//#include "CurveCreator_NewPointDlg.h"
#include "CurveCreator_NewSectionDlg.h"
#include "CurveCreator_Utils.h"
+#include "CurveCreator_UtilsICurve.hxx"
#include "CurveCreator_TableView.h"
#include <SUIT_Session.h>
#include <OCCViewer_ViewManager.h>
#include <OCCViewer_ViewPort3d.h>
#include "OCCViewer_Utilities.h"
-#include "OCCViewer_ViewWidget.h"
#include <BRep_Tool.hxx>
#include <TopoDS.hxx>
Qt::WindowFlags fl)
: QWidget(parent), myNewSectionEditor(NULL), myCurve(theCurve), mySection(0),
myDragStarted( false ), myDragInteractionStyle( SUIT_ViewModel::STANDARD ),
- myOCCViewer( 0 ), myOCCViewWidget( 0 )
+ myOCCViewer( 0 )
{
myNewSectionEditor = new CurveCreator_NewSectionDlg( this );
myNewSectionEditor->hide();
return myOCCViewer;
}
-/**
- * Set an OCC viewer
- */
-void CurveCreator_Widget::setOCCViewWidget( OCCViewer_ViewWidget* theViewWidget )
-{
- if ( myOCCViewWidget == theViewWidget )
- return;
-
- if ( myOCCViewWidget ) {
- disconnect( myOCCViewWidget, SIGNAL( mousePressed( QMouseEvent* ) ),
- this, SLOT( onMousePress( QMouseEvent* ) ) );
- disconnect( myOCCViewWidget, SIGNAL( mouseReleased( QMouseEvent* ) ),
- this, SLOT( onMouseRelease( QMouseEvent* ) ) );
- disconnect( myOCCViewWidget, SIGNAL( mouseMoving( QMouseEvent* ) ),
- this, SLOT( onMouseMove( QMouseEvent* ) ) );
- //disconnect( myOCCViewWidget, SIGNAL( lastViewClosed( SUIT_ViewManager* ) ),
- // this, SLOT( onLastViewClosed( SUIT_ViewManager* ) ) );
-
- // restore normal mode in the viewer
- OCCViewer_Utilities::setViewWidget2DMode( myOCCViewWidget, OCCViewer_ViewWidget::No2dMode );
- // all local contexts should be closed if the viewer is not more used
- setLocalPointContext( false, true );
- }
-
- myOCCViewWidget = theViewWidget;
- if ( myOCCViewWidget ) {
- connect( myOCCViewWidget, SIGNAL( mousePressed( QMouseEvent* ) ),
- this, SLOT( onMousePress( QMouseEvent* ) ) );
- connect( myOCCViewWidget, SIGNAL( mouseReleased( QMouseEvent* ) ),
- this, SLOT( onMouseRelease( QMouseEvent* ) ) );
- connect( myOCCViewWidget, SIGNAL( mouseMoving( QMouseEvent* ) ),
- this, SLOT( onMouseMove( QMouseEvent* ) ) );
- //connect( aViewManager, SIGNAL( lastViewClosed( SUIT_ViewManager* ) ),
- // this, SLOT( onLastViewClosed( SUIT_ViewManager* ) ) );
- OCCViewer_Utilities::setViewWidget2DMode( myOCCViewWidget, OCCViewer_ViewWidget::XYPlane );
- }
-}
-
-/**
- * Returns current OCC viewer
- */
-OCCViewer_ViewWidget* CurveCreator_Widget::getOCCViewWidget()
-{
- return myOCCViewWidget;
-}
-
/**
* Returns OCC viewer context
*/
OCCViewer_Viewer* aViewer = getOCCViewer();
if ( aViewer )
aContext = aViewer->getAISContext();
- else if ( myOCCViewWidget )
- aContext = myOCCViewWidget->getAISContext();
return aContext;
}
OCCViewer_Viewer* aViewer = getOCCViewer();
if ( aViewer )
aViewPort = ((OCCViewer_ViewWindow*)aViewer->getViewManager()->getActiveView())->getViewPort();
- else if ( myOCCViewWidget )
- aViewPort = myOCCViewWidget->getViewPort();
return aViewPort;
}
OCCViewer_Viewer* aViewer = getOCCViewer();
if ( aViewer )
aViewer->setObjectsSelected(theList);
- else if ( myOCCViewWidget ) {
- Handle(AIS_InteractiveContext) aContext = myOCCViewWidget->getAISContext();
