-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#include "HYDROGUI_PrsImage.h"
#include "HYDROGUI_Tool.h"
+#include "HYDROGUI_Module.h"
#include <HYDROData_Lambert93.h>
#include <HYDROData_Image.h>
+#include <LightApp_Application.h>
#include <SUIT_FileDlg.h>
#include <SUIT_ResourceMgr.h>
+#include <SUIT_Desktop.h>
+#include <SUIT_MessageBox.h>
#include <SUIT_Session.h>
#include <QtxDoubleSpinBox.h>
QRadioButton* aManualGeodesicBtn = new QRadioButton( tr( "MANUALLY_GEODESIC" ), myTransformGroup );
QRadioButton* aManualCartesianBtn = new QRadioButton( tr( "MANUALLY_LAMBERT93" ), myTransformGroup );
+ QRadioButton* aCartesianFromFileBtn = new QRadioButton( tr( "LAMBERT93_FROM_FILE" ), myTransformGroup );
QRadioButton* aRefImageBtn = new QRadioButton( tr( "BY_REFERENCE_IMAGE" ), myTransformGroup );
myModeGroup = new QButtonGroup( myTransformGroup );
myModeGroup->addButton( aManualGeodesicBtn, HYDROData_Image::ManualGeodesic );
myModeGroup->addButton( aManualCartesianBtn, HYDROData_Image::ManualCartesian );
+ myModeGroup->addButton( aCartesianFromFileBtn, HYDROData_Image::CartesianFromFile );
myModeGroup->addButton( aRefImageBtn, HYDROData_Image::ReferenceImage );
myRefImage = new QComboBox( myTransformGroup );
- QGridLayout* aTransformLayout = new QGridLayout( myTransformGroup );
+ QVBoxLayout* aTransformLayout = new QVBoxLayout( myTransformGroup );
aTransformLayout->setMargin( 5 );
aTransformLayout->setSpacing( 5 );
aModeLayout->setSpacing( 5 );
aModeLayout->addWidget( aManualGeodesicBtn, 0, 0 );
aModeLayout->addWidget( aManualCartesianBtn, 1, 0 );
- aModeLayout->addWidget( aRefImageBtn, 2, 0 );
- aModeLayout->addWidget( myRefImage, 2, 1 );
+ aModeLayout->addWidget( aCartesianFromFileBtn, 2, 0 );
+ aModeLayout->addWidget( aRefImageBtn, 3, 0 );
+ aModeLayout->addWidget( myRefImage, 3, 1 );
aModeLayout->setColumnStretch( 1, 1 );
- aTransformLayout->addLayout( aModeLayout, 0, 0, 1, 9 );
+ aTransformLayout->addLayout( aModeLayout );
- QLabel* aImageCSLabel = new QLabel( tr( "IMAGE_CS" ), myTransformGroup );
- QLabel* aGeodesicLabel = new QLabel( tr( "GEODESIC" ), myTransformGroup );
- QLabel* aLambertLabel = new QLabel( tr( "LAMBERT93" ), myTransformGroup );
- QLabel* aRefImageLabel = new QLabel( tr( "REFERENCE_IMAGE_CS" ), myTransformGroup );
+ // Manual input widget
+ QWidget* aManualInputGroup = new QWidget( myTransformGroup );
+ QGridLayout* aManualInputLayout = new QGridLayout( aManualInputGroup );
+ aManualInputLayout->setMargin( 5 );
+ aManualInputLayout->setSpacing( 5 );
- aTransformLayout->addWidget( aImageCSLabel, 2, 1 );
- aTransformLayout->addWidget( aGeodesicLabel, 2, 3, 1, 6 );
- aTransformLayout->addWidget( aLambertLabel, 2, 3, 1, 6 );
- aTransformLayout->addWidget( aRefImageLabel, 2, 3, 1, 6 );
+ QLabel* aImageCSLabel = new QLabel( tr( "IMAGE_CS" ), aManualInputGroup );
+ QLabel* aGeodesicLabel = new QLabel( tr( "GEODESIC" ), aManualInputGroup );
+ QLabel* aLambertLabel = new QLabel( tr( "LAMBERT93" ), aManualInputGroup );
