#include "HYDROGUI_Zone.h"
#include "HYDROGUI_OrderedListWidget.h"
#include "HYDROGUI_PriorityWidget.h"
+#include "HYDROGUI_PriorityTableModel.h"
#include <HYDROData_Document.h>
#include <HYDROData_Entity.h>
{
addPage( createObjectsPage() );
addPage( createGroupsPage() );
+ addPage( createLandCoversPage() );
addPage( createZonesPage() );
+ addPage( createLandCoverZonesPage() );
}
HYDROGUI_CalculationDlg::~HYDROGUI_CalculationDlg()
myObjectName->clear();
HYDROGUI_ListModel::Object2VisibleList anObject2VisibleList;
myGeomObjects->setObjects(anObject2VisibleList);
+ myLandCovers->setObjects(anObject2VisibleList);
myPolylineName->clear();
+ myStricklerTableName->clear();
myAvailableGeomObjects->clear();
+ myAvailableLandCovers->clear();
// Activate the automatic mode
setMode( HYDROData_CalculationCase::AUTOMATIC );
+ setLandCoverMode( HYDROData_CalculationCase::AUTOMATIC );
// Reset the priority widget state
- QList<Handle(HYDROData_Object)> anObjects;
+ QList<Handle(HYDROData_Entity)> anObjects;
myPriorityWidget->setObjects( anObjects );
+ myLandCoverPriorityWidget->setObjects( anObjects );
}
QWizardPage* HYDROGUI_CalculationDlg::createObjectsPage() {
connect( myGeomObjects, SIGNAL( orderChanged() ), SLOT( onOrderChanged() ) );
+ connect( myPriorityWidget, SIGNAL( ruleChanged() ), SLOT( onRuleChanged() ) );
+
return aPage;
}
return aPage;
}
+QWizardPage* HYDROGUI_CalculationDlg::createLandCoversPage() {
+ QWizardPage* aPage = new QWizardPage( mainFrame() );
+ QFrame* aFrame = new QFrame( aPage );
+
+ // Splitter
+ myLandCoverSplitter = new QSplitter(Qt::Vertical);
+
+ // Top of the page
+ QWidget* aTopContainer = new QWidget;
+
+ // Combo-box to choose Strickler table name
+ QLabel* aStricklerTableLabel = new QLabel( tr( "STRICKLER_TABLE" ), aPage );
+ myStricklerTableName = new QComboBox( aPage );
+ myStricklerTableName->setSizePolicy( QSizePolicy( QSizePolicy::Expanding, QSizePolicy::Fixed ) );
+ connect( myStricklerTableName, SIGNAL( activated( const QString & ) ),
+ SIGNAL( StricklerTableSelected( const QString & ) ) );
+
+ // Mode selector (auto/manual)
+ QGroupBox* aModeGroup = new QGroupBox( tr( "MODE" ) );
+
+ QRadioButton* aManualRB = new QRadioButton( tr( "MANUAL" ), mainFrame() );
+ QRadioButton* anAutoRB = new QRadioButton( tr( "AUTO" ), mainFrame() );
+
+ myLandCoverModeButtons = new QButtonGroup( mainFrame() );
+ myLandCoverModeButtons->addButton( anAutoRB, HYDROData_CalculationCase::AUTOMATIC );
+ myLandCoverModeButtons->addButton( aManualRB, HYDROData_CalculationCase::MANUAL );
+
+ QBoxLayout* aModeSelectorLayout = new QHBoxLayout;
+ aModeSelectorLayout->setMargin( 5 );
+ aModeSelectorLayout->setSpacing( 5 );
+ aModeSelectorLayout->addWidget( anAutoRB );
+ aModeSelectorLayout->addWidget( aManualRB );
+ aModeGroup->setLayout( aModeSelectorLayout );
+
+ // Available land covers
