#include "CurveCreator_Widget.h"
#include "CurveCreator_TreeView.h"
#include "CurveCreator_ICurve.hxx"
-//#include "CurveCreator_CurveEditor.hxx"
#include "CurveCreator.hxx"
-//#include "CurveCreator_NewPointDlg.h"
#include "CurveCreator_NewSectionDlg.h"
#include "CurveCreator_Utils.h"
#include "CurveCreator_UtilsICurve.hxx"
#include <OCCViewer_ViewPort3d.h>
#include "OCCViewer_Utilities.h"
-#include <BRep_Tool.hxx>
-#include <TopoDS.hxx>
-#include <TopoDS_Vertex.hxx>
-#include <TopoDS_Wire.hxx>
-#include <TopoDS_Edge.hxx>
-#include <gp_Lin.hxx>
-#include <gp_Dir.hxx>
-#include <TopExp_Explorer.hxx>
-
-#include <GeomAPI_ProjectPointOnCurve.hxx>
-
-#include <AIS_ListOfInteractive.hxx>
-#include <AIS_ListIteratorOfListOfInteractive.hxx>
-#include <AIS_Shape.hxx>
-#include <AIS_Point.hxx>
-#include <AIS_Line.hxx>
-#include <Geom_Point.hxx>
-#include <Geom_BSplineCurve.hxx>
-#include <Geom_Line.hxx>
-#include <StdSelect_BRepOwner.hxx>
-
#include <QHBoxLayout>
#include <QVBoxLayout>
#include <QLabel>
#include <QMouseEvent>
#include <QApplication>
#include <QTableWidget>
+#include <QTime>
+
+//#define MEASURE_TIME
+
+#ifdef MEASURE_TIME
+
+ #define START_MEASURE_TIME \
+ QTime aTimer; \
+ aTimer.start(); \
+
+ #define END_MEASURE_TIME( theMsg ) \
+ double aTime = aTimer.elapsed() * 0.001; \
+ FILE* aFile = fopen( "performance", "a" ); \
+ fprintf( aFile, "%s = %.3lf sec\n", theMsg, aTime ); \
+ fclose( aFile ); \
+
+#else
+
+ #define START_MEASURE_TIME
+ #define END_MEASURE_TIME( theMsg )
+
+#endif
+
+
+
+
-const double LOCAL_SELECTION_TOLERANCE = 0.0001;
CurveCreator_Widget::CurveCreator_Widget(QWidget* parent,
CurveCreator_ICurve *theCurve,
- Qt::WindowFlags fl)
+ const int theActionFlags,
+ const QStringList& theCoordTitles,
+ Qt::WindowFlags fl,
+ int theLocalPointRowLimit )
: QWidget(parent), myNewSectionEditor(NULL), myCurve(theCurve), mySection(0),
myDragStarted( false ), myDragInteractionStyle( SUIT_ViewModel::STANDARD ),
- myOCCViewer( 0 )
+ myOCCViewer( 0 ), myLocalPointRowLimit( theLocalPointRowLimit )
{
- myNewSectionEditor = new CurveCreator_NewSectionDlg( this );
+ bool isToEnableClosed = !( theActionFlags & DisableClosedSection );
+ myNewSectionEditor = new CurveCreator_NewSectionDlg( this, isToEnableClosed );
myNewSectionEditor->hide();
connect( myNewSectionEditor, SIGNAL(addSection()), this, SLOT(onAddNewSection()) );
connect( myNewSectionEditor, SIGNAL(modifySection()), this, SLOT(onModifySection()) );
QGroupBox* aSectionGroup = new QGroupBox(tr("Sections"),this);
mySectionView = new CurveCreator_TreeView(myCurve, aSectionGroup);
+ mySectionView->setSelectionMode( QTreeView::ExtendedSelection );
connect( mySectionView, SIGNAL(selectionChanged()), this, SLOT( onSelectionChanged() ) );
connect( mySectionView, SIGNAL(sectionEntered(int)), this, SLOT(onEditSection(int)) );
connect( mySectionView, SIGNAL(customContextMenuRequested(QPoint)), this, SLOT(onContextMenu(QPoint)) );
- myLocalPointView = new CurveCreator_TableView( myCurve, this );
+ myLocalPointView = new CurveCreator_TableView( myCurve, this, theCoordTitles );
connect( myLocalPointView, SIGNAL( cellChanged( int, int ) ),
this, SLOT( onCellChanged( int, int ) ) );
aTB->addAction(anAct);
aTB->addSeparator();
-
+
anAct = createAction( NEW_SECTION_ID, tr("NEW_SECTION"), aNewSectionPixmap, tr("NEW_SECTION_TLT"),
QKeySequence(Qt::ControlModifier|Qt::Key_N) );
connect(anAct, SIGNAL(triggered()), this, SLOT(onNewSection()) );
- aTB->addAction(anAct);
- aTB->addSeparator();
+ if ( !(theActionFlags & DisableNewSection) ) {
+ aTB->addAction(anAct);
+ aTB->addSeparator();
+ }
anAct = createAction( ADDITION_MODE_ID, tr("ADDITION_MODE"), aNewPointPixmap, tr("ADDITION_MODE_TLT"),
QKeySequence() );
anAct->setCheckable(true);
connect(anAct, SIGNAL(triggered(bool)), this, SLOT(onDetectionMode(bool)) );
