#include <BRep_Builder.hxx>
#include <GeomProjLib.hxx>
#include <Geom_TrimmedCurve.hxx>
-#include <Geom_Plane.hxx>
#include <BRepTools_WireExplorer.hxx>
#include <TopTools_IndexedMapOfShape.hxx>
#include <BRepBuilderAPI_MakeFace.hxx>
#include <TopExp.hxx>
#include <TopTools_IndexedMapOfOrientedShape.hxx>
+#include <TopTools_IndexedDataMapOfShapeListOfShape.hxx>
#include <BRepLib_MakeEdge.hxx>
#include <BRepLib_MakeWire.hxx>
#include <BRep_Builder.hxx>
#include <ShapeAnalysis_Wire.hxx>
+#include <BRepAlgo_NormalProjection.hxx>
+#include <ShapeUpgrade_UnifySameDomain.hxx>
+#include <BRepBuilderAPI_MakePolygon.hxx>
+#include <BOPAlgo_Builder.hxx>
+#include <BRepAdaptor_Curve.hxx>
+#include <GeomProjLib.hxx>
+#include <gp_Pln.hxx>
+#include <TopTools_IndexedDataMapOfShapeShape.hxx>
+#include <TopTools_ListIteratorOfListOfShape.hxx>
+#include <TopTools_SequenceOfShape.hxx>
+#include <assert.h>
-
-
-IMPLEMENT_STANDARD_HANDLE( HYDROData_DTM, HYDROData_Bathymetry )
IMPLEMENT_STANDARD_RTTIEXT( HYDROData_DTM, HYDROData_Bathymetry )
-
-HYDROData_DTM::CurveUZ::CurveUZ( double theXCurv, const gp_Vec2d& theProfileDir, double theDeltaZ )
- : myXcurv( theXCurv ), myProfileDir( theProfileDir ), myDeltaZ( theDeltaZ )
+HYDROData_DTM::CurveUZ::CurveUZ( double theXCurv, const gp_Vec2d& theProfileDir, double theDeltaZ, double theMaxZ )
+ : myXcurv( theXCurv ), myProfileDir( theProfileDir ), myDeltaZ( theDeltaZ ), myMaxZ (theMaxZ)
{
}
return myDeltaZ;
}
+double HYDROData_DTM::CurveUZ::MaxZ() const
+{
+ return myMaxZ;
+}
+
HYDROData_DTM::CurveUZ HYDROData_DTM::CurveUZ::operator + ( const CurveUZ& c ) const
{
- HYDROData_DTM::CurveUZ res( Xcurv() + c.Xcurv(), ProfileDir() + c.ProfileDir(), DeltaZ() + c.DeltaZ() );
+ HYDROData_DTM::CurveUZ res( Xcurv() + c.Xcurv(), ProfileDir() + c.ProfileDir(), DeltaZ() + c.DeltaZ(), MaxZ() + c.MaxZ() );
size_t n = size(), n1 = c.size();
if( n!=n1 )
{
std::cout << "Warning: different number of points in curves: " << n << ", " << n1 << std::endl;
}
- res.reserve( n );
- for( int i=0; i<n; i++ )
+ int q = std::min(n, n1);
+ res.reserve( q );
+ for( int i=0; i<q; i++ )
{
PointUZ p;
p.U = operator[]( i ).U + c[i].U;
HYDROData_DTM::CurveUZ HYDROData_DTM::CurveUZ::operator * ( double d ) const
{
- HYDROData_DTM::CurveUZ res( Xcurv()*d, ProfileDir()*d, DeltaZ()*d );
+ HYDROData_DTM::CurveUZ res( Xcurv()*d, ProfileDir()*d, DeltaZ()*d, MaxZ()*d );
size_t n = size();
res.reserve( n );
for( int i=0; i<n; i++ )
Changed( Geom_3d );
}
-void HYDROData_DTM::PointToWire(const AltitudePoints& pnts, TopoDS_Wire& W )
+void HYDROData_DTM::PointsToWire(const AltitudePoints& pnts, TopoDS_Wire& W )
{
- BRepLib_MakeWire WM;
- if (pnts.empty())
- return;
- for (int i = 0; i < pnts.size() - 1; i++)
+
+ BRepBuilderAPI_MakePolygon PM;
+ for (int i = 0; i < pnts.size(); i++)
+ PM.Add(gp_Pnt(pnts[i].X, pnts[i].Y, pnts[i].Z));
+
+ W = PM.Wire();
+}
+
+void HYDROData_DTM::PointsToEdge(const AltitudePoints& pnts, TopoDS_Edge& E )
+{