-
- AIS_ListIteratorOfListOfInteractive aIt;
- for (aIt.Initialize(theList); aIt.More(); aIt.Next())
- aContext->AddOrRemoveSelected(aIt.Value(), false);
- aContext->UpdateCurrentViewer();
- }
}
//=======================================================================
return;
Handle(AIS_InteractiveContext) aContext = getAISContext();
- if( !myCurve || !aContext )
+ if( !myCurve || aContext.IsNull() )
return;
mySection= -1;
if( !myCurve )
return;
- CurveCreator_Widget::SectionToPointList aPoints;
+ CurveCreator_ICurve::SectionToPointList aPoints;
startCurveModification( aPoints, false );
myCurve->undo();
finishCurveModification();
{
if( !myCurve )
return;
- CurveCreator_Widget::SectionToPointList aPoints;
+ CurveCreator_ICurve::SectionToPointList aPoints;
startCurveModification( aPoints, false );
myCurve->redo();
finishCurveModification();
if ( pe->modifiers() != Qt::ControlModifier ) {
Handle(AIS_InteractiveContext) ic = getAISContext();
- if ( !ic )
+ if ( ic.IsNull() )
return;
gp_Pnt aPnt;
if ( myDragStarted ) {
bool isDragged = myDragged;
- CurveCreator_Widget::SectionToPointList aDraggedPoints;
+ CurveCreator_ICurve::SectionToPointList aDraggedPoints;
if ( myDragged )
aDraggedPoints = myDragPoints;
if ( aPntIndex < 0 )
return;
- SectionToPointList aSelPoints;
+ CurveCreator_ICurve::SectionToPointList aSelPoints;
startCurveModification( aSelPoints );
double aX = myLocalPointView->item( theRow, 2 )->data( Qt::UserRole ).toDouble();
*/
void CurveCreator_Widget::removePoint()
{
- SectionToPointList aPoints;
+ CurveCreator_ICurve::SectionToPointList aPoints;
getSelectedPonts( aPoints );
if ( aPoints.size() == 0 )
return;
- SectionToPointList aSelPoints;
+ CurveCreator_ICurve::SectionToPointList aSelPoints;
startCurveModification( aSelPoints, false );
myCurve->removeSeveralPoints( aPoints );
- finishCurveModification( SectionToPointList() );
+ finishCurveModification( CurveCreator_ICurve::SectionToPointList() );
}
void CurveCreator_Widget::insertPointToSelectedSegment( const int theX,
const int theY )
{
Handle(AIS_InteractiveContext) aContext = getAISContext();
- if ( !aContext )
+
+ OCCViewer_ViewPort3d* aViewPort = getViewPort();
+ Handle(V3d_View) aView;
+ if ( aViewPort )
+ aView = aViewPort->getView();
+
+ if ( aContext.IsNull() || aView.IsNull() )
return;
gp_Pnt aPoint;
gp_Pnt aPoint1, aPoint2;
- bool isFoundPoint = false;
-
- for ( aContext->InitSelected(); aContext->MoreSelected() && !isFoundPoint;
- aContext->NextSelected() ) {
- TopoDS_Shape aTShape = aContext->SelectedShape();
- if ( !aTShape.IsNull() && aTShape.ShapeType() == TopAbs_VERTEX )
- continue;
- else {
- Handle(SelectMgr_EntityOwner) anOwner = aContext->SelectedOwner();
- if ( anOwner.IsNull() )
- continue;
- const TopLoc_Location& aLocation = anOwner->Location();
- Handle(AIS_InteractiveObject) anAIS = Handle(AIS_InteractiveObject)::DownCast( anOwner->Selectable() );
- isFoundPoint = pointOnObject( anAIS, theX, theY, aPoint, aPoint1, aPoint2 );
- }
- }
+ bool isFoundPoint = CurveCreator_Utils::getNeighbourPoints( aContext, aView, theX, theY,
+ aPoint, aPoint1, aPoint2 );