+ QLabel* aRefImageLabel = new QLabel( tr( "REFERENCE_IMAGE_CS" ), aManualInputGroup );
- connect( aManualCartesianBtn, SIGNAL( toggled( bool ) ), aGeodesicLabel, SLOT( setVisible ( bool ) ) );
- connect( aManualCartesianBtn, SIGNAL( toggled( bool ) ), aLambertLabel, SLOT( setHidden ( bool ) ) );
- connect( aManualCartesianBtn, SIGNAL( toggled( bool ) ), aRefImageLabel, SLOT( setHidden ( bool ) ) );
- connect( aManualGeodesicBtn, SIGNAL( toggled( bool ) ), aLambertLabel, SLOT( setVisible ( bool ) ) );
- connect( aManualGeodesicBtn, SIGNAL( toggled( bool ) ), aGeodesicLabel, SLOT( setHidden ( bool ) ) );
- connect( aManualGeodesicBtn, SIGNAL( toggled( bool ) ), aRefImageLabel, SLOT( setHidden ( bool ) ) );
- connect( aRefImageBtn, SIGNAL( toggled( bool ) ), aRefImageLabel, SLOT( setVisible ( bool ) ) );
- connect( aRefImageBtn, SIGNAL( toggled( bool ) ), aGeodesicLabel, SLOT( setHidden ( bool ) ) );
- connect( aRefImageBtn, SIGNAL( toggled( bool ) ), aLambertLabel, SLOT( setHidden ( bool ) ) );
+ aManualInputLayout->addWidget( aImageCSLabel, 0, 1 );
+ aManualInputLayout->addWidget( aGeodesicLabel, 0, 2, 1, 6 );
+ aManualInputLayout->addWidget( aLambertLabel, 0, 2, 1, 6 );
+ aManualInputLayout->addWidget( aRefImageLabel, 0, 2, 1, 6 );
for( int aPointType = HYDROGUI_PrsImage::PointA;
aPointType <= HYDROGUI_PrsImage::PointC; aPointType++ )
QPushButton* aPointBtn = new QPushButton( aPointStr, myTransformGroup );
aPointBtn->setCheckable( true );
- QLabel* aPointXLabel = new QLabel( "X", myTransformGroup );
- QLabel* aPointYLabel = new QLabel( "Y", myTransformGroup );
+ QLabel* aPointXLabel = new QLabel( "X", aManualInputGroup );
+ QLabel* aPointYLabel = new QLabel( "Y", aManualInputGroup );
- QtxIntSpinBox* aPointX = new QtxIntSpinBox( 0, 0, 1, myTransformGroup ); // max is updated later
- QtxIntSpinBox* aPointY = new QtxIntSpinBox( 0, 0, 1, myTransformGroup ); // max is updated later
+ QtxIntSpinBox* aPointX = new QtxIntSpinBox( 0, 0, 1, aManualInputGroup ); // max is updated later
+ QtxIntSpinBox* aPointY = new QtxIntSpinBox( 0, 0, 1, aManualInputGroup ); // max is updated later
- QLabel* aPointArrowLabel = new QLabel( myTransformGroup );
+ QLabel* aPointArrowLabel = new QLabel( aManualInputGroup );
aPointArrowLabel->setPicture( anArrowPicture );
- QLabel* aPointXDegLabel = new QLabel( QChar( 0x00B0 ), myTransformGroup );
- QLabel* aPointYDegLabel = new QLabel( QChar( 0x00B0 ), myTransformGroup );
- QLabel* aPointXMinLabel = new QLabel( "'", myTransformGroup );
- QLabel* aPointYMinLabel = new QLabel( "'", myTransformGroup );
- QLabel* aPointXSecLabel = new QLabel( "\"", myTransformGroup );
- QLabel* aPointYSecLabel = new QLabel( "\"", myTransformGroup );
+ QLabel* aPointXDegLabel = new QLabel( QChar( 0x00B0 ), aManualInputGroup );
+ QLabel* aPointYDegLabel = new QLabel( QChar( 0x00B0 ), aManualInputGroup );
+ QLabel* aPointXMinLabel = new QLabel( "'", aManualInputGroup );
