// Created: 12 May 2015
// Author: Dmitry Bobylev
-#include <GeomAlgoAPI_Revolution.h>
+#include "GeomAlgoAPI_Revolution.h"
+#include <GeomAPI_Face.h>
+#include <GeomAPI_ShapeExplorer.h>
#include <GeomAlgoAPI_DFLoader.h>
#include <GeomAlgoAPI_MakeShapeList.h>
-#include <GeomAlgoAPI_Rotation.h>
-#include <GeomAlgoAPI_ShapeProps.h>
+#include <GeomAlgoAPI_ShapeTools.h>
#include <BRep_Builder.hxx>
#include <BRep_Tool.hxx>
#include <BRepPrimAPI_MakeRevol.hxx>
#include <BRepGProp.hxx>
#include <Geom_Plane.hxx>
-#include <Geom_RectangularTrimmedSurface.hxx>
#include <GeomLib_IsPlanarSurface.hxx>
#include <gp_Pln.hxx>
#include <GProp_GProps.hxx>
#include <TopExp_Explorer.hxx>
#include <TopoDS.hxx>
+#include <TopTools_ListIteratorOfListOfShape.hxx>
-//=================================================================================================
-GeomAlgoAPI_Revolution::GeomAlgoAPI_Revolution(std::shared_ptr<GeomAPI_Shape> theBasis,
- std::shared_ptr<GeomAPI_Ax1> theAxis,
- double theFromAngle,
- double theToAngle)
-: myDone(false)
-{
- build(theBasis, theAxis, std::shared_ptr<GeomAPI_Shape>(), theFromAngle, std::shared_ptr<GeomAPI_Shape>(), theToAngle);
-}
+/// \brief Constructs infinite face from thePlane, and with axis located on the same side
+/// of the plane as thePoint. Modifies thePlane axis direction.
+/// \param[in,out] thePlane plane to construct face.
+/// \param[in] thePoint point to locate plane axis.
+/// \return constructed face.
+static TopoDS_Face makeFaceFromPlane(gp_Pln& thePlane, const gp_Pnt& thePoint);
-//=================================================================================================
-GeomAlgoAPI_Revolution::GeomAlgoAPI_Revolution(std::shared_ptr<GeomAPI_Shape> theBasis,
- std::shared_ptr<GeomAPI_Ax1> theAxis,
- std::shared_ptr<GeomAPI_Shape> theFromShape,
- double theFromAngle,
- std::shared_ptr<GeomAPI_Shape> theToShape,
- double theToAngle)
-: myDone(false)
-{
- build(theBasis, theAxis, theFromShape, theFromAngle, theToShape, theToAngle);
-}
+/// \return solid created from face or shell.
+static TopoDS_Solid makeSolidFromShape(const TopoDS_Shape& theShape);
-//=================================================================================================
-TopoDS_Face GeomAlgoAPI_Revolution::makeFaceFromPlane(gp_Pln& thePlane, const gp_Pnt& thePoint)
-{
- gp_XYZ aVec = thePoint.XYZ() - thePlane.Location().XYZ();
- double aSign = aVec * thePlane.Axis().Direction().XYZ();
- if(aSign < 0) thePlane.SetAxis(thePlane.Axis().Reversed());
-
- BRepBuilderAPI_MakeFace aMakeFace(thePlane);
- TopoDS_Face aResultFace = TopoDS::Face(aMakeFace.Shape());
-
- return aResultFace;
-}
+/// \brief Selects solid from theShape with closest center of mass to thePoint
+/// \param[in] theShape compound with solids.
+/// \param[in] thePoint point.
+/// \return solid.
