_IMMERSIBLE_ZONE</source>
-      <translation>Create immersible zone</translation>
+      <source>MEN_IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
+      <translation>Import as obstacle</translation>
     </message>
     <message>
-      <source>STB_EDIT_IMMERSIBLE_ZONE</source>
-      <translation>Edit immersible zone</translation>
+      <source>MEN_IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
+      <translation>Import as polyline</translation>
     </message>
     <message>
-      <source>STB_COPY</source>
-      <translation>Copy</translation>
+      <source>MEN_CREATE_BOX</source>
+      <translation>Create box</translation>
     </message>
     <message>
-      <source>STB_CUT_IMAGES</source>
-      <translation>Cut images</translation>
+      <source>MEN_CREATE_CYLINDER</source>
+      <translation>Create cylinder</translation>
     </message>
     <message>
-      <source>STB_DELETE</source>
-      <translation>Delete</translation>
+      <source>MEN_TRANSLATE_OBSTACLE</source>
+      <translation>Translate</translation>
     </message>
     <message>
-      <source>STB_EDIT_CALCULATION</source>
-      <translation>Edit calculation case</translation>
+      <source>MEN_COLOR</source>
+      <translation>Color</translation>
     </message>
     <message>
-      <source>STB_EDIT_CUT_IMAGE</source>
-      <translation>Edit cut image</translation>
+      <source>MEN_ZLEVEL</source>
+      <translation>Change layer order</translation>
     </message>
     <message>
-      <source>STB_EDIT_FUSED_IMAGE</source>
-      <translation>Edit fused image</translation>
+      <source>MEN_EDIT_LOCAL_CS</source>
+      <translation>Change local CS</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_CALCULATION</source>
+      <translation>Create calculation case</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_POLYLINE</source>
+      <translation>Create polyline</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_POLYLINE_3D</source>
+      <translation>Create polyline 3D</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_PROFILE</source>
+      <translation>Create profile</translation>
+    </message>
+    <message>
+      <source>STB_IMPORT_PROFILES</source>
+      <translation>Import profiles from file(s)</translation>
+    </message>
+    <message>
+      <source>STB_GEOREFERENCEMENT</source>
+      <translation>Profile(s) georeferencement</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_IMMERSIBLE_ZONE</source>
+      <translation>Create immersible zone</translation>
+    </message>
+    <message>
+      <source>STB_EDIT_IMMERSIBLE_ZONE</source>
+      <translation>Edit immersible zone</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_STREAM</source>
+      <translation>Create stream</translation>
+    </message>
+    <message>
+      <source>STB_EDIT_STREAM</source>
+      <translation>Edit stream</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_CHANNEL</source>
+      <translation>Create channel</translation>
+    </message>
+    <message>
+      <source>STB_EDIT_CHANNEL</source>
+      <translation>Edit channel</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_DIGUE</source>
+      <translation>Create digue</translation>
+    </message>
+    <message>
+      <source>STB_EDIT_DIGUE</source>
+      <translation>Edit digue</translation>
+    </message>
+    <message>
+      <source>STB_COPY</source>
+      <translation>Copy</translation>
+    </message>
+    <message>
+      <source>STB_CUT_IMAGES</source>
+      <translation>Cut images</translation>
+    </message>
+    <message>
+      <source>STB_DELETE</source>
+      <translation>Delete</translation>
+    </message>
+    <message>
+      <source>STB_EDIT_CALCULATION</source>
+      <translation>Edit calculation case</translation>
+    </message>
+    <message>
+      <source>STB_EXPORT_CALCULATION</source>
