# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
#
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
"""
\namespace geompy
- \brief 3D Sketcher interface
+ \brief 2D and 3D Sketcher interfaces
"""
# This method is used by 3D Sketcher functionality
sk = geompy.Sketcher3D()
sk.addPointsAbsolute(0,0,0, 70,0,0)
sk.addPointsRelative(0, 0, 130)
- sk.addPointAnglesLength("OXY", 50, 0, 100)
- sk.addPointAnglesLength("OXZ", 30, 80, 130)
+ sk.addPointRadiusAnglesRelative(50, 0, 100, 'OXY')
+ sk.addPointRadiusAnglesRelative(30, 80, 130, 'OXZ')
sk.close()
a3D_Sketcher_1 = sk.wire()
"""
# Coordinates are considered as absolute.
# If the first point of sketcher is not yet defined, the first point
# from the listCoords will become the first sketcher point.
- # @param X1, Y1, Z1, X2, Y2, Z2, ... Coordinates of points
+ # @param listCoords X1, Y1, Z1, X2, Y2, Z2, ... Coordinates of points
def addPointsAbsolute (self, *listCoords):
"""
Add one or more points, sequentially connected with straight segments.
# Coordinates are considered relative to the previous point.
# If the first point of sketcher is not yet defined, the
# origin (0, 0, 0) will become the first sketcher point.
- # @param X1, Y1, Z1, X2, Y2, Z2, ... Coordinates of points
+ # @param listCoords X1, Y1, Z1, X2, Y2, Z2, ... Coordinates of points
def addPointsRelative (self, *listCoords):
"""
Add one or more points, sequentially connected with straight segments.
# @param axes can be: "OXY", "OYZ" or "OXZ"
# @param angle angle in a plane, defined by the \a axes
# @param height height from the plane, defined by the \a axes
- # @param radius distance to the coordinate system origin
+ # @param length distance to the coordinate system origin
def addPointRadiusAngleHRelative (self, length, angle, height, axes="OXY"):
"""
Add one straight segment, defined by two angles and length.
sk.addPointsRelative(0,0,130, 70,0,-130)
a3D_Sketcher_1 = sk.wire()
"""
- from geompyDC import ParseSketcherCommand, RaiseIfFailed
+ from salome.geom.geomBuilder import ParseSketcherCommand, RaiseIfFailed
Command,Parameters = ParseSketcherCommand(self.myCommand)
wire = self.geompyD.CurvesOp.Make3DSketcherCommand(Command)
self.myCommand = "3DSketcher"
wire.SetParameters(Parameters)
self.geompyD._autoPublish(wire, theName, "wire")
return wire
+
+# An interface to build a 2D Sketcher step-by-step.
+# Use geompy.Sketcher2D() method to obtain an instance of this class.
+
+class Sketcher2D:
+ """
+ 2D sketcher interface.
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addPoint(20, 20)
+ sk.addSegmentRelative(15, 70)
+ sk.addSegmentPerpY(50)
+ sk.addArcRadiusRelative(25, 15, 14.5, 0)
+ sk.addArcCenterAbsolute(1, 1, 50, 50, 0, 0)
+ sk.addArcDirectionRadiusLength(20, 20, 101, 162.13)
+ sk.close()
+ Sketch_1 = sk.wire(geomObj_1)
+ """
+ def __init__(self, geompyD):
+ self.geompyD = geompyD
+ self.myCommand = "Sketcher"
+ self.closed = False
+ pass
+
+ ## Add one point.
+ # Used to set the starting point
+ #
+ # @param x, y - Coordinates of point
+ def addPoint (self, x, y):
+ """
+ Add one point.
+ Used to set the starting point
+
+ Parameters:
+ x, y - Coordinates of point
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addPoint(20, 20)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":F %s %s" % (printVar(x), printVar(y))
+ pass
+
+ ## Add angle.
+ # Used to set the angle for further building
+ #
+ # @param angle - angle in a plane
+ def addAngle (self, angle):
+ """
+ Add angle.
+ Used to set the angle for further building
+
+ Parameters:
+ angle - angle in a plane
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addAngle(70)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":RR %s" % (printVar(angle))
+ pass
+
+ # Commands for creation of segment
+
+ ## Add segment, which sequentially connects the previous point
+ # with a point lying on a line parallel to the axis Ox and the value x = param x.
