#include <GeomAPI_Interpolate.hxx>
#include <Geom_BSplineCurve.hxx>
-#include <TopTools_Array1OfShape.hxx>
+#include <TopTools_HArray1OfShape.hxx>
#include <SortTools_QuickSortOfReal.hxx>
HYDROData_Stream::HYDROData_Stream()
-: HYDROData_NaturalObject()
+: HYDROData_NaturalObject( Geom_3d )
{
}
if ( theHydAxis.IsNull() || theProfiles.Length() < 2 )
return false;
- gp_Pnt aPrevFirstPoint, aPrevLastPoint;
Handle(TColgp_HArray1OfPnt) anArrayOfFPnt = new TColgp_HArray1OfPnt(1, theProfiles.Length());
Handle(TColgp_HArray1OfPnt) anArrayOfLPnt = new TColgp_HArray1OfPnt(1, theProfiles.Length());
- TopTools_Array1OfShape anArrOfProfiles(1, theProfiles.Length());
- TopTools_Array1OfShape anArrOf2DProfiles(1, theProfiles.Length());
+ Handle(TopTools_HArray1OfShape) anArrOfProfiles = new TopTools_HArray1OfShape(1, theProfiles.Length());
+ Handle(TopTools_HArray1OfShape) anArrOf2DProfiles = new TopTools_HArray1OfShape(1, theProfiles.Length());
// Pre-processing
HYDROData_SequenceOfObjects::Iterator anIter( theProfiles );
if ( !aProfile->GetLeftPoint( aPnt1, false ) || !aProfile->GetRightPoint( aPnt2, false ) )
continue;
- anArrOfProfiles.SetValue(i,aProfile->GetShape3D());//aProfile->GetTopShape();
- anArrOf2DProfiles.SetValue(i,aProfile->GetTopShape());
+ anArrOfProfiles->SetValue(i,aProfile->GetShape3D());//aProfile->GetTopShape();
+ anArrOf2DProfiles->SetValue(i,aProfile->GetTopShape());
- gp_Pnt aCurFirstPoint( aPnt1.X(), aPnt1.Y(), 0 ), aCurFP;
- gp_Pnt aCurLastPoint( aPnt2.X(), aPnt2.Y(), 0 ), aCurLP;
+ gp_Pnt aCurFP, aCurLP;
TopoDS_Vertex aV1, aV2;
TopExp::Vertices(TopoDS::Wire(aProf3d), aV1, aV2);
gp_Pnt aP1 = BRep_Tool::Pnt(aV1);
anArrayOfLPnt->SetValue(i,aCurLP);
}
- // Construct of the 3D presentation
- Handle(Geom_BSplineCurve) aBSpline = buildInterpolationCurve (anArrayOfFPnt);
- if(aBSpline.IsNull())
- return false;
-
- TopoDS_Edge anEdgLeft, anEdgRight;
-
- BRepBuilderAPI_MakeEdge aMakeEdge(aBSpline);
- if(aMakeEdge.IsDone())
- anEdgLeft = aMakeEdge.Edge();
-
- if(anEdgLeft.IsNull())
- return false;
-
- aBSpline.Nullify();
- aBSpline = buildInterpolationCurve (anArrayOfLPnt);
- if(aBSpline.IsNull())
- return false;
-
- aMakeEdge.Init(aBSpline);
- if(aMakeEdge.IsDone())
- anEdgRight = aMakeEdge.Edge();
-
- if(anEdgRight.IsNull())
- return false;
-
- BRep_Builder aBB;
- TopoDS_Compound aCmp;
- aBB.MakeCompound(aCmp);
- anIter.Init( theProfiles );
- for (int i=1 ; i < anArrOfProfiles.Length() +1; i++ )
- aBB.Add(aCmp, anArrOfProfiles.Value(i));
-
- aBB.Add(aCmp,anEdgLeft);
- aBB.Add(aCmp,anEdgRight);
- BRepCheck_Analyzer aCh(aCmp);
- if(aCh.IsValid())
- thePrs.myPrs3D = aCmp;
-#ifdef DEB_UPDATE
- else {
- BRepTools::Write(aCmp, "str3d.brep");
- thePrs.myPrs3D = aCmp;
- }
-#endif
-
- // Construct the top presentation
- for(int i=1;i<= anArrayOfLPnt->Length();i++) {
- gp_Pnt aPnt = anArrayOfFPnt->Value(i);
- aPnt.SetZ(.0); // make 2d
- anArrayOfFPnt->SetValue(i, aPnt);
- aPnt = anArrayOfLPnt->Value(i);
- aPnt.SetZ(.0);
- anArrayOfLPnt->SetValue(i, aPnt);
- }
-
- aBSpline.Nullify();
- aBSpline = buildInterpolationCurve (anArrayOfFPnt);
