# License along with this library; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
#
-# See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
#
#
#
# Module : GEOM
# $Header$
+import salome
+salome.salome_init()
from salome import *
+
import GEOM
"""
g = lcc.FindOrLoadComponent("FactoryServer", "GEOM")
geom = g._narrow( GEOM.GEOM_Gen )
-gg = ImportComponentGUI("GEOM")
-gg.initGeomGen()
+#gg = ImportComponentGUI("GEOM")
+#gg.initGeomGen()
#SRN: modified on Mar 18, 2005
PrimOp = None
ShapesOp = None
HealOp = None
-InsertOp = None
-BoolOp = None
+InsertOp = None
+BoolOp = None
TrsfOp = None
LocalOp = None
MeasuOp = None
BlocksOp = None
-GroupOp = None
-
+GroupOp = None
+
def init_geom(theStudy):
global myStudy, myBuilder, myStudyId, BasicOp, CurvesOp, PrimOp, ShapesOp, HealOp
global InsertOp, BoolOp, TrsfOp, LocalOp, MeasuOp, BlocksOp, GroupOp, father
-
+
myStudy = theStudy
myStudyId = myStudy._get_StudyId()
myBuilder = myStudy.NewBuilder()
aPixmap.SetPixMap("ICON_OBJBROWSER_Geometry")
myBuilder.DefineComponentInstance(father,geom)
pass
-
+
# -----------------------------------------------------------------------------
# Assign Operations Interfaces
# -----------------------------------------------------------------------------
LocalOp = geom.GetILocalOperations (myStudyId)
MeasuOp = geom.GetIMeasureOperations (myStudyId)
BlocksOp = geom.GetIBlocksOperations (myStudyId)
- GroupOp = geom.GetIGroupOperations (myStudyId)
+ GroupOp = geom.GetIGroupOperations (myStudyId)
pass
init_geom(myStudy)
#SRN: end of modifications
+## Get name for sub-shape aSubObj of shape aMainObj
+#
+# Example: see GEOM_TestAll.py
def SubShapeName(aSubObj, aMainObj):
- """
- * Get name for sub-shape aSubObj of shape aMainObj
-
- * Example: see GEOM_TestAll.py
- """
- aSubId = orb.object_to_string(aSubObj)
- aMainId = orb.object_to_string(aMainObj)
- index = gg.getIndexTopology(aSubId, aMainId)
- name = gg.getShapeTypeString(aSubId) + "_%d"%(index)
+ #aSubId = orb.object_to_string(aSubObj)
+ #aMainId = orb.object_to_string(aMainObj)
+ #index = gg.getIndexTopology(aSubId, aMainId)
+ #name = gg.getShapeTypeString(aSubId) + "_%d"%(index)
+ index = ShapesOp.GetTopologyIndex(aMainObj, aSubObj)
+ name = ShapesOp.GetShapeTypeString(aSubObj) + "_%d"%(index)
return name
+## Publish in study aShape with name aName
+#
+# Example: see GEOM_TestAll.py
def addToStudy(aShape, aName):
- """
- * Publish in study aShape with name aName
-
- * Example: see GEOM_TestAll.py
- """
try:
aSObject = geom.AddInStudy(myStudy, aShape, aName, None)
except:
return ""
return aShape.GetStudyEntry()
+## Publish in study aShape with name aName as sub-object of previously published aFather
+#
+# Example: see GEOM_TestAll.py
def addToStudyInFather(aFather, aShape, aName):
- """
- * Publish in study aShape with name aName as sub-object of previously published aFather
-
- * Example: see GEOM_TestAll.py
- """
try:
aSObject = geom.AddInStudy(myStudy, aShape, aName, aFather)
except:
return ""
return aShape.GetStudyEntry()
+# -----------------------------------------------------------------------------
+# Raise an Error if Operation is Failed
+# -----------------------------------------------------------------------------
+def RaiseIfFailed (method_name, operation):
+ if operation.IsDone() == 0:
+ raise RuntimeError, method_name + " : " + operation.GetErrorCode()
+
# -----------------------------------------------------------------------------
# enumeration ShapeType as a dictionary
# -----------------------------------------------------------------------------
ShapeType = {"COMPOUND":0, "COMPSOLID":1, "SOLID":2, "SHELL":3, "FACE":4, "WIRE":5, "EDGE":6, "VERTEX":7, "SHAPE":8}
+# -----------------------------------------------------------------------------
+# enumeration shape_kind
+# -----------------------------------------------------------------------------
+
+kind = GEOM.GEOM_IKindOfShape
+
+class info:
+ UNKNOWN = 0
+ CLOSED = 1
+ UNCLOSED = 2
+
# -----------------------------------------------------------------------------
# Basic primitives
# -----------------------------------------------------------------------------
+## Create point by three coordinates.
+# @param theX The X coordinate of the point.
+# @param theY The Y coordinate of the point.
+# @param theZ The Z coordinate of the point.
+# @return New GEOM_Object, containing the created point.
+#
+# Example: see GEOM_TestAll.py
def MakeVertex(theX, theY, theZ):
- """
- * Create point by three coordinates.
- * \param theX The X coordinate of the point.
- * \param theY The Y coordinate of the point.
- * \param theZ The Z coordinate of the point.
- * \return New GEOM_Object, containing the created point.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BasicOp.MakePointXYZ(theX, theY, theZ)
- if BasicOp.IsDone() == 0:
- print "MakePointXYZ : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakePointXYZ", BasicOp)
return anObj
+## Create a point, distant from the referenced point
+# on the given distances along the coordinate axes.
+# @param theReference The referenced point.
+# @param theX Displacement from the referenced point along OX axis.
+# @param theY Displacement from the referenced point along OY axis.
+# @param theZ Displacement from the referenced point along OZ axis.
+# @return New GEOM_Object, containing the created point.
+#
+# Example: see GEOM_TestAll.py
def MakeVertexWithRef(theReference, theX, theY, theZ):
- """
- * Create a point, distant from the referenced point
- * on the given distances along the coordinate axes.
- * \param theReference The referenced point.
- * \param theX Displacement from the referenced point along OX axis.
- * \param theY Displacement from the referenced point along OY axis.
- * \param theZ Displacement from the referenced point along OZ axis.
- * \return New GEOM_Object, containing the created point.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BasicOp.MakePointWithReference(theReference, theX, theY, theZ)
- if BasicOp.IsDone() == 0:
- print "MakePointWithReference : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakePointWithReference", BasicOp)
return anObj
+## Create a point, corresponding to the given parameter on the given curve.
+# @param theRefCurve The referenced curve.
+# @param theParameter Value of parameter on the referenced curve.
+# @return New GEOM_Object, containing the created point.
+#
+# Example: see GEOM_TestAll.py
def MakeVertexOnCurve(theRefCurve, theParameter):
- """
- * Create a point, corresponding to the given parameter on the given curve.
- * \param theRefCurve The referenced curve.
- * \param theParameter Value of parameter on the referenced curve.
- * \return New GEOM_Object, containing the created point.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BasicOp.MakePointOnCurve(theRefCurve, theParameter)
- if BasicOp.IsDone() == 0:
- print "MakePointOnCurve : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakePointOnCurve", BasicOp)
return anObj
+## Create a point on intersection of two lines.
+# @param theRefLine1, theRefLine2 The referenced lines.
+# @return New GEOM_Object, containing the created point.
+#
+# Example: see GEOM_TestAll.py
+def MakeVertexOnLinesIntersection(theRefLine1, theRefLine2):
+ anObj = BasicOp.MakePointOnCurve(theRefLine1, theRefLine2)
+ RaiseIfFailed("MakePointOnLinesIntersection", BasicOp)
+ return anObj
+
+## Create a tangent, corresponding to the given parameter on the given curve.
+# @param theRefCurve The referenced curve.
+# @param theParameter Value of parameter on the referenced curve.
+# @return New GEOM_Object, containing the created tangent.
+def MakeTangentOnCurve(theRefCurve, theParameter):
+ anObj = BasicOp.MakeTangentOnCurve(theRefCurve, theParameter)
+ RaiseIfFailed("MakeTangentOnCurve", BasicOp)
+ return anObj
+
+## Create a vector with the given components.
+# @param theDX X component of the vector.
+# @param theDY Y component of the vector.
+# @param theDZ Z component of the vector.
+# @return New GEOM_Object, containing the created vector.
+#
+# Example: see GEOM_TestAll.py
def MakeVectorDXDYDZ(theDX, theDY, theDZ):
- """
- * Create a vector with the given components.
- * \param theDX X component of the vector.
- * \param theDY Y component of the vector.
- * \param theDZ Z component of the vector.
- * \return New GEOM_Object, containing the created vector.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BasicOp.MakeVectorDXDYDZ(theDX, theDY, theDZ)
- if BasicOp.IsDone() == 0:
- print "MakeVectorDXDYDZ : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakeVectorDXDYDZ", BasicOp)
return anObj
+## Create a vector between two points.
+# @param thePnt1 Start point for the vector.
+# @param thePnt2 End point for the vector.
+# @return New GEOM_Object, containing the created vector.
+
+# Example: see GEOM_TestAll.py
def MakeVector(thePnt1, thePnt2):
- """
- * Create a vector between two points.
- * \param thePnt1 Start point for the vector.
- * \param thePnt2 End point for the vector.
- * \return New GEOM_Object, containing the created vector.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BasicOp.MakeVectorTwoPnt(thePnt1, thePnt2)
- if BasicOp.IsDone() == 0:
- print "MakeVectorTwoPnt : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakeVectorTwoPnt", BasicOp)
return anObj
+## Create a line, passing through the given point
+# and parrallel to the given direction
+# @param thePnt Point. The resulting line will pass through it.
+# @param theDir Direction. The resulting line will be parallel to it.
+# @return New GEOM_Object, containing the created line.
+#
+# Example: see GEOM_TestAll.py
def MakeLine(thePnt, theDir):
- """
- * Create a line, passing through the given point
- * and parrallel to the given direction
- * \param thePnt Point. The resulting line will pass through it.
- * \param theDir Direction. The resulting line will be parallel to it.
- * \return New GEOM_Object, containing the created line.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BasicOp.MakeLine(thePnt, theDir)
- if BasicOp.IsDone() == 0:
- print "MakeLine : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakeLine", BasicOp)
return anObj
+## Create a line, passing through the given points
+# @param thePnt1 First of two points, defining the line.
+# @param thePnt2 Second of two points, defining the line.
+# @return New GEOM_Object, containing the created line.
+#
+# Example: see GEOM_TestAll.py
def MakeLineTwoPnt(thePnt1, thePnt2):
- """
- * Create a line, passing through the given points
- * \param thePnt1 First of two points, defining the line.
- * \param thePnt2 Second of two points, defining the line.
- * \return New GEOM_Object, containing the created line.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BasicOp.MakeLineTwoPnt(thePnt1, thePnt2)
- if BasicOp.IsDone() == 0:
- print "MakeLineTwoPnt : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakeLineTwoPnt", BasicOp)
return anObj
+## Create a line on two faces intersection.
+# @param theFace1 First of two faces, defining the line.
+# @param theFace2 Second of two faces, defining the line.
+# @return New GEOM_Object, containing the created line.
+#
+# Example: see GEOM_TestAll.py
+def MakeLineTwoFaces(theFace1, theFace2):
+ anObj = BasicOp.MakeLineTwoFaces(theFace1, theFace2)
+ RaiseIfFailed("MakeLineTwoFaces", BasicOp)
+ return anObj
+
+## Create a plane, passing through the given point
+# and normal to the given vector.
+# @param thePnt Point, the plane has to pass through.
+# @param theVec Vector, defining the plane normal direction.
+# @param theTrimSize Half size of a side of quadrangle face, representing the plane.
+# @return New GEOM_Object, containing the created plane.
+#
+# Example: see GEOM_TestAll.py
def MakePlane(thePnt, theVec, theTrimSize):
- """
- * Create a plane, passing through the given point
- * and normal to the given vector.
- * \param thePnt Point, the plane has to pass through.
- * \param theVec Vector, defining the plane normal direction.
- * \param theTrimSize Half size of a side of quadrangle face, representing the plane.
- * \return New GEOM_Object, containing the created plane.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BasicOp.MakePlanePntVec(thePnt, theVec, theTrimSize)
- if BasicOp.IsDone() == 0:
- print "MakePlanePntVec : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakePlanePntVec", BasicOp)
return anObj
+## Create a plane, passing through the three given points
+# @param thePnt1 First of three points, defining the plane.
+# @param thePnt2 Second of three points, defining the plane.
+# @param thePnt3 Fird of three points, defining the plane.
+# @param theTrimSize Half size of a side of quadrangle face, representing the plane.
+# @return New GEOM_Object, containing the created plane.
+#
+# Example: see GEOM_TestAll.py
def MakePlaneThreePnt(thePnt1, thePnt2, thePnt3, theTrimSize):
- """
- * Create a plane, passing through the three given points
- * \param thePnt1 First of three points, defining the plane.
- * \param thePnt2 Second of three points, defining the plane.
- * \param thePnt3 Fird of three points, defining the plane.
- * \param theTrimSize Half size of a side of quadrangle face, representing the plane.
- * \return New GEOM_Object, containing the created plane.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BasicOp.MakePlaneThreePnt(thePnt1, thePnt2, thePnt3, theTrimSize)
- if BasicOp.IsDone() == 0:
- print "MakePlaneThreePnt : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakePlaneThreePnt", BasicOp)
return anObj
+## Create a plane, similar to the existing one, but with another size of representing face.
+# @param theFace Referenced plane or LCS(Marker).
+# @param theTrimSize New half size of a side of quadrangle face, representing the plane.
+# @return New GEOM_Object, containing the created plane.
+#
+# Example: see GEOM_TestAll.py
def MakePlaneFace(theFace, theTrimSize):
- """
- * Create a plane, similar to the existing one, but with another size of representing face.
- * \param theFace Referenced plane.
- * \param theTrimSize New half size of a side of quadrangle face, representing the plane.
- * \return New GEOM_Object, containing the created plane.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BasicOp.MakePlaneFace(theFace, theTrimSize)
- if BasicOp.IsDone() == 0:
- print "MakePlaneFace : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakePlaneFace", BasicOp)
return anObj
+## Create a local coordinate system.
+# @param OX,OY,OZ Three coordinates of coordinate system origin.
+# @param XDX,XDY,XDZ Three components of OX direction
+# @param YDX,YDY,YDZ Three components of OY direction
+# @return New GEOM_Object, containing the created coordinate system.
+#
+# Example: see GEOM_TestAll.py
def MakeMarker(OX,OY,OZ, XDX,XDY,XDZ, YDX,YDY,YDZ):
- """
- * Create a local coordinate system.
- * \param OX,OY,OZ Three coordinates of coordinate system origin.
- * \param XDX,XDY,XDZ Three components of OX direction
- * \param YDX,YDY,YDZ Three components of OY direction
- * \return New GEOM_Object, containing the created coordinate system.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BasicOp.MakeMarker(OX,OY,OZ, XDX,XDY,XDZ, YDX,YDY,YDZ)
- if BasicOp.IsDone() == 0:
- print "MakeMarker : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakeMarker", BasicOp)
return anObj
+## Create a local coordinate system.
+# @param theOrigin Point of coordinate system origin.
+# @param theXVec Vector of X direction
+# @param theYVec Vector of Y direction
+# @return New GEOM_Object, containing the created coordinate system.
def MakeMarkerPntTwoVec(theOrigin, theXVec, theYVec):
- """
- * Create a local coordinate system.
- * \param theOrigin Point of coordinate system origin.
- * \param theXVec Vector of X direction
- * \param theYVec Vector of Y direction
- * \return New GEOM_Object, containing the created coordinate system.
- """
O = PointCoordinates( theOrigin )
OXOY = []
for vec in [ theXVec, theYVec ]:
anObj = BasicOp.MakeMarker( O[0], O[1], O[2],
OXOY[0], OXOY[1], OXOY[2],
OXOY[3], OXOY[4], OXOY[5], )
- if BasicOp.IsDone() == 0:
- print "MakeMarker : ", BasicOp.GetErrorCode()
+ RaiseIfFailed("MakeMarker", BasicOp)
return anObj
# -----------------------------------------------------------------------------
# Curves
# -----------------------------------------------------------------------------
+## Create an arc of circle, passing through three given points.
+# @param thePnt1 Start point of the arc.
+# @param thePnt2 Middle point of the arc.
+# @param thePnt3 End point of the arc.
+# @return New GEOM_Object, containing the created arc.
+#
+# Example: see GEOM_TestAll.py
def MakeArc(thePnt1, thePnt2, thePnt3):
- """
- * Create an arc of circle, passing through three given points.
- * \param thePnt1 Start point of the arc.
- * \param thePnt2 Middle point of the arc.
- * \param thePnt3 End point of the arc.
- * \return New GEOM_Object, containing the created arc.
-
- * Example: see GEOM_TestAll.py
- """
anObj = CurvesOp.MakeArc(thePnt1, thePnt2, thePnt3)
- if CurvesOp.IsDone() == 0:
- print "MakeArc : ", CurvesOp.GetErrorCode()
+ RaiseIfFailed("MakeArc", CurvesOp)
+ return anObj
+
+## Create an arc of circle from a center and 2 points.
+# @param thePnt1 Center of the arc
+# @param thePnt2 Start point of the arc. (Gives also the radius of the arc)
+# @param thePnt3 End point of the arc (Gives also a direction)
+# @return New GEOM_Object, containing the created arc.
+#
+# Example: see GEOM_TestAll.py
+def MakeArcCenter(thePnt1, thePnt2, thePnt3,theSense):
+ anObj = CurvesOp.MakeArcCenter(thePnt1, thePnt2, thePnt3,theSense)
+ RaiseIfFailed("MakeArcCenter", CurvesOp)
return anObj
+## Create a circle with given center, normal vector and radius.
+# @param thePnt Circle center.
+# @param theVec Vector, normal to the plane of the circle.
+# @param theR Circle radius.
+# @return New GEOM_Object, containing the created circle.
+#
+# Example: see GEOM_TestAll.py
def MakeCircle(thePnt, theVec, theR):
- """
- * Create a circle with given center, normal vector and radius.
- * \param thePnt Circle center.
- * \param theVec Vector, normal to the plane of the circle.
- * \param theR Circle radius.
- * \return New GEOM_Object, containing the created circle.
-
- * Example: see GEOM_TestAll.py
- """
anObj = CurvesOp.MakeCirclePntVecR(thePnt, theVec, theR)
- if CurvesOp.IsDone() == 0:
- print "MakeCirclePntVecR : ", CurvesOp.GetErrorCode()
+ RaiseIfFailed("MakeCirclePntVecR", CurvesOp)
return anObj
+## Create a circle, passing through three given points
+# @param thePnt1,thePnt2,thePnt3 Points, defining the circle.
+# @return New GEOM_Object, containing the created circle.
+#
+# Example: see GEOM_TestAll.py
def MakeCircleThreePnt(thePnt1, thePnt2, thePnt3):
- """
- * Create a circle, passing through three given points
- * \param thePnt1,thePnt2,thePnt3 Points, defining the circle.
- * \return New GEOM_Object, containing the created circle.
-
- * Example: see GEOM_TestAll.py
- """
anObj = CurvesOp.MakeCircleThreePnt(thePnt1, thePnt2, thePnt3)
- if CurvesOp.IsDone() == 0:
- print "MakeCircleThreePnt : ", CurvesOp.GetErrorCode()
+ RaiseIfFailed("MakeCircleThreePnt", CurvesOp)
return anObj
+## Create a circle, with given point1 as center,
+# passing through the point2 as radius and laying in the plane,
+# defined by all three given points.
+# @param thePnt1,thePnt2,thePnt3 Points, defining the circle.
+# @return New GEOM_Object, containing the created circle.
+#
+# Example: see GEOM_example6.py
+def MakeCircleCenter2Pnt(thePnt1, thePnt2, thePnt3):
+ anObj = CurvesOp.MakeCircleCenter2Pnt(thePnt1, thePnt2, thePnt3)
+ RaiseIfFailed("MakeCircleCenter2Pnt", CurvesOp)
+ return anObj
+
+## Create an ellipse with given center, normal vector and radiuses.
+# @param thePnt Ellipse center.
+# @param theVec Vector, normal to the plane of the ellipse.
+# @param theRMajor Major ellipse radius.
+# @param theRMinor Minor ellipse radius.
+# @return New GEOM_Object, containing the created ellipse.
+#
+# Example: see GEOM_TestAll.py
def MakeEllipse(thePnt, theVec, theRMajor, theRMinor):
- """
- * Create an ellipse with given center, normal vector and radiuses.
- * \param thePnt Ellipse center.
- * \param theVec Vector, normal to the plane of the ellipse.
- * \param theRMajor Major ellipse radius.
- * \param theRMinor Minor ellipse radius.
- * \return New GEOM_Object, containing the created ellipse.
-
- * Example: see GEOM_TestAll.py
- """
anObj = CurvesOp.MakeEllipse(thePnt, theVec, theRMajor, theRMinor)
- if CurvesOp.IsDone() == 0:
- print "MakeEllipse : ", CurvesOp.GetErrorCode()
+ RaiseIfFailed("MakeEllipse", CurvesOp)
return anObj
+## Create a polyline on the set of points.