+static TopoDS_Shape findClosest(const TopoDS_Shape& theShape, const gp_Pnt& thePoint);
//=================================================================================================
-TopoDS_Solid GeomAlgoAPI_Revolution::makeSolidFromFace(const TopoDS_Face& theFace)
+GeomAlgoAPI_Revolution::GeomAlgoAPI_Revolution(std::shared_ptr<GeomAPI_Shape> theBaseShape,
+ std::shared_ptr<GeomAPI_Ax1> theAxis,
+ double theToAngle,
+ double theFromAngle)
{
- TopoDS_Shell aShell;
- TopoDS_Solid aSolid;
-
- BRep_Builder aBoundingBuilder;
- aBoundingBuilder.MakeShell(aShell);
- aBoundingBuilder.Add(aShell, theFace);
- aBoundingBuilder.MakeSolid(aSolid);
- aBoundingBuilder.Add(aSolid, aShell);
-
- return aSolid;
+ build(theBaseShape, theAxis, std::shared_ptr<GeomAPI_Shape>(), theToAngle, std::shared_ptr<GeomAPI_Shape>(), theFromAngle);
}
//=================================================================================================
-TopoDS_Shape GeomAlgoAPI_Revolution::findClosest(const TopoDS_Shape& theShape, const gp_Pnt& thePoint)
+GeomAlgoAPI_Revolution::GeomAlgoAPI_Revolution(std::shared_ptr<GeomAPI_Shape> theBaseShape,
+ std::shared_ptr<GeomAPI_Ax1> theAxis,
+ std::shared_ptr<GeomAPI_Shape> theToShape,
+ double theToAngle,
+ std::shared_ptr<GeomAPI_Shape> theFromShape,
+ double theFromAngle)
{
- TopoDS_Shape aResult = theShape;
-
- if(theShape.ShapeType() == TopAbs_COMPOUND) {
- double aMinDistance = Precision::Infinite();
- double aCurDistance;
- GProp_GProps aGProps;
- gp_Pnt aCentr;
-
- for (TopoDS_Iterator anItr(theShape); anItr.More(); anItr.Next()) {
- TopoDS_Shape aValue = anItr.Value();
- BRepGProp::VolumeProperties(aValue, aGProps);
- aCentr = aGProps.CentreOfMass();
- aCurDistance = aCentr.Distance(thePoint);
-
- if(aCurDistance < aMinDistance) {
- aMinDistance = aCurDistance;
- aResult = aValue;
- }
- }
- }
-
- return aResult;
+ build(theBaseShape, theAxis, theToShape, theToAngle, theFromShape, theFromAngle);
}
//=================================================================================================
-void GeomAlgoAPI_Revolution::build(const std::shared_ptr<GeomAPI_Shape>& theBasis,
+void GeomAlgoAPI_Revolution::build(const std::shared_ptr<GeomAPI_Shape>& theBaseShape,
const std::shared_ptr<GeomAPI_Ax1>& theAxis,
- const std::shared_ptr<GeomAPI_Shape>& theFromShape,
- double theFromAngle,
const std::shared_ptr<GeomAPI_Shape>& theToShape,
- double theToAngle)
+ double theToAngle,
+ const std::shared_ptr<GeomAPI_Shape>& theFromShape,
+ double theFromAngle)
{
- if(!theBasis || !theAxis ||
+ if(!theBaseShape || !theAxis ||
(((!theFromShape && !theToShape) || (theFromShape && theToShape && theFromShape->isEqual(theToShape)))
- && (theFromAngle == 0.0 && theToAngle == 0.0))) {
+ && (theFromAngle == -theToAngle))) {
return;
}
- TopoDS_Face aBasisFace = TopoDS::Face(theBasis->impl<TopoDS_Shape>());
- GeomLib_IsPlanarSurface isBasisPlanar(BRep_Tool::Surface(aBasisFace));
- if(!isBasisPlanar.IsPlanar()) {// non-planar shapes is not supported for revolution
+ // Geting base plane.
+ const TopoDS_Shape& aBaseShape = theBaseShape->impl<TopoDS_Shape>();
+ TopoDS_Face aBaseFace;
+ if(theBaseShape->shapeType() == GeomAPI_Shape::FACE) {
+ aBaseFace = TopoDS::Face(theBaseShape->impl<TopoDS_Shape>());
+ } else if(theBaseShape->shapeType() == GeomAPI_Shape::SHELL) {
+ GeomAPI_ShapeExplorer anExp(theBaseShape, GeomAPI_Shape::FACE);
+ if(anExp.more()) {
+ std::shared_ptr<GeomAPI_Shape> aFaceOnShell = anExp.current();
+ aBaseFace = TopoDS::Face(aFaceOnShell->impl<TopoDS_Shape>());
+ }
+ }
+ if(aBaseFace.IsNull()) {
return;
}
- gp_Pln aBasisPln = isBasisPlanar.Plan();
+ GeomLib_IsPlanarSurface isBasePlanar(BRep_Tool::Surface(aBaseFace));
+ gp_Pln aBasePln = isBasePlanar.Plan();
+ Geom_Plane aBasePlane(aBasePln);
gp_Ax1 anAxis = theAxis->impl<gp_Ax1>();
+ if(aBasePlane.Axis().Angle(anAxis) < Precision::Confusion()) {
+ return;
+ }
- ListOfMakeShape aListOfMakeShape;
- myFirst = std::make_shared<GeomAPI_Shape>();
- myLast = std::make_shared<GeomAPI_Shape>();
+ gp_Pnt aBaseCentre = GeomAlgoAPI_ShapeTools::centreOfMass(theBaseShape)->impl<gp_Pnt>();
TopoDS_Shape aResult;
if(!theFromShape && !theToShape) { // Case 1: When only angles was set.
