#include "CurveCreator_Widget.h"
#include "CurveCreator_TreeView.h"
#include "CurveCreator_ICurve.hxx"
-//#include "CurveCreator_CurveEditor.hxx"
#include "CurveCreator.hxx"
-//#include "CurveCreator_NewPointDlg.h"
#include "CurveCreator_NewSectionDlg.h"
#include "CurveCreator_Utils.h"
+#include "CurveCreator_UtilsICurve.hxx"
#include "CurveCreator_TableView.h"
#include <SUIT_Session.h>
#include <OCCViewer_ViewManager.h>
#include <OCCViewer_ViewPort3d.h>
#include "OCCViewer_Utilities.h"
-#include "OCCViewer_ViewWidget.h"
-
-#include <BRep_Tool.hxx>
-#include <TopoDS.hxx>
-#include <TopoDS_Vertex.hxx>
-#include <TopoDS_Wire.hxx>
-#include <TopoDS_Edge.hxx>
-#include <gp_Lin.hxx>
-#include <gp_Dir.hxx>
-#include <TopExp_Explorer.hxx>
-
-#include <GeomAPI_ProjectPointOnCurve.hxx>
-
-#include <AIS_ListOfInteractive.hxx>
-#include <AIS_ListIteratorOfListOfInteractive.hxx>
-#include <AIS_Shape.hxx>
-#include <AIS_Point.hxx>
-#include <AIS_Line.hxx>
-#include <Geom_Point.hxx>
-#include <Geom_BSplineCurve.hxx>
-#include <Geom_Line.hxx>
-#include <StdSelect_BRepOwner.hxx>
#include <QHBoxLayout>
#include <QVBoxLayout>
#include <QMouseEvent>
#include <QApplication>
#include <QTableWidget>
+#include <QTime>
+
+//#define MEASURE_TIME
+
+#ifdef MEASURE_TIME
+
+ #define START_MEASURE_TIME \
+ QTime aTimer; \
+ aTimer.start(); \
+
+ #define END_MEASURE_TIME( theMsg ) \
+ double aTime = aTimer.elapsed() * 0.001; \
+ FILE* aFile = fopen( "performance", "a" ); \
+ fprintf( aFile, "%s = %.3lf sec\n", theMsg, aTime ); \
+ fclose( aFile ); \
+
+#else
+
+ #define START_MEASURE_TIME
+ #define END_MEASURE_TIME( theMsg )
+
+#endif
+
+
+
-const double LOCAL_SELECTION_TOLERANCE = 0.0001;
-const int SECTION_NAME_COLUMN_WIDTH = 75;
-const int POINT_INDEX_COLUMN_WIDTH = 40;
-const int SCENE_PIXEL_TOLERANCE = 10;
CurveCreator_Widget::CurveCreator_Widget(QWidget* parent,
CurveCreator_ICurve *theCurve,
- Qt::WindowFlags fl)
+ const int theActionFlags,
+ Qt::WindowFlags fl,
+ int theLocalPointRowLimit )
: QWidget(parent), myNewSectionEditor(NULL), myCurve(theCurve), mySection(0),
myDragStarted( false ), myDragInteractionStyle( SUIT_ViewModel::STANDARD ),
- myOCCViewer( 0 ), myOCCViewWidget( 0 )
+ myOCCViewer( 0 ), myLocalPointRowLimit( theLocalPointRowLimit )
{
- myNewSectionEditor = new CurveCreator_NewSectionDlg( this );
+ bool isToEnableClosed = !( theActionFlags & DisableClosedSection );
+ myNewSectionEditor = new CurveCreator_NewSectionDlg( this, isToEnableClosed );
myNewSectionEditor->hide();
connect( myNewSectionEditor, SIGNAL(addSection()), this, SLOT(onAddNewSection()) );
connect( myNewSectionEditor, SIGNAL(modifySection()), this, SLOT(onModifySection()) );
QGroupBox* aSectionGroup = new QGroupBox(tr("Sections"),this);
mySectionView = new CurveCreator_TreeView(myCurve, aSectionGroup);
+ mySectionView->setSelectionMode( QTreeView::ExtendedSelection );
connect( mySectionView, SIGNAL(selectionChanged()), this, SLOT( onSelectionChanged() ) );
connect( mySectionView, SIGNAL(sectionEntered(int)), this, SLOT(onEditSection(int)) );
connect( mySectionView, SIGNAL(customContextMenuRequested(QPoint)), this, SLOT(onContextMenu(QPoint)) );
- myLocalPointView = new QTableWidget();
- myLocalPointView->setItemDelegate( new CurveCreator_TableItemDelegate( myLocalPointView ) );
- myLocalPointView->setVisible( false );
- myLocalPointView->setColumnCount( 4 );
- myLocalPointView->setColumnWidth( 0, SECTION_NAME_COLUMN_WIDTH );
- myLocalPointView->setColumnWidth( 1, POINT_INDEX_COLUMN_WIDTH );
- QStringList aLabels;
- //aLabels << tr( "SECTION_LABEL" ) << tr( "IDENTIFIER_LABEL" ) << tr( "X_POSITION_LBL" ) << tr( "Y_POSITION_LBL" );
- aLabels << tr( "Section" ) << "Index" << tr( "X" ) << tr( "Y" );
- myLocalPointView->setHorizontalHeaderLabels( aLabels );
+ myLocalPointView = new CurveCreator_TableView( myCurve, this );
connect( myLocalPointView, SIGNAL( cellChanged( int, int ) ),
this, SLOT( onCellChanged( int, int ) ) );
aTB->addAction(anAct);
aTB->addSeparator();
-
+
anAct = createAction( NEW_SECTION_ID, tr("NEW_SECTION"), aNewSectionPixmap, tr("NEW_SECTION_TLT"),
QKeySequence(Qt::ControlModifier|Qt::Key_N) );
connect(anAct, SIGNAL(triggered()), this, SLOT(onNewSection()) );
- aTB->addAction(anAct);
- aTB->addSeparator();
+ if ( !(theActionFlags & DisableNewSection) ) {
+ aTB->addAction(anAct);
+ aTB->addSeparator();
+ }
anAct = createAction( ADDITION_MODE_ID, tr("ADDITION_MODE"), aNewPointPixmap, tr("ADDITION_MODE_TLT"),
QKeySequence() );
anAct->setCheckable(true);
connect(anAct, SIGNAL(triggered(bool)), this, SLOT(onDetectionMode(bool)) );
connect(anAct, SIGNAL(toggled(bool)), this, SLOT(onModeChanged(bool)) );
- aTB->addAction(anAct);
-
+ if ( !(theActionFlags & DisableDetectionMode) ) {
+ aTB->addAction(anAct);
+ }
+
anAct = createAction( CLOSE_SECTIONS_ID, tr("CLOSE_SECTIONS"), QPixmap(), tr("CLOSE_SECTIONS_TLT"),
QKeySequence(Qt::ControlModifier|Qt::Key_W) );
connect(anAct, SIGNAL(triggered()), this, SLOT(onCloseSections()) );
QKeySequence(Qt::ControlModifier|Qt::Key_Delete ) );
connect(anAct, SIGNAL(triggered()), this, SLOT(onRemove()) );
aTB->addAction(anAct);
- // TODO join
- //aTB->addSeparator();
+
+ aTB->addSeparator();
- //anAct = createAction( JOIN_ID, tr("JOIN"), aJoinPixmap, tr("JOIN_TLT"),
- // QKeySequence(Qt::ControlModifier|Qt::Key_Plus ) );
- //connect( anAct, SIGNAL(triggered()), this, SLOT(onJoin()) );
- //aTB->addAction(anAct);
+ anAct = createAction( JOIN_ID, tr("JOIN"), aJoinPixmap, tr("JOIN_TLT"),
+ QKeySequence(Qt::ControlModifier|Qt::Key_Plus ) );
+ connect( anAct, SIGNAL(triggered()), this, SLOT(onJoin()) );
+ aTB->addAction(anAct);
anAct = createAction( CLEAR_ALL_ID, tr("CLEAR_ALL"), QPixmap(), tr("CLEAR_ALL_TLT"),
QKeySequence(Qt::ControlModifier | Qt::ShiftModifier | Qt::Key_Delete ) );
connect( anAct, SIGNAL(triggered()), this, SLOT( onClearAll()) );
- // TODO join
- //anAct = createAction( JOIN_ALL_ID, tr("JOIN_ALL"), QPixmap(), tr("JOIN_ALL_TLT"),
- // QKeySequence(Qt::ControlModifier | Qt::ShiftModifier | Qt::Key_Plus ) );
- //connect( anAct, SIGNAL(triggered()), this, SLOT(onJoinAll()) );
+ anAct = createAction( JOIN_ALL_ID, tr("JOIN_ALL"), QPixmap(), tr("JOIN_ALL_TLT"),