+# @param thePoints Sequence of points for the polyline.
+# @return New GEOM_Object, containing the created polyline.
+#
+# Example: see GEOM_TestAll.py
def MakePolyline(thePoints):
- """
- * Create a polyline on the set of points.
- * \param thePoints Sequence of points for the polyline.
- * \return New GEOM_Object, containing the created polyline.
-
- * Example: see GEOM_TestAll.py
- """
anObj = CurvesOp.MakePolyline(thePoints)
- if CurvesOp.IsDone() == 0:
- print "MakePolyline : ", CurvesOp.GetErrorCode()
+ RaiseIfFailed("MakePolyline", CurvesOp)
return anObj
+## Create bezier curve on the set of points.
+# @param thePoints Sequence of points for the bezier curve.
+# @return New GEOM_Object, containing the created bezier curve.
+#
+# Example: see GEOM_TestAll.py
def MakeBezier(thePoints):
- """
- * Create bezier curve on the set of points.
- * \param thePoints Sequence of points for the bezier curve.
- * \return New GEOM_Object, containing the created bezier curve.
-
- * Example: see GEOM_TestAll.py
- """
anObj = CurvesOp.MakeSplineBezier(thePoints)
- if CurvesOp.IsDone() == 0:
- print "MakeSplineBezier : ", CurvesOp.GetErrorCode()
+ RaiseIfFailed("MakeSplineBezier", CurvesOp)
return anObj
+## Create B-Spline curve on the set of points.
+# @param thePoints Sequence of points for the B-Spline curve.
+# @return New GEOM_Object, containing the created B-Spline curve.
+#
+# Example: see GEOM_TestAll.py
def MakeInterpol(thePoints):
- """
- * Create B-Spline curve on the set of points.
- * \param thePoints Sequence of points for the B-Spline curve.
- * \return New GEOM_Object, containing the created B-Spline curve.
-
- * Example: see GEOM_TestAll.py
- """
anObj = CurvesOp.MakeSplineInterpolation(thePoints)
- if CurvesOp.IsDone() == 0:
- print "MakeSplineInterpolation : ", CurvesOp.GetErrorCode()
+ RaiseIfFailed("MakeSplineInterpolation", CurvesOp)
return anObj
+## Create a sketcher (wire or face), following the textual description,
+# passed through \a theCommand argument. \n
+# Edges of the resulting wire or face will be arcs of circles and/or linear segments. \n
+# Format of the description string have to be the following:
+#
+# "Sketcher[:F x1 y1]:CMD[:CMD[:CMD...]]"
+#
+# Where:
+# - x1, y1 are coordinates of the first sketcher point (zero by default),
+# - CMD is one of
+# - "R angle" : Set the direction by angle
+# - "D dx dy" : Set the direction by DX & DY
+# .
+# \n
+# - "TT x y" : Create segment by point at X & Y
+# - "T dx dy" : Create segment by point with DX & DY
+# - "L length" : Create segment by direction & Length
+# - "IX x" : Create segment by direction & Intersect. X
+# - "IY y" : Create segment by direction & Intersect. Y
+# .
+# \n
+# - "C radius length" : Create arc by direction, radius and length(in degree)
+# .
+# \n
+# - "WW" : Close Wire (to finish)
+# - "WF" : Close Wire and build face (to finish)
+#
+# @param theCommand String, defining the sketcher in local
+# coordinates of the working plane.
+# @param theWorkingPlane Nine double values, defining origin,
+# OZ and OX directions of the working plane.
+# @return New GEOM_Object, containing the created wire.
+#
+# Example: see GEOM_TestAll.py
def MakeSketcher(theCommand, theWorkingPlane = [0,0,0, 0,0,1, 1,0,0]):
- """
- * Create a sketcher (wire or face), following the textual description,
- * passed through \a theCommand argument. \n
- * Edges of the resulting wire or face will be arcs of circles and/or linear segments. \n
- * Format of the description string have to be the following:
- *
- * "Sketcher[:F x1 y1]:CMD[:CMD[:CMD...]]"
- *
- * Where:
- * - x1, y1 are coordinates of the first sketcher point (zero by default),
- * - CMD is one of
- * - "R angle" : Set the direction by angle
- * - "D dx dy" : Set the direction by DX & DY
- * .
- * \n
- * - "TT x y" : Create segment by point at X & Y
- * - "T dx dy" : Create segment by point with DX & DY
- * - "L length" : Create segment by direction & Length
- * - "IX x" : Create segment by direction & Intersect. X
- * - "IY y" : Create segment by direction & Intersect. Y
- * .
- * \n
- * - "C radius length" : Create arc by direction, radius and length(in degree)
- * .
- * \n
- * - "WW" : Close Wire (to finish)
- * - "WF" : Close Wire and build face (to finish)
- *
- * \param theCommand String, defining the sketcher in local
- * coordinates of the working plane.
- * \param theWorkingPlane Nine double values, defining origin,
- * OZ and OX directions of the working plane.
- * \return New GEOM_Object, containing the created wire.
-
- * Example: see GEOM_TestAll.py
- """
anObj = CurvesOp.MakeSketcher(theCommand, theWorkingPlane)
- if CurvesOp.IsDone() == 0:
- print "MakeSketcher : ", CurvesOp.GetErrorCode()
+ RaiseIfFailed("MakeSketcher", CurvesOp)
return anObj
+## Create a sketcher (wire or face), following the textual description,
+# passed through \a theCommand argument. \n
+# For format of the description string see the previous method.\n
+# @param theCommand String, defining the sketcher in local
+# coordinates of the working plane.
+# @param theWorkingPlane Planar Face or LCS(Marker) of the working plane.
+# @return New GEOM_Object, containing the created wire.
def MakeSketcherOnPlane(theCommand, theWorkingPlane):
- """
- * Create a sketcher (wire or face), following the textual description,
- * passed through \a theCommand argument. \n
- * For format of the description string see the previous method.\n
- * \param theCommand String, defining the sketcher in local
- * coordinates of the working plane.
- * \param theWorkingPlane Planar Face of the working plane.
- * \return New GEOM_Object, containing the created wire.
- """
anObj = CurvesOp.MakeSketcherOnPlane(theCommand, theWorkingPlane)
- if CurvesOp.IsDone() == 0:
- print "MakeSketcher : ", CurvesOp.GetErrorCode()
+ RaiseIfFailed("MakeSketcherOnPlane", CurvesOp)
return anObj
# -----------------------------------------------------------------------------
# Create 3D Primitives
# -----------------------------------------------------------------------------
+## Create a box by coordinates of two opposite vertices.
+#
+# Example: see GEOM_TestAll.py
def MakeBox(x1,y1,z1,x2,y2,z2):
- """
- * Create a box by coordinates of two opposite vertices.
-
- * Example: see GEOM_TestAll.py
- """
pnt1 = MakeVertex(x1,y1,z1)
pnt2 = MakeVertex(x2,y2,z2)
return MakeBoxTwoPnt(pnt1,pnt2)
+## Create a box with specified dimensions along the coordinate axes
+# and with edges, parallel to the coordinate axes.
+# Center of the box will be at point (DX/2, DY/2, DZ/2).
+# @param theDX Length of Box edges, parallel to OX axis.
+# @param theDY Length of Box edges, parallel to OY axis.
+# @param theDZ Length of Box edges, parallel to OZ axis.
+# @return New GEOM_Object, containing the created box.
+#
+# Example: see GEOM_TestAll.py
def MakeBoxDXDYDZ(theDX, theDY, theDZ):
- """
- * Create a box with specified dimensions along the coordinate axes
- * and with edges, parallel to the coordinate axes.
- * Center of the box will be at point (DX/2, DY/2, DZ/2).
- * \param theDX Length of Box edges, parallel to OX axis.
- * \param theDY Length of Box edges, parallel to OY axis.
- * \param theDZ Length of Box edges, parallel to OZ axis.
- * \return New GEOM_Object, containing the created box.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeBoxDXDYDZ(theDX, theDY, theDZ)
- if PrimOp.IsDone() == 0:
- print "MakeBoxDXDYDZ : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakeBoxDXDYDZ", PrimOp)
return anObj
+## Create a box with two specified opposite vertices,
+# and with edges, parallel to the coordinate axes
+# @param thePnt1 First of two opposite vertices.
+# @param thePnt2 Second of two opposite vertices.
+# @return New GEOM_Object, containing the created box.
+#
+# Example: see GEOM_TestAll.py
def MakeBoxTwoPnt(thePnt1, thePnt2):
- """
- * Create a box with two specified opposite vertices,
- * and with edges, parallel to the coordinate axes
- * \param thePnt1 First of two opposite vertices.
- * \param thePnt2 Second of two opposite vertices.
- * \return New GEOM_Object, containing the created box.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeBoxTwoPnt(thePnt1, thePnt2)
- if PrimOp.IsDone() == 0:
- print "MakeBoxTwoPnt : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakeBoxTwoPnt", PrimOp)
return anObj
+## Create a cylinder with given base point, axis, radius and height.
+# @param thePnt Central point of cylinder base.
+# @param theAxis Cylinder axis.
+# @param theR Cylinder radius.
+# @param theH Cylinder height.
+# @return New GEOM_Object, containing the created cylinder.
+#
+# Example: see GEOM_TestAll.py
def MakeCylinder(thePnt, theAxis, theR, theH):
- """
- * Create a cylinder with given base point, axis, radius and height.
- * \param thePnt Central point of cylinder base.
- * \param theAxis Cylinder axis.
- * \param theR Cylinder radius.
- * \param theH Cylinder height.
- * \return New GEOM_Object, containing the created cylinder.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeCylinderPntVecRH(thePnt, theAxis, theR, theH)
- if PrimOp.IsDone() == 0:
- print "MakeCylinderPntVecRH : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakeCylinderPntVecRH", PrimOp)
return anObj
+## Create a cylinder with given radius and height at
+# the origin of coordinate system. Axis of the cylinder
+# will be collinear to the OZ axis of the coordinate system.
+# @param theR Cylinder radius.
+# @param theH Cylinder height.
+# @return New GEOM_Object, containing the created cylinder.
+#
+# Example: see GEOM_TestAll.py
def MakeCylinderRH(theR, theH):
- """
- * Create a cylinder with given radius and height at
- * the origin of coordinate system. Axis of the cylinder
- * will be collinear to the OZ axis of the coordinate system.
- * \param theR Cylinder radius.
- * \param theH Cylinder height.
- * \return New GEOM_Object, containing the created cylinder.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeCylinderRH(theR, theH)
- if PrimOp.IsDone() == 0:
- print "MakeCylinderRH : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakeCylinderRH", PrimOp)
return anObj
+## Create a sphere with given center and radius.
+# @param thePnt Sphere center.
+# @param theR Sphere radius.
+# @return New GEOM_Object, containing the created sphere.
+#
+# Example: see GEOM_TestAll.py
def MakeSpherePntR(thePnt, theR):
- """
- * Create a sphere with given center and radius.
- * \param thePnt Sphere center.
- * \param theR Sphere radius.
- * \return New GEOM_Object, containing the created sphere.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeSpherePntR(thePnt, theR)
- if PrimOp.IsDone() == 0:
- print "MakeSpherePntR : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakeSpherePntR", PrimOp)
return anObj
+## Create a sphere with given center and radius.
+# @param x,y,z Coordinates of sphere center.
+# @param theR Sphere radius.
+# @return New GEOM_Object, containing the created sphere.
+#
+# Example: see GEOM_TestAll.py
def MakeSphere(x, y, z, theR):
- """
- * Create a sphere with given center and radius.
- * \param x,y,z Coordinates of sphere center.
- * \param theR Sphere radius.
- * \return New GEOM_Object, containing the created sphere.
-
- * Example: see GEOM_TestAll.py
- """
point = MakeVertex(x, y, z)
anObj = MakeSpherePntR(point, theR)
return anObj
+## Create a sphere with given radius at the origin of coordinate system.
+# @param theR Sphere radius.
+# @return New GEOM_Object, containing the created sphere.
+#
+# Example: see GEOM_TestAll.py
def MakeSphereR(theR):
- """
- * Create a sphere with given radius at the origin of coordinate system.
- * \param theR Sphere radius.
- * \return New GEOM_Object, containing the created sphere.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeSphereR(theR)
- if PrimOp.IsDone() == 0:
- print "MakeSphereR : ", PrimOp.GetErrorCode()
- return anObj
-
+ RaiseIfFailed("MakeSphereR", PrimOp)
+ return anObj
+
+## Create a cone with given base point, axis, height and radiuses.
+# @param thePnt Central point of the first cone base.
+# @param theAxis Cone axis.
+# @param theR1 Radius of the first cone base.
+# @param theR2 Radius of the second cone base.
+# \note If both radiuses are non-zero, the cone will be truncated.
+# \note If the radiuses are equal, a cylinder will be created instead.
+# @param theH Cone height.
+# @return New GEOM_Object, containing the created cone.
+#
+# Example: see GEOM_TestAll.py
def MakeCone(thePnt, theAxis, theR1, theR2, theH):
- """
- * Create a cone with given base point, axis, height and radiuses.
- * \param thePnt Central point of the first cone base.
- * \param theAxis Cone axis.
- * \param theR1 Radius of the first cone base.
- * \param theR2 Radius of the second cone base.
- * \note If both radiuses are non-zero, the cone will be truncated.
- * \note If the radiuses are equal, a cylinder will be created instead.
- * \param theH Cone height.
- * \return New GEOM_Object, containing the created cone.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeConePntVecR1R2H(thePnt, theAxis, theR1, theR2, theH)
- if PrimOp.IsDone() == 0:
- print "MakeConePntVecR1R2H : ", PrimOp.GetErrorCode()
- return anObj
-
+ RaiseIfFailed("MakeConePntVecR1R2H", PrimOp)
+ return anObj
+
+## Create a cone with given height and radiuses at
+# the origin of coordinate system. Axis of the cone will
+# be collinear to the OZ axis of the coordinate system.
+# @param theR1 Radius of the first cone base.
+# @param theR2 Radius of the second cone base.
+# \note If both radiuses are non-zero, the cone will be truncated.
+# \note If the radiuses are equal, a cylinder will be created instead.
+# @param theH Cone height.
+# @return New GEOM_Object, containing the created cone.
+#
+# Example: see GEOM_TestAll.py
def MakeConeR1R2H(theR1, theR2, theH):
- """
- * Create a cone with given height and radiuses at
- * the origin of coordinate system. Axis of the cone will
- * be collinear to the OZ axis of the coordinate system.
- * \param theR1 Radius of the first cone base.
- * \param theR2 Radius of the second cone base.
- * \note If both radiuses are non-zero, the cone will be truncated.
- * \note If the radiuses are equal, a cylinder will be created instead.
- * \param theH Cone height.
- * \return New GEOM_Object, containing the created cone.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeConeR1R2H(theR1, theR2, theH)
- if PrimOp.IsDone() == 0:
- print "MakeConeR1R2H : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakeConeR1R2H", PrimOp)
return anObj
+## Create a torus with given center, normal vector and radiuses.
+# @param thePnt Torus central point.
+# @param theVec Torus axis of symmetry.
+# @param theRMajor Torus major radius.
+# @param theRMinor Torus minor radius.
+# @return New GEOM_Object, containing the created torus.
+#
+# Example: see GEOM_TestAll.py
def MakeTorus(thePnt, theVec, theRMajor, theRMinor):
- """
- * Create a torus with given center, normal vector and radiuses.
- * \param thePnt Torus central point.
- * \param theVec Torus axis of symmetry.
- * \param theRMajor Torus major radius.
- * \param theRMinor Torus minor radius.
- * \return New GEOM_Object, containing the created torus.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeTorusPntVecRR(thePnt, theVec, theRMajor, theRMinor)
- if PrimOp.IsDone() == 0:
- print "MakeTorusPntVecRR : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakeTorusPntVecRR", PrimOp)
return anObj
+## Create a torus with given radiuses at the origin of coordinate system.
+# @param theRMajor Torus major radius.
+# @param theRMinor Torus minor radius.
+# @return New GEOM_Object, containing the created torus.
+#
+# Example: see GEOM_TestAll.py
def MakeTorusRR(theRMajor, theRMinor):
- """
- * Create a torus with given radiuses at the origin of coordinate system.
- * \param theRMajor Torus major radius.
- * \param theRMinor Torus minor radius.
- * \return New GEOM_Object, containing the created torus.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeTorusRR(theRMajor, theRMinor)
- if PrimOp.IsDone() == 0:
- print "MakeTorusRR : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakeTorusRR", PrimOp)
return anObj
+## Create a shape by extrusion of the base shape along a vector, defined by two points.
+# @param theBase Base shape to be extruded.
+# @param thePoint1 First end of extrusion vector.
+# @param thePoint2 Second end of extrusion vector.
+# @return New GEOM_Object, containing the created prism.
+#
+# Example: see GEOM_TestAll.py
def MakePrism(theBase, thePoint1, thePoint2):
- """
- * Create a shape by extrusion of the base shape along a vector, defined by two points.
- * \param theBase Base shape to be extruded.
- * \param thePoint1 First end of extrusion vector.
- * \param thePoint2 Second end of extrusion vector.
- * \return New GEOM_Object, containing the created prism.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakePrismTwoPnt(theBase, thePoint1, thePoint2)
- if PrimOp.IsDone() == 0:
- print "MakePrismTwoPnt : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakePrismTwoPnt", PrimOp)
+ return anObj
+## The same prism but in two directions forward&backward.
+def MakePrism2Ways(theBase, thePoint1, thePoint2):
+ anObj = PrimOp.MakePrismTwoPnt2Ways(theBase, thePoint1, thePoint2)
+ RaiseIfFailed("MakePrismTwoPnt2Ways", PrimOp)
return anObj
+## Create a shape by extrusion of the base shape along the vector,
+# i.e. all the space, transfixed by the base shape during its translation
+# along the vector on the given distance.
+# @param theBase Base shape to be extruded.
+# @param theVec Direction of extrusion.
+# @param theH Prism dimension along theVec.
+# @return New GEOM_Object, containing the created prism.
+#
+# Example: see GEOM_TestAll.py
def MakePrismVecH(theBase, theVec, theH):
- """
- * Create a shape by extrusion of the base shape along the vector,
- * i.e. all the space, transfixed by the base shape during its translation
- * along the vector on the given distance.
- * \param theBase Base shape to be extruded.
- * \param theVec Direction of extrusion.
- * \param theH Prism dimension along theVec.
- * \return New GEOM_Object, containing the created prism.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakePrismVecH(theBase, theVec, theH)
- if PrimOp.IsDone() == 0:
- print "MakePrismVecH : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakePrismVecH", PrimOp)
return anObj
+## Create a shape by extrusion of the base shape along the vector,
+# i.e. all the space, transfixed by the base shape during its translation
+# along the vector on the given distance in 2 Ways (forward/backward) .
+# @param theBase Base shape to be extruded.
+# @param theVec Direction of extrusion.
+# @param theH Prism dimension along theVec in forward direction.
+# @return New GEOM_Object, containing the created prism.
+#
+# Example: see GEOM_TestAll.py
+def MakePrismVecH2Ways(theBase, theVec, theH):
+ anObj = PrimOp.MakePrismVecH2Ways(theBase, theVec, theH)
+ RaiseIfFailed("MakePrismVecH2Ways", PrimOp)
+ return anObj
+
+## Create a shape by extrusion of the base shape along
+# the path shape. The path shape can be a wire or an edge.
+# @param theBase Base shape to be extruded.
+# @param thePath Path shape to extrude the base shape along it.
+# @return New GEOM_Object, containing the created pipe.
+#
+# Example: see GEOM_TestAll.py
def MakePipe(theBase, thePath):
- """
- * Create a shape by extrusion of the base shape along
- * the path shape. The path shape can be a wire or an edge.
- * \param theBase Base shape to be extruded.
- * \param thePath Path shape to extrude the base shape along it.
- * \return New GEOM_Object, containing the created pipe.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakePipe(theBase, thePath)
- if PrimOp.IsDone() == 0:
- print "MakePipe : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakePipe", PrimOp)
return anObj
+## Create a shape by revolution of the base shape around the axis
+# on the given angle, i.e. all the space, transfixed by the base
+# shape during its rotation around the axis on the given angle.
+# @param theBase Base shape to be rotated.
+# @param theAxis Rotation axis.
+# @param theAngle Rotation angle in radians.
+# @return New GEOM_Object, containing the created revolution.
+#
+# Example: see GEOM_TestAll.py
def MakeRevolution(theBase, theAxis, theAngle):
- """
- * Create a shape by revolution of the base shape around the axis
- * on the given angle, i.e. all the space, transfixed by the base
- * shape during its rotation around the axis on the given angle.
- * \param theBase Base shape to be rotated.
- * \param theAxis Rotation axis.
- * \param theAngle Rotation angle in radians.
- * \return New GEOM_Object, containing the created revolution.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeRevolutionAxisAngle(theBase, theAxis, theAngle)
- if PrimOp.IsDone() == 0:
- print "MakeRevolutionAxisAngle : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakeRevolutionAxisAngle", PrimOp)
return anObj
+## The Same Revolution but in both ways forward&backward.
