-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
-//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
+// Copyright (C) 2014-2015 EDF-R&D
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#include "HYDROGUI_CalculationDlg.h"
#include "HYDROGUI_ObjSelector.h"
-#include "HYDROGUI_Tool.h"
+#include "HYDROGUI_Tool2.h"
#include "HYDROGUI_DataBrowser.h"
#include "HYDROGUI_DataModel.h"
+#include "HYDROGUI_ListSelector.h"
#include "HYDROGUI_Module.h"
#include "HYDROGUI_DataObject.h"
#include "HYDROGUI_NameValidator.h"
#include "HYDROGUI_Region.h"
#include "HYDROGUI_Zone.h"
+#include "HYDROGUI_OrderedListWidget.h"
+#include "HYDROGUI_PriorityWidget.h"
+#include "HYDROGUI_PriorityTableModel.h"
#include <HYDROData_Document.h>
#include <HYDROData_Entity.h>
#include <SUIT_Study.h>
#include <LightApp_Application.h>
+#include <LightApp_SelectionMgr.h>
#include <SUIT_Desktop.h>
#include <SUIT_MessageBox.h>
+#include <QButtonGroup>
+#include <QComboBox>
#include <QGroupBox>
#include <QLabel>
#include <QLayout>
#include <QListWidget>
#include <QPicture>
#include <QPushButton>
+#include <QRadioButton>
+#include <QSplitter>
+#include <QTableWidget>
#include <QToolButton>
+#include <QTreeView>
#include <QWizardPage>
-#include <QComboBox>
-#include <QStackedWidget>
+
HYDROGUI_CalculationDlg::HYDROGUI_CalculationDlg( HYDROGUI_Module* theModule, const QString& theTitle )
: HYDROGUI_Wizard( theModule, theTitle )
{
addPage( createObjectsPage() );
addPage( createGroupsPage() );
+ addPage( createLandCoverMapPage() );
addPage( createZonesPage() );
}
void HYDROGUI_CalculationDlg::reset()
{
myObjectName->clear();
- myGeomObjects->clear();
+ HYDROGUI_ListModel::Object2VisibleList anObject2VisibleList;
+ myGeomObjects->setObjects(anObject2VisibleList);
myPolylineName->clear();
+ myLandCoverMapName->clear();
+ myStricklerTableName->clear();
myAvailableGeomObjects->clear();
+
+ // Activate the automatic mode
+ setMode( HYDROData_CalculationCase::AUTOMATIC );
+
+ // Reset the priority widget state
+ QList<Handle(HYDROData_Entity)> anObjects;
+ myPriorityWidget->setObjects( anObjects );
}
QWizardPage* HYDROGUI_CalculationDlg::createObjectsPage() {
QWizardPage* aPage = new QWizardPage( mainFrame() );
QFrame* aFrame = new QFrame( aPage );
- // Calculation name
+ // Splitter
+ mySplitter = new QSplitter(Qt::Vertical);
+
+ // Top of the page
+ QWidget* aTopContainer = new QWidget;
+
+ // calculation name
myObjectName = new QLineEdit( aPage );
myValidator = new HYDROGUI_NameValidator(module(), myObjectName);
myObjectName->setValidator( myValidator );
connect( myValidator, SIGNAL( emptyName() ), SLOT( onEmptyName() ) );
connect( myValidator, SIGNAL( alreadyExists( QString ) ), SLOT( onAlreadyExists( QString ) ) );
+ // polyline name
myPolylineName = new QComboBox( aPage );
connect( myPolylineName, SIGNAL( activated( const QString & ) ),
SIGNAL( boundarySelected( const QString & ) ) );
- myGeomObjects = new QListWidget( aPage );
- myGeomObjects->setSelectionMode( QListWidget::ExtendedSelection );
