-// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
-//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
+// Copyright (C) 2014-2015 EDF-R&D
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
#include <QFileInfo>
#include <QString>
#include <QStringList>
+#include <QTextStream>
+#include <QColor>
HYDROData_SinusX::HYDROData_SinusX( )
{
if (IsNum)
{
aName = aName.left(aLastInd) + "_";
- /*for (int i = 0; i < aList.size() - 1; i++ )
- aName += aList[i];*/
aName+= QString::number(++anInd);
}
else
NCollection_Sequence<gp_XYZ> aPoints;
for (size_t j = 0; j < myCurveBlocks[i].myXYZPoints.size(); j++)
aPoints.Append(gp_XYZ (myCurveBlocks[i].myXYZPoints[j]));
- if (myCurveBlocks[i].myIsClosed)
- aPoints.Append(gp_XYZ (myCurveBlocks[i].myXYZPoints[0]));
+ /*if (myCurveBlocks[i].myIsClosed)
+ aPoints.Append(gp_XYZ (myCurveBlocks[i].myXYZPoints[0]));*/
Handle(HYDROData_ProfileUZ) aProfileUZ = Handle(HYDROData_ProfileUZ)::DownCast( theDocument->CreateObject( KIND_PROFILEUZ ) );
Handle(HYDROData_PolylineXY) aPolyXY = Handle(HYDROData_PolylineXY)::DownCast( theDocument->CreateObject( KIND_POLYLINEXY ) );
- aPolyXY->AddSection( "", myCurveBlocks[i].myIsSpline ? HYDROData_PolylineXY::SECTION_SPLINE : HYDROData_PolylineXY::SECTION_POLYLINE, false );
+ aPolyXY->AddSection( "",
+ myCurveBlocks[i].myIsSpline ? HYDROData_PolylineXY::SECTION_SPLINE : HYDROData_PolylineXY::SECTION_POLYLINE,
+ myCurveBlocks[i].myIsClosed ? true : false);
aProfileUZ->CalculateAndAddPoints(aPoints, aPolyXY);
Handle(HYDROData_Profile) aProfile = Handle(HYDROData_Profile)::DownCast( theDocument->CreateObject( KIND_PROFILE ) );
aProfile->SetParametricPoints(aProfileUZ->GetPoints());
aPolyXY->SetName(GetName(myCurveBlocks[i].myName + "_polyXY"));
aProfileUZ->SetName(GetName(myCurveBlocks[i].myName + "_profileUZ"));
aProfile->SetName(GetName(myCurveBlocks[i].myName + "_profile"));
+ aPolyXY->SetWireColor(HYDROData_PolylineXY::DefaultWireColor());
theEntities.Append(aPolyXY);
theEntities.Append(aProfileUZ);
theEntities.Append(aProfile);
HYDROData_ProfileUZ::PointsList aPointList;
for (size_t j = 0; j < myCurveBlocks[i].myXYZPoints.size(); j++)
aPointList.Append(gp_XY (myCurveBlocks[i].myXYZPoints[j].X(), myCurveBlocks[i].myXYZPoints[j].Z()));
-
+ aProfile->GetProfileUZ()->SetSectionType(0, myCurveBlocks[i].myIsSpline ? HYDROData_PolylineXY::SECTION_SPLINE : HYDROData_PolylineXY::SECTION_POLYLINE);
+ aProfile->GetProfileUZ()->SetSectionClosed(0, myCurveBlocks[i].myIsClosed ? true : false);
aProfile->SetParametricPoints(aPointList);
if ( ! (myCurveBlocks[i].myAdditionalCurveInfo[0] == 0 && myCurveBlocks[i].myAdditionalCurveInfo[1] == 0 &&
myCurveBlocks[i].myAdditionalCurveInfo[2] == 0 && myCurveBlocks[i].myAdditionalCurveInfo[3] == 0) )
HYDROData_Profile::ProfilePoints aPointList;
for (size_t j = 0; j < myCurveBlocks[i].myXYZPoints.size(); j++)
aPointList.Append(myCurveBlocks[i].myXYZPoints[j]);
+ aProfile->GetProfileUZ()->SetSectionType(0, myCurveBlocks[i].myIsSpline ? HYDROData_PolylineXY::SECTION_SPLINE : HYDROData_PolylineXY::SECTION_POLYLINE);
+ aProfile->GetProfileUZ()->SetSectionClosed(0, myCurveBlocks[i].myIsClosed ? true : false);
aProfile->SetProfilePoints(aPointList);
aProfile->SetName(GetName(myCurveBlocks[i].myName + "_profile"));
theEntities.Append(aProfile);
}
+bool HYDROData_SinusX::Export(const QString& theFilePath, const NCollection_Sequence<Handle_HYDROData_Entity>& theEntities)
+{
+ if ( theFilePath.isEmpty() )
+ {
+ return false;
+ }
+
+ QString anExt = theFilePath.split('.', QString::SkipEmptyParts).back();
+
+ if (anExt == "sx")
