#include "HYDROData_Projection.h"
#include "HYDROData_ShapesGroup.h"
#include "HYDROData_ShapesTool.h"
+#include "HYDROData_Pipes.h"
#include <BRepOffsetAPI_MakePipeShell.hxx>
#include <BRepOffsetAPI_MakePipe.hxx>
#include <QColor>
#include <QStringList>
-#define PYTHON_CHANNEL_ID "KIND_CHANNEL"
-
IMPLEMENT_STANDARD_HANDLE(HYDROData_Channel,HYDROData_ArtificialObject)
IMPLEMENT_STANDARD_RTTIEXT(HYDROData_Channel,HYDROData_ArtificialObject)
QStringList HYDROData_Channel::DumpToPython( MapOfTreatedObjects& theTreatedObjects ) const
{
- QStringList aResList;
+ QStringList aResList = dumpObjectCreation( theTreatedObjects );
+ QString aName = GetObjPyName();
- Handle(HYDROData_Document) aDocument = HYDROData_Document::Document( myLab );
- if ( aDocument.IsNull() )
- return aResList;
+ Handle(HYDROData_Polyline3D) aRefGideLine = GetGuideLine();
+ setPythonReferenceObject( theTreatedObjects, aResList, aRefGideLine, "SetGuideLine" );
- QString aDocName = aDocument->GetDocPyName();
- QString aChannelName = GetName();
+ Handle(HYDROData_Profile) aRefProfile = GetProfile();
+ setPythonReferenceObject( theTreatedObjects, aResList, aRefProfile, "SetProfile" );
- aResList << QString( "%1 = %2.CreateObject( %3 );" )
- .arg( aChannelName ).arg( aDocName ).arg( PYTHON_CHANNEL_ID );
- aResList << QString( "%1.SetName( \"%2\" );" )
- .arg( aChannelName ).arg( aChannelName );
aResList << QString( "" );
-
- // TODO
+ aResList << QString( "%1.Update();" ).arg( aName );
+ aResList << QString( "" );
return aResList;
}
if(aProfileWire.IsNull())
return;
- BRepOffsetAPI_MakePipeShell aMkSweep(aPathWire);
- aMkSweep.Add(aProfileWire,Standard_True, Standard_True);
- aMkSweep.SetTransitionMode(BRepBuilderAPI_RightCorner);
- //aMkSweep.SetMode(Standard_True);
- aMkSweep.Build();
- if(aMkSweep.IsDone()) {
- const TopoDS_Shape& aChannel = aMkSweep.Shape();
- BRepCheck_Analyzer aCheck(aChannel);
- if(aCheck.IsValid())
- {
- //BRepTools::Write(aChannel, "ChanV.brep");
- SetShape3D( aMkSweep.Shape());
- } else {
#ifdef DEB_CHANNEL
- cout <<"NOT VALID" <<endl;
- BRepTools::Write(aChannel, "ChanNV.brep");
+ BRepTools::Write( aPathWire, "guideline.brep" );
+ BRepTools::Write( aProfileWire, "profile.brep" );
#endif
- }
- }
- TopoDS_Shape a3dShape = GetShape3D();
- if ( a3dShape.IsNull() )
+ HYDROData_Canal3dAnd2d aChannelConstructor( aProfileWire, aPathWire );
+ if( aChannelConstructor.GetStatus() != 0 )
return;
- // build 2d shape -- temporary solution!!
- TopoDS_Face aProj = HYDROData_Projection::MakeProjection( a3dShape );
- SetTopShape( aProj );
- if ( aProj.IsNull() )
- return;
-
- // Create the channel groups
- TopoDS_Shape aFirstShape = aMkSweep.FirstShape();
- TopoDS_Shape aLastShape = aMkSweep.LastShape();
- if ( aFirstShape.IsNull() || aFirstShape.ShapeType() != TopAbs_WIRE ||
- aLastShape.IsNull() || aLastShape.ShapeType() != TopAbs_WIRE )
- return;
+ aChannelConstructor.Create3dPresentation();
+ aChannelConstructor.Create2dPresentation();
+ SetShape3D( aChannelConstructor.Get3dPresentation() );
+ SetTopShape( aChannelConstructor.Get2dPresentation() );
- TopoDS_Wire anInletWire = TopoDS::Wire( aFirstShape );
- TopoDS_Wire anOutletWire = TopoDS::Wire( aLastShape );
+#ifdef DEB_CHANNEL
+ BRepTools::Write( aChannelConstructor.Get2dPresentation(), "channel2d.brep" );
+ BRepTools::Write( aChannelConstructor.Get3dPresentation(), "channel3d.brep" );
+#endif
- TopoDS_Vertex anInletFirstVert, anInletLastVert;
- TopExp::Vertices( anInletWire, anInletFirstVert, anInletLastVert );
+ TopAbs_ShapeEnum aType = GetTopShape().ShapeType();
- const TopTools_ListOfShape& aGeneratedLeftEdges = aMkSweep.Generated( anInletFirstVert );
- const TopTools_ListOfShape& aGeneratedRightEdges = aMkSweep.Generated( anInletLastVert );
+ // Create groups for channel
+ TopoDS_Wire aLeftBank = aChannelConstructor.GetLeftBank();
+ TopoDS_Wire aRightBank = aChannelConstructor.GetRightBank();
+ TopoDS_Wire anInlet = aChannelConstructor.GetInlet();
+ TopoDS_Wire anOutlet = aChannelConstructor.GetOutlet();
- TopTools_SequenceOfShape aProjEdges;