connect(anAct, SIGNAL(toggled(bool)), this, SLOT(onModeChanged(bool)) );
- aTB->addAction(anAct);
-
+ if ( !(theActionFlags & DisableDetectionMode) ) {
+ aTB->addAction(anAct);
+ }
+
anAct = createAction( CLOSE_SECTIONS_ID, tr("CLOSE_SECTIONS"), QPixmap(), tr("CLOSE_SECTIONS_TLT"),
QKeySequence(Qt::ControlModifier|Qt::Key_W) );
connect(anAct, SIGNAL(triggered()), this, SLOT(onCloseSections()) );
QKeySequence(Qt::ControlModifier|Qt::Key_Delete ) );
connect(anAct, SIGNAL(triggered()), this, SLOT(onRemove()) );
aTB->addAction(anAct);
- // TODO join
- //aTB->addSeparator();
+
+ aTB->addSeparator();
- //anAct = createAction( JOIN_ID, tr("JOIN"), aJoinPixmap, tr("JOIN_TLT"),
- // QKeySequence(Qt::ControlModifier|Qt::Key_Plus ) );
- //connect( anAct, SIGNAL(triggered()), this, SLOT(onJoin()) );
- //aTB->addAction(anAct);
+ anAct = createAction( JOIN_ID, tr("JOIN"), aJoinPixmap, tr("JOIN_TLT"),
+ QKeySequence(Qt::ControlModifier|Qt::Key_Plus ) );
+ connect( anAct, SIGNAL(triggered()), this, SLOT(onJoin()) );
+ aTB->addAction(anAct);
anAct = createAction( CLEAR_ALL_ID, tr("CLEAR_ALL"), QPixmap(), tr("CLEAR_ALL_TLT"),
QKeySequence(Qt::ControlModifier | Qt::ShiftModifier | Qt::Key_Delete ) );
connect( anAct, SIGNAL(triggered()), this, SLOT( onClearAll()) );
- // TODO join
- //anAct = createAction( JOIN_ALL_ID, tr("JOIN_ALL"), QPixmap(), tr("JOIN_ALL_TLT"),
- // QKeySequence(Qt::ControlModifier | Qt::ShiftModifier | Qt::Key_Plus ) );
- //connect( anAct, SIGNAL(triggered()), this, SLOT(onJoinAll()) );
+ anAct = createAction( JOIN_ALL_ID, tr("JOIN_ALL"), QPixmap(), tr("JOIN_ALL_TLT"),
+ QKeySequence(Qt::ControlModifier | Qt::ShiftModifier | Qt::Key_Plus ) );
+ connect( anAct, SIGNAL(triggered()), this, SLOT(onJoinAll()) );
QVBoxLayout* aSectLayout = new QVBoxLayout();
aSectLayout->setMargin( 5 );
return aPrevStyle;
}
-/**
- * Set interaction style in the OCC viewer
- * \param theStyle a new style
- * \return the previous style
- */
-void CurveCreator_Widget::setObjectsSelected(const AIS_ListOfInteractive& theList)
-{
- OCCViewer_Viewer* aViewer = getOCCViewer();
- if ( aViewer )
- aViewer->setObjectsSelected(theList);
-}
-
//=======================================================================
// function: reset
// purpose: reset the widget viewer, close local context, clear selection
if ( removeEnabled() )
anEnabledAct << REMOVE_ID;
QList<int> aSelSections = mySectionView->getSelectedSections();
- QList< QPair< int, int > > aSelPoints = mySectionView->getSelectedPoints();
CurveCreator_TreeView::SelectionType aSelType = mySectionView->getSelectionType();
switch( aSelType ){
case CurveCreator_TreeView::ST_NOSEL:{
}
break;
case ModificationMode: {
- anEnabledAct << CLOSE_SECTIONS_ID << UNCLOSE_SECTIONS_ID << SET_SECTIONS_POLYLINE_ID << SET_SECTIONS_SPLINE_ID;
+ if ( myNewSectionEditor->isEnableClosed() )
+ anEnabledAct << CLOSE_SECTIONS_ID << UNCLOSE_SECTIONS_ID;
+ anEnabledAct << SET_SECTIONS_POLYLINE_ID << SET_SECTIONS_SPLINE_ID;
int aSectCnt = myCurve->getNbSections();
if( aSectCnt > 0 )
anEnabledAct << CLEAR_ALL_ID;
- // TODO
- //if( aSectCnt > 1 )
- // anEnabledAct << JOIN_ALL_ID;
- //if( aSelSections.size() > 1 ){
- // anEnabledAct << JOIN_ID;
- //}
+ if( aSectCnt > 1 )
+ anEnabledAct << JOIN_ALL_ID;
+ if( aSelSections.size() > 1 ){
+ anEnabledAct << JOIN_ID;
+ }
}
break;
case DetectionMode: {
}
break;
case NoneMode:
+ {
+ int aSectCnt = myCurve->getNbSections();
+ if( aSectCnt > 1 )
+ anEnabledAct << JOIN_ALL_ID;
+ if( aSelSections.size() > 1 )
+ anEnabledAct << JOIN_ID;
+ }
+ break;
default:
break;
}
if( (myCurve->getNbSections() + myCurve->getNbPoints()) > 0 ){
anEnabledAct << REMOVE_ALL_ID;
}*/
- // TODO
- //if( myCurve->getNbSections() > 1 ){
- // anEnabledAct << JOIN_ALL_ID;
- //}
+ if( myCurve->getNbSections() > 1 ){