// Rotating base face with the negative value of "from angle".
gp_Trsf aBaseTrsf;
aBaseTrsf.SetRotation(anAxis, -theFromAngle / 180.0 * M_PI);
- BRepBuilderAPI_Transform* aBaseTransform = new BRepBuilderAPI_Transform(aBasisFace,
+ BRepBuilderAPI_Transform* aBaseTransform = new BRepBuilderAPI_Transform(aBaseShape,
aBaseTrsf,
true);
- aListOfMakeShape.push_back(std::make_shared<GeomAlgoAPI_MakeShape>(aBaseTransform));
- TopoDS_Shape aRotatedBaseShape = aBaseTransform->Shape();
+ if(!aBaseTransform) {
+ return;
+ }
+ this->appendAlgo(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aBaseTransform)));
+ if(!aBaseTransform->IsDone()) {
+ return;
+ }
+ TopoDS_Shape aRotatedBase = aBaseTransform->Shape();
// Making revolution to the angle equal to the sum of "from angle" and "to angle".
- double anAngle = theFromAngle + theToAngle;
- BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aRotatedBaseShape,
- anAxis,
- anAngle / 180 * M_PI,
- Standard_True);
- aRevolBuilder->Build();
+ BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aRotatedBase,
+ anAxis,
+ (theFromAngle + theToAngle) / 180 * M_PI,
+ Standard_True);
+ if(!aRevolBuilder) {
+ return;
+ }
+ this->appendAlgo(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aRevolBuilder)));
if(!aRevolBuilder->IsDone()) {
return;
}
- aListOfMakeShape.push_back(std::make_shared<GeomAlgoAPI_MakeShape>(aRevolBuilder));
aResult = aRevolBuilder->Shape();
// Setting naming.
- myFirst->setImpl(new TopoDS_Shape(aRevolBuilder->FirstShape()));
- myLast->setImpl(new TopoDS_Shape(aRevolBuilder->LastShape()));
+ for(TopExp_Explorer anExp(aRotatedBase, TopAbs_FACE); anExp.More(); anExp.Next()) {
+ const TopoDS_Shape& aFace = anExp.Current();
+ std::shared_ptr<GeomAPI_Shape> aFromShape(new GeomAPI_Shape), aToShape(new GeomAPI_Shape);
+ aFromShape->setImpl(new TopoDS_Shape(aRevolBuilder->FirstShape(aFace)));
+ aToShape->setImpl(new TopoDS_Shape(aRevolBuilder->LastShape(aFace)));
+ this->addFromFace(aFromShape);
+ this->addToFace(aToShape);
+ }
} else if(theFromShape && theToShape) { // Case 2: When both bounding planes were set.
+ // Making revolution to the 360 angle.
+ BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aBaseShape, anAxis, 2 * M_PI, Standard_True);
+ if(!aRevolBuilder) {
+ return;
+ }
+ this->appendAlgo(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aRevolBuilder)));
+ if(!aRevolBuilder->IsDone()) {
+ return;
+ }
+ aResult = aRevolBuilder->Shape();
+
// Getting bounding faces.
TopoDS_Face aFromFace = TopoDS::Face(theFromShape->impl<TopoDS_Shape>());
TopoDS_Face aToFace = TopoDS::Face(theToShape->impl<TopoDS_Shape>());
// Orienting bounding planes properly so that the center of mass of the base face stays
// on the result shape after cut.
- gp_Pnt aBasisCentr = GeomAlgoAPI_ShapeProps::centreOfMass(theBasis)->impl<gp_Pnt>();
- aFromFace = makeFaceFromPlane(aFromPln, aBasisCentr);
- aToFace = makeFaceFromPlane(aToPln, aBasisCentr);
+ aFromFace = makeFaceFromPlane(aFromPln, aBaseCentre);
+ aToFace = makeFaceFromPlane(aToPln, aBaseCentre);
// Making solids from bounding planes and putting them in compound.
