-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
-//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
+// Copyright (C) 2014-2015 EDF-R&D
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#include "HYDROGUI_Operations.h"
#include "HYDROGUI_CopyPasteOp.h"
+#include "HYDROGUI_CalculationOp.h"
+#include "HYDROGUI_ChannelOp.h"
#include "HYDROGUI_DataModel.h"
+#include "HYDROGUI_CopyPastePositionOp.h"
#include "HYDROGUI_DeleteOp.h"
+#include "HYDROGUI_DigueOp.h"
#include "HYDROGUI_ExportImageOp.h"
+#include "HYDROGUI_ExportFileOp.h"
#include "HYDROGUI_ImportImageOp.h"
+#include "HYDROGUI_ImportPolylineOp.h"
+#include "HYDROGUI_ImportSinusXOp.h"
#include "HYDROGUI_ImportBathymetryOp.h"
-#include "HYDROGUI_CalculationOp.h"
+#include "HYDROGUI_ImmersibleZoneOp.h"
#include "HYDROGUI_Module.h"
#include "HYDROGUI_ObserveImageOp.h"
#include "HYDROGUI_PolylineOp.h"
+#include "HYDROGUI_Poly3DOp.h"
+#include "HYDROGUI_ProfileOp.h"
+#include "HYDROGUI_RemoveImageRefsOp.h"
#include "HYDROGUI_ShowHideOp.h"
+#include "HYDROGUI_StreamOp.h"
#include "HYDROGUI_TwoImagesOp.h"
#include "HYDROGUI_UpdateFlags.h"
-#include "HYDROGUI_UpdateImageOp.h"
+#include "HYDROGUI_UpdateObjectOp.h"
#include "HYDROGUI_VisualStateOp.h"
+#include "HYDROGUI_ImmersibleZoneOp.h"
+#include "HYDROGUI_ImportGeomObjectOp.h"
+#include "HYDROGUI_ImportObstacleFromFileOp.h"
+#include "HYDROGUI_TranslateObstacleOp.h"
+#include "HYDROGUI_ExportCalculationOp.h"
+#include "HYDROGUI_ImportProfilesOp.h"
+#include "HYDROGUI_GeoreferencementOp.h"
+#include "HYDROGUI_SetColorOp.h"
+#include "HYDROGUI_BathymetryBoundsOp.h"
+#include "HYDROGUI_Tool.h"
+#include "HYDROGUI_ZLevelsOp.h"
+#include "HYDROGUI_LocalCSOp.h"
+#include "HYDROGUI_RiverBottomOp.h"
+#include "HYDROGUI_ProfileInterpolateOp.h"
+#include "HYDROGUI_RecognizeContoursOp.h"
+#include "HYDROGUI_SubmersibleOp.h"
+#include "HYDROGUI_StricklerTableOp.h"
+#include "HYDROGUI_DuplicateOp.h"
+#include "HYDROGUI_LandCoverOp.h"
+#include "HYDROGUI_ExportSinusXOp.h"
+#include "HYDROGUI_MergePolylinesOp.h"
+#include "HYDROGUI_SplitPolylinesOp.h"
+#include "HYDROGUI_LandCoverColoringOp.h"
+
+#include <HYDROData_Document.h>
+#include <HYDROData_Obstacle.h>
+#include <HYDROData_SplitToZonesTool.h>
+
+#include <GeometryGUI.h>
+#include <GeometryGUI_Operations.h>
+#include <GEOMBase.h>
+
+#include <SalomeApp_Study.h>
+
+#include <LightApp_Application.h>
#include <CAM_Application.h>
#include <QtxListAction.h>
+#include <QtxActionToolMgr.h>
#include <SUIT_Desktop.h>
#include <SUIT_ResourceMgr.h>
#include <SUIT_Session.h>
+#include <SUIT_MessageBox.h>
#include <QAction>
#include <QApplication>
std::string aDesktop = ( "DSK_" + theSuffix ).toStdString();
std::string aToolbar = ( "STB_" + theSuffix ).toStdString();
std::string aSlotStr = aSlot.toStdString();
- return LightApp_Module::createAction( theId, tr( aMenu.c_str() ), aPixmap,
- tr( aDesktop.c_str() ), tr( aToolbar.c_str() ),
+ return LightApp_Module::createAction( theId, tr( aDesktop.c_str() ), aPixmap,