- myGeomObjects->setEditTriggers( QListWidget::NoEditTriggers );
- myGeomObjects->setViewMode( QListWidget::ListMode );
- myGeomObjects->setSortingEnabled( true );
+ // names labels
+ QLabel* aNameLabel = new QLabel( tr( "NAME" ), aPage );
+ QLabel* aLimitsLabel = new QLabel( tr( "LIMITS" ), aPage );
+
+ // mode selector (auto/manual)
+ QGroupBox* aModeGroup = new QGroupBox( tr( "MODE" ) );
+ QRadioButton* aManualRB = new QRadioButton( tr( "MANUAL" ), mainFrame() );
+ QRadioButton* anAutoRB = new QRadioButton( tr( "AUTO" ), mainFrame() );
+
+ myModeButtons = new QButtonGroup( mainFrame() );
+ myModeButtons->addButton( anAutoRB, HYDROData_CalculationCase::AUTOMATIC );
+ myModeButtons->addButton( aManualRB, HYDROData_CalculationCase::MANUAL );
+
+ QBoxLayout* aModeSelectorLayout = new QHBoxLayout;
+ aModeSelectorLayout->setMargin( 5 );
+ aModeSelectorLayout->setSpacing( 5 );
+ aModeSelectorLayout->addWidget( anAutoRB );
+ aModeSelectorLayout->addWidget( aManualRB );
+ aModeGroup->setLayout( aModeSelectorLayout );
+
+ // geometry objects
+ QLabel* anObjectsLabel = new QLabel( tr( "CALCULATION_REFERENCE_OBJECTS" ) );
+ myGeomObjects = new HYDROGUI_OrderedListWidget( aPage, 16 );
+ myGeomObjects->setHiddenObjectsShown(true);
+ myGeomObjects->setVisibilityIconShown(false);
+ myGeomObjects->setContentsMargins(QMargins());
+
+ // included geometry objects
+ QLabel* anIncludedLabel = new QLabel( tr( "INCLUDED_OBJECTS" ) );
myAvailableGeomObjects = new QListWidget( aPage );
myAvailableGeomObjects->setSelectionMode( QListWidget::ExtendedSelection );
myAvailableGeomObjects->setEditTriggers( QListWidget::NoEditTriggers );
myAvailableGeomObjects->setViewMode( QListWidget::ListMode );
myAvailableGeomObjects->setSortingEnabled( true );
- connect( myGeomObjects, SIGNAL( itemSelectionChanged() ),
- SIGNAL( objectsSelected() ) );
-
- QFrame* anObjectsFrame = new QFrame( aPage );
- QGridLayout* anObjsLayout = new QGridLayout( anObjectsFrame );
- anObjsLayout->setMargin( 5 );
- anObjsLayout->setSpacing( 5 );
- anObjectsFrame->setLayout( anObjsLayout );
-
- QFrame* aBtnsFrame = new QFrame( anObjectsFrame );
+ // buttons
+ QFrame* aBtnsFrame = new QFrame;
QVBoxLayout* aBtnsLayout = new QVBoxLayout( aBtnsFrame );
aBtnsLayout->setMargin( 5 );
aBtnsLayout->setSpacing( 5 );
QPushButton* anAddBtn = new QPushButton( tr("INCLUDE"), aBtnsFrame );
QPushButton* aRemoveBtn = new QPushButton( tr("EXCLUDE"), aBtnsFrame );
- // Fill the butons frame with two buttons
+ // fill the butons frame with two buttons
aBtnsLayout->addWidget( anAddBtn );
aBtnsLayout->addWidget( aRemoveBtn );
aBtnsLayout->addStretch( 1 );
-
- QLabel* anIncludedLabel = new QLabel( tr( "INCLUDED_OBJECTS" ), anObjectsFrame );
- QLabel* anObjectsLabel = new QLabel( tr( "CALCULATION_REFERENCE_OBJECTS" ), anObjectsFrame );
-
- // Fill the objects frame with two lists, two labels and with buttons frame
+
+ // top of the page layout
+
+ // objects frame
+ QFrame* anObjectsFrame = new QFrame( aPage );