+ QLabel* aPointYMinLabel = new QLabel( "'", aManualInputGroup );
+ QLabel* aPointXSecLabel = new QLabel( "\"", aManualInputGroup );
+ QLabel* aPointYSecLabel = new QLabel( "\"", aManualInputGroup );
+ QLabel* aPointLatLabel = new QLabel( tr( "POINT_LATITUDE" ), aManualInputGroup );
+ QLabel* aPointLonLabel = new QLabel( tr( "POINT_LONGITUDE" ), aManualInputGroup );
myGeodesicLabels << aPointXDegLabel << aPointYDegLabel
<< aPointXMinLabel << aPointYMinLabel
- << aPointXSecLabel << aPointYSecLabel;
+ << aPointXSecLabel << aPointYSecLabel
+ << aPointLonLabel << aPointLatLabel;
- QtxIntSpinBox* aPointXDeg = new QtxIntSpinBox( -180, 180, 1, myTransformGroup );
- QtxIntSpinBox* aPointYDeg = new QtxIntSpinBox( -90, 90, 1, myTransformGroup );
- QtxIntSpinBox* aPointXMin = new QtxIntSpinBox( 0, 59, 1, myTransformGroup );
- QtxIntSpinBox* aPointYMin = new QtxIntSpinBox( 0, 59, 1, myTransformGroup );
- QtxDoubleSpinBox* aPointXSec = new QtxDoubleSpinBox( 0, 59.9999, 1, 4, 4, myTransformGroup );
- QtxDoubleSpinBox* aPointYSec = new QtxDoubleSpinBox( 0, 59.9999, 1, 4, 4, myTransformGroup );
+ QtxIntSpinBox* aPointXDeg = new QtxIntSpinBox( -179, 179, 1, aManualInputGroup );
+ QtxIntSpinBox* aPointYDeg = new QtxIntSpinBox( 0, 89, 1, aManualInputGroup );
+ QtxIntSpinBox* aPointXMin = new QtxIntSpinBox( 0, 59, 1, aManualInputGroup );
+ QtxIntSpinBox* aPointYMin = new QtxIntSpinBox( 0, 59, 1, aManualInputGroup );
+ QtxDoubleSpinBox* aPointXSec = new QtxDoubleSpinBox( 0, 59.9999, 1, 4, 4, aManualInputGroup );
+ QtxDoubleSpinBox* aPointYSec = new QtxDoubleSpinBox( 0, 59.9999, 1, 4, 4, aManualInputGroup );
- QtxDoubleSpinBox* aCartPointX = new QtxDoubleSpinBox( 0, 1e8, 1, 2, 2, myTransformGroup );
- QtxDoubleSpinBox* aCartPointY = new QtxDoubleSpinBox( 0, 1e8, 1, 2, 2, myTransformGroup );
+ QtxDoubleSpinBox* aCartPointX = new QtxDoubleSpinBox( 0, 1e8, 1, 2, 2, aManualInputGroup );
+ QtxDoubleSpinBox* aCartPointY = new QtxDoubleSpinBox( 0, 1e8, 1, 2, 2, aManualInputGroup );
- QtxIntSpinBox* aRefPointX = new QtxIntSpinBox( 0, 0, 1, myTransformGroup ); // max is updated later
- QtxIntSpinBox* aRefPointY = new QtxIntSpinBox( 0, 0, 1, myTransformGroup ); // max is updated later
+ QtxIntSpinBox* aRefPointX = new QtxIntSpinBox( 0, 0, 1, aManualInputGroup ); // max is updated later
+ QtxIntSpinBox* aRefPointY = new QtxIntSpinBox( 0, 0, 1, aManualInputGroup ); // max is updated later
- int aRow = 4 * aPointType + 3;
+ int aRow = 4 * aPointType;
if ( aPointType == HYDROGUI_PrsImage::PointC )
{
- myPointCEnabler = new QCheckBox( myTransformGroup );
- aTransformLayout->addWidget( myPointCEnabler, aRow, 0, 1, 2, Qt::AlignHCenter );
- aTransformLayout->addWidget( aPointBtn, aRow, 2, 1, 7 );
+ myPointCEnabler = new QCheckBox( aManualInputGroup );
+ aManualInputLayout->addWidget( myPointCEnabler, aRow, 0, 1, 2, Qt::AlignHCenter );
+ aManualInputLayout->addWidget( aPointBtn, aRow, 2, 1, 8 );
}
else
{
- aTransformLayout->addWidget( aPointBtn, aRow, 0, 1, 9 );