- TopoDS_Shape aFromSolid = makeSolidFromFace(aFromFace);
- TopoDS_Shape aToSolid = makeSolidFromFace(aToFace);
+ TopoDS_Shape aFromSolid = makeSolidFromShape(aFromFace);
+ TopoDS_Shape aToSolid = makeSolidFromShape(aToFace);
// Rotating bounding planes to the specified angle.
gp_Trsf aFromTrsf;
gp_Trsf aToTrsf;
- double aFromRotAngle = ((aFromPln.Axis().Direction() * aBasisPln.Axis().Direction()) > 0) ? -theFromAngle : theFromAngle;
- double aToRotAngle = ((aToPln.Axis().Direction() * aBasisPln.Axis().Direction()) > 0) ? -theToAngle : theToAngle;
+ double aFromRotAngle = ((aFromPln.Axis().Direction() * aBasePln.Axis().Direction()) > 0) ? -theFromAngle : theFromAngle;
+ double aToRotAngle = ((aToPln.Axis().Direction() * aBasePln.Axis().Direction()) > 0) ? -theToAngle : theToAngle;
aFromTrsf.SetRotation(anAxis,aFromRotAngle / 180.0 * M_PI);
aToTrsf.SetRotation(anAxis, aToRotAngle / 180.0 * M_PI);
BRepBuilderAPI_Transform aFromTransform(aFromSolid, aFromTrsf, true);
aFromSolid = aFromTransform.Shape();
aToSolid = aToTransform.Shape();
- // Making revolution to the 360 angle.
- BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aBasisFace, anAxis, 2 * M_PI, Standard_True);
- aRevolBuilder->Build();
- aListOfMakeShape.push_back(std::make_shared<GeomAlgoAPI_MakeShape>(aRevolBuilder));
- TopoDS_Shape aRevolShape = aRevolBuilder->Shape();
-
// Cutting revolution with from plane.
- BRepAlgoAPI_Cut* aFromCutBuilder = new BRepAlgoAPI_Cut(aRevolShape, aFromSolid);
+ BRepAlgoAPI_Cut* aFromCutBuilder = new BRepAlgoAPI_Cut(aResult, aFromSolid);
aFromCutBuilder->Build();
if(!aFromCutBuilder->IsDone()) {
return;
}
- aListOfMakeShape.push_back(std::make_shared<GeomAlgoAPI_MakeShape>(aFromCutBuilder));
+ this->appendAlgo(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aFromCutBuilder)));
aResult = aFromCutBuilder->Shape();
// Cutting revolution with to plane.
if(!aToCutBuilder->IsDone()) {
return;
}
- aListOfMakeShape.push_back(std::make_shared<GeomAlgoAPI_MakeShape>(aToCutBuilder));
+ this->appendAlgo(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aToCutBuilder)));
aResult = aToCutBuilder->Shape();
+ TopExp_Explorer anExp(aResult, TopAbs_SOLID);
+ if(!anExp.More()) {
+ return;
+ }
+ if(aResult.ShapeType() == TopAbs_COMPOUND) {
+ aResult = GeomAlgoAPI_DFLoader::refineResult(aResult);
+ }
+ if(aResult.ShapeType() == TopAbs_COMPOUND) {
+ std::shared_ptr<GeomAPI_Shape> aCompound(new GeomAPI_Shape);
+ aCompound->setImpl(new TopoDS_Shape(aResult));
+ ListOfShape aCompSolids, aFreeSolids;
+ GeomAlgoAPI_ShapeTools::combineShapes(aCompound, GeomAPI_Shape::COMPSOLID, aCompSolids, aFreeSolids);
+ if(aCompSolids.size() == 1 && aFreeSolids.size() == 0) {
+ aResult = aCompSolids.front()->impl<TopoDS_Shape>();
+ } else if (aCompSolids.size() > 1 || (aCompSolids.size() >= 1 && aFreeSolids.size() >= 1)) {
+ TopoDS_Compound aResultComp;
+ TopoDS_Builder aBuilder;
+ aBuilder.MakeCompound(aResultComp);
+ for(ListOfShape::const_iterator anIter = aCompSolids.cbegin(); anIter != aCompSolids.cend(); anIter++) {
+ aBuilder.Add(aResultComp, (*anIter)->impl<TopoDS_Shape>());
+ }
+ for(ListOfShape::const_iterator anIter = aFreeSolids.cbegin(); anIter != aFreeSolids.cend(); anIter++) {
+ aBuilder.Add(aResultComp, (*anIter)->impl<TopoDS_Shape>());
+ }
+ aResult = aResultComp;
+ }
+ }
+
// If after cut we got more than one solids then take closest to the center of mass of the base face.
