-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
-//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
+// Copyright (C) 2014-2015 EDF-R&D
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
//
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
-#include "HYDROGUI_Module.h"
-#include "HYDROGUI_ProfileOp.h"
-#include "HYDROGUI_ProfileDlg.h"
-#include "HYDROGUI_Tool.h"
-#include "HYDROGUI_UpdateFlags.h"
-#include "HYDROData_Document.h"
-#include "HYDROData_Profile.h"
-#include "CurveCreator_Profile.hxx"
-#include "CurveCreator_Displayer.h"
+#include <HYDROGUI_Module.h>
+#include <HYDROGUI_ProfileOp.h>
+#include <HYDROGUI_ProfileDlg.h>
+#include <HYDROGUI_Tool2.h>
+#include <HYDROGUI_UpdateFlags.h>
+#include <HYDROGUI_DataObject.h>
+#include <HYDROData_Document.h>
+#include <HYDROData_Profile.h>
+#include <HYDROGUI_CurveCreatorProfile.h>
+#include <CurveCreator_Displayer.hxx>
#include <LightApp_Application.h>
#include <LightApp_SelectionMgr.h>
if( myProfile )
delete myProfile;
- myProfile = new CurveCreator_Profile();
+ myProfile = new HYDROGUI_CurveCreatorProfile();
HYDROGUI_Operation::startOperation();
HYDROGUI_ProfileDlg* aPanel = (HYDROGUI_ProfileDlg*)inputPanel();
aPanel->reset();
+ setPreviewManager( aPanel->viewManager() );
+ setCursor();
if( myIsEdit )
- myEditedObject = Handle(HYDROData_Profile)::DownCast( HYDROGUI_Tool::GetSelectedObject( module() ) );
+ if ( isApplyAndClose() )
+ myEditedObject = Handle(HYDROData_Profile)::DownCast( HYDROGUI_Tool::GetSelectedObject( module() ) );
QString aProfileName;
if( !myEditedObject.IsNull() )
{
- CurveCreator::Coordinates aCurveCoords;
- CurveCreator::SectionsMap aSectionsMap;
-
- HYDROData_ProfileUZ::PointsList aSectPointsList = myEditedObject->GetParametricPoints();
- CurveCreator::PosPointsList aPoints;
- for ( int k = 1, aNbPoints = aSectPointsList.Size(); k <= aNbPoints; ++k )
+ Handle(HYDROData_ProfileUZ) aProfileUZ = myEditedObject->GetProfileUZ( false );
+ if ( !aProfileUZ.IsNull() )
{
- const HYDROData_ProfileUZ::Point& aSectPoint = aSectPointsList.Value( k );
- aCurveCoords.clear();
- aCurveCoords.push_back( aSectPoint.X() );
- aCurveCoords.push_back( aSectPoint.Y() );
+ CurveCreator::Coordinates aCurveCoords;
+ CurveCreator::SectionsMap aSectionsMap;
+
+ HYDROData_ProfileUZ::PointsList aSectPointsList = aProfileUZ->GetPoints();
+ CurveCreator::PosPointsList aPoints;
+ for ( int k = 1, aNbPoints = aSectPointsList.Size(); k <= aNbPoints; ++k )
+ {
+ const HYDROData_ProfileUZ::Point& aSectPoint = aSectPointsList.Value( k );
+ aCurveCoords.clear();
+ aCurveCoords.push_back( aSectPoint.X() );
+ aCurveCoords.push_back( aSectPoint.Y() );
+
+ CurveCreator_PosPoint* aPosPoint = new CurveCreator_PosPoint( k, aCurveCoords );
+ aPoints.push_back( aPosPoint );
+ }
- CurveCreator_PosPoint* aPosPoint = new CurveCreator_PosPoint( k, aCurveCoords );
- aPoints.push_back( aPosPoint );
+ aSectionsMap[0] = aPoints;
+ myProfile->addPointsInternal( aSectionsMap );
+
+ HYDROData_ProfileUZ::SectionType aSectType = aProfileUZ->GetSectionType( 0 );
+
+ CurveCreator::SectionType aCurveType = CurveCreator::Polyline;
+ if( aSectType == HYDROData_ProfileUZ::SECTION_SPLINE )
+ aCurveType = CurveCreator::Spline;
+
+ myProfile->setSectionType( 0, aCurveType );
}
- aSectionsMap[0] = aPoints;
- myProfile->addPointsInternal( aSectionsMap );
aProfileName = myEditedObject->GetName();
}
void HYDROGUI_ProfileOp::abortOperation()
{
erasePreview();
+ restoreCursor();
HYDROGUI_Operation::abortOperation();
}
void HYDROGUI_ProfileOp::commitOperation()
{
erasePreview();
+ restoreCursor();
HYDROGUI_Operation::commitOperation();
}
}
bool HYDROGUI_ProfileOp::processApply( int& theUpdateFlags,
- QString& theErrorMsg )
+ QString& theErrorMsg,
+ QStringList& theBrowseObjectsEntries )
{
HYDROGUI_ProfileDlg* aPanel = ::qobject_cast<HYDROGUI_ProfileDlg*>( inputPanel() );
if ( !aPanel )
if( aProfileObj.IsNull() )
return false;
+ Handle(HYDROData_ProfileUZ) aProfileUZ = aProfileObj->GetProfileUZ();
+ if ( aProfileUZ.IsNull() )
+ return false;
+
aProfileObj->SetName(aProfileName);
HYDROData_ProfileUZ::PointsList aProfileParamPoints;
}
aProfileObj->SetParametricPoints( aProfileParamPoints );
+ HYDROData_ProfileUZ::SectionType aSectType = HYDROData_ProfileUZ::SECTION_POLYLINE;
+ if ( myProfile->getSectionType( 0 ) == CurveCreator::Spline )
+ aSectType = HYDROData_ProfileUZ::SECTION_SPLINE;
+
+ aProfileUZ->SetSectionType( 0, aSectType );
+
+ if ( !myIsEdit )
+ {
+ aProfileObj->SetBorderColor( aProfileObj->DefaultBorderColor() );
+ }
+
+ // At first we update the child u,z profile object
+ aProfileUZ->Changed( HYDROData_Entity::Geom_2d );
+ aProfileUZ->Update();
+
+ // And now we update our edited object
aProfileObj->Update();
+ module()->setIsToUpdate( aProfileObj );
theUpdateFlags = UF_Model;
+ if ( myIsEdit )
+ theUpdateFlags |= UF_OCCViewer | UF_OCC_Forced | UF_VTKViewer;
+ else
+ {
+ QString anEntry = HYDROGUI_DataObject::dataObjectEntry( aProfileObj );
+ theBrowseObjectsEntries.append( anEntry );
+ }
+
return true;
}
