#include <Geom2d_TrimmedCurve.hxx>
#include <Geom_BSplineCurve.hxx>
#include <Geom2d_BSplineCurve.hxx>
+#include <GeomAPI_Interpolate.hxx>
#include <TColStd_Array1OfReal.hxx>
#include <TColStd_Array1OfInteger.hxx>
#include <TColgp_Array1OfPnt.hxx>
+#include <TColgp_Array1OfVec.hxx>
+#include <TColgp_HArray1OfPnt.hxx>
#include <Geom2dAPI_InterCurveCurve.hxx>
#include <Geom2dAPI_ProjectPointOnCurve.hxx>
#include <Geom2dAdaptor_Curve.hxx>
#include <GCPnts_AbscissaPoint.hxx>
+#include <BRepBuilderAPI_MakeEdge.hxx>
#include <limits>
IMPLEMENT_STANDARD_HANDLE( HYDROData_DTM, HYDROData_Bathymetry )
IMPLEMENT_STANDARD_RTTIEXT( HYDROData_DTM, HYDROData_Bathymetry )
-HYDROData_DTM::CurveUZ::CurveUZ( double theXCurv )
- : myXcurv( theXCurv )
+HYDROData_DTM::CurveUZ::CurveUZ( double theXCurv, const gp_Vec2d& theProfileDir )
+ : myXcurv( theXCurv ), myProfileDir( theProfileDir )
{
}
return myXcurv;
}
+gp_Vec2d HYDROData_DTM::CurveUZ::ProfileDir() const
+{
+ return myProfileDir;
+}
+
HYDROData_DTM::CurveUZ HYDROData_DTM::CurveUZ::operator + ( const CurveUZ& c ) const
{
- HYDROData_DTM::CurveUZ res( Xcurv() + c.Xcurv() );
+ HYDROData_DTM::CurveUZ res( Xcurv() + c.Xcurv(), ProfileDir() + c.ProfileDir() );
size_t n = size();
res.reserve( n );
for( int i=0; i<n; i++ )
HYDROData_DTM::CurveUZ HYDROData_DTM::CurveUZ::operator * ( double d ) const
{
- HYDROData_DTM::CurveUZ res( Xcurv()*d );
+ HYDROData_DTM::CurveUZ res( Xcurv()*d, ProfileDir()*d );
size_t n = size();
res.reserve( n );
for( int i=0; i<n; i++ )
return res;
}
+void HYDROData_DTM::Bank::reserve( int theNbPoints )
+{
+ myPoints.reserve( theNbPoints );
+ myDirs.reserve( theNbPoints );
+}
+
+void HYDROData_DTM::Bank::push_back( const gp_Pnt& thePnt, const gp_Dir& theTangent )
+{
+ myPoints.push_back( thePnt );
+ myDirs.push_back( theTangent );
+}
+
+void HYDROData_DTM::Bank::clear()
+{
+ myPoints.clear();
+ myDirs.clear();
+}
+
+TopoDS_Edge HYDROData_DTM::Bank::createEdge3d() const
+{
+ size_t n = myPoints.size();
+ if( n<2 )
+ return TopoDS_Edge();
+
+ Handle_Geom_BSplineCurve aCurve;
+
+ Handle(TColgp_HArray1OfPnt) points = new TColgp_HArray1OfPnt( 1, (int)n );
+ TColgp_Array1OfVec tangents( 1, (int)n );
+ Handle(TColStd_HArray1OfBoolean) flags = new TColStd_HArray1OfBoolean( 1, (int)n );
+
+ for( size_t i = 1; i <= n; i++ )
+ {
+ gp_Pnt aPnt = myPoints[i-1];
+ gp_Vec aVec = myDirs[i-1];
+ points->SetValue( (int)i, aPnt );
+ tangents.SetValue( (int)i, aVec );
+ flags->SetValue( (int)i, Standard_True );
+ }
+
+ GeomAPI_Interpolate anInterpolator( points, Standard_False, Standard_False );
+ anInterpolator.Load( tangents, flags );
+ anInterpolator.Perform();
+ if( anInterpolator.IsDone() )
+ {
+ aCurve = anInterpolator.Curve();
+ return BRepBuilderAPI_MakeEdge( aCurve ).Edge();
+ }
+ else
+ return TopoDS_Edge();