+ QKeySequence(Qt::ControlModifier | Qt::ShiftModifier | Qt::Key_Plus ) );
+ connect( anAct, SIGNAL(triggered()), this, SLOT(onJoinAll()) );
QVBoxLayout* aSectLayout = new QVBoxLayout();
aSectLayout->setMargin( 5 );
// aLay->addLayout(aNameLayout);
aLay->addWidget(aSectionGroup);
setLayout(aLay);
- onSelectionChanged();
+
+ updateActionsStates();
+ updateUndoRedo();
}
/**
return myOCCViewer;
}
-/**
- * Set an OCC viewer
- */
-void CurveCreator_Widget::setOCCViewWidget( OCCViewer_ViewWidget* theViewWidget )
-{
- if ( myOCCViewWidget == theViewWidget )
- return;
-
- if ( myOCCViewWidget ) {
- disconnect( myOCCViewWidget, SIGNAL( mousePressed( QMouseEvent* ) ),
- this, SLOT( onMousePress( QMouseEvent* ) ) );
- disconnect( myOCCViewWidget, SIGNAL( mouseReleased( QMouseEvent* ) ),
- this, SLOT( onMouseRelease( QMouseEvent* ) ) );
- disconnect( myOCCViewWidget, SIGNAL( mouseMoving( QMouseEvent* ) ),
- this, SLOT( onMouseMove( QMouseEvent* ) ) );
- //disconnect( myOCCViewWidget, SIGNAL( lastViewClosed( SUIT_ViewManager* ) ),
- // this, SLOT( onLastViewClosed( SUIT_ViewManager* ) ) );
-
- // restore normal mode in the viewer
- OCCViewer_Utilities::setViewWidget2DMode( myOCCViewWidget, OCCViewer_ViewWidget::No2dMode );
- // all local contexts should be closed if the viewer is not more used
- setLocalPointContext( false, true );
- }
-
- myOCCViewWidget = theViewWidget;
- if ( myOCCViewWidget ) {
- connect( myOCCViewWidget, SIGNAL( mousePressed( QMouseEvent* ) ),
- this, SLOT( onMousePress( QMouseEvent* ) ) );
- connect( myOCCViewWidget, SIGNAL( mouseReleased( QMouseEvent* ) ),
- this, SLOT( onMouseRelease( QMouseEvent* ) ) );
- connect( myOCCViewWidget, SIGNAL( mouseMoving( QMouseEvent* ) ),
- this, SLOT( onMouseMove( QMouseEvent* ) ) );
- //connect( aViewManager, SIGNAL( lastViewClosed( SUIT_ViewManager* ) ),
- // this, SLOT( onLastViewClosed( SUIT_ViewManager* ) ) );
- OCCViewer_Utilities::setViewWidget2DMode( myOCCViewWidget, OCCViewer_ViewWidget::XYPlane );
- }
-}
-
-/**
- * Returns current OCC viewer
- */
-OCCViewer_ViewWidget* CurveCreator_Widget::getOCCViewWidget()
-{
- return myOCCViewWidget;
-}
-
/**
* Returns OCC viewer context
*/
OCCViewer_Viewer* aViewer = getOCCViewer();
if ( aViewer )
aContext = aViewer->getAISContext();
- else if ( myOCCViewWidget )
- aContext = myOCCViewWidget->getAISContext();
return aContext;
}
OCCViewer_Viewer* aViewer = getOCCViewer();
if ( aViewer )
aViewPort = ((OCCViewer_ViewWindow*)aViewer->getViewManager()->getActiveView())->getViewPort();
- else if ( myOCCViewWidget )
- aViewPort = myOCCViewWidget->getViewPort();
return aViewPort;
}
return aPrevStyle;
}
-/**
- * Set interaction style in the OCC viewer
- * \param theStyle a new style
- * \return the previous style
- */
-void CurveCreator_Widget::setObjectsSelected(const AIS_ListOfInteractive& theList)
-{
- OCCViewer_Viewer* aViewer = getOCCViewer();
- if ( aViewer )
- aViewer->setObjectsSelected(theList);
- else if ( myOCCViewWidget ) {
- Handle(AIS_InteractiveContext) aContext = myOCCViewWidget->getAISContext();
-
- AIS_ListIteratorOfListOfInteractive aIt;
- for (aIt.Initialize(theList); aIt.More(); aIt.Next())
- aContext->AddOrRemoveSelected(aIt.Value(), false);
- aContext->UpdateCurrentViewer();
- }
-}
-
//=======================================================================
// function: reset
// purpose: reset the widget viewer, close local context, clear selection
{
}
-//=======================================================================
-// function: getUniqSectionName
-// purpose: return unique section name
-//=======================================================================
-std::string CurveCreator_Widget::getUniqSectionName( CurveCreator_ICurve* theCurve ) const
-{
- for( int i = 0 ; i < 1000000 ; i++ ){
- char aBuffer[255];
- sprintf( aBuffer, "Section_%d", i+1 );
- std::string aName(aBuffer);
- int j;
- for( j = 0 ; j < theCurve->getNbSections() ; j++ ){
- if( theCurve->getSectionName(j) == aName )
- break;
- }
- if( j == theCurve->getNbSections() )
- return aName;
- }
- return "";
-}
-
void CurveCreator_Widget::setCurve( CurveCreator_ICurve* theCurve )
{
myCurve = theCurve;
- mySectionView->setCurve(myCurve);
- onSelectionChanged();
+ mySectionView->setCurve( myCurve );
+ myLocalPointView->setCurve( myCurve );
+ updateActionsStates();
updateUndoRedo();
}
void CurveCreator_Widget::onSelectionChanged()
+{
+ updateActionsStates();
+ updateUndoRedo();
+ emit selectionChanged();
+}
+
+void CurveCreator_Widget::updateActionsStates()
{
QList<ActionId> anEnabledAct;
if( myCurve ){
if ( removeEnabled() )
anEnabledAct << REMOVE_ID;
QList<int> aSelSections = mySectionView->getSelectedSections();
- QList< QPair< int, int > > aSelPoints = mySectionView->getSelectedPoints();
CurveCreator_TreeView::SelectionType aSelType = mySectionView->getSelectionType();
switch( aSelType ){
case CurveCreator_TreeView::ST_NOSEL:{
int aSectCnt = myCurve->getNbSections();
if( aSectCnt > 0 )
anEnabledAct << CLEAR_ALL_ID;
- // TODO
- //if( aSectCnt > 1 )
- // anEnabledAct << JOIN_ALL_ID;
- //if( aSelSections.size() > 1 ){
- // anEnabledAct << JOIN_ID;
- //}
+ if( aSectCnt > 1 )
+ anEnabledAct << JOIN_ALL_ID;
+ if( aSelSections.size() > 1 ){
+ anEnabledAct << JOIN_ID;
+ }
}
break;
case DetectionMode: {
}
break;
case NoneMode:
+ {
+ int aSectCnt = myCurve->getNbSections();
+ if( aSectCnt > 1 )
+ anEnabledAct << JOIN_ALL_ID;
+ if( aSelSections.size() > 1 )
+ anEnabledAct << JOIN_ID;
+ }
+ break;
default:
break;
}
if( (myCurve->getNbSections() + myCurve->getNbPoints()) > 0 ){
anEnabledAct << REMOVE_ALL_ID;
}*/
- // TODO
- //if( myCurve->getNbSections() > 1 ){
- // anEnabledAct << JOIN_ALL_ID;
- //}
+ if( myCurve->getNbSections() > 1 ){
+ anEnabledAct << JOIN_ALL_ID;
+ }
}
QList<ActionId> anIds = myActionMap.keys();
for( int i = 0 ; i < anIds.size() ; i++ ){
}
}
}
- updateUndoRedo();
- emit selectionChanged();
}
void CurveCreator_Widget::onAdditionMode(bool checked)
return;
Handle(AIS_InteractiveContext) aContext = getAISContext();
- if( !myCurve || !aContext )
+ if( !myCurve || aContext.IsNull() )
return;
mySection= -1;
if( aSelSection.size() > 0 ){
mySection = aSelSection[0];
}
- else{