+ aManualInputLayout->addWidget( aPointBtn, aRow, 0, 1, 10 );
}
- aTransformLayout->addWidget( aPointXLabel, aRow + 1, 0 );
- aTransformLayout->addWidget( aPointX, aRow + 1, 1 );
- aTransformLayout->addWidget( aPointArrowLabel, aRow + 1, 2, 2, 1 );
- aTransformLayout->addWidget( aPointXDeg, aRow + 1, 3 );
- aTransformLayout->addWidget( aPointXDegLabel, aRow + 1, 4 );
- aTransformLayout->addWidget( aPointXMin, aRow + 1, 5 );
- aTransformLayout->addWidget( aPointXMinLabel, aRow + 1, 6 );
- aTransformLayout->addWidget( aPointXSec, aRow + 1, 7 );
- aTransformLayout->addWidget( aPointXSecLabel, aRow + 1, 8 );
-
- aTransformLayout->addWidget( aCartPointX, aRow + 1, 3, 1, 6 );
- aTransformLayout->addWidget( aRefPointX, aRow + 1, 3, 1, 6 );
-
- aTransformLayout->addWidget( aPointYLabel, aRow + 2, 0 );
- aTransformLayout->addWidget( aPointY, aRow + 2, 1 );
- aTransformLayout->addWidget( aPointYDeg, aRow + 2, 3 );
- aTransformLayout->addWidget( aPointYDegLabel, aRow + 2, 4 );
- aTransformLayout->addWidget( aPointYMin, aRow + 2, 5 );
- aTransformLayout->addWidget( aPointYMinLabel, aRow + 2, 6 );
- aTransformLayout->addWidget( aPointYSec, aRow + 2, 7 );
- aTransformLayout->addWidget( aPointYSecLabel, aRow + 2, 8 );
-
- aTransformLayout->addWidget( aCartPointY, aRow + 2, 3, 1, 6 );
- aTransformLayout->addWidget( aRefPointY, aRow + 2, 3, 1, 6 );
+ aManualInputLayout->addWidget( aPointXLabel, aRow + 1, 0 );
+ aManualInputLayout->addWidget( aPointX, aRow + 1, 1 );
+ aManualInputLayout->addWidget( aPointArrowLabel, aRow + 1, 2, 2, 1 );
+ aManualInputLayout->addWidget( aPointXDeg, aRow + 1, 3 );
+ aManualInputLayout->addWidget( aPointXDegLabel, aRow + 1, 4 );
+ aManualInputLayout->addWidget( aPointXMin, aRow + 1, 5 );
+ aManualInputLayout->addWidget( aPointXMinLabel, aRow + 1, 6 );
+ aManualInputLayout->addWidget( aPointXSec, aRow + 1, 7 );
+ aManualInputLayout->addWidget( aPointXSecLabel, aRow + 1, 8 );
+ aManualInputLayout->addWidget( aPointLonLabel, aRow + 1, 9 );
+
+ aManualInputLayout->addWidget( aCartPointX, aRow + 1, 3, 1, 6 );
+ aManualInputLayout->addWidget( aRefPointX, aRow + 1, 3, 1, 6 );
+
+ aManualInputLayout->addWidget( aPointYLabel, aRow + 2, 0 );
+ aManualInputLayout->addWidget( aPointY, aRow + 2, 1 );
+ aManualInputLayout->addWidget( aPointYDeg, aRow + 2, 3 );
+ aManualInputLayout->addWidget( aPointYDegLabel, aRow + 2, 4 );
+ aManualInputLayout->addWidget( aPointYMin, aRow + 2, 5 );
+ aManualInputLayout->addWidget( aPointYMinLabel, aRow + 2, 6 );
+ aManualInputLayout->addWidget( aPointYSec, aRow + 2, 7 );
+ aManualInputLayout->addWidget( aPointYSecLabel, aRow + 2, 8 );
+ aManualInputLayout->addWidget( aPointLatLabel, aRow + 2, 9 );
+
+ aManualInputLayout->addWidget( aCartPointY, aRow + 2, 3, 1, 6 );
+ aManualInputLayout->addWidget( aRefPointY, aRow + 2, 3, 1, 6 );
if( aPointType != HYDROGUI_PrsImage::PointC )
{
- QFrame* aLine = new QFrame( myTransformGroup );
+ QFrame* aLine = new QFrame( aManualInputGroup );