+      <translation>Export calculation case to GEOM</translation>
+    </message>
+    <message>
+      <source>STB_EDIT_CUT_IMAGE</source>
+      <translation>Edit cut image</translation>
+    </message>
+    <message>
+      <source>STB_EDIT_FUSED_IMAGE</source>
+      <translation>Edit fused image</translation>
     </message>
     <message>
       <source>STB_EDIT_IMPORTED_IMAGE</source>
@@ -659,9 +1178,17 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>STB_EDIT_POLYLINE</source>
       <translation>Edit polyline</translation>
     </message>
+    <message>
+      <source>STB_EDIT_POLYLINE_3D</source>
+      <translation>Edit polyline 3D</translation>
+    </message>
     <message>
       <source>STB_EDIT_SPLITTED_IMAGE</source>
-      <translation>Edit splitted image</translation>
+      <translation>Edit split image</translation>
+    </message>
+    <message>
+      <source>STB_COPY_VIEWER_POSITION</source>
+      <translation>Copy position</translation>
     </message>
     <message>
       <source>STB_EXPORT_IMAGE</source>
@@ -683,6 +1210,14 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>STB_IMPORT_BATHYMETRY</source>
       <translation>Import bathymetry</translation>
     </message>
+    <message>
+      <source>STB_EDIT_IMPORTED_BATHYMETRY</source>
+      <translation>Edit imported bathymetry</translation>
+    </message>
+    <message>
+      <source>STB_BATHYMETRY_BOUNDS</source>
+      <translation>Create boundary polyline</translation>
+    </message>
     <message>
       <source>STB_IMPORT_IMAGE</source>
       <translation>Import image</translation>
@@ -732,40 +1267,104 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <translation>Undo</translation>
     </message>
     <message>
-      <source>STB_UPDATE_IMAGE</source>
-      <translation>Update image</translation>
+      <source>STB_UPDATE_OBJECT</source>
+      <translation>Update</translation>
+    </message>
+    <message>
+      <source>STB_FORCED_UPDATE_OBJECT</source>
+      <translation>Forced update</translation>
+    </message>
+    <message>
+      <source>STB_IMPORT_OBSTACLE_FROM_FILE</source>
+      <translation>Import obstacle from file</translation>
+    </message>
+    <message>
+      <source>STB_IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
+      <translation>Import GEOM object(s) as obstacle(s)</translation>
+    </message>
+    <message>
+      <source>STB_IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
+      <translation>Import GEOM object(s) as polyline(s)</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_BOX</source>
+      <translation>Create box obstacle</translation>
+    </message>
+    <message>
+      <source>STB_CREATE_CYLINDER</source>
+      <translation>Create cylinder obstacle</translation>
+    </message>
+    <message>
+      <source>STB_TRANSLATE_OBSTACLE</source>
+      <translation>Translate obstacle</translation>
+    </message>
+    <message>
+      <source>STB_COLOR</source>
+      <translation>Set object color</translation>
+    </message>
+    <message>
+      <source>STB_ZLEVEL</source>
+      <translation>Change layer order</translation>
+    </message>
+    <message>
+      <source>STB_EDIT_LOCAL_CS</source>
+      <translation>Change local CS</translation>
     </message>
   </context>
-
+  
   <context>
-    <name>HYDROGUI_ObserveImageOp</name>
+    <name>HYDROGUI_PolylineOp</name>
     <message>
-      <source>OBSERVE_IMAGE</source>
-      <translation>Observe image</translation>
+      <source>CREATE_POLYLINE</source>
+      <translation>Create polyline</translation>
+    </message>
+    <message>
+      <source>EDIT_POLYLINE</source>
+      <translation>Edit polyline</translation>
+    </message>
+    <message>
+      <source>EMPTY_POLYLINE_DATA</source>
+      <translation>No one section is created for polyline, should be at least one.</translation>
+    </message>
+    <message>