if ( !isFoundPoint )
return;
// insert the point to the model curve
- SectionToPointList aSelPoints;
+ CurveCreator_ICurve::SectionToPointList aSelPoints;
startCurveModification( aSelPoints );
CurveCreator::Coordinates aCoords;
aCoords.push_back( aPoint.X() );
aCoords.push_back( aPoint.Y() );
- SectionToPointList aPoints1, aPoints2;
+ CurveCreator_ICurve::SectionToPointList aPoints1, aPoints2;
findSectionsToPoints( aPoint1.X(), aPoint1.Y(), aPoints1 );
findSectionsToPoints( aPoint2.X(), aPoint2.Y(), aPoints2 );
- SectionToPointList::const_iterator anIt = aPoints1.begin(), aLast = aPoints1.end();
+ CurveCreator_ICurve::SectionToPointList::const_iterator anIt = aPoints1.begin(),
+ aLast = aPoints1.end();
int aSectionId = -1;
// there can be a case when a new point is added into two sections
int aPoint1Id = -1, aPoint2Id = -1;
for ( ; anIt != aLast && aSectionId < 0; anIt++ ) {
int aSectionCur = anIt->first;
- SectionToPointList::const_iterator anIt2 = aPoints2.begin(), aLast2 = aPoints2.end();
+ CurveCreator_ICurve::SectionToPointList::const_iterator anIt2 = aPoints2.begin(),
+ aLast2 = aPoints2.end();
for ( ; anIt2 != aLast2 && aSectionId < 0; anIt2++ ) {
if ( anIt2->first == aSectionCur ) {
aSectionId = aSectionCur;
if ( !aViewPort )
return;
- SectionToPointList aPoints;
+ CurveCreator_ICurve::SectionToPointList aPoints;
startCurveModification( aPoints, false );
gp_Pnt aStartPnt = CurveCreator_Utils::ConvertClickToPoint( myDragStartPosition.x(),
CurveCreator_ICurve::SectionToPointCoordsList aCoordList;
std::deque<float> aChangedPos;
- SectionToPointList::const_iterator anIt = myDragPoints.begin(), aLast = myDragPoints.end();
+ CurveCreator_ICurve::SectionToPointList::const_iterator anIt = myDragPoints.begin(),
+ aLast = myDragPoints.end();
for ( ; anIt != aLast; anIt++ ) {
int aSectionId = anIt->first;
int aPointId = anIt->second;
if ( myDragStarted )
return;
Handle(AIS_InteractiveContext) aContext = getAISContext();
- if ( !aContext )
+ if ( aContext.IsNull() )
return;
+ std::list<float> aSelectedList = CurveCreator_Utils::getSelectedPoints( aContext );
+
+ std::list<float>::const_iterator anIt = aSelectedList.begin(), aLast = aSelectedList.end();
+
bool isBlocked = myLocalPointView->blockSignals(true);
- gp_Pnt aPnt;
myLocalPointView->setRowCount( 0 );
- for ( aContext->InitSelected(); aContext->MoreSelected(); aContext->NextSelected() ) {
- TopoDS_Vertex aVertex;
- TopoDS_Shape aShape = aContext->SelectedShape();
- if ( !aShape.IsNull() && aShape.ShapeType() == TopAbs_VERTEX )
- aVertex = TopoDS::Vertex( aContext->SelectedShape() );
- else {
- Handle(SelectMgr_EntityOwner) anOwner = aContext->SelectedOwner();
- if ( !anOwner.IsNull() ) {
- Handle(AIS_InteractiveObject) anAIS = Handle(AIS_InteractiveObject)::DownCast( anOwner->Selectable() );
- if ( !anAIS.IsNull() ) {
- Handle(AIS_Point) aPoint = Handle(AIS_Point)::DownCast( anAIS);
- if ( !aPoint.IsNull() )
- aVertex = TopoDS::Vertex( aPoint->Vertex() );
- }
- if ( aVertex.IsNull() ) {
- // the following happens if there are no points in the current curve, there is only a shape
- /*Handle(StdSelect_BRepOwner) aBrepOwner = Handle(StdSelect_BRepOwner)::DownCast(anOwner);