aLine->setFrameShape( QFrame::HLine );
aLine->setFrameShadow( QFrame::Sunken );
- aTransformLayout->addWidget( aLine, aRow + 3, 0, 1, 9 );
+ aManualInputLayout->addWidget( aLine, aRow + 3, 0, 1, 10 );
}
myPointBtnMap[ aPointType ] = aPointBtn;
connect( myPointCEnabler, SIGNAL( toggled( bool ) ), myRefPointXMap[ HYDROGUI_PrsImage::PointC ], SLOT( setEnabled( bool ) ) );
connect( myPointCEnabler, SIGNAL( toggled( bool ) ), myRefPointYMap[ HYDROGUI_PrsImage::PointC ], SLOT( setEnabled( bool ) ) );
- aTransformLayout->setColumnStretch( 1, 1 ); // double
- aTransformLayout->setColumnStretch( 3, 1 ); // degrees
- aTransformLayout->setColumnStretch( 5, 1 ); // minutes
- aTransformLayout->setColumnStretch( 7, 2 ); // seconds (double with 4 digits)
+ connect( myPointCEnabler, SIGNAL( toggled( bool ) ), SLOT( onSetCIsUsed( bool ) ) );
+
+ aManualInputLayout->setColumnStretch( 1, 1 ); // double
+ aManualInputLayout->setColumnStretch( 3, 1 ); // degrees
+ aManualInputLayout->setColumnStretch( 5, 1 ); // minutes
+ aManualInputLayout->setColumnStretch( 7, 2 ); // seconds (double with 4 digits)
+
+ // Image georeferencement file widget
+ QWidget* aFromFileInputGroup = new QWidget( myTransformGroup );
+ QBoxLayout* aFromFileInputLayout = new QHBoxLayout( aFromFileInputGroup );
+ aFromFileInputLayout->setMargin( 5 );
+ aFromFileInputLayout->setSpacing( 5 );
+
+ QLabel* aGeoFileNameLabel = new QLabel( tr( "FILE_NAME" ), aFromFileInputGroup );
+
+ myGeoFileName = new QLineEdit( aFromFileInputGroup );
+ myGeoFileName->setReadOnly( true );
+
+ QToolButton* aGeoBrowseBtn = new QToolButton( aFromFileInputGroup );
+ aGeoBrowseBtn->setIcon( aResMgr->loadPixmap( "HYDRO", tr( "BROWSE_ICO" ) ) );
+
+ aFromFileInputLayout->addWidget( aGeoFileNameLabel );
+ aFromFileInputLayout->addWidget( myGeoFileName );
+ aFromFileInputLayout->addWidget( aGeoBrowseBtn );
+
+ // Widgets connections
+ connect( aManualCartesianBtn, SIGNAL( toggled( bool ) ), aLambertLabel, SLOT( setVisible ( bool ) ) );
+ connect( aManualCartesianBtn, SIGNAL( toggled( bool ) ), aGeodesicLabel, SLOT( setHidden ( bool ) ) );
+ connect( aManualCartesianBtn, SIGNAL( toggled( bool ) ), aRefImageLabel, SLOT( setHidden ( bool ) ) );
+ connect( aManualCartesianBtn, SIGNAL( toggled( bool ) ), aFromFileInputGroup, SLOT( setHidden ( bool ) ) );
+ connect( aManualGeodesicBtn, SIGNAL( toggled( bool ) ), aGeodesicLabel, SLOT( setVisible ( bool ) ) );
+ connect( aManualGeodesicBtn, SIGNAL( toggled( bool ) ), aLambertLabel, SLOT( setHidden ( bool ) ) );
+ connect( aManualGeodesicBtn, SIGNAL( toggled( bool ) ), aRefImageLabel, SLOT( setHidden ( bool ) ) );
+ connect( aManualGeodesicBtn, SIGNAL( toggled( bool ) ), aFromFileInputGroup, SLOT( setHidden ( bool ) ) );
+ connect( aRefImageBtn, SIGNAL( toggled( bool ) ), aRefImageLabel, SLOT( setVisible ( bool ) ) );
+ connect( aRefImageBtn, SIGNAL( toggled( bool ) ), aGeodesicLabel, SLOT( setHidden ( bool ) ) );
