CurveCreator_Widget::CurveCreator_Widget(QWidget* parent,
CurveCreator_ICurve *theCurve,
const int theActionFlags,
+ const QStringList& theCoordTitles,
Qt::WindowFlags fl,
int theLocalPointRowLimit )
: QWidget(parent), myNewSectionEditor(NULL), myCurve(theCurve), mySection(0),
QGroupBox* aSectionGroup = new QGroupBox(tr("Sections"),this);
mySectionView = new CurveCreator_TreeView(myCurve, aSectionGroup);
+ mySectionView->setSelectionMode( QTreeView::ExtendedSelection );
connect( mySectionView, SIGNAL(selectionChanged()), this, SLOT( onSelectionChanged() ) );
connect( mySectionView, SIGNAL(sectionEntered(int)), this, SLOT(onEditSection(int)) );
connect( mySectionView, SIGNAL(customContextMenuRequested(QPoint)), this, SLOT(onContextMenu(QPoint)) );
- myLocalPointView = new CurveCreator_TableView( myCurve, this );
+ myLocalPointView = new CurveCreator_TableView( myCurve, this, theCoordTitles );
connect( myLocalPointView, SIGNAL( cellChanged( int, int ) ),
this, SLOT( onCellChanged( int, int ) ) );
connect(anAct, SIGNAL(triggered()), this, SLOT(onRemove()) );
aTB->addAction(anAct);
- // TODO join
- //aTB->addSeparator();
+ aTB->addSeparator();
- //anAct = createAction( JOIN_ID, tr("JOIN"), aJoinPixmap, tr("JOIN_TLT"),
- // QKeySequence(Qt::ControlModifier|Qt::Key_Plus ) );
- //connect( anAct, SIGNAL(triggered()), this, SLOT(onJoin()) );
- //aTB->addAction(anAct);
+ anAct = createAction( JOIN_ID, tr("JOIN"), aJoinPixmap, tr("JOIN_TLT"),
+ QKeySequence(Qt::ControlModifier|Qt::Key_Plus ) );
+ connect( anAct, SIGNAL(triggered()), this, SLOT(onJoin()) );
+ aTB->addAction(anAct);
anAct = createAction( CLEAR_ALL_ID, tr("CLEAR_ALL"), QPixmap(), tr("CLEAR_ALL_TLT"),
QKeySequence(Qt::ControlModifier | Qt::ShiftModifier | Qt::Key_Delete ) );
connect( anAct, SIGNAL(triggered()), this, SLOT( onClearAll()) );
- // TODO join
- //anAct = createAction( JOIN_ALL_ID, tr("JOIN_ALL"), QPixmap(), tr("JOIN_ALL_TLT"),
- // QKeySequence(Qt::ControlModifier | Qt::ShiftModifier | Qt::Key_Plus ) );
- //connect( anAct, SIGNAL(triggered()), this, SLOT(onJoinAll()) );
+ anAct = createAction( JOIN_ALL_ID, tr("JOIN_ALL"), QPixmap(), tr("JOIN_ALL_TLT"),
+ QKeySequence(Qt::ControlModifier | Qt::ShiftModifier | Qt::Key_Plus ) );
+ connect( anAct, SIGNAL(triggered()), this, SLOT(onJoinAll()) );
QVBoxLayout* aSectLayout = new QVBoxLayout();
aSectLayout->setMargin( 5 );
if ( removeEnabled() )
anEnabledAct << REMOVE_ID;
QList<int> aSelSections = mySectionView->getSelectedSections();
- QList< QPair< int, int > > aSelPoints = mySectionView->getSelectedPoints();
CurveCreator_TreeView::SelectionType aSelType = mySectionView->getSelectionType();
switch( aSelType ){
case CurveCreator_TreeView::ST_NOSEL:{
}
break;
case ModificationMode: {
- anEnabledAct << CLOSE_SECTIONS_ID << UNCLOSE_SECTIONS_ID << SET_SECTIONS_POLYLINE_ID << SET_SECTIONS_SPLINE_ID;
+ if ( myNewSectionEditor->isEnableClosed() )
+ anEnabledAct << CLOSE_SECTIONS_ID << UNCLOSE_SECTIONS_ID;
+ anEnabledAct << SET_SECTIONS_POLYLINE_ID << SET_SECTIONS_SPLINE_ID;
int aSectCnt = myCurve->getNbSections();
if( aSectCnt > 0 )
anEnabledAct << CLEAR_ALL_ID;
- // TODO
- //if( aSectCnt > 1 )
- // anEnabledAct << JOIN_ALL_ID;
- //if( aSelSections.size() > 1 ){
- // anEnabledAct << JOIN_ID;
- //}
+ if( aSectCnt > 1 )
+ anEnabledAct << JOIN_ALL_ID;
