self.MeasuOp = None
self.BlocksOp = None
self.GroupOp = None
- self.AdvOp = None
self.FieldOp = None
pass
self.GroupOp = self.GetIGroupOperations (self.myStudyId)
self.FieldOp = self.GetIFieldOperations (self.myStudyId)
- # The below line is a right way to map all plugin functions to geomBuilder,
- # but AdvancedOperations are already mapped, that is why this line is commented
- # and presents here only as an axample
- #self.AdvOp = self.GetPluginOperations (self.myStudyId, "AdvancedEngine")
-
- # self.AdvOp is used by functions MakePipeTShape*, MakeDividedDisk, etc.
- self.AdvOp = GEOM._objref_GEOM_Gen.GetPluginOperations (self, self.myStudyId, "AdvancedEngine")
-
# set GEOM as root in the use case tree
self.myUseCaseBuilder = self.myStudy.GetUseCaseBuilder()
self.myUseCaseBuilder.SetRootCurrent()
def GetPluginOperations(self, studyID, libraryName):
op = GEOM._objref_GEOM_Gen.GetPluginOperations(self, studyID, libraryName)
- if op:
- # bind methods of operations to self
- methods = op.__class__.__dict__['__methods__']
- avoid_methods = self.BasicOp.__class__.__dict__['__methods__']
- for meth_name in methods:
- if not meth_name in avoid_methods: # avoid basic methods
- function = getattr(op.__class__, meth_name)
- if callable(function):
- #self.__dict__[meth_name] = self.__PluginOperation(op, function)
- self.__dict__[meth_name] = PluginOperation(op, function)
return op
## Enable / disable results auto-publishing
anObj.SetParameters(Parameters)
self._autoPublish(anObj, theName, "cylinder")
return anObj
+
+ ## Create a portion of cylinder with given base point, axis, radius, height and angle.
+ # @param thePnt Central point of cylinder base.
+ # @param theAxis Cylinder axis.
+ # @param theR Cylinder radius.
+ # @param theH Cylinder height.
+ # @param theA Cylinder angle in radians.
+ # @param theName Object name; when specified, this parameter is used
+ # for result publication in the study. Otherwise, if automatic
+ # publication is switched on, default value is used for result name.
+ #
+ # @return New GEOM.GEOM_Object, containing the created cylinder.
+ #
+ # @ref tui_creation_cylinder "Example"
+ @ManageTransactions("PrimOp")
+ def MakeCylinderA(self, thePnt, theAxis, theR, theH, theA, theName=None):
+ """
+ Create a a portion of cylinder with given base point, axis, radius, height and angle.
+
+ Parameters:
+ thePnt Central point of cylinder base.
+ theAxis Cylinder axis.
+ theR Cylinder radius.
+ theH Cylinder height.
+ theA Cylinder angle in radians.
+ theName Object name; when specified, this parameter is used
+ for result publication in the study. Otherwise, if automatic
+ publication is switched on, default value is used for result name.
+
+ Returns:
+ New GEOM.GEOM_Object, containing the created cylinder.
+ """
+ # Example: see GEOM_TestAll.py
+ flag = False
+ if isinstance(theA,str):
+ flag = True
+ theR,theH,theA,Parameters = ParseParameters(theR, theH, theA)
+ if flag:
+ theA = theA*math.pi/180.
+ anObj = self.PrimOp.MakeCylinderPntVecRHA(thePnt, theAxis, theR, theH, theA)
+ RaiseIfFailed("MakeCylinderPntVecRHA", self.PrimOp)
+ anObj.SetParameters(Parameters)
+ self._autoPublish(anObj, theName, "cylinder")
+ return anObj
## Create a cylinder with given radius and height at
# the origin of coordinate system. Axis of the cylinder
anObj.SetParameters(Parameters)
self._autoPublish(anObj, theName, "cylinder")
return anObj
+
+ ## Create a portion of cylinder with given radius, height and angle at
+ # the origin of coordinate system. Axis of the cylinder
+ # will be collinear to the OZ axis of the coordinate system.
+ # @param theR Cylinder radius.
+ # @param theH Cylinder height.
+ # @param theA Cylinder angle in radians.
+ # @param theName Object name; when specified, this parameter is used
+ # for result publication in the study. Otherwise, if automatic
+ # publication is switched on, default value is used for result name.
+ #
+ # @return New GEOM.GEOM_Object, containing the created cylinder.
+ #
+ # @ref tui_creation_cylinder "Example"
+ @ManageTransactions("PrimOp")
+ def MakeCylinderRHA(self, theR, theH, theA, theName=None):
+ """
+ Create a portion of cylinder with given radius, height and angle at
+ the origin of coordinate system. Axis of the cylinder
+ will be collinear to the OZ axis of the coordinate system.
+
+ Parameters:
+ theR Cylinder radius.