+      <source>NUMBER_OF_SECTION_POINTS_INCORRECT</source>
+      <translation>Number of points in each polyline section should not be less than 2.</translation>
+    </message>
+    <message>
+      <source>POLYLINE_IS_UNEDITABLE_TLT</source>
+      <translation>Polyline can not be edited</translation>
+    </message>
+    <message>
+      <source>POLYLINE_IS_UNEDITABLE_MSG</source>
+      <translation>Polyline has an unsupported format and can not be edited.</translation>
     </message>
   </context>
 
   <context>
-    <name>HYDROGUI_PolylineDlg</name>
+    <name>HYDROGUI_Poly3DOp</name>
     <message>
-      <source>ADD_ELEMENT</source>
-      <translation>Add element</translation>
+      <source>CREATE_POLYLINE_3D</source>
+      <translation>Create polyline 3D</translation>
     </message>
     <message>
-      <source>CURVE_NAME_TLT</source>
-      <translation>Name</translation>
+      <source>EDIT_POLYLINE_3D</source>
+      <translation>Edit polyline 3D</translation>
     </message>
   </context>
 
   <context>
-    <name>HYDROGUI_PolylineOp</name>
+    <name>HYDROGUI_ProfileOp</name>
     <message>
-      <source>CREATE_POLYLINE</source>
-      <translation>Create polyline</translation>
+      <source>CREATE_PROFILE</source>
+      <translation>Create profile</translation>
     </message>
     <message>
-      <source>EDIT_POLYLINE</source>
-      <translation>Edit polyline</translation>
+      <source>EDIT_PROFILE</source>
+      <translation>Edit profile</translation>
+    </message>
+    <message>
+      <source>NUMBER_OF_PROFILE_POINTS_INCORRECT</source>
+      <translation>Number of profile points should not be less than 2.</translation>
     </message>
   </context>
 
@@ -801,6 +1400,86 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
     </message>
   </context>
   
+  <context>
+    <name>HYDROGUI_ObserveImageOp</name>
+    <message>
+      <source>OBSERVE_IMAGE</source>
+      <translation>Observe image</translation>
+    </message>
+  </context>
+  
+  <context>
+    <name>HYDROGUI_PolylineDlg</name>
+    <message>
+      <source>ADD_ELEMENT</source>
+      <translation>Add element</translation>
+    </message>
+    <message>
+      <source>EDIT_ELEMENT</source>
+      <translation>Edit element</translation>
+    </message>
+    <message>
+      <source>POLYLINE_NAME_TLT</source>
+      <translation>Name</translation>
+    </message>
+  </context>
+  
+  <context>
+    <name>HYDROGUI_Poly3DDlg</name>
+    <message>
+      <source>POLYLINE_3D_NAME</source>
+      <translation>Polyline 3d name</translation>
+    </message>
+    <message>
+      <source>NAME</source>
+      <translation>Name</translation>
+    </message>
+    <message>
+      <source>PARAMETERS</source>
+      <translation>Parameters</translation>
+    </message>
+    <message>
+      <source>POLYLINE</source>
+      <translation>Polyline</translation>
+    </message>
+    <message>
+      <source>PROFILE</source>
+      <translation>Profile</translation>
+    </message>
+    <message>
+      <source>BATH</source>
+      <translation>Bathymetry</translation>
+    </message>
+  </context>
+  
+  <context>
+    <name>HYDROGUI_ProfileDlg</name>
+    <message>
+      <source>ADD_ELEMENT</source>
+      <translation>Add element</translation>
+    </message>
+    <message>
+      <source>EDIT_ELEMENT</source>
+      <translation>Edit element</translation>
+    </message>
+    <message>
+      <source>PROFILE_NAME_TLT</source>
+      <translation>Name</translation>
+    </message>
+    <message>
+      <source>UZ_COORDINATES_INFO</source>
+      <translation>U: %1, Z: %2</translation>
+    </message>
+    <message>
+      <source>U_TITLE</source>
+      <translation>U</translation>
+    </message>
+    <message>
+      <source>Z_TITLE</source>
+      <translation>Z</translation>
+    </message>
+  </context>
+
   <context>
     <name>HYDROGUI_TwoImagesDlg</name>