- aResult = findClosest(aResult, aBasisCentr);
+ aResult = findClosest(aResult, aBaseCentre);
// Setting naming.
for(TopExp_Explorer anExp(aResult, TopAbs_FACE); anExp.More (); anExp.Next ()) {
Handle(Geom_Surface) aFromSurface = BRep_Tool::Surface(TopoDS::Face(aRotatedFromFace));
Handle(Geom_Surface) aToSurface = BRep_Tool::Surface(TopoDS::Face(aRotatedToFace));
if(aFaceSurface == aFromSurface) {
- myFirst->setImpl(new TopoDS_Shape(aFaceOnResult));
+ std::shared_ptr<GeomAPI_Shape> aFSHape(new GeomAPI_Shape);
+ aFSHape->setImpl(new TopoDS_Shape(aFaceOnResult));
+ this->addFromFace(aFSHape);
}
if(aFaceSurface == aToSurface) {
- myLast->setImpl(new TopoDS_Shape(aFaceOnResult));
+ std::shared_ptr<GeomAPI_Shape> aTSHape(new GeomAPI_Shape);
+ aTSHape->setImpl(new TopoDS_Shape(aFaceOnResult));
+ this->addToFace(aTSHape);
}
}
} else { //Case 3: When only one bounding plane was set.
+ // Making revolution to the 360 angle.
+ BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aBaseShape, anAxis, 2 * M_PI, Standard_True);
+ if(!aRevolBuilder) {
+ return;
+ }
+ this->appendAlgo(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aRevolBuilder)));
+ if(!aRevolBuilder->IsDone()) {
+ return;
+ }
+ aResult = aRevolBuilder->Shape();
+
// Getting bounding face.
TopoDS_Face aBoundingFace;
bool isFromFaceSet = false;
// Orienting bounding plane properly so that the center of mass of the base face stays
// on the result shape after cut.
- gp_Pnt aBasisCentr = GeomAlgoAPI_ShapeProps::centreOfMass(theBasis)->impl<gp_Pnt>();
- aBoundingFace = makeFaceFromPlane(aBoundingPln, aBasisCentr);
+ aBoundingFace = makeFaceFromPlane(aBoundingPln, aBaseCentre);
// Making solid from bounding plane.
- TopoDS_Shape aBoundingSolid = makeSolidFromFace(aBoundingFace);
+ TopoDS_Shape aBoundingSolid = makeSolidFromShape(aBoundingFace);
// Rotating bounding plane to the specified angle.
double aBoundingRotAngle = isFromFaceSet ? theFromAngle : theToAngle;
- if(aBoundingPln.Axis().IsParallel(aBasisPln.Axis(), Precision::Confusion())) {
+ if(aBoundingPln.Axis().IsParallel(aBasePln.Axis(), Precision::Confusion())) {
if(isFromFaceSet) aBoundingRotAngle = -aBoundingRotAngle;
} else {
- double aSign = (aBoundingPln.Axis().Direction() ^ aBasisPln.Axis().Direction()) *
+ double aSign = (aBoundingPln.Axis().Direction() ^ aBasePln.Axis().Direction()) *
anAxis.Direction();
if((aSign <= 0 && !isFromFaceSet) || (aSign > 0 && isFromFaceSet)) {
aBoundingRotAngle = -aBoundingRotAngle;
TopoDS_Shape aRotatedBoundingFace = aBoundingTransform.Modified(aBoundingFace).First();
aBoundingSolid = aBoundingTransform.Shape();
- // Making revolution to the 360 angle.
- BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aBasisFace, anAxis, 2 * M_PI, Standard_True);
- aRevolBuilder->Build();
- aListOfMakeShape.push_back(std::make_shared<GeomAlgoAPI_MakeShape>(aRevolBuilder));
- TopoDS_Shape aRevolShape = aRevolBuilder->Shape();
-
// Cutting revolution with bounding plane.
- BRepAlgoAPI_Cut* aBoundingCutBuilder = new BRepAlgoAPI_Cut(aRevolShape, aBoundingSolid);
+ BRepAlgoAPI_Cut* aBoundingCutBuilder = new BRepAlgoAPI_Cut(aResult, aBoundingSolid);
aBoundingCutBuilder->Build();
if(!aBoundingCutBuilder->IsDone()) {
return;
}
- aListOfMakeShape.push_back(std::make_shared<GeomAlgoAPI_MakeShape>(aBoundingCutBuilder));
+ this->appendAlgo(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aBoundingCutBuilder)));
aResult = aBoundingCutBuilder->Shape();
- TopExp_Explorer anExp1(aResult, TopAbs_SOLID);
// Setting naming.