+ if( aSelSections.size() > 1 ){
+ anEnabledAct << JOIN_ID;
+ }
}
break;
case DetectionMode: {
}
break;
case NoneMode:
+ {
+ int aSectCnt = myCurve->getNbSections();
+ if( aSectCnt > 1 )
+ anEnabledAct << JOIN_ALL_ID;
+ if( aSelSections.size() > 1 )
+ anEnabledAct << JOIN_ID;
+ }
+ break;
default:
break;
}
if( (myCurve->getNbSections() + myCurve->getNbPoints()) > 0 ){
anEnabledAct << REMOVE_ALL_ID;
}*/
- // TODO
- //if( myCurve->getNbSections() > 1 ){
- // anEnabledAct << JOIN_ALL_ID;
- //}
+ if( myCurve->getNbSections() > 1 ){
+ anEnabledAct << JOIN_ALL_ID;
+ }
}
QList<ActionId> anIds = myActionMap.keys();
for( int i = 0 ; i < anIds.size() ; i++ ){
if( aSelSection.size() > 0 ){
mySection = aSelSection[0];
}
- else{
- QList< QPair<int,int> > aSelPoints = mySectionView->getSelectedPoints();
- if( aSelPoints.size() > 0 ){
- mySection = aSelPoints[0].first;
- myPointNum = aSelPoints[0].second + 1;
- }
- }
// emit subOperationStarted( myNewPointEditor );
}
return anAction;
}
-void CurveCreator_Widget::setActionMode( const ActionMode& theMode )
-{
- ActionMode aPrevMode = getActionMode();
- QAction* aPrevAction = getAction( aPrevMode );
- switch ( theMode ) {
- case NoneMode: {
- if ( aPrevAction ) {
- if ( aPrevAction->isChecked() )
- aPrevAction->setChecked( false );
- }
- if ( aPrevMode == ModificationMode )
- onModificationMode( false );
- if ( aPrevMode == AdditionMode )
- onAdditionMode( false );
- }
- break;
- case AdditionMode: {
- // TODO
- }
- break;
- case ModificationMode:
- {
- //TODO
- }
- break;
- case DetectionMode:
- break;
- }
-}
-
-CurveCreator_Widget::ActionMode CurveCreator_Widget::getActionMode() const
-{
- ActionMode aMode = NoneMode;
-
- if ( myActionMap[ADDITION_MODE_ID]->isChecked() )
- aMode = AdditionMode;
- else if ( myActionMap[MODIFICATION_MODE_ID]->isChecked() )
- aMode = ModificationMode;
- else if ( myActionMap[DETECTION_MODE_ID]->isChecked() )
- aMode = DetectionMode;
-
- return aMode;
-}
-
void CurveCreator_Widget::onEditSection( int theSection )
{
if( !myCurve )
}
stopActionMode();
- int aMainSect = aSections[0];
- int aMainSectSize = myCurve->getNbPoints(aMainSect);
- for( int i = 1 ; i < aSections.size() ; i++ ){
- int aSectNum = aSections[i] - (i-1);
- myCurve->join( aMainSect, aSectNum );
- mySectionView->sectionsRemoved( aSectNum );
+ std::list<int> aSectionsToJoin;
+ for( int i = 0; i < aSections.size() ; i++ ){
+ aSectionsToJoin.push_back( aSections[i] );
}
+ //int aMainSect = aSectionsToJoin.front();
+ //int aMainSectSize = myCurve->getNbPoints(aMainSect);
+ if ( myCurve->join( aSectionsToJoin ) )
+ {
+ std::list<int>::const_iterator anIt = aSectionsToJoin.begin(),
+ aLast = aSectionsToJoin.end();
+ // the first section should be skipped. It is not removed, but is modified
+ anIt++;
+ for ( ; anIt != aLast; anIt++ )
+ mySectionView->sectionsRemoved( *anIt );
+ }
+
+ /* The update for the points of the main section
int aNewSectSize = myCurve->getNbPoints(aMainSect);
if( aNewSectSize != aMainSectSize )
- mySectionView->pointsAdded( aMainSect, aMainSectSize, aNewSectSize-aMainSectSize );
+ mySectionView->pointsAdded( aMainSect, aMainSectSize, aNewSectSize-aMainSectSize );*/
updateUndoRedo();
}
if( !myCurve )
return;
stopActionMode();
- myCurve->join();
+
+ std::list<int> aSectionsToJoin;
+ for( int i = 0, aNb = myCurve->getNbSections(); i < aNb ; i++ ){