+ anEnabledAct << JOIN_ALL_ID;
+ }
}
QList<ActionId> anIds = myActionMap.keys();
for( int i = 0 ; i < anIds.size() ; i++ ){
if( aSelSection.size() > 0 ){
mySection = aSelSection[0];
}
- else{
- QList< QPair<int,int> > aSelPoints = mySectionView->getSelectedPoints();
- if( aSelPoints.size() > 0 ){
- mySection = aSelPoints[0].first;
- myPointNum = aSelPoints[0].second + 1;
- }
- }
// emit subOperationStarted( myNewPointEditor );
}
setLocalPointContext( aMode == ModificationMode, true );
}
-void CurveCreator_Widget::onAddNewPoint(const CurveCreator::Coordinates& theCoords)
-{
- if( !myCurve )
- return;
- //myCurve->addPoints(theCoords, mySection, myPointNum );
- //mySectionView->pointsAdded( mySection, myPointNum );
- //myPointNum++;
- QList<int> aSections = mySectionView->getSelectedSections();
- if( aSections.size() == 0 ){
- return;
- }
- int aSection = aSections[0];
- myCurve->addPoints(theCoords, aSection); // add to the end of section
- mySectionView->pointsAdded( aSection, myCurve->getNbPoints( aSection ) );
- updateActionsStates();
- updateUndoRedo();
-}
-
void CurveCreator_Widget::onNewSection()
{
if( !myCurve )
return;
+
+ stopActionMode();
myNewSectionEditor->clear();
myNewSectionEditor->setEditMode(false);
QString aSectName = QString( CurveCreator_UtilsICurve::getUniqSectionName( myCurve ).c_str() );
myNewSectionEditor->setSectionParameters(aSectName, true, CurveCreator::Polyline );
- emit subOperationStarted( myNewSectionEditor );
+ emit subOperationStarted( myNewSectionEditor, false );
}
void CurveCreator_Widget::onAddNewSection()
return anAct;
}
-QAction* CurveCreator_Widget::getAction(ActionId theId)
+QAction* CurveCreator_Widget::getAction( ActionId theId )
{
if( myActionMap.contains(theId) )
return myActionMap[theId];
return NULL;
}
-CurveCreator_Widget::ActionMode CurveCreator_Widget::getActionMode() const
+QAction* CurveCreator_Widget::getAction( ActionMode theMode )
{
- ActionMode aMode = NoneMode;
-
- if ( myActionMap[ADDITION_MODE_ID]->isChecked() )
- aMode = AdditionMode;
- else if ( myActionMap[MODIFICATION_MODE_ID]->isChecked() )
- aMode = ModificationMode;
- else if ( myActionMap[DETECTION_MODE_ID]->isChecked() )
- aMode = DetectionMode;
-
- return aMode;
+ ActionId anActionId = NONE_ID;
+ switch ( theMode ) {
+ case AdditionMode:
+ anActionId = ADDITION_MODE_ID;
+ break;
+ case ModificationMode:
+ anActionId = MODIFICATION_MODE_ID;
+ break;
+ case DetectionMode:
+ anActionId = DETECTION_MODE_ID;
+ break;
+ default:
+ break;
+ }
+ QAction* anAction = 0;
+ if ( anActionId != NONE_ID && myActionMap.contains( anActionId ) )
+ anAction = myActionMap[anActionId];
+ return anAction;
}
void CurveCreator_Widget::onEditSection( int theSection )
{
if( !myCurve )
return;
+
+ stopActionMode();
mySection = theSection;
QString aSectName = QString::fromStdString( myCurve->getSectionName(theSection));
bool isClosed = myCurve->isClosed(theSection);
myNewSectionEditor->setEditMode(true);
myNewSectionEditor->setSectionParameters( aSectName, isClosed, aType );
- emit subOperationStarted( myNewSectionEditor );
+ emit subOperationStarted( myNewSectionEditor, true );
}
void CurveCreator_Widget::onModifySection()
QString aName = myNewSectionEditor->getName();
bool isClosed = myNewSectionEditor->isClosed();
CurveCreator::SectionType aSectType = myNewSectionEditor->getSectionType();
-// myCurve->startOperation();
if( myCurve->getSectionName(mySection) != aName.toStdString() )
myCurve->setSectionName( mySection , aName.toStdString() );
if( myCurve->isClosed(mySection) != isClosed )
myCurve->setClosed( mySection, isClosed );
-// myCurve->finishOperation();
mySectionView->sectionChanged(mySection);
updateUndoRedo();
onCancelSection();
}
-/*void CurveCreator_Widget::onEditPoint( int theSection, int thePoint )
-{
- if( !myNewPointEditor || !myEdit )
- return;