- QList< QPair<int,int> > aSelPoints = mySectionView->getSelectedPoints();
- if( aSelPoints.size() > 0 ){
- mySection = aSelPoints[0].first;
- myPointNum = aSelPoints[0].second + 1;
- }
- }
// emit subOperationStarted( myNewPointEditor );
}
break;
}
}
- onSelectionChanged();
- setLocalPointContext( aMode == ModificationMode, true );
-}
-
-void CurveCreator_Widget::onAddNewPoint(const CurveCreator::Coordinates& theCoords)
-{
- if( !myCurve )
- return;
- //myCurve->addPoints(theCoords, mySection, myPointNum );
- //mySectionView->pointsAdded( mySection, myPointNum );
- //myPointNum++;
- QList<int> aSections = mySectionView->getSelectedSections();
- if( aSections.size() == 0 ){
- return;
- }
- int aSection = aSections[0];
- myCurve->addPoints(theCoords, aSection); // add to the end of section
- mySectionView->pointsAdded( aSection, myCurve->getNbPoints( aSection ) );
- onSelectionChanged();
+ updateActionsStates();
updateUndoRedo();
+ setLocalPointContext( aMode == ModificationMode, true );
}
void CurveCreator_Widget::onNewSection()
{
if( !myCurve )
return;
+
+ stopActionMode();
myNewSectionEditor->clear();
myNewSectionEditor->setEditMode(false);
- QString aSectName = QString( getUniqSectionName(myCurve).c_str() );
+ QString aSectName = QString( CurveCreator_UtilsICurve::getUniqSectionName( myCurve ).c_str() );
myNewSectionEditor->setSectionParameters(aSectName, true, CurveCreator::Polyline );
- emit subOperationStarted( myNewSectionEditor );
+ emit subOperationStarted( myNewSectionEditor, false );
}
void CurveCreator_Widget::onAddNewSection()
{
if( !myCurve )
return;
- myCurve->addSection( myNewSectionEditor->getName().toStdString(), myNewSectionEditor->getSectionType(),
- myNewSectionEditor->isClosed() );
+ myCurve->addSection( myNewSectionEditor->getName().toStdString(),
+ myNewSectionEditor->getSectionType(),
+ myNewSectionEditor->isClosed() );
mySectionView->sectionAdded( -1 ); // add a new section to the end of list
- QString aNewName = QString(getUniqSectionName(myCurve).c_str());
+ QString aNewName = QString( CurveCreator_UtilsICurve::getUniqSectionName( myCurve ).c_str() );
myNewSectionEditor->setSectionName(aNewName);
- onSelectionChanged();
+ updateActionsStates();
updateUndoRedo();
onCancelSection();
}
return anAct;
}
-QAction* CurveCreator_Widget::getAction(ActionId theId)
+QAction* CurveCreator_Widget::getAction( ActionId theId )
{
if( myActionMap.contains(theId) )
return myActionMap[theId];
return NULL;
}
+QAction* CurveCreator_Widget::getAction( ActionMode theMode )
+{
+ ActionId anActionId = NONE_ID;
+ switch ( theMode ) {
+ case AdditionMode:
+ anActionId = ADDITION_MODE_ID;
+ break;
+ case ModificationMode:
+ anActionId = MODIFICATION_MODE_ID;
+ break;
+ case DetectionMode:
+ anActionId = DETECTION_MODE_ID;
+ break;
+ default:
+ break;
+ }
+ QAction* anAction = 0;
+ if ( anActionId != NONE_ID && myActionMap.contains( anActionId ) )
+ anAction = myActionMap[anActionId];
+ return anAction;
+}
+
+void CurveCreator_Widget::setActionMode( const ActionMode& theMode )
+{
+ ActionMode aPrevMode = getActionMode();
+ QAction* aPrevAction = getAction( aPrevMode );
+ switch ( theMode ) {
+ case NoneMode: {
+ if ( aPrevAction ) {
+ if ( aPrevAction->isChecked() )
+ aPrevAction->setChecked( false );
+ }
+ if ( aPrevMode == ModificationMode )
+ onModificationMode( false );
+ if ( aPrevMode == AdditionMode )
+ onAdditionMode( false );
+ }
+ break;
+ case AdditionMode: {
+ // TODO
+ }
+ break;
+ case ModificationMode:
+ {
+ //TODO
+ }
+ break;
+ case DetectionMode:
+ break;
+ }
+}
+
CurveCreator_Widget::ActionMode CurveCreator_Widget::getActionMode() const
{
ActionMode aMode = NoneMode;
{
if( !myCurve )
return;
+
+ stopActionMode();
mySection = theSection;
QString aSectName = QString::fromStdString( myCurve->getSectionName(theSection));
bool isClosed = myCurve->isClosed(theSection);
myNewSectionEditor->setEditMode(true);
myNewSectionEditor->setSectionParameters( aSectName, isClosed, aType );
- emit subOperationStarted( myNewSectionEditor );
+ emit subOperationStarted( myNewSectionEditor, true );
}
void CurveCreator_Widget::onModifySection()
QString aName = myNewSectionEditor->getName();
bool isClosed = myNewSectionEditor->isClosed();
CurveCreator::SectionType aSectType = myNewSectionEditor->getSectionType();
-// myCurve->startOperation();
if( myCurve->getSectionName(mySection) != aName.toStdString() )
myCurve->setSectionName( mySection , aName.toStdString() );
if( myCurve->isClosed(mySection) != isClosed )
myCurve->setClosed( mySection, isClosed );
-// myCurve->finishOperation();
mySectionView->sectionChanged(mySection);
updateUndoRedo();
onCancelSection();
}
-/*void CurveCreator_Widget::onEditPoint( int theSection, int thePoint )
-{
- if( !myNewPointEditor || !myEdit )
- return;
- mySection = theSection;
- myPointNum = thePoint;
- QString aSectName = QString::fromStdString( myCurve->getSectionName(theSection));
- myNewPointEditor->setEditMode(true);
- myNewPointEditor->setSectionName(aSectName);
- myNewPointEditor->setDimension( myCurve->getDimension() );
- CurveCreator::Coordinates aCoords = myCurve->getCoordinates(theSection,thePoint);
- myNewPointEditor->setCoordinates(aCoords);
- emit subOperationStarted( myNewPointEditor );
-}
-
-void CurveCreator_Widget::onModifyPoint()
-{
- if( !myEdit )
- return;
- CurveCreator::Coordinates aCoords = myNewPointEditor->getCoordinates();
- myEdit->setCoordinates( aCoords, mySection, myPointNum );
- mySectionView->pointDataChanged( mySection, myPointNum );
- updateUndoRedo();
- onCancelPoint();
-}*/
-
void CurveCreator_Widget::onJoin()
{
if( !myCurve )
if( aSections.size() == 0 ){
return;
}
+ stopActionMode();
+
int aMainSect = aSections[0];
int aMainSectSize = myCurve->getNbPoints(aMainSect);
-// myCurve->startOperation();
for( int i = 1 ; i < aSections.size() ; i++ ){
int aSectNum = aSections[i] - (i-1);
myCurve->join( aMainSect, aSectNum );
mySectionView->sectionsRemoved( aSectNum );
}
-// myCurve->finishOperation();
- int aNewSectSize = myCurve->getNbPoints(aMainSect);
- if( aNewSectSize != aMainSectSize )
- mySectionView->pointsAdded( aMainSect, aMainSectSize, aNewSectSize-aMainSectSize );
updateUndoRedo();
}
{
if( !myCurve )
return;
+ stopActionMode();
