#include <GeomAlgoAPI_Revolution.h>
+#include <GeomAPI_Face.h>
+#include <GeomAPI_ShapeExplorer.h>
#include <GeomAlgoAPI_DFLoader.h>
#include <GeomAlgoAPI_MakeShapeList.h>
#include <GeomAlgoAPI_Rotation.h>
-#include <GeomAlgoAPI_ShapeProps.h>
+#include <GeomAlgoAPI_ShapeTools.h>
#include <BRep_Builder.hxx>
#include <BRep_Tool.hxx>
#include <BRepAlgoAPI_Cut.hxx>
+#include <BRepBuilderAPI_MakeEdge.hxx>
#include <BRepBuilderAPI_MakeFace.hxx>
#include <BRepBuilderAPI_Transform.hxx>
+#include <BRepBuilderAPI_MakeWire.hxx>
#include <BRepCheck_Analyzer.hxx>
#include <BRepPrimAPI_MakeRevol.hxx>
#include <BRepGProp.hxx>
+#include <BRepOffsetAPI_MakePipe.hxx>
+#include <BRepTools.hxx>
+#include <Geom_Circle.hxx>
+#include <Geom_Line.hxx>
#include <Geom_Plane.hxx>
-#include <Geom_RectangularTrimmedSurface.hxx>
+#include <GeomAPI_ProjectPointOnCurve.hxx>
#include <GeomLib_IsPlanarSurface.hxx>
+#include <gp_Circ.hxx>
#include <gp_Pln.hxx>
#include <GProp_GProps.hxx>
#include <TopExp_Explorer.hxx>
#include <TopoDS.hxx>
+#include <TopTools_ListIteratorOfListOfShape.hxx>
+
+//=================================================================================================
+GeomAlgoAPI_Revolution::GeomAlgoAPI_Revolution(std::shared_ptr<GeomAPI_Shape> theBasis,
+ std::shared_ptr<GeomAPI_Ax1> theAxis,
+ double theToAngle,
+ double theFromAngle)
+: myDone(false)
+{
+ build(theBasis, theAxis, std::shared_ptr<GeomAPI_Shape>(), theToAngle, std::shared_ptr<GeomAPI_Shape>(), theFromAngle);
+}
//=================================================================================================
GeomAlgoAPI_Revolution::GeomAlgoAPI_Revolution(std::shared_ptr<GeomAPI_Shape> theBasis,
std::shared_ptr<GeomAPI_Ax1> theAxis,
- std::shared_ptr<GeomAPI_Shape> theFromShape,
- double theFromAngle,
std::shared_ptr<GeomAPI_Shape> theToShape,
- double theToAngle)
-: myAxis(theAxis),
- myFromShape(theFromShape),
- myFromAngle(theFromAngle),
- myToShape(theToShape),
- myToAngle(theToAngle),
- myDone(false),
- myShape(new GeomAPI_Shape()),
- myFirst(new GeomAPI_Shape()),myLast(new GeomAPI_Shape())
+ double theToAngle,
+ std::shared_ptr<GeomAPI_Shape> theFromShape,
+ double theFromAngle)
+: myDone(false)
{
- build(theBasis);
+ build(theBasis, theAxis, theToShape, theToAngle, theFromShape, theFromAngle);
}
//=================================================================================================
}
//=================================================================================================
-TopoDS_Solid GeomAlgoAPI_Revolution::makeSolidFromFace(const TopoDS_Face& theFace)
+TopoDS_Solid GeomAlgoAPI_Revolution::makeSolidFromShape(const TopoDS_Shape& theShape)
{
TopoDS_Shell aShell;
TopoDS_Solid aSolid;
BRep_Builder aBoundingBuilder;
- aBoundingBuilder.MakeShell(aShell);
- aBoundingBuilder.Add(aShell, theFace);
+ if(theShape.ShapeType() == TopAbs_SHELL) {
+ aShell = TopoDS::Shell(theShape);
+ } else {
+ aBoundingBuilder.MakeShell(aShell);
+ aBoundingBuilder.Add(aShell, theShape);
+ }
aBoundingBuilder.MakeSolid(aSolid);
aBoundingBuilder.Add(aSolid, aShell);
}