+def MakeRevolution2Ways(theBase, theAxis, theAngle):
+ anObj = PrimOp.MakeRevolutionAxisAngle2Ways(theBase, theAxis, theAngle)
+ RaiseIfFailed("MakeRevolutionAxisAngle2Ways", PrimOp)
+ return anObj
+
+## Create a shell or solid passing through set of sections.Sections should be wires,edges or vertices.
+# @param theSeqSections - set of specified sections.
+# @param theModeSolid - mode defining building solid or shell
+# @param thePreci - precision 3D used for smoothing by default 1.e-6
+# @param theRuled - mode defining type of the result surfaces (ruled or smoothed).
+# @return New GEOM_Object, containing the created shell or solid.
+#
+# Example: see GEOM_TestAll.py
+def MakeThruSections(theSeqSections,theModeSolid,thePreci,theRuled):
+ anObj = PrimOp.MakeThruSections(theSeqSections,theModeSolid,thePreci,theRuled)
+ RaiseIfFailed("MakeThruSections", PrimOp)
+ return anObj
+
+## Create a shape by extrusion of the profile shape along
+# the path shape. The path shape can be a wire or an edge.
+# the several profiles can be specified in the several locations of path.
+# @param theSeqBases - list of Bases shape to be extruded.
+# @param theLocations - list of locations on the path corresponding
+# specified list of the Bases shapes. Number of locations
+# should be equal to number of bases or list of locations can be empty.
+# @param thePath - Path shape to extrude the base shape along it.
+# @param theWithContact - the mode defining that the section is translated to be in
+# contact with the spine.
+# @param - WithCorrection - defining that the section is rotated to be
+# orthogonal to the spine tangent in the correspondent point
+# @return New GEOM_Object, containing the created pipe.
+#
+def MakePipeWithDifferentSections(theSeqBases, theLocations,thePath,theWithContact,theWithCorrection):
+ anObj = PrimOp.MakePipeWithDifferentSections(theSeqBases, theLocations,thePath,theWithContact,theWithCorrection)
+ RaiseIfFailed("MakePipeWithDifferentSections", PrimOp)
+ return anObj
+
+## Create a shape by extrusion of the profile shape along
+# the path shape. The path shape can be a shell or a face.
+# the several profiles can be specified in the several locations of path.
+# @param theSeqBases - list of Bases shape to be extruded.
+# @param theSeqSubBases - list of corresponding subshapes of section shapes.
+# @param theLocations - list of locations on the path corresponding
+# specified list of the Bases shapes. Number of locations
+# should be equal to number of bases. First and last
+# locations must be coincided with first and last vertexes
+# of path correspondingly.
+# @param thePath - Path shape to extrude the base shape along it.
+# @param theWithContact - the mode defining that the section is translated to be in
+# contact with the spine.
+# @param - WithCorrection - defining that the section is rotated to be
+# orthogonal to the spine tangent in the correspondent point
+# @return New GEOM_Object, containing the created solids.
+#
+def MakePipeWithShellSections(theSeqBases, theSeqSubBases,
+ theLocations, thePath,
+ theWithContact, theWithCorrection):
+ anObj = PrimOp.MakePipeWithShellSections(theSeqBases, theSeqSubBases,
+ theLocations, thePath,
+ theWithContact, theWithCorrection)
+ RaiseIfFailed("MakePipeWithShellSections", PrimOp)
+ return anObj
+
+def MakePipeWithShellSectionsBySteps(theSeqBases, theSeqSubBases,
+ theLocations, thePath,
+ theWithContact, theWithCorrection):
+ res = []
+ nbsect = len(theSeqBases)
+ nbsubsect = len(theSeqSubBases)
+ #print "nbsect = ",nbsect
+ for i in range(1,nbsect):
+ #print " i = ",i
+ tmpSeqBases = [ theSeqBases[i-1], theSeqBases[i] ]
+ tmpLocations = [ theLocations[i-1], theLocations[i] ]
+ tmpSeqSubBases = []
+ if nbsubsect>0: tmpSeqSubBases = [ theSeqSubBases[i-1], theSeqSubBases[i] ]
+ anObj = PrimOp.MakePipeWithShellSections(tmpSeqBases, tmpSeqSubBases,
+ tmpLocations, thePath,
+ theWithContact, theWithCorrection)
+ if PrimOp.IsDone() == 0:
+ print "Problems with pipe creation between ",i," and ",i+1," sections"
+ RaiseIfFailed("MakePipeWithShellSections", PrimOp)
+ break
+ else:
+ print "Pipe between ",i," and ",i+1," sections is OK"
+ res.append(anObj)
+ pass
+ pass
+
+ resc = MakeCompound(res)
+ #resc = MakeSewing(res, 0.001)
+ #print "resc: ",resc
+ return resc
+
+
+## Create solids between given sections
+# @param theSeqBases - list of sections (shell or face).
+# @param theLocations - list of corresponding vertexes
+# @return New GEOM_Object, containing the created solids.
+#
+def MakePipeShellsWithoutPath(theSeqBases, theLocations):
+ anObj = PrimOp.MakePipeShellsWithoutPath(theSeqBases, theLocations)
+ RaiseIfFailed("MakePipeShellsWithoutPath", PrimOp)
+ return anObj
+
# -----------------------------------------------------------------------------
# Create base shapes
# -----------------------------------------------------------------------------
+## Create a linear edge with specified ends.
+# @param thePnt1 Point for the first end of edge.
+# @param thePnt2 Point for the second end of edge.
+# @return New GEOM_Object, containing the created edge.
+#
+# Example: see GEOM_TestAll.py
def MakeEdge(thePnt1, thePnt2):
- """
- * Create a linear edge with specified ends.
- * \param thePnt1 Point for the first end of edge.
- * \param thePnt2 Point for the second end of edge.
- * \return New GEOM_Object, containing the created edge.
-
- * Example: see GEOM_TestAll.py
- """
anObj = ShapesOp.MakeEdge(thePnt1, thePnt2)
- if ShapesOp.IsDone() == 0:
- print "MakeEdge : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("MakeEdge", ShapesOp)
return anObj
+## Create a wire from the set of edges and wires.
+# @param theEdgesAndWires List of edges and/or wires.
+# @return New GEOM_Object, containing the created wire.
+#
+# Example: see GEOM_TestAll.py
def MakeWire(theEdgesAndWires):
- """
- * Create a wire from the set of edges and wires.
- * \param theEdgesAndWires List of edges and/or wires.
- * \return New GEOM_Object, containing the created wire.
-
- * Example: see GEOM_TestAll.py
- """
anObj = ShapesOp.MakeWire(theEdgesAndWires)
- if ShapesOp.IsDone() == 0:
- print "MakeWire : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("MakeWire", ShapesOp)
return anObj
+## Create a face on the given wire.
+# @param theWire closed Wire or Edge to build the face on.
+# @param isPlanarWanted If TRUE, only planar face will be built.
+# If impossible, NULL object will be returned.
+# @return New GEOM_Object, containing the created face.
+#
+# Example: see GEOM_TestAll.py
def MakeFace(theWire, isPlanarWanted):
- """
- * Create a face on the given wire.
- * \param theWire Wire to build the face on.
- * \param isPlanarWanted If TRUE, only planar face will be built.
- * If impossible, NULL object will be returned.
- * \return New GEOM_Object, containing the created face.
-
- * Example: see GEOM_TestAll.py
- """
anObj = ShapesOp.MakeFace(theWire, isPlanarWanted)
- if ShapesOp.IsDone() == 0:
- print "MakeFace : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("MakeFace", ShapesOp)
return anObj
+## Create a face on the given wires set.
+# @param theWires List of closed wires or edges to build the face on.
+# @param isPlanarWanted If TRUE, only planar face will be built.
+# If impossible, NULL object will be returned.
+# @return New GEOM_Object, containing the created face.
+#
+# Example: see GEOM_TestAll.py
def MakeFaceWires(theWires, isPlanarWanted):
- """
- * Create a face on the given wires set.
- * \param theWires List of wires to build the face on.
- * \param isPlanarWanted If TRUE, only planar face will be built.
- * If impossible, NULL object will be returned.
- * \return New GEOM_Object, containing the created face.
-
- * Example: see GEOM_TestAll.py
- """
anObj = ShapesOp.MakeFaceWires(theWires, isPlanarWanted)
- if ShapesOp.IsDone() == 0:
- print "MakeFaceWires : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("MakeFaceWires", ShapesOp)
return anObj
+## Shortcut to MakeFaceWires()
+#
+# Example: see GEOM_TestOthers.py
def MakeFaces(theWires, isPlanarWanted):
- """
- * Shortcut to MakeFaceWires()
-
- * Example: see GEOM_TestOthers.py
- """
anObj = MakeFaceWires(theWires, isPlanarWanted)
return anObj
+## Create a shell from the set of faces and shells.
+# @param theFacesAndShells List of faces and/or shells.
+# @return New GEOM_Object, containing the created shell.
+#
+# Example: see GEOM_TestAll.py
def MakeShell(theFacesAndShells):
- """
- * Create a shell from the set of faces and shells.
- * \param theFacesAndShells List of faces and/or shells.
- * \return New GEOM_Object, containing the created shell.
-
- * Example: see GEOM_TestAll.py
- """
anObj = ShapesOp.MakeShell(theFacesAndShells)
- if ShapesOp.IsDone() == 0:
- print "MakeShell : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("MakeShell", ShapesOp)
return anObj
+## Create a solid, bounded by the given shells.
+# @param theShells Sequence of bounding shells.
+# @return New GEOM_Object, containing the created solid.
+#
+# Example: see GEOM_TestAll.py
def MakeSolid(theShells):
- """
- * Create a solid, bounded by the given shells.
- * \param theShells Sequence of bounding shells.
- * \return New GEOM_Object, containing the created solid.
-
- * Example: see GEOM_TestAll.py
- """
anObj = ShapesOp.MakeSolidShells(theShells)
- if ShapesOp.IsDone() == 0:
- print "MakeSolid : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("MakeSolidShells", ShapesOp)
return anObj
+## Create a compound of the given shapes.
+# @param theShapes List of shapes to put in compound.
+# @return New GEOM_Object, containing the created compound.
+#
+# Example: see GEOM_TestAll.py
def MakeCompound(theShapes):
- """
- * Create a compound of the given shapes.
- * \param theShapes List of shapes to put in compound.
- * \return New GEOM_Object, containing the created compound.
-
- * Example: see GEOM_TestAll.py
- """
anObj = ShapesOp.MakeCompound(theShapes)
- if ShapesOp.IsDone() == 0:
- print "MakeCompound : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("MakeCompound", ShapesOp)
return anObj
+## Gives quantity of faces in the given shape.
+# @param theShape Shape to count faces of.
+# @return Quantity of faces.
+#
+# Example: see GEOM_TestOthers.py
def NumberOfFaces(theShape):
- """
- * Gives quantity of faces in the given shape.
- * \param theShape Shape to count faces of.
- * \return Quantity of faces.
-
- * Example: see GEOM_TestOthers.py
- """
nb_faces = ShapesOp.NumberOfFaces(theShape)
- if ShapesOp.IsDone() == 0:
- print "NumberOfFaces : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("NumberOfFaces", ShapesOp)
return nb_faces
+## Gives quantity of edges in the given shape.
+# @param theShape Shape to count edges of.
+# @return Quantity of edges.
+#
+# Example: see GEOM_TestOthers.py
def NumberOfEdges(theShape):
- """
- * Gives quantity of edges in the given shape.
- * \param theShape Shape to count edges of.
- * \return Quantity of edges.
-
- * Example: see GEOM_TestOthers.py
- """
nb_edges = ShapesOp.NumberOfEdges(theShape)
- if ShapesOp.IsDone() == 0:
- print "NumberOfEdges : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("NumberOfEdges", ShapesOp)
return nb_edges
+## Reverses an orientation the given shape.
+# @param theShape Shape to be reversed.
+# @return The reversed copy of theShape.
+#
+# Example: see GEOM_TestAll.py
def ChangeOrientation(theShape):
- """
- * Reverses an orientation the given shape.
- * \param theShape Shape to be reversed.
- * \return The reversed copy of theShape.
-
- * Example: see GEOM_TestAll.py
- """
anObj = ShapesOp.ChangeOrientation(theShape)
- if ShapesOp.IsDone() == 0:
- print "ChangeOrientation : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("ChangeOrientation", ShapesOp)
return anObj
+## Shortcut to ChangeOrientation()
+#
+# Example: see GEOM_TestOthers.py
def OrientationChange(theShape):
- """
- * Shortcut to ChangeOrientation()
-
- * Example: see GEOM_TestOthers.py
- """
anObj = ChangeOrientation(theShape)
return anObj
+## Retrieve all free faces from the given shape.
+# Free face is a face, which is not shared between two shells of the shape.
+# @param theShape Shape to find free faces in.
+# @return List of IDs of all free faces, contained in theShape.
+#
+# Example: see GEOM_TestOthers.py
def GetFreeFacesIDs(theShape):
- """
- * Retrieve all free faces from the given shape.
- * Free face is a face, which is not shared between two shells of the shape.
- * \param theShape Shape to find free faces in.
- * \return List of IDs of all free faces, contained in theShape.
-
- * Example: see GEOM_TestOthers.py
- """
anIDs = ShapesOp.GetFreeFacesIDs(theShape)
- if ShapesOp.IsDone() == 0:
- print "GetFreeFacesIDs : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("GetFreeFacesIDs", ShapesOp)
return anIDs
+## Get all sub-shapes of theShape1 of the given type, shared with theShape2.
+# @param theShape1 Shape to find sub-shapes in.
+# @param theShape2 Shape to find shared sub-shapes with.
+# @param theShapeType Type of sub-shapes to be retrieved.
+# @return List of sub-shapes of theShape1, shared with theShape2.
+#
+# Example: see GEOM_TestOthers.py
def GetSharedShapes(theShape1, theShape2, theShapeType):
- """
- * Get all sub-shapes of theShape1 of the given type, shared with theShape2.
- * \param theShape1 Shape to find sub-shapes in.
- * \param theShape2 Shape to find shared sub-shapes with.
- * \param theShapeType Type of sub-shapes to be retrieved.
- * \return List of sub-shapes of theShape1, shared with theShape2.
-
- * Example: see GEOM_TestOthers.py
- """
aList = ShapesOp.GetSharedShapes(theShape1, theShape2, theShapeType)
- if ShapesOp.IsDone() == 0:
- print "GetSharedShapes : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("GetSharedShapes", ShapesOp)
return aList
+## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+# the specified plane by the certain way, defined through \a theState parameter.
+# @param theShape Shape to find sub-shapes of.
+# @param theShapeType Type of sub-shapes to be retrieved.
+# @param theAx1 Vector (or line, or linear edge), specifying normal
+# direction and location of the plane to find shapes on.
+# @param theState The state of the subshapes to find. It can be one of
+# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+# @return List of all found sub-shapes.
+#
+# Example: see GEOM_TestOthers.py
def GetShapesOnPlane(theShape, theShapeType, theAx1, theState):
- """
- * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
- * the specified plane by the certain way, defined through \a theState parameter.
- * \param theShape Shape to find sub-shapes of.
- * \param theShapeType Type of sub-shapes to be retrieved.
- * \param theAx1 Vector (or line, or linear edge), specifying normal
- * direction and location of the plane to find shapes on.
- * \param theState The state of the subshapes to find. It can be one of
- * ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
- * \return List of all found sub-shapes.
-
- * Example: see GEOM_TestOthers.py
- """
aList = ShapesOp.GetShapesOnPlane(theShape, theShapeType, theAx1, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnPlane : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("GetShapesOnPlane", ShapesOp)
+ return aList
+
+## Works like the above method, but returns list of sub-shapes indices
+#
+# Example: see GEOM_TestOthers.py
+def GetShapesOnPlaneIDs(theShape, theShapeType, theAx1, theState):
+ aList = ShapesOp.GetShapesOnPlaneIDs(theShape, theShapeType, theAx1, theState)
+ RaiseIfFailed("GetShapesOnPlaneIDs", ShapesOp)
+ return aList
+
+## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+# the specified plane by the certain way, defined through \a theState parameter.
+# @param theShape Shape to find sub-shapes of.
+# @param theShapeType Type of sub-shapes to be retrieved.
+# @param theAx1 Vector (or line, or linear edge), specifying normal
+# direction of the plane to find shapes on.
+# @param thePnt Point specifying location of the plane to find shapes on.
+# @param theState The state of the subshapes to find. It can be one of
+# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+# @return List of all found sub-shapes.
+#
+# Example: see GEOM_TestOthers.py
+def GetShapesOnPlaneWithLocation(theShape, theShapeType, theAx1, thePnt, theState):
+ aList = ShapesOp.GetShapesOnPlaneWithLocation(theShape, theShapeType, theAx1, thePnt, theState)
+ RaiseIfFailed("GetShapesOnPlaneWithLocation", ShapesOp)
+ return aList
+
+## Works like the above method, but returns list of sub-shapes indices
+#
+# Example: see GEOM_TestOthers.py
+def GetShapesOnPlaneWithLocationIDs(theShape, theShapeType, theAx1, thePnt, theState):
+ aList = ShapesOp.GetShapesOnPlaneWithLocationIDs(theShape, theShapeType, theAx1, thePnt, theState)
+ RaiseIfFailed("GetShapesOnPlaneWithLocationIDs", ShapesOp)
return aList
+## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+# the specified cylinder by the certain way, defined through \a theState parameter.
+# @param theShape Shape to find sub-shapes of.
+# @param theShapeType Type of sub-shapes to be retrieved.
+# @param theAxis Vector (or line, or linear edge), specifying
+# axis of the cylinder to find shapes on.
+# @param theRadius Radius of the cylinder to find shapes on.
+# @param theState The state of the subshapes to find. It can be one of
+# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+# @return List of all found sub-shapes.
+#
+# Example: see GEOM_TestOthers.py
def GetShapesOnCylinder(theShape, theShapeType, theAxis, theRadius, theState):
- """
- * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
- * the specified cylinder by the certain way, defined through \a theState parameter.
- * \param theShape Shape to find sub-shapes of.
- * \param theShapeType Type of sub-shapes to be retrieved.
- * \param theAxis Vector (or line, or linear edge), specifying
- * axis of the cylinder to find shapes on.
- * \param theRadius Radius of the cylinder to find shapes on.
- * \param theState The state of the subshapes to find. It can be one of
- * ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
- * \return List of all found sub-shapes.
-
- * Example: see GEOM_TestOthers.py
- """
aList = ShapesOp.GetShapesOnCylinder(theShape, theShapeType, theAxis, theRadius, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnCylinder : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("GetShapesOnCylinder", ShapesOp)
+ return aList
+
+## Works like the above method, but returns list of sub-shapes indices
+#
+# Example: see GEOM_TestOthers.py
+def GetShapesOnCylinderIDs(theShape, theShapeType, theAxis, theRadius, theState):
+ aList = ShapesOp.GetShapesOnCylinderIDs(theShape, theShapeType, theAxis, theRadius, theState)
+ RaiseIfFailed("GetShapesOnCylinderIDs", ShapesOp)
return aList
+## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+# the specified sphere by the certain way, defined through \a theState parameter.
+# @param theShape Shape to find sub-shapes of.
+# @param theShapeType Type of sub-shapes to be retrieved.
+# @param theCenter Point, specifying center of the sphere to find shapes on.
+# @param theRadius Radius of the sphere to find shapes on.
+# @param theState The state of the subshapes to find. It can be one of
+# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+# @return List of all found sub-shapes.
+#
+# Example: see GEOM_TestOthers.py
def GetShapesOnSphere(theShape, theShapeType, theCenter, theRadius, theState):
- """
- * Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
- * the specified sphere by the certain way, defined through \a theState parameter.
- * \param theShape Shape to find sub-shapes of.
- * \param theShapeType Type of sub-shapes to be retrieved.
- * \param theCenter Point, specifying center of the sphere to find shapes on.
- * \param theRadius Radius of the sphere to find shapes on.
- * \param theState The state of the subshapes to find. It can be one of
- * ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
- * \return List of all found sub-shapes.
-
- * Example: see GEOM_TestOthers.py
- """
aList = ShapesOp.GetShapesOnSphere(theShape, theShapeType, theCenter, theRadius, theState)
- if ShapesOp.IsDone() == 0:
- print "GetShapesOnSphere : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("GetShapesOnSphere", ShapesOp)
+ return aList
+
+## Works like the above method, but returns list of sub-shapes indices
+#
+# Example: see GEOM_TestOthers.py
+def GetShapesOnSphereIDs(theShape, theShapeType, theCenter, theRadius, theState):
+ aList = ShapesOp.GetShapesOnSphereIDs(theShape, theShapeType, theCenter, theRadius, theState)
+ RaiseIfFailed("GetShapesOnSphereIDs", ShapesOp)
+ return aList
+
+## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+# the specified quadrangle by the certain way, defined through \a theState parameter.
+# @param theShape Shape to find sub-shapes of.
+# @param theShapeType Type of sub-shapes to be retrieved.
+# @param theTopLeftPoint Point, specifying top left corner of a quadrangle
+# @param theTopRigthPoint Point, specifying top right corner of a quadrangle
+# @param theBottomLeftPoint Point, specifying bottom left corner of a quadrangle
+# @param theBottomRigthPoint Point, specifying bottom right corner of a quadrangle
+# @param theState The state of the subshapes to find. It can be one of
+# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+# @return List of all found sub-shapes.