- mySection = theSection;
- myPointNum = thePoint;
- QString aSectName = QString::fromStdString( myCurve->getSectionName(theSection));
- myNewPointEditor->setEditMode(true);
- myNewPointEditor->setSectionName(aSectName);
- myNewPointEditor->setDimension( myCurve->getDimension() );
- CurveCreator::Coordinates aCoords = myCurve->getCoordinates(theSection,thePoint);
- myNewPointEditor->setCoordinates(aCoords);
- emit subOperationStarted( myNewPointEditor );
-}
-
-void CurveCreator_Widget::onModifyPoint()
-{
- if( !myEdit )
- return;
- CurveCreator::Coordinates aCoords = myNewPointEditor->getCoordinates();
- myEdit->setCoordinates( aCoords, mySection, myPointNum );
- mySectionView->pointDataChanged( mySection, myPointNum );
- updateUndoRedo();
- onCancelPoint();
-}*/
-
void CurveCreator_Widget::onJoin()
{
if( !myCurve )
if( aSections.size() == 0 ){
return;
}
- int aMainSect = aSections[0];
- int aMainSectSize = myCurve->getNbPoints(aMainSect);
-// myCurve->startOperation();
- for( int i = 1 ; i < aSections.size() ; i++ ){
- int aSectNum = aSections[i] - (i-1);
- myCurve->join( aMainSect, aSectNum );
- mySectionView->sectionsRemoved( aSectNum );
+ stopActionMode();
+
+ std::list<int> aSectionsToJoin;
+ for( int i = 0; i < aSections.size() ; i++ ){
+ aSectionsToJoin.push_back( aSections[i] );
+ }
+ //int aMainSect = aSectionsToJoin.front();
+ //int aMainSectSize = myCurve->getNbPoints(aMainSect);
+ if ( myCurve->join( aSectionsToJoin ) )
+ {
+ std::list<int>::const_iterator anIt = aSectionsToJoin.begin(),
+ aLast = aSectionsToJoin.end();
+ // the first section should be skipped. It is not removed, but is modified
+ anIt++;
+ for ( ; anIt != aLast; anIt++ )
+ mySectionView->sectionsRemoved( *anIt );
}
-// myCurve->finishOperation();
+
+ /* The update for the points of the main section
int aNewSectSize = myCurve->getNbPoints(aMainSect);
if( aNewSectSize != aMainSectSize )
- mySectionView->pointsAdded( aMainSect, aMainSectSize, aNewSectSize-aMainSectSize );
+ mySectionView->pointsAdded( aMainSect, aMainSectSize, aNewSectSize-aMainSectSize );*/
updateUndoRedo();
}
{
if( !myCurve )
return;
+ stopActionMode();
myCurve->clear();
mySectionView->reset();
updateActionsStates();
{
if( !myCurve )
return;
- myCurve->join();
+ stopActionMode();
+
+ std::list<int> aSectionsToJoin;
+ for( int i = 0, aNb = myCurve->getNbSections(); i < aNb ; i++ ){
+ aSectionsToJoin.push_back( i );
+ }
+ bool aRes = myCurve->join( aSectionsToJoin );
+
mySectionView->reset();
updateActionsStates();
updateUndoRedo();
{
if( !myCurve )
return;
+ stopActionMode();
QList<int> aSelSections = mySectionView->getSelectedSections();
-// myCurve->startOperation();
for( int i = 0 ; i < aSelSections.size() ; i++ ){
myCurve->setSectionType(aSelSections[i], CurveCreator::Spline );
mySectionView->sectionChanged(aSelSections[i]);
}
-// myCurve->finishOperation();
updateUndoRedo();
}
{
if( !myCurve )
return;
-// myCurve->startOperation();
+ stopActionMode();
QList<int> aSelSections = mySectionView->getSelectedSections();
for( int i = 0 ; i < aSelSections.size() ; i++ ){
myCurve->setSectionType( aSelSections[i], CurveCreator::Polyline );
mySectionView->sectionChanged( aSelSections[i] );
}
-// myCurve->finishOperation();
updateUndoRedo();
}
{
if( !myCurve )
return;
-// myCurve->startOperation();
+ stopActionMode();
QList<int> aSelSections = mySectionView->getSelectedSections();
for( int i = 0 ; i < aSelSections.size() ; i++ ){
myCurve->setClosed(aSelSections[i], true);
mySectionView->sectionChanged(aSelSections[i]);
}
-// myCurve->finishOperation();
updateUndoRedo();
}
{
if( !myCurve )
return;
-// myCurve->startOperation();
+ stopActionMode();
QList<int> aSelSections = mySectionView->getSelectedSections();
for( int i = 0 ; i < aSelSections.size() ; i++ ){
myCurve->setClosed(aSelSections[i], false);