//=================================================================================================
-void GeomAlgoAPI_Revolution::build(const std::shared_ptr<GeomAPI_Shape>& theBasis)
+void GeomAlgoAPI_Revolution::build(const std::shared_ptr<GeomAPI_Shape>& theBasis,
+ const std::shared_ptr<GeomAPI_Ax1>& theAxis,
+ const std::shared_ptr<GeomAPI_Shape>& theToShape,
+ double theToAngle,
+ const std::shared_ptr<GeomAPI_Shape>& theFromShape,
+ double theFromAngle)
{
- if(!theBasis || !myAxis ||
- (((!myFromShape && !myToShape) || (myFromShape && myToShape && myFromShape->isEqual(myToShape)))
- && (myFromAngle == 0.0 && myToAngle == 0.0))) {
+ if(!theBasis || !theAxis ||
+ (((!theFromShape && !theToShape) || (theFromShape && theToShape && theFromShape->isEqual(theToShape)))
+ && (theFromAngle == -theToAngle))) {
return;
}
- TopoDS_Face aBasisFace = TopoDS::Face(theBasis->impl<TopoDS_Shape>());
- GeomLib_IsPlanarSurface isBasisPlanar(BRep_Tool::Surface(aBasisFace));
- if(!isBasisPlanar.IsPlanar()) {// non-planar shapes is not supported for revolution
+ // Checking that shell is planar.
+ TopoDS_Shape aBasis = theBasis->impl<TopoDS_Shape>();
+ // TODO: fix planar checking
+ //TopExp_Explorer aBasisExp(aBasis, TopAbs_FACE);
+ //for(; aBasisExp.More(); aBasisExp.Next()) {
+ // const TopoDS_Shape& aCurSh = aBasisExp.Current();
+ //}
+
+ // Geting base plane.
+ std::shared_ptr<GeomAPI_Face> aBaseFace;
+ if(theBasis->shapeType() == GeomAPI_Shape::FACE) {
+ aBaseFace = std::shared_ptr<GeomAPI_Face>(new GeomAPI_Face(theBasis));
+ } else if(theBasis->shapeType() == GeomAPI_Shape::SHELL) {
+ GeomAPI_ShapeExplorer anExp(theBasis, GeomAPI_Shape::FACE);
+ if(anExp.more()) {
+ std::shared_ptr<GeomAPI_Shape> aFaceOnShell = anExp.current();
+ aBaseFace = std::shared_ptr<GeomAPI_Face>(new GeomAPI_Face(aFaceOnShell));
+ }
+ }
+ if(!aBaseFace.get()) {
return;
}
+ TopoDS_Face aBasisFace = TopoDS::Face(aBaseFace->impl<TopoDS_Shape>());
+ GeomLib_IsPlanarSurface isBasisPlanar(BRep_Tool::Surface(aBasisFace));
gp_Pln aBasisPln = isBasisPlanar.Plan();
- gp_Ax1 anAxis = myAxis->impl<gp_Ax1>();
-
- ListOfMakeShape aListOfMakeShape;
+ Geom_Plane aBasisPlane(aBasisPln);
+ gp_Ax1 anAxis = theAxis->impl<gp_Ax1>();
+ if(aBasisPlane.Axis().Angle(anAxis) < Precision::Confusion()) {
+ return;
+ }
+ gp_Lin anAxisLin(anAxis);
+
+ // Creating circle for pipe.
+ gp_Pnt aBasisCentre = GeomAlgoAPI_ShapeTools::centreOfMass(theBasis)->impl<gp_Pnt>();
+ gp_Pnt aStartPnt = aBasisCentre;
+ const TopoDS_Shape& aBasisShape = theBasis->impl<TopoDS_Shape>();
+ Handle(Geom_Line) anAxisLine = new Geom_Line(anAxis);
+ if(anAxisLin.Contains(aStartPnt, Precision::Confusion())) {
+ aStartPnt.Translate(anAxis.Direction() ^ aBasisPln.Axis().Direction());
+ }
+ GeomAPI_ProjectPointOnCurve aProjection(aStartPnt, anAxisLine);
+ if(aProjection.NbPoints() != 1) {
+ return;
+ }
+ Standard_Real aRadius = aProjection.Distance(1);
+ gp_Circ aCircle(gp_Ax2(aProjection.NearestPoint(), anAxis.Direction()), aRadius);
TopoDS_Shape aResult;
- if(!myFromShape && !myToShape) { // Case 1: When only angles was set.