+#
+# Example: see GEOM_TestOthers.py
+def GetShapesOnQuadrangle(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState):
+ aList = ShapesOp.GetShapesOnQuadrangle(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState)
+ RaiseIfFailed("GetShapesOnQuadrangle", ShapesOp)
return aList
+## Works like the above method, but returns list of sub-shapes indices
+#
+# Example: see GEOM_TestOthers.py
+def GetShapesOnQuadrangleIDs(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState):
+ aList = ShapesOp.GetShapesOnQuadrangleIDs(theShape, theShapeType, theTopLeftPoint, theTopRigthPoint, theBottomLeftPoint, theBottomRigthPoint, theState)
+ RaiseIfFailed("GetShapesOnQuadrangleIDs", ShapesOp)
+ return aList
+
+## Find in \a theShape all sub-shapes of type \a theShapeType, situated relatively
+# the specified \a theBox by the certain way, defined through \a theState parameter.
+# @param theBox Shape for relative comparing.
+# @param theShape Shape to find sub-shapes of.
+# @param theShapeType Type of sub-shapes to be retrieved.
+# @param theState The state of the subshapes to find. It can be one of
+# ST_ON, ST_OUT, ST_ONOUT, ST_IN, ST_ONIN.
+# @return List of all found sub-shapes.
+#
+def GetShapesOnBox(theBox, theShape, theShapeType, theState):
+ aList = ShapesOp.GetShapesOnBox(theBox, theShape, theShapeType, theState)
+ RaiseIfFailed("GetShapesOnBox", ShapesOp)
+ return aList
+
+## Works like the above method, but returns list of sub-shapes indices
+#
+def GetShapesOnBoxIDs(theBox, theShape, theShapeType, theState):
+ aList = ShapesOp.GetShapesOnBoxIDs(theBox, theShape, theShapeType, theState)
+ RaiseIfFailed("GetShapesOnBoxIDs", ShapesOp)
+ return aList
+
+## Get sub-shape(s) of theShapeWhere, which are
+# coincident with \a theShapeWhat or could be a part of it.
+# @param theShapeWhere Shape to find sub-shapes of.
+# @param theShapeWhat Shape, specifying what to find (must be in the
+# building history of the ShapeWhere).
+# @return Group of all found sub-shapes or a single found sub-shape.
+#
+# Example: see GEOM_TestOthers.py
def GetInPlace(theShapeWhere, theShapeWhat):
- """
- * Get sub-shape(s) of theShapeWhere, which are
- * coincident with \a theShapeWhat or could be a part of it.
- * \param theShapeWhere Shape to find sub-shapes of.
- * \param theShapeWhat Shape, specifying what to find.
- * \return Group of all found sub-shapes or a single found sub-shape.
-
- * Example: see GEOM_TestOthers.py
- """
anObj = ShapesOp.GetInPlace(theShapeWhere, theShapeWhat)
- if ShapesOp.IsDone() == 0:
- print "GetInPlace : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("GetInPlace", ShapesOp)
+ return anObj
+
+## Get sub-shape(s) of \a theShapeWhere, which are
+# coincident with \a theShapeWhat or could be a part of it.
+#
+# Implementation of this method is based on a saved history of an operation,
+# produced \a theShapeWhere. The \a theShapeWhat must be among this operation's
+# arguments (an argument shape or a sub-shape of an argument shape).
+# The operation could be the Partition or one of boolean operations,
+# performed on simple shapes (not on compounds).
+#
+# @param theShapeWhere Shape to find sub-shapes of.
+# @param theShapeWhat Shape, specifying what to find (must be in the
+# building history of the ShapeWhere).
+# @return Group of all found sub-shapes or a single found sub-shape.
+#
+# Example: see GEOM_TestOthers.py
+def GetInPlaceByHistory(theShapeWhere, theShapeWhat):
+ anObj = ShapesOp.GetInPlaceByHistory(theShapeWhere, theShapeWhat)
+ RaiseIfFailed("GetInPlaceByHistory", ShapesOp)
+ return anObj
+
+## Get sub-shape of theShapeWhere, which is
+# equal to \a theShapeWhat.
+# @param theShapeWhere Shape to find sub-shape of.
+# @param theShapeWhat Shape, specifying what to find
+# (must be usual shape).
+# @return New GEOM_Object for found sub-shape.
+#
+def GetSame(theShapeWhere, theShapeWhat):
+ anObj = ShapesOp.GetSame(theShapeWhere, theShapeWhat)
+ RaiseIfFailed("GetSame", ShapesOp)
return anObj
# -----------------------------------------------------------------------------
# Access to sub-shapes by their unique IDs inside the main shape.
# -----------------------------------------------------------------------------
+## Obtain a composite sub-shape of <aShape>, composed from sub-shapes
+# of <aShape>, selected by their unique IDs inside <aShape>
+#
+# Example: see GEOM_TestAll.py
def GetSubShape(aShape, ListOfID):
- """
- * Obtain a composite sub-shape of <aShape>, composed from sub-shapes
- * of <aShape>, selected by their unique IDs inside <aShape>
-
- * Example: see GEOM_TestAll.py
- """
anObj = geom.AddSubShape(aShape,ListOfID)
return anObj
+## Obtain unique ID of sub-shape <aSubShape> inside <aShape>
+#
+# Example: see GEOM_TestAll.py
def GetSubShapeID(aShape, aSubShape):
- """
- * Obtain unique ID of sub-shape <aSubShape> inside <aShape>
-
- * Example: see GEOM_TestAll.py
- """
anID = LocalOp.GetSubShapeIndex(aShape, aSubShape)
- if LocalOp.IsDone() == 0:
- print "GetSubShapeIndex : ", LocalOp.GetErrorCode()
+ RaiseIfFailed("GetSubShapeIndex", LocalOp)
return anID
# -----------------------------------------------------------------------------
# Decompose objects
# -----------------------------------------------------------------------------
+## Explode a shape on subshapes of a given type.
+# @param theShape Shape to be exploded.
+# @param theShapeType Type of sub-shapes to be retrieved.
+# @return List of sub-shapes of type theShapeType, contained in theShape.
+#
+# Example: see GEOM_TestAll.py
def SubShapeAll(aShape, aType):
- """
- * Explode a shape on subshapes of a given type.
- * \param theShape Shape to be exploded.
- * \param theShapeType Type of sub-shapes to be retrieved.
- * \return List of sub-shapes of type theShapeType, contained in theShape.
-
- * Example: see GEOM_TestAll.py
- """
ListObj = ShapesOp.MakeExplode(aShape,aType,0)
- if ShapesOp.IsDone() == 0:
- print "MakeExplode : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("MakeExplode", ShapesOp)
return ListObj
+## Explode a shape on subshapes of a given type.
+# @param theShape Shape to be exploded.
+# @param theShapeType Type of sub-shapes to be retrieved.
+# @return List of IDs of sub-shapes.
def SubShapeAllIDs(aShape, aType):
- """
- * Explode a shape on subshapes of a given type.
- * \param theShape Shape to be exploded.
- * \param theShapeType Type of sub-shapes to be retrieved.
- * \return List of IDs of sub-shapes.
- """
ListObj = ShapesOp.SubShapeAllIDs(aShape,aType,0)
- if ShapesOp.IsDone() == 0:
- print "SubShapeAllIDs : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("SubShapeAllIDs", ShapesOp)
return ListObj
+## Explode a shape on subshapes of a given type.
+# Sub-shapes will be sorted by coordinates of their gravity centers.
+# @param theShape Shape to be exploded.
+# @param theShapeType Type of sub-shapes to be retrieved.
+# @return List of sub-shapes of type theShapeType, contained in theShape.
+#
+# Example: see GEOM_TestAll.py
def SubShapeAllSorted(aShape, aType):
- """
- * Explode a shape on subshapes of a given type.
- * Sub-shapes will be sorted by coordinates of their gravity centers.
- * \param theShape Shape to be exploded.
- * \param theShapeType Type of sub-shapes to be retrieved.
- * \return List of sub-shapes of type theShapeType, contained in theShape.
-
- * Example: see GEOM_TestAll.py
- """
ListObj = ShapesOp.MakeExplode(aShape,aType,1)
- if ShapesOp.IsDone() == 0:
- print "MakeExplode : ", ShapesOp.GetErrorCode()
+ RaiseIfFailed("MakeExplode", ShapesOp)
return ListObj
+## Explode a shape on subshapes of a given type.
+# Sub-shapes will be sorted by coordinates of their gravity centers.
+# @param theShape Shape to be exploded.
+# @param theShapeType Type of sub-shapes to be retrieved.
+# @return List of IDs of sub-shapes.
def SubShapeAllSortedIDs(aShape, aType):
- """
- * Explode a shape on subshapes of a given type.
- * Sub-shapes will be sorted by coordinates of their gravity centers.
- * \param theShape Shape to be exploded.
- * \param theShapeType Type of sub-shapes to be retrieved.
- * \return List of IDs of sub-shapes.
- """
ListIDs = ShapesOp.SubShapeAllIDs(aShape,aType,1)
- if ShapesOp.IsDone() == 0:
- print "SubShapeAllSortedIDs : ", ShapesOp.GetErrorCode()
- return ListObj
+ RaiseIfFailed("SubShapeAllIDs", ShapesOp)
+ return ListIDs
+## Obtain a compound of sub-shapes of <aShape>,
+# selected by they indices in list of all sub-shapes of type <aType>.
+# Each index is in range [1, Nb_Sub-Shapes_Of_Given_Type]
+#
+# Example: see GEOM_TestAll.py
def SubShape(aShape, aType, ListOfInd):
- """
- * Obtain a compound of sub-shapes of <aShape>,
- * selected by they indices in list of all sub-shapes of type <aType>.
- * Each index is in range [1, Nb_Sub-Shapes_Of_Given_Type]
-
- * Example: see GEOM_TestAll.py
- """
ListOfIDs = []
AllShapeList = SubShapeAll(aShape, aType)
for ind in ListOfInd:
anObj = GetSubShape(aShape, ListOfIDs)
return anObj
+## Obtain a compound of sub-shapes of <aShape>,
+# selected by they indices in sorted list of all sub-shapes of type <aType>.
+# Each index is in range [1, Nb_Sub-Shapes_Of_Given_Type]
+#
+# Example: see GEOM_TestAll.py
def SubShapeSorted(aShape, aType, ListOfInd):
- """
- * Obtain a compound of sub-shapes of <aShape>,
- * selected by they indices in sorted list of all sub-shapes of type <aType>.
- * Each index is in range [1, Nb_Sub-Shapes_Of_Given_Type]
-
- * Example: see GEOM_TestAll.py
- """
ListOfIDs = []
AllShapeList = SubShapeAllSorted(aShape, aType)
for ind in ListOfInd:
# Healing operations
# -----------------------------------------------------------------------------
+## Apply a sequence of Shape Healing operators to the given object.
+# @param theShape Shape to be processed.
+# @param theOperators List of names of operators ("FixShape", "SplitClosedFaces", etc.).
+# @param theParameters List of names of parameters
+# ("FixShape.Tolerance3d", "SplitClosedFaces.NbSplitPoints", etc.).
+# @param theValues List of values of parameters, in the same order
+# as parameters are listed in \a theParameters list.
+# @return New GEOM_Object, containing processed shape.
+#
+# Example: see GEOM_TestHealing.py
def ProcessShape(theShape, theOperators, theParameters, theValues):
- """
- * Apply a sequence of Shape Healing operators to the given object.
- * \param theShape Shape to be processed.
- * \param theOperators List of names of operators ("FixShape", "SplitClosedFaces", etc.).
- * \param theParameters List of names of parameters
- * ("FixShape.Tolerance3d", "SplitClosedFaces.NbSplitPoints", etc.).
- * \param theValues List of values of parameters, in the same order
- * as parameters are listed in \a theParameters list.
- * \return New GEOM_Object, containing processed shape.
-
- * Example: see GEOM_TestHealing.py
- """
anObj = HealOp.ProcessShape(theShape, theOperators, theParameters, theValues)
- if HealOp.IsDone() == 0:
- print "ProcessShape : ", HealOp.GetErrorCode()
+ RaiseIfFailed("ProcessShape", HealOp)
return anObj
+## Remove faces from the given object (shape).
+# @param theObject Shape to be processed.
+# @param theFaces Indices of faces to be removed, if EMPTY then the method
+# removes ALL faces of the given object.
+# @return New GEOM_Object, containing processed shape.
+#
+# Example: see GEOM_TestHealing.py
def SuppressFaces(theObject, theFaces):
- """
- * Remove faces from the given object (shape).
- * \param theObject Shape to be processed.
- * \param theFaces Indices of faces to be removed, if EMPTY then the method
- * removes ALL faces of the given object.
- * \return New GEOM_Object, containing processed shape.
-
- * Example: see GEOM_TestHealing.py
- """
anObj = HealOp.SuppressFaces(theObject, theFaces)
- if HealOp.IsDone() == 0:
- print "SuppressFaces : ", HealOp.GetErrorCode()
+ RaiseIfFailed("SuppressFaces", HealOp)
return anObj
+## Sewing of some shapes into single shape.
+#
+# Example: see GEOM_TestHealing.py
def MakeSewing(ListShape, theTolerance):
- """
- * Sewing of some shapes into single shape.
-
- * Example: see GEOM_TestHealing.py
- """
comp = MakeCompound(ListShape)
anObj = Sew(comp, theTolerance)
return anObj
+## Sewing of the given object.
+# @param theObject Shape to be processed.
+# @param theTolerance Required tolerance value.
+# @return New GEOM_Object, containing processed shape.
+#
+# Example: see MakeSewing() above
def Sew(theObject, theTolerance):
- """
- * Sewing of the given object.
- * \param theObject Shape to be processed.
- * \param theTolerance Required tolerance value.
- * \return New GEOM_Object, containing processed shape.
-
- * Example: see MakeSewing() above
- """
anObj = HealOp.Sew(theObject, theTolerance)
- if HealOp.IsDone() == 0:
- print "Sew : ", HealOp.GetErrorCode()
+ RaiseIfFailed("Sew", HealOp)
return anObj
+## Remove internal wires and edges from the given object (face).
+# @param theObject Shape to be processed.
+# @param theWires Indices of wires to be removed, if EMPTY then the method
+# removes ALL internal wires of the given object.
+# @return New GEOM_Object, containing processed shape.
+#
+# Example: see GEOM_TestHealing.py
def SuppressInternalWires(theObject, theWires):
- """
- * Remove internal wires and edges from the given object (face).
- * \param theObject Shape to be processed.
- * \param theWires Indices of wires to be removed, if EMPTY then the method
- * removes ALL internal wires of the given object.
- * \return New GEOM_Object, containing processed shape.
-
- * Example: see GEOM_TestHealing.py
- """
anObj = HealOp.RemoveIntWires(theObject, theWires)
- if HealOp.IsDone() == 0:
- print "SuppressInternalWires : ", HealOp.GetErrorCode()
+ RaiseIfFailed("RemoveIntWires", HealOp)
return anObj
+## Remove internal closed contours (holes) from the given object.
+# @param theObject Shape to be processed.
+# @param theWires Indices of wires to be removed, if EMPTY then the method
+# removes ALL internal holes of the given object
+# @return New GEOM_Object, containing processed shape.
+#
+# Example: see GEOM_TestHealing.py
def SuppressHoles(theObject, theWires):
- """
- * Remove internal closed contours (holes) from the given object.
- * \param theObject Shape to be processed.
- * \param theWires Indices of wires to be removed, if EMPTY then the method
- * removes ALL internal holes of the given object
- * \return New GEOM_Object, containing processed shape.
-
- * Example: see GEOM_TestHealing.py
- """
anObj = HealOp.FillHoles(theObject, theWires)
- if HealOp.IsDone() == 0:
- print "SuppressHoles : ", HealOp.GetErrorCode()
+ RaiseIfFailed("FillHoles", HealOp)
return anObj
+## Close an open wire.
+# @param theObject Shape to be processed.
+# @param theWires Indexes of edge(s) and wire(s) to be closed within <VAR>theObject</VAR>'s shape,
+# if -1, then theObject itself is a wire.
+# @param isCommonVertex If TRUE : closure by creation of a common vertex,
+# If FALS : closure by creation of an edge between ends.
+# @return New GEOM_Object, containing processed shape.
+#
+# Example: see GEOM_TestHealing.py
def CloseContour(theObject, theWires, isCommonVertex):
- """
- * Close an open wire.
- * \param theObject Shape to be processed.
- * \param theWires Indexes of edge(s) and wire(s) to be closed within <VAR>theObject</VAR>'s shape,
- * if -1, then theObject itself is a wire.
- * \param isCommonVertex If TRUE : closure by creation of a common vertex,
- * If FALS : closure by creation of an edge between ends.
- * \return New GEOM_Object, containing processed shape.
-
- * Example: see GEOM_TestHealing.py
- """
anObj = HealOp.CloseContour(theObject, theWires, isCommonVertex)
- if HealOp.IsDone() == 0:
- print "CloseContour : ", HealOp.GetErrorCode()
- return anObj
-
+ RaiseIfFailed("CloseContour", HealOp)
+ return anObj
+
+## Addition of a point to a given edge object.
+# @param theObject Shape to be processed.
+# @param theEdgeIndex Index of edge to be divided within theObject's shape,
+# if -1, then theObject itself is the edge.
+# @param theValue Value of parameter on edge or length parameter,
+# depending on \a isByParameter.
+# @param isByParameter If TRUE : \a theValue is treated as a curve parameter [0..1],
+# if FALSE : \a theValue is treated as a length parameter [0..1]
+# @return New GEOM_Object, containing processed shape.
+#
+# Example: see GEOM_TestHealing.py
def DivideEdge(theObject, theEdgeIndex, theValue, isByParameter):
- """
- * Addition of a point to a given edge object.
- * \param theObject Shape to be processed.
- * \param theEdgeIndex Index of edge to be divided within theObject's shape,
- * if -1, then theObject itself is the edge.
- * \param theValue Value of parameter on edge or length parameter,
- * depending on \a isByParameter.
- * \param isByParameter If TRUE : \a theValue is treated as a curve parameter [0..1],
- * if FALSE : \a theValue is treated as a length parameter [0..1]
- * \return New GEOM_Object, containing processed shape.
-
- * Example: see GEOM_TestHealing.py
- """
anObj = HealOp.DivideEdge(theObject, theEdgeIndex, theValue, isByParameter)
- if HealOp.IsDone() == 0:
- print "DivideEdge : ", HealOp.GetErrorCode()
- return anObj
-
+ RaiseIfFailed("DivideEdge", HealOp)
+ return anObj
+
+## Change orientation of the given object.
+# @param theObject Shape to be processed.
+# @update given shape
+def ChangeOrientationShell(theObject):
+ theObject = HealOp.ChangeOrientation(theObject)
+ RaiseIfFailed("ChangeOrientation", HealOp)
+
+## Change orientation of the given object.
+# @param theObject Shape to be processed.
+# @return New GEOM_Object, containing processed shape.
+def ChangeOrientationShellCopy(theObject):
+ anObj = HealOp.ChangeOrientationCopy(theObject)
+ RaiseIfFailed("ChangeOrientationCopy", HealOp)
+ return anObj
+
+## Get a list of wires (wrapped in GEOM_Object-s),
+# that constitute a free boundary of the given shape.
+# @param theObject Shape to get free boundary of.
+# @return [status, theClosedWires, theOpenWires]
+# status: FALSE, if an error(s) occured during the method execution.
+# theClosedWires: Closed wires on the free boundary of the given shape.
+# theOpenWires: Open wires on the free boundary of the given shape.
+#
+# Example: see GEOM_TestHealing.py
def GetFreeBoundary(theObject):
- """
- * Get a list of wires (wrapped in GEOM_Object-s),
- * that constitute a free boundary of the given shape.
- * \param theObject Shape to get free boundary of.
- * \return [status, theClosedWires, theOpenWires]
- * status: FALSE, if an error(s) occured during the method execution.
- * theClosedWires: Closed wires on the free boundary of the given shape.
- * theOpenWires: Open wires on the free boundary of the given shape.
-
- * Example: see GEOM_TestHealing.py
- """
anObj = HealOp.GetFreeBoundary(theObject)
- if HealOp.IsDone() == 0:
- print "GetFreeBoundaries : ", HealOp.GetErrorCode()
+ RaiseIfFailed("GetFreeBoundary", HealOp)
return anObj
# -----------------------------------------------------------------------------
# Create advanced objects
# -----------------------------------------------------------------------------
+## Create a copy of the given object
+#
+# Example: see GEOM_TestAll.py
def MakeCopy(theOriginal):
- """
- * Create a copy of the given object
-
- * Example: see GEOM_TestAll.py
- """
anObj = InsertOp.MakeCopy(theOriginal)
- if InsertOp.IsDone() == 0:
- print "MakeCopy : ", InsertOp.GetErrorCode()
+ RaiseIfFailed("MakeCopy", InsertOp)
return anObj
+## Create a filling from the given compound of contours.
+# @param theShape the compound of contours
+# @param theMinDeg a minimal degree
+# @param theMaxDeg a maximal degree
+# @param theTol2D a 2d tolerance
+# @param theTol3D a 3d tolerance
+# @param theNbIter a number of iteration
+# @return New GEOM_Object, containing the created filling surface.