mySectionView->sectionChanged(aSelSections[i]);
}
-// myCurve->finishOperation();
updateUndoRedo();
}
void CurveCreator_Widget::onContextMenu( QPoint thePoint )
{
QList<ActionId> aContextActions;
- aContextActions << CLEAR_ALL_ID << JOIN_ALL_ID << SEPARATOR_ID <<
+ aContextActions << CLEAR_ALL_ID << JOIN_ID << JOIN_ALL_ID << SEPARATOR_ID <<
CLOSE_SECTIONS_ID << UNCLOSE_SECTIONS_ID << SET_SECTIONS_POLYLINE_ID <<
SET_SECTIONS_SPLINE_ID;
QPoint aGlPoint = mySectionView->mapToGlobal(thePoint);
return mySectionView->getSelectedSections();
}
-QList< QPair< int, int > > CurveCreator_Widget::getSelectedPoints()
+void CurveCreator_Widget::setSelectedSections( const QList<int>& theSections )
{
- return mySectionView->getSelectedPoints();
+ mySectionView->setSelectedSections( theSections );
+ updateActionsStates();
+ updateUndoRedo();
}
/**
return isEnabled;
}
+void CurveCreator_Widget::setActionMode( const ActionMode& theMode )
+{
+ ActionMode aPrevMode = getActionMode();
+ QAction* aPrevAction = getAction( aPrevMode );
+ QAction* anAction = getAction( theMode );
+ switch ( theMode ) {
+ case NoneMode:
+ case AdditionMode: {
+ if ( aPrevAction ) {
+ if ( aPrevAction->isChecked() ) {
+ aPrevAction->setChecked( false );
+ }
+ }
+ if ( aPrevMode == ModificationMode )
+ onModificationMode( false );
+ if ( aPrevMode == AdditionMode )
+ onAdditionMode( false );
+
+ if ( theMode == AdditionMode )
+ {
+ anAction->setChecked( true );
+ onModeChanged( true );
+ }
+ }
+ break;
+ break;
+ case ModificationMode:
+ {
+ //TODO
+ }
+ break;
+ case DetectionMode:
+ break;
+ }
+}
+
+CurveCreator_Widget::ActionMode CurveCreator_Widget::getActionMode() const
+{
+ ActionMode aMode = NoneMode;
+
+ if ( myActionMap[ADDITION_MODE_ID]->isChecked() )
+ aMode = AdditionMode;
+ else if ( myActionMap[MODIFICATION_MODE_ID]->isChecked() )
+ aMode = ModificationMode;
+ else if ( myActionMap[DETECTION_MODE_ID]->isChecked() )
+ aMode = DetectionMode;
+
+ return aMode;
+}
//=================================================================================
-// function : GeometryGUI::onGetCoordsByClick()
+// function : GeometryGUI::addCoordsByClick()
// purpose : Manage mouse press events in Additon mode
//=================================================================================
-void CurveCreator_Widget::onGetCoordsByClick( QMouseEvent* pe )
+void CurveCreator_Widget::addCoordsByClick( QMouseEvent* pe )
{
if (pe->button() != Qt::LeftButton)
return;
else
ic->Select(); // New selection
- /*TopoDS_Shape aShape;
-
- ic->InitSelected();
- if ( ic->MoreSelected() )
- aShape = ic->SelectedShape();
-
- if ( !aShape.IsNull() && aShape.ShapeType() == TopAbs_VERTEX )
- aPnt = BRep_Tool::Pnt( TopoDS::Vertex( ic->SelectedShape() ) );
- else*/
{
OCCViewer_ViewPort3d* vp = getViewPort();
aPnt = CurveCreator_Utils::ConvertClickToPoint( pe->x(), pe->y(), vp->getView() );
if ( myCurve->getDimension() == 3 ) {
aCoords.push_back( aPnt.Z() );
}
- onAddNewPoint(aCoords);
-// myNewPointEditor->setCoordinates( aCoords );
+ addNewPoint(aCoords);
}
}
if ( theEvent->button() != Qt::LeftButton )
return;
+ myPressedX = theEvent->x();
+ myPressedY = theEvent->y();
+
switch( getActionMode() ) {
case ModificationMode: {
//store initial cursor position for Drag&Drop
break;
}
case AdditionMode: {
- onGetCoordsByClick( theEvent );
+ addCoordsByClick( theEvent );
break;
}
default:
if ( myDragStarted ) {
bool isDragged = myDragged;
CurveCreator_ICurve::SectionToPointList aDraggedPoints;
- if ( myDragged )
+ QMap<CurveCreator_ICurve::SectionToPoint, std::deque< float > > anInitialDragPointsCoords;
+ if ( myDragged ) {
aDraggedPoints = myDragPoints;
+ anInitialDragPointsCoords = myInitialDragPointsCoords;
+ }
setDragStarted( false );
- // if the drag of some points has happened, restore the drag selection