+ ListOfMakeShape aListOfMakeShape;
+ if(!theFromShape && !theToShape) { // Case 1: When only angles was set.
// Rotating base face with the negative value of "from angle".
gp_Trsf aBaseTrsf;
- aBaseTrsf.SetRotation(anAxis, -myFromAngle / 180.0 * M_PI);
- BRepBuilderAPI_Transform* aBaseTransform = new BRepBuilderAPI_Transform(aBasisFace,
+ aBaseTrsf.SetRotation(anAxis, -theFromAngle / 180.0 * M_PI);
+ BRepBuilderAPI_Transform* aBaseTransform = new BRepBuilderAPI_Transform(aBasisShape,
aBaseTrsf,
true);
+ if(!aBaseTransform || !aBaseTransform->IsDone()) {
+ return;
+ }
aListOfMakeShape.push_back(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aBaseTransform)));
TopoDS_Shape aRotatedBaseShape = aBaseTransform->Shape();
- // Making revolution to the angle equal to the sum of "from angle" and "to angle".
- double anAngle = myFromAngle + myToAngle;
- BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aRotatedBaseShape,
- anAxis,
- anAngle / 180 * M_PI,
- Standard_True);
- aRevolBuilder->Build();
- if(!aRevolBuilder->IsDone()) {
- return;
+ if(theBasis->shapeType() == GeomAPI_Shape::FACE) {
+ // Making revolution to the angle equal to the sum of "from angle" and "to angle".
+ double anAngle = theFromAngle + theToAngle;
+ BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aRotatedBaseShape,
+ anAxis,
+ anAngle / 180 * M_PI,
+ Standard_True);
+ aRevolBuilder->Build();
+ if(!aRevolBuilder->IsDone()) {
+ return;
+ }
+ aListOfMakeShape.push_back(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aRevolBuilder)));
+ aResult = aRevolBuilder->Shape();
+
+ // Setting naming.
+ std::shared_ptr<GeomAPI_Shape> aFSHape(new GeomAPI_Shape);
+ aFSHape->setImpl(new TopoDS_Shape(aRevolBuilder->FirstShape()));
+ myFromFaces.push_back(aFSHape);
+ std::shared_ptr<GeomAPI_Shape> aTSHape(new GeomAPI_Shape);
+ aTSHape->setImpl(new TopoDS_Shape(aRevolBuilder->LastShape()));
+ myToFaces.push_back(aTSHape);
+ } else {
+ gp_Pnt aFromPnt = aStartPnt.Transformed(aBaseTrsf);
+ aCircle = gp_Circ(gp_Ax2(aProjection.NearestPoint(), anAxis.Direction(), gp_Vec(aProjection.NearestPoint(), aFromPnt)),
+ aRadius);
+
+ // Making wire for pipe.
+ TopoDS_Edge aPipeEdge = BRepBuilderAPI_MakeEdge(aCircle, 0, (theFromAngle + theToAngle) / 180.0 * M_PI);
+ TopoDS_Wire aPipeWire = BRepBuilderAPI_MakeWire(aPipeEdge).Wire();
+
+ // Making pipe.
+ BRepOffsetAPI_MakePipe* aPipeBuilder = new BRepOffsetAPI_MakePipe(aPipeWire, aRotatedBaseShape);
+ if(!aPipeBuilder || !aPipeBuilder->IsDone()) {
+ return;
+ }
+ std::shared_ptr<GeomAPI_Shape> aWire(new GeomAPI_Shape);
+ std::shared_ptr<GeomAPI_Shape> aBShape(new GeomAPI_Shape);
+ aWire->setImpl(new TopoDS_Shape(aPipeWire));
+ aBShape->setImpl(new TopoDS_Shape(aRotatedBaseShape));
+ aListOfMakeShape.push_back(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aPipeBuilder, aWire, aBShape)));
+ aResult = aPipeBuilder->Shape();
+ TopoDS_Shape aToShape = aPipeBuilder->LastShape();
+ TopoDS_Shape aFromShape = aPipeBuilder->FirstShape();
+
+ // Setting naming.