+ {
+ QFile aFile (theFilePath);
+
+ aFile.open(QIODevice::WriteOnly | QIODevice::Truncate | QIODevice::Text);
+
+ HydroToSX(aFile, theEntities);
+
+ aFile.close();
+
+ return true;
+ }
+ else
+ return false;
+
+}
+
+void HYDROData_SinusX::HydroToSX(QFile& theFile, const NCollection_Sequence<Handle_HYDROData_Entity>& theEntities)
+{
+ QTextStream aTextStream(&theFile);
+ aTextStream << "C Generated by HYDRO Module\n";
+ aTextStream << "C\n";
+
+ for (int i = 1; i <= theEntities.Size(); i++)
+ {
+ Handle_HYDROData_Entity anEnt = theEntities.Value(i);
+ if (anEnt->IsKind( STANDARD_TYPE(HYDROData_Bathymetry) ))
+ {
+ Handle(HYDROData_Bathymetry) aBathy = Handle(HYDROData_Bathymetry)::DownCast( anEnt );
+ HYDROData_Bathymetry::AltitudePoints anXYZPoints = aBathy->GetAltitudePoints(true);
+ //Write to stream
+ aTextStream << "B S\n";
+ aTextStream << "CN " << aBathy->GetName() << "\n";
+ aTextStream << "CP 0 0\n";
+ aTextStream << "CP 0\n";
+ for (int j = anXYZPoints.Lower(); j <= anXYZPoints.Upper(); j++)
+ aTextStream << " " << QString::number(anXYZPoints(j).X(), 'f', 3)
+ << " " << QString::number(anXYZPoints(j).Y(), 'f', 3)
+ << " " << QString::number(anXYZPoints(j).Z(), 'f', 3) << "\n";
+ }
+ else if (anEnt->IsKind( STANDARD_TYPE(HYDROData_PolylineXY) ))
+ {
+ Handle(HYDROData_PolylineXY) aPolyXY = Handle(HYDROData_PolylineXY)::DownCast( anEnt );
+ for (int j = 0; j < aPolyXY->NbSections(); j++)
+ {
+ //Collect data
+ bool IsClosed = aPolyXY->IsClosedSection(j);
+ bool IsSpline = false;
+ if (aPolyXY->GetSectionType(j) == HYDROData_PolylineXY::SECTION_SPLINE)
+ IsSpline = true;
+ HYDROData_PolylineXY::PointsList anXYPoints = aPolyXY->GetPoints(j, true);
+ //Write to stream
+ aTextStream << "B N\n";
+ aTextStream << "CN " << aPolyXY->GetName() << "\n";
+ aTextStream << "CP " << IsClosed << " " << IsSpline << "\n";
+ aTextStream << "CP 0.0\n";
+ aTextStream << "CP 0\n";
+ if (aPolyXY->NbSections() > 1)
+ aTextStream << "C " << aPolyXY->GetName() << "_section_" << QString::number(j) << "\n";
+ for (int k = anXYPoints.Lower(); k <= anXYPoints.Upper(); k++)
+ aTextStream << " " << QString::number(anXYPoints(k).X(), 'f', 3)
+ << " " << QString::number(anXYPoints(k).Y(), 'f', 3)
+ << " 0.000\n";
+ }
+ }
+ else if (anEnt->IsKind( STANDARD_TYPE(HYDROData_Profile) ))
+ {
+ //Collect data
+ Handle(HYDROData_Profile) aProfile = Handle(HYDROData_Profile)::DownCast( anEnt );
+ HYDROData_ProfileUZ::PointsList aPointList = aProfile->GetParametricPoints();
+ bool IsClosed = aProfile->GetProfileUZ(false)->IsClosedSection(0);;
+ bool IsSpline = false;
+ if (aProfile->GetProfileUZ(false)->GetSectionType(0) == HYDROData_PolylineXY::SECTION_SPLINE)
+ IsSpline = true;
+ //Write to stream
+ aTextStream << "B P\n";
+ aTextStream << "CN " << aProfile->GetName() << "\n";
+ aTextStream << "CP " << IsClosed << " " << IsSpline << "\n";
+ gp_XY aLeftPoint(0.0, 0.0);
+ gp_XY aRightPoint(0.0, 0.0);
+ if (aProfile->GetLeftPoint(aLeftPoint, true) && aProfile->GetRightPoint(aRightPoint, true))
+ aTextStream << "CP " << QString::number(aLeftPoint.X(), 'f', 3) << " " <<
+ QString::number(aLeftPoint.Y(), 'f', 3) << " " <<
+ QString::number(aRightPoint.X(), 'f', 3) << " " <<
+ QString::number(aRightPoint.Y(), 'f', 3) << "\n";
+ else
+ aTextStream << "CP 0.0 0.0 0.0 0.0\n";
+ aTextStream << "CP 2\n";
+ for (int k = aPointList.Lower(); k <= aPointList.Upper(); k++)
+ aTextStream << " " << QString::number(aPointList(k).X(), 'f', 3)
+ << " 0.000 "
+ << QString::number(aPointList(k).Y(), 'f', 3) << "\n";
+ }
+ }
+}
\ No newline at end of file