     <message>
@@ -869,7 +1548,7 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
     </message>
     <message>
       <source>EDIT_SPLITTED_IMAGE</source>
-      <translation>Edit splitted image</translation>
+      <translation>Edit split image</translation>
     </message>
     <message>
       <source>FUSE</source>
@@ -887,6 +1566,10 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>SPLIT_IMAGE</source>
       <translation>Split image</translation>
     </message>
+    <message>
+      <source>OBJECT_ALREADY_SELECTED</source>
+      <translation>The object "%1" has been already selected. Please select another one to perform the operation.</translation>
+    </message>
   </context>
 
   <context>
@@ -911,26 +1594,10 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
 
   <context>
     <name>HYDROGUI_ImmersibleZoneDlg</name>
-    <message>
-      <source>BORDER_COLOR</source>
-      <translation>Border</translation>
-    </message>
-    <message>
-      <source>COLOR</source>
-      <translation>Color</translation>
-    </message>
-    <message>
-      <source>FILLING_COLOR</source>
-      <translation>Filling color</translation>
-    </message>
     <message>
       <source>NAME</source>
       <translation>Name</translation>
     </message>
-    <message>
-      <source>TRANSPARENT</source>
-      <translation>Transparent</translation>
-    </message>
     <message>
       <source>ZONE_BATHYMETRY</source>
       <translation>Bathymetry</translation>
@@ -959,6 +1626,515 @@ file cannot be correctly imported for a Bathymetry definition.</translation>
       <source>EDIT_IMMERSIBLE_ZONE</source>
       <translation>Edit immersible zone</translation>
     </message>
+    <message>
+      <source>ZONE_OBJECT_CANNOT_BE_CREATED</source>
+      <translation>Zone object can not be created</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_LocalCSOp</name>
+    <message>
+      <source>EDIT_LOCAL_CS</source>
+      <translation>Local CS transformation</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ImportGeomObjectOp</name>
+    <message>
+      <source>IMPORT_GEOM_OBJECT_AS_OBSTACLE</source>
+      <translation>Import GEOM object as obstacle</translation>
+    </message>
+    <message>
+      <source>IMPORT_GEOM_OBJECT_AS_POLYLINE</source>
+      <translation>Import GEOM object as polyline</translation>
+    </message>
+    <message>
+      <source>NO_GEOM_OBJECT_TO_IMPORT</source>
+      <translation>No GEOM object(s) to import.</translation>
+    </message>
+    <message>
+      <source>POLYLINE_IS_UNRECOGNIZED_TLT</source>
+      <translation>Imported curve has an unsupported format</translation>
+    </message>
+    <message>
+      <source>POLYLINE_IS_UNRECOGNIZED_MSG</source>
+      <translation>Imported curve has an unsupported by HYDRO format,
+it will be unavailable for future editing.
+Do you still want to continue?</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ImportObstacleFromFileOp</name>
+    <message>
+      <source>IMPORT_OBSTACLE_FROM_FILE</source>
+      <translation>Import obstacle</translation>
+    </message>
+    <message>
+      <source>BAD_IMPORTED_OBSTACLE_FILE</source>
+      <translation>'%1'
+file cannot be correctly imported for an Obstacle definition.</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ExportCalculationOp</name>
+    <message>
+      <source>EXPORT_CALCULATION</source>
+      <translation>Export calculation case</translation>
+    </message>
+    <message>
+      <source>EXPORT_STATUS</source>
+      <translation>Export status</translation>
+    </message>
+    <message>
+      <source>EXPORT_FINISHED</source>
+      <translation>Export finished successfully.</translation>
+    </message>
+    <message>
+      <source>EXPORT_FAILED</source>
+      <translation>Export of calculation case failed:</translation>
+    </message>
+    <message>