+ TopExp_Explorer anExp(aToShape, TopAbs_FACE);
+ for(; anExp.More(); anExp.Next()) {
+ std::shared_ptr<GeomAPI_Shape> aTSHape(new GeomAPI_Shape);
+ aTSHape->setImpl(new TopoDS_Shape(anExp.Current()));
+ myToFaces.push_back(aTSHape);
+ }
+ anExp.Init(aFromShape, TopAbs_FACE);
+ for(; anExp.More(); anExp.Next()) {
+ std::shared_ptr<GeomAPI_Shape> aFSHape(new GeomAPI_Shape);
+ aFSHape->setImpl(new TopoDS_Shape(anExp.Current()));
+ myFromFaces.push_back(aFSHape);
+ }
}
- aListOfMakeShape.push_back(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aRevolBuilder)));
- aResult = aRevolBuilder->Shape();
-
- // Setting naming.
- myFirst->setImpl(new TopoDS_Shape(aRevolBuilder->FirstShape()));
- myLast->setImpl(new TopoDS_Shape(aRevolBuilder->LastShape()));
- } else if(myFromShape && myToShape) { // Case 2: When both bounding planes were set.
+ } else if(theFromShape && theToShape) { // Case 2: When both bounding planes were set.
// Getting bounding faces.
- TopoDS_Face aFromFace = TopoDS::Face(myFromShape->impl<TopoDS_Shape>());
- TopoDS_Face aToFace = TopoDS::Face(myToShape->impl<TopoDS_Shape>());
+ TopoDS_Face aFromFace = TopoDS::Face(theFromShape->impl<TopoDS_Shape>());
+ TopoDS_Face aToFace = TopoDS::Face(theToShape->impl<TopoDS_Shape>());
// Getting planes from bounding face.
GeomLib_IsPlanarSurface isFromPlanar(BRep_Tool::Surface(aFromFace));
// Orienting bounding planes properly so that the center of mass of the base face stays
// on the result shape after cut.
- gp_Pnt aBasisCentr = GeomAlgoAPI_ShapeProps::centreOfMass(theBasis)->impl<gp_Pnt>();
- aFromFace = makeFaceFromPlane(aFromPln, aBasisCentr);
- aToFace = makeFaceFromPlane(aToPln, aBasisCentr);
+ aFromFace = makeFaceFromPlane(aFromPln, aBasisCentre);
+ aToFace = makeFaceFromPlane(aToPln, aBasisCentre);
// Making solids from bounding planes and putting them in compound.
- TopoDS_Shape aFromSolid = makeSolidFromFace(aFromFace);
- TopoDS_Shape aToSolid = makeSolidFromFace(aToFace);
+ TopoDS_Shape aFromSolid = makeSolidFromShape(aFromFace);
+ TopoDS_Shape aToSolid = makeSolidFromShape(aToFace);
// Rotating bounding planes to the specified angle.
gp_Trsf aFromTrsf;
gp_Trsf aToTrsf;
- double aFromRotAngle = ((aFromPln.Axis().Direction() * aBasisPln.Axis().Direction()) > 0) ? -myFromAngle : myFromAngle;
- double aToRotAngle = ((aToPln.Axis().Direction() * aBasisPln.Axis().Direction()) > 0) ? -myToAngle : myToAngle;
+ double aFromRotAngle = ((aFromPln.Axis().Direction() * aBasisPln.Axis().Direction()) > 0) ? -theFromAngle : theFromAngle;
+ double aToRotAngle = ((aToPln.Axis().Direction() * aBasisPln.Axis().Direction()) > 0) ? -theToAngle : theToAngle;
aFromTrsf.SetRotation(anAxis,aFromRotAngle / 180.0 * M_PI);
aToTrsf.SetRotation(anAxis, aToRotAngle / 180.0 * M_PI);
BRepBuilderAPI_Transform aFromTransform(aFromSolid, aFromTrsf, true);
aToSolid = aToTransform.Shape();
// Making revolution to the 360 angle.
- BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aBasisFace, anAxis, 2 * M_PI, Standard_True);
- aRevolBuilder->Build();
- aListOfMakeShape.push_back(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aRevolBuilder)));
- TopoDS_Shape aRevolShape = aRevolBuilder->Shape();
+ if(theBasis->shapeType() == GeomAPI_Shape::FACE) {
+ BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aBasisShape, anAxis, 2 * M_PI, Standard_True);
+ aRevolBuilder->Build();
+ aListOfMakeShape.push_back(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aRevolBuilder)));
+ aResult = aRevolBuilder->Shape();
+ } else {
+ // Making wire for pipe.
+ TopoDS_Edge aPipeEdge = BRepBuilderAPI_MakeEdge(aCircle, 0, 2 * M_PI);
+ TopoDS_Wire aPipeWire = BRepBuilderAPI_MakeWire(aPipeEdge).Wire();
+
+ // Making pipe.
+ BRepOffsetAPI_MakePipe* aPipeBuilder = new BRepOffsetAPI_MakePipe(aPipeWire, aBasisShape);
+ if(!aPipeBuilder || !aPipeBuilder->IsDone()) {
+ return;
+ }
+ std::shared_ptr<GeomAPI_Shape> aWire(new GeomAPI_Shape);
+ std::shared_ptr<GeomAPI_Shape> aBShape(new GeomAPI_Shape);
+ aWire->setImpl(new TopoDS_Shape(aPipeWire));
+ aBShape->setImpl(new TopoDS_Shape(aBasisShape));
+ aListOfMakeShape.push_back(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aPipeBuilder, aWire, aBShape)));
+ aResult = aPipeBuilder->Shape();
+ }
// Cutting revolution with from plane.
- BRepAlgoAPI_Cut* aFromCutBuilder = new BRepAlgoAPI_Cut(aRevolShape, aFromSolid);
+ BRepAlgoAPI_Cut* aFromCutBuilder = new BRepAlgoAPI_Cut(aResult, aFromSolid);
aFromCutBuilder->Build();
if(!aFromCutBuilder->IsDone()) {
return;
aResult = aToCutBuilder->Shape();
// If after cut we got more than one solids then take closest to the center of mass of the base face.
- aResult = findClosest(aResult, aBasisCentr);
+ aResult = findClosest(aResult, aBasisCentre);
// Setting naming.
for(TopExp_Explorer anExp(aResult, TopAbs_FACE); anExp.More (); anExp.Next ()) {
Handle(Geom_Surface) aFromSurface = BRep_Tool::Surface(TopoDS::Face(aRotatedFromFace));
Handle(Geom_Surface) aToSurface = BRep_Tool::Surface(TopoDS::Face(aRotatedToFace));
if(aFaceSurface == aFromSurface) {
- myFirst->setImpl(new TopoDS_Shape(aFaceOnResult));
+ std::shared_ptr<GeomAPI_Shape> aFSHape(new GeomAPI_Shape);
+ aFSHape->setImpl(new TopoDS_Shape(aFaceOnResult));
+ myFromFaces.push_back(aFSHape);
}
if(aFaceSurface == aToSurface) {
- myLast->setImpl(new TopoDS_Shape(aFaceOnResult));
+ std::shared_ptr<GeomAPI_Shape> aTSHape(new GeomAPI_Shape);
+ aTSHape->setImpl(new TopoDS_Shape(aFaceOnResult));
+ myToFaces.push_back(aTSHape);
}
}
} else { //Case 3: When only one bounding plane was set.
// Getting bounding face.
TopoDS_Face aBoundingFace;
bool isFromFaceSet = false;
- if(myFromShape) {
- aBoundingFace = TopoDS::Face(myFromShape->impl<TopoDS_Shape>());
+ if(theFromShape) {
+ aBoundingFace = TopoDS::Face(theFromShape->impl<TopoDS_Shape>());
isFromFaceSet = true;
- } else if(myToShape) {
- aBoundingFace = TopoDS::Face(myToShape->impl<TopoDS_Shape>());
+ } else if(theToShape) {
+ aBoundingFace = TopoDS::Face(theToShape->impl<TopoDS_Shape>());
}
// Getting plane from bounding face.