+ connect( aRefImageBtn, SIGNAL( toggled( bool ) ), aLambertLabel, SLOT( setHidden ( bool ) ) );
+ connect( aRefImageBtn, SIGNAL( toggled( bool ) ), aFromFileInputGroup, SLOT( setHidden ( bool ) ) );
+ connect( aCartesianFromFileBtn, SIGNAL( toggled( bool ) ), aFromFileInputGroup, SLOT( setVisible ( bool ) ) );
+ connect( aCartesianFromFileBtn, SIGNAL( toggled( bool ) ), aManualInputGroup, SLOT( setHidden ( bool ) ) );
+
+ // Input widgets
+ aTransformLayout->addWidget( aManualInputGroup );
+ aTransformLayout->addWidget( aFromFileInputGroup );
// Common
addWidget( myFileNameGroup );
connect( myModeGroup, SIGNAL( buttonClicked( int ) ),
this, SLOT( onModeActivated( int ) ) );
+ connect( aGeoBrowseBtn, SIGNAL( clicked() ), this, SLOT( onGeoBrowse() ) );
+
connect( myRefImage, SIGNAL( activated( const QString& ) ),
this, SLOT( onRefImageActivated( const QString& ) ) );
{
}
+void HYDROGUI_ImportImageDlg::onSetCIsUsed( bool theCIsUsed )
+{
+ if ( !theCIsUsed && myPointBtnMap[ HYDROGUI_PrsImage::PointC ]->isChecked() )
+ {
+ // Turn on point A selection if point C selection has been activated and we disable point C.
+ myPointBtnMap[ HYDROGUI_PrsImage::PointA ]->toggle();
+ }
+ emit setCIsUsed( theCIsUsed );
+}
+
void HYDROGUI_ImportImageDlg::setIsEdit( const bool theIsEdit )
{
myFileNameGroup->setVisible( !theIsEdit );
myFileName->clear();
myImageName->clear();
myImageNameGroup->setEnabled( false );
+ myGeoFileName->clear();
+ bool isPBlocked = blockSignalsPoints( true );
+ bool isGBlocked = blockSignalsGeodesic( true );
+ bool isCBlocked = blockSignalsCartesian( true );
for( int aPointType = HYDROGUI_PrsImage::PointA;
aPointType <= HYDROGUI_PrsImage::PointC; aPointType++ )
{
aBtn->setChecked( false );
aBtn->blockSignals( anIsBlocked );
- myPointXMap[ aPointType ]->clear();
- myPointYMap[ aPointType ]->clear();
- myPointXDegMap[ aPointType ]->clear();
- myPointYDegMap[ aPointType ]->clear();
- myPointXMinMap[ aPointType ]->clear();
- myPointYMinMap[ aPointType ]->clear();
- myPointXSecMap[ aPointType ]->clear();
- myPointYSecMap[ aPointType ]->clear();
+ clearSpins( myPointXMap[ aPointType ] );
+ clearSpins( myPointYMap[ aPointType ] );
+ clearSpins( myPointXDegMap[ aPointType ] );
+ clearSpins( myPointYDegMap[ aPointType ] );
+ clearSpins( myPointXMinMap[ aPointType ] );
+ clearSpins( myPointYMinMap[ aPointType ] );
+ clearSpins( myPointXSecMap[ aPointType ] );
+ clearSpins( myPointYSecMap[ aPointType ] );
- myRefPointXMap[ aPointType ]->clear();
- myRefPointYMap[ aPointType ]->clear();
+ clearSpins( myRefPointXMap[ aPointType ] );
+ clearSpins( myRefPointYMap[ aPointType ] );
- myCartPointXMap[ aPointType ]->clear();
- myCartPointYMap[ aPointType ]->clear();
+ clearSpins( myCartPointXMap[ aPointType ] );
+ clearSpins( myCartPointYMap[ aPointType ] );
}
- myPointCEnabler->setChecked( true );
- myPointCEnabler->toggle();
+ blockSignalsPoints( isPBlocked );
+ blockSignalsGeodesic( isGBlocked );
+ blockSignalsCartesian( isCBlocked );
+