+ anObjectsFrame->setFrameStyle( QFrame::Panel | QFrame::Raised );
+ QGridLayout* anObjsLayout = new QGridLayout( anObjectsFrame );
+ anObjsLayout->setMargin( 5 );
+ anObjsLayout->setSpacing( 5 );
+ anObjectsFrame->setLayout( anObjsLayout );
+
+ // fill the objects frame with two lists, two labels and with buttons frame
anObjsLayout->addWidget( anObjectsLabel, 0, 0, Qt::AlignHCenter );
anObjsLayout->addWidget( anIncludedLabel, 0, 2, Qt::AlignHCenter );
- anObjsLayout->addWidget( myAvailableGeomObjects, 1, 0, Qt::AlignHCenter );
+ anObjsLayout->addWidget( myAvailableGeomObjects, 1, 0 );
anObjsLayout->addWidget( aBtnsFrame, 1, 1, Qt::AlignHCenter );
- anObjsLayout->addWidget( myGeomObjects, 1, 2, Qt::AlignHCenter );
-
-
- QLabel* aNameLabel = new QLabel( tr( "NAME" ), aPage );
- QLabel* aLimitsLabel = new QLabel( tr( "LIMITS" ), aPage );
-
- // Fill the page
- QGridLayout* aPageLayout = new QGridLayout( aPage );
+ anObjsLayout->addWidget( myGeomObjects, 1, 2 );
+
+ // fill the top of the page
+ QGridLayout* aTopLayout = new QGridLayout;
+ aTopLayout->setMargin( 5 );
+ aTopLayout->setSpacing( 5 );
+ aTopLayout->setVerticalSpacing( 10 );
+ aTopLayout->addWidget( aNameLabel, 0, 0, Qt::AlignHCenter );
+ aTopLayout->addWidget( myObjectName, 0, 1 );
+ aTopLayout->addWidget( aLimitsLabel, 1, 0, Qt::AlignHCenter );
+ aTopLayout->addWidget( myPolylineName, 1, 1 );
+ aTopLayout->addWidget( aModeGroup, 2, 0, 1, 2 );
+ aTopLayout->addWidget( anObjectsFrame, 3, 0, 1, 2 );
+
+ aTopContainer->setLayout( aTopLayout );
+
+ // add the top of the page to the splitter
+ mySplitter->insertWidget(0, aTopContainer);
+ mySplitter->setStretchFactor(0, 2);
+
+ // Bottom of the page
+ myPriorityWidget = new HYDROGUI_PriorityWidget( mainFrame() );
+
+ QGroupBox* aPriorityGroup = new QGroupBox( tr( "PRIORITY" ) );
+ QBoxLayout* aPriorityLayout = new QHBoxLayout;
+ aPriorityLayout->setMargin( 5 );
+ aPriorityLayout->setSpacing( 5 );
+ aPriorityLayout->addWidget( myPriorityWidget );
+ aPriorityGroup->setLayout( aPriorityLayout );
+
+ // add the bottom of the page to the splitter
+ mySplitter->insertWidget(1, aPriorityGroup);
+ mySplitter->setStretchFactor(1, 1);
+
+ // Page layout
+ QVBoxLayout* aPageLayout = new QVBoxLayout;
aPageLayout->setMargin( 5 );
aPageLayout->setSpacing( 5 );
- aPageLayout->setVerticalSpacing( 10 );
- aPageLayout->addWidget( aNameLabel, 0, 0, Qt::AlignHCenter );
- aPageLayout->addWidget( myObjectName, 0, 1 );
- aPageLayout->addWidget( aLimitsLabel, 1, 0, Qt::AlignHCenter );
- aPageLayout->addWidget( myPolylineName, 1, 1 );
- aPageLayout->addWidget( anObjectsFrame, 2, 0, 1, 2, Qt::AlignHCenter );
+ aPageLayout->addWidget( mySplitter );
aPage->setLayout( aPageLayout );
+ // Create selector
+ if ( module() ) {
+ HYDROGUI_ListSelector* aListSelector =
+ new HYDROGUI_ListSelector( myGeomObjects, module()->getApp()->selectionMgr() );
+ aListSelector->setAutoBlock( true );
+ }
+
+ // Connections
+ connect( myModeButtons, SIGNAL( buttonClicked( int ) ), SIGNAL( changeMode( int ) ) );