myCurve->clear();
mySectionView->reset();
- onSelectionChanged();
+ updateActionsStates();
updateUndoRedo();
}
{
if( !myCurve )
return;
- myCurve->join();
+ stopActionMode();
+ myCurve->join( 0, myCurve->getNbSections()-1 );
mySectionView->reset();
- onSelectionChanged();
+ updateActionsStates();
updateUndoRedo();
}
{
if( !myCurve )
return;
+ stopActionMode();
QList<int> aSelSections = mySectionView->getSelectedSections();
-// myCurve->startOperation();
for( int i = 0 ; i < aSelSections.size() ; i++ ){
myCurve->setSectionType(aSelSections[i], CurveCreator::Spline );
mySectionView->sectionChanged(aSelSections[i]);
}
-// myCurve->finishOperation();
updateUndoRedo();
}
{
if( !myCurve )
return;
-// myCurve->startOperation();
+ stopActionMode();
QList<int> aSelSections = mySectionView->getSelectedSections();
for( int i = 0 ; i < aSelSections.size() ; i++ ){
myCurve->setSectionType( aSelSections[i], CurveCreator::Polyline );
mySectionView->sectionChanged( aSelSections[i] );
}
-// myCurve->finishOperation();
updateUndoRedo();
}
{
if( !myCurve )
return;
-// myCurve->startOperation();
+ stopActionMode();
QList<int> aSelSections = mySectionView->getSelectedSections();
for( int i = 0 ; i < aSelSections.size() ; i++ ){
myCurve->setClosed(aSelSections[i], true);
mySectionView->sectionChanged(aSelSections[i]);
}
-// myCurve->finishOperation();
updateUndoRedo();
}
{
if( !myCurve )
return;
-// myCurve->startOperation();
+ stopActionMode();
QList<int> aSelSections = mySectionView->getSelectedSections();
for( int i = 0 ; i < aSelSections.size() ; i++ ){
myCurve->setClosed(aSelSections[i], false);
mySectionView->sectionChanged(aSelSections[i]);
}
-// myCurve->finishOperation();
updateUndoRedo();
}
if( !myCurve )
return;
- CurveCreator_Widget::SectionToPointList aPoints;
+ CurveCreator_ICurve::SectionToPointList aPoints;
startCurveModification( aPoints, false );
myCurve->undo();
finishCurveModification();
{
if( !myCurve )
return;
- CurveCreator_Widget::SectionToPointList aPoints;
+ CurveCreator_ICurve::SectionToPointList aPoints;
startCurveModification( aPoints, false );
myCurve->redo();
finishCurveModification();
void CurveCreator_Widget::onContextMenu( QPoint thePoint )
{
QList<ActionId> aContextActions;
- aContextActions << CLEAR_ALL_ID << JOIN_ALL_ID << SEPARATOR_ID <<
+ aContextActions << CLEAR_ALL_ID << JOIN_ID << JOIN_ALL_ID << SEPARATOR_ID <<
CLOSE_SECTIONS_ID << UNCLOSE_SECTIONS_ID << SET_SECTIONS_POLYLINE_ID <<
SET_SECTIONS_SPLINE_ID;
QPoint aGlPoint = mySectionView->mapToGlobal(thePoint);
return mySectionView->getSelectedSections();
}
-QList< QPair< int, int > > CurveCreator_Widget::getSelectedPoints()
-{
- return mySectionView->getSelectedPoints();
-}
-
/**
* According to the widget state, performs the remove action
*/
//=================================================================================
-// function : GeometryGUI::onGetCoordsByClick()
+// function : GeometryGUI::addCoordsByClick()
// purpose : Manage mouse press events in Additon mode
//=================================================================================
-void CurveCreator_Widget::onGetCoordsByClick( QMouseEvent* pe )
+void CurveCreator_Widget::addCoordsByClick( QMouseEvent* pe )
{
if (pe->button() != Qt::LeftButton)
return;
if ( pe->modifiers() != Qt::ControlModifier ) {
Handle(AIS_InteractiveContext) ic = getAISContext();
- if ( !ic )
+ if ( ic.IsNull() )
return;
gp_Pnt aPnt;
else
ic->Select(); // New selection
- /*TopoDS_Shape aShape;
-
- ic->InitSelected();
- if ( ic->MoreSelected() )
- aShape = ic->SelectedShape();
-
- if ( !aShape.IsNull() && aShape.ShapeType() == TopAbs_VERTEX )
- aPnt = BRep_Tool::Pnt( TopoDS::Vertex( ic->SelectedShape() ) );
- else*/
{
OCCViewer_ViewPort3d* vp = getViewPort();
aPnt = CurveCreator_Utils::ConvertClickToPoint( pe->x(), pe->y(), vp->getView() );
if ( myCurve->getDimension() == 3 ) {
aCoords.push_back( aPnt.Z() );
}
- onAddNewPoint(aCoords);
-// myNewPointEditor->setCoordinates( aCoords );
+ addNewPoint(aCoords);
}
}
break;
}
case AdditionMode: {
- onGetCoordsByClick( theEvent );
+ addCoordsByClick( theEvent );
break;
}
default:
return;
if ( myDragStarted ) {
- if ( myDragged ) // if the drag of some points has happened, restore the drag selection
- setSelectedPonts( myDragPoints );
+ bool isDragged = myDragged;
+ CurveCreator_ICurve::SectionToPointList aDraggedPoints;
+ QMap<CurveCreator_ICurve::SectionToPoint, std::deque< float > > anInitialDragPointsCoords;
+ if ( myDragged ) {
+ aDraggedPoints = myDragPoints;
+ anInitialDragPointsCoords = myInitialDragPointsCoords;
+ }
+
setDragStarted( false );
+
+ if ( aDraggedPoints.size() > 0 ) {
+ // Collect old coordinates of the dragged points
+ CurveCreator_ICurve::SectionToPointCoordsList anOldPoints;
+ foreach ( const CurveCreator_ICurve::SectionToPoint aSectionToPoint, anInitialDragPointsCoords.keys() ) {
+ CurveCreator::Coordinates aCoords = anInitialDragPointsCoords.value( aSectionToPoint );
+ anOldPoints.push_back( std::make_pair( aSectionToPoint, aCoords ) );
+ }
+
+ if ( myCurve->canPointsBeSorted() ) {
+ // Add old coordinates of the curve points (except the dragged points) to the list
+ for( int aSectionId = 0 ; aSectionId < myCurve->getNbSections() ; aSectionId++ ) {
+ CurveCreator::Coordinates aCoords;
+ for ( int aPointId = 0, aNb = myCurve->getNbPoints( aSectionId ); aPointId < aNb; aPointId++ ) {
+ aCoords = myCurve->getPoint( aSectionId, aPointId );
+ if ( aCoords.size() < 2 ) {
+ continue;
+ }
+
+ CurveCreator_ICurve::SectionToPoint aSectionToPoint = std::make_pair( aSectionId, aPointId );
+
+ if ( !anInitialDragPointsCoords.contains( aSectionToPoint ) ) {
+ anOldPoints.push_back( std::make_pair( aSectionToPoint, aCoords ) );
+ }
+ }
+ }
+
+ // Apply points sorting
+ CurveCreator_ICurve::SectionToPointList aPoints;
+ startCurveModification( aPoints, false );
+
+ myCurve->setSkipSorting( false );
+
+ CurveCreator_ICurve::SectionToPointCoordsList aCoordList;
+ CurveCreator_ICurve::SectionToPointList::const_iterator anIt = aDraggedPoints.begin(),
+ aLast = aDraggedPoints.end();
+ for ( ; anIt != aLast; anIt++ ) {
+ int aSectionId = anIt->first;
+ int aPointId = anIt->second;