+}
+
HYDROData_DTM::HYDROData_DTM()
double step = GetSpatialStep();
const double EPS = 1E-3;
AltitudePoints points;
+
+ myLeft.clear();
+ myRight.clear();
if( ddz>EPS && step>EPS )
- points = Interpolate( profiles, ddz, step );
+ points = Interpolate( profiles, ddz, step, &myLeft, &myRight );
SetAltitudePoints( points );
}
Standard_Real aParamFirst = anAdaptor.FirstParameter(), aParamLast = anAdaptor.LastParameter();
for( size_t i = 1; i <= n; i++ )
{
- gp_Pnt2d aPnt = points->Value( i );
+ gp_Pnt2d aPnt = points->Value( (Standard_Integer)i );
Geom2dAPI_ProjectPointOnCurve aProject( aPnt, aResult );
Standard_Real aParam = aProject.LowerDistanceParameter();
double aDistance = GCPnts_AbscissaPoint::Length( anAdaptor, aParamFirst, aParam );
std::vector<Handle_Geom2d_Curve> HYDROData_DTM::ProfileToParametric(
const Handle_HYDROData_Profile& theProfile,
- double& theUMin, double& theUMax )
+ double& theUMin, double& theUMax, gp_Vec2d& theDir )
{
std::vector<Handle_Geom2d_Curve> curves;
// Transformation of the coordinate systems
gp_Pnt aLowest;
- gp_Vec2d aDir;
double zmin, zmax;
- GetProperties( theProfile, aLowest, aDir, false, zmin, zmax );
+ GetProperties( theProfile, aLowest, theDir, false, zmin, zmax );
gp_Ax3 aStd3d( gp_Pnt( 0, 0, 0 ), gp_Dir( 0, 0, 1 ), gp_Dir( 1, 0, 0 ) );
- gp_Ax3 aLocal( aLowest, gp_Dir( 0, 0, 1 ), gp_Dir( aDir.X(), aDir.Y(), 0 ) );
+ gp_Ax3 aLocal( aLowest, gp_Dir( 0, 0, 1 ), gp_Dir( theDir.X(), theDir.Y(), 0 ) );
gp_Trsf aTransf;
aTransf.SetTransformation( aStd3d, aLocal );
}
-double CalcGC( const std::vector<gp_Pnt2d>& intersections )
-{
- double u = 0;
- size_t n = intersections.size();
- for( size_t i = 0; i < n; i++ )
- {
- u += intersections[i].X();
- }
- u /= n;
- return u;
-}
-
-double CalcWidth( const std::vector<gp_Pnt2d>& intersections )
+bool CalcMidWidth( const std::vector<gp_Pnt2d>& intersections, double& theMid, double& theWid )
{
double umin = std::numeric_limits<double>::max(),
umax = -umin;
size_t n = intersections.size();
if( n <= 1 )
- return 0;
+ return false;
for( size_t i = 0; i < n; i++ )
{
if( u>umax )
umax = u;
}
- return umax-umin;
+ theMid = ( umin+umax )/2;
+ theWid = umax-umin;
+ return true;
}
void HYDROData_DTM::ProfileDiscretization( const Handle_HYDROData_Profile& theProfile,
aUMax = -aUMin,
aVMax = 1000000;
- std::vector<Handle_Geom2d_Curve> curves = ProfileToParametric( theProfile, aUMin, aUMax );
+ gp_Vec2d aProfileDir;
+ std::vector<Handle_Geom2d_Curve> curves = ProfileToParametric( theProfile, aUMin, aUMax, aProfileDir );
size_t n = curves.size();
if( n==0 )
curves.push_back( aT2 );
int psize = ( int )( ( theMaxZ-theMinZ ) / theDDZ + 1 );
- theMidPointCurve = CurveUZ( theXCurv );
+ theMidPointCurve = CurveUZ( theXCurv, aProfileDir );
theMidPointCurve.reserve( psize );
- theWidthCurve = CurveUZ( theXCurv );