+ QLabel* aLandCoversLabel = new QLabel( tr( "CALCULATION_REFERENCE_LAND_COVERS" ) );
+ myAvailableLandCovers = new QListWidget( aPage );
+ myAvailableLandCovers->setSelectionMode( QListWidget::ExtendedSelection );
+ myAvailableLandCovers->setEditTriggers( QListWidget::NoEditTriggers );
+ myAvailableLandCovers->setViewMode( QListWidget::ListMode );
+ myAvailableLandCovers->setSortingEnabled( true );
+
+ // Included land covers
+ QLabel* anIncludedLabel = new QLabel( tr( "INCLUDED_LAND_COVERS" ) );
+ myLandCovers = new HYDROGUI_OrderedListWidget( aPage, 16 );
+ myLandCovers->setHiddenObjectsShown(true);
+ myLandCovers->setVisibilityIconShown(false);
+ myLandCovers->setContentsMargins(QMargins());
+
+ // Include/Exclude buttons
+ QFrame* aBtnsFrame = new QFrame;
+ QVBoxLayout* aBtnsLayout = new QVBoxLayout( aBtnsFrame );
+ aBtnsLayout->setMargin( 5 );
+ aBtnsLayout->setSpacing( 5 );
+ aBtnsFrame->setLayout( aBtnsLayout );
+ QPushButton* anAddBtn = new QPushButton( tr("INCLUDE"), aBtnsFrame );
+ QPushButton* aRemoveBtn = new QPushButton( tr("EXCLUDE"), aBtnsFrame );
+
+ // Fill the butons frame with two buttons
+ aBtnsLayout->addWidget( anAddBtn );
+ aBtnsLayout->addWidget( aRemoveBtn );
+ aBtnsLayout->addStretch( 1 );
+
+ // Land covers frame
+ QFrame* aLandCoversFrame = new QFrame( aPage );
+ aLandCoversFrame->setFrameStyle( QFrame::Panel | QFrame::Raised );
+ QGridLayout* aLandCoversLayout = new QGridLayout( aLandCoversFrame );
+ aLandCoversLayout->setMargin( 5 );
+ aLandCoversLayout->setSpacing( 5 );
+ aLandCoversFrame->setLayout( aLandCoversLayout );
+
+ // Fill the land covers frame with two lists, two labels and with buttons frame
+ aLandCoversLayout->addWidget( aLandCoversLabel, 0, 0, Qt::AlignHCenter );
+ aLandCoversLayout->addWidget( anIncludedLabel, 0, 2, Qt::AlignHCenter );
+ aLandCoversLayout->addWidget( myAvailableLandCovers, 1, 0 );
+ aLandCoversLayout->addWidget( aBtnsFrame, 1, 1, Qt::AlignHCenter );
+ aLandCoversLayout->addWidget( myLandCovers, 1, 2 );
+
+ // Fill the top layout of the page
+ QGridLayout* aTopLayout = new QGridLayout;
+ aTopLayout->setMargin( 5 );
+ aTopLayout->setSpacing( 5 );
+ aTopLayout->setVerticalSpacing( 10 );
+ aTopLayout->addWidget( aStricklerTableLabel, 0, 0, Qt::AlignHCenter );
+ aTopLayout->addWidget( myStricklerTableName, 0, 1 );
+ aTopLayout->addWidget( aModeGroup, 1, 0, 1, 2 );
+ aTopLayout->addWidget( aLandCoversFrame, 2, 0, 1, 2 );
+
+ aTopContainer->setLayout( aTopLayout );
+
+ // Add the top of the page to the splitter
+ myLandCoverSplitter->insertWidget(0, aTopContainer);
+ myLandCoverSplitter->setStretchFactor(0, 2);
+
+ // Bottom of the page
+ myLandCoverPriorityWidget = new HYDROGUI_PriorityWidget( mainFrame() );
+ HYDROGUI_PriorityTableModel* aModel =
+ dynamic_cast<HYDROGUI_PriorityTableModel*>( myLandCoverPriorityWidget->getTable()->model() );
+ if ( aModel )
+ aModel->setColumnCount( 3 );
+