+ # The current point will be the previous value to the coordinate y and
+ # new value to the coordinate x.
+ # Coordinate is considered relative to the previous point.
+ #
+ # @param x - Coordinate of point on axis Ox
+ def addSegmentParalX(self, x):
+ """
+ Add segment, which sequentially connects the previous point
+ with a point lying on a line parallel to the axis Ox and the value x = param x.
+ The current point will be the previous value to the coordinate y and
+ new value to the coordinate x.
+ Coordinate is considered relative to the previous point.
+
+ Parameters:
+ x - Coordinate of point on axis Ox
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentParalX(40)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":X %s" % (printVar(x))
+ pass
+
+ ## Add segment, which sequentially connects the previous point
+ # with a point lying on a line parallel to the axis Ox and the value x = 0
+ # The current point will be the previous value to the coordinate y.
+ def addSegmentParalXToZero(self):
+ """
+ Add segment, which sequentially connects the previous point
+ with a point lying on a line parallel to the axis Ox and the value x = 0
+ The current point will be the previous value to the coordinate y.
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentParalXToZero()
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":XX"
+ pass
+
+ ## Add segment, which sequentially connects the previous point
+ # with a point lying on a line parallel to the axis Oy and the value y = param y.
+ # The current point will be the previous value to the coordinate x and
+ # new value to the coordinate y.
+ # Coordinate is considered relative to the previous point.
+ #
+ # @param y - Coordinate of point on axis Oy
+ def addSegmentParalY(self, y):
+ """
+ Add segment, which sequentially connects the previous point
+ with a point lying on a line parallel to the axis Oy and the value y = param y.
+ The current point will be the previous value to the coordinate x and
+ new value to the coordinate y.
+ Coordinate is considered relative to the previous point.
+
+ Parameters:
+ y - Coordinate of point on axis Oy
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentParalY(80)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":Y %s" % (printVar(y))
+ pass
+
+ ## Add segment, which sequentially connects the previous point
+ # with a point lying on a line parallel to the axis Ox and the value x = 0
+ # The current point will be the previous value to the coordinate y.
+ def addSegmentParalYToZero(self):
+ """
+ Add segment, which sequentially connects the previous point
+ with a point lying on a line parallel to the axis Oy and the value y = 0
+ The current point will be the previous value to the coordinate x.
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentParalYToZero()
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":YY"
+ pass
+
+ ## Add segment, which sequentially connects the given point with previous point
+ #
+ # Coordinates are considered as absolute.
+ # @param x, y - Coordinates of point
+ def addSegmentAbsolute (self, x, y):
+ """
+ Add segment, which sequentially connects the starting point with the given point
+ Coordinates are considered as absolute.
+
+ Parameters:
+ x, y - Coordinates of point
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentAbsolute(30, 50)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":TT %s %s" % (printVar(x), printVar(y))
+ pass
+
+ ## Add segment, which sequentially connects the given point with previous point
+ # Coordinates are considered relative to the previous point.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ #
+ # @param dx, dy - Coordinates of point relative a previous point
+ def addSegmentRelative (self, dx, dy):
+ """
+ Add segment, which sequentially connects the given point with previous point
+ Coordinates are considered relative to the previous point.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+
+ Parameters:
+ dx, dy - Coordinates of point relative a previous point
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentRelative(60, 10)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":T %s %s" % (printVar(dx), printVar(dy))
+ pass
+
+ ## Add one straight segment, defined by angle and length.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The angle and length coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param angle - angle in a plane
+ # @param length - length of the segment
+ def addSegmentAngleLength (self, angle, length ):
+ """
+ Add one straight segment, defined by angle and length.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The radius and angles coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ angle - angle in a plane
+ length - length of the segment
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentAngleLength(10, 30)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":R %s:L %s" % (printVar(angle), printVar(length))
+ pass
+
+ ## Add one straight segment, defined by angle and intersect straight x= param x.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The angle and point's coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param angle - angle in a plane
+ # @param x - value on the axis Ox
+ def addSegmentAngleX (self, angle, x ):
+ """
+ Add one straight segment, defined by angle and intersect straight x= param x.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The angle and point's coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ angle - angle in a plane
+ x - value on the axis Ox
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentAngleX(25, 90)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":R %s:IX %s" % (printVar(angle), printVar(x))
+ pass
+
+ ## Add one straight segment, defined by angle and intersect straight y= param y.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The angle and point's coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param angle - angle in a plane
+ # @param y - value on the axis Oy
+ def addSegmentAngleY (self, angle, y ):
+ """
+ Add one straight segment, defined by angle and intersect straight y= param y.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The angle and point's coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ angle - angle in a plane
+ y - value on the axis Oy
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentAngleY(40, 0)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":R %s:IY %s" % (printVar(angle), printVar(y))
+ pass
+
+
+ ## Add one straight segment, defined by perpendicular(angle=90) and length.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The length coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param length - length of the segment
+ def addSegmentPerpLength (self, length ):
+ """
+ Add one straight segment, defined by perpendicular and length.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The length coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ length - length of the segment