- if ( aBrepOwner.IsNull() )
- continue;
- if ( aBrepOwner->HasShape() ) {
- const TopoDS_Shape& aShape = aBrepOwner->Shape();
- if ( !aShape.IsNull() && aShape.ShapeType() == TopAbs_VERTEX )
- {
- aVertex = TopoDS::Vertex( aShape );
- }
- }*/
- }
- }
- }
- if ( aVertex.IsNull() )
- continue;
- aPnt = BRep_Tool::Pnt( aVertex );
- addLocalPointToTable( aPnt.X(), aPnt.Y() );
+ for ( ; anIt != aLast; anIt++ )
+ {
+ float aX = *anIt;
+ anIt++;
+ float anY = *anIt;
+ anIt++;
+ float aZ = *anIt;
+ addLocalPointToTable( aX, anY );
}
myLocalPointView->blockSignals(isBlocked);
}
*/
void CurveCreator_Widget::setLocalPointContext( const bool theOpen, const bool isUpdateTable )
{
- Handle(AIS_InteractiveContext) ic = getAISContext();
- if ( !ic )
- return;
-
- if ( theOpen ) {
- // Open local context if there is no one
- if ( !ic->HasOpenedContext() ) {
- ic->ClearCurrents( false );
- ic->OpenLocalContext( false/*use displayed objects*/, true/*allow shape decomposition*/ );
- }
- AIS_ListOfInteractive aList;
- ic->DisplayedObjects( aList );
- int aLSize = 0;
- for ( AIS_ListIteratorOfListOfInteractive it( aList ); it.More(); it.Next() )
- aLSize++;
-
- for ( AIS_ListIteratorOfListOfInteractive it( aList ); it.More(); it.Next() )
- {
- Handle(AIS_InteractiveObject) anAIS = it.Value();
- if ( !anAIS.IsNull() )
- {
- if ( anAIS->IsKind( STANDARD_TYPE( AIS_Shape ) ) )
- {
- ic->Load( anAIS, -1/*selection mode*/, true/*allow decomposition*/ );
- ic->Activate( anAIS, AIS_Shape::SelectionMode( (TopAbs_ShapeEnum)TopAbs_WIRE ) );
- //ic->Activate( anAIS, AIS_Shape::SelectionMode( (TopAbs_ShapeEnum)TopAbs_VERTEX ) );
- }
- else if ( anAIS->DynamicType() != STANDARD_TYPE(AIS_Trihedron) )
- {
- ic->Load( anAIS, -1/*selection mode*/, false/*allow decomposition*/ );
- ic->Activate( anAIS, TopAbs_VERTEX );
- }
- }
- continue;
- }
- }
- else {
- if ( ic->HasOpenedContext() )
- ic->CloseAllContexts();
- if ( isUpdateTable )
- updateLocalPointView();
- }
+ CurveCreator_Utils::setLocalPointContext( getAISContext(), theOpen );
+ if ( !theOpen && isUpdateTable )
+ updateLocalPointView();
}
void CurveCreator_Widget::addLocalPointToTable( const double theX, const double theY )
{
- SectionToPointList aPoints;
+ CurveCreator_ICurve::SectionToPointList aPoints;
findSectionsToPoints( theX, theY, aPoints );
- SectionToPointList aSkipList;
+ CurveCreator_ICurve::SectionToPointList aSkipList;
// table could not contain two equal value rows
int aRowId = myLocalPointView->rowCount();
double aCurrentX, aCurrentY;
int aSectionId, aPointId;
- SectionToPoint aPoint;
+ CurveCreator_ICurve::SectionToPoint aPoint;
for ( int i = 0; i < aRowId; i++ ) {
aCurrentX = myLocalPointView->item( i, 2 )->data( Qt::UserRole ).toDouble();
aCurrentY = myLocalPointView->item( i, 3 )->data( Qt::UserRole ).toDouble();
return;
QTableWidgetItem* anItem;
- SectionToPointList::const_iterator anIt = aPoints.begin(), aLast = aPoints.end();
+ CurveCreator_ICurve::SectionToPointList::const_iterator anIt = aPoints.begin(),
+ aLast = aPoints.end();
for ( ; anIt != aLast; anIt++ ) {
aPoint = *anIt;
