}
}
-
aPanel->reset();
QStringList aList;
QStringList anEntryList;
myEditedObject = Handle(HYDROData_CalculationCase)::DownCast( HYDROGUI_Tool::GetSelectedObject( module() ) );
if ( !myEditedObject.IsNull() )
{
+ aPanel->setMode( myEditedObject->GetAssignmentMode() );
anObjectName = myEditedObject->GetName();
aPolylineObj = myEditedObject->GetBoundaryPolyline();
if ( aPolylineObj.IsNull() )
aSeq = myEditedObject->GetGeometryObjects();
getNamesAndEntries( aSeq, aList, anEntryList );
aPanel->includeGeomObjects( aList );
+
+ // set rules
+ HYDROData_ListOfRules aRules;
+ Handle(HYDROData_Object) anObject1, anObject2;
+ HYDROData_PriorityType aPriority;
+ HYDROData_Zone::MergeAltitudesType aMergeType;
+ for ( int anIndex = 0; anIndex < myEditedObject->GetRulesCount(); anIndex++ ) {
+ if ( myEditedObject->GetRule( anIndex, anObject1, aPriority, anObject2, aMergeType ) ) {
+ HYDROData_CustomRule aRule;
+ aRule.Object1 = anObject1;
+ aRule.Object2 = anObject2;
+ aRule.Priority = aPriority;
+ aRule.MergeType = aMergeType;
+
+ aRules << aRule;
+ }
+ }
+ aPanel->setRules( aRules );
}
}
else
{
myEditedObject =
Handle(HYDROData_CalculationCase)::DownCast( doc()->CreateObject( KIND_CALCULATION ) );
- myEditedObject->SetName(anObjectName);
+ myEditedObject->SetName( anObjectName );
+ myEditedObject->SetAssignmentMode( (HYDROData_CalculationCase::AssignmentMode)aPanel->getMode() );
}
aPanel->setObjectName( anObjectName );
HYDROGUI_CalculationDlg* aPanel = new HYDROGUI_CalculationDlg( module(), getName() );
// Connect signals and slots
+ connect( aPanel, SIGNAL( changeMode( int ) ), SLOT( onChangeMode( int ) ) );
connect( aPanel, SIGNAL( addObjects() ), SLOT( onAddObjects() ) );
connect( aPanel, SIGNAL( removeObjects() ), SLOT( onRemoveObjects() ) );
connect( aPanel, SIGNAL( addGroups() ), SLOT( onAddGroups() ) );
myEditedObject->GetBoundaryPolyline();
if ( !aPrevPolyline.IsNull() )
{
- module()->removeObjectShape( HYDROGUI_Module::VMR_PreviewCaseZones, aPrevPolyline );
+ setObjectVisibility( aPrevPolyline, false );
anIsToUpdateViewer = true;
}
Handle(AIS_InteractiveContext) aCtx = aViewer->getAISContext();
if ( !aCtx.IsNull() )
{
- showObject( aNewPolyline, aCtx );
+ setObjectVisibility( aNewPolyline, true );
anIsToUpdateViewer = true;
}
}
if ( anIsToUpdateViewer )
- aViewer->update();
+ module()->update( UF_OCCViewer );
}
}
}
aName = anEntity->GetName();
isSelected = aSelectedObjsMap.contains( aName );
aShape->highlight( isSelected, false );
- aShape->update( false );
+ aShape->update( false, false );
aLastShape = aShape;
}
}
}
if( aLastShape )
- aLastShape->update( true );
+ aLastShape->update( true, false );
}
void HYDROGUI_CalculationOp::onClickedInZonesBrowser( SUIT_DataObject* theItem )
HYDROGUI_Shape* aShape = module()->getObjectShape( HYDROGUI_Module::VMR_PreviewCaseZones, aZone->modelObject() );
if ( aShape )
{
- aShape->update();
+ aShape->update( true, false );
}
}
aPanel->refreshZonesBrowser();
if ( anObject.IsNull() )
continue;
- module()->removeObjectShape( HYDROGUI_Module::VMR_PreviewCaseZones, anObject );
+ setObjectVisibility( anObject, false );
myEditedObject->RemoveGeometryObject( anObject );
}
+ module()->update( UF_OCCViewer );
aPanel->excludeGeomObjects( aSelectedList );
}
// If there are already defined zones then ask a user to confirm zones recalculation
isConfirmed = ( SUIT_MessageBox::question( module()->getApp()->desktop(),
tr( "REGIONS_CHANGED" ),
- tr( "CONFIRM_SPLITTING_ZONES_RECALCULATION" ),
+ tr( "CONFIRM_SPLITTING_ZONES_RECALCULATION_REGIONS" ),
+ QMessageBox::Yes | QMessageBox::No,