+ tr( aMenu.c_str() ), tr( aToolbar.c_str() ),
theKey, application()->desktop(), isToggle, this, aSlotStr.c_str() );
}
createAction( CopyId, "COPY", "", Qt::CTRL + Qt::Key_C );
createAction( PasteId, "PASTE", "", Qt::CTRL + Qt::Key_V );
- createAction( ImportImageId, "IMPORT_IMAGE", "", Qt::CTRL + Qt::Key_I );
- createAction( EditImportedImageId, "EDIT_IMPORTED_IMAGE" );
- createAction( ObserveImageId, "OBSERVE_IMAGE" );
- createAction( ExportImageId, "EXPORT_IMAGE" );
- createAction( UpdateImageId, "UPDATE_IMAGE" );
+ createAction( UpdateObjectId, "UPDATE_OBJECT" );
+ createAction( ForcedUpdateObjectId, "FORCED_UPDATE_OBJECT" );
+
+ createAction( ImportImageId, "IMPORT_IMAGE", "IMPORT_IMAGE_ICO", Qt::CTRL + Qt::Key_I );
+ createAction( EditImportedImageId, "EDIT_IMPORTED_IMAGE", "EDIT_IMPORTED_IMAGE_ICO" );
+ createAction( ObserveImageId, "OBSERVE_IMAGE", "OBSERVE_IMAGE_ICO" );
+ createAction( ExportImageId, "EXPORT_IMAGE", "EXPORT_IMAGE_ICO" );
+ createAction( RemoveImageRefsId, "REMOVE_IMAGE_REFERENCE", "REMOVE_IMAGE_REFERENCE_ICO" );
+
+ createAction( ImportPolylineId, "IMPORT_POLYLINE", "IMPORT_POLYLINE_ICO" );
+ createAction( ImportSinusXId, "IMPORT_SINUSX", "IMPORT_SINUSX_ICO" );
+ createAction( ExportSinusXId, "EXPORT_SINUSX", "EXPORT_SINUSX_ICO" );
+
+ createAction( CreatePolylineId, "CREATE_POLYLINE", "CREATE_POLYLINE_ICO" );
+ createAction( EditPolylineId, "EDIT_POLYLINE", "EDIT_POLYLINE_ICO" );
+
+ createAction( CreatePolyline3DId, "CREATE_POLYLINE_3D", "CREATE_POLYLINE_3D_ICO" );
+ createAction( EditPolyline3DId, "EDIT_POLYLINE_3D", "EDIT_POLYLINE_3D_ICO" );
+
+ createAction( CreateProfileId, "CREATE_PROFILE", "CREATE_PROFILE_ICO" );
+ createAction( ImportProfilesId, "IMPORT_PROFILES", "IMPORT_PROFILES_ICO" );
+ createAction( EditProfileId, "EDIT_PROFILE", "EDIT_PROFILE_ICO" );
+ createAction( AllGeoreferencementId, "GEOREFERENCEMENT", "GEOREFERENCEMENT_ICO" );
+ createAction( SelectedGeoreferencementId, "GEOREFERENCEMENT", "GEOREFERENCEMENT_ICO" );
+
+ createAction( ImportBathymetryId, "IMPORT_BATHYMETRY", "IMPORT_BATHYMETRY_ICO", Qt::CTRL + Qt::Key_B );
+ createAction( EditImportedBathymetryId, "EDIT_IMPORTED_BATHYMETRY", "EDIT_IMPORTED_BATHYMETRY_ICO" );
+ createAction( BathymetryBoundsId, "BATHYMETRY_BOUNDS", "BATHYMETRY_BOUNDS_ICO" );
+
+ createAction( CreateImmersibleZoneId, "CREATE_IMMERSIBLE_ZONE", "CREATE_IMMERSIBLE_ZONE_ICO" );
+ createAction( EditImmersibleZoneId, "EDIT_IMMERSIBLE_ZONE", "EDIT_IMMERSIBLE_ZONE_ICO" );
+
+ createAction( CreateStreamId, "CREATE_STREAM", "CREATE_STREAM_ICO" );
+ createAction( EditStreamId, "EDIT_STREAM", "EDIT_STREAM_ICO" );
- createAction( CreatePolylineId, "CREATE_POLYLINE" );
- createAction( EditPolylineId, "EDIT_POLYLINE" );
+ createAction( CreateChannelId, "CREATE_CHANNEL", "CREATE_CHANNEL_ICO" );
+ createAction( EditChannelId, "EDIT_CHANNEL", "EDIT_CHANNEL_ICO" );
- createAction( ImportBathymetryId, "IMPORT_BATHYMETRY", "", Qt::CTRL + Qt::Key_B );