+ // Emulate turning off C point usage
+ myPointCEnabler->blockSignals( true );
+
+ myPointCEnabler->setChecked( false );
+ myPointBtnMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myPointXMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myPointYMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myPointXDegMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myPointYDegMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myPointXMinMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myPointYMinMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myPointXSecMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myPointYSecMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myCartPointXMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myCartPointYMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myRefPointXMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ myRefPointYMap[ HYDROGUI_PrsImage::PointC ]->setEnabled( false );
+ onSetCIsUsed( false );
+
+ myPointCEnabler->blockSignals( false );
+
myTransformGroup->setEnabled( false );
myRefImage->clear();
return myFileName->text();
}
+void HYDROGUI_ImportImageDlg::setFileName( const QString& theName )
+{
+ myFileName->setText( theName );
+ myImageNameGroup->setEnabled( true );
+ myTransformGroup->setEnabled( true );
+}
+
+QString HYDROGUI_ImportImageDlg::getGeoreferencementFileName() const
+{
+ return myGeoFileName->text();
+}
+
void HYDROGUI_ImportImageDlg::setImageSize( const QSize& theSize,
const bool theIsRefImage )
{
int aXDeg = 0, aYDeg = 0;
int aXMin = 0, aYMin = 0;
double aXSec = 0, aYSec = 0;
- HYDROData_Lambert93::secToDMS( aLPoint.x(), aXDeg, aXMin, aXSec );
- HYDROData_Lambert93::secToDMS( aLPoint.y(), aYDeg, aYMin, aYSec );
+ HYDROData_Lambert93::degToDMS( aLPoint.x(), aXDeg, aXMin, aXSec );
+ HYDROData_Lambert93::degToDMS( aLPoint.y(), aYDeg, aYMin, aYSec );
myPointXDegMap[ aPointType ]->setValue( aXDeg );
myPointYDegMap[ aPointType ]->setValue( aYDeg );
return false;
double aX2 = 0, aY2 = 0;
- HYDROData_Lambert93::DMSToSec( aXDeg, aXMin, aXSec, aX2 );
- HYDROData_Lambert93::DMSToSec( aYDeg, aYMin, aYSec, aY2 );
+ HYDROData_Lambert93::DMSToDeg( aXDeg, aXMin, aXSec, aX2 );
+ HYDROData_Lambert93::DMSToDeg( aYDeg, aYMin, aYSec, aY2 );
TransformationData aData( QPoint( aX1, aY1 ), QPointF( aX2, aY2 ), QPointF( aXCart, aYCart ) );
theMap[ aPointType ] = aData;
{
// Geodesic to Cartesian
double aXCart = 0, aYCart = 0;
- HYDROData_Lambert93::toXY( arx, ary, aXCart, aYCart );
+ // Interpreting arY as attitude and arX as longitude
+ HYDROData_Lambert93::toXY( ary, arx, aXCart, aYCart );
aResTrsfData.GeodesicPoint = theGlobalPoint;
aResTrsfData.CartesianPoint = QPointF( aXCart, aYCart );
if( !aFileName.isEmpty() )
{
QImage anImage( aFileName );
- if( !anImage.isNull() )
+ if( anImage.isNull() )
{
- myFileName->setText( aFileName );
+ QString aTitle = QObject::tr( "INPUT_VALID_DATA" );
+ QString aMessage = QObject::tr( "FILE_CAN_NOT_BE_IMPORTED" ).