connect( anAddBtn, SIGNAL( clicked() ), SIGNAL( addObjects() ) );
connect( aRemoveBtn, SIGNAL( clicked() ), SIGNAL( removeObjects() ) );
+ connect( myGeomObjects, SIGNAL( orderChanged() ), SLOT( onOrderChanged() ) );
+
+ connect( myPriorityWidget, SIGNAL( ruleChanged() ), SLOT( onRuleChanged() ) );
+
return aPage;
}
// Fill the objects frame with two lists, two labels and with buttons frame
aGroupsLayout->addWidget( anAvailableLabel, 0, 0, Qt::AlignHCenter );
aGroupsLayout->addWidget( anIncludedLabel, 0, 2, Qt::AlignHCenter );
- aGroupsLayout->addWidget( myAvailableGroups, 1, 0, Qt::AlignHCenter );
+ aGroupsLayout->addWidget( myAvailableGroups, 1, 0 );
aGroupsLayout->addWidget( aBtnsFrame, 1, 1, Qt::AlignHCenter );
- aGroupsLayout->addWidget( myGroups, 1, 2, Qt::AlignHCenter );
+ aGroupsLayout->addWidget( myGroups, 1, 2 );
// Fill the page
QGridLayout* aPageLayout = new QGridLayout( aPage );
aPageLayout->setMargin( 5 );
aPageLayout->setSpacing( 5 );
aPageLayout->setVerticalSpacing( 10 );
- aPageLayout->addWidget( aGroupsFrame, 0, 0, Qt::AlignHCenter );
+ aPageLayout->addWidget( aGroupsFrame, 0, 0 );
aPage->setLayout( aPageLayout );
return aPage;
}
+QWizardPage* HYDROGUI_CalculationDlg::createLandCoverMapPage() {
+ QWizardPage* aPage = new QWizardPage( mainFrame() );
+ QFrame* aFrame = new QFrame( aPage );
+
+ // Top of the page
+ QWidget* aTopContainer = new QWidget;
+
+ // Combo-box to choose land cover map object
+ QLabel* aLandCoverMapLabel = new QLabel( tr( "LAND_COVER_MAP" ), aPage );
+ myLandCoverMapName = new QComboBox( aPage );
+ myLandCoverMapName->setSizePolicy( QSizePolicy( QSizePolicy::Expanding, QSizePolicy::Fixed ) );
+ connect( myLandCoverMapName, SIGNAL( activated( const QString & ) ),
+ SIGNAL( landCoverMapSelected( const QString & ) ) );
+ // Combo-box to choose Strickler table name
+ QLabel* aStricklerTableLabel = new QLabel( tr( "STRICKLER_TABLE" ), aPage );
+ myStricklerTableName = new QComboBox( aPage );
+ myStricklerTableName->setSizePolicy( QSizePolicy( QSizePolicy::Expanding, QSizePolicy::Fixed ) );
+ connect( myStricklerTableName, SIGNAL( activated( const QString & ) ),
+ SIGNAL( StricklerTableSelected( const QString & ) ) );
+
+ // Fill the top layout of the page
+ QGridLayout* aGridLayout = new QGridLayout;
+ aGridLayout->setMargin( 5 );
+ aGridLayout->setSpacing( 5 );
+ aGridLayout->setVerticalSpacing( 10 );
+ aGridLayout->addWidget( aLandCoverMapLabel, 0, 0 );
+ aGridLayout->addWidget( myLandCoverMapName, 0, 1 );
+ aGridLayout->addWidget( aStricklerTableLabel, 1, 0 );
+ aGridLayout->addWidget( myStricklerTableName, 1, 1 );
+
+ QVBoxLayout* aTopLayout = new QVBoxLayout;
+ aTopLayout->setMargin( 5 );
+ aTopLayout->setSpacing( 5 );
+ aTopLayout->addLayout( aGridLayout );
+ aTopLayout->addStretch( 1 );
+
+ aTopContainer->setLayout( aTopLayout );
+
+ aPage->setLayout( aTopLayout );
+
+ return aPage;
+}
+
QWizardPage* HYDROGUI_CalculationDlg::createZonesPage() {
QWizardPage* aPage = new QWizardPage( mainFrame() );
QFrame* aFrame = new QFrame( aPage );