+ createAction( CreateDigueId, "CREATE_DIGUE", "CREATE_DIGUE_ICO" );
+ createAction( EditDigueId, "EDIT_DIGUE", "EDIT_DIGUE_ICO" );
- createAction( CreateCalculationId, "CREATE_CALCULATION" );
- createAction( EditCalculationId, "EDIT_CALCULATION" );
+ createAction( ImportStricklerTableFromFileId, "IMPORT_STRICKLER_TABLE", "IMPORT_STRICKLER_TABLE_ICO" );
+ createAction( ExportStricklerTableFromFileId, "EXPORT_STRICKLER_TABLE", "EXPORT_STRICKLER_TABLE_ICO" );
+ createAction( EditStricklerTableId, "EDIT_STRICKLER_TABLE", "EDIT_STRICKLER_TABLE_ICO" );
+ createAction( DuplicateStricklerTableId, "DUPLICATE_STRICKLER_TABLE", "DUPLICATE_STRICKLER_TABLE_ICO" );
- createAction( FuseImagesId, "FUSE_IMAGES" );
- createAction( EditFusedImageId, "EDIT_FUSED_IMAGE" );
+ createAction( CreateLandCoverId, "CREATE_LAND_COVER", "CREATE_LAND_COVER_ICO" );
+ createAction( EditLandCoverId, "EDIT_LAND_COVER", "EDIT_LAND_COVER_ICO" );
- createAction( CutImagesId, "CUT_IMAGES" );
- createAction( EditCutImageId, "EDIT_CUT_IMAGE" );
+ createAction( ImportObstacleFromFileId, "IMPORT_OBSTACLE_FROM_FILE", "IMPORT_OBSTACLE_FROM_FILE_ICO" );
+ createAction( ImportGeomObjectAsObstacleId, "IMPORT_GEOM_OBJECT_AS_OBSTACLE", "IMPORT_GEOM_OBJECT_ICO" );
+ createAction( ImportGeomObjectAsPolylineId, "IMPORT_GEOM_OBJECT_AS_POLYLINE", "IMPORT_GEOM_OBJECT_ICO" );
+ createAction( CreateBoxId, "CREATE_BOX", "CREATE_BOX_ICO" );
+ createAction( CreateCylinderId, "CREATE_CYLINDER", "CREATE_CYLINDER_ICO" );
+ createAction( TranslateObstacleId, "TRANSLATE_OBSTACLE" );
- createAction( SplitImageId, "SPLIT_IMAGE" );
- createAction( EditSplittedImageId, "EDIT_SPLITTED_IMAGE" );
+ createAction( CreateCalculationId, "CREATE_CALCULATION", "CREATE_CALCULATION_ICO" );
+ createAction( EditCalculationId, "EDIT_CALCULATION", "EDIT_CALCULATION_ICO" );
+ createAction( ExportCalculationId, "EXPORT_CALCULATION", "EXPORT_CALCULATION_ICO" );
- createAction( DeleteId, "DELETE", "", Qt::Key_Delete );
+ createAction( FuseImagesId, "FUSE_IMAGES", "FUSE_IMAGES_ICO" );
+ createAction( EditFusedImageId, "EDIT_FUSED_IMAGE", "EDIT_FUSED_IMAGE_ICO" );
+
+ createAction( CutImagesId, "CUT_IMAGES", "CUT_IMAGES_ICO" );
+ createAction( EditCutImageId, "EDIT_CUT_IMAGE", "EDIT_CUT_IMAGE_ICO" );
+
+ createAction( SplitImageId, "SPLIT_IMAGE", "SPLIT_IMAGE_ICO" );
+ createAction( EditSplittedImageId, "EDIT_SPLITTED_IMAGE", "EDIT_SPLITTED_IMAGE_ICO" );
+
+ createAction( RecognizeContoursId, "RECOGNIZE_CONTOURS", "RECOGNIZE_CONTOURS_ICO" );
+
+ createAction( CopyViewerPositionId, "COPY_VIEWER_POSITION", "" );
+
+ createAction( DeleteId, "DELETE", "", Qt::Key_Delete, false,
+ SLOT( onDelete() ) );
+
+ createAction( SetColorId, "COLOR" );
+ createAction( SetZLevelId, "ZLEVEL" );
+ createAction( EditLocalCSId, "EDIT_LOCAL_CS" );
createAction( ShowId, "SHOW" );
createAction( ShowOnlyId, "SHOW_ONLY" );
createAction( ShowAllId, "SHOW_ALL" );
createAction( HideId, "HIDE" );
createAction( HideAllId, "HIDE_ALL" );
+