+ Handle(TColgp_HArray1OfPnt) gpPoints = new TColgp_HArray1OfPnt(1, (int)pnts.size());
+
+ for (int i = 0; i < pnts.size(); i++)
+ gpPoints->SetValue(i+1, gp_Pnt(pnts[i].X, pnts[i].Y, pnts[i].Z));
+
+ GeomAPI_Interpolate anInterpolator(gpPoints, Standard_False,1.0e-6);
+ anInterpolator.Perform() ;
+ if (anInterpolator.IsDone())
{
- gp_Pnt p1(pnts[i].X, pnts[i].Y, pnts[i].Z);
- gp_Pnt p2(pnts[i+1].X, pnts[i+1].Y, pnts[i+1].Z);
- WM.Add(BRepLib_MakeEdge(p1, p2).Edge());
+ Handle(Geom_BSplineCurve) C = anInterpolator.Curve();
+ E = BRepBuilderAPI_MakeEdge(C).Edge();
}
- if (WM.IsDone())
- W = WM.Wire();
}
TopTools_IndexedMapOfOrientedShape HYDROData_DTM::Create3DShape(const AltitudePoints& left,
const std::vector<AltitudePoints>& main_profiles)
{
TopTools_IndexedMapOfOrientedShape ll;
- TopoDS_Wire LWire, RWire;
- PointToWire(left, LWire);
- PointToWire(right, RWire);
- if (!LWire.IsNull())
- ll.Add(LWire.Oriented(TopAbs_FORWARD));
+ //TopoDS_Wire LWire, RWire;
+ //PointsToWire(left, LWire);
+ //PointsToWire(right, RWire);
+ TopoDS_Edge LEdge, REdge;
+ PointsToEdge(left, LEdge);
+ PointsToEdge(right, REdge);
+ if (!LEdge.IsNull())
+ ll.Add(LEdge.Oriented(TopAbs_FORWARD));
for (int k = 0; k < main_profiles.size(); k++)
{
TopoDS_Wire W;
- PointToWire(main_profiles[k], W);
+ PointsToWire(main_profiles[k], W);
TopAbs_Orientation Ori = TopAbs_INTERNAL;
if (k == 0 || k == main_profiles.size() - 1)
Ori = TopAbs_FORWARD;
ll.Add(W.Oriented(Ori));
}
- if (!RWire.IsNull())
- ll.Add(RWire.Oriented(TopAbs_FORWARD));
+ if (!REdge.IsNull())
+ ll.Add(REdge.Oriented(TopAbs_FORWARD));
//yes, add subshapes in this order (left + profiles + right)
//otherwise the projected wire will be non-manifold
bool WireIntersections; //__TODO
CreateProfilesFromDTM( objs, ddz, step, points, Out3dPres, Out2dPres, OutLeftB, OutRightB, OutInlet, OutOutlet, true, true, InvInd, -1, WireIntersections );
SetAltitudePoints( points );
-
+
SetShape( DataTag_LeftBankShape, OutLeftB);
SetShape( DataTag_RightBankShape, OutRightB);
SetShape( DataTag_InletShape, OutInlet);
Out3dPres = GetShape( DataTag_3DShape );
Out2dPres = GetShape( DataTag_2DShape );
}
-
void HYDROData_DTM::CreateProfilesFromDTM (const HYDROData_SequenceOfObjects& InpProfiles,
double ddz,
double step,
int aLower = InpProfiles.Lower(), anUpper = InpProfiles.Upper();
size_t n = anUpper - aLower + 1;
- std::vector<Handle_HYDROData_Profile> profiles;
+ std::vector<Handle(HYDROData_Profile)> profiles;
profiles.reserve( n );
for( int i=aLower; i<=anUpper; i++ )
{
Out3dPres, Out2dPres, OutLeftB, OutRightB, OutInlet, OutOutlet, Create3dPres, Create2dPres, InvInd, WireIntersections );
}
-void HYDROData_DTM::ProjWireOnPlane(const TopoDS_Wire& inpWire, const Handle_Geom_Plane& RefPlane, TopoDS_Wire& outWire)
+bool HYDROData_DTM::GetPlanarFaceFromBanks( const TopoDS_Edge& LB, const TopoDS_Edge& RB, TopoDS_Face& outF,
+ TopTools_SequenceOfShape* Boundr)
{
- //its also possible to use BrepAlgo_NormalProjection here!