+#
+# Example: see GEOM_TestAll.py
def MakeFilling(theShape, theMinDeg, theMaxDeg, theTol2D, theTol3D, theNbIter):
- """
- * Create a filling from the given compound of contours.
- * \param theShape the compound of contours
- * \param theMinDeg a minimal degree
- * \param theMaxDeg a maximal degree
- * \param theTol2D a 2d tolerance
- * \param theTol3D a 3d tolerance
- * \param theNbIter a number of iteration
- * \return New GEOM_Object, containing the created filling surface.
-
- * Example: see GEOM_TestAll.py
- """
anObj = PrimOp.MakeFilling(theShape, theMinDeg, theMaxDeg, theTol2D, theTol3D, theNbIter)
- if PrimOp.IsDone() == 0:
- print "MakeFilling : ", PrimOp.GetErrorCode()
+ RaiseIfFailed("MakeFilling", PrimOp)
+ return anObj
+
+## Replace coincident faces in theShape by one face.
+# @param theShape Initial shape.
+# @param theTolerance Maximum distance between faces, which can be considered as coincident.
+# @param doKeepNonSolids If FALSE, only solids will present in the result, otherwise all initial shapes.
+# @return New GEOM_Object, containing a copy of theShape without coincident faces.
+#
+# Example: see GEOM_Spanner.py
+def MakeGlueFaces(theShape, theTolerance, doKeepNonSolids=True):
+ anObj = ShapesOp.MakeGlueFaces(theShape, theTolerance, doKeepNonSolids)
+ if anObj is None:
+ raise RuntimeError, "MakeGlueFaces : " + ShapesOp.GetErrorCode()
return anObj
-def MakeGlueFaces(theShape, theTolerance):
- """
- * Replace coincident faces in theShape by one face.
- * \param theShape Initial shape.
- * \param theTolerance Maximum distance between faces, which can be considered as coincident.
- * \return New GEOM_Object, containing a copy of theShape without coincident faces.
- * Example: see GEOM_Spanner.py
- """
- anObj = ShapesOp.MakeGlueFaces(theShape, theTolerance)
- if ShapesOp.IsDone() == 0:
- print "MakeGlueFaces : ", ShapesOp.GetErrorCode()
+## Find coincident faces in theShape for possible gluing.
+# @param theShape Initial shape.
+# @param theTolerance Maximum distance between faces,
+# which can be considered as coincident.
+# @return ListOfGO.
+#
+# Example: see GEOM_Spanner.py
+def GetGlueFaces(theShape, theTolerance):
+ anObj = ShapesOp.GetGlueFaces(theShape, theTolerance)
+ RaiseIfFailed("GetGlueFaces", ShapesOp)
+ return anObj
+
+
+## Replace coincident faces in theShape by one face
+# in compliance with given list of faces
+# @param theShape Initial shape.
+# @param theTolerance Maximum distance between faces,
+# which can be considered as coincident.
+# @param theFaces List of faces for gluing.
+# @param doKeepNonSolids If FALSE, only solids will present in the result, otherwise all initial shapes.
+# @return New GEOM_Object, containing a copy of theShape
+# without some faces.
+#
+# Example: see GEOM_Spanner.py
+def MakeGlueFacesByList(theShape, theTolerance, theFaces, doKeepNonSolids=True):
+ anObj = ShapesOp.MakeGlueFacesByList(theShape, theTolerance, theFaces, doKeepNonSolids)
+ if anObj is None:
+ raise RuntimeError, "MakeGlueFacesByList : " + ShapesOp.GetErrorCode()
return anObj
+
# -----------------------------------------------------------------------------
# Boolean (Common, Cut, Fuse, Section)
# -----------------------------------------------------------------------------
+## Perform one of boolean operations on two given shapes.
+# @param theShape1 First argument for boolean operation.
+# @param theShape2 Second argument for boolean operation.
+# @param theOperation Indicates the operation to be done:
+# 1 - Common, 2 - Cut, 3 - Fuse, 4 - Section.
+# @return New GEOM_Object, containing the result shape.
+#
+# Example: see GEOM_TestAll.py
def MakeBoolean(theShape1, theShape2, theOperation):
- """
- * Perform one of boolean operations on two given shapes.
- * \param theShape1 First argument for boolean operation.
- * \param theShape2 Second argument for boolean operation.
- * \param theOperation Indicates the operation to be done:
- * 1 - Common, 2 - Cut, 3 - Fuse, 4 - Section.
- * \return New GEOM_Object, containing the result shape.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BoolOp.MakeBoolean(theShape1, theShape2, theOperation)
- if BoolOp.IsDone() == 0:
- print "MakeBoolean : ", BoolOp.GetErrorCode()
+ RaiseIfFailed("MakeBoolean", BoolOp)
return anObj
+## Shortcut to MakeBoolean(s1, s2, 1)
+#
+# Example: see GEOM_TestOthers.py
def MakeCommon(s1, s2):
- """
- * Shortcut to MakeBoolean(s1, s2, 1)
-
- * Example: see GEOM_TestOthers.py
- """
return MakeBoolean(s1, s2, 1)
+## Shortcut to MakeBoolean(s1, s2, 2)
+#
+# Example: see GEOM_TestOthers.py
def MakeCut(s1, s2):
- """
- * Shortcut to MakeBoolean(s1, s2, 2)
-
- * Example: see GEOM_TestOthers.py
- """
return MakeBoolean(s1, s2, 2)
+## Shortcut to MakeBoolean(s1, s2, 3)
+#
+# Example: see GEOM_TestOthers.py
def MakeFuse(s1, s2):
- """
- * Shortcut to MakeBoolean(s1, s2, 3)
-
- * Example: see GEOM_TestOthers.py
- """
return MakeBoolean(s1, s2, 3)
+## Shortcut to MakeBoolean(s1, s2, 4)
+#
+# Example: see GEOM_TestOthers.py
def MakeSection(s1, s2):
- """
- * Shortcut to MakeBoolean(s1, s2, 4)
-
- * Example: see GEOM_TestOthers.py
- """
return MakeBoolean(s1, s2, 4)
+## Perform partition operation.
+# @param ListShapes Shapes to be intersected.
+# @param ListTools Shapes to intersect theShapes.
+# !!!NOTE: Each compound from ListShapes and ListTools will be exploded
+# in order to avoid possible intersection between shapes from
+# this compound.
+# @param Limit Type of resulting shapes (corresponding to TopAbs_ShapeEnum).
+# @param KeepNonlimitShapes: if this parameter == 0 - only shapes with
+# type <= Limit are kept in the result,
+# else - shapes with type > Limit are kept
+# also (if they exist)
+#
+# After implementation new version of PartitionAlgo (October 2006)
+# other parameters are ignored by current functionality. They are kept
+# in this function only for support old versions.
+# Ignored parameters:
+# @param ListKeepInside Shapes, outside which the results will be deleted.
+# Each shape from theKeepInside must belong to theShapes also.
+# @param ListRemoveInside Shapes, inside which the results will be deleted.
+# Each shape from theRemoveInside must belong to theShapes also.
+# @param RemoveWebs If TRUE, perform Glue 3D algorithm.
+# @param ListMaterials Material indices for each shape. Make sence,
+# only if theRemoveWebs is TRUE.
+#
+# @return New GEOM_Object, containing the result shapes.
+#
+# Example: see GEOM_TestAll.py
def MakePartition(ListShapes, ListTools=[], ListKeepInside=[], ListRemoveInside=[],
- Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[]):
- """
- * Perform partition operation.
- * \param ListShapes Shapes to be intersected.
- * \param ListTools Shapes to intersect theShapes.
- * \param ListKeepInside Shapes, outside which the results will be deleted.
- * Each shape from theKeepInside must belong to theShapes also.
- * \param ListRemoveInside Shapes, inside which the results will be deleted.
- * Each shape from theRemoveInside must belong to theShapes also.
- * \param Limit Type of resulting shapes (corresponding to TopAbs_ShapeEnum).
- * \param RemoveWebs If TRUE, perform Glue 3D algorithm.
- * \param ListMaterials Material indices for each shape. Make sence, only if theRemoveWebs is TRUE.
- * \return New GEOM_Object, containing the result shapes.
-
- * Example: see GEOM_TestAll.py
- """
+ Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[],
+ KeepNonlimitShapes=0):
anObj = BoolOp.MakePartition(ListShapes, ListTools,
ListKeepInside, ListRemoveInside,
- Limit, RemoveWebs, ListMaterials);
- if BoolOp.IsDone() == 0:
- print "MakePartition : ", BoolOp.GetErrorCode()
+ Limit, RemoveWebs, ListMaterials,
+ KeepNonlimitShapes);
+ RaiseIfFailed("MakePartition", BoolOp)
return anObj
+## Perform partition operation.
+# This method may be useful if it is needed to make a partition for
+# compound contains nonintersected shapes. Performance will be better
+# since intersection between shapes from compound is not performed.
+#
+# Description of all parameters as in previous method MakePartition()
+#
+# !!!NOTE: Passed compounds (via ListShapes or via ListTools)
+# have to consist of nonintersecting shapes.
+#
+# @return New GEOM_Object, containing the result shapes.
+#
+def MakePartitionNonSelfIntersectedShape(ListShapes, ListTools=[],
+ ListKeepInside=[], ListRemoveInside=[],
+ Limit=ShapeType["SHAPE"], RemoveWebs=0,
+ ListMaterials=[], KeepNonlimitShapes=0):
+ anObj = BoolOp.MakePartitionNonSelfIntersectedShape(ListShapes, ListTools,
+ ListKeepInside, ListRemoveInside,
+ Limit, RemoveWebs, ListMaterials,
+ KeepNonlimitShapes);
+ RaiseIfFailed("MakePartitionNonSelfIntersectedShape", BoolOp)
+ return anObj
+
+## Shortcut to MakePartition()
+#
+# Example: see GEOM_TestOthers.py
def Partition(ListShapes, ListTools=[], ListKeepInside=[], ListRemoveInside=[],
- Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[]):
- """
- * Shortcut to MakePartition()
-
- * Example: see GEOM_TestOthers.py
- """
+ Limit=ShapeType["SHAPE"], RemoveWebs=0, ListMaterials=[],
+ KeepNonlimitShapes=0):
anObj = MakePartition(ListShapes, ListTools,
ListKeepInside, ListRemoveInside,
- Limit, RemoveWebs, ListMaterials);
+ Limit, RemoveWebs, ListMaterials,
+ KeepNonlimitShapes);
return anObj
+## Perform partition of the Shape with the Plane
+# @param theShape Shape to be intersected.
+# @param thePlane Tool shape, to intersect theShape.
+# @return New GEOM_Object, containing the result shape.
+#
+# Example: see GEOM_TestAll.py
def MakeHalfPartition(theShape, thePlane):
- """
- * Perform partition of the Shape with the Plane
- * \param theShape Shape to be intersected.
- * \param thePlane Tool shape, to intersect theShape.
- * \return New GEOM_Object, containing the result shape.
-
- * Example: see GEOM_TestAll.py
- """
anObj = BoolOp.MakeHalfPartition(theShape, thePlane)
- if BoolOp.IsDone() == 0:
- print "MakeHalfPartition : ", BoolOp.GetErrorCode()
+ RaiseIfFailed("MakeHalfPartition", BoolOp)
return anObj
# -----------------------------------------------------------------------------
# Transform objects
# -----------------------------------------------------------------------------
+## Translate the given object along the vector, specified
+# by its end points, creating its copy before the translation.
+# @param theObject The object to be translated.
+# @param thePoint1 Start point of translation vector.
+# @param thePoint2 End point of translation vector.
+# @return New GEOM_Object, containing the translated object.
+#
+# Example: see GEOM_TestAll.py
def MakeTranslationTwoPoints(theObject, thePoint1, thePoint2):
- """
- * Translate the given object along the vector, specified
- * by its end points, creating its copy before the translation.
- * \param theObject The object to be translated.
- * \param thePoint1 Start point of translation vector.
- * \param thePoint2 End point of translation vector.
- * \return New GEOM_Object, containing the translated object.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.TranslateTwoPointsCopy(theObject, thePoint1, thePoint2)
- if TrsfOp.IsDone() == 0:
- print "TranslateTwoPointsCopy : ", TrsfOp.GetErrorCode()
+ RaiseIfFailed("TranslateTwoPointsCopy", TrsfOp)
return anObj
+## Translate the given object along the vector, specified
+# by its components, creating its copy before the translation.
+# @param theObject The object to be translated.
+# @param theDX,theDY,theDZ Components of translation vector.
+# @return New GEOM_Object, containing the translated object.
+#
+# Example: see GEOM_TestAll.py
def MakeTranslation(theObject, theDX, theDY, theDZ):
- """
- * Translate the given object along the vector, specified
- * by its components, creating its copy before the translation.
- * \param theObject The object to be translated.
- * \param theDX,theDY,theDZ Components of translation vector.
- * \return New GEOM_Object, containing the translated object.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.TranslateDXDYDZCopy(theObject, theDX, theDY, theDZ)
- if TrsfOp.IsDone() == 0:
- print "TranslateDXDYDZCopy : ", TrsfOp.GetErrorCode()
+ RaiseIfFailed("TranslateDXDYDZCopy", TrsfOp)
return anObj
+## Translate the given object along the given vector,
+# creating its copy before the translation.
+# @param theObject The object to be translated.
+# @param theVector The translation vector.
+# @return New GEOM_Object, containing the translated object.
+#
+# Example: see GEOM_TestAll.py
def MakeTranslationVector(theObject, theVector):
- """
- * Translate the given object along the given vector,
- * creating its copy before the translation.
- * \param theObject The object to be translated.
- * \param theVector The translation vector.
- * \return New GEOM_Object, containing the translated object.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.TranslateVectorCopy(theObject, theVector)
- if TrsfOp.IsDone() == 0:
- print "TranslateVectorCopy : ", TrsfOp.GetErrorCode()
+ RaiseIfFailed("TranslateVectorCopy", TrsfOp)
return anObj
+## Rotate the given object around the given axis
+# on the given angle, creating its copy before the rotatation.
+# @param theObject The object to be rotated.
+# @param theAxis Rotation axis.
+# @param theAngle Rotation angle in radians.
+# @return New GEOM_Object, containing the rotated object.
+#
+# Example: see GEOM_TestAll.py
def MakeRotation(theObject, theAxis, theAngle):
- """
- * Rotate the given object around the given axis
- * on the given angle, creating its copy before the rotatation.
- * \param theObject The object to be rotated.
- * \param theAxis Rotation axis.
- * \param theAngle Rotation angle in radians.
- * \return New GEOM_Object, containing the rotated object.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.RotateCopy(theObject, theAxis, theAngle)
- if TrsfOp.IsDone() == 0:
- print "RotateCopy : ", TrsfOp.GetErrorCode()
+ RaiseIfFailed("RotateCopy", TrsfOp)
+ return anObj
+
+## Rotate given object around vector perpendicular to plane
+# containing three points, creating its copy before the rotatation.
+# @param theObject The object to be rotated.
+# @param theCentPoint central point - the axis is the vector perpendicular to the plane
+# containing the three points.
+# @param thePoint1 and thePoint2 - in a perpendicular plan of the axis.
+# @return New GEOM_Object, containing the rotated object.
+#
+# Example: see GEOM_TestAll.py
+def MakeRotationThreePoints(theObject, theCentPoint, thePoint1, thePoint2):
+ anObj = TrsfOp.RotateThreePointsCopy(theObject, theCentPoint, thePoint1, thePoint2)
+ RaiseIfFailed("RotateThreePointsCopy", TrsfOp)
return anObj
+## Scale the given object by the factor, creating its copy before the scaling.
+# @param theObject The object to be scaled.
+# @param thePoint Center point for scaling.
+# @param theFactor Scaling factor value.
+# @return New GEOM_Object, containing the scaled shape.
+#
+# Example: see GEOM_TestAll.py
def MakeScaleTransform(theObject, thePoint, theFactor):
- """
- * Scale the given object by the factor, creating its copy before the scaling.
- * \param theObject The object to be scaled.
- * \param thePoint Center point for scaling.
- * \param theFactor Scaling factor value.
- * \return New GEOM_Object, containing the scaled shape.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.ScaleShapeCopy(theObject, thePoint, theFactor)
- if TrsfOp.IsDone() == 0:
- print "ScaleShapeCopy : ", TrsfOp.GetErrorCode()
+ RaiseIfFailed("ScaleShapeCopy", TrsfOp)
return anObj
+## Create an object, symmetrical
+# to the given one relatively the given plane.
+# @param theObject The object to be mirrored.
+# @param thePlane Plane of symmetry.
+# @return New GEOM_Object, containing the mirrored shape.
+#
+# Example: see GEOM_TestAll.py
def MakeMirrorByPlane(theObject, thePlane):
- """
- * Create an object, symmetrical
- * to the given one relatively the given plane.
- * \param theObject The object to be mirrored.
- * \param thePlane Plane of symmetry.
- * \return New GEOM_Object, containing the mirrored shape.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.MirrorPlaneCopy(theObject, thePlane)
- if TrsfOp.IsDone() == 0:
- print "MirrorPlaneCopy : ", TrsfOp.GetErrorCode()
+ RaiseIfFailed("MirrorPlaneCopy", TrsfOp)
return anObj
+## Create an object, symmetrical
+# to the given one relatively the given axis.
+# @param theObject The object to be mirrored.
+# @param theAxis Axis of symmetry.
+# @return New GEOM_Object, containing the mirrored shape.
+#
+# Example: see GEOM_TestAll.py
def MakeMirrorByAxis(theObject, theAxis):
- """
- * Create an object, symmetrical
- * to the given one relatively the given axis.
- * \param theObject The object to be mirrored.
- * \param theAxis Axis of symmetry.
- * \return New GEOM_Object, containing the mirrored shape.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.MirrorAxisCopy(theObject, theAxis)
- if TrsfOp.IsDone() == 0:
- print "MirrorAxisCopy : ", TrsfOp.GetErrorCode()
+ RaiseIfFailed("MirrorAxisCopy", TrsfOp)
return anObj
+## Create an object, symmetrical
+# to the given one relatively the given point.
+# @param theObject The object to be mirrored.
+# @param thePoint Point of symmetry.
+# @return New GEOM_Object, containing the mirrored shape.
+#
+# Example: see GEOM_TestAll.py
def MakeMirrorByPoint(theObject, thePoint):
- """
- * Create an object, symmetrical
- * to the given one relatively the given point.
- * \param theObject The object to be mirrored.
- * \param thePoint Point of symmetry.
- * \return New GEOM_Object, containing the mirrored shape.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.MirrorPointCopy(theObject, thePoint)
- if TrsfOp.IsDone() == 0:
- print "MirrorPointCopy : ", TrsfOp.GetErrorCode()
- return anObj
-
+ RaiseIfFailed("MirrorPointCopy", TrsfOp)
+ return anObj
+
+## Modify the Location of the given object by LCS,
+# creating its copy before the setting.
+# @param theObject The object to be displaced.
+# @param theStartLCS Coordinate system to perform displacement from it.
+# If \a theStartLCS is NULL, displacement
+# will be performed from global CS.
+# If \a theObject itself is used as \a theStartLCS,
+# its location will be changed to \a theEndLCS.
+# @param theEndLCS Coordinate system to perform displacement to it.
+# @return New GEOM_Object, containing the displaced shape.
+#
+# Example: see GEOM_TestAll.py
def MakePosition(theObject, theStartLCS, theEndLCS):
- """
- * Modify the Location of the given object by LCS
- * creating its copy before the setting
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.PositionShapeCopy(theObject, theStartLCS, theEndLCS)
- if TrsfOp.IsDone() == 0:
- print "PositionShapeCopy : ", TrsfOp.GetErrorCode()
+ RaiseIfFailed("PositionShapeCopy", TrsfOp)
return anObj
+## Create new object as offset of the given one.
+# @param theObject The base object for the offset.
+# @param theOffset Offset value.
+# @return New GEOM_Object, containing the offset object.
+#
+# Example: see GEOM_TestAll.py
def MakeOffset(theObject, theOffset):
- """
- * Create new object as offset of the given one.
- * \param theObject The base object for the offset.
- * \param theOffset Offset value.
- * \return New GEOM_Object, containing the offset object.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.OffsetShapeCopy(theObject, theOffset)
- if TrsfOp.IsDone() == 0:
- print "OffsetShapeCopy : ", TrsfOp.GetErrorCode()
+ RaiseIfFailed("OffsetShapeCopy", TrsfOp)
return anObj
# -----------------------------------------------------------------------------
# Patterns
# -----------------------------------------------------------------------------
+## Translate the given object along the given vector a given number times
+# @param theObject The object to be translated.
+# @param theVector Direction of the translation.
+# @param theStep Distance to translate on.
+# @param theNbTimes Quantity of translations to be done.
+# @return New GEOM_Object, containing compound of all
+# the shapes, obtained after each translation.
+#
+# Example: see GEOM_TestAll.py
def MakeMultiTranslation1D(theObject, theVector, theStep, theNbTimes):
- """
- * Translate the given object along the given vector a given number times
- * \param theObject The object to be translated.
- * \param theVector Direction of the translation.
- * \param theStep Distance to translate on.
- * \param theNbTimes Quantity of translations to be done.