QGridLayout* aLayout = new QGridLayout( aPage );
+
+ QLabel* aResultsOnGeomObjectsLabel = new QLabel( tr( "RESULTS_ON_GEOMETRY_OBJECTS" ), aFrame );
myBrowser = new HYDROGUI_DataBrowser( module(), NULL, aPage );
myBrowser->setAutoOpenLevel( 3 );
aLayout->setMargin( 5 );
aLayout->setSpacing( 5 );
- aLayout->addWidget( myBrowser, 0, 0, 1, 2 );
+ aLayout->addWidget( aResultsOnGeomObjectsLabel, 0, 0 );
+ aLayout->addWidget( myBrowser, 1, 0, 1, 2 );
- myBatimetryLabel = new QLabel( tr( "BATHYMETRY" ), aFrame );
+ myBathymetryLabel = new QLabel( tr( "BATHYMETRY" ), aFrame );
myBathymetryChoice = new QComboBox( aFrame );
myBathymetryChoice->setVisible( false );
- myBatimetryLabel->setVisible( false );
+ myBathymetryLabel->setVisible( false );
- aLayout->addWidget( myBatimetryLabel, 1, 0 );
- aLayout->addWidget( myBathymetryChoice, 1, 1 );
+ aLayout->addWidget( myBathymetryLabel, 2, 0 );
+ aLayout->addWidget( myBathymetryChoice, 2, 1 );
+
+ QPushButton* aRegenerateBtn = new QPushButton( tr( "REGENERATE_COLORS" ), this );
+ aLayout->addWidget( aRegenerateBtn, 3, 0 );
aPage->setLayout( aLayout );
connect( myBrowser,
SIGNAL( dropped( const QList<SUIT_DataObject*>&, SUIT_DataObject*, int, Qt::DropAction ) ),
SLOT( onZonesDropped( const QList<SUIT_DataObject*>&, SUIT_DataObject*, int, Qt::DropAction ) ) );
-
+ connect( myBrowser, SIGNAL( newRegion() ), this, SLOT( OnNewRegion() ) );
+ connect( aRegenerateBtn, SIGNAL( clicked() ), this, SIGNAL( regenerateColors() ) );
return aPage;
}
-
bool HYDROGUI_CalculationDlg::acceptCurrent() const
{
QString anErrorMsg;
- if ( myGeomObjects->count() == 0 )
+ if ( false /*myGeomObjects->count() == 0*/ )
{
anErrorMsg = tr( "EMPTY_GEOMETRY_OBJECTS" );
}
}
}
+void HYDROGUI_CalculationDlg::OnNewRegion()
+{
+ emit createRegion( myBrowser->getSelected() );
+}
+
void HYDROGUI_CalculationDlg::onMergeTypeSelected( int theIndex )
{
int aType = myBathymetryChoice->itemData( theIndex ).toInt();
myBathymetryChoice->addItem( tr("MERGE_UNKNOWN"), HYDROData_Zone::Merge_UNKNOWN );
myBathymetryChoice->addItem( tr("MERGE_ZMIN"), HYDROData_Zone::Merge_ZMIN );
myBathymetryChoice->addItem( tr("MERGE_ZMAX"), HYDROData_Zone::Merge_ZMAX );
- QStringList aList = aZone->getAltitudes();
+ QStringList aList = aZone->getObjects();
for ( int i = 0; i < aList.length(); i++ )
{
myBathymetryChoice->addItem( aList.at( i ), HYDROData_Zone::Merge_Object );
}
myBathymetryChoice->setVisible( doShow );
- myBatimetryLabel->setVisible( doShow );
+ myBathymetryChoice->setEnabled( getMode() == HYDROData_CalculationCase::MANUAL );
+ myBathymetryLabel->setVisible( doShow );
}
void HYDROGUI_CalculationDlg::setObjectName( const QString& theName )
void HYDROGUI_CalculationDlg::includeGeomObjects( const QStringList& theObjects )
{
- moveItems( myAvailableGeomObjects, myGeomObjects, theObjects );
+ QList<QListWidgetItem*> aFoundItems;
+ foreach ( const QString& anObjName, theObjects ) {
+ // Hide the object in the available objects list
+ aFoundItems = myAvailableGeomObjects->findItems( anObjName, Qt::MatchExactly );