+ arg( aFileName ).arg( QFileInfo( aFileName ).suffix() );
+ SUIT_MessageBox::warning( module()->getApp()->desktop(), aTitle, aMessage );
+ }
+ else
+ {
+ setFileName( aFileName );
emit createPreview( anImage );
- myImageNameGroup->setEnabled( true );
- myTransformGroup->setEnabled( true );
}
}
}
+void HYDROGUI_ImportImageDlg::onGeoBrowse()
+{
+ QString aFilter( tr( "IMAGE_GEOREFERENCEMENT_FILTER" ) );
+ QString aGeoFileName = SUIT_FileDlg::getFileName( this, "", aFilter, tr( "IMPORT_GEO_DATA_FROM_FILE" ), true );
+ if( !aGeoFileName.isEmpty() ) {
+ myGeoFileName->setText( aGeoFileName );
+ }
+}
+
void HYDROGUI_ImportImageDlg::onModeActivated( int theMode )
{
bool anIsManualGeodesic = theMode == HYDROData_Image::ManualGeodesic;
blockSignalsGeodesic( false );
}
-void HYDROGUI_ImportImageDlg::blockSignalsGeodesic( const bool theState )
+void HYDROGUI_ImportImageDlg::clearSpins( QAbstractSpinBox* theSpin )
+{
+ if ( dynamic_cast<QtxIntSpinBox*>( theSpin ) )
+ {
+ QtxIntSpinBox* aSpin = dynamic_cast<QtxIntSpinBox*>( theSpin );
+ aSpin->setValue( aSpin->minimum() );
+ }
+ else if ( dynamic_cast<QtxIntSpinBox*>( theSpin ) )
+ {
+ QtxDoubleSpinBox* aDblSpin = dynamic_cast<QtxDoubleSpinBox*>( theSpin );
+ aDblSpin->setValue( aDblSpin->minimum() );
+ }
+
+ theSpin->clear();
+}
+
+bool HYDROGUI_ImportImageDlg::blockSignalsPoints( const bool theState )
+{
+ bool isBlocked = false;
+ for( int aPointType = HYDROGUI_PrsImage::PointA;
+ aPointType <= HYDROGUI_PrsImage::PointC; aPointType++ )
+ {
+ isBlocked =
+ myPointXMap[ aPointType ]->blockSignals( theState ) || isBlocked;
+ myPointYMap[ aPointType ]->blockSignals( theState );
+
+ myRefPointXMap[ aPointType ]->blockSignals( theState );
+ myRefPointYMap[ aPointType ]->blockSignals( theState );
+ }
+ return isBlocked;
+}
+
+bool HYDROGUI_ImportImageDlg::blockSignalsGeodesic( const bool theState )
{
+ bool isBlocked = false;
for( int aPointType = HYDROGUI_PrsImage::PointA;
aPointType <= HYDROGUI_PrsImage::PointC; aPointType++ )
{
- myPointXDegMap[ aPointType ]->blockSignals( theState );
+ isBlocked =
+ myPointXDegMap[ aPointType ]->blockSignals( theState ) || isBlocked;
myPointXMinMap[ aPointType ]->blockSignals( theState );
myPointXSecMap[ aPointType ]->blockSignals( theState );
myPointYDegMap[ aPointType ]->blockSignals( theState );
myPointYMinMap[ aPointType ]->blockSignals( theState );
myPointYSecMap[ aPointType ]->blockSignals( theState );
}
+ return isBlocked;
}
-void HYDROGUI_ImportImageDlg::blockSignalsCartesian( const bool theState )
+bool HYDROGUI_ImportImageDlg::blockSignalsCartesian( const bool theState )
{
+ bool isBlocked = false;
for( int aPointType = HYDROGUI_PrsImage::PointA;
aPointType <= HYDROGUI_PrsImage::PointC; aPointType++ )
{
- myCartPointXMap[ aPointType ]->blockSignals( theState );
+ isBlocked =
+ myCartPointXMap[ aPointType ]->blockSignals( theState ) || isBlocked;
myCartPointYMap[ aPointType ]->blockSignals( theState );
}
+ return isBlocked;
}