-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#include <HYDROData_PolylineXY.h>
#include <HYDROData_ShapesGroup.h>
#include <HYDROData_Iterator.h>
+#include <HYDROData_ImmersibleZone.h>
#include <HYDROData_Object.h>
#include <HYDROData_Tool.h>
myEditedObject = Handle(HYDROData_CalculationCase)::DownCast( HYDROGUI_Tool::GetSelectedObject( module() ) );
if ( !myEditedObject.IsNull() )
{
+ aPanel->setMode( myEditedObject->GetAssignmentMode() );
anObjectName = myEditedObject->GetName();
aPolylineObj = myEditedObject->GetBoundaryPolyline();
if ( aPolylineObj.IsNull() )
aSeq = myEditedObject->GetGeometryObjects();
getNamesAndEntries( aSeq, aList, anEntryList );
aPanel->includeGeomObjects( aList );
+
+ // set rules
+ HYDROData_ListOfRules aRules;
+ Handle(HYDROData_Object) anObject1, anObject2;
+ HYDROData_PriorityType aPriority;
+ HYDROData_Zone::MergeAltitudesType aMergeType;
+ for ( int anIndex = 0; ; anIndex++ )
+ {
+ if ( myEditedObject->GetRule( anIndex, anObject1, aPriority, anObject2, aMergeType ) ) {
+ HYDROData_CustomRule aRule;
+ aRule.Object1 = anObject1;
+ aRule.Object2 = anObject2;
+ aRule.Priority = aPriority;
+ aRule.MergeType = aMergeType;
+
+ aRules << aRule;
+ }
+ else
+ break;
+ }
+ aPanel->setRules( aRules );
}
}
else
{
myEditedObject =
Handle(HYDROData_CalculationCase)::DownCast( doc()->CreateObject( KIND_CALCULATION ) );
- myEditedObject->SetName(anObjectName);
+ myEditedObject->SetName( anObjectName );
+ myEditedObject->SetAssignmentMode( (HYDROData_CalculationCase::AssignmentMode)aPanel->getMode() );
}
aPanel->setObjectName( anObjectName );
HYDROGUI_CalculationDlg* aPanel = new HYDROGUI_CalculationDlg( module(), getName() );
// Connect signals and slots
+ connect( aPanel, SIGNAL( changeMode( int ) ), SLOT( onChangeMode( int ) ) );
connect( aPanel, SIGNAL( addObjects() ), SLOT( onAddObjects() ) );
connect( aPanel, SIGNAL( removeObjects() ), SLOT( onRemoveObjects() ) );
connect( aPanel, SIGNAL( addGroups() ), SLOT( onAddGroups() ) );
aName = anEntity->GetName();
isSelected = aSelectedObjsMap.contains( aName );
aShape->highlight( isSelected, false );
- aShape->update( false );
+ aShape->update( false, false );
aLastShape = aShape;
}
}
}
if( aLastShape )
- aLastShape->update( true );
+ aLastShape->update( true, false );
}
void HYDROGUI_CalculationOp::onClickedInZonesBrowser( SUIT_DataObject* theItem )
HYDROGUI_Shape* aShape = module()->getObjectShape( HYDROGUI_Module::VMR_PreviewCaseZones, aZone->modelObject() );
if ( aShape )
{
- aShape->update();
+ aShape->update( true, false );
}
}
aPanel->refreshZonesBrowser();
// If there are already defined zones then ask a user to confirm zones recalculation
isConfirmed = ( SUIT_MessageBox::question( module()->getApp()->desktop(),
tr( "REGIONS_CHANGED" ),
- tr( "CONFIRM_SPLITTING_ZONES_RECALCULATION" ),
+ tr( "CONFIRM_SPLITTING_ZONES_RECALCULATION_REGIONS" ),
QMessageBox::Yes | QMessageBox::No,
QMessageBox::No ) == QMessageBox::Yes );
}
return isConfirmed;
}
+bool HYDROGUI_CalculationOp::confirmModeChange() const
+{
+ // Check if the case is already modified or not
+ bool isConfirmed = myEditedObject->IsMustBeUpdated();
+ if ( !isConfirmed )
+ {
+ // If not modified check if the case has already defined regions with zones
+ HYDROData_SequenceOfObjects aSeq = myEditedObject->GetRegions();
+ if ( aSeq.Length() > 0 )
+ {
+ // If there are already defined zones then ask a user to confirm zones recalculation