+ QGroupBox* aPriorityGroup = new QGroupBox( tr( "PRIORITY" ) );
+ QBoxLayout* aPriorityLayout = new QHBoxLayout;
+ aPriorityLayout->setMargin( 5 );
+ aPriorityLayout->setSpacing( 5 );
+ aPriorityLayout->addWidget( myLandCoverPriorityWidget );
+ aPriorityGroup->setLayout( aPriorityLayout );
+
+ // Add the bottom of the page to the splitter
+ myLandCoverSplitter->insertWidget(1, aPriorityGroup);
+ myLandCoverSplitter->setStretchFactor(1, 1);
+
+ // Page layout
+ QVBoxLayout* aPageLayout = new QVBoxLayout;
+ aPageLayout->setMargin( 5 );
+ aPageLayout->setSpacing( 5 );
+ aPageLayout->addWidget( myLandCoverSplitter );
+
+ aPage->setLayout( aPageLayout );
+
+ // Create selector
+ if ( module() ) {
+ HYDROGUI_ListSelector* aListSelector =
+ new HYDROGUI_ListSelector( myLandCovers, module()->getApp()->selectionMgr() );
+ aListSelector->setAutoBlock( true );
+ }
+
+ // Connections
+ connect( myLandCoverModeButtons, SIGNAL( buttonClicked( int ) ), SIGNAL( changeLandCoverMode( int ) ) );
+ connect( anAddBtn, SIGNAL( clicked() ), SIGNAL( addLandCovers() ) );
+ connect( aRemoveBtn, SIGNAL( clicked() ), SIGNAL( removeLandCovers() ) );
+
+ connect( myLandCovers, SIGNAL( orderChanged() ), SLOT( onOrderLandCoverChanged() ) );
+
+ connect( myLandCoverPriorityWidget, SIGNAL( ruleChanged() ), SLOT( onLandCoverRuleChanged() ) );
+
+ return aPage;
+}
+
QWizardPage* HYDROGUI_CalculationDlg::createZonesPage() {
QWizardPage* aPage = new QWizardPage( mainFrame() );
QFrame* aFrame = new QFrame( aPage );
QGridLayout* aLayout = new QGridLayout( aPage );
+
+ QLabel* aResultsOnGeomObjectsLabel = new QLabel( tr( "RESULTS_ON_GEOMETRY_OBJECTS" ), aFrame );
myBrowser = new HYDROGUI_DataBrowser( module(), NULL, aPage );
myBrowser->setAutoOpenLevel( 3 );
aLayout->setMargin( 5 );
aLayout->setSpacing( 5 );
- aLayout->addWidget( myBrowser, 0, 0, 1, 2 );
+ aLayout->addWidget( aResultsOnGeomObjectsLabel, 0, 0 );
+ aLayout->addWidget( myBrowser, 1, 0, 1, 2 );
myBathymetryLabel = new QLabel( tr( "BATHYMETRY" ), aFrame );
myBathymetryChoice = new QComboBox( aFrame );
myBathymetryChoice->setVisible( false );
myBathymetryLabel->setVisible( false );
- aLayout->addWidget( myBathymetryLabel, 1, 0 );
- aLayout->addWidget( myBathymetryChoice, 1, 1 );
+ aLayout->addWidget( myBathymetryLabel, 2, 0 );
+ aLayout->addWidget( myBathymetryChoice, 2, 1 );
aPage->setLayout( aLayout );
return aPage;
}
+QWizardPage* HYDROGUI_CalculationDlg::createLandCoverZonesPage() {
+ QWizardPage* aPage = new QWizardPage( mainFrame() );
+ QFrame* aFrame = new QFrame( aPage );
+
+ QGridLayout* aLayout = new QGridLayout( aPage );
+
+ QLabel* aResultsOnLandCoversLabel = new QLabel( tr( "RESULTS_ON_LAND_COVERS" ), aFrame );
+
+ myLandCoverBrowser = new HYDROGUI_DataBrowser( module(), NULL, aPage, true );
+ myLandCoverBrowser->setAutoOpenLevel( 3 );
+ aLayout->setMargin( 5 );
+ aLayout->setSpacing( 5 );
+
+ aLayout->addWidget( aResultsOnLandCoversLabel, 0, 0 );