+ std::deque<float> aPos = myCurve->getPoint( aSectionId, aPointId );
+
+ aCoordList.push_back(
+ std::make_pair( std::make_pair( aSectionId, aPointId ), aPos ) );
+ }
+
+ myCurve->setSeveralPoints( aCoordList, false );
+
+ finishCurveModification( aDraggedPoints );
+ } else {
+ // if the drag of some points has happened, restore the drag selection
+ START_MEASURE_TIME;
+ setSelectedPoints( aDraggedPoints );
+ END_MEASURE_TIME( "drop" );
+ }
+
+ // Save drag difference
+ myCurve->saveCoordDiff( anOldPoints );
+ }
}
else // check whether the segment is clicked an a new point should be added to the segment
insertPointToSelectedSegment( theEvent->pos().x(), theEvent->pos().y() );
if ( (aPos - myDragStartPosition).manhattanLength() < QApplication::startDragDistance() )
return;
+ START_MEASURE_TIME;
+
moveSelectedPoints( aPos.x(), aPos.y() );
myDragStartPosition = aPos;
+
+ END_MEASURE_TIME( "drag" );
}
/**
void CurveCreator_Widget::onCellChanged( int theRow, int theColumn )
{
- int aCurrSect = getSectionId( theRow );
- int aPntIndex = getPointId( theRow );
+ int aCurrSect = myLocalPointView->getSectionId( theRow );
+ int aPntIndex = myLocalPointView->getPointId( theRow );
if ( aPntIndex < 0 )
return;
- SectionToPointList aSelPoints;
+ CurveCreator_ICurve::SectionToPointList aSelPoints;
startCurveModification( aSelPoints );
double aX = myLocalPointView->item( theRow, 2 )->data( Qt::UserRole ).toDouble();
*/
void CurveCreator_Widget::removeSection()
{
- QList< QPair<int,int> > aSelPoints = mySectionView->getSelectedPoints();
- int aCurrSect=-1;
- int aRemoveCnt = 0;
-// myCurve->startOperation();
- for( int i = 0 ; i < aSelPoints.size() ; i++ ){
- if( aCurrSect != aSelPoints[i].first ){
- aRemoveCnt = 0;
- aCurrSect = aSelPoints[i].first;
- }
- int aPntIndx = aSelPoints[i].second - aRemoveCnt;
- myCurve->removePoint( aCurrSect, aPntIndx );
- mySectionView->pointsRemoved( aCurrSect, aPntIndx );
- aRemoveCnt++;
- }
+ stopActionMode();
+
QList<int> aSections = mySectionView->getSelectedSections();
for( int i = 0 ; i < aSections.size() ; i++ ){
int aSectNum = aSections[i] - (i);
myCurve->removeSection( aSectNum );
mySectionView->sectionsRemoved( aSectNum );
}
-// myCurve->finishOperation();
mySectionView->clearSelection();
updateUndoRedo();
}
*/
void CurveCreator_Widget::removePoint()
{
- SectionToPointList aPoints;
- getSelectedPonts( aPoints );
+ CurveCreator_ICurve::SectionToPointList aPoints;
+ getSelectedPoints( aPoints );
if ( aPoints.size() == 0 )
return;
- SectionToPointList aSelPoints;
+ CurveCreator_ICurve::SectionToPointList aSelPoints;
startCurveModification( aSelPoints, false );
myCurve->removeSeveralPoints( aPoints );
- finishCurveModification( SectionToPointList() );
+ finishCurveModification( CurveCreator_ICurve::SectionToPointList() );
+}
+
+void CurveCreator_Widget::addNewPoint(const CurveCreator::Coordinates& theCoords)
+{
+ if( !myCurve )
+ return;
+ QList<int> aSections = mySectionView->getSelectedSections();
+ if( aSections.size() == 0 ){
+ return;
+ }
+ int aSection = aSections[0];
+ myCurve->addPoints(theCoords, aSection); // add to the end of section
+ updateActionsStates();
+ updateUndoRedo();
}
void CurveCreator_Widget::insertPointToSelectedSegment( const int theX,
const int theY )
{
Handle(AIS_InteractiveContext) aContext = getAISContext();
- if ( !aContext )
+
+ OCCViewer_ViewPort3d* aViewPort = getViewPort();
+ Handle(V3d_View) aView;
+ if ( aViewPort )
+ aView = aViewPort->getView();
+
+ if ( aContext.IsNull() || aView.IsNull() )
return;
gp_Pnt aPoint;
gp_Pnt aPoint1, aPoint2;
- bool isFoundPoint = false;
-
- for ( aContext->InitSelected(); aContext->MoreSelected() && !isFoundPoint;
- aContext->NextSelected() ) {
- TopoDS_Shape aTShape = aContext->SelectedShape();
- if ( !aTShape.IsNull() && aTShape.ShapeType() == TopAbs_VERTEX )
- continue;
- else {
- Handle(SelectMgr_EntityOwner) anOwner = aContext->SelectedOwner();
- if ( anOwner.IsNull() )
- continue;
- const TopLoc_Location& aLocation = anOwner->Location();
- Handle(AIS_InteractiveObject) anAIS = Handle(AIS_InteractiveObject)::DownCast( anOwner->Selectable() );
- isFoundPoint = pointOnObject( anAIS, theX, theY, aPoint, aPoint1, aPoint2 );
- }
- }
+ Handle(AIS_InteractiveObject) anAISObject = myCurve->getAISObject();
+ bool isFoundPoint = CurveCreator_Utils::pointOnObject( aView, anAISObject, theX, theY,
+ aPoint, aPoint1, aPoint2 );
if ( !isFoundPoint )
return;
// insert the point to the model curve
- SectionToPointList aSelPoints;
+ CurveCreator_ICurve::SectionToPointList aSelPoints;
startCurveModification( aSelPoints );
CurveCreator::Coordinates aCoords;
aCoords.push_back( aPoint.X() );
aCoords.push_back( aPoint.Y() );
- SectionToPointList aPoints1, aPoints2;
+ CurveCreator_ICurve::SectionToPointList aPoints1, aPoints2;
findSectionsToPoints( aPoint1.X(), aPoint1.Y(), aPoints1 );
findSectionsToPoints( aPoint2.X(), aPoint2.Y(), aPoints2 );
- SectionToPointList::const_iterator anIt = aPoints1.begin(), aLast = aPoints1.end();
+ CurveCreator_ICurve::SectionToPointList::const_iterator anIt = aPoints1.begin(),
+ aLast = aPoints1.end();
int aSectionId = -1;
// there can be a case when a new point is added into two sections
int aPoint1Id = -1, aPoint2Id = -1;
for ( ; anIt != aLast && aSectionId < 0; anIt++ ) {
int aSectionCur = anIt->first;
- SectionToPointList::const_iterator anIt2 = aPoints2.begin(), aLast2 = aPoints2.end();
+ CurveCreator_ICurve::SectionToPointList::const_iterator anIt2 = aPoints2.begin(),
+ aLast2 = aPoints2.end();
for ( ; anIt2 != aLast2 && aSectionId < 0; anIt2++ ) {
if ( anIt2->first == aSectionCur ) {
aSectionId = aSectionCur;
anInsertPos = aPoint1Id < aPoint2Id ? aPoint1Id + 1 : aPoint2Id + 1;
myCurve->addPoints( aCoords, aSectionId, anInsertPos );
- mySectionView->pointsAdded( aSectionId, myCurve->getNbPoints( aSectionId ) );
finishCurveModification( aSelPoints );
- setSelectedPonts();
+ setSelectedPoints();
}
void CurveCreator_Widget::moveSelectedPoints( const int theXPosition,
if ( !aViewPort )
return;
- SectionToPointList aPoints;
+ CurveCreator_ICurve::SectionToPointList aPoints;
startCurveModification( aPoints, false );
gp_Pnt aStartPnt = CurveCreator_Utils::ConvertClickToPoint( myDragStartPosition.x(),