+ theH Cylinder height.
+ theA Cylinder angle in radians.
+ theName Object name; when specified, this parameter is used
+ for result publication in the study. Otherwise, if automatic
+ publication is switched on, default value is used for result name.
+
+ Returns:
+ New GEOM.GEOM_Object, containing the created cylinder.
+ """
+ # Example: see GEOM_TestAll.py
+ flag = False
+ if isinstance(theA,str):
+ flag = True
+ theR,theH,theA,Parameters = ParseParameters(theR, theH, theA)
+ if flag:
+ theA = theA*math.pi/180.
+ anObj = self.PrimOp.MakeCylinderRHA(theR, theH, theA)
+ RaiseIfFailed("MakeCylinderRHA", self.PrimOp)
+ anObj.SetParameters(Parameters)
+ self._autoPublish(anObj, theName, "cylinder")
+ return anObj
## Create a sphere with given center and radius.
# @param thePnt Sphere center.
return anObj
## Rotate the given object around the given axis
- # on the given angle, creating its copy before the rotatation.
+ # on the given angle, creating its copy before the rotation.
# @param theObject The object to be rotated.
# @param theAxis Rotation axis.
# @param theAngle Rotation angle in radians.
## @addtogroup l2_import_export
## @{
- ## Import a shape from the BREP or IGES or STEP file
+ ## Import a shape from the BREP, IGES, STEP or other file
# (depends on given format) with given name.
+ #
+ # Note: this function is deprecated, it is kept for backward compatibility only
+ # Use Import<FormatName> instead, where <FormatName> is a name of desirable format to import.
+ #
# @param theFileName The file, containing the shape.
# @param theFormatName Specify format for the file reading.
# Available formats can be obtained with InsertOp.ImportTranslators() method.
@ManageTransactions("InsertOp")
def ImportFile(self, theFileName, theFormatName, theName=None):
"""
- Import a shape from the BREP or IGES or STEP file
+ Import a shape from the BREP, IGES, STEP or other file
(depends on given format) with given name.
- Parameters:
+ Note: this function is deprecated, it is kept for backward compatibility only
+ Use Import<FormatName> instead, where <FormatName> is a name of desirable format to import.
+
+ Parameters:
theFileName The file, containing the shape.
theFormatName Specify format for the file reading.
Available formats can be obtained with geompy.InsertOp.ImportTranslators() method.
material groups are not automatically published.
"""
# Example: see GEOM_TestOthers.py
+ print """
+ WARNING: Function ImportFile is deprecated, use Import<FormatName> instead,
+ where <FormatName> is a name of desirable format for importing.
+ """
aListObj = self.InsertOp.ImportFile(theFileName, theFormatName)
RaiseIfFailed("ImportFile", self.InsertOp)
aNbObj = len(aListObj)
"""
Deprecated analog of geompy.ImportFile, kept for backward compatibility only.
"""
- print "WARNING: Function Import is deprecated, use ImportFile instead"
# note: auto-publishing is done in self.ImportFile()
return self.ImportFile(theFileName, theFormatName, theName)
- ## Shortcut to ImportFile() for BREP format.
- # Import a shape from the BREP file with given name.
- # @param theFileName The file, containing the shape.
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return New GEOM.GEOM_Object, containing the imported shape.
- #
- # @ref swig_Import_Export "Example"
- def ImportBREP(self, theFileName, theName=None):
- """
- geompy.ImportFile(...) function for BREP format
- Import a shape from the BREP file with given name.
-
- Parameters:
- theFileName The file, containing the shape.
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- New GEOM.GEOM_Object, containing the imported shape.
- """
- # Example: see GEOM_TestOthers.py
- # note: auto-publishing is done in self.ImportFile()
- return self.ImportFile(theFileName, "BREP", theName)
-
- ## Shortcut to ImportFile() for IGES format
- # Import a shape from the IGES file with given name.
- # @param theFileName The file, containing the shape.
- # @param ignoreUnits If True, file length units will be ignored (set to 'meter')
- # and result model will be scaled, if its units are not meters.
- # If False (default), file length units will be taken into account.
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return New GEOM.GEOM_Object, containing the imported shape.
- #
- # @ref swig_Import_Export "Example"
- def ImportIGES(self, theFileName, ignoreUnits = False, theName=None):
- """
- geompy.ImportFile(...) function for IGES format
-
- Parameters:
- theFileName The file, containing the shape.
- ignoreUnits If True, file length units will be ignored (set to 'meter')
- and result model will be scaled, if its units are not meters.
- If False (default), file length units will be taken into account.
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- New GEOM.GEOM_Object, containing the imported shape.
- """
- # Example: see GEOM_TestOthers.py
- # note: auto-publishing is done in self.ImportFile()
- if ignoreUnits:
- return self.ImportFile(theFileName, "IGES_SCALE", theName)
- return self.ImportFile(theFileName, "IGES", theName)
-
- ## Return length unit from given IGES file
- # @param theFileName The file, containing the shape.