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentPerpLength(100)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":R 90:L %s" % (printVar(length))
+ pass
+
+ ## Add one straight segment, defined by perpendicular(angle=90) and intersect straight x= param x.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The point's coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param x - value on the axis Ox
+ def addSegmentPerpX (self, x ):
+ """
+ Add one straight segment, defined by perpendicular(angle=90) and intersect straight x= param x.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The point's coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ x - value on the axis Ox
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentPerpX(30)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":R 90:IX %s" % (printVar(x))
+ pass
+
+ ## Add one straight segment, defined by perpendicular(angle=90) and intersect straight y= param y.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The point's coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param y - value on the axis Oy
+ def addSegmentPerpY (self, y ):
+ """
+ Add one straight segment, defined by perpendicular(angle=90) and intersect straight y= param y.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The point's coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ y - value on the axis Oy
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentPerpY(10)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":R 90:IY %s" % (printVar(y))
+ pass
+
+
+ ## Add one straight segment, defined by previous direction and length.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The length coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param length - length of the segment
+ def addSegmentLength (self, length ):
+ """
+ Add one straight segment, defined by previous direction and length.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The length coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ length - length of the segment
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentLength(100)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":L %s" % (printVar(length))
+ pass
+
+ ## Add one straight segment, defined by previous direction and intersect straight x= param x.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The point's coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param x - value on the axis Ox
+ def addSegmentX (self, x ):
+ """
+ Add one straight segment, defined by previous direction and intersect straight x= param x.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The point's coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ x - value on the axis Ox
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentX(30)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":IX %s" % (printVar(x))
+ pass
+
+ ## Add one straight segment, defined by previous direction and intersect straight y= param y.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The point's coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param y - value on the axis Oy
+ def addSegmentY (self, y ):
+ """
+ Add one straight segment, defined by previous direction and intersect straight y= param y.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The point's coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ y - value on the axis Oy
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentY(10)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":IY %s" % (printVar(y))
+ pass
+
+
+ ## Add one straight segment, defined by direction and length.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The direction and length coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param dx, dy - direction of the segment
+ # @param length - length of the segment
+ def addSegmentDirectionLength (self, dx, dy, length ):
+ """
+ Add one straight segment, defined by direction and length.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The direction and length coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ dx, dy - direction of the segment
+ length - length of the segment
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentDirectionLength(20, 40, 30)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":D %s %s:L %s" % (printVar(dx), printVar(dy), printVar(length))
+ pass
+
+ ## Add one straight segment, defined by direction and intersect straight x= param x.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The direction and point's coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param dx, dy - direction of the segment
+ # @param x - value on the axis Ox
+ def addSegmentDirectionX (self, dx, dy, x ):
+ """
+ Add one straight segment, defined by direction and intersect straight x= param x.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The direction and point's coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ dx, dy - direction of the segment
+ x - value on the axis Ox
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentDirectionX(10, -40, 20)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":D %s %s:IX %s" % (printVar(dx), printVar(dy), printVar(x))
+ pass
+
+ ## Add one straight segment, defined by direction and intersect straight y= param y.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ # The direction and point's coordinates are defined
+ # in a local coordinate system which origin is the last point of the sketch
+ #
+ # @param dx, dy - direction of the segment
+ # @param y - value on the axis Oy
+ def addSegmentDirectionY (self, dx, dy, y ):
+ """
+ Add one straight segment, defined by direction and intersect straight y= param y.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+ The direction and point's coordinates are defined
+ in a local coordinate system which origin is the last point of the sketch
+
+ Parameters:
+ dx, dy - direction of the segment
+ y - value on the axis Oy
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addSegmentDirectionY(-10, -50, 20)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":D %s %s:IY %s" % (printVar(dx), printVar(dy), printVar(y))
+ pass
+
+ # Commands for creation of arc
+
+ ## Add arc, which connects the given point with previous point
+ # Coordinates are considered as absolute.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ #
+ # @param x, y - Coordinates of second point of arc
+ def addArcAbsolute (self, x, y ):
+ """
+ Add arc, which connects the given point with previous point
+ Coordinates are considered as absolute.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+
+ Parameters:
+ param x, y - Coordinates of second point of arc
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addArcAbsolute(50, 10)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":AA %s %s" % (printVar(x), printVar(y))
+ pass
+
+ ## Add arc, which connects the given point with previous point
+ # Coordinates are considered relative to the previous point.