+      <source>EXPORT_DATA_FAILED</source>
+      <translation>parameters of calculation case are invalid.</translation>
+    </message>
+    <message>
+      <source>NULL_DATA_OBJECT</source>
+      <translation>data model object is null pointer.</translation>
+    </message>
+    <message>
+      <source>RESULT_SHAPE_NULL</source>
+      <translation>shape of calculation case regions is empty.</translation>
+    </message>
+    <message>
+      <source>IMPOSSIBLE_TO_CREATE_GEOM_SHAPE</source>
+      <translation>something was wrong during publishing of GEOM shape.</translation>
+    </message>
+    <message>
+      <source>OBJ_PREFIX</source>
+      <translation>HYDRO_</translation>
+    </message>
+  </context>
+  
+  <context>
+    <name>HYDROGUI_GeomObjectDlg</name>
+    <message>
+      <source>GET_SHAPE_FROM_FILE</source>
+      <translation>Get shape from file</translation>
+    </message>
+    <message>
+      <source>IMPORT_OBSTACLE_FROM_FILE</source>
+      <translation>Import obstacle</translation>
+    </message>
+    <message>
+      <source>FILE_NAME</source>
+      <translation>File name</translation>
+    </message>
+    <message>
+      <source>OBJECT_NAME</source>
+      <translation>%1 name</translation>
+    </message>
+    <message>
+      <source>NAME</source>
+      <translation>Name</translation>
+    </message>
+    <message>
+      <source>MODE</source>
+      <translation>Mode</translation>
+    </message>
+    <message>
+      <source>CREATE_NEW</source>
+      <translation>Create new</translation>
+    </message>
+    <message>
+      <source>MODIFY</source>
+      <translation>Modify</translation>
+    </message>
+    <message>
+      <source>OBJECT_TO_EDIT</source>
+      <translation>%1 to edit</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ImportProfilesOp</name>
+    <message>
+      <source>IMPORT_PROFILES</source>
+      <translation>Import profiles</translation>
+    </message>
+    <message>
+      <source>PROFILE_FILTER</source>
+      <translation>All files (*.* *)</translation>
+    </message>
+    <message>
+      <source>BAD_PROFILE_IDS</source>
+      <translation>numbers of bad profiles</translation>
+    </message>
+    <message>
+      <source>BAD_IMPORTED_PROFILES_FILES_TLT</source>
+      <translation>Profiles import error</translation>
+    </message>
+    <message>
+      <source>NO_ONE_PROFILE_IMPORTED</source>
+      <translation>No one profile has been import from selected file(s).</translation>
+    </message>
+    <message>
+      <source>BAD_IMPORTED_PROFILES_FILES</source>
+      <translation>The data from following files cannot be completely imported:
+%1
+</translation>
+    </message>
+  </context>
+   
+  <context>
+    <name>HYDROGUI_GeoreferencementDlg</name>
+    <message>
+      <source>PROFILES</source>
+      <translation>Profiles</translation>
+    </message>
+    <message>
+      <source>ALL_MODE</source>
+      <translation>All</translation>
+    </message>
+    <message>
+      <source>SELECTED_MODE</source>
+      <translation>Selected</translation>
+    </message>
+    <message>
+      <source>UPDATE_SELECTION</source>
+      <translation>Update selection</translation>
+    </message>
+    <message>
+      <source>PROFILE_HEADER</source>
+      <translation>Profile</translation>
+    </message>
+    <message>
+      <source>XG_HEADER</source>
+      <translation>Xg</translation>
+    </message>
+    <message>
+      <source>YG_HEADER</source>
+      <translation>Yg</translation>
+    </message>
+    <message>
+      <source>XD_HEADER</source>
+      <translation>Xd</translation>
+    </message>
+    <message>
+      <source>YD_HEADER</source>
+      <translation>Yd</translation>
+    </message>
+  </context>
+ 
+  <context>
+    <name>HYDROGUI_GeoreferencementOp</name>
+    <message>
+      <source>PROFILES_GEOREFERENCEMENT</source>
+      <translation>Profiles georeferencement</translation>