// Orienting bounding plane properly so that the center of mass of the base face stays
// on the result shape after cut.
- gp_Pnt aBasisCentr = GeomAlgoAPI_ShapeProps::centreOfMass(theBasis)->impl<gp_Pnt>();
+ gp_Pnt aBasisCentr = GeomAlgoAPI_ShapeTools::centreOfMass(theBasis)->impl<gp_Pnt>();
aBoundingFace = makeFaceFromPlane(aBoundingPln, aBasisCentr);
// Making solid from bounding plane.
- TopoDS_Shape aBoundingSolid = makeSolidFromFace(aBoundingFace);
+ TopoDS_Shape aBoundingSolid = makeSolidFromShape(aBoundingFace);
// Rotating bounding plane to the specified angle.
- double aBoundingRotAngle = isFromFaceSet ? myFromAngle : myToAngle;
+ double aBoundingRotAngle = isFromFaceSet ? theFromAngle : theToAngle;
if(aBoundingPln.Axis().IsParallel(aBasisPln.Axis(), Precision::Confusion())) {
if(isFromFaceSet) aBoundingRotAngle = -aBoundingRotAngle;
} else {
aBoundingSolid = aBoundingTransform.Shape();
// Making revolution to the 360 angle.
- BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aBasisFace, anAxis, 2 * M_PI, Standard_True);
- aRevolBuilder->Build();
- aListOfMakeShape.push_back(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aRevolBuilder)));
- TopoDS_Shape aRevolShape = aRevolBuilder->Shape();
+ if(theBasis->shapeType() == GeomAPI_Shape::FACE) {
+ BRepPrimAPI_MakeRevol* aRevolBuilder = new BRepPrimAPI_MakeRevol(aBasisShape, anAxis, 2 * M_PI, Standard_True);
+ aRevolBuilder->Build();
+ aListOfMakeShape.push_back(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aRevolBuilder)));
+ aResult = aRevolBuilder->Shape();
+ } else {
+ // Making wire for pipe.
+ TopoDS_Edge aPipeEdge = BRepBuilderAPI_MakeEdge(aCircle, 0, 2 * M_PI);
+ TopoDS_Wire aPipeWire = BRepBuilderAPI_MakeWire(aPipeEdge).Wire();
+
+ // Making pipe.
+ BRepOffsetAPI_MakePipe* aPipeBuilder = new BRepOffsetAPI_MakePipe(aPipeWire, aBasisShape);
+ if(!aPipeBuilder || !aPipeBuilder->IsDone()) {
+ return;
+ }
+ std::shared_ptr<GeomAPI_Shape> aWire(new GeomAPI_Shape);
+ std::shared_ptr<GeomAPI_Shape> aBShape(new GeomAPI_Shape);
+ aWire->setImpl(new TopoDS_Shape(aPipeWire));
+ aBShape->setImpl(new TopoDS_Shape(aBasisShape));
+ aListOfMakeShape.push_back(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aPipeBuilder, aWire, aBShape)));
+ aResult = aPipeBuilder->Shape();
+ }
// Cutting revolution with bounding plane.
- BRepAlgoAPI_Cut* aBoundingCutBuilder = new BRepAlgoAPI_Cut(aRevolShape, aBoundingSolid);
+ BRepAlgoAPI_Cut* aBoundingCutBuilder = new BRepAlgoAPI_Cut(aResult, aBoundingSolid);
aBoundingCutBuilder->Build();
if(!aBoundingCutBuilder->IsDone()) {
return;
}
aListOfMakeShape.push_back(std::shared_ptr<GeomAlgoAPI_MakeShape>(new GeomAlgoAPI_MakeShape(aBoundingCutBuilder)));
aResult = aBoundingCutBuilder->Shape();
- TopExp_Explorer anExp1(aResult, TopAbs_SOLID);
// Setting naming.