+ createAction( RiverBottomId, "CREATE_STREAM_BOTTOM", "CREATE_STREAM_BOTTOM_ICO" );
+ createAction( RiverBottomContextId, "CREATE_STREAM_BOTTOM", "CREATE_STREAM_BOTTOM_ICO" );
+ createAction( ProfileInterpolateId, "PROFILE_INTERPOLATE", "PROFILE_INTERPOLATE_ICO" );
+
+ createAction( SubmersibleId, "SUBMERSIBLE", "SUBMERSIBLE_ICO" );
+ createAction( ExportPolylineId, "EXPORT_POLYLINE", "EXPORT_POLYLINE_ICO" );
+
+ createAction( SplitPolylinesId, "SPLIT_POLYLINES", "SPLIT_POLYLINES_ICO" );
+ createAction( MergePolylinesId, "MERGE_POLYLINES", "MERGE_POLYLINES_ICO" );
+
+ createAction( LandCoverScalarMapModeOnId, "LC_SCALARMAP_COLORING_ON" );
+ createAction( LandCoverScalarMapModeOffId, "LC_SCALARMAP_COLORING_OFF" );
}
void HYDROGUI_Module::createMenus()
int aHydroMenu = 6; // Edit menu id == 5, View menu id == 10
int aHydroId = createMenu( tr( "MEN_DESK_HYDRO" ), -1, -1, aHydroMenu );
createMenu( ImportImageId, aHydroId, -1, -1 );
+ createMenu( ImportPolylineId, aHydroId, -1, -1 );
+ createMenu( ImportSinusXId, aHydroId, -1, -1 );
+ createMenu( ExportSinusXId, aHydroId, -1, -1 );
+
createMenu( ImportBathymetryId, aHydroId, -1, -1 );
+ createMenu( ImportStricklerTableFromFileId, aHydroId, -1, -1 );
createMenu( CreatePolylineId, aHydroId, -1, -1 );
+ createMenu( CreatePolyline3DId, aHydroId, -1, -1 );
+ createMenu( CreateImmersibleZoneId, aHydroId, -1, -1 );
+ createMenu( CreateChannelId, aHydroId, -1, -1 );
+ createMenu( CreateDigueId, aHydroId, -1, -1 );
+ createMenu( CreateLandCoverId, aHydroId, -1, -1 );
+
+ int aNewProfileId = createMenu( tr( "MEN_DESK_PROFILE" ), aHydroId, -1 );
+ createMenu( CreateProfileId, aNewProfileId, -1, -1 );
+ createMenu( ImportProfilesId, aNewProfileId, -1, -1 );
+ createMenu( AllGeoreferencementId, aNewProfileId, -1, -1 );
+
+ int aStreamMenuId = createMenu( tr( "MEN_DESK_STREAM" ), aHydroId, -1 );
+ createMenu( CreateStreamId, aStreamMenuId, -1, -1 );
+ createMenu( RiverBottomId, aStreamMenuId, -1, -1 );
+ createMenu( ProfileInterpolateId, aStreamMenuId, -1, -1 );
+
+ int anObstacleMenuId = createMenu( tr( "MEN_DESK_OBSTACLE" ), aHydroId, -1 );
+ createMenu( ImportObstacleFromFileId, anObstacleMenuId, -1, -1 );
+ createMenu( CreateBoxId, anObstacleMenuId, -1, -1 );
+ createMenu( CreateCylinderId, anObstacleMenuId, -1, -1 );
+
createMenu( CreateCalculationId, aHydroId, -1, -1 );
createMenu( separator(), aHydroId );
+ createMenu( EditLocalCSId, aHydroId, -1, -1 );
+ createMenu( separator(), aHydroId );
createMenu( FuseImagesId, aHydroId, -1, -1 );
createMenu( CutImagesId, aHydroId, -1, -1 );
createMenu( SplitImageId, aHydroId, -1, -1 );
+ createMenu( separator(), aHydroId );
+ createMenu( SplitPolylinesId, aHydroId, -1, -1 );
+ createMenu( MergePolylinesId, aHydroId, -1, -1 );
}
void HYDROGUI_Module::createPopups()
int aToolBar = createTool( tr( "MEN_DESK_HYDRO" ) );
createTool( UndoId, aToolBar );
createTool( RedoId, aToolBar );
+
+ createTool( separator(), aToolBar );
+ createTool( ImportImageId, aToolBar );