- * \return New GEOM_Object, containing compound of all
- * the shapes, obtained after each translation.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.MultiTranslate1D(theObject, theVector, theStep, theNbTimes)
- if TrsfOp.IsDone() == 0:
- print "MultiTranslate1D : ", TrsfOp.GetErrorCode()
- return anObj
-
+ RaiseIfFailed("MultiTranslate1D", TrsfOp)
+ return anObj
+
+## Conseqently apply two specified translations to theObject specified number of times.
+# @param theObject The object to be translated.
+# @param theVector1 Direction of the first translation.
+# @param theStep1 Step of the first translation.
+# @param theNbTimes1 Quantity of translations to be done along theVector1.
+# @param theVector2 Direction of the second translation.
+# @param theStep2 Step of the second translation.
+# @param theNbTimes2 Quantity of translations to be done along theVector2.
+# @return New GEOM_Object, containing compound of all
+# the shapes, obtained after each translation.
+#
+# Example: see GEOM_TestAll.py
def MakeMultiTranslation2D(theObject, theVector1, theStep1, theNbTimes1,
theVector2, theStep2, theNbTimes2):
- """
- * Conseqently apply two specified translations to theObject specified number of times.
- * \param theObject The object to be translated.
- * \param theVector1 Direction of the first translation.
- * \param theStep1 Step of the first translation.
- * \param theNbTimes1 Quantity of translations to be done along theVector1.
- * \param theVector2 Direction of the second translation.
- * \param theStep2 Step of the second translation.
- * \param theNbTimes2 Quantity of translations to be done along theVector2.
- * \return New GEOM_Object, containing compound of all
- * the shapes, obtained after each translation.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.MultiTranslate2D(theObject, theVector1, theStep1, theNbTimes1,
theVector2, theStep2, theNbTimes2)
- if TrsfOp.IsDone() == 0:
- print "MultiTranslate2D : ", TrsfOp.GetErrorCode()
+ RaiseIfFailed("MultiTranslate2D", TrsfOp)
return anObj
+## Rotate the given object around the given axis a given number times.
+# Rotation angle will be 2*PI/theNbTimes.
+# @param theObject The object to be rotated.
+# @param theAxis The rotation axis.
+# @param theNbTimes Quantity of rotations to be done.
+# @return New GEOM_Object, containing compound of all the
+# shapes, obtained after each rotation.
+#
+# Example: see GEOM_TestAll.py
def MultiRotate1D(theObject, theAxis, theNbTimes):
- """
- * Rotate the given object around the given axis a given number times.
- * Rotation angle will be 2*PI/theNbTimes.
- * \param theObject The object to be rotated.
- * \param theAxis The rotation axis.
- * \param theNbTimes Quantity of rotations to be done.
- * \return New GEOM_Object, containing compound of all the
- * shapes, obtained after each rotation.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.MultiRotate1D(theObject, theAxis, theNbTimes)
- if TrsfOp.IsDone() == 0:
- print "MultiRotate1D : ", TrsfOp.GetErrorCode()
- return anObj
-
+ RaiseIfFailed("MultiRotate1D", TrsfOp)
+ return anObj
+
+## Rotate the given object around the
+# given axis on the given angle a given number
+# times and multi-translate each rotation result.
+# Translation direction passes through center of gravity
+# of rotated shape and its projection on the rotation axis.
+# @param theObject The object to be rotated.
+# @param theAxis Rotation axis.
+# @param theAngle Rotation angle in graduces.
+# @param theNbTimes1 Quantity of rotations to be done.
+# @param theStep Translation distance.
+# @param theNbTimes2 Quantity of translations to be done.
+# @return New GEOM_Object, containing compound of all the
+# shapes, obtained after each transformation.
+#
+# Example: see GEOM_TestAll.py
def MultiRotate2D(theObject, theAxis, theAngle, theNbTimes1, theStep, theNbTimes2):
- """
- * Rotate the given object around the
- * given axis on the given angle a given number
- * times and multi-translate each rotation result.
- * Translation direction passes through center of gravity
- * of rotated shape and its projection on the rotation axis.
- * \param theObject The object to be rotated.
- * \param theAxis Rotation axis.
- * \param theAngle Rotation angle in graduces.
- * \param theNbTimes1 Quantity of rotations to be done.
- * \param theStep Translation distance.
- * \param theNbTimes2 Quantity of translations to be done.
- * \return New GEOM_Object, containing compound of all the
- * shapes, obtained after each transformation.
-
- * Example: see GEOM_TestAll.py
- """
anObj = TrsfOp.MultiRotate2D(theObject, theAxis, theAngle, theNbTimes1, theStep, theNbTimes2)
- if TrsfOp.IsDone() == 0:
- print "MultiRotate2D : ", TrsfOp.GetErrorCode()
+ RaiseIfFailed("MultiRotate2D", TrsfOp)
return anObj
+## The same, as MultiRotate1D(), but axis is given by direction and point
+#
+# Example: see GEOM_TestOthers.py
def MakeMultiRotation1D(aShape,aDir,aPoint,aNbTimes):
- """
- * The same, as MultiRotate1D(), but axis is given by direction and point
-
- * Example: see GEOM_TestOthers.py
- """
aVec = MakeLine(aPoint,aDir)
anObj = MultiRotate1D(aShape,aVec,aNbTimes)
return anObj
+## The same, as MultiRotate2D(), but axis is given by direction and point
+#
+# Example: see GEOM_TestOthers.py
def MakeMultiRotation2D(aShape,aDir,aPoint,anAngle,nbtimes1,aStep,nbtimes2):
- """
- * The same, as MultiRotate2D(), but axis is given by direction and point
-
- * Example: see GEOM_TestOthers.py
- """
aVec = MakeLine(aPoint,aDir)
anObj = MultiRotate2D(aShape,aVec,anAngle,nbtimes1,aStep,nbtimes2)
return anObj
# Local operations
# -----------------------------------------------------------------------------
+## Perform a fillet on all edges of the given shape.
+# @param theShape Shape, to perform fillet on.
+# @param theR Fillet radius.
+# @return New GEOM_Object, containing the result shape.
+#
+# Example: see GEOM_TestOthers.py
def MakeFilletAll(theShape, theR):
- """
- * Perform a fillet on all edges of the given shape.
- * \param theShape Shape, to perform fillet on.
- * \param theR Fillet radius.
- * \return New GEOM_Object, containing the result shape.
-
- * Example: see GEOM_TestOthers.py
- """
anObj = LocalOp.MakeFilletAll(theShape, theR)
- if LocalOp.IsDone() == 0:
- print "MakeFilletAll : ", LocalOp.GetErrorCode()
+ RaiseIfFailed("MakeFilletAll", LocalOp)
return anObj
+## Perform a fillet on the specified edges/faces of the given shape
+# @param theShape Shape, to perform fillet on.
+# @param theR Fillet radius.
+# @param theShapeType Type of shapes in <theListShapes>.
+# @param theListShapes Global indices of edges/faces to perform fillet on.
+# \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
+# @return New GEOM_Object, containing the result shape.
+#
+# Example: see GEOM_TestAll.py
def MakeFillet(theShape, theR, theShapeType, theListShapes):
- """
- * Perform a fillet on the specified edges/faces of the given shape
- * \param theShape Shape, to perform fillet on.
- * \param theR Fillet radius.
- * \param theShapeType Type of shapes in <theListShapes>.
- * \param theListShapes Global indices of edges/faces to perform fillet on.
- * \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
- * \return New GEOM_Object, containing the result shape.
-
- * Example: see GEOM_TestAll.py
- """
anObj = None
if theShapeType == ShapeType["EDGE"]:
anObj = LocalOp.MakeFilletEdges(theShape, theR, theListShapes)
+ RaiseIfFailed("MakeFilletEdges", LocalOp)
else:
anObj = LocalOp.MakeFilletFaces(theShape, theR, theListShapes)
- if LocalOp.IsDone() == 0:
- print "MakeFillet : ", LocalOp.GetErrorCode()
+ RaiseIfFailed("MakeFilletFaces", LocalOp)
return anObj
+## The same but with two Fillet Radius R1 and R2
+def MakeFilletR1R2(theShape, theR1, theR2, theShapeType, theListShapes):
+ anObj = None
+ if theShapeType == ShapeType["EDGE"]:
+ anObj = LocalOp.MakeFilletEdgesR1R2(theShape, theR1, theR2, theListShapes)
+ RaiseIfFailed("MakeFilletEdgesR1R2", LocalOp)
+ else:
+ anObj = LocalOp.MakeFilletFacesR1R2(theShape, theR1, theR2, theListShapes)
+ RaiseIfFailed("MakeFilletFacesR1R2", LocalOp)
+ return anObj
+
+## Perform a symmetric chamfer on all edges of the given shape.
+# @param theShape Shape, to perform chamfer on.
+# @param theD Chamfer size along each face.
+# @return New GEOM_Object, containing the result shape.
+#
+# Example: see GEOM_TestOthers.py
def MakeChamferAll(theShape, theD):
- """
- * Perform a symmetric chamfer on all edges of the given shape.
- * \param theShape Shape, to perform chamfer on.
- * \param theD Chamfer size along each face.
- * \return New GEOM_Object, containing the result shape.
-
- * Example: see GEOM_TestOthers.py
- """
anObj = LocalOp.MakeChamferAll(theShape, theD)
- if LocalOp.IsDone() == 0:
- print "MakeChamferAll : ", LocalOp.GetErrorCode()
+ RaiseIfFailed("MakeChamferAll", LocalOp)
return anObj
+## Perform a chamfer on edges, common to the specified faces,
+# with distance D1 on the Face1
+# @param theShape Shape, to perform chamfer on.
+# @param theD1 Chamfer size along \a theFace1.
+# @param theD2 Chamfer size along \a theFace2.
+# @param theFace1,theFace2 Global indices of two faces of \a theShape.
+# \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
+# @return New GEOM_Object, containing the result shape.
+#
+# Example: see GEOM_TestAll.py
def MakeChamferEdge(theShape, theD1, theD2, theFace1, theFace2):
- """
- * Perform a chamfer on edges, common to the specified faces,
- * with distance D1 on the Face1
- * \param theShape Shape, to perform chamfer on.
- * \param theD1 Chamfer size along \a theFace1.
- * \param theD2 Chamfer size along \a theFace2.
- * \param theFace1,theFace2 Global indices of two faces of \a theShape.
- * \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
- * \return New GEOM_Object, containing the result shape.
-
- * Example: see GEOM_TestAll.py
- """
anObj = LocalOp.MakeChamferEdge(theShape, theD1, theD2, theFace1, theFace2)
- if LocalOp.IsDone() == 0:
- print "MakeChamferEdge : ", LocalOp.GetErrorCode()
- return anObj
-
+ RaiseIfFailed("MakeChamferEdge", LocalOp)
+ return anObj
+
+## The Same chamfer but with params theD is chamfer lenght and
+# theAngle is Angle of chamfer (angle in radians)
+def MakeChamferEdgeAD(theShape, theD, theAngle, theFace1, theFace2):
+ anObj = LocalOp.MakeChamferEdgeAD(theShape, theD, theAngle, theFace1, theFace2)
+ RaiseIfFailed("MakeChamferEdgeAD", LocalOp)
+ return anObj
+
+## Perform a chamfer on all edges of the specified faces,
+# with distance D1 on the first specified face (if several for one edge)
+# @param theShape Shape, to perform chamfer on.
+# @param theD1 Chamfer size along face from \a theFaces. If both faces,
+# connected to the edge, are in \a theFaces, \a theD1
+# will be get along face, which is nearer to \a theFaces beginning.
+# @param theD2 Chamfer size along another of two faces, connected to the edge.
+# @param theFaces Sequence of global indices of faces of \a theShape.
+# \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
+# @return New GEOM_Object, containing the result shape.
+#
+# Example: see GEOM_TestAll.py
def MakeChamferFaces(theShape, theD1, theD2, theFaces):
- """
- * Perform a chamfer on all edges of the specified faces,
- * with distance D1 on the first specified face (if several for one edge)
- * \param theShape Shape, to perform chamfer on.
- * \param theD1 Chamfer size along face from \a theFaces. If both faces,
- * connected to the edge, are in \a theFaces, \a theD1
- * will be get along face, which is nearer to \a theFaces beginning.
- * \param theD2 Chamfer size along another of two faces, connected to the edge.
- * \param theFaces Sequence of global indices of faces of \a theShape.
- * \note Global index of sub-shape can be obtained, using method geompy.GetSubShapeID().
- * \return New GEOM_Object, containing the result shape.
-
- * Example: see GEOM_TestAll.py
- """
anObj = LocalOp.MakeChamferFaces(theShape, theD1, theD2, theFaces)
- if LocalOp.IsDone() == 0:
- print "MakeChamferFaces : ", LocalOp.GetErrorCode()
+ RaiseIfFailed("MakeChamferFaces", LocalOp)
return anObj
-def MakeChamfer(aShape,d1,d2,aShapeType,ListShape):
- """
- * Shortcut to MakeChamferEdge() and MakeChamferFaces()
+## The Same chamfer but with params theD is chamfer lenght and
+# theAngle is Angle of chamfer (angle in radians)
+def MakeChamferFacesAD(theShape, theD, theAngle, theFaces):
+ anObj = LocalOp.MakeChamferFacesAD(theShape, theD, theAngle, theFaces)
+ RaiseIfFailed("MakeChamferFacesAD", LocalOp)
+ return anObj
+
+## Perform a chamfer on edges,
+# with distance D1 on the first specified face (if several for one edge)
+# @param theShape Shape, to perform chamfer on.
+# @param theD1 and theD2 Chamfer size
+# @param theEdges Sequence of edges of \a theShape.
+# @return New GEOM_Object, containing the result shape.
+#
+# Example:
+def MakeChamferEdges(theShape, theD1, theD2, theEdges):
+ anObj = LocalOp.MakeChamferEdges(theShape, theD1, theD2, theEdges)
+ RaiseIfFailed("MakeChamferEdges", LocalOp)
+ return anObj
- * Example: see GEOM_TestOthers.py
- """
+## The Same chamfer but with params theD is chamfer lenght and
+# theAngle is Angle of chamfer (angle in radians)
+def MakeChamferEdgesAD(theShape, theD, theAngle, theEdges):
+ anObj = LocalOp.MakeChamferEdgesAD(theShape, theD, theAngle, theEdges)
+ RaiseIfFailed("MakeChamferEdgesAD", LocalOp)
+ return anObj
+
+## Shortcut to MakeChamferEdge() and MakeChamferFaces()
+#
+# Example: see GEOM_TestOthers.py
+def MakeChamfer(aShape,d1,d2,aShapeType,ListShape):
anObj = None
if aShapeType == ShapeType["EDGE"]:
anObj = MakeChamferEdge(aShape,d1,d2,ListShape[0],ListShape[1])
anObj = MakeChamferFaces(aShape,d1,d2,ListShape)
return anObj
+## Perform an Archimde operation on the given shape with given parameters.
+# The object presenting the resulting face is returned.
+# @param theShape Shape to be put in water.
+# @param theWeight Weight og the shape.
+# @param theWaterDensity Density of the water.
+# @param theMeshDeflection Deflection of the mesh, using to compute the section.
+# @return New GEOM_Object, containing a section of \a theShape
+# by a plane, corresponding to water level.
+#
+# Example: see GEOM_TestAll.py
def Archimede(theShape, theWeight, theWaterDensity, theMeshDeflection):
- """
- * Perform an Archimde operation on the given shape with given parameters.
- * The object presenting the resulting face is returned
- * \param theShape Shape to be put in water.
- * \param theWeight Weight og the shape.
- * \param theWaterDensity Density of the water.
- * \param theMeshDeflection Deflection of the mesh, using to compute the section.
- * \return New GEOM_Object, containing a section of \a theShape
- * by a plane, corresponding to water level.
-
- * Example: see GEOM_TestAll.py
- """
anObj = LocalOp.MakeArchimede(theShape, theWeight, theWaterDensity, theMeshDeflection)
- if LocalOp.IsDone() == 0:
- print "MakeArchimede : ", LocalOp.GetErrorCode()
+ RaiseIfFailed("MakeArchimede", LocalOp)
return anObj
# -----------------------------------------------------------------------------
# Information objects
# -----------------------------------------------------------------------------
+## Get point coordinates
+# @return [x, y, z]
+#
+# Example: see GEOM_TestMeasures.py
def PointCoordinates(Point):
- """
- * Get point coordinates
- * \return [x, y, z]
-
- * Example: see GEOM_TestMeasures.py
- """
aTuple = MeasuOp.PointCoordinates(Point)
- if MeasuOp.IsDone() == 0:
- print "PointCoordinates : ", MeasuOp.GetErrorCode()
+ RaiseIfFailed("PointCoordinates", MeasuOp)
return aTuple
+## Get summarized length of all wires,
+# area of surface and volume of the given shape.
+# @param theShape Shape to define properties of.
+# @return [theLength, theSurfArea, theVolume]
+# theLength: Summarized length of all wires of the given shape.
+# theSurfArea: Area of surface of the given shape.
+# theVolume: Volume of the given shape.
+#
+# Example: see GEOM_TestMeasures.py
def BasicProperties(theShape):
- """
- * Get summarized length of all wires,
- * area of surface and volume of the given shape.
- * \param theShape Shape to define properties of.
- * \return [theLength, theSurfArea, theVolume]
- * theLength: Summarized length of all wires of the given shape.
- * theSurfArea: Area of surface of the given shape.
- * theVolume: Volume of the given shape.
-
- * Example: see GEOM_TestMeasures.py
- """
aTuple = MeasuOp.GetBasicProperties(theShape)
- if MeasuOp.IsDone() == 0:
- print "BasicProperties : ", MeasuOp.GetErrorCode()
+ RaiseIfFailed("GetBasicProperties", MeasuOp)
return aTuple
+## Get parameters of bounding box of the given shape
+# @param theShape Shape to obtain bounding box of.
+# @return [Xmin,Xmax, Ymin,Ymax, Zmin,Zmax]
+# Xmin,Xmax: Limits of shape along OX axis.
+# Ymin,Ymax: Limits of shape along OY axis.
+# Zmin,Zmax: Limits of shape along OZ axis.
+#
+# Example: see GEOM_TestMeasures.py
def BoundingBox(theShape):
- """
- * Get parameters of bounding box of the given shape
- * \param theShape Shape to obtain bounding box of.
- * \return [Xmin,Xmax, Ymin,Ymax, Zmin,Zmax]
- * Xmin,Xmax: Limits of shape along OX axis.
- * Ymin,Ymax: Limits of shape along OY axis.
- * Zmin,Zmax: Limits of shape along OZ axis.
-
- * Example: see GEOM_TestMeasures.py
- """
aTuple = MeasuOp.GetBoundingBox(theShape)
- if MeasuOp.IsDone() == 0:
- print "BoundingBox : ", MeasuOp.GetErrorCode()
+ RaiseIfFailed("GetBoundingBox", MeasuOp)
return aTuple
+## Get inertia matrix and moments of inertia of theShape.
+# @param theShape Shape to calculate inertia of.
+# @return [I11,I12,I13, I21,I22,I23, I31,I32,I33, Ix,Iy,Iz]
+# I(1-3)(1-3): Components of the inertia matrix of the given shape.
+# Ix,Iy,Iz: Moments of inertia of the given shape.
+#
+# Example: see GEOM_TestMeasures.py
def Inertia(theShape):
- """
- * Get inertia matrix and moments of inertia of theShape.
- * \param theShape Shape to calculate inertia of.
- * \return [I11,I12,I13, I21,I22,I23, I31,I32,I33, Ix,Iy,Iz]
- * I(1-3)(1-3): Components of the inertia matrix of the given shape.
- * Ix,Iy,Iz: Moments of inertia of the given shape.
-
- * Example: see GEOM_TestMeasures.py
- """
aTuple = MeasuOp.GetInertia(theShape)
- if MeasuOp.IsDone() == 0:
- print "Inertia : ", MeasuOp.GetErrorCode()
+ RaiseIfFailed("GetInertia", MeasuOp)
return aTuple
+## Get minimal distance between the given shapes.
+# @param theShape1,theShape2 Shapes to find minimal distance between.
+# @return Value of the minimal distance between the given shapes.
+#
+# Example: see GEOM_TestMeasures.py
def MinDistance(theShape1, theShape2):
- """
- * Get minimal distance between the given shapes.
- * \param theShape1,theShape2 Shapes to find minimal distance between.
- * \return Value of the minimal distance between the given shapes.
-
- * Example: see GEOM_TestMeasures.py
- """
aTuple = MeasuOp.GetMinDistance(theShape1, theShape2)
- if MeasuOp.IsDone() == 0:
- print "MinDistance : ", MeasuOp.GetErrorCode()
+ RaiseIfFailed("GetMinDistance", MeasuOp)
return aTuple[0]
+## Get minimal distance between the given shapes.
+# @param theShape1,theShape2 Shapes to find minimal distance between.
+# @return Value of the minimal distance between the given shapes.
+#
+# Example: see GEOM_TestMeasures.py
+def MinDistanceComponents(theShape1, theShape2):
+ aTuple = MeasuOp.GetMinDistance(theShape1, theShape2)
+ RaiseIfFailed("GetMinDistance", MeasuOp)
+ aRes = [aTuple[0], aTuple[4] - aTuple[1], aTuple[5] - aTuple[2], aTuple[6] - aTuple[3]]
+ return aRes
+
+## Get angle between the given shapes.