+ #
+ # @param dx, dy - Coordinates of second point of arc relative to the previous point
+ def addArcRelative (self, dx, dy ):
+ """
+ Add arc, which connects the given point with previous point
+ Coordinates are considered relative to the previous point.
+
+ Parameters:
+ param dx, dy - Coordinates of second point of arc
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addArcRelative(50, 10)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":A %s %s" % (printVar(dx), printVar(dy))
+ pass
+
+ ## Add arc, defined by radius and coordinates of next point.
+ # Coordinates are considered as absolute.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ #
+ # @param x, y - Coordinates of second point of arc
+ # @param radius - radius of arc
+ # @param flag - is 0 or 2
+ # if 0 the drawn arc is the one of lower angle (<Pi)
+ # if 2 the drawn arc is the one of greater angle (>Pi)
+ def addArcRadiusAbsolute (self, x, y, radius, flag ):
+ """
+ Add arc, defined by radius and coordinates of next point.
+ Coordinates are considered as absolute.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+
+ Parameters:
+ param x, y - Coordinates of second point of arc
+ param radius - radius of arc
+ param flag - is 0 or 2
+ if 0 the drawn arc is the one of lower angle (<Pi)
+ if 2 the drawn arc is the one of greater angle (>Pi)
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addArcRadiusAbsolute(50, 10, 20, 0)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":UU %s %s %s %s" % (printVar(x), printVar(y), printVar(radius), printVar(flag))
+ pass
+
+ ## Add arc, defined by radius and coordinates of next point.
+ # Coordinates are considered relative to the previous point.
+ #
+ # @param dx, dy - Coordinates of second point of arc
+ # @param radius - radius of arc
+ # @param flag - is 0 or 2
+ # if 0 the drawn arc is the one of lower angle (<Pi)
+ # if 2 the drawn arc is the one of greater angle (>Pi)
+ def addArcRadiusRelative (self, dx, dy, radius, flag ):
+ """
+ Add arc, defined by radius and coordinates of next point.
+ Coordinates are considered relative to the previous point.
+
+ Parameters:
+ param dx, dy - Coordinates of second point of arc
+ param radius - radius of arc
+ param flag - is 0 or 2
+ if 0 the drawn arc is the one of lower angle (<Pi)
+ if 2 the drawn arc is the one of greater angle (>Pi)
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addArcRadiusRelative(-30, -15, 20, 2)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":U %s %s %s %s" % (printVar(dx), printVar(dy), printVar(radius), printVar(flag))
+ pass
+
+ ## Add arc, defined by coordinates of next point and coordinates of center.
+ # Coordinates are considered as absolute.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ #
+ # @param x, y - Coordinates of second point of arc
+ # @param xc, yc - Coordinates of center
+ # @param flag1 - (reverse) is 0 or 2
+ # if 0 the drawn arc is the one of lower angle (<Pi)
+ # if 2 the drawn arc is the one of greater angle (>Pi)
+ # @param flag2 - (control tolerance) is 0 or 1
+ # if 0 the specified end point can be at a distance of the arc
+ def addArcCenterAbsolute (self, x, y, xc, yc, flag1, flag2 ):
+ """
+ Add arc, defined by coordinates of next point and coordinates of center.