+    </message>
+    <message>
+      <source>INCOMPLETE_DATA</source>
+      <translation>Incomplete data is set for '%1'.</translation>
+    </message>
+    <message>
+      <source>CONFIRMATION</source>
+      <translation>Confirmation</translation>
+    </message>
+    <message>
+      <source>CONFIRM_STORE</source>
+      <translation>Do you want to store table data in the data model?</translation>
+    </message>
+  </context>
+ 
+  <context>
+    <name>HYDROGUI_SetColorOp</name>
+    <message>
+      <source>SET_COLOR</source>
+      <translation>Set color</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ColorDlg</name>
+    <message>
+      <source>COLOR</source>
+      <translation>Color</translation>
+    </message>
+    <message>
+      <source>FILLING_COLOR</source>
+      <translation>Filling color</translation>
+    </message>
+    <message>
+      <source>OBJECT_COLOR</source>
+      <translation>Object color</translation>
+    </message>
+    <message>
+      <source>TRANSPARENT</source>
+      <translation>Transparent</translation>
+    </message>
+    <message>
+      <source>BORDER_COLOR</source>
+      <translation>Border</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_StreamDlg</name>
+    <message>
+      <source>NAME</source>
+      <translation>Name</translation>
+    </message>
+    <message>
+      <source>STREAM_NAME</source>
+      <translation>Stream name</translation>
+    </message>
+    <message>
+      <source>STREAM_PARAMETERS</source>
+      <translation>Parameters</translation>
+    </message>
+    <message>
+      <source>STREAM_HYDRAULIC_AXIS</source>
+      <translation>Hydraulic axis</translation>
+    </message>
+    <message>
+      <source>ADD</source>
+      <translation>Add</translation>
+    </message>
+    <message>
+      <source>REMOVE</source>
+      <translation>Remove</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_StreamOp</name>
+    <message>
+      <source>CREATE_STREAM</source>
+      <translation>Create stream</translation>
+    </message>
+    <message>
+      <source>EDIT_STREAM</source>
+      <translation>Edit stream</translation>
+    </message>
+    <message>
+      <source>DEFAULT_STREAM_NAME</source>
+      <translation>Stream</translation>
+    </message>
+    <message>
+      <source>WARNING</source>
+      <translation>Warning</translation>
+    </message>
+    <message>
+      <source>IGNORED_PROFILES</source>
+      <translation>The following profile(s) will be ignored:</translation>
+    </message>
+    <message>
+      <source>INVALID_PROFILES</source>
+      <translation>Invalid profiles: 
+%1</translation>
+    </message>
+    <message>
+      <source>EXISTING_PROFILES</source>
+      <translation>Existing profiles: 
+%1</translation>
+    </message>
+    <message>
+      <source>NOT_INTERSECTED_PROFILES</source>
+      <translation>Not intersected with the hydraulic axis: 
+%1</translation>
+    </message>
+    <message>
+      <source>AXIS_NOT_DEFINED</source>
+      <translation>Hydraulic axis is not defiled.</translation>
+    </message>
+    <message>
+      <source>PROFILES_NOT_DEFINED</source>
+      <translation>At least 2 profiles should be defined.</translation>
+    </message>
+    <message>
+      <source>CONFIRMATION</source>
+      <translation>Confirmation</translation>
+    </message>
+    <message>
+      <source>CONFIRM_AXIS_CHANGE</source>
+      <translation>The following profiles don't intersect the axis:
+%1
+
+Do you want to remove these profiles and continue?</translation>
+    </message>
+    <message>
+      <source>BAD_SELECTED_POLYLINE_TLT</source>
+      <translation>Polyline is not appropriate for channel creation</translation>
+    </message>
+    <message>
+      <source>BAD_SELECTED_POLYLINE_MSG</source>
+      <translation>Polyline '%1' can not be used as hydraulic axis for channel.