+ foreach ( QListWidgetItem* anItem, aFoundItems ) {
+ anItem->setHidden( true );
+ }
+
+ // Add the object to the list of included objects
+ Handle(HYDROData_Entity) anObject =
+ HYDROGUI_Tool::FindObjectByName( module(), anObjName );
+ myGeomObjects->addObject( HYDROGUI_ListModel::Object2Visible( anObject, true ) );
+ }
+
+ myPriorityWidget->setObjects( getGeometryObjects() );
}
void HYDROGUI_CalculationDlg::excludeGeomObjects( const QStringList& theObjects )
{
- moveItems( myGeomObjects, myAvailableGeomObjects, theObjects );
+ QList<QListWidgetItem*> aFoundItems;
+ foreach ( const QString& anObjName, theObjects ) {
+ // Set visible the object in the available objects list
+ aFoundItems = myAvailableGeomObjects->findItems( anObjName, Qt::MatchExactly );
+ foreach ( QListWidgetItem* anItem, aFoundItems ) {
+ anItem->setHidden( false );
+ }
+
+ // Remove the object from the list of included objects
+ myGeomObjects->removeObjectByName( anObjName );
+ }
+
+ myPriorityWidget->setObjects( getGeometryObjects() );
}
void HYDROGUI_CalculationDlg::setBoundary( const QString& theObjName )
myPolylineName->addItem( theObjects.at( i ), theObjectsEntries.at( i ) );
}
}
+
+void HYDROGUI_CalculationDlg::setLandCoverMapsNames( const QStringList& theObjects, const QStringList& theObjectsEntries )
+{
+ myLandCoverMapName->clear();
+
+ for ( int i = 0, n = theObjects.length(); i < n; ++i )
+ {
+ myLandCoverMapName->addItem( theObjects.at( i ), theObjectsEntries.at( i ) );
+ }
+}
+
+void HYDROGUI_CalculationDlg::setStricklerTableNames( const QStringList& theObjects, const QStringList& theObjectsEntries )
+{
+ myStricklerTableName->clear();
+
+ for ( int i = 0, n = theObjects.length(); i < n; ++i )
+ {
+ myStricklerTableName->addItem( theObjects.at( i ), theObjectsEntries.at( i ) );
+ }
+}
+
void HYDROGUI_CalculationDlg::setAllGeomObjects( const QStringList& theObjects, const QStringList& theObjectsEntries )
{
myAvailableGeomObjects->clear();
QStringList HYDROGUI_CalculationDlg::getSelectedGeomObjects() const
{
- return getSelected( myGeomObjects );
+ return myGeomObjects->getSelectedNames();
+}
+
+QStringList HYDROGUI_CalculationDlg::getAllGeomObjects() const
+{
+ return myGeomObjects->getAllNames();
}
QStringList HYDROGUI_CalculationDlg::getSelectedAvailableGeomObjects() const
myValidator->setEditedObject( theCase );
// Build the calculation case subtree
- module()->getDataModel()->buildCaseTree( myBrowser->root(), myEditedObject );
+ module()->getDataModel()->buildCaseTree( myBrowser->root(), myEditedObject);
myBrowser->updateTree();
myBrowser->openLevels();
myBrowser->adjustColumnsWidth();
myBrowser->setAutoUpdate( true );
myBrowser->setUpdateModified( true );
-
}
HYDROGUI_Zone* HYDROGUI_CalculationDlg::getCurrentZone() const
{
moveItems( myGroups, myAvailableGroups, theObjects );
}
+
+/**
+ Get creation mode.
+ @param theMode the mode
+*/
+int HYDROGUI_CalculationDlg::getMode() const
+{
+ return myModeButtons->checkedId();
+}
+
+/**
+ Set creation mode.