- if ( aDraggedPoints.size() > 0 )
- setSelectedPonts( aDraggedPoints );
+
+ if ( aDraggedPoints.size() > 0 ) {
+ // Collect old coordinates of the dragged points
+ CurveCreator_ICurve::SectionToPointCoordsList anOldPoints;
+ foreach ( const CurveCreator_ICurve::SectionToPoint aSectionToPoint, anInitialDragPointsCoords.keys() ) {
+ CurveCreator::Coordinates aCoords = anInitialDragPointsCoords.value( aSectionToPoint );
+ anOldPoints.push_back( std::make_pair( aSectionToPoint, aCoords ) );
+ }
+
+ if ( myCurve->canPointsBeSorted() ) {
+ // Add old coordinates of the curve points (except the dragged points) to the list
+ for( int aSectionId = 0 ; aSectionId < myCurve->getNbSections() ; aSectionId++ ) {
+ CurveCreator::Coordinates aCoords;
+ for ( int aPointId = 0, aNb = myCurve->getNbPoints( aSectionId ); aPointId < aNb; aPointId++ ) {
+ aCoords = myCurve->getPoint( aSectionId, aPointId );
+ if ( aCoords.size() < 2 ) {
+ continue;
+ }
+
+ CurveCreator_ICurve::SectionToPoint aSectionToPoint = std::make_pair( aSectionId, aPointId );
+
+ if ( !anInitialDragPointsCoords.contains( aSectionToPoint ) ) {
+ anOldPoints.push_back( std::make_pair( aSectionToPoint, aCoords ) );
+ }
+ }
+ }
+
+ // Apply points sorting
+ CurveCreator_ICurve::SectionToPointList aPoints;
+ startCurveModification( aPoints, false );
+
+ myCurve->setSkipSorting( false );
+
+ CurveCreator_ICurve::SectionToPointCoordsList aCoordList;
+ CurveCreator_ICurve::SectionToPointList::const_iterator anIt = aDraggedPoints.begin(),
+ aLast = aDraggedPoints.end();
+ for ( ; anIt != aLast; anIt++ ) {
+ int aSectionId = anIt->first;
+ int aPointId = anIt->second;
+ std::deque<float> aPos = myCurve->getPoint( aSectionId, aPointId );
+
+ aCoordList.push_back(
+ std::make_pair( std::make_pair( aSectionId, aPointId ), aPos ) );
+ }
+
+ myCurve->setSeveralPoints( aCoordList, false );
+
+ finishCurveModification( aDraggedPoints );
+ } else {
+ // if the drag of some points has happened, restore the drag selection
+ START_MEASURE_TIME;
+ setSelectedPoints( aDraggedPoints );
+ END_MEASURE_TIME( "drop" );
+ }
+
+ // Save drag difference
+ myCurve->saveCoordDiff( anOldPoints );
+ }
}
else // check whether the segment is clicked an a new point should be added to the segment
- insertPointToSelectedSegment( theEvent->pos().x(), theEvent->pos().y() );
+ {
+ int aReleasedX = theEvent->x();
+ int aReleasedY = theEvent->y();
+ if ( myPressedX == aReleasedX && myPressedY == aReleasedY )
+ insertPointToSelectedSegment( aReleasedX, aReleasedY );
+ }
// updates the input panel table to show the selected point coordinates
updateLocalPointView();
+ updateUndoRedo();
}
/**
if ( (aPos - myDragStartPosition).manhattanLength() < QApplication::startDragDistance() )
return;
+ START_MEASURE_TIME;
+
moveSelectedPoints( aPos.x(), aPos.y() );
myDragStartPosition = aPos;
+
+ END_MEASURE_TIME( "drag" );
}
/**
*/
void CurveCreator_Widget::removeSection()
{
- QList< QPair<int,int> > aSelPoints = mySectionView->getSelectedPoints();
- int aCurrSect=-1;
- int aRemoveCnt = 0;
-// myCurve->startOperation();
- for( int i = 0 ; i < aSelPoints.size() ; i++ ){
- if( aCurrSect != aSelPoints[i].first ){
- aRemoveCnt = 0;
- aCurrSect = aSelPoints[i].first;
- }
- int aPntIndx = aSelPoints[i].second - aRemoveCnt;
- myCurve->removePoint( aCurrSect, aPntIndx );
- mySectionView->pointsRemoved( aCurrSect, aPntIndx );
- aRemoveCnt++;
- }
+ stopActionMode();
+
QList<int> aSections = mySectionView->getSelectedSections();
for( int i = 0 ; i < aSections.size() ; i++ ){
int aSectNum = aSections[i] - (i);
myCurve->removeSection( aSectNum );
mySectionView->sectionsRemoved( aSectNum );
}
-// myCurve->finishOperation();
mySectionView->clearSelection();
updateUndoRedo();
}
void CurveCreator_Widget::removePoint()
{
CurveCreator_ICurve::SectionToPointList aPoints;