+ Coordinates are considered as absolute.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+
+ Parameters:
+ param x, y - Coordinates of second point of arc
+ param xc, yc - Coordinates of center
+ param flag1 - is 0 or 2
+ if 0 the drawn arc is the one of lower angle (<Pi)
+ if 2 the drawn arc is the one of greater angle (>Pi)
+ param flag2 - (control tolerance) is 0 or 1
+ if 0 the specified end point can be at a distance of the arc
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addArcCenterAbsolute(-30, -15, 20, 10, 0, 0)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":EE %s %s %s %s %s %s" % (printVar(xc), printVar(yc), printVar(x), printVar(y),
+ printVar(flag1), printVar(flag2))
+ pass
+
+ ## Add arc, defined by coordinates of next point and coordinates of center.
+ # Coordinates are considered relative to the previous point.
+ #
+ # @param dx, dy - Coordinates of second point of arc
+ # @param xc, yc - Coordinates of center
+ # @param flag1 - (reverse) is 0 or 2
+ # if 0 the drawn arc is the one of lower angle (<Pi)
+ # if 2 the drawn arc is the one of greater angle (>Pi)
+ # @param flag2 - (control tolerance) is 0 or 1
+ # if 0 the specified end point can be at a distance of the arc
+ def addArcCenterRelative (self, dx, dy, xc, yc, flag1, flag2 ):
+ """
+ Add arc, defined by coordinates of next point and coordinates of center.
+ Coordinates are considered relative to the previous point.
+
+ Parameters:
+ param dx, dy - Coordinates of second point of arc
+ param xc, yc - Coordinates of center
+ param flag1 - is 0 or 2
+ if 0 the drawn arc is the one of lower angle (<Pi)
+ if 2 the drawn arc is the one of greater angle (>Pi)
+ param flag2 - (control tolerance) is 0 or 1
+ if 0 the specified end point can be at a distance of the arc
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addArcCenterRelative(-30, -15, 20, 10, 2, 1)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":E %s %s %s %s %s %s" % (printVar(xc), printVar(yc), printVar(dx), printVar(dy),
+ printVar(flag1), printVar(flag2))
+ pass
+
+ ## Add arc, defined by angle, radius and length.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ #
+ # @param angle - angle in a plane
+ # @param radius - radius of the arc
+ # @param length - length of the arc
+ def addArcAngleRadiusLength (self, angle, radius, length ):
+ """
+ Add arc, defined by angle, radius and length.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+
+ Parameters:
+ param angle - angle in a plane
+ param radius - radius of the arc
+ param length - length of the arc
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addArcAngleRadiusLength(30, 15, 40)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":R %s:C %s %s" % (printVar(angle), printVar(radius), printVar(length))
+ pass
+
+ ## Add arc, defined by perpendicular(angle=90), radius and length.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ #
+ # @param radius - radius of the arc
+ # @param length - length of the arc
+ def addArcPerpRadiusLength (self, radius, length ):
+ """
+ Add arc, defined by perpendicular(angle=90), radius and length.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+
+ Parameters:
+ param radius - radius of the arc
+ param length - length of the arc
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addArcPerpRadiusLength(15, 40)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":R 90:C %s %s" % (printVar(radius), printVar(length))
+ pass
+
+ ## Add arc, defined by previous direction, radius and length.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ #
+ # @param radius - radius of the arc
+ # @param length - length of the arc
+ def addArcRadiusLength (self, radius, length ):
+ """
+ Add arc, defined by previous direction, radius and length.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+
+ Parameters:
+ param radius - radius of the arc
+ param length - length of the arc
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addArcRadiusLength(15, 40)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":C %s %s" % (printVar(radius), printVar(length))
+ pass
+
+ ## Add arc, defined by direction, radius and length.
+ # If the first point of sketcher is not yet defined, the
+ # origin (0, 0) will become the first sketcher point.
+ #
+ # @param dx, dy - direction of the arc
+ # @param radius - radius of the arc
+ # @param length - length of the arc
+ def addArcDirectionRadiusLength (self, dx, dy, radius, length ):
+ """
+ Add arc, defined by direction, radius and length.