- BRepTools_WireExplorer ex(TopoDS::Wire(inpWire.Oriented(TopAbs_FORWARD)));
- BRepLib_MakeWire WM;
- for (;ex.More();ex.Next())
- {
- const TopoDS_Edge& CE = ex.Current();
- double f, l;
- Handle(Geom_Curve) C3d = BRep_Tool::Curve(CE, f, l);
- Handle(Geom_Curve) ProjectedCurve = GeomProjLib::ProjectOnPlane(new Geom_TrimmedCurve(C3d, f, l), RefPlane, RefPlane->Position().Direction(), Standard_True);
- TopoDS_Edge ProjEdge = BRepLib_MakeEdge(ProjectedCurve);
- WM.Add(ProjEdge); //auto sharing between edges if vertex is coincident
- }
- outWire = WM.Wire();
- outWire.Orientation(inpWire.Orientation()); //take from the original wire
-}
+ BRep_Builder BB;
+ TopoDS_Face F;
+ Handle_Geom_Plane refpl = new Geom_Plane(gp_Pnt(0,0,0), gp_Dir(0,0,1));
+ TopoDS_Vertex VFI, VLI, VFO, VLO;
+ TopoDS_Edge prLB;
+ TopoDS_Edge prRB;
-bool HYDROData_DTM::Get2dFaceFrom3dPres(const TopoDS_Compound& cmp, TopoDS_Face& outF )
-{
- Handle_Geom_Plane refpl = new Geom_Plane(gp_Pnt(0,0,0), gp_Dir(0,0,1));
- BRepLib_MakeWire WM;
- TopoDS_Iterator it(cmp);
- //TopTools_IndexedMapOfShape IntW;
- for (;it.More(); it.Next())
- {
- const TopoDS_Wire& W = TopoDS::Wire(it.Value());
- if (W.Orientation() != TopAbs_INTERNAL)
- {
- //use list of edges to protect againts non-manifold cases.
- //auto sharing between edges will be added automatically
- TopTools_IndexedMapOfShape ME;
- TopTools_ListOfShape LE;
- TopExp::MapShapes(W, TopAbs_EDGE, ME);
- for (int i = 1; i <= ME.Extent(); i++)
- LE.Append(ME(i));
- WM.Add(LE);
- }
- //else
- // IntW.Add(W);
- }
- TopoDS_Wire outW;
- ProjWireOnPlane(WM.Wire(), refpl, outW);
- BRepBuilderAPI_MakeFace mf(refpl, outW, true); //check inside is true by def
- outF = mf.Face();
+ BRepAdaptor_Curve LBAD(LB);
+ Handle_Geom_Curve LBPC = GeomProjLib::ProjectOnPlane(LBAD.Curve().Curve(), refpl, gp_Dir(0, 0, -1), 1 );
+ prLB = BRepLib_MakeEdge(LBPC).Edge();
- ShapeAnalysis_Wire WA(outW, outF, Precision::Confusion());
- bool res = WA.CheckSelfIntersection();
- return res;
+ BRepAdaptor_Curve RBAD(RB);
+ Handle_Geom_Curve RBPC = GeomProjLib::ProjectOnPlane(RBAD.Curve().Curve(), refpl, gp_Dir(0, 0, -1), 1 );
+ prRB = BRepLib_MakeEdge(RBPC).Edge();
- ///!!! the internal wires cant be added with 'internal' ori.