- # @return String, containing the units name.
- #
- # @ref swig_Import_Export "Example"
- @ManageTransactions("InsertOp")
- def GetIGESUnit(self, theFileName):
- """
- Return length units from given IGES file
-
- Parameters:
- theFileName The file, containing the shape.
-
- Returns:
- String, containing the units name.
- """
- # Example: see GEOM_TestOthers.py
- aUnitName = self.InsertOp.ReadValue(theFileName, "IGES", "LEN_UNITS")
- return aUnitName
-
- ## Shortcut to ImportFile() for STEP format
- # Import a shape from the STEP file with given name.
- # @param theFileName The file, containing the shape.
- # @param ignoreUnits If True, file length units will be ignored (set to 'meter')
- # and result model will be scaled, if its units are not meters.
- # If False (default), file length units will be taken into account.
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return New GEOM.GEOM_Object, containing the imported shape.
- # If material names are imported it returns the list of
- # objects. The first one is the imported object followed by
- # material groups.
- # @note Auto publishing is allowed for the shape itself. Imported
- # material groups are not automatically published.
- #
- # @ref swig_Import_Export "Example"
- def ImportSTEP(self, theFileName, ignoreUnits = False, theName=None):
- """
- geompy.ImportFile(...) function for STEP format
-
- Parameters:
- theFileName The file, containing the shape.
- ignoreUnits If True, file length units will be ignored (set to 'meter')
- and result model will be scaled, if its units are not meters.
- If False (default), file length units will be taken into account.
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- New GEOM.GEOM_Object, containing the imported shape.
- If material names are imported it returns the list of
- objects. The first one is the imported object followed by
- material groups.
- Note:
- Auto publishing is allowed for the shape itself. Imported
- material groups are not automatically published.
- """
- # Example: see GEOM_TestOthers.py
- # note: auto-publishing is done in self.ImportFile()
- if ignoreUnits:
- return self.ImportFile(theFileName, "STEP_SCALE", theName)
- return self.ImportFile(theFileName, "STEP", theName)
-
- ## Return length unit from given IGES or STEP file
- # @param theFileName The file, containing the shape.
- # @return String, containing the units name.
- #
- # @ref swig_Import_Export "Example"
- @ManageTransactions("InsertOp")
- def GetSTEPUnit(self, theFileName):
- """
- Return length units from given STEP file
-
- Parameters:
- theFileName The file, containing the shape.
-
- Returns:
- String, containing the units name.
- """
- # Example: see GEOM_TestOthers.py
- aUnitName = self.InsertOp.ReadValue(theFileName, "STEP", "LEN_UNITS")
- return aUnitName
-
## Read a shape from the binary stream, containing its bounding representation (BRep).
# @note This method will not be dumped to the python script by DumpStudy functionality.
# @note GEOM.GEOM_Object.GetShapeStream() method can be used to obtain the shape's BRep stream.
return anObj
## Export the given shape into a file with given name.
+ #
+ # Note: this function is deprecated, it is kept for backward compatibility only
+ # Use Export<FormatName> instead, where <FormatName> is a name of desirable format to export.
+ #
# @param theObject Shape to be stored in the file.
# @param theFileName Name of the file to store the given shape in.
# @param theFormatName Specify format for the shape storage.
"""
Export the given shape into a file with given name.
- Parameters:
+ Note: this function is deprecated, it is kept for backward compatibility only
+ Use Export<FormatName> instead, where <FormatName> is a name of desirable format to export.
+
+ Parameters:
theObject Shape to be stored in the file.
theFileName Name of the file to store the given shape in.
theFormatName Specify format for the shape storage.
geompy.InsertOp.ExportTranslators()[0] method.
"""
# Example: see GEOM_TestOthers.py
+ print """
+ WARNING: Function Export is deprecated, use Export<FormatName> instead,
+ where <FormatName> is a name of desirable format for exporting.
+ """
self.InsertOp.Export(theObject, theFileName, theFormatName)
if self.InsertOp.IsDone() == 0:
raise RuntimeError, "Export : " + self.InsertOp.GetErrorCode()
pass
pass
- ## Shortcut to Export() for BREP format
- #
- # @ref swig_Import_Export "Example"
- def ExportBREP(self,theObject, theFileName):
- """
- geompy.Export(...) function for BREP format
- """
- # Example: see GEOM_TestOthers.py
- return self.Export(theObject, theFileName, "BREP")
-
- ## Shortcut to Export() for IGES format
- #
- # @ref swig_Import_Export "Example"
- def ExportIGES(self,theObject, theFileName):
- """
- geompy.Export(...) function for IGES format
- """
- # Example: see GEOM_TestOthers.py
- return self.Export(theObject, theFileName, "IGES")
-
- ## Shortcut to Export() for STEP format
- #
- # @ref swig_Import_Export "Example"
- def ExportSTEP(self,theObject, theFileName):
- """
- geompy.Export(...) function for STEP format
- """
- # Example: see GEOM_TestOthers.py
- return self.Export(theObject, theFileName, "STEP")
-
# end of l2_import_export
## @}
# end of l3_groups
## @}
- ## @addtogroup l4_advanced
- ## @{
-
- ## Create a T-shape object with specified caracteristics for the main
- # and the incident pipes (radius, width, half-length).