+ aLayout->addWidget( myLandCoverBrowser, 1, 0, 1, 2 );
+
+ myStricklerTypeLabel = new QLabel( tr( "STRICKLER_TYPE" ), aFrame );
+ myStricklerTypeChoice = new QComboBox( aFrame );
+
+ myStricklerTypeLabel->setVisible( false );
+ myStricklerTypeChoice->setVisible( false );
+
+ aLayout->addWidget( myStricklerTypeLabel, 2, 0 );
+ aLayout->addWidget( myStricklerTypeChoice, 2, 1 );
+
+ aPage->setLayout( aLayout );
+
+ // Connections
+ connect( myLandCoverBrowser, SIGNAL( dataChanged() ), SLOT( onDataLandCoverChanged() ) );
+ connect( myLandCoverBrowser, SIGNAL( clicked( SUIT_DataObject* ) ), SIGNAL( clickedInZonesBrowser( SUIT_DataObject* ) ) );
+ connect( myLandCoverBrowser, SIGNAL( clicked( SUIT_DataObject* ) ), SLOT( onLandCoverZoneSelected( SUIT_DataObject* ) ) );
+ connect( myStricklerTypeChoice, SIGNAL( activated( int ) ), SLOT( onMergeStricklerTypeSelected( int ) ) );
+ connect( myLandCoverBrowser,
+ SIGNAL( dropped( const QList<SUIT_DataObject*>&, SUIT_DataObject*, int, Qt::DropAction ) ),
+ SLOT( onLandCoverZonesDropped( const QList<SUIT_DataObject*>&, SUIT_DataObject*, int, Qt::DropAction ) ) );
+ connect( myLandCoverBrowser, SIGNAL( newRegion() ), this, SLOT( OnNewLandCoverRegion() ) );
+
+ return aPage;
+}
+
bool HYDROGUI_CalculationDlg::acceptCurrent() const
{
HYDROGUI_Region* aRegion = dynamic_cast<HYDROGUI_Region*>(theTargetParent);
if ( aRegion )
{
- emit moveZones( theTargetParent, aZonesList );
+ emit moveZones( theTargetParent, aZonesList, false );
}
}
}
emit createRegion( myBrowser->getSelected() );
}
+void HYDROGUI_CalculationDlg::OnNewLandCoverRegion()
+{
+ emit createLandCoverRegion( myLandCoverBrowser->getSelected() );
+}
+
void HYDROGUI_CalculationDlg::onMergeTypeSelected( int theIndex )
{
int aType = myBathymetryChoice->itemData( theIndex ).toInt();
myBathymetryChoice->addItem( tr("MERGE_UNKNOWN"), HYDROData_Zone::Merge_UNKNOWN );
myBathymetryChoice->addItem( tr("MERGE_ZMIN"), HYDROData_Zone::Merge_ZMIN );
myBathymetryChoice->addItem( tr("MERGE_ZMAX"), HYDROData_Zone::Merge_ZMAX );
- QStringList aList = aZone->getAltitudes();
+ QStringList aList = aZone->getObjects();
for ( int i = 0; i < aList.length(); i++ )
{
myBathymetryChoice->addItem( aList.at( i ), HYDROData_Zone::Merge_Object );
myBathymetryLabel->setVisible( doShow );
}
+void HYDROGUI_CalculationDlg::onLandCoverZoneSelected( SUIT_DataObject* theObject )
+{
+ bool doShow = false;
+ HYDROGUI_Zone* aZone = dynamic_cast<HYDROGUI_Zone*>( theObject );
+ if ( aZone )
+ {
+ doShow = aZone->isMergingNeed();
+ }
+
+ if ( doShow )
+ {
+ // Fill the merge type combo box
+ bool prevBlock = myStricklerTypeChoice->blockSignals( true );
+ myCurrentZone = aZone;
+ myStricklerTypeChoice->clear();
+ myStricklerTypeChoice->addItem( tr("MERGE_UNKNOWN"), HYDROData_Zone::Merge_UNKNOWN );
+ QStringList aList = aZone->getObjects();