- // it's possible to do with brep builder yet the result will not be correct!
- // more proper way is to use BOP operation here.
- /*for (int i = 1; i <= IntW.Extent(); i++)
+ TopExp::Vertices(prLB, VFI, VFO, 1);
+ TopExp::Vertices(prRB, VLI, VLO, 1);
+ TopoDS_Edge prIL = BRepLib_MakeEdge(VFI, VLI).Edge();
+ TopoDS_Edge prOL = BRepLib_MakeEdge(VFO, VLO).Edge();
+ TopoDS_Wire prW = BRepLib_MakeWire(prLB, prIL, prOL, prRB).Wire();
+ outF = BRepBuilderAPI_MakeFace(refpl->Pln(), prW, 1).Face();
+
+ if (Boundr)
{
- TopoDS_Wire outIW;
- const TopoDS_Wire& W = TopoDS::Wire(IntW(i));
- ProjWireOnPlane(W, refpl, outIW);
- BB.Add(outF, outIW);
- }*/
+ Boundr->Append(prLB);
+ Boundr->Append(prIL);
+ Boundr->Append(prOL);
+ Boundr->Append(prRB);
+ }
+
+ ShapeAnalysis_Wire WA(prW, outF, Precision::Confusion());
+ bool res = WA.CheckSelfIntersection();
+ return !res;
}
-void HYDROData_DTM::CreateProfiles(const std::vector<Handle_HYDROData_Profile>& theProfiles,
+void HYDROData_DTM::CreateProfiles(const std::vector<Handle(HYDROData_Profile)>& theProfiles,
double theDDZ,
double theSpatialStep,
AltitudePoints& theOutLeft,
bool Create3dPres,
bool Create2dPres,
std::set<int>& InvInd,
- bool& WireIntersections)
+ bool& ProjStat)
{
if (theProfiles.empty())
return;
theOutPoints = Interpolate( theProfiles, theDDZ, theSpatialStep, theOutLeft, theOutRight, theOutMainProfiles, InvInd );
//note that if Create3dPres is false => Create2dPres flag is meaningless!
+ if( theOutPoints.empty() )
+ return;
+
if (Create3dPres)
{
TopTools_IndexedMapOfOrientedShape ll = Create3DShape( theOutLeft, theOutRight, theOutMainProfiles);
if (Create2dPres)
{
TopoDS_Face outF;
- WireIntersections = Get2dFaceFrom3dPres(cmp, outF); //__TODO
+ ProjStat = GetPlanarFaceFromBanks(TopoDS::Edge(OutLeftB), TopoDS::Edge(OutRightB), outF, NULL);
Out2dPres = outF;
};
}
-void HYDROData_DTM::GetProperties( const Handle_HYDROData_Profile& theProfile,
+void HYDROData_DTM::GetProperties( const Handle(HYDROData_Profile)& theProfile,
gp_Pnt& theLowestPoint, gp_Vec2d& theDir,
- bool isNormalDir,
double& theZMin, double& theZMax )
{
theLowestPoint = theProfile->GetBottomPoint();
theProfile->GetRightPoint( aRight, true, true );
double x = aRight.X()-aLeft.X();
double y = aRight.Y()-aLeft.Y();
- if( isNormalDir )
- theDir = gp_Vec2d( -y, x );
- else
- theDir = gp_Vec2d( x, y );
+ theDir = gp_Vec2d( x, y );
HYDROData_Profile::ProfilePoints points = theProfile->GetProfilePoints();
int lo = points.Lower();
aLast2d = To2D( aLastPnt, theTr, theUMin, theUMax );
gp_Vec2d dir( aFirst2d, aLast2d );
- Handle_Geom2d_Line aLine2d = new Geom2d_Line( aFirst2d, gp_Dir2d( dir.X(), dir.Y() ) );