+ QMessageBox::No ) == QMessageBox::Yes );
+ }
+ else
+ {
+ isConfirmed = true; // No regions - no zones - nothing to recalculate
+ }
+ }
+ return isConfirmed;
+}
+
+bool HYDROGUI_CalculationOp::confirmModeChange() const
+{
+ // Check if the case is already modified or not
+ bool isConfirmed = myEditedObject->IsMustBeUpdated();
+ if ( !isConfirmed )
+ {
+ // If not modified check if the case has already defined regions with zones
+ HYDROData_SequenceOfObjects aSeq = myEditedObject->GetRegions();
+ if ( aSeq.Length() > 0 )
+ {
+ // If there are already defined zones then ask a user to confirm zones recalculation
+ isConfirmed = ( SUIT_MessageBox::question( module()->getApp()->desktop(),
+ tr( "MODE_CHANGED" ),
+ tr( "CONFIRM_SPLITTING_ZONES_RECALCULATION_MODE" ),
QMessageBox::Yes | QMessageBox::No,
QMessageBox::No ) == QMessageBox::Yes );
}
return isConfirmed;
}
+bool HYDROGUI_CalculationOp::confirmContinueWithWarning( const HYDROData_Warning& theWarning ) const
+{
+ HYDROData_WarningType aType = theWarning.Type;
+ if ( aType == WARN_OK ) {
+ return true;
+ }
+
+ QString aTitle;
+ QString aMsg;
+ switch ( aType )
+ {
+ case WARN_EMPTY_REGIONS:
+ aTitle = tr( "EMPTY_REGIONS" );
+ aMsg = tr( "CONFIRM_CONTINUE_WITH_OBJECTS_NOT_INCLUDED_TO_REGION" ).arg( theWarning.Data );
+ break;
+ default:
+ aTitle = tr( "WARNING" );
+ aMsg = theWarning.Data;
+ }
+
+
+ int anAnswer = SUIT_MessageBox::warning( module()->getApp()->desktop(),
+ aTitle, aMsg,
+ QMessageBox::Yes | QMessageBox::No,
+ QMessageBox::No );
+
+ return ( anAnswer == QMessageBox::Yes );
+}
+
bool HYDROGUI_CalculationOp::processApply( int& theUpdateFlags,
- QString& theErrorMsg )
+ QString& theErrorMsg,
+ QStringList& theBrowseObjectsEntries )
{
HYDROGUI_CalculationDlg* aPanel =
::qobject_cast<HYDROGUI_CalculationDlg*>( inputPanel() );
if ( !aPanel )
return false;
+ if( !myIsEdit )
+ {
+ QString anEntry = HYDROGUI_DataObject::dataObjectEntry( myEditedObject );
+ theBrowseObjectsEntries.append( anEntry );
+ }
+
theUpdateFlags = UF_Model | UF_OCCViewer | UF_OCC_Forced | UF_VTKViewer | UF_VTK_Forced | UF_VTK_Init;
return true;
void HYDROGUI_CalculationOp::onApply()
{
+ // Check warnings
+ HYDROData_Warning aWarning = myEditedObject->GetLastWarning();
+ if ( aWarning.Type != WARN_OK ) {
+ if ( !confirmContinueWithWarning( aWarning ) ) {
+ // Go back to the first page
+ HYDROGUI_CalculationDlg* aPanel =
+ ::qobject_cast<HYDROGUI_CalculationDlg*>( inputPanel() );
+ if ( aPanel ) {
+ aPanel->onFirstPage();
+ }
+ return;
+ }
+ }
+
QApplication::setOverrideCursor( Qt::WaitCursor );
int anUpdateFlags = 0;
QString anErrorMsg;
+ QStringList aBrowseObjectsEntries;
bool aResult = false;
try
{
- aResult = processApply( anUpdateFlags, anErrorMsg );
+ aResult = processApply( anUpdateFlags, anErrorMsg, aBrowseObjectsEntries );
}
catch ( Standard_Failure )
{
{
module()->update( anUpdateFlags );
commit();
+ browseObjects( aBrowseObjectsEntries );
}
else
{
// At first we must to update the case name because of
// automatic names generation for regions and zones
myEditedObject->SetName( aNewCaseName );
-
+
+ // Clear rules
+ myEditedObject->ClearRules();
+
+ // Set parameters for automatic mode
+ int aMode = aPanel->getMode();
+ if ( aMode == HYDROData_CalculationCase::AUTOMATIC ) {
+ // Set objects in the specified order
+ myEditedObject->RemoveGeometryObjects();
+ foreach ( const QString& aName, aPanel->getAllGeomObjects() ) {
+ Handle(HYDROData_Object) anObject = Handle(HYDROData_Object)::DownCast(
+ HYDROGUI_Tool::FindObjectByName( module(), aName ) );
+ if ( anObject.IsNull() ) {
+ continue;