- if(aBSpline.IsNull())
- return false;
-
- aMakeEdge.Init(aBSpline);
- if(aMakeEdge.IsDone())
- anEdgLeft = aMakeEdge.Edge();
-
- aBSpline.Nullify();
- aBSpline = buildInterpolationCurve (anArrayOfLPnt);
- if(aBSpline.IsNull())
- return false;
-
- aMakeEdge.Init(aBSpline);
- if(aMakeEdge.IsDone())
- anEdgRight = aMakeEdge.Edge();
- if(anEdgRight.IsNull())
- return false;
-
- BRepBuilderAPI_MakeEdge aMakeEdge2(anArrayOfFPnt->Value(1),anArrayOfLPnt->Value(1));
- TopoDS_Edge aBotEdge, aTopEdge;
- if(aMakeEdge2.IsDone())
- aBotEdge = aMakeEdge2.Edge();
-
- BRepBuilderAPI_MakeEdge aMakeEdge3(anArrayOfFPnt->Value(anArrayOfFPnt->Length()),anArrayOfLPnt->Value(anArrayOfLPnt->Length()));
- if(aMakeEdge3.IsDone())
- aTopEdge = aMakeEdge3.Edge();
-
- // Make wire for 2D presentation with updating of corresponding edges
- BRepBuilderAPI_MakeWire aMakeWire;
-
- aMakeWire.Add( aBotEdge );
- thePrs.myInlet = aMakeWire.Edge();
-
- aMakeWire.Add( anEdgLeft );
- thePrs.myLeftBank = aMakeWire.Edge();
-
- aMakeWire.Add( aTopEdge );
- thePrs.myOutlet = aMakeWire.Edge();
-
- aMakeWire.Add( anEdgRight );
- thePrs.myRightBank = aMakeWire.Edge();
-
- TopoDS_Wire aSectProfileWire;
- if(aMakeWire.IsDone())
- aSectProfileWire = aMakeWire.Wire();
-
- BRepBuilderAPI_MakeFace aMakeFace( aSectProfileWire, Standard_True );
- TopoDS_Face aFace;
- aMakeFace.Build();
- if( aMakeFace.IsDone() )
- aFace = aMakeFace.Face();
-
- aCmp.Nullify();
- aBB.MakeCompound(aCmp);
- aBB.Add(aCmp,aFace);
- for(int i=1;i <= anArrOf2DProfiles.Length(); i++)
- aBB.Add(aCmp,anArrOf2DProfiles.Value(i));
-
- aCh.Init(aCmp);
- if(aCh.IsValid())
- thePrs.myPrs2D = aCmp;
-#ifdef DEB_UPDATE
- else {
- BRepTools::Write(aCmp, "str2d.brep");
- thePrs.myPrs2D = aCmp;
- }
-#endif
-
- return true;
+ return CreatePresentations( anArrayOfFPnt, anArrayOfLPnt, anArrOfProfiles, anArrOf2DProfiles, thePrs );
}
void HYDROData_Stream::UpdatePrs()
return true;
}
-TopoDS_Shape getShapeFromGroup( const HYDROData_SequenceOfObjects& theGroups,
- const int theGroupId )
-{
- TopoDS_Shape aResShape;
- if ( theGroups.Length() != 4 )
- return aResShape;
-
- Handle(HYDROData_ShapesGroup) aGroup =
- Handle(HYDROData_ShapesGroup)::DownCast( theGroups.Value( theGroupId ) );
- if ( aGroup.IsNull() )
- return aResShape;
-
- TopTools_SequenceOfShape aGroupShapes;
- aGroup->GetShapes( aGroupShapes );
-
- if ( !aGroupShapes.IsEmpty() )
- aResShape = aGroupShapes.First();
-
- return aResShape;
-}
-
TopoDS_Shape HYDROData_Stream::GetLeftShape() const
{
HYDROData_SequenceOfObjects aGroups = GetGroups();
- return getShapeFromGroup( aGroups, 1 );
+ return HYDROData_Tool::getFirstShapeFromGroup( aGroups, 1);
}
TopoDS_Shape HYDROData_Stream::GetRightShape() const
{
HYDROData_SequenceOfObjects aGroups = GetGroups();
- return getShapeFromGroup( aGroups, 2 );
+ return HYDROData_Tool::getFirstShapeFromGroup( aGroups, 2);
}
TopoDS_Shape HYDROData_Stream::GetInletShape() const
{
HYDROData_SequenceOfObjects aGroups = GetGroups();
- return getShapeFromGroup( aGroups, 3 );