+ Handle(Geom2d_Line) aLine2d = new Geom2d_Line( aFirst2d, gp_Dir2d( dir.X(), dir.Y() ) );
return new Geom2d_TrimmedCurve( aLine2d, 0, aLast2d.Distance( aFirst2d ) );
}
return Handle(Geom2d_Curve)();
}
-Handle_Geom2d_BSplineCurve HYDROData_DTM::CreateHydraulicAxis(
- const std::vector<Handle_HYDROData_Profile>& theProfiles,
+#include <GCE2d_MakeSegment.hxx>
+#include <Geom2dAPI_InterCurveCurve.hxx>
+bool IsCooriented( const Handle(HYDROData_Profile)& theProfile1,
+ const Handle(HYDROData_Profile)& theProfile2 )
+{
+ if( theProfile1==theProfile2 )
+ return true;
+
+ gp_XY lp1, rp1, lp2, rp2;
+ theProfile1->GetLeftPoint(lp1);
+ theProfile1->GetRightPoint(rp1);
+ theProfile2->GetLeftPoint(lp2);
+ theProfile2->GetRightPoint(rp2);
+
+ GCE2d_MakeSegment s1(lp1, lp2);
+ GCE2d_MakeSegment s2(rp1, rp2);
+
+ Geom2dAPI_InterCurveCurve inter;
+ inter.Init(s1.Value(), s2.Value());
+ if (inter.NbPoints() == 0)
+ return true;
+ else
+ return false;
+}
+
+Handle(Geom2d_BSplineCurve) HYDROData_DTM::CreateHydraulicAxis(
+ const std::vector<Handle(HYDROData_Profile)>& theProfiles,
std::vector<double>& theDistances )
{
size_t n = theProfiles.size();
+ if( n==1 )
+ return Handle_Geom2d_BSplineCurve();
+
Handle_Geom2d_BSplineCurve aResult;
Handle(TColgp_HArray1OfPnt2d) points = new TColgp_HArray1OfPnt2d( 1, (int)n );
TColgp_Array1OfVec2d tangents( 1, (int)n );
Handle(TColStd_HArray1OfBoolean) flags = new TColStd_HArray1OfBoolean( 1, (int)n );
- for( size_t i = 1; i <= n; i++ )
+ // Stage 1. Orient all profiles to be co-oriented with the first profile
+ theProfiles[0]->Update();
+ for( size_t i = 1; i < n; i++ )
{
- Handle_HYDROData_Profile aProfile = theProfiles[i-1];
+ Handle(HYDROData_Profile) aProfile = theProfiles[i];
+ Handle(HYDROData_Profile) aPrevProfile = theProfiles[i-1];
+
+ if( !IsCooriented( aProfile, aPrevProfile ) )
+ {
+ gp_XY lp, rp;
+ aProfile->GetLeftPoint( lp, true );
+ aProfile->GetRightPoint( rp, true );
+ aProfile->SetLeftPoint( rp, true );
+ aProfile->SetRightPoint( lp, true );
+ }
aProfile->Update();
+ }
+
+ // Stage 2. Calculate normals so that each normal "points" to the next profile
+ for( size_t i = 0; i < n; i++ )
+ {
+ Handle(HYDROData_Profile) aProfile = theProfiles[i];
+ Handle(HYDROData_Profile) aNextProfile = i==n-1 ? theProfiles[i-1] : theProfiles[i+1];
gp_Pnt aLowest;
- gp_Vec2d aTangent;
+ gp_Vec2d aNormal;
double zmin, zmax;
- GetProperties( aProfile, aLowest, aTangent, true, zmin, zmax );
- aTangent.Normalize();
- points->SetValue( (int)i, gp_Pnt2d( aLowest.X(), aLowest.Y() ) );
- tangents.SetValue( (int)i, aTangent );
- flags->SetValue( (int)i, Standard_True );
+ gp_XYZ curP = aProfile->GetBottomPoint(true);
+ gp_XY curP2d = gp_XY(curP.X(), curP.Y());
+