+ aSectionsToJoin.push_back( i );
+ }
+ bool aRes = myCurve->join( aSectionsToJoin );
+
mySectionView->reset();
updateActionsStates();
updateUndoRedo();
void CurveCreator_Widget::onContextMenu( QPoint thePoint )
{
QList<ActionId> aContextActions;
- aContextActions << CLEAR_ALL_ID << JOIN_ALL_ID << SEPARATOR_ID <<
+ aContextActions << CLEAR_ALL_ID << JOIN_ID << JOIN_ALL_ID << SEPARATOR_ID <<
CLOSE_SECTIONS_ID << UNCLOSE_SECTIONS_ID << SET_SECTIONS_POLYLINE_ID <<
SET_SECTIONS_SPLINE_ID;
QPoint aGlPoint = mySectionView->mapToGlobal(thePoint);
return mySectionView->getSelectedSections();
}
-QList< QPair< int, int > > CurveCreator_Widget::getSelectedPoints()
+void CurveCreator_Widget::setSelectedSections( const QList<int>& theSections )
{
- return mySectionView->getSelectedPoints();
+ mySectionView->setSelectedSections( theSections );
+ updateActionsStates();
+ updateUndoRedo();
}
/**
return isEnabled;
}
+void CurveCreator_Widget::setActionMode( const ActionMode& theMode )
+{
+ ActionMode aPrevMode = getActionMode();
+ QAction* aPrevAction = getAction( aPrevMode );
+ QAction* anAction = getAction( theMode );
+ switch ( theMode ) {
+ case NoneMode:
+ case AdditionMode: {
+ if ( aPrevAction ) {
+ if ( aPrevAction->isChecked() ) {
+ aPrevAction->setChecked( false );
+ }
+ }
+ if ( aPrevMode == ModificationMode )
+ onModificationMode( false );
+ if ( aPrevMode == AdditionMode )
+ onAdditionMode( false );
+
+ if ( theMode == AdditionMode )
+ {
+ anAction->setChecked( true );
+ onModeChanged( true );
+ }
+ }
+ break;
+ break;
+ case ModificationMode:
+ {
+ //TODO
+ }
+ break;
+ case DetectionMode:
+ break;
+ }
+}
+
+CurveCreator_Widget::ActionMode CurveCreator_Widget::getActionMode() const
+{
+ ActionMode aMode = NoneMode;
+
+ if ( myActionMap[ADDITION_MODE_ID]->isChecked() )
+ aMode = AdditionMode;
+ else if ( myActionMap[MODIFICATION_MODE_ID]->isChecked() )
+ aMode = ModificationMode;
+ else if ( myActionMap[DETECTION_MODE_ID]->isChecked() )
+ aMode = DetectionMode;
+
+ return aMode;
+}
//=================================================================================
// function : GeometryGUI::addCoordsByClick()
if ( theEvent->button() != Qt::LeftButton )
return;
+ myPressedX = theEvent->x();
+ myPressedY = theEvent->y();
+
switch( getActionMode() ) {
case ModificationMode: {
//store initial cursor position for Drag&Drop
if ( myDragStarted ) {
bool isDragged = myDragged;
CurveCreator_ICurve::SectionToPointList aDraggedPoints;
- CurveCreator_ICurve::SectionToPointCoordsList anInitialDragPointsCoords;
+ QMap<CurveCreator_ICurve::SectionToPoint, std::deque< float > > anInitialDragPointsCoords;
if ( myDragged ) {
aDraggedPoints = myDragPoints;
anInitialDragPointsCoords = myInitialDragPointsCoords;
setDragStarted( false );
if ( aDraggedPoints.size() > 0 ) {
+ // Collect old coordinates of the dragged points
+ CurveCreator_ICurve::SectionToPointCoordsList anOldPoints;
+ foreach ( const CurveCreator_ICurve::SectionToPoint aSectionToPoint, anInitialDragPointsCoords.keys() ) {
+ CurveCreator::Coordinates aCoords = anInitialDragPointsCoords.value( aSectionToPoint );
+ anOldPoints.push_back( std::make_pair( aSectionToPoint, aCoords ) );
+ }
+
if ( myCurve->canPointsBeSorted() ) {
+ // Add old coordinates of the curve points (except the dragged points) to the list