- if(aBoundingCutBuilder->Modified(aBoundingFace).Extent() > 0) {
- std::shared_ptr<GeomAPI_Shape> aPtr = isFromFaceSet ? myFirst : myLast;
- aPtr->setImpl(new TopoDS_Shape(aBoundingCutBuilder->Modified(aBoundingFace).First()));
+ const TopTools_ListOfShape& aBndShapes = aBoundingCutBuilder->Modified(aBoundingFace);
+ for(TopTools_ListIteratorOfListOfShape anIt(aBndShapes); anIt.More(); anIt.Next()) {
+ std::shared_ptr<GeomAPI_Shape> aShape(new GeomAPI_Shape());
+ aShape->setImpl(new TopoDS_Shape(anIt.Value()));
+ isFromFaceSet ? this->addFromFace(aShape) : this->addToFace(aShape);
}
// Try to cut with base face. If it can not be done then keep result of cut with bounding plane.
+ TopoDS_Shape aModifiedBaseShape = aBaseShape;
if(isFromFaceSet) {
- aBasisFace.Orientation(TopAbs_REVERSED);
+ if(aModifiedBaseShape.ShapeType() == TopAbs_FACE) {
+ aModifiedBaseShape.Orientation(TopAbs_REVERSED);
+ } else {
+ gp_Trsf aMirrorTrsf;
+ aMirrorTrsf.SetMirror(aBasePlane.Position().Ax2());
+ BRepBuilderAPI_Transform aMirrorTransform(aModifiedBaseShape, aMirrorTrsf, true);
+ aModifiedBaseShape = aMirrorTransform.Shape();
+ }
}
- // Making solid from basis face.
- TopoDS_Shape aBasisSolid = makeSolidFromFace(aBasisFace);
-
- // Rotating basis face to the specified angle.
- gp_Trsf aBasisTrsf;
- double aBasisRotAngle = isFromFaceSet ? theToAngle : -theFromAngle;
- aBasisTrsf.SetRotation(anAxis, aBasisRotAngle / 180.0 * M_PI);
- BRepBuilderAPI_Transform aBasisTransform(aBasisSolid, aBasisTrsf, true);
- TopoDS_Shape aRotatedBasisFace = aBasisTransform.Modified(aBasisFace).First();
- aBasisSolid = aBasisTransform.Shape();
-
- // Cutting revolution with basis face.
- BRepAlgoAPI_Cut* aBasisCutBuilder = new BRepAlgoAPI_Cut(aResult, aBasisSolid);
- aBasisCutBuilder->Build();
- if(aBasisCutBuilder->IsDone()) {
- TopoDS_Shape aCutResult = aBasisCutBuilder->Shape();
+ // Making solid from base face.
+ TopoDS_Shape aBaseSolid = makeSolidFromShape(aModifiedBaseShape);
+
+ // Rotating base face to the specified angle.
+ gp_Trsf aBaseTrsf;
+ double aBaseRotAngle = isFromFaceSet ? theToAngle : -theFromAngle;
+ aBaseTrsf.SetRotation(anAxis, aBaseRotAngle / 180.0 * M_PI);
+ BRepBuilderAPI_Transform aBaseTransform(aBaseSolid, aBaseTrsf, true);
+ aBaseSolid = aBaseTransform.Shape();
+
+ // Cutting revolution with base.