+ @param theMode the mode
+*/
+void HYDROGUI_CalculationDlg::setMode( int theMode )
+{
+ bool isBlocked = myModeButtons->blockSignals( true );
+ myModeButtons->button( theMode )->setChecked( true );
+ myModeButtons->blockSignals( isBlocked );
+
+ bool isAuto = ( theMode == HYDROData_CalculationCase::AUTOMATIC );
+
+ myGeomObjects->setOrderingEnabled( isAuto );
+ QWidget* aWidget = mySplitter->widget( 1 );
+ if ( aWidget ) {
+ aWidget->setVisible( isAuto );
+ }
+}
+
+/**
+ Enable/disable zones drag'n'drop and renaming.
+ @param theIsEnabled if true - zones drag'n'drop and renaming will be enabled
+*/
+void HYDROGUI_CalculationDlg::setEditZonesEnabled( const bool theIsEnabled )
+{
+ myBrowser->setReadOnly( !theIsEnabled );
+}
+
+/**
+ Get included geometry objects.
+ @return the list of geometry objects
+ */
+QList<Handle(HYDROData_Entity)> HYDROGUI_CalculationDlg::getGeometryObjects()
+{
+ QList<Handle(HYDROData_Entity)> anEntities = myGeomObjects->getObjects();
+ QList<Handle(HYDROData_Entity)> anObjects;
+
+ foreach ( Handle(HYDROData_Entity) anEntity, anEntities ) {
+ Handle(HYDROData_Object) anObj = Handle(HYDROData_Object)::DownCast( anEntity );
+ if ( anObj.IsNull() ) {
+ continue;
+ }
+
+ anObjects << anObj;
+ }
+
+ return anObjects;
+}
+
+/**
+ Get rules.
+ @return the list of rules
+ */
+HYDROData_ListOfRules HYDROGUI_CalculationDlg::getRules() const
+{
+ return myPriorityWidget->getRules();
+}
+
+/**
+ Set rules.
+ @param theRules the list of rules
+ */
+void HYDROGUI_CalculationDlg::setRules( const HYDROData_ListOfRules& theRules ) const
+{
+ myPriorityWidget->setRules( theRules );
+}
+
+/**
+ Slot called when objects order is changed.
+ */
+void HYDROGUI_CalculationDlg::onOrderChanged()
+{
+ bool isConfirmed = true;
+ emit orderChanged( isConfirmed );
+ if( isConfirmed )
+ myPriorityWidget->setObjects( getGeometryObjects() );
+ else
+ myGeomObjects->undoLastMove();
+}
+
+/**
+ Slot called when priority rule for geometry objects is changed.
+ */
+void HYDROGUI_CalculationDlg::onRuleChanged()
+{
+ bool isConfirmed = true;
+ emit ruleChanged( isConfirmed );
+ if( !isConfirmed )
+ myPriorityWidget->undoLastChange();
+}
+
+void HYDROGUI_CalculationDlg::setStricklerTable( const QString& theStricklerTableName, bool theBlockSignals )
+{
+ bool isBlocked;
+ if ( theBlockSignals )
+ isBlocked = myStricklerTableName->blockSignals( true );
+
+ myStricklerTableName->setCurrentIndex( myStricklerTableName->findText( theStricklerTableName ) );
+
+ if ( theBlockSignals )
+ myStricklerTableName->blockSignals( isBlocked );
+ else
+ emit StricklerTableSelected( theStricklerTableName );
+}
+
+void HYDROGUI_CalculationDlg::setLandCoverMap( const QString& theLandCoverMapName, bool theBlockSignals )
+{
+ bool isBlocked;
+ if ( theBlockSignals )
+ isBlocked = myLandCoverMapName->blockSignals( true );
+
+ myLandCoverMapName->setCurrentIndex( myLandCoverMapName->findText( theLandCoverMapName ) );
+
+ if ( theBlockSignals )
+ myLandCoverMapName->blockSignals( isBlocked );
+ else
+ emit landCoverMapSelected( theLandCoverMapName );
+}