+ gp_XYZ nextP = aNextProfile->GetBottomPoint(true);
+ gp_XY nextP2d = gp_XY(nextP.X(), nextP.Y());
+
+ gp_Vec2d aPrTangent;
+ GetProperties( aProfile, aLowest, aPrTangent, zmin, zmax );
+ aNormal.SetCoord( -aPrTangent.Y(), aPrTangent.X() );
+
+ gp_Vec2d aDirToNextProfile(nextP2d.X() - curP2d.X(), nextP2d.Y() - curP2d.Y() );
+ if( i==n-1 )
+ aDirToNextProfile.Reverse();
+
+ if (aNormal.Dot(aDirToNextProfile) < 0)
+ aNormal.Reverse();
+
+ aNormal.Normalize();
+
+ points->SetValue( (int)(i+1), gp_Pnt2d( aLowest.X(), aLowest.Y() ) );
+ tangents.SetValue( (int)(i+1), aNormal );
+ flags->SetValue( (int)(i+1), Standard_True );
}
Geom2dAPI_Interpolate anInterpolator( points, Standard_False, Standard_False );
return aResult;
}
-std::vector<Handle_Geom2d_Curve> HYDROData_DTM::ProfileToParametric(
- const Handle_HYDROData_Profile& theProfile,
+std::vector<Handle(Geom2d_Curve)> HYDROData_DTM::ProfileToParametric(
+ const Handle(HYDROData_Profile)& theProfile,
double& theUMin, double& theUMax, gp_Vec2d& theDir )
{
- std::vector<Handle_Geom2d_Curve> curves;
+ std::vector<Handle(Geom2d_Curve)> curves;
// Transformation of the coordinate systems
gp_Pnt aLowest;
double zmin, zmax;
- GetProperties( theProfile, aLowest, theDir, false, zmin, zmax );
+ GetProperties( theProfile, aLowest, theDir, zmin, zmax );
gp_Ax3 aStd3d( gp_Pnt( 0, 0, 0 ), gp_Dir( 0, 0, 1 ), gp_Dir( 1, 0, 0 ) );
gp_Ax3 aLocal( gp_Pnt( aLowest.X(), aLowest.Y(), 0 ), gp_Dir( 0, 0, 1 ), gp_Dir( theDir.X(), theDir.Y(), 0 ) );
return true;
}
-void HYDROData_DTM::ProfileDiscretization( const Handle_HYDROData_Profile& theProfile,
- double theXCurv, double theMinZ, double theMaxZ, double theDDZ,
+void HYDROData_DTM::ProfileDiscretization( const Handle(HYDROData_Profile)& theProfile,
+ double theXCurv, double theMinZ, double theMaxZ, double theTopZ, double theDDZ,
CurveUZ& theMidPointCurve,
CurveUZ& theWidthCurve,
int& intersection_nb,
aVMax = 1000000;
gp_Vec2d aProfileDir;
- std::vector<Handle_Geom2d_Curve> curves = ProfileToParametric( theProfile, aUMin, aUMax, aProfileDir );
+ std::vector<Handle(Geom2d_Curve)> curves = ProfileToParametric( theProfile, aUMin, aUMax, aProfileDir );
size_t n = curves.size();
if( n==0 )
curves.push_back( aT2 );
int psize = ( int )( ( theMaxZ-theMinZ ) / theDDZ + 1 );
- theMidPointCurve = CurveUZ( theXCurv, aProfileDir, theMinZ );
+ theMidPointCurve = CurveUZ( theXCurv, aProfileDir, theMinZ, theTopZ);
theMidPointCurve.reserve( psize );
- theWidthCurve = CurveUZ( theXCurv, aProfileDir, theMinZ );
+ theWidthCurve = CurveUZ( theXCurv, aProfileDir, theMinZ, theTopZ );
theWidthCurve.reserve( psize );
n = curves.size();
std::set<double> intersections;
for( size_t i = 0; i < n; i++ )
{