+ for ( int i = 0; i < aList.length(); i++ )
+ {
+ myStricklerTypeChoice->addItem( aList.at( i ), HYDROData_Zone::Merge_Object );
+ }
+ // Select the current choice if any
+ int aCurIndex = 0;
+ switch ( aZone->getMergeType() )
+ {
+ case HYDROData_Zone::Merge_Object:
+ aCurIndex = 1 + aList.indexOf( aZone->text( HYDROGUI_DataObject::AltitudeObjId ) );
+ break;
+ default:
+ aCurIndex = 0; // Select unknown by default
+ }
+ myStricklerTypeChoice->setCurrentIndex( aCurIndex );
+ myStricklerTypeChoice->blockSignals( prevBlock );
+ }
+
+ myStricklerTypeChoice->setVisible( doShow );
+ myStricklerTypeChoice->setEnabled( getLandCoverMode() == HYDROData_CalculationCase::MANUAL );
+ myStricklerTypeLabel->setVisible( doShow );
+}
+
+void HYDROGUI_CalculationDlg::onMergeStricklerTypeSelected( int theIndex )
+{
+ int aType = myStricklerTypeChoice->itemData( theIndex ).toInt();
+ QString aText = myStricklerTypeChoice->itemText( theIndex );
+ emit setMergeStricklerType( aType, aText );
+}
+
+void HYDROGUI_CalculationDlg::onLandCoverZonesDropped( const QList<SUIT_DataObject*>& theList,
+ SUIT_DataObject* theTargetParent, int theTargetRow, Qt::DropAction theDropAction )
+{
+ QList<SUIT_DataObject*> aZonesList;
+ HYDROGUI_Zone* aZone;
+ // Get a list of dropped land cover zones
+ for ( int i = 0; i < theList.length(); i++ )
+ {
+ aZone = dynamic_cast<HYDROGUI_Zone*>( theList.at( i ) );
+ if ( aZone )
+ {
+ aZonesList.append( aZone );
+ }
+ }
+ if ( aZonesList.length() > 0 )
+ {
+ // Get the target region
+ HYDROGUI_NamedObject* aRegionsRoot = dynamic_cast<HYDROGUI_NamedObject*>(theTargetParent);
+ if ( aRegionsRoot )
+ {
+ // Create a new region
+ emit createLandCoverRegion( aZonesList );
+ }
+ else
+ {
+ HYDROGUI_Region* aRegion = dynamic_cast<HYDROGUI_Region*>(theTargetParent);
+ if ( aRegion )
+ {
+ emit moveZones( theTargetParent, aZonesList, true );
+ }
+ }
+ }
+}
+
void HYDROGUI_CalculationDlg::setObjectName( const QString& theName )
{
myObjectName->setText( theName );
void HYDROGUI_CalculationDlg::includeGeomObjects( const QStringList& theObjects )
{
- HYDROGUI_ListModel::Object2VisibleList anObjectsToInclude;
QList<QListWidgetItem*> aFoundItems;
foreach ( const QString& anObjName, theObjects ) {
// Hide the object in the available objects list
myPolylineName->addItem( theObjects.at( i ), theObjectsEntries.at( i ) );
}
}
+
+void HYDROGUI_CalculationDlg::setStricklerTableNames( const QStringList& theObjects, const QStringList& theObjectsEntries )
+{
+ myStricklerTableName->clear();
+
+ for ( int i = 0, n = theObjects.length(); i < n; ++i )
+ {
+ myStricklerTableName->addItem( theObjects.at( i ), theObjectsEntries.at( i ) );
+ }
+}
+
void HYDROGUI_CalculationDlg::setAllGeomObjects( const QStringList& theObjects, const QStringList& theObjectsEntries )
{
myAvailableGeomObjects->clear();
}
}
+void HYDROGUI_CalculationDlg::setAllLandCovers( const QStringList& theObjects, const QStringList& theObjectsEntries )