- # The extremities of the main pipe are located on junctions points P1 and P2.
- # The extremity of the incident pipe is located on junction point P3.
- # If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- # the main plane of the T-shape is XOY.
- #
- # @param theR1 Internal radius of main pipe
- # @param theW1 Width of main pipe
- # @param theL1 Half-length of main pipe
- # @param theR2 Internal radius of incident pipe (R2 < R1)
- # @param theW2 Width of incident pipe (R2+W2 < R1+W1)
- # @param theL2 Half-length of incident pipe
- #
- # @param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- # @param theP1 1st junction point of main pipe
- # @param theP2 2nd junction point of main pipe
- # @param theP3 Junction point of incident pipe
- #
- # @param theRL Internal radius of left thickness reduction
- # @param theWL Width of left thickness reduction
- # @param theLtransL Length of left transition part
- # @param theLthinL Length of left thin part
- #
- # @param theRR Internal radius of right thickness reduction
- # @param theWR Width of right thickness reduction
- # @param theLtransR Length of right transition part
- # @param theLthinR Length of right thin part
- #
- # @param theRI Internal radius of incident thickness reduction
- # @param theWI Width of incident thickness reduction
- # @param theLtransI Length of incident transition part
- # @param theLthinI Length of incident thin part
- #
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return List of GEOM.GEOM_Object, containing the created shape and propagation groups.
- #
- # @ref tui_creation_pipetshape "Example"
- @ManageTransactions("AdvOp")
- def MakePipeTShape (self, theR1, theW1, theL1, theR2, theW2, theL2,
- theHexMesh=True, theP1=None, theP2=None, theP3=None,
- theRL=0, theWL=0, theLtransL=0, theLthinL=0,
- theRR=0, theWR=0, theLtransR=0, theLthinR=0,
- theRI=0, theWI=0, theLtransI=0, theLthinI=0,
- theName=None):
- """
- Create a T-shape object with specified caracteristics for the main
- and the incident pipes (radius, width, half-length).
- The extremities of the main pipe are located on junctions points P1 and P2.
- The extremity of the incident pipe is located on junction point P3.
- If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- the main plane of the T-shape is XOY.
-
- Parameters:
- theR1 Internal radius of main pipe
- theW1 Width of main pipe
- theL1 Half-length of main pipe
- theR2 Internal radius of incident pipe (R2 < R1)
- theW2 Width of incident pipe (R2+W2 < R1+W1)
- theL2 Half-length of incident pipe
- theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- theP1 1st junction point of main pipe
- theP2 2nd junction point of main pipe
- theP3 Junction point of incident pipe
-
- theRL Internal radius of left thickness reduction
- theWL Width of left thickness reduction
- theLtransL Length of left transition part
- theLthinL Length of left thin part
-
- theRR Internal radius of right thickness reduction
- theWR Width of right thickness reduction
- theLtransR Length of right transition part
- theLthinR Length of right thin part
-
- theRI Internal radius of incident thickness reduction
- theWI Width of incident thickness reduction
- theLtransI Length of incident transition part
- theLthinI Length of incident thin part
-
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- List of GEOM_Object, containing the created shape and propagation groups.
-
- Example of usage:
- # create PipeTShape object
- pipetshape = geompy.MakePipeTShape(80.0, 20.0, 200.0, 50.0, 20.0, 200.0)
- # create PipeTShape object with position
- pipetshape_position = geompy.MakePipeTShape(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, True, P1, P2, P3)
- # create PipeTShape object with left thickness reduction
- pipetshape_thr = geompy.MakePipeTShape(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, theRL=60, theWL=20, theLtransL=40, theLthinL=20)
- """
- theR1, theW1, theL1, theR2, theW2, theL2, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI, Parameters = ParseParameters(theR1, theW1, theL1, theR2, theW2, theL2, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI)
- if (theP1 and theP2 and theP3):
- anObj = self.AdvOp.MakePipeTShapeTRWithPosition(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theHexMesh, theP1, theP2, theP3)
- else:
- anObj = self.AdvOp.MakePipeTShapeTR(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theHexMesh)
- RaiseIfFailed("MakePipeTShape", self.AdvOp)
- if Parameters: anObj[0].SetParameters(Parameters)
- def_names = [ "pipeTShape" ] + [ "pipeTShape_grp_%d" % i for i in range(1, len(anObj)) ]
- self._autoPublish(anObj, _toListOfNames(theName, len(anObj)), def_names)
- return anObj
-
- ## Create a T-shape object with chamfer and with specified caracteristics for the main
- # and the incident pipes (radius, width, half-length). The chamfer is
- # created on the junction of the pipes.