+ BRepAlgoAPI_Cut* aBaseCutBuilder = new BRepAlgoAPI_Cut(aResult, aBaseSolid);
+ aBaseCutBuilder->Build();
+ if(aBaseCutBuilder->IsDone()) {
+ TopoDS_Shape aCutResult = aBaseCutBuilder->Shape();
TopExp_Explorer anExp(aCutResult, TopAbs_SOLID);
if(anExp.More()) {
- aListOfMakeShape.push_back(std::make_shared<GeomAlgoAPI_MakeShape>(aBasisCutBuilder));
+ this->appendAlgo(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aBaseCutBuilder)));
aResult = aCutResult;
}
}
+ const TopTools_ListOfShape& aBsShapes = aBaseCutBuilder->Modified(aBoundingFace);
+ for(TopTools_ListIteratorOfListOfShape anIt(aBsShapes); anIt.More(); anIt.Next()) {
+ std::shared_ptr<GeomAPI_Shape> aShape(new GeomAPI_Shape());
+ aShape->setImpl(new TopoDS_Shape(anIt.Value()));
+ isFromFaceSet ? this->addToFace(aShape) : this->addFromFace(aShape);
+ }
+
+ TopExp_Explorer anExp(aResult, TopAbs_SOLID);
+ if(!anExp.More()) {
+ return;
+ }
+ if(aResult.ShapeType() == TopAbs_COMPOUND) {
+ aResult = GeomAlgoAPI_DFLoader::refineResult(aResult);
+ }
+ if(aResult.ShapeType() == TopAbs_COMPOUND) {
+ std::shared_ptr<GeomAPI_Shape> aCompound(new GeomAPI_Shape);
+ aCompound->setImpl(new TopoDS_Shape(aResult));
+ ListOfShape aCompSolids, aFreeSolids;
+ GeomAlgoAPI_ShapeTools::combineShapes(aCompound, GeomAPI_Shape::COMPSOLID, aCompSolids, aFreeSolids);
+ if(aCompSolids.size() == 1 && aFreeSolids.size() == 0) {
+ aResult = aCompSolids.front()->impl<TopoDS_Shape>();
+ } else if (aCompSolids.size() > 1 || (aCompSolids.size() >= 1 && aFreeSolids.size() >= 1)) {
+ TopoDS_Compound aResultComp;
+ TopoDS_Builder aBuilder;
+ aBuilder.MakeCompound(aResultComp);
+ for(ListOfShape::const_iterator anIter = aCompSolids.cbegin(); anIter != aCompSolids.cend(); anIter++) {
+ aBuilder.Add(aResultComp, (*anIter)->impl<TopoDS_Shape>());
+ }
+ for(ListOfShape::const_iterator anIter = aFreeSolids.cbegin(); anIter != aFreeSolids.cend(); anIter++) {
+ aBuilder.Add(aResultComp, (*anIter)->impl<TopoDS_Shape>());
+ }
+ aResult = aResultComp;
+ }
+ }
+
// If after cut we got more than one solids then take closest to the center of mass of the base face.
- aResult = findClosest(aResult, aBasisCentr);
+ aResult = findClosest(aResult, aBaseCentre);
// Setting naming.
for(TopExp_Explorer anExp(aResult, TopAbs_FACE); anExp.More (); anExp.Next ()) {
const TopoDS_Shape& aFaceOnResult = anExp.Current();
Handle(Geom_Surface) aFaceSurface = BRep_Tool::Surface(TopoDS::Face(aFaceOnResult));
Handle(Geom_Surface) aBoundingSurface = BRep_Tool::Surface(TopoDS::Face(aRotatedBoundingFace));
- Handle(Geom_Surface) aBasisSurface = BRep_Tool::Surface(TopoDS::Face(aRotatedBasisFace));
if(aFaceSurface == aBoundingSurface) {
- std::shared_ptr<GeomAPI_Shape> aPtr = isFromFaceSet ? myFirst : myLast;
- aPtr->setImpl(new TopoDS_Shape(aFaceOnResult));
- }
- if(aFaceSurface == aBasisSurface) {
- std::shared_ptr<GeomAPI_Shape> aPtr = isFromFaceSet ? myLast : myFirst;
- aPtr->setImpl(new TopoDS_Shape(aFaceOnResult));
+ std::shared_ptr<GeomAPI_Shape> aShape(new GeomAPI_Shape());
+ aShape->setImpl(new TopoDS_Shape(aFaceOnResult));
+ isFromFaceSet ? this->addFromFace(aShape) : this->addToFace(aShape);
}
}
}
- TopExp_Explorer anExp(aResult, TopAbs_SOLID);
- if(!anExp.More()) {
+ // Setting result.