if ( contains( aSkipList, aPoint ) )
myDragged = false;
}
-void CurveCreator_Widget::getSelectedPonts( CurveCreator_Widget::SectionToPointList& thePoints )
+void CurveCreator_Widget::getSelectedPonts( CurveCreator_ICurve::SectionToPointList& thePoints )
{
thePoints.clear();
for ( int i = 0, aNb = myLocalPointView->rowCount(); i < aNb; i++ )
thePoints.push_back( std::make_pair( getSectionId( i ), getPointId( i ) ) );
}
-void CurveCreator_Widget::setSelectedPonts( const CurveCreator_Widget::SectionToPointList& thePoints )
+void CurveCreator_Widget::setSelectedPonts( const CurveCreator_ICurve::SectionToPointList& thePoints )
{
if ( myDragStarted )
return;
Handle(AIS_InteractiveContext) ic = getAISContext();
- if ( !ic || !ic->HasOpenedContext() )
+ if ( ic.IsNull() || !ic->HasOpenedContext() )
return;
AIS_ListOfInteractive aListToSelect;
+
AIS_ListOfInteractive aDisplayedList;
ic->DisplayedObjects( aDisplayedList );
- SectionToPointList::const_iterator anIt = thePoints.begin(), aLast = thePoints.end();
- SectionToPoint aSToPoint;
+ CurveCreator_ICurve::SectionToPointList::const_iterator anIt = thePoints.begin(),
+ aLast = thePoints.end();
+ CurveCreator_ICurve::SectionToPoint aSToPoint;
for( ; anIt != aLast; anIt++ ) {
aSToPoint = *anIt;
gp_Pnt aPnt = BRep_Tool::Pnt( aVertex );
- SectionToPointList aPoints;
+ CurveCreator_ICurve::SectionToPointList aPoints;
findSectionsToPoints( aPnt.X(), aPnt.Y(), aPoints );
- SectionToPointList::const_iterator anIt = aPoints.begin(), aLast = aPoints.end();
- SectionToPoint aPoint;
+ CurveCreator_ICurve::SectionToPointList::const_iterator anIt = aPoints.begin(),
+ aLast = aPoints.end();
+ CurveCreator_ICurve::SectionToPoint aPoint;
for ( ; anIt != aLast; anIt++ ) {
aPoint = *anIt;
if ( aPoint.first == aSToPoint.first && aPoint.second == aSToPoint.second )
}
}
}
+ if ( thePoints.size() > 0 && aListToSelect.First() == aListToSelect.Last() ) {
+ /*TopExp_Explorer aExpF(myShape,TopAbs_FACE);
+ for (; aExpF.More(); aExpF.Next())
+ {
+ const TopoDS_Face& aFace = TopoDS::Face(aExpF.Current());
+ }*/
+ }
+
ic->ClearSelected( Standard_False );
setObjectsSelected( aListToSelect );
* \param theFillPoints a flag whether the selection list should be filled
*/
void CurveCreator_Widget::startCurveModification(
- CurveCreator_Widget::SectionToPointList& thePoints,
+ CurveCreator_ICurve::SectionToPointList& thePoints,
const bool theFillPoints )
{
if ( theFillPoints ) {
* \param thePoints a list of curve selected points
*/
void CurveCreator_Widget::finishCurveModification(
- const CurveCreator_Widget::SectionToPointList& thePoints )
+ const CurveCreator_ICurve::SectionToPointList& thePoints )
{
if ( getActionMode() == ModificationMode )
setLocalPointContext( true );
*/
int CurveCreator_Widget::findLocalPointIndex( int theSectionId, float theX, float theY )
{
- int aPntIndex = -1;
-
- CurveCreator::Coordinates aCoords;
- for ( int i = 0, aNb = myCurve->getNbPoints( theSectionId ); i < aNb && aPntIndex < 0; i++ ) {
- aCoords = myCurve->getPoint( theSectionId, i );
- if ( aCoords.size() < 2 )
- continue;
- if ( fabs( aCoords[0] - theX ) < LOCAL_SELECTION_TOLERANCE &&