- if(aBoundingCutBuilder->Modified(aBoundingFace).Extent() > 0) {
- std::shared_ptr<GeomAPI_Shape> aPtr = isFromFaceSet ? myFirst : myLast;
- aPtr->setImpl(new TopoDS_Shape(aBoundingCutBuilder->Modified(aBoundingFace).First()));
+ const TopTools_ListOfShape& aBndShapes = aBoundingCutBuilder->Modified(aBoundingFace);
+ for(TopTools_ListIteratorOfListOfShape anIt(aBndShapes); anIt.More(); anIt.Next()) {
+ std::shared_ptr<GeomAPI_Shape> aShape(new GeomAPI_Shape());
+ aShape->setImpl(new TopoDS_Shape(anIt.Value()));
+ isFromFaceSet ? myFromFaces.push_back(aShape) : myToFaces.push_back(aShape);
}
// Try to cut with base face. If it can not be done then keep result of cut with bounding plane.
if(isFromFaceSet) {
- aBasisFace.Orientation(TopAbs_REVERSED);
+ gp_Trsf aMirrorTrsf;
+ aMirrorTrsf.SetMirror(aBasisPlane.Position().Ax2());
+ BRepBuilderAPI_Transform aMirrorTransform(aBasis, aMirrorTrsf, true);
+ aBasis = aMirrorTransform.Shape();
}
// Making solid from basis face.
- TopoDS_Shape aBasisSolid = makeSolidFromFace(aBasisFace);
+ TopoDS_Shape aBasisSolid = makeSolidFromShape(aBasis);
// Rotating basis face to the specified angle.
gp_Trsf aBasisTrsf;
- double aBasisRotAngle = isFromFaceSet ? myToAngle : -myFromAngle;
+ double aBasisRotAngle = isFromFaceSet ? theToAngle : -theFromAngle;
aBasisTrsf.SetRotation(anAxis, aBasisRotAngle / 180.0 * M_PI);
BRepBuilderAPI_Transform aBasisTransform(aBasisSolid, aBasisTrsf, true);
- TopoDS_Shape aRotatedBasisFace = aBasisTransform.Modified(aBasisFace).First();
+ TopoDS_Shape aRotatedBasis = aBasisTransform.Modified(aBasis).First();
aBasisSolid = aBasisTransform.Shape();
- // Cutting revolution with basis face.
+ // Cutting revolution with basis.
BRepAlgoAPI_Cut* aBasisCutBuilder = new BRepAlgoAPI_Cut(aResult, aBasisSolid);
aBasisCutBuilder->Build();
if(aBasisCutBuilder->IsDone()) {
}
}
+ const TopTools_ListOfShape& aBsShapes = aBasisCutBuilder->Modified(aBoundingFace);
+ for(TopTools_ListIteratorOfListOfShape anIt(aBsShapes); anIt.More(); anIt.Next()) {
+ std::shared_ptr<GeomAPI_Shape> aShape(new GeomAPI_Shape());
+ aShape->setImpl(new TopoDS_Shape(anIt.Value()));
+ isFromFaceSet ? myToFaces.push_back(aShape) : myFromFaces.push_back(aShape);
+ }
+
// If after cut we got more than one solids then take closest to the center of mass of the base face.
aResult = findClosest(aResult, aBasisCentr);
const TopoDS_Shape& aFaceOnResult = anExp.Current();
Handle(Geom_Surface) aFaceSurface = BRep_Tool::Surface(TopoDS::Face(aFaceOnResult));
Handle(Geom_Surface) aBoundingSurface = BRep_Tool::Surface(TopoDS::Face(aRotatedBoundingFace));
- Handle(Geom_Surface) aBasisSurface = BRep_Tool::Surface(TopoDS::Face(aRotatedBasisFace));
if(aFaceSurface == aBoundingSurface) {
- std::shared_ptr<GeomAPI_Shape> aPtr = isFromFaceSet ? myFirst : myLast;
- aPtr->setImpl(new TopoDS_Shape(aFaceOnResult));
- }
- if(aFaceSurface == aBasisSurface) {
- std::shared_ptr<GeomAPI_Shape> aPtr = isFromFaceSet ? myLast : myFirst;
- aPtr->setImpl(new TopoDS_Shape(aFaceOnResult));
+ std::shared_ptr<GeomAPI_Shape> aShape(new GeomAPI_Shape());
+ aShape->setImpl(new TopoDS_Shape(aFaceOnResult));
+ isFromFaceSet ? myFromFaces.push_back(aShape) : myToFaces.push_back(aShape);
}
}
}
if(!anExp.More()) {
return;
}