+{
+ myAvailableLandCovers->clear();
+
+ for ( int i = 0, n = theObjects.length(); i < n; ++i )
+ {
+ QString anObjName = theObjects.at( i );
+
+ QListWidgetItem* aListItem = new QListWidgetItem( anObjName, myAvailableLandCovers );
+ aListItem->setFlags( Qt::ItemIsEnabled | Qt::ItemIsSelectable );
+ aListItem->setData( Qt::UserRole, theObjectsEntries.at( i ) );
+ }
+}
+
QStringList getSelected( QListWidget* theWidget )
{
QStringList aResList;
return myGeomObjects->getSelectedNames();
}
+QStringList HYDROGUI_CalculationDlg::getSelectedLandCovers() const
+{
+ return myLandCovers->getSelectedNames();
+}
+
QStringList HYDROGUI_CalculationDlg::getAllGeomObjects() const
{
return myGeomObjects->getAllNames();
}
+QStringList HYDROGUI_CalculationDlg::getAllLandCovers() const
+{
+ return myLandCovers->getAllNames();
+}
+
QStringList HYDROGUI_CalculationDlg::getSelectedAvailableGeomObjects() const
{
return getSelected( myAvailableGeomObjects );
}
+QStringList HYDROGUI_CalculationDlg::getSelectedAvailableLandCovers() const
+{
+ return getSelected( myAvailableLandCovers );
+}
+
void HYDROGUI_CalculationDlg::setEditedObject( const Handle(HYDROData_CalculationCase) theCase )
{
myEditedObject = theCase;
myValidator->setEditedObject( theCase );
// Build the calculation case subtree
- module()->getDataModel()->buildCaseTree( myBrowser->root(), myEditedObject );
+ module()->getDataModel()->buildCaseTree( myBrowser->root(), myEditedObject, false );
myBrowser->updateTree();
myBrowser->openLevels();
myBrowser->adjustColumnsWidth();
myBrowser->setAutoUpdate( true );
myBrowser->setUpdateModified( true );
+
+ // Build the calculation case subtree for Land Cover regions
+ module()->getDataModel()->buildCaseTree( myLandCoverBrowser->root(), myEditedObject, true );
+
+ myLandCoverBrowser->updateTree();
+ myLandCoverBrowser->openLevels();
+ myLandCoverBrowser->adjustColumnsWidth();
+ myLandCoverBrowser->setAutoUpdate( true );
+ myLandCoverBrowser->setUpdateModified( true );
}
HYDROGUI_Zone* HYDROGUI_CalculationDlg::getCurrentZone() const
{
SUIT_DataObject* aRoot = myBrowser->root();
module()->getDataModel()->updateObjectTree( myEditedObject );
- module()->getDataModel()->buildCaseTree( aRoot, myEditedObject );
+ module()->getDataModel()->buildCaseTree( aRoot, myEditedObject, false );
myBrowser->updateTree( aRoot );
}
void HYDROGUI_CalculationDlg::onDataChanged()
{
SUIT_DataObject* aRoot = myBrowser->root();
- module()->getDataModel()->buildCaseTree( aRoot, myEditedObject );
+ module()->getDataModel()->buildCaseTree( aRoot, myEditedObject, false );
myBrowser->updateTree( aRoot );
}
}
}
+/**
+ Get creation mode for land covers panel.
+ @param theMode the mode
+*/
+int HYDROGUI_CalculationDlg::getLandCoverMode() const
+{
+ return myLandCoverModeButtons->checkedId();
+}
+
+/**
+ Set creation mode for land cover panel.