CurveCreator_ICurve::SectionToPointCoordsList aCoordList;
std::deque<float> aChangedPos;
- SectionToPointList::const_iterator anIt = myDragPoints.begin(), aLast = myDragPoints.end();
+ CurveCreator_ICurve::SectionToPointList::const_iterator anIt = myDragPoints.begin(),
+ aLast = myDragPoints.end();
for ( ; anIt != aLast; anIt++ ) {
int aSectionId = anIt->first;
int aPointId = anIt->second;
aChangedPos = myCurve->getPoint( aSectionId, aPointId );
if ( aChangedPos.size() < 2 )
continue;
+
+ // Remember drag points coordinates
+ if ( !myDragged ) {
+ myInitialDragPointsCoords.insert( std::make_pair( aSectionId, aPointId ), aChangedPos );
+ }
+
aChangedPos[0] = aChangedPos[0] - aXDelta;
aChangedPos[1] = aChangedPos[1] - anYDelta;
std::make_pair(std::make_pair( aSectionId, aPointId ),
aChangedPos ));
}
- myCurve->setSeveralPoints( aCoordList );
+ myCurve->setSeveralPoints( aCoordList, false );
myDragged = true;
finishCurveModification( myDragPoints );
void CurveCreator_Widget::updateLocalPointView()
{
+ if ( myDragStarted )
+ return;
Handle(AIS_InteractiveContext) aContext = getAISContext();
- if ( !aContext )
+ if ( aContext.IsNull() )
return;
- bool isBlocked = myLocalPointView->blockSignals(true);
- gp_Pnt aPnt;
- myLocalPointView->setRowCount( 0 );
- for ( aContext->InitSelected(); aContext->MoreSelected(); aContext->NextSelected() ) {
- TopoDS_Vertex aVertex;
- TopoDS_Shape aShape = aContext->SelectedShape();
- if ( !aShape.IsNull() && aShape.ShapeType() == TopAbs_VERTEX )
- aVertex = TopoDS::Vertex( aContext->SelectedShape() );
- else {
- Handle(SelectMgr_EntityOwner) anOwner = aContext->SelectedOwner();
- if ( !anOwner.IsNull() ) {
- Handle(AIS_InteractiveObject) anAIS = Handle(AIS_InteractiveObject)::DownCast( anOwner->Selectable() );
- if ( !anAIS.IsNull() ) {
- Handle(AIS_Point) aPoint = Handle(AIS_Point)::DownCast( anAIS);
- if ( !aPoint.IsNull() )
- aVertex = TopoDS::Vertex( aPoint->Vertex() );
- }
- if ( aVertex.IsNull() ) {
- // the following happens if there are no points in the current curve, there is only a shape
- /*Handle(StdSelect_BRepOwner) aBrepOwner = Handle(StdSelect_BRepOwner)::DownCast(anOwner);
- if ( aBrepOwner.IsNull() )
- continue;
- if ( aBrepOwner->HasShape() ) {
- const TopoDS_Shape& aShape = aBrepOwner->Shape();
- if ( !aShape.IsNull() && aShape.ShapeType() == TopAbs_VERTEX )
- {
- aVertex = TopoDS::Vertex( aShape );
- }
- }*/
- }
- }
- if ( aVertex.IsNull() )
- continue;
- aPnt = BRep_Tool::Pnt( aVertex );
- addLocalPointToTable( aPnt.X(), aPnt.Y() );
- }
+ CurveCreator_Utils::getSelectedPoints( aContext, myCurve, myLocalPoints );
+ int aNbPoints = myLocalPoints.size();
+
+ bool isRowLimit = aNbPoints > myLocalPointRowLimit;
+ myLocalPointView->setVisible( getActionMode() == ModificationMode && !isRowLimit );
+
+ if ( !isRowLimit ) {
+ bool isBlocked = myLocalPointView->blockSignals(true);
+
+ myLocalPointView->setLocalPointsToTable( myLocalPoints );
+
+ myLocalPointView->blockSignals( isBlocked );
}
- myLocalPointView->blockSignals(isBlocked);
}
/**
*/
void CurveCreator_Widget::setLocalPointContext( const bool theOpen, const bool isUpdateTable )
{
- Handle(AIS_InteractiveContext) ic = getAISContext();
- if ( !ic )
- return;
-
- if ( theOpen ) {
- // Open local context if there is no one
- if ( !ic->HasOpenedContext() ) {
- ic->ClearCurrents( false );
- ic->OpenLocalContext( false/*use displayed objects*/, true/*allow shape decomposition*/ );
- }
- AIS_ListOfInteractive aList;
- ic->DisplayedObjects( aList );
- int aLSize = 0;
- for ( AIS_ListIteratorOfListOfInteractive it( aList ); it.More(); it.Next() )
- aLSize++;
-
- for ( AIS_ListIteratorOfListOfInteractive it( aList ); it.More(); it.Next() )
- {
- Handle(AIS_InteractiveObject) anAIS = it.Value();
- if ( !anAIS.IsNull() )
- {
- if ( anAIS->IsKind( STANDARD_TYPE( AIS_Shape ) ) )
- {
- ic->Load( anAIS, -1/*selection mode*/, true/*allow decomposition*/ );
- ic->Activate( anAIS, AIS_Shape::SelectionMode( (TopAbs_ShapeEnum)TopAbs_WIRE ) );
- }
- else if ( anAIS->DynamicType() != STANDARD_TYPE(AIS_Trihedron) )
- {
- ic->Load( anAIS, -1/*selection mode*/, false/*allow decomposition*/ );
- ic->Activate( anAIS, TopAbs_VERTEX );
- }
- }
- continue;
- }
- }
- else {
- if ( ic->HasOpenedContext() )
- ic->CloseAllContexts();
- if ( isUpdateTable )
- updateLocalPointView();
- }
-}
-
-void CurveCreator_Widget::addLocalPointToTable( const double theX, const double theY )
-{
- SectionToPointList aPoints;
- findSectionsToPoints( theX, theY, aPoints );
-
- SectionToPointList aSkipList;
- // table could not contain two equal value rows
- int aRowId = myLocalPointView->rowCount();
- double aCurrentX, aCurrentY;
- int aSectionId, aPointId;
- SectionToPoint aPoint;
- for ( int i = 0; i < aRowId; i++ ) {
- aCurrentX = myLocalPointView->item( i, 2 )->data( Qt::UserRole ).toDouble();
- aCurrentY = myLocalPointView->item( i, 3 )->data( Qt::UserRole ).toDouble();
- if ( fabs( aCurrentX - theX ) < LOCAL_SELECTION_TOLERANCE &&
- fabs( aCurrentY - theY ) < LOCAL_SELECTION_TOLERANCE ) {
- aPoint = std::make_pair<int, int>( getSectionId( i ), getPointId( i ) );
- if ( !contains( aSkipList, aPoint ) )
- aSkipList.push_back( aPoint );
- }
- }
- if ( aSkipList.size() == aPoints.size() )
- return;
-
- QTableWidgetItem* anItem;
- SectionToPointList::const_iterator anIt = aPoints.begin(), aLast = aPoints.end();
- for ( ; anIt != aLast; anIt++ ) {
- aPoint = *anIt;
- if ( contains( aSkipList, aPoint ) )
- continue;
-
- myLocalPointView->setRowCount( aRowId+1 );
- aSectionId = aPoint.first;
- aPointId = aPoint.second;
-
- anItem = new QTableWidgetItem( myCurve->getSectionName( aSectionId ).c_str() );
- anItem->setFlags( anItem->flags() & ~Qt::ItemIsEnabled );
- anItem->setData( Qt::UserRole, aSectionId );
- myLocalPointView->setItem( aRowId, 0, anItem );
-
- anItem = new QTableWidgetItem( QString::number( aPointId + 1 ) );
- anItem->setFlags( anItem->flags() & ~Qt::ItemIsEnabled );
- anItem->setData( Qt::UserRole, aPointId );
- myLocalPointView->setItem( aRowId, 1, anItem );
-
- anItem = new QTableWidgetItem( QString::number( theX ) );
- anItem->setData( Qt::UserRole, theX );
- myLocalPointView->setItem( aRowId, 2, anItem );
-