+ return HYDROData_Tool::getFirstShapeFromGroup( aGroups, 3);
}
TopoDS_Shape HYDROData_Stream::GetOutletShape() const
{
HYDROData_SequenceOfObjects aGroups = GetGroups();
- return getShapeFromGroup( aGroups, 4 );
+ return HYDROData_Tool::getFirstShapeFromGroup( aGroups, 4);
}
QColor HYDROData_Stream::getDefaultFillingColor() const
updateProfilesOrder();
// Indicate model of the need to update the stream presentation
- SetToUpdate( true );
+ Changed( Geom_3d );
return true;
}
RemoveProfiles();
// Indicate model of the need to update the stream presentation
- SetToUpdate( true );
+ Changed( Geom_3d );
}
bool HYDROData_Stream::HasIntersection( const Handle(HYDROData_Profile)& theProfile,
insertProfileInToOrder( theProfile, aProfileIndex );
// Indicate model of the need to update the stream presentation
- SetToUpdate( true );
+ Changed( Geom_3d );
return true;
}
SetReferenceObjects( theProfiles, DataTag_Profile );
if ( anIsToUpdate )
- SetToUpdate( true );
+ Changed( Geom_3d );
}
return true;
removeParameter( aProfileIndex );
// Indicate model of the need to update the stream presentation
- SetToUpdate( true );
+ Changed( Geom_3d );
return true;
}
void HYDROData_Stream::RemoveProfiles()
{
- bool anIsToUpdate = IsMustBeUpdated() || NbReferenceObjects( DataTag_Profile ) > 0;
-
ClearReferenceObjects( DataTag_Profile );
// Remove the parameters array
removeParametersArray();
// Indicate model of the need to update the stream presentation
- SetToUpdate( anIsToUpdate );
+ Changed( Geom_3d );
}
void HYDROData_Stream::insertProfileInToOrder( const Handle(HYDROData_Profile)& theProfile,
return isOK;
}
-void HYDROData_Stream::CopyTo( const Handle(HYDROData_Entity)& theDestination ) const
+void HYDROData_Stream::CopyTo( const Handle(HYDROData_Entity)& theDestination,
+ bool isGenerateNewName ) const
{
// Get the document
Handle(HYDROData_Document) aDocument = HYDROData_Document::Document( myLab );
}
// Call base method
- HYDROData_Entity::CopyTo( theDestination );
+ HYDROData_Entity::CopyTo( theDestination, isGenerateNewName );
Handle(HYDROData_Stream) aStreamCopy =
Handle(HYDROData_Stream)::DownCast( theDestination );
}
}
}
+}
+
+bool HYDROData_Stream::CreatePresentations( const Handle(TColgp_HArray1OfPnt) theArrayOfFPnt,
+ const Handle(TColgp_HArray1OfPnt) theArrayOfLPnt,
+ const Handle(TopTools_HArray1OfShape) theArrOfProfiles,
+ const Handle(TopTools_HArray1OfShape) theArrOf2DProfiles,
+ PrsDefinition& thePrs )
+{
+ if ( theArrayOfFPnt.IsNull() || theArrayOfLPnt.IsNull() || theArrOfProfiles.IsNull() ) {
+ return false;
+ }
+
+ if ( theArrayOfFPnt->Length() != theArrayOfLPnt->Length() ) {
+ return false;
+ }
+
+ // Construct of the 3D presentation
+ Handle(Geom_BSplineCurve) aBSpline = buildInterpolationCurve (theArrayOfFPnt);
+ if(aBSpline.IsNull())
+ return false;
+
+ TopoDS_Edge anEdgLeft, anEdgRight;
+
+ BRepBuilderAPI_MakeEdge aMakeEdge(aBSpline);
+ if(aMakeEdge.IsDone())
+ anEdgLeft = aMakeEdge.Edge();
+
+ if(anEdgLeft.IsNull())
+ return false;
+
+ aBSpline.Nullify();
+ aBSpline = buildInterpolationCurve (theArrayOfLPnt);