+# @param theShape1,theShape2 Lines or linear edges to find angle between.
+# @return Value of the angle between the given shapes.
+#
+# Example: see GEOM_TestMeasures.py
+def GetAngle(theShape1, theShape2):
+ anAngle = MeasuOp.GetAngle(theShape1, theShape2)
+ RaiseIfFailed("GetAngle", MeasuOp)
+ return anAngle
+
+## Get min and max tolerances of sub-shapes of theShape
+# @param theShape Shape, to get tolerances of.
+# @return [FaceMin,FaceMax, EdgeMin,EdgeMax, VertMin,VertMax]
+# FaceMin,FaceMax: Min and max tolerances of the faces.
+# EdgeMin,EdgeMax: Min and max tolerances of the edges.
+# VertMin,VertMax: Min and max tolerances of the vertices.
+#
+# Example: see GEOM_TestMeasures.py
def Tolerance(theShape):
- """
- * Get min and max tolerances of sub-shapes of theShape
- * \param theShape Shape, to get tolerances of.
- * \return [FaceMin,FaceMax, EdgeMin,EdgeMax, VertMin,VertMax]
- * FaceMin,FaceMax: Min and max tolerances of the faces.
- * EdgeMin,EdgeMax: Min and max tolerances of the edges.
- * VertMin,VertMax: Min and max tolerances of the vertices.
-
- * Example: see GEOM_TestMeasures.py
- """
aTuple = MeasuOp.GetTolerance(theShape)
- if MeasuOp.IsDone() == 0:
- print "Tolerance : ", MeasuOp.GetErrorCode()
+ RaiseIfFailed("GetTolerance", MeasuOp)
return aTuple
+## Obtain description of the given shape (number of sub-shapes of each type)
+# @param theShape Shape to be described.
+# @return Description of the given shape.
+#
+# Example: see GEOM_TestMeasures.py
def WhatIs(theShape):
- """
- * Obtain description of the given shape (number of sub-shapes of each type)
- * \param theShape Shape to be described.
- * \return Description of the given shape.
-
- * Example: see GEOM_TestMeasures.py
- """
aDescr = MeasuOp.WhatIs(theShape)
- if MeasuOp.IsDone() == 0:
- print "WhatIs : ", MeasuOp.GetErrorCode()
+ RaiseIfFailed("WhatIs", MeasuOp)
return aDescr
+## Get a point, situated at the centre of mass of theShape.
+# @param theShape Shape to define centre of mass of.
+# @return New GEOM_Object, containing the created point.
+#
+# Example: see GEOM_TestMeasures.py
def MakeCDG(theShape):
- """
- * Get a point, situated at the centre of mass of theShape.
- * \param theShape Shape to define centre of mass of.
- * \return New GEOM_Object, containing the created point.
-
- * Example: see GEOM_TestMeasures.py
- """
anObj = MeasuOp.GetCentreOfMass(theShape)
- if MeasuOp.IsDone() == 0:
- print "GetCentreOfMass : ", MeasuOp.GetErrorCode()
- return anObj
-
-def CheckShape(theShape):
- """
- * Check a topology of the given shape.
- * \param theShape Shape to check validity of.
- * \return TRUE, if the shape "seems to be valid" from the topological point of view.
- * If theShape is invalid, prints a description of problem.
-
- * Example: see GEOM_TestMeasures.py
- """
- (IsValid, Status) = MeasuOp.CheckShape(theShape)
- if MeasuOp.IsDone() == 0:
- print "CheckShape : ", MeasuOp.GetErrorCode()
+ RaiseIfFailed("GetCentreOfMass", MeasuOp)
+ return anObj
+
+## Get a normale to the given face. If the point is not given,
+# the normale is calculated at the center of mass.
+# @param theFace Face to define normale of.
+# @param theOptionalPoint Point to compute the normale at.
+# @return New GEOM_Object, containing the created vector.
+#
+# Example: see GEOM_TestMeasures.py
+def GetNormal(theFace, theOptionalPoint = None):
+ anObj = MeasuOp.GetNormal(theFace, theOptionalPoint)
+ RaiseIfFailed("GetNormal", MeasuOp)
+ return anObj
+
+## Check a topology of the given shape.
+# @param theShape Shape to check validity of.
+# @param theIsCheckGeom If FALSE, only the shape's topology will be checked,
+# if TRUE, the shape's geometry will be checked also.
+# @return TRUE, if the shape "seems to be valid".
+# If theShape is invalid, prints a description of problem.
+#
+# Example: see GEOM_TestMeasures.py
+def CheckShape(theShape, theIsCheckGeom = 0):
+ if theIsCheckGeom:
+ (IsValid, Status) = MeasuOp.CheckShapeWithGeometry(theShape)
+ RaiseIfFailed("CheckShapeWithGeometry", MeasuOp)
else:
- if IsValid == 0:
+ (IsValid, Status) = MeasuOp.CheckShape(theShape)
+ RaiseIfFailed("CheckShape", MeasuOp)
+ if IsValid == 0:
print Status
return IsValid
+## Get position (LCS) of theShape.
+#
+# Origin of the LCS is situated at the shape's center of mass.
+# Axes of the LCS are obtained from shape's location or,
+# if the shape is a planar face, from position of its plane.
+#
+# @param theShape Shape to calculate position of.
+# @return [Ox,Oy,Oz, Zx,Zy,Zz, Xx,Xy,Xz].
+# Ox,Oy,Oz: Coordinates of shape's LCS origin.
+# Zx,Zy,Zz: Coordinates of shape's LCS normal(main) direction.
+# Xx,Xy,Xz: Coordinates of shape's LCS X direction.
+#
+# Example: see GEOM_TestMeasures.py
+def GetPosition(theShape):
+ aTuple = MeasuOp.GetPosition(theShape)
+ RaiseIfFailed("GetPosition", MeasuOp)
+ return aTuple
+
+## Get kind of theShape.
+#
+# @param theShape Shape to get a kind of.
+# @return Returns a kind of shape in terms of <VAR>GEOM_IKindOfShape.shape_kind</VAR> enumeration
+# and a list of parameters, describing the shape.
+# @note Concrete meaning of each value, returned via \a theIntegers
+# or \a theDoubles list depends on the kind of the shape.
+# The full list of possible outputs is:
+#
+# geompy.kind.COMPOUND nb_solids nb_faces nb_edges nb_vertices
+# geompy.kind.COMPSOLID nb_solids nb_faces nb_edges nb_vertices
+#
+# geompy.kind.SHELL geompy.info.CLOSED nb_faces nb_edges nb_vertices
+# geompy.kind.SHELL geompy.info.UNCLOSED nb_faces nb_edges nb_vertices
+#
+# geompy.kind.WIRE geompy.info.CLOSED nb_edges nb_vertices
+# geompy.kind.WIRE geompy.info.UNCLOSED nb_edges nb_vertices
+#
+# geompy.kind.SPHERE xc yc zc R
+# geompy.kind.CYLINDER xb yb zb dx dy dz R H
+# geompy.kind.BOX xc yc zc ax ay az
+# geompy.kind.ROTATED_BOX xc yc zc zx zy zz xx xy xz ax ay az
+# geompy.kind.TORUS xc yc zc dx dy dz R_1 R_2
+# geompy.kind.CONE xb yb zb dx dy dz R_1 R_2 H
+# geompy.kind.POLYHEDRON nb_faces nb_edges nb_vertices
+# geompy.kind.SOLID nb_faces nb_edges nb_vertices
+#
+# geompy.kind.SPHERE2D xc yc zc R
+# geompy.kind.CYLINDER2D xb yb zb dx dy dz R H
+# geompy.kind.TORUS2D xc yc zc dx dy dz R_1 R_2
+# geompy.kind.CONE2D xc yc zc dx dy dz R_1 R_2 H
+# geompy.kind.DISK_CIRCLE xc yc zc dx dy dz R
+# geompy.kind.DISK_ELLIPSE xc yc zc dx dy dz R_1 R_2
+# geompy.kind.POLYGON xo yo zo dx dy dz nb_edges nb_vertices
+# geompy.kind.PLANE xo yo zo dx dy dz
+# geompy.kind.PLANAR xo yo zo dx dy dz nb_edges nb_vertices
+# geompy.kind.FACE nb_edges nb_vertices
+#
+# geompy.kind.CIRCLE xc yc zc dx dy dz R
+# geompy.kind.ARC_CIRCLE xc yc zc dx dy dz R x1 y1 z1 x2 y2 z2
+# geompy.kind.ELLIPSE xc yc zc dx dy dz R_1 R_2
+# geompy.kind.ARC_ELLIPSE xc yc zc dx dy dz R_1 R_2 x1 y1 z1 x2 y2 z2
+# geompy.kind.LINE xo yo zo dx dy dz
+# geompy.kind.SEGMENT x1 y1 z1 x2 y2 z2
+# geompy.kind.EDGE nb_vertices
+#
+# geompy.kind.VERTEX x y z
+#
+# Example: see GEOM_TestMeasures.py
+def KindOfShape(theShape):
+ aRoughTuple = MeasuOp.KindOfShape(theShape)
+ RaiseIfFailed("KindOfShape", MeasuOp)
+
+ aKind = aRoughTuple[0]
+ anInts = aRoughTuple[1]
+ aDbls = aRoughTuple[2]
+
+ # Now there is no exception from this rule:
+ aKindTuple = [aKind] + aDbls + anInts
+
+ # If they are we will regroup parameters for such kind of shape.
+ # For example:
+ #if aKind == kind.SOME_KIND:
+ # # SOME_KIND int int double int double double
+ # aKindTuple = [aKind, anInts[0], anInts[1], aDbls[0], anInts[2], aDbls[1], aDbls[2]]
+
+ return aKindTuple
+
# -----------------------------------------------------------------------------
# Import/Export objects
# -----------------------------------------------------------------------------
+## Import a shape from the BREP or IGES or STEP file
+# (depends on given format) with given name.
+# @param theFileName The file, containing the shape.
+# @param theFormatName Specify format for the file reading.
+# Available formats can be obtained with InsertOp.ImportTranslators() method.
+# @return New GEOM_Object, containing the imported shape.
+#
+# Example: see GEOM_TestOthers.py
def Import(theFileName, theFormatName):
- """
- * Import a shape from the BREP or IGES or STEP file
- * (depends on given format) with given name.
- * \param theFileName The file, containing the shape.
- * \param theFormatName Specify format for the file reading.
- * Available formats can be obtained with InsertOp.ImportTranslators() method.
- * \return New GEOM_Object, containing the imported shape.
-
- * Example: see GEOM_TestOthers.py
- """
anObj = InsertOp.Import(theFileName, theFormatName)
- if InsertOp.IsDone() == 0:
- print "Import : ", InsertOp.GetErrorCode()
+ RaiseIfFailed("Import", InsertOp)
return anObj
+## Shortcut to Import() for BREP format
+#
+# Example: see GEOM_TestOthers.py
def ImportBREP(theFileName):
- """
- * Shortcut to Import() for BREP format
-
- * Example: see GEOM_TestOthers.py
- """
return Import(theFileName, "BREP")
+## Shortcut to Import() for IGES format
+#
+# Example: see GEOM_TestOthers.py
def ImportIGES(theFileName):
- """
- * Shortcut to Import() for IGES format
-
- * Example: see GEOM_TestOthers.py
- """
return Import(theFileName, "IGES")
+## Shortcut to Import() for STEP format
+#
+# Example: see GEOM_TestOthers.py
def ImportSTEP(theFileName):
- """
- * Shortcut to Import() for STEP format
-
- * Example: see GEOM_TestOthers.py
- """
return Import(theFileName, "STEP")
+## Export the given shape into a file with given name.
+# @param theObject Shape to be stored in the file.
+# @param theFileName Name of the file to store the given shape in.
+# @param theFormatName Specify format for the shape storage.
+# Available formats can be obtained with InsertOp.ImportTranslators() method.
+#
+# Example: see GEOM_TestOthers.py
def Export(theObject, theFileName, theFormatName):
- """
- * Export the given shape into a file with given name.
- * \param theObject Shape to be stored in the file.
- * \param theFileName Name of the file to store the given shape in.
- * \param theFormatName Specify format for the shape storage.
- * Available formats can be obtained with InsertOp.ImportTranslators() method.
-
- * Example: see GEOM_TestOthers.py
- """
InsertOp.Export(theObject, theFileName, theFormatName)
- if InsertOp.IsDone() == 0:
- print "Export : ", InsertOp.GetErrorCode()
+ RaiseIfFailed("Export", InsertOp)
+## Shortcut to Export() for BREP format
+#
+# Example: see GEOM_TestOthers.py
def ExportBREP(theObject, theFileName):
- """
- * Shortcut to Export() for BREP format
-
- * Example: see GEOM_TestOthers.py
- """
return Export(theObject, theFileName, "BREP")
+## Shortcut to Export() for IGES format
+#
+# Example: see GEOM_TestOthers.py
def ExportIGES(theObject, theFileName):
- """
- * Shortcut to Export() for IGES format
-
- * Example: see GEOM_TestOthers.py
- """
return Export(theObject, theFileName, "IGES")
+## Shortcut to Export() for STEP format
+#
+# Example: see GEOM_TestOthers.py
def ExportSTEP(theObject, theFileName):
- """
- * Shortcut to Export() for STEP format
-
- * Example: see GEOM_TestOthers.py
- """
return Export(theObject, theFileName, "STEP")
# -----------------------------------------------------------------------------
# Block operations
# -----------------------------------------------------------------------------
+## Create a quadrangle face from four edges. Order of Edges is not
+# important. It is not necessary that edges share the same vertex.
+# @param E1,E2,E3,E4 Edges for the face bound.
+# @return New GEOM_Object, containing the created face.
+#
+# Example: see GEOM_Spanner.py
def MakeQuad(E1, E2, E3, E4):
- """
- * Create a quadrangle face from four edges. Order of Edges is not
- * important. It is not necessary that edges share the same vertex.
- * \param E1,E2,E3,E4 Edges for the face bound.
- * \return New GEOM_Object, containing the created face.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.MakeQuad(E1, E2, E3, E4)
- if BlocksOp.IsDone() == 0:
- print "MakeQuad : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("MakeQuad", BlocksOp)
return anObj
+## Create a quadrangle face on two edges.
+# The missing edges will be built by creating the shortest ones.
+# @param E1,E2 Two opposite edges for the face.
+# @return New GEOM_Object, containing the created face.
+#
+# Example: see GEOM_Spanner.py
def MakeQuad2Edges(E1, E2):
- """
- * Create a quadrangle face on two edges.
- * The missing edges will be built by creating the shortest ones.
- * \param E1,E2 Two opposite edges for the face.
- * \return New GEOM_Object, containing the created face.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.MakeQuad2Edges(E1, E2)
- if BlocksOp.IsDone() == 0:
- print "MakeQuad2Edges : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("MakeQuad2Edges", BlocksOp)
return anObj
+## Create a quadrangle face with specified corners.
+# The missing edges will be built by creating the shortest ones.
+# @param V1,V2,V3,V4 Corner vertices for the face.
+# @return New GEOM_Object, containing the created face.
+#
+# Example: see GEOM_Spanner.py
def MakeQuad4Vertices(V1, V2, V3, V4):
- """
- * Create a quadrangle face with specified corners.
- * The missing edges will be built by creating the shortest ones.
- * \param V1,V2,V3,V4 Corner vertices for the face.
- * \return New GEOM_Object, containing the created face.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.MakeQuad4Vertices(V1, V2, V3, V4)
- if BlocksOp.IsDone() == 0:
- print "MakeQuad4Vertices : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("MakeQuad4Vertices", BlocksOp)
return anObj
+## Create a hexahedral solid, bounded by the six given faces. Order of
+# faces is not important. It is not necessary that Faces share the same edge.
+# @param F1,F2,F3,F4,F5,F6 Faces for the hexahedral solid.
+# @return New GEOM_Object, containing the created solid.
+#
+# Example: see GEOM_Spanner.py
def MakeHexa(F1, F2, F3, F4, F5, F6):
- """
- * Create a hexahedral solid, bounded by the six given faces. Order of
- * faces is not important. It is not necessary that Faces share the same edge.
- * \param F1,F2,F3,F4,F5,F6 Faces for the hexahedral solid.
- * \return New GEOM_Object, containing the created solid.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.MakeHexa(F1, F2, F3, F4, F5, F6)
- if BlocksOp.IsDone() == 0:
- print "MakeHexa : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("MakeHexa", BlocksOp)
return anObj
+## Create a hexahedral solid between two given faces.
+# The missing faces will be built by creating the smallest ones.
+# @param F1,F2 Two opposite faces for the hexahedral solid.
+# @return New GEOM_Object, containing the created solid.
+#
+# Example: see GEOM_Spanner.py
def MakeHexa2Faces(F1, F2):
- """
- * Create a hexahedral solid between two given faces.
- * The missing faces will be built by creating the smallest ones.
- * \param F1,F2 Two opposite faces for the hexahedral solid.
- * \return New GEOM_Object, containing the created solid.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.MakeHexa2Faces(F1, F2)
- if BlocksOp.IsDone() == 0:
- print "MakeHexa2Faces : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("MakeHexa2Faces", BlocksOp)
return anObj
+## Get a vertex, found in the given shape by its coordinates.
+# @param theShape Block or a compound of blocks.
+# @param theX,theY,theZ Coordinates of the sought vertex.
+# @param theEpsilon Maximum allowed distance between the resulting
+# vertex and point with the given coordinates.
+# @return New GEOM_Object, containing the found vertex.
+#
+# Example: see GEOM_TestOthers.py
def GetPoint(theShape, theX, theY, theZ, theEpsilon):
- """
- * Get a vertex, found in the given shape by its coordinates.
- * \param theShape Block or a compound of blocks.
- * \param theX,theY,theZ Coordinates of the sought vertex.
- * \param theEpsilon Maximum allowed distance between the resulting
- * vertex and point with the given coordinates.
- * \return New GEOM_Object, containing the found vertex.
-
- * Example: see GEOM_TestOthers.py
- """
anObj = BlocksOp.GetPoint(theShape, theX, theY, theZ, theEpsilon)
- if BlocksOp.IsDone() == 0:
- print "GetPoint : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("GetPoint", BlocksOp)
return anObj
+## Get an edge, found in the given shape by two given vertices.
+# @param theShape Block or a compound of blocks.
+# @param thePoint1,thePoint2 Points, close to the ends of the desired edge.
+# @return New GEOM_Object, containing the found edge.
+#
+# Example: see GEOM_Spanner.py
def GetEdge(theShape, thePoint1, thePoint2):
- """
- * Get an edge, found in the given shape by two given vertices.
- * \param theShape Block or a compound of blocks.
- * \param thePoint1,thePoint2 Points, close to the ends of the desired edge.
- * \return New GEOM_Object, containing the found edge.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.GetEdge(theShape, thePoint1, thePoint2)
- if BlocksOp.IsDone() == 0:
- print "GetEdge : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("GetEdge", BlocksOp)
return anObj
+## Find an edge of the given shape, which has minimal distance to the given point.
+# @param theShape Block or a compound of blocks.
+# @param thePoint Point, close to the desired edge.
+# @return New GEOM_Object, containing the found edge.
+#
+# Example: see GEOM_TestOthers.py
def GetEdgeNearPoint(theShape, thePoint):
- """
- * Find an edge of the given shape, which has minimal distance to the given point.
- * \param theShape Block or a compound of blocks.
- * \param thePoint Point, close to the desired edge.
- * \return New GEOM_Object, containing the found edge.
-
- * Example: see GEOM_TestOthers.py
- """
anObj = BlocksOp.GetEdgeNearPoint(theShape, thePoint)
- if BlocksOp.IsDone() == 0:
- print "GetEdgeNearPoint : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("GetEdgeNearPoint", BlocksOp)
return anObj
+## Returns a face, found in the given shape by four given corner vertices.
+# @param theShape Block or a compound of blocks.
+# @param thePoint1-thePoint4 Points, close to the corners of the desired face.
+# @return New GEOM_Object, containing the found face.
+#
+# Example: see GEOM_Spanner.py
def GetFaceByPoints(theShape, thePoint1, thePoint2, thePoint3, thePoint4):
- """
- * Returns a face, found in the given shape by four given corner vertices.
- * \param theShape Block or a compound of blocks.
- * \param thePoint1-thePoint4 Points, close to the corners of the desired face.
- * \return New GEOM_Object, containing the found face.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.GetFaceByPoints(theShape, thePoint1, thePoint2, thePoint3, thePoint4)
- if BlocksOp.IsDone() == 0:
- print "GetFaceByPoints : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("GetFaceByPoints", BlocksOp)
return anObj
+## Get a face of block, found in the given shape by two given edges.
+# @param theShape Block or a compound of blocks.
+# @param theEdge1,theEdge2 Edges, close to the edges of the desired face.
+# @return New GEOM_Object, containing the found face.
+#
+# Example: see GEOM_Spanner.py
def GetFaceByEdges(theShape, theEdge1, theEdge2):
- """
- * Get a face of block, found in the given shape by two given edges.
- * \param theShape Block or a compound of blocks.
- * \param theEdge1,theEdge2 Edges, close to the edges of the desired face.