- fabs( aCoords[1] - theY ) < LOCAL_SELECTION_TOLERANCE )
- aPntIndex = i;
- }
-
- return aPntIndex;
+ return CurveCreator_UtilsICurve::findLocalPointIndex( myCurve, theSectionId, theX, theY );
}
void CurveCreator_Widget::findSectionsToPoints( const double theX, const double theY,
- CurveCreator_Widget::SectionToPointList& thePoints )
+ CurveCreator_ICurve::SectionToPointList& thePoints )
{
- thePoints.clear();
-
- int aPointId = -1;
- for ( int i = 0, aNb = myCurve->getNbSections(); i < aNb; i++ ) {
- aPointId = findLocalPointIndex( i, theX, theY );
- if ( aPointId < 0 )
- continue;
- SectionToPoint aPoint = std::make_pair( i, aPointId );
- if ( !contains( thePoints, aPoint ) )
- thePoints.push_back( aPoint );
- }
+ return CurveCreator_UtilsICurve::findSectionsToPoints( myCurve, theX, theY, thePoints );
}
-void CurveCreator_Widget::convert( const SectionToPointList& thePoints,
+void CurveCreator_Widget::convert( const CurveCreator_ICurve::SectionToPointList& thePoints,
QMap<int, QList<int> >& theConvPoints )
{
- theConvPoints.clear();
-
- SectionToPointList::const_iterator anIt = thePoints.begin(), aLast = thePoints.end();
- QList<int> aPoints;
- int aSectionId, aPointId;
- for ( ; anIt != aLast; anIt++ ) {
- aSectionId = anIt->first;
- aPointId = anIt->second;
- aPoints.clear();
- if ( theConvPoints.contains( aSectionId ) )
- aPoints = theConvPoints[aSectionId];
- if ( aPoints.contains( aPointId ) )
- continue;
- aPoints.append( aPointId );
- theConvPoints[aSectionId] = aPoints;
- }
-}
-
-/**
- * Checks whether the point belongs to the OCC object
- * \param theObject a line or shape with a bspline inside
- * \param theX the X coordinate in the view.
- * \param theY the Y coordinate in the view.
- * \param thePoint the output point to be append to the model curve
- * \param thePoint1 the output point to bound the line where a new point should be inserted
- * \param thePoint2 the output point to bound the line where a new point should be inserted
- */
-bool CurveCreator_Widget::pointOnObject( Handle(AIS_InteractiveObject) theObject,
- const int theX, const int theY,
- gp_Pnt& thePoint,
- gp_Pnt& thePoint1, gp_Pnt& thePoint2 )
-{
- bool isFound = false;
-
- Handle(AIS_InteractiveContext) aContext = getAISContext();
- if ( theObject.IsNull() || !aContext )
- return isFound;
-
- gp_Pnt aPoint;
- Standard_Real aParameter;
- gp_Pnt aPnt1, aPnt2;
- Handle(AIS_Line) aLine = Handle(AIS_Line)::DownCast( theObject );
- if ( !aLine.IsNull() ) {
- const Handle(Geom_Line) aGLine = aLine->Line();
- isFound = hasProjectPointOnCurve( theX, theY, aGLine, aParameter );
- if ( isFound ) {
- aPoint = aGLine->Value( aParameter );
-
- Handle(Geom_Point) aPStart;
- Handle(Geom_Point) aPEnd;
- aLine->Points( aPStart, aPEnd );
- aPnt1 = aPStart->Pnt();
- aPnt2 = aPEnd->Pnt();
-
- // in case of Geom line a projection is performed to the infinite line,
- // so it is necessary to bound it by the line size
- Bnd_Box aLineBox;
- aLineBox.Set( aPnt1, gp_Vec( aPnt1, aPnt2 ) );
- isFound = !aLineBox.IsOut( aPoint );
- }
- }
- else {
- Handle(AIS_Shape) aShape = Handle(AIS_Shape)::DownCast( theObject );
- if ( !aShape.IsNull() ) {