- HYDROData_ShapesTool::ExploreShapeToShapes( aProj, TopAbs_EDGE, aProjEdges );
+#ifdef DEB_CHANNEL
+ HYDROData_ShapesTool::DumpShapeSubShapes( std::cout, "Top shape edges:", GetTopShape(), TopAbs_EDGE );
+ HYDROData_ShapesTool::DumpShapeSubShapes( std::cout, "Left bank edges:", aLeftBank, TopAbs_EDGE );
+ HYDROData_ShapesTool::DumpShapeSubShapes( std::cout, "Right bank edges:", aRightBank, TopAbs_EDGE );
+ HYDROData_ShapesTool::DumpShapeSubShapes( std::cout, "Inlet edges:", anInlet, TopAbs_EDGE );
+ HYDROData_ShapesTool::DumpShapeSubShapes( std::cout, "Outlet edges:", anOutlet, TopAbs_EDGE );
+#endif
- TopTools_SequenceOfShape aProjLeftEdges;
- findEdges( aProjEdges, aGeneratedLeftEdges, aProjLeftEdges );
+ TopTools_SequenceOfShape aLeftBankEdges;
+ HYDROData_ShapesTool::ExploreShapeToShapes( aLeftBank, TopAbs_EDGE, aLeftBankEdges );
- TopTools_SequenceOfShape aProjRightEdges;
- findEdges( aProjEdges, aGeneratedRightEdges, aProjRightEdges );
+ TopTools_SequenceOfShape aRightBankEdges;
+ HYDROData_ShapesTool::ExploreShapeToShapes( aRightBank, TopAbs_EDGE, aRightBankEdges );
- TopTools_SequenceOfShape aProjInletEdges;
- findEdges( aProjEdges, anInletWire, aProjInletEdges );
+ TopTools_SequenceOfShape anInletEdges;
+ HYDROData_ShapesTool::ExploreShapeToShapes( anInlet, TopAbs_EDGE, anInletEdges );
- TopTools_SequenceOfShape aProjOutletEdges;
- findEdges( aProjEdges, anOutletWire, aProjOutletEdges );
+ TopTools_SequenceOfShape anOutletEdges;
+ HYDROData_ShapesTool::ExploreShapeToShapes( anOutlet, TopAbs_EDGE, anOutletEdges );
QString aLeftGroupName = GetName() + "_Left_Bank";
Handle(HYDROData_ShapesGroup) aLeftGroup = createGroupObject();
aLeftGroup->SetName( aLeftGroupName );
- aLeftGroup->SetShapes( aProjLeftEdges );
+ aLeftGroup->SetShapes( aLeftBankEdges );
QString aRightGroupName = GetName() + "_Right_Bank";
Handle(HYDROData_ShapesGroup) aRightGroup = createGroupObject();
aRightGroup->SetName( aRightGroupName );
- aRightGroup->SetShapes( aProjRightEdges );
+ aRightGroup->SetShapes( aRightBankEdges );
QString anInGroupName = GetName() + "_Inlet";
Handle(HYDROData_ShapesGroup) anInGroup = createGroupObject();
anInGroup->SetName( anInGroupName );
- anInGroup->SetShapes( aProjInletEdges );
+ anInGroup->SetShapes( anInletEdges );
QString anOutGroupName = GetName() + "_Outlet";
Handle(HYDROData_ShapesGroup) anOutGroup = createGroupObject();
anOutGroup->SetName( anOutGroupName );
- anOutGroup->SetShapes( aProjOutletEdges );
+ anOutGroup->SetShapes( anOutletEdges );
}
QColor HYDROData_Channel::DefaultFillingColor()
return KIND_OBSTACLE_ALTITUDE;
}
-void HYDROData_Channel::findEdges( const TopTools_SequenceOfShape& theInShapes,
- const TopTools_ListOfShape& theEdges3D,
- TopTools_SequenceOfShape& theOutShapes ) const
-{
- theOutShapes.Clear();
- if ( theEdges3D.IsEmpty() || theInShapes.IsEmpty() )
- return;
-
- const TopoDS_Shape& aFirstShape3D = theEdges3D.First();
- const TopoDS_Shape& aLastShape3D = theEdges3D.Last();
-
- TopoDS_Vertex aFirstVert, aLastVert, aDummyVert;
- if ( !HYDROData_ShapesTool::Vertices( aFirstShape3D, aFirstVert, aDummyVert ) ||
- !HYDROData_ShapesTool::Vertices( aLastShape3D, aDummyVert, aLastVert ) )
- return;
-
- bool isStarted = false;
- for ( int i = 1, n = theInShapes.Length(); i <= n; ++i )
- {
- const TopoDS_Shape& anInShape = theInShapes.Value( i );
-
- TopoDS_Vertex aShapeFirstVert, aShapeLastVert;
- if ( !HYDROData_ShapesTool::Vertices( anInShape, aShapeFirstVert, aShapeLastVert ) )
- continue;
-
- if ( !isStarted )
- {
- isStarted = HYDROData_ShapesTool::IsVerticesEquals( aFirstVert, aShapeFirstVert, true );
- }
-
- if ( isStarted )
- {
- theOutShapes.Append( anInShape );
-
- if ( HYDROData_ShapesTool::IsVerticesEquals( aLastVert, aShapeLastVert, true ) )
- break;
- }
- }
-}
-
-void HYDROData_Channel::findEdges( const TopTools_SequenceOfShape& theProjShapes,
- const TopoDS_Shape& theEdge3D,
- TopTools_SequenceOfShape& theOutShapes ) const
-{
- TopTools_ListOfShape aTmpList;
- aTmpList.Append( theEdge3D );
- findEdges( theProjShapes, aTmpList, theOutShapes );
-}
-