+ @param theMode the mode
+*/
+void HYDROGUI_CalculationDlg::setLandCoverMode( int theMode )
+{
+ bool isBlocked = myLandCoverModeButtons->blockSignals( true );
+ myLandCoverModeButtons->button( theMode )->setChecked( true );
+ myLandCoverModeButtons->blockSignals( isBlocked );
+
+ bool isAuto = ( theMode == HYDROData_CalculationCase::AUTOMATIC );
+
+ myLandCovers->setOrderingEnabled( isAuto );
+ QWidget* aWidget = myLandCoverSplitter->widget( 1 );
+ if ( aWidget ) {
+ aWidget->setVisible( isAuto );
+ }
+}
+
/**
Enable/disable zones drag'n'drop and renaming.
@param theIsEnabled if true - zones drag'n'drop and renaming will be enabled
myBrowser->setReadOnly( !theIsEnabled );
}
+/**
+ Enable/disable land covers drag'n'drop and renaming.
+ @param theIsEnabled if true - land covers drag'n'drop and renaming will be enabled
+*/
+void HYDROGUI_CalculationDlg::setEditLandCoverZonesEnabled( const bool theIsEnabled )
+{
+ myLandCoverBrowser->setReadOnly( !theIsEnabled );
+}
+
/**
Get included geometry objects.
@return the list of geometry objects
*/
-QList<Handle(HYDROData_Object)> HYDROGUI_CalculationDlg::getGeometryObjects()
+QList<Handle(HYDROData_Entity)> HYDROGUI_CalculationDlg::getGeometryObjects()
{
QList<Handle(HYDROData_Entity)> anEntities = myGeomObjects->getObjects();
- QList<Handle(HYDROData_Object)> anObjects;
+ QList<Handle(HYDROData_Entity)> anObjects;
foreach ( Handle(HYDROData_Entity) anEntity, anEntities ) {
Handle(HYDROData_Object) anObj = Handle(HYDROData_Object)::DownCast( anEntity );
return anObjects;
}
+/**
+ Get included land covers.
+ @return the list of land covers
+ */
+QList<Handle(HYDROData_Entity)> HYDROGUI_CalculationDlg::getLandCovers()
+{
+ QList<Handle(HYDROData_Entity)> anEntities = myLandCovers->getObjects();
+ QList<Handle(HYDROData_Entity)> aLandCovers;
+
+ foreach ( Handle(HYDROData_Entity) anEntity, anEntities ) {
+ Handle(HYDROData_LandCover) aLandCover = Handle(HYDROData_LandCover)::DownCast( anEntity );
+ if ( aLandCover.IsNull() ) {
+ continue;
+ }
+
+ aLandCovers << aLandCover;
+ }
+
+ return aLandCovers;
+}
+
/**
Get rules.
@return the list of rules
myPriorityWidget->setRules( theRules );
}
+/**
+ Get rules defined for land covers.
+ @return the list of rules
+ */
+HYDROData_ListOfRules HYDROGUI_CalculationDlg::getLandCoverRules() const
+{
+ return myLandCoverPriorityWidget->getRules();
+}
+
+/**
+ Set rules for land covers.
+ @param theRules the list of rules
+ */
+void HYDROGUI_CalculationDlg::setLandCoverRules( const HYDROData_ListOfRules& theRules ) const
+{
+ myLandCoverPriorityWidget->setRules( theRules );
+}
+
/**
Slot called when objects order is changed.
*/
else
myGeomObjects->undoLastMove();
}
+
+/**
+ Slot called when priority rule for geometry objects is changed.