+ if(aResult.ShapeType() == TopAbs_COMPOUND) {
+ aResult = GeomAlgoAPI_DFLoader::refineResult(aResult);
+ }
+ if(aResult.ShapeType() == TopAbs_COMPOUND) {
+ std::shared_ptr<GeomAPI_Shape> aCompound(new GeomAPI_Shape);
+ aCompound->setImpl(new TopoDS_Shape(aResult));
+ ListOfShape aCompSolids, aFreeSolids;
+ GeomAlgoAPI_ShapeTools::combineShapes(aCompound, GeomAPI_Shape::COMPSOLID, aCompSolids, aFreeSolids);
+ if(aCompSolids.size() == 1 && aFreeSolids.size() == 0) {
+ aResult = aCompSolids.front()->impl<TopoDS_Shape>();
+ } else if (aCompSolids.size() > 1 || (aCompSolids.size() >= 1 && aFreeSolids.size() >= 1)) {
+ TopoDS_Compound aResultComp;
+ TopoDS_Builder aBuilder;
+ aBuilder.MakeCompound(aResultComp);
+ for(ListOfShape::const_iterator anIter = aCompSolids.cbegin(); anIter != aCompSolids.cend(); anIter++) {
+ aBuilder.Add(aResultComp, (*anIter)->impl<TopoDS_Shape>());
+ }
+ for(ListOfShape::const_iterator anIter = aFreeSolids.cbegin(); anIter != aFreeSolids.cend(); anIter++) {
+ aBuilder.Add(aResultComp, (*anIter)->impl<TopoDS_Shape>());
+ }
+ aResult = aResultComp;
+ }
+ }
// fill data map to keep correct orientation of sub-shapes
+ myMap = std::shared_ptr<GeomAPI_DataMapOfShapeShape>(new GeomAPI_DataMapOfShapeShape());
for (TopExp_Explorer Exp(aResult,TopAbs_FACE); Exp.More(); Exp.Next()) {
std::shared_ptr<GeomAPI_Shape> aCurrentShape(new GeomAPI_Shape());
aCurrentShape->setImpl(new TopoDS_Shape(Exp.Current()));
- myMap.bind(aCurrentShape, aCurrentShape);
+ myMap->bind(aCurrentShape, aCurrentShape);
}
+ myShape = std::shared_ptr<GeomAPI_Shape>(new GeomAPI_Shape());
myShape->setImpl(new TopoDS_Shape(aResult));
- myMkShape = new GeomAlgoAPI_MakeShapeList(aListOfMakeShape);
+ myMkShape = std::shared_ptr<GeomAlgoAPI_MakeShapeList>(new GeomAlgoAPI_MakeShapeList(aListOfMakeShape));
myDone = true;
- return;
}
//=================================================================================================
}
//=================================================================================================
-const std::shared_ptr<GeomAPI_Shape>& GeomAlgoAPI_Revolution::firstShape()
+const ListOfShape& GeomAlgoAPI_Revolution::fromFaces() const
{
- return myFirst;
+ return myFromFaces;
}
//=================================================================================================
-const std::shared_ptr<GeomAPI_Shape>& GeomAlgoAPI_Revolution::lastShape()
+const ListOfShape& GeomAlgoAPI_Revolution::toFaces() const
{
- return myLast;
+ return myToFaces;
}
//=================================================================================================
-void GeomAlgoAPI_Revolution::mapOfShapes (GeomAPI_DataMapOfShapeShape& theMap) const
+std::shared_ptr<GeomAPI_DataMapOfShapeShape> GeomAlgoAPI_Revolution::mapOfShapes() const
{
- theMap = myMap;
+ return myMap;
}
//=================================================================================================
-GeomAlgoAPI_MakeShape* GeomAlgoAPI_Revolution::makeShape() const
+std::shared_ptr<GeomAlgoAPI_MakeShape> GeomAlgoAPI_Revolution::makeShape() const
{
return myMkShape;
}
-
-//=================================================================================================
-GeomAlgoAPI_Revolution::~GeomAlgoAPI_Revolution()
-{
- if (myImpl) {
- myMap.clear();
- }
-}