+ if(aBSpline.IsNull())
+ return false;
+
+ aMakeEdge.Init(aBSpline);
+ if(aMakeEdge.IsDone())
+ anEdgRight = aMakeEdge.Edge();
+
+ if(anEdgRight.IsNull())
+ return false;
+
+ BRep_Builder aBB;
+ TopoDS_Compound aCmp;
+ aBB.MakeCompound(aCmp);
+ for (int i=1 ; i < theArrOfProfiles->Length() +1; i++ )
+ aBB.Add(aCmp, theArrOfProfiles->Value(i));
+
+ aBB.Add(aCmp,anEdgLeft);
+ aBB.Add(aCmp,anEdgRight);
+ BRepCheck_Analyzer aCh(aCmp);
+ if(aCh.IsValid())
+ thePrs.myPrs3D = aCmp;
+#ifdef DEB_UPDATE
+ else {
+ BRepTools::Write(aCmp, "str3d.brep");
+ thePrs.myPrs3D = aCmp;
+ }
+#endif
+
+ // Construct the top presentation
+ int aNbPoints = theArrayOfFPnt->Length();
+ Handle(TColgp_HArray1OfPnt) anArrayOfFPnt = new TColgp_HArray1OfPnt(1, aNbPoints);
+ Handle(TColgp_HArray1OfPnt) anArrayOfLPnt = new TColgp_HArray1OfPnt(1, aNbPoints);
+ for( int i=1; i <= aNbPoints; i++ ) {
+ gp_Pnt aPnt = theArrayOfFPnt->Value(i);
+ aPnt.SetZ(.0); // make 2d
+ anArrayOfFPnt->SetValue(i, aPnt);
+ aPnt = theArrayOfLPnt->Value(i);
+ aPnt.SetZ(.0);
+ anArrayOfLPnt->SetValue(i, aPnt);
+ }
+
+ aBSpline.Nullify();
+ aBSpline = buildInterpolationCurve (anArrayOfFPnt);
+ if(aBSpline.IsNull())
+ return false;
+
+ aMakeEdge.Init(aBSpline);
+ if(aMakeEdge.IsDone())
+ anEdgLeft = aMakeEdge.Edge();
+
+ aBSpline.Nullify();
+ aBSpline = buildInterpolationCurve (anArrayOfLPnt);
+ if(aBSpline.IsNull())
+ return false;
+
+ aMakeEdge.Init(aBSpline);
+ if(aMakeEdge.IsDone())
+ anEdgRight = aMakeEdge.Edge();
+ if(anEdgRight.IsNull())
+ return false;
+
+ BRepBuilderAPI_MakeEdge aMakeEdge2(anArrayOfFPnt->Value(1),anArrayOfLPnt->Value(1));
+ TopoDS_Edge aBotEdge, aTopEdge;
+ if(aMakeEdge2.IsDone())
+ aBotEdge = aMakeEdge2.Edge();
+
+ BRepBuilderAPI_MakeEdge aMakeEdge3(anArrayOfFPnt->Value(anArrayOfFPnt->Length()),anArrayOfLPnt->Value(anArrayOfLPnt->Length()));
+ if(aMakeEdge3.IsDone())
+ aTopEdge = aMakeEdge3.Edge();
+
+ // Make wire for 2D presentation with updating of corresponding edges
+ BRepBuilderAPI_MakeWire aMakeWire;
+
+ aMakeWire.Add( aBotEdge );
+ thePrs.myInlet = aMakeWire.Edge();
+
+ aMakeWire.Add( anEdgLeft );
+ thePrs.myLeftBank = aMakeWire.Edge();
+
+ aMakeWire.Add( aTopEdge );
+ thePrs.myOutlet = aMakeWire.Edge();
+
+ aMakeWire.Add( anEdgRight );
+ thePrs.myRightBank = aMakeWire.Edge();
+
+ TopoDS_Wire aSectProfileWire;
+ if(aMakeWire.IsDone())
+ aSectProfileWire = aMakeWire.Wire();
+
+ BRepBuilderAPI_MakeFace aMakeFace( aSectProfileWire, Standard_True );
+ TopoDS_Face aFace;
+ aMakeFace.Build();
+ if( aMakeFace.IsDone() )
+ aFace = aMakeFace.Face();
+
+ TopoDS_Shape aPrs2D;
+
+ if ( !theArrOf2DProfiles.IsNull() ) {
+ aCmp.Nullify();
+ aBB.MakeCompound(aCmp);
+ aBB.Add(aCmp,aFace);
+ for(int i=1;i <= theArrOf2DProfiles->Length(); i++)
+ aBB.Add(aCmp, theArrOf2DProfiles->Value(i));
+
+ aPrs2D = aCmp;
+ } else {
+ aPrs2D = aFace;
+ }
+
+ aCh.Init(aPrs2D);
+ if(aCh.IsValid())
+ thePrs.myPrs2D = aPrs2D;
+#ifdef DEB_UPDATE
+ else {
+ BRepTools::Write(aPrs2D, "str2d.brep");
+ thePrs.myPrs2D = aPrs2D;
+ }
+#endif
+
+ return true;
}
\ No newline at end of file