+ */
+void HYDROGUI_CalculationDlg::onRuleChanged()
+{
+ bool isConfirmed = true;
+ emit ruleChanged( isConfirmed );
+ if( !isConfirmed )
+ myPriorityWidget->undoLastChange();
+}
+
+void HYDROGUI_CalculationDlg::setStricklerTable( const QString& theStricklerTableName, bool theBlockSignals )
+{
+ bool isBlocked;
+ if ( theBlockSignals )
+ isBlocked = myStricklerTableName->blockSignals( true );
+
+ myStricklerTableName->setCurrentIndex( myStricklerTableName->findText( theStricklerTableName ) );
+
+ if ( theBlockSignals )
+ myStricklerTableName->blockSignals( isBlocked );
+ else
+ emit StricklerTableSelected( theStricklerTableName );
+}
+
+void HYDROGUI_CalculationDlg::includeLandCovers( const QStringList& theLandCovers, bool theReset )
+{
+ if ( theReset )
+ {
+ HYDROGUI_ListModel::Object2VisibleList anObject2VisibleList;
+ myLandCovers->setObjects(anObject2VisibleList);
+ }
+
+ QList<QListWidgetItem*> aFoundItems;
+ foreach ( const QString& anObjName, theLandCovers ) {
+ // Hide the land cover in the available land covers list
+ aFoundItems = myAvailableLandCovers->findItems( anObjName, Qt::MatchExactly );
+ foreach ( QListWidgetItem* anItem, aFoundItems ) {
+ anItem->setHidden( true );
+ }
+
+ // Add the land cover to the list of included objects
+ Handle(HYDROData_Entity) anObject =
+ HYDROGUI_Tool::FindObjectByName( module(), anObjName );
+ myLandCovers->addObject( HYDROGUI_ListModel::Object2Visible( anObject, true ) );
+ }
+
+ myLandCoverPriorityWidget->setObjects( getLandCovers() );
+}
+
+void HYDROGUI_CalculationDlg::excludeLandCovers( const QStringList& theLandCovers )
+{
+ QList<QListWidgetItem*> aFoundItems;
+ foreach ( const QString& anObjName, theLandCovers ) {
+ // Set visible the land cover in the available objects list
+ aFoundItems = myAvailableLandCovers->findItems( anObjName, Qt::MatchExactly );
+ foreach ( QListWidgetItem* anItem, aFoundItems ) {
+ anItem->setHidden( false );
+ }
+
+ // Remove the land cover from the list of included objects
+ myLandCovers->removeObjectByName( anObjName );
+ }
+
+ myLandCoverPriorityWidget->setObjects( getLandCovers() );
+}
+
+void HYDROGUI_CalculationDlg::refreshLandCoverZonesBrowser()
+{
+ SUIT_DataObject* aRoot = myLandCoverBrowser->root();
+ module()->getDataModel()->updateObjectTree( myEditedObject );
+ module()->getDataModel()->buildCaseTree( aRoot, myEditedObject, true );
+ myLandCoverBrowser->updateTree( aRoot );
+}
+
+/**
+ Slot called when zones created on land covers are changed.
+ */
+void HYDROGUI_CalculationDlg::onDataLandCoverChanged()
+{
+ SUIT_DataObject* aRoot = myLandCoverBrowser->root();
+ module()->getDataModel()->buildCaseTree( aRoot, myEditedObject, true );
+ myLandCoverBrowser->updateTree( aRoot );
+}
+
+/**
+ Slot called when land covers order is changed.
+ */
+void HYDROGUI_CalculationDlg::onOrderLandCoverChanged()
+{
+ bool isConfirmed = true;
+ emit orderLandCoverChanged( isConfirmed );
+ if( isConfirmed )
+ myLandCoverPriorityWidget->setObjects( getLandCovers() );
+ else
+ myLandCovers->undoLastMove();
+}
+
+/**
+ Slot called when priority rule for land covers is changed.
+ */
+void HYDROGUI_CalculationDlg::onLandCoverRuleChanged()
+{
+ bool isConfirmed = true;
+ emit ruleLandCoverChanged( isConfirmed );
+ if( !isConfirmed )
+ myLandCoverPriorityWidget->undoLastChange();
+}