- Handle_Geom2d_Curve aCurve = curves[i];
+ Handle(Geom2d_Curve) aCurve = curves[i];
Geom2dAPI_InterCurveCurve anIntersect( aCurve, aLine, theTolerance );
for( int k=1, m=anIntersect.NbPoints(); k<=m; k++ )
intersections.insert( anIntersect.Point( k ).X() );
theInterpolation.push_back( theCurveB );
}
#include <BRepLib_MakeEdge2d.hxx>
-void HYDROData_DTM::CurveTo3D( const Handle_Geom2d_BSplineCurve& theHydraulicAxis,
+void HYDROData_DTM::CurveTo3D( const Handle(Geom2d_BSplineCurve)& theHydraulicAxis,
const CurveUZ& theMidCurve, const CurveUZ& theWidthCurve,
AltitudePoints& thePoints )
{
size_t n = theMidCurve.size();
std::map<double, AltitudePoint> sorted_points;
- for( size_t i=0; i<n; i++ )
+ bool isOnTop = false;
+ for( size_t i=0; i<n; i++ ) // build the two banks of the interpolated profile, from bottom to top
{
double param1 = theMidCurve[i].U - theWidthCurve[i].U / 2;
double param2 = theMidCurve[i].U + theWidthCurve[i].U / 2;
gp_Pnt2d p1 = point.Translated( param1 * profile_dir);
gp_Pnt2d p2 = point.Translated( param2 * profile_dir);
- double z = theMidCurve[i].Z + theMidCurve.DeltaZ();
-
- AltitudePoint p3d_1( p1.X(), p1.Y(), z ), p3d_2( p2.X(), p2.Y(), z );
-
- sorted_points[param1] = p3d_1;
- sorted_points[param2] = p3d_2;
+ bool arrivedOnTop = false;
+ double z = 0;
+ if (theMidCurve[i].Z <= theMidCurve.MaxZ())
+ z = theMidCurve[i].Z + theMidCurve.DeltaZ();
+ else
+ {
+ z = theMidCurve.MaxZ() + theMidCurve.DeltaZ(); // limit z to linear interpolation between maxima on extremity profiles
+ arrivedOnTop = true; // do not keep points after this one
+ }
+ if (!isOnTop)
+ {
+ AltitudePoint p3d_1( p1.X(), p1.Y(), z ), p3d_2( p2.X(), p2.Y(), z );
+
+ sorted_points[param1] = p3d_1;
+ sorted_points[param2] = p3d_2;
+ }
+ //if (arrivedOnTop)
+ // isOnTop =true; // do not keep points after this one (commented: leads to strange limits of 2D shape)
}
thePoints.reserve( sorted_points.size() );
+ const double EPS = 1E-12;
std::map<double, AltitudePoint>::const_iterator it = sorted_points.begin(), last = sorted_points.end();
for( ; it!=last; it++ )
- thePoints.push_back( it->second );
+ if( thePoints.empty() || thePoints.back().SquareDistance( it->second ) > EPS )
+ thePoints.push_back( it->second );
}
inline double max( double a, double b )
#include <BRepLib_MakeWire.hxx>
std::vector<HYDROData_Bathymetry::AltitudePoints> HYDROData_DTM::Interpolate
- ( const Handle_Geom2d_BSplineCurve& theHydraulicAxis,
- const Handle_HYDROData_Profile& theProfileA,
+ ( const Handle(Geom2d_BSplineCurve)& theHydraulicAxis,
+ const Handle(HYDROData_Profile)& theProfileA,
double theXCurvA,
- const Handle_HYDROData_Profile& theProfileB,
+ const Handle(HYDROData_Profile)& theProfileB,