- const TopoDS_Wire& aWire = TopoDS::Wire( aShape->Shape() );
- if ( !aWire.IsNull() ) {
- TopExp_Explorer anExp( aWire, TopAbs_EDGE );
- for ( ; anExp.More(); anExp.Next())
- {
- const TopoDS_Edge& anEdge = TopoDS::Edge(anExp.Current());
- if ( !anEdge.IsNull() ) {
- Standard_Real aFirst, aLast;
- Handle(Geom_Curve) aCurve = BRep_Tool::Curve( anEdge, aFirst, aLast );
-
- if ( aCurve->IsKind( STANDARD_TYPE(Geom_BSplineCurve) ) ) {
- Handle(Geom_BSplineCurve) aBSplineCurve = Handle(Geom_BSplineCurve)::DownCast( aCurve );
- if ( !aBSplineCurve.IsNull() ) {
- isFound = hasProjectPointOnCurve( theX, theY, aCurve, aParameter );
- if ( isFound ) {
- aPoint = aBSplineCurve->Value( aParameter );
- Standard_Integer anI1, anI2;
- aBSplineCurve->LocateU( aParameter, LOCAL_SELECTION_TOLERANCE, anI1, anI2 );
-
- aPnt1 = aBSplineCurve->Value( aBSplineCurve->Knot( anI1 ) );
- aPnt2 = aBSplineCurve->Value( aBSplineCurve->Knot( anI2 ) );
- }
- }
- }
- }
- }
- }
- }
- }
- if ( isFound ) {
- thePoint = aPoint;
- thePoint1 = aPnt1;
- thePoint2 = aPnt2;
- }
- return isFound;
-}
-
-/**
- * Returns whether the clicked point belong to the curve or has a very near projection
- * \param theX the X coordinate of a point clicked in the OCC viewer
- * \param theY the Y coordinate of a point clicked in the OCC viewer
- * \param theCurve a geometry curve
- * \param theOutPoint a found projected point on the curve
- */
-bool CurveCreator_Widget::hasProjectPointOnCurve( const int theX, const int theY,
- const Handle(Geom_Curve)& theCurve,
- Standard_Real& theParameter )
-{
- bool isFound = false;
- OCCViewer_ViewPort3d* aViewPort = getViewPort();
- if ( !aViewPort )
- return isFound;
-
- Handle(V3d_View) aView = aViewPort->getView();
- gp_Pnt aPoint = CurveCreator_Utils::ConvertClickToPoint( theX, theY, aView );
-
- GeomAPI_ProjectPointOnCurve aProj( aPoint, theCurve );
- Standard_Integer aNbPoint = aProj.NbPoints();
- if (aNbPoint > 0) {
- for (Standard_Integer j = 1; j <= aNbPoint && !isFound; j++) {
- gp_Pnt aNewPoint = aProj.Point( j );
- theParameter = aProj.Parameter( j );
-
- int aX, anY;
- CurveCreator_Utils::ConvertPointToClick( aNewPoint, aView, aX, anY );
-
- int aXDelta = abs( aX - theX );
- int anYDelta = abs( anY - theY );
- isFound = aXDelta < SCENE_PIXEL_TOLERANCE && anYDelta < SCENE_PIXEL_TOLERANCE;
- }
- }
- return isFound;
+ return CurveCreator_UtilsICurve::convert( thePoints, theConvPoints );
}
/**
* \param theList a container of values
* \param theValue a value
*/
-bool CurveCreator_Widget::contains( const CurveCreator_Widget::SectionToPointList& theList,
- const CurveCreator_Widget::SectionToPoint& theValue ) const
+bool CurveCreator_Widget::contains( const CurveCreator_ICurve::SectionToPointList& theList,
+ const CurveCreator_ICurve::SectionToPoint& theValue ) const
{
- bool isFound = false;
-
- SectionToPointList::const_iterator anIt = theList.begin(), aLast = theList.end();
- for ( ; anIt != aLast && !isFound; anIt++ )
- isFound = anIt->first == theValue.first && anIt->second == theValue.second;
-
- return isFound;
+ return CurveCreator_UtilsICurve::contains( theList, theValue );
}