+ createTool( ImportPolylineId, aToolBar );
+ createTool( ImportSinusXId, aToolBar );
+ createTool( ExportSinusXId, aToolBar );
+
+ createTool( ImportBathymetryId, aToolBar );
+ createTool( CreatePolylineId, aToolBar );
+ createTool( CreatePolyline3DId, aToolBar );
+
+ createTool( separator(), aToolBar );
+ createTool( CreateProfileId, aToolBar );
+ createTool( ImportProfilesId, aToolBar );
+ createTool( AllGeoreferencementId, aToolBar );
+
+ createTool( separator(), aToolBar );
+ createTool( CreateChannelId, aToolBar );
+ createTool( CreateDigueId, aToolBar );
+
+ createTool( separator(), aToolBar );
+ createTool( CreateImmersibleZoneId, aToolBar );
+ createTool( CreateStreamId, aToolBar );
+
+ createTool( separator(), aToolBar );
+ createTool( ImportObstacleFromFileId, aToolBar );
+ createTool( CreateBoxId, aToolBar );
+ createTool( CreateCylinderId, aToolBar );
+
+ createTool( separator(), aToolBar );
+ createTool( ImportStricklerTableFromFileId, aToolBar );
+
+ createTool( separator(), aToolBar );
+ createTool( CreateLandCoverId, aToolBar );
+
+ createTool( separator(), aToolBar );
+ createTool( CreateCalculationId, aToolBar );
+
+ createTool( separator(), aToolBar );
+ createTool( FuseImagesId, aToolBar );
+ createTool( CutImagesId, aToolBar );
+ createTool( SplitImageId, aToolBar );
}
void HYDROGUI_Module::createUndoRedoActions()
startOperation( anId );
}
+void HYDROGUI_Module::onDelete()
+{
+ SUIT_Operation* anOp = application()->activeStudy()->activeOperation();
+ HYDROGUI_PolylineOp* aPolylineOp = dynamic_cast<HYDROGUI_PolylineOp*>( anOp );
+ if ( aPolylineOp && aPolylineOp->deleteEnabled() )
+ aPolylineOp->deleteSelected();
+ else
+ startOperation( DeleteId );
+}
+
bool HYDROGUI_Module::onUndo( int theNumActions )
{
QApplication::setOverrideCursor( Qt::WaitCursor );
case EditImportedImageId:
anOp = new HYDROGUI_ImportImageOp( aModule, theId == EditImportedImageId );
break;
+ case ImportPolylineId:
+ anOp = new HYDROGUI_ImportPolylineOp( aModule/*, theId == EditImportedPolylineId*/ );
+ break;
+ case ImportSinusXId:
+ anOp = new HYDROGUI_ImportSinusXOp( aModule );
+ break;
+ case ExportSinusXId:
+ anOp = new HYDROGUI_ExportSinusXOp( aModule );
+ break;
case ObserveImageId:
anOp = new HYDROGUI_ObserveImageOp( aModule );
break;
case ExportImageId:
anOp = new HYDROGUI_ExportImageOp( aModule );
break;
- case UpdateImageId:
- anOp = new HYDROGUI_UpdateImageOp( aModule );
+ case UpdateObjectId:
+ case ForcedUpdateObjectId:
+ anOp = new HYDROGUI_UpdateObjectOp( aModule, theId == ForcedUpdateObjectId );
+ break;
+ case ExportPolylineId:
+ anOp = new HYDROGUI_ExportFileOp( aModule );
+ break;
+ case RemoveImageRefsId:
+ anOp = new HYDROGUI_RemoveImageRefsOp( aModule );
+ break;
+ case CreatePolyline3DId:
+ case EditPolyline3DId:
+ anOp = new HYDROGUI_Poly3DOp( aModule, theId == EditPolyline3DId );
break;
case CreatePolylineId:
case EditPolylineId:
anOp = new HYDROGUI_PolylineOp( aModule, theId == EditPolylineId );
break;
+ case CreateProfileId:
+ case EditProfileId:
+ anOp = new HYDROGUI_ProfileOp( aModule, theId == EditProfileId );
+ break;
+ case ProfileInterpolateId:
+ anOp = new HYDROGUI_ProfileInterpolateOp( aModule );
+ break;
+ case ImportProfilesId:
+ anOp = new HYDROGUI_ImportProfilesOp( aModule ) ;
+ break;
+ case AllGeoreferencementId:
+ anOp = new HYDROGUI_GeoreferencementOp( aModule, HYDROGUI_GeoreferencementOp::All ) ;
+ break;
+ case SelectedGeoreferencementId:
+ anOp = new HYDROGUI_GeoreferencementOp( aModule, HYDROGUI_GeoreferencementOp::Selected ) ;
+ break;
case ImportBathymetryId:
- anOp = new HYDROGUI_ImportBathymetryOp( aModule );
+ case EditImportedBathymetryId:
+ anOp = new HYDROGUI_ImportBathymetryOp( aModule, theId == EditImportedBathymetryId );
+ break;
+ case BathymetryBoundsId:
+ anOp = new HYDROGUI_BathymetryBoundsOp( aModule );
+ break;
+ case CreateImmersibleZoneId:
+ case EditImmersibleZoneId:
+ anOp = new HYDROGUI_ImmersibleZoneOp( aModule, theId == EditImmersibleZoneId );
+ break;
+ case CreateStreamId:
+ case EditStreamId:
+ anOp = new HYDROGUI_StreamOp( aModule, theId == EditStreamId );
+ break;
+ case CreateChannelId:
+ case EditChannelId:
+ anOp = new HYDROGUI_ChannelOp( aModule, theId == EditChannelId );
+ break;
+ case CreateDigueId:
+ case EditDigueId:
+ anOp = new HYDROGUI_DigueOp( aModule, theId == EditDigueId );
+ break;
+ case ImportStricklerTableFromFileId:
+ case ExportStricklerTableFromFileId:
+ case EditStricklerTableId:
+ anOp = new HYDROGUI_StricklerTableOp( aModule, theId );
+ break;
+ case CreateLandCoverId:
+ case EditLandCoverId:
+ anOp = new HYDROGUI_LandCoverOp( aModule, theId == EditLandCoverId );
+ break;
+ case DuplicateStricklerTableId:
+ anOp = new HYDROGUI_DuplicateOp( aModule );
break;
case CreateCalculationId:
case EditCalculationId:
anOp = new HYDROGUI_CalculationOp( aModule, theId == EditCalculationId );
break;
+ case ExportCalculationId:
+ anOp = new HYDROGUI_ExportCalculationOp( aModule );
+ break;
case FuseImagesId:
case EditFusedImageId:
anOp = new HYDROGUI_TwoImagesOp( aModule, HYDROGUI_TwoImagesOp::Fuse, theId == EditFusedImageId );
case EditSplittedImageId:
anOp = new HYDROGUI_TwoImagesOp( aModule, HYDROGUI_TwoImagesOp::Split, theId == EditSplittedImageId );
break;
+ case ImportObstacleFromFileId:
+ anOp = new HYDROGUI_ImportObstacleFromFileOp( aModule );
+ break;
+ case ImportGeomObjectAsObstacleId:
+ anOp = new HYDROGUI_ImportGeomObjectOp( aModule, HYDROGUI_ImportGeomObjectOp::ImportSelectedAsObstacle );
+ break;
+ case ImportGeomObjectAsPolylineId:
+ anOp = new HYDROGUI_ImportGeomObjectOp( aModule, HYDROGUI_ImportGeomObjectOp::ImportSelectedAsPolyline );
+ break;
+ case CreateBoxId:
+ anOp = new HYDROGUI_ImportGeomObjectOp( aModule,
+ HYDROGUI_ImportGeomObjectOp::ImportCreatedAsObstacle, GEOMOp::OpBox );
+ break;
+ case CreateCylinderId:
+ anOp = new HYDROGUI_ImportGeomObjectOp( aModule,
+ HYDROGUI_ImportGeomObjectOp::ImportCreatedAsObstacle, GEOMOp::OpCylinder );
+ break;
+ case TranslateObstacleId:
+ anOp = new HYDROGUI_TranslateObstacleOp( aModule );
+ break;
+ case CopyViewerPositionId:
+ anOp = new HYDROGUI_CopyPastePositionOp( aModule, false );
+ break;
case DeleteId:
anOp = new HYDROGUI_DeleteOp( aModule );
break;
+ case SetColorId:
+ anOp = new HYDROGUI_SetColorOp( aModule );
+ break;
+ case SetZLevelId:
+ anOp = new HYDROGUI_ZLevelsOp( aModule );
+ break;
+ case EditLocalCSId:
+ anOp = new HYDROGUI_LocalCSOp( aModule );
+ break;
+ case RiverBottomId:
+ case RiverBottomContextId:
+ anOp = new HYDROGUI_RiverBottomOp( aModule );
+ break;
+ case RecognizeContoursId:
+ anOp = new HYDROGUI_RecognizeContoursOp( aModule );
+ break;
case ShowId:
case ShowOnlyId:
case ShowAllId:
case HideAllId:
anOp = new HYDROGUI_ShowHideOp( aModule, theId );
break;
+ case SubmersibleId:
+ anOp = new HYDROGUI_SubmersibleOp( aModule );
+ break;
+ case SplitPolylinesId:
+ anOp = new HYDROGUI_SplitPolylinesOp( aModule );
+ break;
+ case MergePolylinesId:
+ anOp = new HYDROGUI_MergePolylinesOp( aModule );
+ break;
+ case LandCoverScalarMapModeOnId:
+ case LandCoverScalarMapModeOffId:
+ anOp = new HYDROGUI_LandCoverColoringOp( aModule, theId );
+ break;
}
if( !anOp )
return anOp;
}
+
+bool HYDROGUI_Module::reusableOperation( const int id )
+{
+ if ( id == ImportGeomObjectAsObstacleId ||
+ id == ImportGeomObjectAsPolylineId ) {
+ return false;
+ }
+
+ return LightApp_Module::reusableOperation( id );
+}
+
+/**
+ * Returns true if the object with the given entry can be renamed.
+ * @param theEntry the object entry
+ */
+bool HYDROGUI_Module::renameAllowed( const QString& theEntry ) const
+{
+ // Allow to rename all HYDRO objects
+ Handle(HYDROData_Entity) anEntity = getDataModel()->objectByEntry( theEntry );
+ return !anEntity.IsNull();
+}
+/**
+ * Returns true if the object with the given entry is renamed.
+ * @param theEntry the object entry
+ * @param theName the new name
+ */
+bool HYDROGUI_Module::renameObject( const QString& theEntry, const QString& theName )
+{
+ Handle(HYDROData_Entity) anEntity = getDataModel()->objectByEntry( theEntry );
+ bool aRes = false;
+ if ( !anEntity.IsNull() )
+ {
+ HYDROGUI_DataModel* aModel = getDataModel();
+ if( aModel )
+ {
+ if( anEntity->GetName() != theName )
+ {
+ // check that there are no other objects with the same name in the document
+ Handle(HYDROData_Entity) anObject = HYDROGUI_Tool::FindObjectByName( this, theName );
+ if ( anObject.IsNull() )
+ {
+ SUIT_Operation* anOp = application()->activeStudy()->activeOperation();
+ if ( anOp && anOp->inherits( "HYDROGUI_CalculationOp" ) )
+ {
+ anEntity->SetName( theName );
+ aRes = true;
+ }
+ else
+ {
+ aRes = aModel->rename( anEntity, theName );
+ }
+ }
+ else
+ {
+ // Inform the user that the name is already used
+ QString aTitle = QObject::tr( "INSUFFICIENT_INPUT_DATA" );
+ QString aMessage = QObject::tr( "OBJECT_EXISTS_IN_DOCUMENT" ).arg( theName );
+ SUIT_MessageBox::critical( getApp()->desktop(), aTitle, aMessage );
+ }
+ }
+ }
+ }
+ return aRes;
+}