+ theWidthCurve = CurveUZ( theXCurv, aProfileDir );
theWidthCurve.reserve( psize );
n = curves.size();
if( intersections.size() >= 2 )
{
- double u_mid = CalcGC( intersections );
+ double u_mid, u_wid;
+ if( !CalcMidWidth( intersections, u_mid, u_wid ) )
+ continue;
+
PointUZ p_mid;
p_mid.U = u_mid;
p_mid.Z = z;
theMidPointCurve.push_back( p_mid );
- double u_wid = CalcWidth( intersections );
PointUZ p_wid;
p_wid.U = u_wid;
p_wid.Z = z;
if( isAddSecond )
theInterpolation.push_back( theCurveB );
}
-
+#include <BRepLib_MakeEdge2d.hxx>
void HYDROData_DTM::CurveTo3D( const Handle_Geom2d_BSplineCurve& theHydraulicAxis,
const CurveUZ& theMidCurve, const CurveUZ& theWidthCurve,
- AltitudePoints& thePoints )
+ AltitudePoints& thePoints,
+ Bank* theLeft, Bank* theRight, double dz )
{
Geom2dAdaptor_Curve anAdaptor( theHydraulicAxis );
+ TopoDS_Edge E2d = BRepLib_MakeEdge2d(theHydraulicAxis).Edge();
GCPnts_AbscissaPoint ap( anAdaptor, theMidCurve.Xcurv(), anAdaptor.FirstParameter() );
double aParam = ap.Parameter();
gp_Pnt2d point;
- gp_Vec2d tangent, profile_dir;
- anAdaptor.D1( aParam, point, tangent );
- profile_dir.SetCoord( tangent.Y(), -tangent.X() );
+ anAdaptor.D0( aParam, point );
+ gp_Vec2d profile_dir = theMidCurve.ProfileDir();
+ gp_Dir tangent_n( -profile_dir.Y(), profile_dir.X(), dz );
profile_dir.Normalize();
-
+
size_t n = theMidCurve.size();
+ double min_param = 1E+15;
+ double max_param = -1E+15;
+ double z1, z2;
for( size_t i=0; i<n; i++ )
{
double param1 = theMidCurve[i].U - theWidthCurve[i].U / 2;
double param2 = theMidCurve[i].U + theWidthCurve[i].U / 2;
- gp_Pnt2d p1 = point.Translated( param1 * profile_dir / 2 );
- gp_Pnt2d p2 = point.Translated( param2 * profile_dir / 2 );
+ gp_Pnt2d p1 = point.Translated( param1 * profile_dir);
+ gp_Pnt2d p2 = point.Translated( param2 * profile_dir);
double z = theMidCurve[i].Z;
+ if( param1 < min_param )
+ {
+ min_param = param1;
+ z1 = z;
+ }
+ if( param2 < min_param )
+ {
+ min_param = param2;
+ z1 = z;
+ }
+ if( param1 > max_param )
+ {
+ max_param = param1;
+ z2 = z;
+ }
+ if( param2 > max_param )
+ {
+ max_param = param2;
+ z2 = z;
+ }
+
AltitudePoint p3d_1( p1.X(), p1.Y(), z ), p3d_2( p2.X(), p2.Y(), z );
thePoints.push_back( p3d_1 );
thePoints.push_back( p3d_2 );
}
+
+ if( theLeft )
+ {
+ gp_Pnt2d left2d = point.Translated( min_param * profile_dir );
+ gp_Pnt left( left2d.X(), left2d.Y(), z1 );
+ theLeft->push_back( left, tangent_n );
+ }
+ if( theRight )
+ {
+ gp_Pnt2d right2d = point.Translated( max_param * profile_dir );
+ gp_Pnt right( right2d.X(), right2d.Y(), z2 );
+ theRight->push_back( right, tangent_n );
+ }
}
inline double max( double a, double b )
return b;
}
+#include <BRepLib_MakeWire.hxx>
+
HYDROData_Bathymetry::AltitudePoints HYDROData_DTM::Interpolate