+ for( int aSectionId = 0 ; aSectionId < myCurve->getNbSections() ; aSectionId++ ) {
+ CurveCreator::Coordinates aCoords;
+ for ( int aPointId = 0, aNb = myCurve->getNbPoints( aSectionId ); aPointId < aNb; aPointId++ ) {
+ aCoords = myCurve->getPoint( aSectionId, aPointId );
+ if ( aCoords.size() < 2 ) {
+ continue;
+ }
+
+ CurveCreator_ICurve::SectionToPoint aSectionToPoint = std::make_pair( aSectionId, aPointId );
+
+ if ( !anInitialDragPointsCoords.contains( aSectionToPoint ) ) {
+ anOldPoints.push_back( std::make_pair( aSectionToPoint, aCoords ) );
+ }
+ }
+ }
+
// Apply points sorting
CurveCreator_ICurve::SectionToPointList aPoints;
startCurveModification( aPoints, false );
finishCurveModification( aDraggedPoints );
} else {
// if the drag of some points has happened, restore the drag selection
- if ( aDraggedPoints.size() > 0 ) {
- START_MEASURE_TIME;
- setSelectedPoints( aDraggedPoints );
- END_MEASURE_TIME( "drop" );
- }
+ START_MEASURE_TIME;
+ setSelectedPoints( aDraggedPoints );
+ END_MEASURE_TIME( "drop" );
}
// Save drag difference
- myCurve->saveCoordDiff( anInitialDragPointsCoords );
+ myCurve->saveCoordDiff( anOldPoints );
}
}
else // check whether the segment is clicked an a new point should be added to the segment
- insertPointToSelectedSegment( theEvent->pos().x(), theEvent->pos().y() );
+ {
+ int aReleasedX = theEvent->x();
+ int aReleasedY = theEvent->y();
+ if ( myPressedX == aReleasedX && myPressedY == aReleasedY )
+ insertPointToSelectedSegment( aReleasedX, aReleasedY );
+ }
// updates the input panel table to show the selected point coordinates
updateLocalPointView();
+ updateUndoRedo();
}
/**
{
stopActionMode();
- QList< QPair<int,int> > aSelPoints = mySectionView->getSelectedPoints();
- int aCurrSect=-1;
- int aRemoveCnt = 0;
- for( int i = 0 ; i < aSelPoints.size() ; i++ ){
- if( aCurrSect != aSelPoints[i].first ){
- aRemoveCnt = 0;
- aCurrSect = aSelPoints[i].first;
- }
- int aPntIndx = aSelPoints[i].second - aRemoveCnt;
- myCurve->removePoint( aCurrSect, aPntIndx );
- mySectionView->pointsRemoved( aCurrSect, aPntIndx );
- aRemoveCnt++;
- }
QList<int> aSections = mySectionView->getSelectedSections();
for( int i = 0 ; i < aSections.size() ; i++ ){
int aSectNum = aSections[i] - (i);
CurveCreator_ICurve::SectionToPointList::const_iterator anIt = aPoints1.begin(),
aLast = aPoints1.end();
int aSectionId = -1;
+ // find the indices of the neighbour point
// there can be a case when a new point is added into two sections
int aPoint1Id = -1, aPoint2Id = -1;
for ( ; anIt != aLast && aSectionId < 0; anIt++ ) {
// Remember drag points coordinates
if ( !myDragged ) {
- myInitialDragPointsCoords.push_back(
- std::make_pair(std::make_pair( aSectionId, aPointId ),
- aChangedPos ));
+ myInitialDragPointsCoords.insert( std::make_pair( aSectionId, aPointId ), aChangedPos );
}
aChangedPos[0] = aChangedPos[0] - aXDelta;
if ( !isRowLimit ) {
bool isBlocked = myLocalPointView->blockSignals(true);
- myLocalPointView->setRowCount( 0 );
- CurveCreator_ICurve::SectionToPointList::const_iterator anIt = myLocalPoints.begin(),
- aLast = myLocalPoints.end();
- for ( ; anIt != aLast; anIt++ )
- myLocalPointView->addLocalPointToTable( *anIt );
+
+ myLocalPointView->setLocalPointsToTable( myLocalPoints );
myLocalPointView->blockSignals( isBlocked );
}