- # The extremities of the main pipe are located on junctions points P1 and P2.
- # The extremity of the incident pipe is located on junction point P3.
- # If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- # the main plane of the T-shape is XOY.
- # @param theR1 Internal radius of main pipe
- # @param theW1 Width of main pipe
- # @param theL1 Half-length of main pipe
- # @param theR2 Internal radius of incident pipe (R2 < R1)
- # @param theW2 Width of incident pipe (R2+W2 < R1+W1)
- # @param theL2 Half-length of incident pipe
- # @param theH Height of the chamfer.
- # @param theW Width of the chamfer.
- # @param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- # @param theP1 1st junction point of main pipe
- # @param theP2 2nd junction point of main pipe
- # @param theP3 Junction point of incident pipe
- #
- # @param theRL Internal radius of left thickness reduction
- # @param theWL Width of left thickness reduction
- # @param theLtransL Length of left transition part
- # @param theLthinL Length of left thin part
- #
- # @param theRR Internal radius of right thickness reduction
- # @param theWR Width of right thickness reduction
- # @param theLtransR Length of right transition part
- # @param theLthinR Length of right thin part
- #
- # @param theRI Internal radius of incident thickness reduction
- # @param theWI Width of incident thickness reduction
- # @param theLtransI Length of incident transition part
- # @param theLthinI Length of incident thin part
- #
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return List of GEOM.GEOM_Object, containing the created shape and propagation groups.
- #
- # @ref tui_creation_pipetshape "Example"
- @ManageTransactions("AdvOp")
- def MakePipeTShapeChamfer (self, theR1, theW1, theL1, theR2, theW2, theL2,
- theH, theW, theHexMesh=True, theP1=None, theP2=None, theP3=None,
- theRL=0, theWL=0, theLtransL=0, theLthinL=0,
- theRR=0, theWR=0, theLtransR=0, theLthinR=0,
- theRI=0, theWI=0, theLtransI=0, theLthinI=0,
- theName=None):
- """
- Create a T-shape object with chamfer and with specified caracteristics for the main
- and the incident pipes (radius, width, half-length). The chamfer is
- created on the junction of the pipes.
- The extremities of the main pipe are located on junctions points P1 and P2.
- The extremity of the incident pipe is located on junction point P3.
- If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- the main plane of the T-shape is XOY.
-
- Parameters:
- theR1 Internal radius of main pipe
- theW1 Width of main pipe
- theL1 Half-length of main pipe
- theR2 Internal radius of incident pipe (R2 < R1)
- theW2 Width of incident pipe (R2+W2 < R1+W1)
- theL2 Half-length of incident pipe
- theH Height of the chamfer.
- theW Width of the chamfer.
- theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- theP1 1st junction point of main pipe
- theP2 2nd junction point of main pipe
- theP3 Junction point of incident pipe
-
- theRL Internal radius of left thickness reduction
- theWL Width of left thickness reduction
- theLtransL Length of left transition part
- theLthinL Length of left thin part
-
- theRR Internal radius of right thickness reduction
- theWR Width of right thickness reduction
- theLtransR Length of right transition part
- theLthinR Length of right thin part
-
- theRI Internal radius of incident thickness reduction
- theWI Width of incident thickness reduction
- theLtransI Length of incident transition part
- theLthinI Length of incident thin part
-
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- List of GEOM_Object, containing the created shape and propagation groups.
-
- Example of usage:
- # create PipeTShape with chamfer object
- pipetshapechamfer = geompy.MakePipeTShapeChamfer(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 20.0, 20.0)
- # create PipeTShape with chamfer object with position
- pipetshapechamfer_position = geompy.MakePipeTShapeChamfer(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 20.0, 20.0, True, P1, P2, P3)
- # create PipeTShape with chamfer object with left thickness reduction
- pipetshapechamfer_thr = geompy.MakePipeTShapeChamfer(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 20.0, 20.0, theRL=60, theWL=20, theLtransL=40, theLthinL=20)
- """
- theR1, theW1, theL1, theR2, theW2, theL2, theH, theW, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI, Parameters = ParseParameters(theR1, theW1, theL1, theR2, theW2, theL2, theH, theW, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI)
- if (theP1 and theP2 and theP3):
- anObj = self.AdvOp.MakePipeTShapeTRChamferWithPosition(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theH, theW, theHexMesh, theP1, theP2, theP3)
- else:
- anObj = self.AdvOp.MakePipeTShapeTRChamfer(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theH, theW, theHexMesh)
- RaiseIfFailed("MakePipeTShapeChamfer", self.AdvOp)
- if Parameters: anObj[0].SetParameters(Parameters)
- def_names = [ "pipeTShape" ] + [ "pipeTShape_grp_%d" % i for i in range(1, len(anObj)) ]
- self._autoPublish(anObj, _toListOfNames(theName, len(anObj)), def_names)
- return anObj
-
- ## Create a T-shape object with fillet and with specified caracteristics for the main
- # and the incident pipes (radius, width, half-length). The fillet is
- # created on the junction of the pipes.