+Polyline should consist from one not closed curve.</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ChannelDlg</name>
+    <message>
+      <source>NAME</source>
+      <translation>Name</translation>
+    </message>
+    <message>
+      <source>CHANNEL_NAME</source>
+      <translation>Channel name</translation>
+    </message>
+    <message>
+      <source>CHANNEL_PARAMETERS</source>
+      <translation>Parameters</translation>
+    </message>
+    <message>
+      <source>CHANNEL_GUIDE_LINE</source>
+      <translation>Guide line</translation>
+    </message>
+    <message>
+      <source>CHANNEL_PROFILE</source>
+      <translation>Profile</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ChannelOp</name>
+    <message>
+      <source>CREATE_CHANNEL</source>
+      <translation>Create channel</translation>
+    </message>
+    <message>
+      <source>EDIT_CHANNEL</source>
+      <translation>Edit channel</translation>
+    </message>
+    <message>
+      <source>DEFAULT_CHANNEL_NAME</source>
+      <translation>Channel</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_DigueDlg</name>
+    <message>
+      <source>DIGUE_NAME</source>
+      <translation>Digue name</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_DigueOp</name>
+    <message>
+      <source>CREATE_DIGUE</source>
+      <translation>Create digue</translation>
+    </message>
+    <message>
+      <source>EDIT_DIGUE</source>
+      <translation>Edit digue</translation>
+    </message>
+    <message>
+      <source>DEFAULT_DIGUE_NAME</source>
+      <translation>Digue</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_TranslateObstacleDlg</name>
+    <message>
+      <source>OBSTACLE_NAME</source>
+      <translation>Obstacle name</translation>
+    </message>
+    <message>
+      <source>NAME</source>
+      <translation>Name</translation>
+    </message>
+    <message>
+      <source>TRANSLATION_ARGUMENTS</source>
+      <translation>Arguments</translation>
+    </message>
+    <message>
+      <source>DX</source>
+      <translation>Dx</translation>
+    </message>
+    <message>
+      <source>DY</source>
+      <translation>Dy</translation>
+    </message>
+    <message>
+      <source>DZ</source>
+      <translation>Dz</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_TranslateObstacleOp</name>
+    <message>
+      <source>TRANSLATE_OBSTACLE</source>
+      <translation>Translation of an obstacle</translation>
+    </message>
+  </context>
+  
+
+  <context>
+    <name>HYDROGUI_RunBrowser</name>
+    <message>
+        <source>EXTERNAL_BROWSER_CANNOT_SHOW_PAGE</source>
+        <translation>External browser &quot;%1&quot; can not show help page &quot;%2&quot;. You could change it in preferences.</translation>
+    </message>
+    <message>
+        <source>WRN_DEFINE_EXTERNAL_BROWSER</source>
+        <translation>External browser is not found. Do you want to define it in preferences?</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_ZLevelsDlg</name>
+    <message>
+        <source>CHANGE_LAYER_ORDER</source>
+        <translation>Change layer order</translation>
+    </message>
+    <message>
+        <source>ALL_OBJECTS</source>
+        <translation>All objects</translation>
+    </message>
+    <message>
+        <source>ALL_OBJECTS_UNCHECKED_TLT</source>
+        <translation>Include hidden objects to the list</translation>
+    </message>
+    <message>
+        <source>ALL_OBJECTS_CHECKED_TLT</source>
+        <translation>Exclude hidden objects from the list</translation>
+    </message>
+    <message>
+        <source>APPLY</source>
+        <translation>Apply</translation>
+    </message>
+    <message>
+        <source>CLOSE</source>
+        <translation>Close</translation>
+    </message>
+  </context>
+
+  <context>
+    <name>HYDROGUI_OrderedListWidget</name>
+    <message>
+        <source>TOP_TLT</source>
+        <translation>Move the item(s) on top</translation>
+    </message>
+    <message>
+        <source>UP_TLT</source>
+        <translation>Move the item(s) up</translation>
+    </message>
+    <message>
+        <source>DOWN_TLT</source>
+        <translation>Move the item(s) down</translation>
+    </message>
+    <message>
+        <source>BOTTOM_TLT</source>
+        <translation>Move the item(s) on bottom</translation>
+    </message>
   </context>
 
 </TS>