+ isConfirmed = ( SUIT_MessageBox::question( module()->getApp()->desktop(),
+ tr( "MODE_CHANGED" ),
+ tr( "CONFIRM_SPLITTING_ZONES_RECALCULATION_MODE" ),
+ QMessageBox::Yes | QMessageBox::No,
+ QMessageBox::No ) == QMessageBox::Yes );
+ }
+ else
+ {
+ isConfirmed = true; // No regions - no zones - nothing to recalculate
+ }
+ }
+ return isConfirmed;
+}
+
+bool HYDROGUI_CalculationOp::confirmContinueWithWarning( const HYDROData_Warning& theWarning ) const
+{
+ HYDROData_WarningType aType = theWarning.Type;
+ if ( aType == WARN_OK ) {
+ return true;
+ }
+
+ QString aTitle;
+ QString aMsg;
+ switch ( aType )
+ {
+ case WARN_EMPTY_REGIONS:
+ aTitle = tr( "EMPTY_REGIONS" );
+ aMsg = tr( "CONFIRM_CONTINUE_WITH_OBJECTS_NOT_INCLUDED_TO_REGION" ).arg( theWarning.Data );
+ break;
+ default:
+ aTitle = tr( "WARNING" );
+ aMsg = theWarning.Data;
+ }
+
+
+ int anAnswer = SUIT_MessageBox::warning( module()->getApp()->desktop(),
+ aTitle, aMsg,
+ QMessageBox::Yes | QMessageBox::No,
+ QMessageBox::No );
+
+ return ( anAnswer == QMessageBox::Yes );
+}
+
bool HYDROGUI_CalculationOp::processApply( int& theUpdateFlags,
QString& theErrorMsg,
QStringList& theBrowseObjectsEntries )
theBrowseObjectsEntries.append( anEntry );
}
+ // For manual mode priority rules are redundant
+ if ( aPanel->getMode() == HYDROData_CalculationCase::MANUAL ) {
+ myEditedObject->ClearRules( false );
+ }
+
theUpdateFlags = UF_Model | UF_OCCViewer | UF_OCC_Forced | UF_VTKViewer | UF_VTK_Forced | UF_VTK_Init;
return true;
void HYDROGUI_CalculationOp::onApply()
{
+ // Check warnings
+ HYDROData_Warning aWarning = myEditedObject->GetLastWarning();
+ if ( aWarning.Type != WARN_OK ) {
+ if ( !confirmContinueWithWarning( aWarning ) ) {
+ // Go back to the first page
+ HYDROGUI_CalculationDlg* aPanel =
+ ::qobject_cast<HYDROGUI_CalculationDlg*>( inputPanel() );
+ if ( aPanel ) {
+ aPanel->onFirstPage();
+ }
+ return;
+ }
+ }
+
QApplication::setOverrideCursor( Qt::WaitCursor );
int anUpdateFlags = 0;
QString aNewCaseName = aPanel->getObjectName();
QString anOldCaseName = myEditedObject->GetName();
+ bool isNameChanged = anOldCaseName != aNewCaseName;
- bool anIsToUpdateOb = myIsEdit && anOldCaseName != aNewCaseName;
-
+ bool anIsToUpdateOb = isNameChanged;
+
// At first we must to update the case name because of
// automatic names generation for regions and zones
myEditedObject->SetName( aNewCaseName );
-
+
+ // Set parameters for automatic mode
+ int aMode = aPanel->getMode();
+ if ( aMode == HYDROData_CalculationCase::AUTOMATIC ) {
+ // Set objects in the specified order
+ myEditedObject->RemoveGeometryObjects();
+ foreach ( const QString& aName, aPanel->getAllGeomObjects() ) {
+ Handle(HYDROData_Object) anObject = Handle(HYDROData_Object)::DownCast(
+ HYDROGUI_Tool::FindObjectByName( module(), aName ) );
+ if ( anObject.IsNull() ) {
+ continue;
+ }
+
+ myEditedObject->AddGeometryObject( anObject );
+ }
+
+ // Clear priority rules
+ //@ASL if ( myEditedObject->GetRulesCount() > 0 ) {
+ myEditedObject->ClearRules( true );
+ //@ASL }
+ // Set priority rules
+ foreach ( const HYDROData_CustomRule& aRule, aPanel->getRules() ) {
+ myEditedObject->AddRule( aRule.Object1, aRule.Priority,
+ aRule.Object2, aRule.MergeType );
+ }
+ }
+ aPanel->setEditZonesEnabled( aMode == HYDROData_CalculationCase::MANUAL );
+
if ( myEditedObject->IsMustBeUpdated() )
{
myShowZones = true;
myEditedObject->Update();
+
+ AssignDefaultZonesColors();
//aPanel->setEditedObject( myEditedObject );