double theXCurvB,
double theDDZ, int theNbSteps, bool isAddSecond,
int& inter_nb_1, int& inter_nb_2)
gp_Pnt lowestA, lowestB;
gp_Vec2d dirA, dirB;
- GetProperties( theProfileA, lowestA, dirA, false, zminA, zmaxA );
- GetProperties( theProfileB, lowestB, dirB, false, zminB, zmaxB );
+ GetProperties( theProfileA, lowestA, dirA, zminA, zmaxA );
+ GetProperties( theProfileB, lowestB, dirB, zminB, zmaxB );
double hmax = max( zmaxA-zminA, zmaxB-zminB );
//double zmin = min( zminA, zminB );
//double zmax = max( zmaxA, zmaxB );
- CurveUZ midA(0, gp_Vec2d(), 0), midB(0, gp_Vec2d(), 0);
- CurveUZ widA(0, gp_Vec2d(), 0), widB(0, gp_Vec2d(), 0);
+ CurveUZ midA(0, gp_Vec2d(), 0, 0), midB(0, gp_Vec2d(), 0, 0);
+ CurveUZ widA(0, gp_Vec2d(), 0, 0), widB(0, gp_Vec2d(), 0, 0);
- ProfileDiscretization( theProfileA, theXCurvA, zminA, zminA+hmax, theDDZ, midA, widA, inter_nb_1 );
- ProfileDiscretization( theProfileB, theXCurvB, zminB, zminB+hmax, theDDZ, midB, widB, inter_nb_2 );
+ ProfileDiscretization( theProfileA, theXCurvA, zminA, zminA+hmax, zmaxA-zminA, theDDZ, midA, widA, inter_nb_1 );
+ ProfileDiscretization( theProfileB, theXCurvB, zminB, zminB+hmax, zmaxB-zminB, theDDZ, midB, widB, inter_nb_2 );
std::vector<CurveUZ> mid, wid;
Interpolate( midA, midB, theNbSteps, mid, isAddSecond );
}
HYDROData_Bathymetry::AltitudePoints HYDROData_DTM::Interpolate
- ( const std::vector<Handle_HYDROData_Profile>& theProfiles,
+ ( const std::vector<Handle(HYDROData_Profile)>& theProfiles,
double theDDZ, double theSpatialStep,
AltitudePoints& theLeft,
AltitudePoints& theRight,
return points;
std::vector<double> distances;
- Handle_Geom2d_BSplineCurve aHydraulicAxis = CreateHydraulicAxis( theProfiles, distances );
+ Handle(Geom2d_BSplineCurve) aHydraulicAxis = CreateHydraulicAxis( theProfiles, distances );
if( aHydraulicAxis.IsNull() )
return points;
return points;
}
-int HYDROData_DTM::EstimateNbPoints( const std::vector<Handle_HYDROData_Profile>& theProfiles,
+int HYDROData_DTM::EstimateNbPoints( const std::vector<Handle(HYDROData_Profile)>& theProfiles,
double theDDZ, double theSpatialStep )
{
size_t n = theProfiles.size();
return 1 << 20;
std::vector<double> distances;
- Handle_Geom2d_BSplineCurve aHydraulicAxis = CreateHydraulicAxis( theProfiles, distances );
+ Handle(Geom2d_BSplineCurve) aHydraulicAxis = CreateHydraulicAxis( theProfiles, distances );
if( aHydraulicAxis.IsNull() )
return 0;
gp_Pnt aLowest;
gp_Vec2d aDir;
double aZMin, aZMax;
- GetProperties( theProfiles[0], aLowest, aDir, true, aZMin, aZMax );
+ GetProperties( theProfiles[0], aLowest, aDir, aZMin, aZMax );
int aNbZSteps = (aZMax-aZMin)/theDDZ;
if( aNbSteps > ( 1<<16 ) || aNbZSteps > ( 1<<16 ) )