- * \return New GEOM_Object, containing the found face.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.GetFaceByEdges(theShape, theEdge1, theEdge2)
- if BlocksOp.IsDone() == 0:
- print "GetFaceByEdges : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("GetFaceByEdges", BlocksOp)
return anObj
+## Find a face, opposite to the given one in the given block.
+# @param theBlock Must be a hexahedral solid.
+# @param theFace Face of \a theBlock, opposite to the desired face.
+# @return New GEOM_Object, containing the found face.
+#
+# Example: see GEOM_Spanner.py
def GetOppositeFace(theBlock, theFace):
- """
- * Find a face, opposite to the given one in the given block.
- * \param theBlock Must be a hexahedral solid.
- * \param theFace Face of \a theBlock, opposite to the desired face.
- * \return New GEOM_Object, containing the found face.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.GetOppositeFace(theBlock, theFace)
- if BlocksOp.IsDone() == 0:
- print "GetOppositeFace : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("GetOppositeFace", BlocksOp)
return anObj
+## Find a face of the given shape, which has minimal distance to the given point.
+# @param theShape Block or a compound of blocks.
+# @param thePoint Point, close to the desired face.
+# @return New GEOM_Object, containing the found face.
+#
+# Example: see GEOM_Spanner.py
def GetFaceNearPoint(theShape, thePoint):
- """
- * Find a face of the given shape, which has minimal distance to the given point.
- * \param theShape Block or a compound of blocks.
- * \param thePoint Point, close to the desired face.
- * \return New GEOM_Object, containing the found face.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.GetFaceNearPoint(theShape, thePoint)
- if BlocksOp.IsDone() == 0:
- print "GetFaceNearPoint : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("GetFaceNearPoint", BlocksOp)
return anObj
+## Find a face of block, whose outside normale has minimal angle with the given vector.
+# @param theShape Block or a compound of blocks.
+# @param theVector Vector, close to the normale of the desired face.
+# @return New GEOM_Object, containing the found face.
+#
+# Example: see GEOM_Spanner.py
def GetFaceByNormale(theBlock, theVector):
- """
- * Find a face of block, whose outside normale has minimal angle with the given vector.
- * \param theShape Block or a compound of blocks.
- * \param theVector Vector, close to the normale of the desired face.
- * \return New GEOM_Object, containing the found face.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.GetFaceByNormale(theBlock, theVector)
- if BlocksOp.IsDone() == 0:
- print "GetFaceByNormale : ", BlocksOp.GetErrorCode()
- return anObj
-
+ RaiseIfFailed("GetFaceByNormale", BlocksOp)
+ return anObj
+
+## Check, if the compound of blocks is given.
+# To be considered as a compound of blocks, the
+# given shape must satisfy the following conditions:
+# - Each element of the compound should be a Block (6 faces and 12 edges).
+# - A connection between two Blocks should be an entire quadrangle face or an entire edge.
+# - The compound should be connexe.
+# - The glue between two quadrangle faces should be applied.
+# @param theCompound The compound to check.
+# @return TRUE, if the given shape is a compound of blocks.
+# If theCompound is not valid, prints all discovered errors.
+#
+# Example: see GEOM_Spanner.py
def CheckCompoundOfBlocks(theCompound):
- """
- * Check, if the compound of blocks is given.
- * To be considered as a compound of blocks, the
- * given shape must satisfy the following conditions:
- * - Each element of the compound should be a Block (6 faces and 12 edges).
- * - A connection between two Blocks should be an entire quadrangle face or an entire edge.
- * - The compound should be connexe.
- * - The glue between two quadrangle faces should be applied.
- * \param theCompound The compound to check.
- * \return TRUE, if the given shape is a compound of blocks.
- * If theCompound is not valid, prints all discovered errors.
-
- * Example: see GEOM_Spanner.py
- """
(IsValid, BCErrors) = BlocksOp.CheckCompoundOfBlocks(theCompound)
- if BlocksOp.IsDone() == 0:
- print "CheckCompoundOfBlocks : ", BlocksOp.GetErrorCode()
- else:
- if IsValid == 0:
+ RaiseIfFailed("CheckCompoundOfBlocks", BlocksOp)
+ if IsValid == 0:
Descr = BlocksOp.PrintBCErrors(theCompound, BCErrors)
print Descr
return IsValid
+## Remove all seam and degenerated edges from \a theShape.
+# Unite faces and edges, sharing one surface. It means that
+# this faces must have references to one C++ surface object (handle).
+# @param theShape The compound or single solid to remove irregular edges from.
+# @return Improved shape.
+#
+# Example: see GEOM_TestOthers.py
def RemoveExtraEdges(theShape):
- """
- * Remove all seam and degenerated edges from \a theShape.
- * Unite faces and edges, sharing one surface.
- * \param theShape The compound or single solid to remove irregular edges from.
- * \return Improved shape.
-
- * Example: see GEOM_TestOthers.py
- """
anObj = BlocksOp.RemoveExtraEdges(theShape)
- if BlocksOp.IsDone() == 0:
- print "RemoveExtraEdges : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("RemoveExtraEdges", BlocksOp)
return anObj
+## Check, if the given shape is a blocks compound.
+# Fix all detected errors.
+# \note Single block can be also fixed by this method.
+# @param theCompound The compound to check and improve.
+# @return Improved compound.
+#
+# Example: see GEOM_TestOthers.py
def CheckAndImprove(theShape):
- """
- * Check, if the given shape is a blocks compound.
- * Fix all detected errors.
- * \note Single block can be also fixed by this method.
- * \param theCompound The compound to check and improve.
- * \return Improved compound.
-
- * Example: see GEOM_TestOthers.py
- """
anObj = BlocksOp.CheckAndImprove(theShape)
- if BlocksOp.IsDone() == 0:
- print "CheckAndImprove : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("CheckAndImprove", BlocksOp)
return anObj
+## Get all the blocks, contained in the given compound.
+# @param theCompound The compound to explode.
+# @param theMinNbFaces If solid has lower number of faces, it is not a block.
+# @param theMaxNbFaces If solid has higher number of faces, it is not a block.
+# \note If theMaxNbFaces = 0, the maximum number of faces is not restricted.
+# @return List of GEOM_Objects, containing the retrieved blocks.
+#
+# Example: see GEOM_TestOthers.py
def MakeBlockExplode(theCompound, theMinNbFaces, theMaxNbFaces):
- """
- * Get all the blocks, contained in the given compound.
- * \param theCompound The compound to explode.
- * \param theMinNbFaces If solid has lower number of faces, it is not a block.
- * \param theMaxNbFaces If solid has higher number of faces, it is not a block.
- * \note If theMaxNbFaces = 0, the maximum number of faces is not restricted.
- * \return List of GEOM_Objects, containing the retrieved blocks.
-
- * Example: see GEOM_TestOthers.py
- """
aList = BlocksOp.ExplodeCompoundOfBlocks(theCompound, theMinNbFaces, theMaxNbFaces)
- if BlocksOp.IsDone() == 0:
- print "MakeBlockExplode : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("ExplodeCompoundOfBlocks", BlocksOp)
return aList
+## Find block, containing the given point inside its volume or on boundary.
+# @param theCompound Compound, to find block in.
+# @param thePoint Point, close to the desired block. If the point lays on
+# boundary between some blocks, we return block with nearest center.
+# @return New GEOM_Object, containing the found block.
+#
+# Example: see GEOM_Spanner.py
def GetBlockNearPoint(theCompound, thePoint):
- """
- * Find block, containing the given point inside its volume or on boundary.
- * \param theCompound Compound, to find block in.
- * \param thePoint Point, close to the desired block. If the point lays on
- * boundary between some blocks, we return block with nearest center.
- * \return New GEOM_Object, containing the found block.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.GetBlockNearPoint(theCompound, thePoint)
- if BlocksOp.IsDone() == 0:
- print "GetBlockNearPoint : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("GetBlockNearPoint", BlocksOp)
return anObj
+## Find block, containing all the elements, passed as the parts, or maximum quantity of them.
+# @param theCompound Compound, to find block in.
+# @param theParts List of faces and/or edges and/or vertices to be parts of the found block.
+# @return New GEOM_Object, containing the found block.
+#
+# Example: see GEOM_TestOthers.py
def GetBlockByParts(theCompound, theParts):
- """
- * Find block, containing all the elements, passed as the parts, or maximum quantity of them.
- * \param theCompound Compound, to find block in.
- * \param theParts List of faces and/or edges and/or vertices to be parts of the found block.
- * \return New GEOM_Object, containing the found block.
-
- * Example: see GEOM_TestOthers.py
- """
anObj = BlocksOp.GetBlockByParts(theCompound, theParts)
- if BlocksOp.IsDone() == 0:
- print "GetBlockByParts : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("GetBlockByParts", BlocksOp)
return anObj
+## Return all blocks, containing all the elements, passed as the parts.
+# @param theCompound Compound, to find blocks in.
+# @param theParts List of faces and/or edges and/or vertices to be parts of the found blocks.
+# @return List of GEOM_Objects, containing the found blocks.
+#
+# Example: see GEOM_Spanner.py
def GetBlocksByParts(theCompound, theParts):
- """
- * Return all blocks, containing all the elements, passed as the parts.
- * \param theCompound Compound, to find blocks in.
- * \param theParts List of faces and/or edges and/or vertices to be parts of the found blocks.
- * \return List of GEOM_Objects, containing the found blocks.
-
- * Example: see GEOM_Spanner.py
- """
aList = BlocksOp.GetBlocksByParts(theCompound, theParts)
- if BlocksOp.IsDone() == 0:
- print "GetBlocksByParts : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("GetBlocksByParts", BlocksOp)
return aList
+## Multi-transformate block and glue the result.
+# Transformation is defined so, as to superpose direction faces.
+# @param Block Hexahedral solid to be multi-transformed.
+# @param DirFace1 ID of First direction face.
+# @param DirFace2 ID of Second direction face.
+# @param NbTimes Quantity of transformations to be done.
+# \note Unique ID of sub-shape can be obtained, using method GetSubShapeID().
+# @return New GEOM_Object, containing the result shape.
+#
+# Example: see GEOM_Spanner.py
def MakeMultiTransformation1D(Block, DirFace1, DirFace2, NbTimes):
- """
- * Multi-transformate block and glue the result.
- * Transformation is defined so, as to superpose direction faces.
- * \param Block Hexahedral solid to be multi-transformed.
- * \param DirFace1 ID of First direction face.
- * \param DirFace2 ID of Second direction face.
- * \param NbTimes Quantity of transformations to be done.
- * \note Unique ID of sub-shape can be obtained, using method GetSubShapeID().
- * \return New GEOM_Object, containing the result shape.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.MakeMultiTransformation1D(Block, DirFace1, DirFace2, NbTimes)
- if BlocksOp.IsDone() == 0:
- print "MakeMultiTransformation1D : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("MakeMultiTransformation1D", BlocksOp)
return anObj
+## Multi-transformate block and glue the result.
+# @param Block Hexahedral solid to be multi-transformed.
+# @param DirFace1U,DirFace2U IDs of Direction faces for the first transformation.
+# @param DirFace1V,DirFace2V IDs of Direction faces for the second transformation.
+# @param NbTimesU,NbTimesV Quantity of transformations to be done.
+# @return New GEOM_Object, containing the result shape.
+#
+# Example: see GEOM_Spanner.py
def MakeMultiTransformation2D(Block, DirFace1U, DirFace2U, NbTimesU,
DirFace1V, DirFace2V, NbTimesV):
- """
- * Multi-transformate block and glue the result.
- * \param Block Hexahedral solid to be multi-transformed.
- * \param DirFace1U,DirFace2U IDs of Direction faces for the first transformation.
- * \param DirFace1V,DirFace2V IDs of Direction faces for the second transformation.
- * \param NbTimesU,NbTimesV Quantity of transformations to be done.
- * \return New GEOM_Object, containing the result shape.
-
- * Example: see GEOM_Spanner.py
- """
anObj = BlocksOp.MakeMultiTransformation2D(Block, DirFace1U, DirFace2U, NbTimesU,
DirFace1V, DirFace2V, NbTimesV)
- if BlocksOp.IsDone() == 0:
- print "MakeMultiTransformation2D : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("MakeMultiTransformation2D", BlocksOp)
return anObj
+## Build all possible propagation groups.
+# Propagation group is a set of all edges, opposite to one (main)
+# edge of this group directly or through other opposite edges.
+# Notion of Opposite Edge make sence only on quadrangle face.
+# @param theShape Shape to build propagation groups on.
+# @return List of GEOM_Objects, each of them is a propagation group.
+#
+# Example: see GEOM_TestOthers.py
def Propagate(theShape):
- """
- * Build all possible propagation groups.
- * Propagation group is a set of all edges, opposite to one (main)
- * edge of this group directly or through other opposite edges.
- * Notion of Opposite Edge make sence only on quadrangle face.
- * \param theShape Shape to build propagation groups on.
- * \return List of GEOM_Objects, each of them is a propagation group.
-
- * Example: see GEOM_TestOthers.py
- """
listChains = BlocksOp.Propagate(theShape)
- if BlocksOp.IsDone() == 0:
- print "Propagate : ", BlocksOp.GetErrorCode()
+ RaiseIfFailed("Propagate", BlocksOp)
return listChains
# -----------------------------------------------------------------------------
# Group operations
# -----------------------------------------------------------------------------
+## Creates a new group which will store sub shapes of theMainShape
+# @param theMainShape is a GEOM object on which the group is selected
+# @param theShapeType defines a shape type of the group
+# @return a newly created GEOM group
+#
+# Example: see GEOM_TestOthers.py
def CreateGroup(theMainShape, theShapeType):
- """
- * Creates a new group which will store sub shapes of theMainShape
- * \param theMainShape is a GEOM object on which the group is selected
- * \param theShapeType defines a shape type of the group
- * \return a newly created GEOM group
-
- * Example: see GEOM_TestOthers.py
- """
anObj = GroupOp.CreateGroup(theMainShape, theShapeType)
- if GroupOp.IsDone() == 0:
- print "CreateGroup : ", GroupOp.GetErrorCode()
+ RaiseIfFailed("CreateGroup", GroupOp)
return anObj
+## Adds a sub object with ID theSubShapeId to the group
+# @param theGroup is a GEOM group to which the new sub shape is added
+# @param theSubShapeID is a sub shape ID in the main object.
+# \note Use method GetSubShapeID() to get an unique ID of the sub shape
+#
+# Example: see GEOM_TestOthers.py
def AddObject(theGroup, theSubShapeID):
- """
- * Adds a sub object with ID theSubShapeId to the group
- * \param theGroup is a GEOM group to which the new sub shape is added
- * \param theSubShapeID is a sub shape ID in the main object.
- * \note Use method GetSubShapeID() to get an unique ID of the sub shape
-
- * Example: see GEOM_TestOthers.py
- """
GroupOp.AddObject(theGroup, theSubShapeID)
- if GroupOp.IsDone() == 0:
- print "AddObject : ", GroupOp.GetErrorCode()
+ RaiseIfFailed("AddObject", GroupOp)
+## Removes a sub object with ID \a theSubShapeId from the group
+# @param theGroup is a GEOM group from which the new sub shape is removed
+# @param theSubShapeID is a sub shape ID in the main object.
+# \note Use method GetSubShapeID() to get an unique ID of the sub shape
+#
+# Example: see GEOM_TestOthers.py
def RemoveObject(theGroup, theSubShapeID):
- """
- * Removes a sub object with ID \a theSubShapeId from the group
- * \param theGroup is a GEOM group from which the new sub shape is removed
- * \param theSubShapeID is a sub shape ID in the main object.
- * \note Use method GetSubShapeID() to get an unique ID of the sub shape
-
- * Example: see GEOM_TestOthers.py
- """
GroupOp.RemoveObject(theGroup, theSubShapeID)
- if GroupOp.IsDone() == 0:
- print "RemoveObject : ", GroupOp.GetErrorCode()
+ RaiseIfFailed("RemoveObject", GroupOp)
+## Adds to the group all the given shapes. No errors, if some shapes are alredy included.
+# @param theGroup is a GEOM group to which the new sub shapes are added.
+# @param theSubShapes is a list of sub shapes to be added.
+#
+# Example: see GEOM_TestOthers.py
def UnionList (theGroup, theSubShapes):
- """
- * Adds to the group all the given shapes. No errors, if some shapes are alredy included.
- * \param theGroup is a GEOM group to which the new sub shapes are added.
- * \param theSubShapes is a list of sub shapes to be added.
-
- * Example: see GEOM_TestOthers.py
- """
GroupOp.UnionList(theGroup, theSubShapes)
- if GroupOp.IsDone() == 0:
- print "UnionList : ", GroupOp.GetErrorCode()
+ RaiseIfFailed("UnionList", GroupOp)
+## Works like the above method, but argument
+# theSubShapes here is a list of sub-shapes indices
+#
+# Example: see GEOM_TestOthers.py
+def UnionIDs(theGroup, theSubShapes):
+ GroupOp.UnionIDs(theGroup, theSubShapes)
+ RaiseIfFailed("UnionIDs", GroupOp)
+
+## Removes from the group all the given shapes. No errors, if some shapes are not included.
+# @param theGroup is a GEOM group from which the sub-shapes are removed.
+# @param theSubShapes is a list of sub-shapes to be removed.
+#
+# Example: see GEOM_TestOthers.py
def DifferenceList (theGroup, theSubShapes):
- """
- * Removes from the group all the given shapes. No errors, if some shapes are not included.
- * \param theGroup is a GEOM group from which the sub-shapes are removed.
- * \param theSubShapes is a list of sub-shapes to be removed.
-
- * Example: see GEOM_TestOthers.py
- """
GroupOp.DifferenceList(theGroup, theSubShapes)
- if GroupOp.IsDone() == 0:
- print "DifferenceList : ", GroupOp.GetErrorCode()
+ RaiseIfFailed("DifferenceList", GroupOp)
-def GetObjectIDs(theGroup):
- """
- * Returns a list of sub objects ID stored in the group
- * \param theGroup is a GEOM group for which a list of IDs is requested
+## Works like the above method, but argument
+# theSubShapes here is a list of sub-shapes indices
+#
+# Example: see GEOM_TestOthers.py
+def DifferenceIDs(theGroup, theSubShapes):
+ GroupOp.DifferenceIDs(theGroup, theSubShapes)
+ RaiseIfFailed("DifferenceIDs", GroupOp)
- * Example: see GEOM_TestOthers.py
- """
+## Returns a list of sub objects ID stored in the group
+# @param theGroup is a GEOM group for which a list of IDs is requested
+#
+# Example: see GEOM_TestOthers.py
+def GetObjectIDs(theGroup):
ListIDs = GroupOp.GetObjects(theGroup)
- if GroupOp.IsDone() == 0:
- print "GetObjectIDs : ", GroupOp.GetErrorCode()
+ RaiseIfFailed("GetObjects", GroupOp)
return ListIDs
+## Returns a type of sub objects stored in the group
+# @param theGroup is a GEOM group which type is returned.
+#
+# Example: see GEOM_TestOthers.py
def GetType(theGroup):
- """
- * Returns a type of sub objects stored in the group
- * \param theGroup is a GEOM group which type is returned.
-
- * Example: see GEOM_TestOthers.py
- """
aType = GroupOp.GetType(theGroup)
- if GroupOp.IsDone() == 0:
- print "GetType : ", GroupOp.GetErrorCode()
+ RaiseIfFailed("GetType", GroupOp)
return aType
+## Returns a main shape associated with the group
+# @param theGroup is a GEOM group for which a main shape object is requested
+# @return a GEOM object which is a main shape for theGroup
+#
+# Example: see GEOM_TestOthers.py
def GetMainShape(theGroup):
- """
- * Returns a main shape associated with the group
- * \param theGroup is a GEOM group for which a main shape object is requested
- * \return a GEOM object which is a main shape for theGroup
-
- * Example: see GEOM_TestOthers.py
- """
anObj = GroupOp.GetMainShape(theGroup)
- if GroupOp.IsDone() == 0:
- print "GetMainShape : ", GroupOp.GetErrorCode()
+ RaiseIfFailed("GetMainShape", GroupOp)
return anObj
+## Create group of edges of theShape, whose length is in range [min_length, max_length].
+# If include_min/max == 0, edges with length == min/max_length will not be included in result.
def GetEdgesByLength (theShape, min_length, max_length, include_min = 1, include_max = 1):
- """
- Create group of edges of theShape, whose length is in range [min_length, max_length].
- If include_min/max == 0, edges with length == min/max_length will not be included in result.
- """
-
edges = SubShapeAll(theShape, ShapeType["EDGE"])
edges_in_range = []
for edge in edges:
return group_edges
+## Create group of edges of selected shape, whose length is in range [min_length, max_length].
+# If include_min/max == 0, edges with length == min/max_length will not be included in result.
def SelectEdges (min_length, max_length, include_min = 1, include_max = 1):
- """
- Create group of edges of selected shape, whose length is in range [min_length, max_length].
- If include_min/max == 0, edges with length == min/max_length will not be included in result.
- """
-
nb_selected = sg.SelectedCount()
if nb_selected < 1:
print "Select a shape before calling this function, please."
return group_edges
+## Add Path to load python scripts from
def addPath(Path):
- """
- * Add Path to load python scripts from
- """
if (sys.path.count(Path) < 1):
sys.path.append(Path)