- getSelectedPonts( aPoints );
+ getSelectedPoints( aPoints );
if ( aPoints.size() == 0 )
return;
finishCurveModification( CurveCreator_ICurve::SectionToPointList() );
}
+void CurveCreator_Widget::addNewPoint(const CurveCreator::Coordinates& theCoords)
+{
+ if( !myCurve )
+ return;
+ QList<int> aSections = mySectionView->getSelectedSections();
+ if( aSections.size() == 0 ){
+ return;
+ }
+ int aSection = aSections[0];
+ myCurve->addPoints(theCoords, aSection); // add to the end of section
+ mySectionView->pointsAdded( aSection, myCurve->getNbPoints( aSection ) );
+ updateActionsStates();
+ updateUndoRedo();
+}
+
void CurveCreator_Widget::insertPointToSelectedSegment( const int theX,
const int theY )
{
return;
gp_Pnt aPoint;
gp_Pnt aPoint1, aPoint2;
- bool isFoundPoint = CurveCreator_Utils::getNeighbourPoints( aContext, aView, theX, theY,
- aPoint, aPoint1, aPoint2 );
+ Handle(AIS_InteractiveObject) anAISObject = myCurve->getAISObject();
+ bool isFoundPoint = CurveCreator_Utils::pointOnObject( aView, anAISObject, theX, theY,
+ aPoint, aPoint1, aPoint2 );
if ( !isFoundPoint )
return;
CurveCreator_ICurve::SectionToPointList::const_iterator anIt = aPoints1.begin(),
aLast = aPoints1.end();
int aSectionId = -1;
+ // find the indices of the neighbour point
// there can be a case when a new point is added into two sections
int aPoint1Id = -1, aPoint2Id = -1;
for ( ; anIt != aLast && aSectionId < 0; anIt++ ) {
finishCurveModification( aSelPoints );
- setSelectedPonts();
+ setSelectedPoints();
}
void CurveCreator_Widget::moveSelectedPoints( const int theXPosition,
aChangedPos = myCurve->getPoint( aSectionId, aPointId );
if ( aChangedPos.size() < 2 )
continue;
+
+ // Remember drag points coordinates
+ if ( !myDragged ) {
+ myInitialDragPointsCoords.insert( std::make_pair( aSectionId, aPointId ), aChangedPos );
+ }
+
aChangedPos[0] = aChangedPos[0] - aXDelta;
aChangedPos[1] = aChangedPos[1] - anYDelta;
std::make_pair(std::make_pair( aSectionId, aPointId ),
aChangedPos ));
}
- myCurve->setSeveralPoints( aCoordList );
+ myCurve->setSeveralPoints( aCoordList, false );
myDragged = true;
finishCurveModification( myDragPoints );
if ( aContext.IsNull() )
return;
- std::list<float> aSelectedList = CurveCreator_Utils::getSelectedPoints( aContext );
+ CurveCreator_Utils::getSelectedPoints( aContext, myCurve, myLocalPoints );
+ int aNbPoints = myLocalPoints.size();
- std::list<float>::const_iterator anIt = aSelectedList.begin(), aLast = aSelectedList.end();
+ bool isRowLimit = aNbPoints > myLocalPointRowLimit;
+ myLocalPointView->setVisible( getActionMode() == ModificationMode && !isRowLimit );
- bool isBlocked = myLocalPointView->blockSignals(true);
- myLocalPointView->setRowCount( 0 );
- for ( ; anIt != aLast; anIt++ )
- {
- float aX = *anIt;
- anIt++;
- float anY = *anIt;
- anIt++;
- float aZ = *anIt;
- myLocalPointView->addLocalPointToTable( aX, anY );
+ if ( !isRowLimit ) {
+ bool isBlocked = myLocalPointView->blockSignals(true);
+
+ myLocalPointView->setLocalPointsToTable( myLocalPoints );
+
+ myLocalPointView->blockSignals( isBlocked );
}
- myLocalPointView->blockSignals(isBlocked);
}
/**
*/
void CurveCreator_Widget::setLocalPointContext( const bool theOpen, const bool isUpdateTable )
{
- CurveCreator_Utils::setLocalPointContext( getAISContext(), theOpen );
+ CurveCreator_Utils::setLocalPointContext( myCurve, getAISContext(), theOpen );
if ( !theOpen && isUpdateTable )
updateLocalPointView();
}
void CurveCreator_Widget::setDragStarted( const bool theState, const QPoint& thePoint )
{
if ( theState ) {
- getSelectedPonts( myDragPoints );
+ getSelectedPoints( myDragPoints );
+
myDragStarted = myDragPoints.size();
myDragStartPosition = thePoint;
if ( myDragStarted ) {
// change a viewer interaction style in order to avoid a select rectangle build