( const Handle_Geom2d_BSplineCurve& theHydraulicAxis,
const Handle_HYDROData_Profile& theProfileA,
double theXCurvA,
const Handle_HYDROData_Profile& theProfileB,
double theXCurvB,
- double theDDZ, int theNbSteps, bool isAddSecond )
+ double theDDZ, int theNbSteps, bool isAddSecond,
+ Bank* theLeft, Bank* theRight )
{
double zminA, zmaxA, zminB, zmaxB;
gp_Pnt lowestA, lowestB;
GetProperties( theProfileA, lowestA, dirA, false, zminA, zmaxA );
GetProperties( theProfileB, lowestB, dirB, false, zminB, zmaxB );
+ double dz = zminB - zminA;
+
double zmin = max( zminA, zminB );
double zmax = max( zmaxA, zmaxB );
- CurveUZ midA(0), midB(0);
- CurveUZ widA(0), widB(0);
+ CurveUZ midA(0, gp_Vec2d()), midB(0, gp_Vec2d());
+ CurveUZ widA(0, gp_Vec2d()), widB(0, gp_Vec2d());
ProfileDiscretization( theProfileA, theXCurvA, zmin, zmax, theDDZ, midA, widA );
ProfileDiscretization( theProfileB, theXCurvB, zmin, zmax, theDDZ, midB, widB );
AltitudePoints points;
points.reserve( p*q );
for( size_t i=0; i<p; i++ )
- CurveTo3D( theHydraulicAxis, mid[i], wid[i], points );
+ CurveTo3D( theHydraulicAxis, mid[i], wid[i], points, theLeft, theRight, dz );
+
+ BRepLib_MakeWire WM;
+ for (int i =0; i < theLeft->myPoints.size() - 1; i++)
+ WM.Add(BRepLib_MakeEdge(theLeft->myPoints[i], theLeft->myPoints[i+1]).Edge());
+ TopoDS_Wire W = WM.Wire();
return points;
}
HYDROData_Bathymetry::AltitudePoints HYDROData_DTM::Interpolate
( const std::vector<Handle_HYDROData_Profile>& theProfiles,
- double theDDZ, double theSpatialStep )
+ double theDDZ, double theSpatialStep,
+ Bank* theLeft,
+ Bank* theRight )
{
AltitudePoints points;
size_t n = theProfiles.size();
if( aHydraulicAxis.IsNull() )
return points;
+ int aNbStepsComplete = 0;
for( size_t i=0, n1=n-1; i<n1; i++ )
{
double aDistance = distances[i+1]-distances[i];
- int aNbSteps = int(aDistance/theSpatialStep) + 1;
+ aNbStepsComplete += ( int(aDistance/theSpatialStep) /*+ 1*/ );
+ }
+ if( theLeft )
+ theLeft->reserve( aNbStepsComplete );
+ if( theRight )
+ theRight->reserve( aNbStepsComplete );
+
+ for( size_t i=0, n1=n-1; i<n1; i++ )
+ {
+ double aDistance = distances[i+1]-distances[i];
+ int aNbSteps = int(aDistance/theSpatialStep) /*+ 1*/;
bool isAddSecond = i==n1-1;
+
AltitudePoints local_points = Interpolate( aHydraulicAxis, theProfiles[i], distances[i],
- theProfiles[i+1], distances[i+1], theDDZ, aNbSteps, isAddSecond );
+ theProfiles[i+1], distances[i+1], theDDZ, aNbSteps, isAddSecond, theLeft, theRight );
+
if( i==0 )
points.reserve( local_points.size() * ( n-1 ) );
+
for( size_t j=0, m=local_points.size(); j<m; j++ )
points.push_back( local_points[j] );
}
return points;
}
+
+void HYDROData_DTM::CreateBankShapes( TopoDS_Edge& theLeft, TopoDS_Edge& theRight ) const
+{
+ theLeft = myLeft.createEdge3d();
+ theRight = myRight.createEdge3d();
+}