- # The extremities of the main pipe are located on junctions points P1 and P2.
- # The extremity of the incident pipe is located on junction point P3.
- # If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- # the main plane of the T-shape is XOY.
- # @param theR1 Internal radius of main pipe
- # @param theW1 Width of main pipe
- # @param theL1 Half-length of main pipe
- # @param theR2 Internal radius of incident pipe (R2 < R1)
- # @param theW2 Width of incident pipe (R2+W2 < R1+W1)
- # @param theL2 Half-length of incident pipe
- # @param theRF Radius of curvature of fillet.
- # @param theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- # @param theP1 1st junction point of main pipe
- # @param theP2 2nd junction point of main pipe
- # @param theP3 Junction point of incident pipe
- #
- # @param theRL Internal radius of left thickness reduction
- # @param theWL Width of left thickness reduction
- # @param theLtransL Length of left transition part
- # @param theLthinL Length of left thin part
- #
- # @param theRR Internal radius of right thickness reduction
- # @param theWR Width of right thickness reduction
- # @param theLtransR Length of right transition part
- # @param theLthinR Length of right thin part
- #
- # @param theRI Internal radius of incident thickness reduction
- # @param theWI Width of incident thickness reduction
- # @param theLtransI Length of incident transition part
- # @param theLthinI Length of incident thin part
- #
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return List of GEOM.GEOM_Object, containing the created shape and propagation groups.
- #
- # @ref tui_creation_pipetshape "Example"
- @ManageTransactions("AdvOp")
- def MakePipeTShapeFillet (self, theR1, theW1, theL1, theR2, theW2, theL2,
- theRF, theHexMesh=True, theP1=None, theP2=None, theP3=None,
- theRL=0, theWL=0, theLtransL=0, theLthinL=0,
- theRR=0, theWR=0, theLtransR=0, theLthinR=0,
- theRI=0, theWI=0, theLtransI=0, theLthinI=0,
- theName=None):
- """
- Create a T-shape object with fillet and with specified caracteristics for the main
- and the incident pipes (radius, width, half-length). The fillet is
- created on the junction of the pipes.
- The extremities of the main pipe are located on junctions points P1 and P2.
- The extremity of the incident pipe is located on junction point P3.
-
- Parameters:
- If P1, P2 and P3 are not given, the center of the shape is (0,0,0) and
- the main plane of the T-shape is XOY.
- theR1 Internal radius of main pipe
- theW1 Width of main pipe
- heL1 Half-length of main pipe
- theR2 Internal radius of incident pipe (R2 < R1)
- theW2 Width of incident pipe (R2+W2 < R1+W1)
- theL2 Half-length of incident pipe
- theRF Radius of curvature of fillet.
- theHexMesh Boolean indicating if shape is prepared for hex mesh (default=True)
- theP1 1st junction point of main pipe
- theP2 2nd junction point of main pipe
- theP3 Junction point of incident pipe
-
- theRL Internal radius of left thickness reduction
- theWL Width of left thickness reduction
- theLtransL Length of left transition part
- theLthinL Length of left thin part
-
- theRR Internal radius of right thickness reduction
- theWR Width of right thickness reduction
- theLtransR Length of right transition part
- theLthinR Length of right thin part
-
- theRI Internal radius of incident thickness reduction
- theWI Width of incident thickness reduction
- theLtransI Length of incident transition part
- theLthinI Length of incident thin part
-
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- List of GEOM_Object, containing the created shape and propagation groups.