myDragInteractionStyle = changeInteractionStyle( SUIT_ViewModel::KEY_FREE );
+ myCurve->setSkipSorting( true );
}
}
else {
changeInteractionStyle( myDragInteractionStyle );
myDragStarted = false;
myDragPoints.clear();
+ myInitialDragPointsCoords.clear();
}
myDragged = false;
}
-void CurveCreator_Widget::getSelectedPonts( CurveCreator_ICurve::SectionToPointList& thePoints )
+void CurveCreator_Widget::getSelectedPoints( CurveCreator_ICurve::SectionToPointList& thePoints )
{
thePoints.clear();
- for ( int i = 0, aNb = myLocalPointView->rowCount(); i < aNb; i++ )
- thePoints.push_back( std::make_pair( myLocalPointView->getSectionId( i ),
- myLocalPointView->getPointId( i ) ) );
-}
-
-
-bool CurveCreator_Widget::isIntersectVertexToPoint( const TopoDS_Vertex& theVertex,
- const CurveCreator_ICurve::SectionToPoint& theSToPoint )
-{
- bool isIntersect = false;
- if ( theVertex.IsNull() )
- return isIntersect;
-
- gp_Pnt aSPoint;
- CurveCreator_UtilsICurve::getPoint( myCurve, theSToPoint.first, theSToPoint.second,
- aSPoint );
- gp_Pnt aVertexPoint = BRep_Tool::Pnt( theVertex );
- isIntersect = fabs( aVertexPoint.X() - aSPoint.X() ) < LOCAL_SELECTION_TOLERANCE &&
- fabs( aVertexPoint.Y() - aSPoint.Y() ) < LOCAL_SELECTION_TOLERANCE;
-
- return isIntersect;
+ thePoints = myLocalPoints;
}
-
-void CurveCreator_Widget::setSelectedPonts( const CurveCreator_ICurve::SectionToPointList& thePoints )
+void CurveCreator_Widget::setSelectedPoints( const CurveCreator_ICurve::SectionToPointList& thePoints )
{
if ( myDragStarted )
return;
- Handle(AIS_InteractiveContext) ic = getAISContext();
- if ( ic.IsNull() || !ic->HasOpenedContext() )
+ Handle(AIS_InteractiveContext) aContext = getAISContext();
+ if ( aContext.IsNull() || !aContext->HasOpenedContext() )
return;
- AIS_ListOfInteractive aListToSelect;
+ CurveCreator_Utils::setSelectedPoints( aContext, myCurve, thePoints );
- AIS_ListOfInteractive aDisplayedList;
- ic->DisplayedObjects( aDisplayedList );
- ic->ClearSelected( Standard_False );
-
- CurveCreator_ICurve::SectionToPointList::const_iterator anIt = thePoints.begin(),
- aLast = thePoints.end();
- CurveCreator_ICurve::SectionToPoint aSToPoint;
- bool isSelectedVertex = false;
- for( ; anIt != aLast; anIt++ ) {
- aSToPoint = *anIt;
- for ( AIS_ListIteratorOfListOfInteractive it( aDisplayedList ); it.More(); it.Next() )
- {
- Handle(AIS_InteractiveObject) anAIS = it.Value();
- if ( anAIS.IsNull() )
- continue;
- Handle(AIS_Point) anAISPoint = Handle(AIS_Point)::DownCast( anAIS );
- if ( !anAISPoint.IsNull() ) {
- TopoDS_Vertex aVertex = TopoDS::Vertex( anAISPoint->Vertex() );
- if ( isIntersectVertexToPoint( aVertex, aSToPoint ) )
- aListToSelect.Append( anAIS );
- }
- else {
- Handle(AIS_Shape) anAISShape = Handle(AIS_Shape)::DownCast( anAIS );
- if ( anAISShape.IsNull() )
- continue;
- const TopoDS_Shape& aShape = anAISShape->Shape();
- TopExp_Explorer aExpV( aShape, TopAbs_VERTEX);
- for ( ; aExpV.More(); aExpV.Next() )
- {
- const TopoDS_Vertex& aVertex = TopoDS::Vertex( aExpV.Current() );
- if ( isIntersectVertexToPoint( aVertex, aSToPoint ) ) {
- ic->AddOrRemoveSelected( aVertex, Standard_False );
- isSelectedVertex = true;
- }
- }
- }
- }
- }
- ic->UpdateCurrentViewer();
- if ( !isSelectedVertex )
- setObjectsSelected( aListToSelect );
updateLocalPointView();
}
+void CurveCreator_Widget::stopActionMode()
+{
+ setActionMode( NoneMode );
+}
+
/**
* Get viewer information before perform the curve modification.
* Take a list of selected cuve points an close local context.
{
if ( theFillPoints ) {
thePoints.clear();
- getSelectedPonts( thePoints );
+ getSelectedPoints( thePoints );
}
setLocalPointContext( false );
}
{
if ( getActionMode() == ModificationMode )
setLocalPointContext( true );
- setSelectedPonts( thePoints );
+ setSelectedPoints( thePoints );
updateUndoRedo();
}