aPanel->refreshZonesBrowser();
-
+
+ closePreview();
createPreview();
+
+ anIsToUpdateOb = true;
}
else
{
setZonesVisible( true );
+
+ if ( isNameChanged ) {
+ module()->getDataModel()->updateObjectTree( myEditedObject );
+ }
}
- if ( anIsToUpdateOb )
- module()->getApp()->updateObjectBrowser( false );
+ if ( anIsToUpdateOb ) {
+ SUIT_DataBrowser* anObjBrowser = ((LightApp_Application*)module()->application())->objectBrowser();
+ if ( anObjBrowser ) {
+ anObjBrowser->updateTree( module()->getDataModel()->getDataObject( myEditedObject ), false );
+ }
+ }
QApplication::restoreOverrideCursor();
}
}
}
+void HYDROGUI_CalculationOp::AssignDefaultZonesColors()
+{
+ HYDROData_SequenceOfObjects aRegions = myEditedObject->GetRegions();
+ HYDROData_SequenceOfObjects::Iterator aRegionsIter( aRegions );
+ HYDROData_SequenceOfObjects aZones;
+ Handle(HYDROData_Region) aRegion;
+ if ( myPreviewViewManager )
+ {
+ if ( OCCViewer_Viewer* aViewer = myPreviewViewManager->getOCCViewer() )
+ {
+ Handle(AIS_InteractiveContext) aCtx = aViewer->getAISContext();
+ if ( !aCtx.IsNull() )
+ {
+ int aCounter = 0;
+ for ( ; aRegionsIter.More(); aRegionsIter.Next() )
+ {
+ aRegion = Handle(HYDROData_Region)::DownCast( aRegionsIter.Value() );
+ if ( !aRegion.IsNull() )
+ {
+ aZones = aRegion->GetZones();
+ HYDROData_SequenceOfObjects::Iterator aZonesIter( aZones );
+ for ( ; aZonesIter.More(); aZonesIter.Next() )
+ {
+ // Zone
+ Handle(HYDROData_Zone) aZone = Handle(HYDROData_Zone)::DownCast( aZonesIter.Value() );
+ if ( !aZone.IsNull() )
+ {
+ QColor aFillingColor = GenerateDefaultZonesColor(++aCounter);
+ while (aFillingColor == Qt::red)
+ aFillingColor = GenerateDefaultZonesColor(++aCounter);
+
+ aZone->SetColor(aFillingColor);
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+}
+
+QColor HYDROGUI_CalculationOp::GenerateDefaultZonesColor( int theIndex,
+ float theSaturation/* = 0.5*/,
+ float theValue/* = 0.95*/ ) const
+{
+ float aGoldenRatioConjugate = (float)(360./582.);
+ float aHue = (float)rand();
+ aHue += aGoldenRatioConjugate*theIndex;
+ aHue -= floor(aHue);
+
+ float aR = 0., aG = 0., aB = 0.;
+ int aHueInt = (int)(aHue*6.);
+ float aF = aHue*6. - aHueInt;
+ float aP = theValue * (1. - theSaturation);
+ float aQ = theValue * (1. - aF*theSaturation);
+ float aT = theValue * (1. - (1. - aF) * theSaturation);
+ switch (aHueInt)
+ {
+ case 0: { aR = theValue; aG = aT; aB = aP; break; }
+ case 1: { aR = aQ; aG = theValue; aB = aP; break; }
+ case 2: { aR = aP; aG = theValue; aB = aT; break; }
+ case 3: { aR = aP; aG = aQ; aB = theValue; break; }
+ case 4: { aR = aT; aG = aP; aB = theValue; break; }
+ case 5: { aR = theValue; aG = aP; aB = aQ; break; }
+ default: break;
+ }
+
+ QColor aColor = QColor( (int)(aR*256.), (int)(aG*256.), (int)(aB*256.) );
+ return ( aColor.isValid() ? aColor : HYDROData_ImmersibleZone::DefaultFillingColor() );
+}
+
void HYDROGUI_CalculationOp::createPreview()
{
LightApp_Application* anApp = module()->getApp();
aPanel->excludeGroups( aSelectedList );
}
+
+void HYDROGUI_CalculationOp::onChangeMode( int theMode )
+{
+ HYDROGUI_CalculationDlg* aPanel =
+ ::qobject_cast<HYDROGUI_CalculationDlg*>( inputPanel() );
+ if ( !aPanel )
+ return;
+
+ if ( !confirmModeChange() ) {
+ aPanel->setMode( myEditedObject->GetAssignmentMode() );
+ return;
+ }
+
+ myEditedObject->SetAssignmentMode( (HYDROData_CalculationCase::AssignmentMode)theMode );
+ aPanel->setMode( theMode );
+}