-
- Example of usage:
- # create PipeTShape with fillet object
- pipetshapefillet = geompy.MakePipeTShapeFillet(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 5.0)
- # create PipeTShape with fillet object with position
- pipetshapefillet_position = geompy.MakePipeTShapeFillet(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 5.0, True, P1, P2, P3)
- # create PipeTShape with fillet object with left thickness reduction
- pipetshapefillet_thr = geompy.MakePipeTShapeFillet(80.0, 20.0, 200.0, 50.0, 20.0, 200.0, 5.0, theRL=60, theWL=20, theLtransL=40, theLthinL=20)
- """
- theR1, theW1, theL1, theR2, theW2, theL2, theRF, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI, Parameters = ParseParameters(theR1, theW1, theL1, theR2, theW2, theL2, theRF, theRL, theWL, theLtransL, theLthinL, theRR, theWR, theLtransR, theLthinR, theRI, theWI, theLtransI, theLthinI)
- if (theP1 and theP2 and theP3):
- anObj = self.AdvOp.MakePipeTShapeTRFilletWithPosition(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theRF, theHexMesh, theP1, theP2, theP3)
- else:
- anObj = self.AdvOp.MakePipeTShapeTRFillet(theR1, theW1, theL1, theR2, theW2, theL2,
- theRL, theWL, theLtransL, theLthinL,
- theRR, theWR, theLtransR, theLthinR,
- theRI, theWI, theLtransI, theLthinI,
- theRF, theHexMesh)
- RaiseIfFailed("MakePipeTShapeFillet", self.AdvOp)
- if Parameters: anObj[0].SetParameters(Parameters)
- def_names = [ "pipeTShape" ] + [ "pipeTShape_grp_%d" % i for i in range(1, len(anObj)) ]
- self._autoPublish(anObj, _toListOfNames(theName, len(anObj)), def_names)
- return anObj
-
- ## This function allows creating a disk already divided into blocks. It
- # can be used to create divided pipes for later meshing in hexaedra.
- # @param theR Radius of the disk
- # @param theOrientation Orientation of the plane on which the disk will be built
- # 1 = XOY, 2 = OYZ, 3 = OZX
- # @param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return New GEOM_Object, containing the created shape.
- #
- # @ref tui_creation_divideddisk "Example"
- @ManageTransactions("AdvOp")
- def MakeDividedDisk(self, theR, theOrientation, thePattern, theName=None):
- """
- Creates a disk, divided into blocks. It can be used to create divided pipes
- for later meshing in hexaedra.
-
- Parameters:
- theR Radius of the disk
- theOrientation Orientation of the plane on which the disk will be built:
- 1 = XOY, 2 = OYZ, 3 = OZX
- thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- New GEOM_Object, containing the created shape.
- """
- theR, Parameters = ParseParameters(theR)
- anObj = self.AdvOp.MakeDividedDisk(theR, 67.0, theOrientation, thePattern)
- RaiseIfFailed("MakeDividedDisk", self.AdvOp)
- if Parameters: anObj.SetParameters(Parameters)
- self._autoPublish(anObj, theName, "dividedDisk")
- return anObj
-
- ## This function allows creating a disk already divided into blocks. It
- # can be used to create divided pipes for later meshing in hexaedra.
- # @param theCenter Center of the disk
- # @param theVector Normal vector to the plane of the created disk
- # @param theRadius Radius of the disk
- # @param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return New GEOM_Object, containing the created shape.
- #
- # @ref tui_creation_divideddisk "Example"
- @ManageTransactions("AdvOp")
- def MakeDividedDiskPntVecR(self, theCenter, theVector, theRadius, thePattern, theName=None):
- """
- Creates a disk already divided into blocks. It can be used to create divided pipes
- for later meshing in hexaedra.
-
- Parameters:
- theCenter Center of the disk
- theVector Normal vector to the plane of the created disk
- theRadius Radius of the disk
- thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- New GEOM_Object, containing the created shape.
- """
- theRadius, Parameters = ParseParameters(theRadius)
- anObj = self.AdvOp.MakeDividedDiskPntVecR(theCenter, theVector, theRadius, 67.0, thePattern)
- RaiseIfFailed("MakeDividedDiskPntVecR", self.AdvOp)
- if Parameters: anObj.SetParameters(Parameters)
- self._autoPublish(anObj, theName, "dividedDisk")
- return anObj
-
- ## Builds a cylinder prepared for hexa meshes
- # @param theR Radius of the cylinder
- # @param theH Height of the cylinder
- # @param thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- #
- # @return New GEOM_Object, containing the created shape.
- #
- # @ref tui_creation_dividedcylinder "Example"
- @ManageTransactions("AdvOp")
- def MakeDividedCylinder(self, theR, theH, thePattern, theName=None):
- """
- Builds a cylinder prepared for hexa meshes
-
- Parameters:
- theR Radius of the cylinder
- theH Height of the cylinder
- thePattern Division pattern. It can be GEOM.SQUARE or GEOM.HEXAGON
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- New GEOM_Object, containing the created shape.
- """
- theR, theH, Parameters = ParseParameters(theR, theH)
- anObj = self.AdvOp.MakeDividedCylinder(theR, theH, thePattern)
- RaiseIfFailed("MakeDividedCylinder", self.AdvOp)
- if Parameters: anObj.SetParameters(Parameters)
- self._autoPublish(anObj, theName, "dividedCylinder")
- return anObj
-
- ## Create a surface from a cloud of points
- # @param thelPoints list of points. Compounds of points are
- # accepted as well.