- anItem = new QTableWidgetItem( QString::number( theY ) );
- anItem->setData( Qt::UserRole, theY );
- myLocalPointView->setItem( aRowId, 3, anItem );
- }
+ CurveCreator_Utils::setLocalPointContext( myCurve, getAISContext(), theOpen );
+ if ( !theOpen && isUpdateTable )
+ updateLocalPointView();
}
/**
void CurveCreator_Widget::setDragStarted( const bool theState, const QPoint& thePoint )
{
if ( theState ) {
- getSelectedPonts( myDragPoints );
+ getSelectedPoints( myDragPoints );
+
myDragStarted = myDragPoints.size();
myDragStartPosition = thePoint;
if ( myDragStarted ) {
// change a viewer interaction style in order to avoid a select rectangle build
myDragInteractionStyle = changeInteractionStyle( SUIT_ViewModel::KEY_FREE );
+ myCurve->setSkipSorting( true );
}
}
else {
changeInteractionStyle( myDragInteractionStyle );
myDragStarted = false;
myDragPoints.clear();
+ myInitialDragPointsCoords.clear();
}
myDragged = false;
}
-void CurveCreator_Widget::getSelectedPonts( CurveCreator_Widget::SectionToPointList& thePoints )
+void CurveCreator_Widget::getSelectedPoints( CurveCreator_ICurve::SectionToPointList& thePoints )
{
thePoints.clear();
- for ( int i = 0, aNb = myLocalPointView->rowCount(); i < aNb; i++ )
- thePoints.push_back( std::make_pair( getSectionId( i ), getPointId( i ) ) );
+ thePoints = myLocalPoints;
}
-void CurveCreator_Widget::setSelectedPonts( const CurveCreator_Widget::SectionToPointList& thePoints )
+void CurveCreator_Widget::setSelectedPoints( const CurveCreator_ICurve::SectionToPointList& thePoints )
{
- Handle(AIS_InteractiveContext) ic = getAISContext();
- if ( !ic || !ic->HasOpenedContext() )
+ if ( myDragStarted )
+ return;
+ Handle(AIS_InteractiveContext) aContext = getAISContext();
+ if ( aContext.IsNull() || !aContext->HasOpenedContext() )
return;
- AIS_ListOfInteractive aListToSelect;
- AIS_ListOfInteractive aDisplayedList;
- ic->DisplayedObjects( aDisplayedList );
-
- SectionToPointList::const_iterator anIt = thePoints.begin(), aLast = thePoints.end();
- SectionToPoint aSToPoint;
- for( ; anIt != aLast; anIt++ ) {
- aSToPoint = *anIt;
-
- for ( AIS_ListIteratorOfListOfInteractive it( aDisplayedList ); it.More(); it.Next() )
- {
- Handle(AIS_InteractiveObject) anAIS = it.Value();
- if ( anAIS.IsNull() )
- continue;
- Handle(AIS_Point) anAISPoint = Handle(AIS_Point)::DownCast( anAIS );
- if ( anAISPoint.IsNull() )
- continue;
-
- TopoDS_Vertex aVertex = TopoDS::Vertex( anAISPoint->Vertex() );
-
- if ( aVertex.IsNull() )
- continue;
-
- gp_Pnt aPnt = BRep_Tool::Pnt( aVertex );
-
- SectionToPointList aPoints;
- findSectionsToPoints( aPnt.X(), aPnt.Y(), aPoints );
-
- SectionToPointList::const_iterator anIt = aPoints.begin(), aLast = aPoints.end();
- SectionToPoint aPoint;
- for ( ; anIt != aLast; anIt++ ) {
- aPoint = *anIt;
- if ( aPoint.first == aSToPoint.first && aPoint.second == aSToPoint.second )
- aListToSelect.Append( anAIS );
- }
- }
- }
+ CurveCreator_Utils::setSelectedPoints( aContext, myCurve, thePoints );
- ic->ClearSelected( Standard_False );
- setObjectsSelected( aListToSelect );
updateLocalPointView();
}
+void CurveCreator_Widget::stopActionMode()
+{
+ setActionMode( NoneMode );
+}
+
/**
* Get viewer information before perform the curve modification.
* Take a list of selected cuve points an close local context.
* \param theFillPoints a flag whether the selection list should be filled
*/
void CurveCreator_Widget::startCurveModification(
- CurveCreator_Widget::SectionToPointList& thePoints,
+ CurveCreator_ICurve::SectionToPointList& thePoints,
const bool theFillPoints )
{
if ( theFillPoints ) {
thePoints.clear();
- getSelectedPonts( thePoints );
+ getSelectedPoints( thePoints );
}
setLocalPointContext( false );
}
* \param thePoints a list of curve selected points
*/
void CurveCreator_Widget::finishCurveModification(
- const CurveCreator_Widget::SectionToPointList& thePoints )
+ const CurveCreator_ICurve::SectionToPointList& thePoints )
{
if ( getActionMode() == ModificationMode )
setLocalPointContext( true );
- setSelectedPonts( thePoints );
+ setSelectedPoints( thePoints );
updateUndoRedo();
}
*/
int CurveCreator_Widget::findLocalPointIndex( int theSectionId, float theX, float theY )
{
- int aPntIndex = -1;
-
- CurveCreator::Coordinates aCoords;
- for ( int i = 0, aNb = myCurve->getNbPoints( theSectionId ); i < aNb && aPntIndex < 0; i++ ) {
- aCoords = myCurve->getPoint( theSectionId, i );
- if ( aCoords.size() < 2 )
- continue;
- if ( fabs( aCoords[0] - theX ) < LOCAL_SELECTION_TOLERANCE &&
- fabs( aCoords[1] - theY ) < LOCAL_SELECTION_TOLERANCE )
- aPntIndex = i;
- }
-
- return aPntIndex;
+ return CurveCreator_UtilsICurve::findLocalPointIndex( myCurve, theSectionId, theX, theY );
}
void CurveCreator_Widget::findSectionsToPoints( const double theX, const double theY,
- CurveCreator_Widget::SectionToPointList& thePoints )
+ CurveCreator_ICurve::SectionToPointList& thePoints )
{
- thePoints.clear();
-
- int aPointId = -1;
- for ( int i = 0, aNb = myCurve->getNbSections(); i < aNb; i++ ) {
- aPointId = findLocalPointIndex( i, theX, theY );
- if ( aPointId < 0 )
- continue;
- SectionToPoint aPoint = std::make_pair( i, aPointId );
- if ( !contains( thePoints, aPoint ) )
- thePoints.push_back( aPoint );
- }
+ return CurveCreator_UtilsICurve::findSectionsToPoints( myCurve, theX, theY, thePoints );
}
-void CurveCreator_Widget::convert( const SectionToPointList& thePoints,
+void CurveCreator_Widget::convert( const CurveCreator_ICurve::SectionToPointList& thePoints,
QMap<int, QList<int> >& theConvPoints )
{
- theConvPoints.clear();
-
- SectionToPointList::const_iterator anIt = thePoints.begin(), aLast = thePoints.end();
- QList<int> aPoints;
- int aSectionId, aPointId;
- for ( ; anIt != aLast; anIt++ ) {
- aSectionId = anIt->first;
- aPointId = anIt->second;
- aPoints.clear();
- if ( theConvPoints.contains( aSectionId ) )
- aPoints = theConvPoints[aSectionId];
- if ( aPoints.contains( aPointId ) )
- continue;
- aPoints.append( aPointId );
- theConvPoints[aSectionId] = aPoints;
- }
-}
-
-/**
- * Checks whether the point belongs to the OCC object
- * \param theObject a line or shape with a bspline inside
- * \param theX the X coordinate in the view.