+ }
+
+ myEditedObject->AddGeometryObject( anObject );
+ }
+
+ // Set priority rules
+ foreach ( const HYDROData_CustomRule& aRule, aPanel->getRules() ) {
+ myEditedObject->AddRule( aRule.Object1, aRule.Priority,
+ aRule.Object2, aRule.MergeType );
+ }
+ }
+ aPanel->setMoveZonesEnabled( aMode == HYDROData_CalculationCase::MANUAL );
+
if ( myEditedObject->IsMustBeUpdated() )
{
myShowZones = true;
HYDROData_SequenceOfObjects::Iterator aZonesIter( aZones );
for ( ; aZonesIter.More(); aZonesIter.Next() )
{
- if ( theIsVisible )
- {
- showObject( aZonesIter.Value(), aCtx );
- }
- else
- {
- module()->removeObjectShape( HYDROGUI_Module::VMR_PreviewCaseZones, aZonesIter.Value() );
- }
+ setObjectVisibility( aZonesIter.Value(), theIsVisible );
}
}
}
}
- aViewer->update();
+ module()->update( UF_OCCViewer );
}
}
}
HYDROData_SequenceOfObjects::Iterator anIter( aSeq );
for ( ; anIter.More(); anIter.Next() )
{
- showObject( anIter.Value(), aCtx );
+ setObjectVisibility( anIter.Value(), true );
}
//Process the draw events for viewer
vw->onTopView();
}
- aViewer->update();
+ module()->update( UF_OCCViewer | UF_FitAll );
}
}
-void HYDROGUI_CalculationOp::showObject( Handle(HYDROData_Entity) theEntity, Handle(AIS_InteractiveContext) theCtx )
+void HYDROGUI_CalculationOp::setObjectVisibility( Handle(HYDROData_Entity) theEntity, const bool theIsVisible )
{
- if ( !theEntity.IsNull() )
- {
- HYDROGUI_Shape* aShape = module()->getObjectShape( HYDROGUI_Module::VMR_PreviewCaseZones, theEntity );
- if ( !aShape )
- {
- aShape = new HYDROGUI_Shape( theCtx, theEntity );
- module()->setObjectShape( HYDROGUI_Module::VMR_PreviewCaseZones, theEntity, aShape );
- }
- aShape->update( false );
+ if ( theEntity.IsNull() || !myPreviewViewManager ) {
+ return;
+ }
+
+ OCCViewer_Viewer* aViewer = myPreviewViewManager->getOCCViewer();
+ if ( aViewer ) {
+ module()->setObjectVisible( (size_t)aViewer, theEntity, theIsVisible );
}
}
if( myPreviewViewManager )
{
+ // Hide all the displayed objects in the preview view
+ OCCViewer_Viewer* aViewer = myPreviewViewManager->getOCCViewer();
+ if ( aViewer ) {
+ size_t aViewId = (size_t)aViewer;
+ HYDROData_Iterator anIterator( doc() );
+ for( ; anIterator.More(); anIterator.Next() ) {
+ Handle(HYDROData_Entity) anObject = anIterator.Current();
+ if( !anObject.IsNull() ) {
+ module()->setObjectVisible( aViewId, anObject, false );
+ }
+ }
+ }
+
disconnect( myPreviewViewManager, SIGNAL( lastViewClosed( SUIT_ViewManager* ) ),
this, SLOT( onLastViewClosed( SUIT_ViewManager* ) ) );
aGroupsNames.append( aGroup->GetName() );
}
}
- if( myEditedObject->IsMustBeUpdated() )
- myEditedObject->RemoveGeometryGroups();
+ if( myEditedObject->IsMustBeUpdated() ) {
+ for( int anIndex = 1, aLength = aSeq.Length(); anIndex <= aLength; anIndex++ ) {
+ Handle(HYDROData_ShapesGroup) aGeomGroup =
+ Handle(HYDROData_ShapesGroup)::DownCast( aSeq.Value( anIndex ) );
+ if ( !aGeomGroup.IsNull() && !aGroupsNames.contains( aGeomGroup->GetName() ) ) {
+ myEditedObject->RemoveGeometryGroup( aGeomGroup );
+ }
+ }
+ }
aPanel->setAvailableGroups( aGroupsNames );
aPanel->includeGroups( aList );
aPanel->excludeGroups( aSelectedList );
}
+
+void HYDROGUI_CalculationOp::onChangeMode( int theMode )
+{
+ HYDROGUI_CalculationDlg* aPanel =
+ ::qobject_cast<HYDROGUI_CalculationDlg*>( inputPanel() );
+ if ( !aPanel )
+ return;
+
+ if ( !confirmModeChange() ) {
+ aPanel->setMode( myEditedObject->GetAssignmentMode() );
+ return;
+ }
+
+ myEditedObject->SetAssignmentMode( (HYDROData_CalculationCase::AssignmentMode)theMode );
+ aPanel->setMode( theMode );
+}