- # @param theNbMax maximum number of Bezier pieces in the resulting
- # surface.
- # @param theDegMax maximum degree of the resulting BSpline surface.
- # @param theDMax 3D tolerance of initial approximation.
- # @param theName Object name; when specified, this parameter is used
- # for result publication in the study. Otherwise, if automatic
- # publication is switched on, default value is used for result name.
- # @return New GEOM_Object, containing the created shape.
- # @note 3D tolerance of initial approximation represents a tolerance of
- # initial plate surface approximation. If this parameter is equal
- # to 0 (default value) it is computed. In this case an error of
- # initial plate surface computation is used as the approximation
- # tolerance. This error represents a maximal distance between
- # computed plate surface and given points.
- #
- # @ref tui_creation_smoothingsurface "Example"
- @ManageTransactions("AdvOp")
- def MakeSmoothingSurface(self, thelPoints, theNbMax=2, theDegMax=8,
- theDMax=0.0, theName=None):
- """
- Create a surface from a cloud of points
-
- Parameters:
- thelPoints list of points. Compounds of points are
- accepted as well.
- theNbMax maximum number of Bezier pieces in the resulting
- surface.
- theDegMax maximum degree of the resulting BSpline surface.
- theDMax 3D tolerance of initial approximation.
- theName Object name; when specified, this parameter is used
- for result publication in the study. Otherwise, if automatic
- publication is switched on, default value is used for result name.
-
- Returns:
- New GEOM_Object, containing the created shape.
-
- Note:
- 3D tolerance of initial approximation represents a tolerance of
- initial plate surface approximation. If this parameter is equal
- to 0 (default value) it is computed. In this case an error of
- initial plate surface computation is used as the approximation
- tolerance. This error represents a maximal distance between
- computed plate surface and given points.
- """
- anObj = self.AdvOp.MakeSmoothingSurface(thelPoints, theNbMax,
- theDegMax, theDMax)
- RaiseIfFailed("MakeSmoothingSurface", self.AdvOp)
- self._autoPublish(anObj, theName, "smoothing")
- return anObj
-
- ## Export a shape to XAO format
- # @param shape The shape to export
- # @param groups The list of groups to export
- # @param fields The list of fields to export
- # @param author The author of the export
- # @param fileName The name of the file to export
- # @return boolean
- #
- # @ref tui_exportxao "Example"
- @ManageTransactions("InsertOp")
- def ExportXAO(self, shape, groups, fields, author, fileName):
- res = self.InsertOp.ExportXAO(shape, groups, fields, author, fileName)
- RaiseIfFailed("ExportXAO", self.InsertOp)
- return res
-
- ## Import a shape from XAO format
- # @param shape Shape to export
- # @param fileName The name of the file to import
- # @return tuple (res, shape, subShapes, groups, fields)
- # res Flag indicating if the import was successful
- # shape The imported shape
- # subShapes The list of imported subShapes
- # groups The list of imported groups
- # fields The list of imported fields
- #
- # @ref tui_importxao "Example"
- @ManageTransactions("InsertOp")
- def ImportXAO(self, fileName):
- res = self.InsertOp.ImportXAO(fileName)
- RaiseIfFailed("ImportXAO", self.InsertOp)
- return res
-
#@@ insert new functions before this line @@ do not remove this line @@#
- # end of l4_advanced
- ## @}
-
## Create a copy of the given object
#
# @param theOriginal geometry object for copy
assert isinstance(geom,geomBuilder), "Geom engine class is %s but should be geomBuilder.geomBuilder. Import geomBuilder before creating the instance."%geom.__class__
geom.init_geom(study)
return geom
+
+
+# Register methods from the plug-ins in the geomBuilder class
+plugins_var = os.environ.get( "GEOM_PluginsList" )
+
+plugins = None
+if plugins_var is not None:
+ plugins = plugins_var.split( ":" )
+ plugins=filter(lambda x: len(x)>0, plugins)
+if plugins is not None:
+ for pluginName in plugins:
+ pluginBuilderName = pluginName + "Builder"
+ try:
+ exec( "from salome.%s.%s import *" % (pluginName, pluginBuilderName))
+ except Exception, e:
+ from salome_utils import verbose
+ print "Exception while loading %s: %s" % ( pluginBuilderName, e )
+ continue
+ exec( "from salome.%s import %s" % (pluginName, pluginBuilderName))
+ plugin = eval( pluginBuilderName )
+
+ # add methods from plugin module to the geomBuilder class
+ for k in dir( plugin ):
+ if k[0] == '_': continue
+ method = getattr( plugin, k )
+ if type( method ).__name__ == 'function':
+ if not hasattr( geomBuilder, k ):
+ setattr( geomBuilder, k, method )
+ pass
+ pass
+ del pluginName
+ pass
+ pass