+ if(aResult.IsNull()) {
return;
}
-
- // fill data map to keep correct orientation of sub-shapes
- myMap = std::make_shared<GeomAPI_DataMapOfShapeShape>();
- for (TopExp_Explorer Exp(aResult,TopAbs_FACE); Exp.More(); Exp.Next()) {
- std::shared_ptr<GeomAPI_Shape> aCurrentShape(new GeomAPI_Shape());
- aCurrentShape->setImpl(new TopoDS_Shape(Exp.Current()));
- myMap->bind(aCurrentShape, aCurrentShape);
- }
- myShape = std::make_shared<GeomAPI_Shape>();
- myShape->setImpl(new TopoDS_Shape(aResult));
- myMkShape = std::make_shared<GeomAlgoAPI_MakeShapeList>();
- myDone = true;
- return;
+ std::shared_ptr<GeomAPI_Shape> aShape(new GeomAPI_Shape());
+ aShape->setImpl(new TopoDS_Shape(aResult));
+ this->setShape(aShape);
+ this->setDone(true);
}
//=================================================================================================
-const bool GeomAlgoAPI_Revolution::isDone() const
+TopoDS_Face makeFaceFromPlane(gp_Pln& thePlane, const gp_Pnt& thePoint)
{
- return myDone;
-}
+ if(!thePlane.Contains(thePoint, Precision::Confusion())) {
+ gp_XYZ aVec = thePoint.XYZ() - thePlane.Location().XYZ();
+ double aSign = aVec * thePlane.Axis().Direction().XYZ();
+ if(aSign < 0) thePlane.SetAxis(thePlane.Axis().Reversed());
+ }
-//=================================================================================================
-const bool GeomAlgoAPI_Revolution::isValid() const
-{
- BRepCheck_Analyzer aChecker(myShape->impl<TopoDS_Shape>());
- return (aChecker.IsValid() == Standard_True);
+ BRepBuilderAPI_MakeFace aMakeFace(thePlane);
+ TopoDS_Face aResultFace = TopoDS::Face(aMakeFace.Shape());
+
+ return aResultFace;
}
//=================================================================================================
-const bool GeomAlgoAPI_Revolution::hasVolume() const
+TopoDS_Solid makeSolidFromShape(const TopoDS_Shape& theShape)
{
- bool hasVolume(false);
- if(isValid()) {
- const TopoDS_Shape& aRShape = myShape->impl<TopoDS_Shape>();
- GProp_GProps aGProp;
- BRepGProp::VolumeProperties(aRShape, aGProp);
- if(aGProp.Mass() > Precision::Confusion())
- hasVolume = true;
+ TopoDS_Shell aShell;
+ TopoDS_Solid aSolid;
+
+ BRep_Builder aBoundingBuilder;
+ if(theShape.ShapeType() == TopAbs_SHELL) {
+ aShell = TopoDS::Shell(theShape);
+ } else {
+ aBoundingBuilder.MakeShell(aShell);
+ aBoundingBuilder.Add(aShell, theShape);
}
- return hasVolume;
-}
+ aBoundingBuilder.MakeSolid(aSolid);
+ aBoundingBuilder.Add(aSolid, aShell);
-//=================================================================================================
-const std::shared_ptr<GeomAPI_Shape>& GeomAlgoAPI_Revolution::shape () const
-{
- return myShape;
+ return aSolid;
}
//=================================================================================================
-const std::shared_ptr<GeomAPI_Shape>& GeomAlgoAPI_Revolution::firstShape()
+TopoDS_Shape findClosest(const TopoDS_Shape& theShape, const gp_Pnt& thePoint)
{
- return myFirst;
-}
+ TopoDS_Shape aResult = theShape;
-//=================================================================================================
-const std::shared_ptr<GeomAPI_Shape>& GeomAlgoAPI_Revolution::lastShape()
-{
- return myLast;
-}
+ if(theShape.ShapeType() == TopAbs_COMPOUND) {
+ double aMinDistance = Precision::Infinite();
+ double aCurDistance;
+ GProp_GProps aGProps;
+ gp_Pnt aCentr;
-//=================================================================================================
-std::shared_ptr<GeomAPI_DataMapOfShapeShape> GeomAlgoAPI_Revolution::mapOfShapes() const
-{
- return myMap;
-}
+ for (TopoDS_Iterator anItr(theShape); anItr.More(); anItr.Next()) {
+ TopoDS_Shape aValue = anItr.Value();
+ BRepGProp::VolumeProperties(aValue, aGProps);
+ aCentr = aGProps.CentreOfMass();
+ aCurDistance = aCentr.Distance(thePoint);
-//=================================================================================================
-std::shared_ptr<GeomAlgoAPI_MakeShape> GeomAlgoAPI_Revolution::makeShape() const
-{
- return myMkShape;
+ if(aCurDistance < aMinDistance) {
+ aMinDistance = aCurDistance;
+ aResult = aValue;
+ }
+ }
+ }
+
+ return aResult;
}