+ If the first point of sketcher is not yet defined, the
+ origin (0, 0) will become the first sketcher point.
+
+ Parameters:
+ param dx, dy - direction of the arc
+ param radius - radius of the arc
+ param length - length of the arc
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addArcDirectionRadiusLength(-50, 40, 20, 3.5)
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.myCommand = self.myCommand + ":D %s %s:C %s %s" % (printVar(dx), printVar(dy), printVar(radius), printVar(length))
+ pass
+
+ ## Set to close the wire
+ def close (self):
+ """
+ Set to close the wire
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addPoint(15, 85.6)
+ sk.close()
+ Sketcher_1 = sk.wire(geomObj_1)
+ """
+ self.closed = True
+ pass
+
+ ## Obtain the sketcher result as a wire.
+ #
+ # @param WorkingPlane - current Working Plane used for this 2DSketcher
+ # @param theName Object name; when specified, this parameter is used
+ # for result publication in the study. Otherwise, if automatic
+ # publication is switched on, default value is used for result name.
+ #
+ # @return New GEOM_Object, containing the created wire
+ def wire (self, WorkingPlane=[0, 0, 0, 0, 0, 1, 1, 0, 0], theName=None):
+ """
+ Obtain the sketcher result as a wire.
+
+ Parameters:
+ theName Object name; when specified, this parameter is used
+ for result publication in the study. Otherwise, if automatic
+ publication is switched on, default value is used for result name
+ param WorkingPlane - current Working Plane used for this 2DSketcher
+
+ Returns:
+ New GEOM_Object, containing the created wire.
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addPoint(30, 70)
+ a3D_Sketcher_1 = sk.wire(geomObj_1)
+ """
+
+ if self.closed:
+ self.myCommand = self.myCommand + ":WW"
+
+ import GEOM
+ if isinstance(WorkingPlane, list): wire = self.geompyD.CurvesOp.MakeSketcher(self.myCommand, WorkingPlane)
+ if isinstance(WorkingPlane, GEOM._objref_GEOM_Object): wire = self.geompyD.CurvesOp.MakeSketcherOnPlane(self.myCommand, WorkingPlane)
+
+ self.myCommand = "Sketcher"
+ self.geompyD._autoPublish(wire, theName, "wire")
+ return wire
+
+ ## Obtain the sketcher result as a face.
+ #
+ # @param WorkingPlane - current Working Plane used for this 2DSketcher
+ # @param theName Object name; when specified, this parameter is used
+ # for result publication in the study. Otherwise, if automatic
+ # publication is switched on, default value is used for result name.
+ #
+ # @return New GEOM_Object, containing the created face
+ def face (self, WorkingPlane=[0, 0, 0, 0, 0, 1, 1, 0, 0], theName=None):
+ """
+ Obtain the sketcher result as a face.
+
+ Parameters:
+ theName Object name; when specified, this parameter is used
+ for result publication in the study. Otherwise, if automatic
+ publication is switched on, default value is used for result name
+ param WorkingPlane - current Working Plane used for this 2DSketcher
+
+ Returns:
+ New GEOM_Object, containing the created face.
+
+ Example of usage:
+ sk = geompy.Sketcher2D()
+ sk.addPoint(0, 0)
+ sk.addSegment(100, 0)
+ sk.addSegment(100, 100)
+ sk.addSegment(0, 100)
+ sk.close()
+ a3D_Sketcher_1 = sk.face(geomObj_1)
+ """
+
+ if self.closed:
+ self.myCommand = self.myCommand + ":WF"
+ else:
+ raise RuntimeError, "Sketcher2D.close() : can't build face on unclosed wire"
+
+ import GEOM
+ if isinstance(WorkingPlane, list): face = self.geompyD.CurvesOp.MakeSketcher(self.myCommand, WorkingPlane)
+ if isinstance(WorkingPlane, GEOM._objref_GEOM_Object): face = self.geompyD.CurvesOp.MakeSketcherOnPlane(self.myCommand, WorkingPlane)
+
+ self.myCommand = "Sketcher"
+ self.geompyD._autoPublish(face, theName, "face")
+ return face