- * \param theY the Y coordinate in the view.
- * \param thePoint the output point to be append to the model curve
- * \param thePoint1 the output point to bound the line where a new point should be inserted
- * \param thePoint2 the output point to bound the line where a new point should be inserted
- */
-bool CurveCreator_Widget::pointOnObject( Handle(AIS_InteractiveObject) theObject,
- const int theX, const int theY,
- gp_Pnt& thePoint,
- gp_Pnt& thePoint1, gp_Pnt& thePoint2 )
-{
- bool isFound = false;
-
- Handle(AIS_InteractiveContext) aContext = getAISContext();
- if ( theObject.IsNull() || !aContext )
- return isFound;
-
- gp_Pnt aPoint;
- Standard_Real aParameter;
- gp_Pnt aPnt1, aPnt2;
- Handle(AIS_Line) aLine = Handle(AIS_Line)::DownCast( theObject );
- if ( !aLine.IsNull() ) {
- const Handle(Geom_Line) aGLine = aLine->Line();
- isFound = hasProjectPointOnCurve( theX, theY, aGLine, aParameter );
- if ( isFound ) {
- aPoint = aGLine->Value( aParameter );
-
- Handle(Geom_Point) aPStart;
- Handle(Geom_Point) aPEnd;
- aLine->Points( aPStart, aPEnd );
- aPnt1 = aPStart->Pnt();
- aPnt2 = aPEnd->Pnt();
-
- // in case of Geom line a projection is performed to the infinite line,
- // so it is necessary to bound it by the line size
- Bnd_Box aLineBox;
- aLineBox.Set( aPnt1, gp_Vec( aPnt1, aPnt2 ) );
- isFound = !aLineBox.IsOut( aPoint );
- }
- }
- else {
- Handle(AIS_Shape) aShape = Handle(AIS_Shape)::DownCast( theObject );
- if ( !aShape.IsNull() ) {
- const TopoDS_Wire& aWire = TopoDS::Wire( aShape->Shape() );
- if ( !aWire.IsNull() ) {
- TopExp_Explorer anExp( aWire, TopAbs_EDGE );
- for ( ; anExp.More(); anExp.Next())
- {
- const TopoDS_Edge& anEdge = TopoDS::Edge(anExp.Current());
- if ( !anEdge.IsNull() ) {
- Standard_Real aFirst, aLast;
- Handle(Geom_Curve) aCurve = BRep_Tool::Curve( anEdge, aFirst, aLast );
-
- if ( aCurve->IsKind( STANDARD_TYPE(Geom_BSplineCurve) ) ) {
- Handle(Geom_BSplineCurve) aBSplineCurve = Handle(Geom_BSplineCurve)::DownCast( aCurve );
- if ( !aBSplineCurve.IsNull() ) {
- isFound = hasProjectPointOnCurve( theX, theY, aCurve, aParameter );
- if ( isFound ) {
- aPoint = aBSplineCurve->Value( aParameter );
- Standard_Integer anI1, anI2;
- aBSplineCurve->LocateU( aParameter, LOCAL_SELECTION_TOLERANCE, anI1, anI2 );
-
- aPnt1 = aBSplineCurve->Value( aBSplineCurve->Knot( anI1 ) );
- aPnt2 = aBSplineCurve->Value( aBSplineCurve->Knot( anI2 ) );
- }
- }
- }
- }
- }
- }
- }
- }
- if ( isFound ) {
- thePoint = aPoint;
- thePoint1 = aPnt1;
- thePoint2 = aPnt2;
- }
- return isFound;
-}
-
-/**
- * Returns whether the clicked point belong to the curve or has a very near projection
- * \param theX the X coordinate of a point clicked in the OCC viewer
- * \param theY the Y coordinate of a point clicked in the OCC viewer
- * \param theCurve a geometry curve
- * \param theOutPoint a found projected point on the curve
- */
-bool CurveCreator_Widget::hasProjectPointOnCurve( const int theX, const int theY,
- const Handle(Geom_Curve)& theCurve,
- Standard_Real& theParameter )
-{
- bool isFound = false;
- OCCViewer_ViewPort3d* aViewPort = getViewPort();
- if ( !aViewPort )
- return isFound;
-
- Handle(V3d_View) aView = aViewPort->getView();
- gp_Pnt aPoint = CurveCreator_Utils::ConvertClickToPoint( theX, theY, aView );
-
- GeomAPI_ProjectPointOnCurve aProj( aPoint, theCurve );
- Standard_Integer aNbPoint = aProj.NbPoints();
- if (aNbPoint > 0) {
- for (Standard_Integer j = 1; j <= aNbPoint && !isFound; j++) {
- gp_Pnt aNewPoint = aProj.Point( j );
- theParameter = aProj.Parameter( j );
-
- int aX, anY;
- CurveCreator_Utils::ConvertPointToClick( aNewPoint, aView, aX, anY );
-
- int aXDelta = abs( aX - theX );
- int anYDelta = abs( anY - theY );
- isFound = aXDelta < SCENE_PIXEL_TOLERANCE && anYDelta < SCENE_PIXEL_TOLERANCE;
- }
- }
- return isFound;
-}
-
-/**
- * Returns a section index from the table
- * \param theRowId a table row
- */
-int CurveCreator_Widget::getSectionId( const int theRowId ) const
-{
- return myLocalPointView->item( theRowId, 0 )->data( Qt::UserRole ).toInt();
-}
-
-/**
- * Returns a point index from the table
- * \param theRowId a table row
- */
-int CurveCreator_Widget::getPointId( const int theRowId ) const
-{
- return myLocalPointView->item( theRowId, 1 )->data( Qt::UserRole ).toInt();
+ return CurveCreator_UtilsICurve::convert( thePoints, theConvPoints );
}
/**
* \param theList a container of values
* \param theValue a value
*/
-bool CurveCreator_Widget::contains( const CurveCreator_Widget::SectionToPointList& theList,
- const CurveCreator_Widget::SectionToPoint& theValue ) const
+bool CurveCreator_Widget::contains( const CurveCreator_ICurve::SectionToPointList& theList,
+ const CurveCreator_ICurve::SectionToPoint& theValue ) const
{
- bool isFound = false;
-
- SectionToPointList::const_iterator anIt = theList.begin(), aLast = theList.end();
- for ( ; anIt != aLast && !isFound; anIt++ )
- isFound = anIt->first == theValue.first && anIt->second == theValue.second;
-
- return isFound;
+ return CurveCreator_UtilsICurve::contains( theList, theValue );
}