# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2021 CEA/DEN, EDF R&D, OPEN CASCADE
#
# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# Geometrie du cas test
#
import salome
-from geompy import *
+salome.salome_init()
+import GEOM
+from salome.geom import geomBuilder
+geompy = geomBuilder.New()
#
# base de l'assemblage
h_base = 75.
e_base = 6.
-base_bot = MakeBox(0.,0.,0.,L_base,l_base,e_base)
-base_top = MakeTranslation(base_bot,0.,0.,h_base-e_base)
-base_front = MakeBox(0,0,0,L_base,e_base,h_base)
-base_rear = MakeTranslation(base_front,0.,l_base,0.)
+base_bot = geompy.MakeBox(0.,0.,0.,L_base,l_base,e_base)
+base_top = geompy.MakeTranslation(base_bot,0.,0.,h_base-e_base)
+base_front = geompy.MakeBox(0,0,0,L_base,e_base,h_base)
+base_rear = geompy.MakeTranslation(base_front,0.,l_base,0.)
-tmp = MakeBoolean(base_top,base_rear,3)
-tmp = MakeBoolean(tmp,base_bot,3)
-base = MakeBoolean(tmp,base_front,3)
+tmp = geompy.MakeBoolean(base_top,base_rear,3)
+tmp = geompy.MakeBoolean(tmp,base_bot,3)
+base = geompy.MakeBoolean(tmp,base_front,3)
-addToStudy(base,"base")
+geompy.addToStudy(base,"base")
#
# traverse
#
e_trav = 7.
marge = 15.
-flange_left = MakeBox(0.,0.,0,e_trav,L_trav,h_trav)
-flange_right = MakeTranslation(flange_left,L_trav-e_trav,0.,0.)
-flange_front = MakeBox(0.,0.,0,L_trav,e_trav,h_trav)
-flange_rear = MakeTranslation(flange_front,0.,L_trav-e_trav,0.)
+flange_left = geompy.MakeBox(0.,0.,0,e_trav,L_trav,h_trav)
+flange_right = geompy.MakeTranslation(flange_left,L_trav-e_trav,0.,0.)
+flange_front = geompy.MakeBox(0.,0.,0,L_trav,e_trav,h_trav)
+flange_rear = geompy.MakeTranslation(flange_front,0.,L_trav-e_trav,0.)
-tmp = MakeBoolean(flange_left,flange_rear,3)
-tmp = MakeBoolean(tmp,flange_right,3)
-flange = MakeBoolean(tmp,flange_front,3)
+tmp = geompy.MakeBoolean(flange_left,flange_rear,3)
+tmp = geompy.MakeBoolean(tmp,flange_right,3)
+flange = geompy.MakeBoolean(tmp,flange_front,3)
#
# left chamfer
#
import math
length = e_trav/math.sin(math.pi/4.)
-p1 = MakeVertex(0,0,0)
-p2 = MakeVertex(0,1,0)
-yaxis = MakeVector(p1, p2)
-cut_left = MakeBox(0.,-marge,0.,-length,L_trav+marge,length)
-cut_left = MakeRotation(cut_left,yaxis,-math.pi/4.)
-cut_left = MakeTranslation(cut_left,e_trav,0.,0.)
+p1 = geompy.MakeVertex(0,0,0)
+p2 = geompy.MakeVertex(0,1,0)
+yaxis = geompy.MakeVector(p1, p2)
+cut_left = geompy.MakeBox(0.,-marge,0.,-length,L_trav+marge,length)
+cut_left = geompy.MakeRotation(cut_left,yaxis,-math.pi/4.)
+cut_left = geompy.MakeTranslation(cut_left,e_trav,0.,0.)
#
# right chamfer
#
-symPlaneYZ = MakePlane(
- MakeVertex(L_trav/2.,0.,0.),
- MakeVector(p1,MakeVertex(1.,0.,0.)), 10000. )
-cut_right = MakeMirrorByPlane(cut_left,symPlaneYZ)
+symPlaneYZ = geompy.MakePlane(
+ geompy.MakeVertex(L_trav/2.,0.,0.),
+ geompy.MakeVector(p1,geompy.MakeVertex(1.,0.,0.)), 10000. )
+cut_right = geompy.MakeMirrorByPlane(cut_left,symPlaneYZ)
#
# front chamfer
#
-xaxis = MakeVector(p1,MakeVertex(1.,0.,0.))
-cut_front = MakeBox(-marge,0.,0.,L_trav+marge,length,length)
-cut_front = MakeRotation(cut_front,xaxis,3.*math.pi/4.)
-cut_front = MakeTranslation(cut_front,0.,e_trav,0.)
+xaxis = geompy.MakeVector(p1,geompy.MakeVertex(1.,0.,0.))
+cut_front = geompy.MakeBox(-marge,0.,0.,L_trav+marge,length,length)
+cut_front = geompy.MakeRotation(cut_front,xaxis,3.*math.pi/4.)
+cut_front = geompy.MakeTranslation(cut_front,0.,e_trav,0.)
#
# rear chamfer
#
-symPlaneXZ = MakePlane(
- MakeVertex(0.,L_trav/2.,0.),
- MakeVector(p1,MakeVertex(0.,1.,0.)), 10000. )
-cut_rear = MakeMirrorByPlane(cut_front,symPlaneXZ)
+symPlaneXZ = geompy.MakePlane(
+ geompy.MakeVertex(0.,L_trav/2.,0.),
+ geompy.MakeVector(p1,geompy.MakeVertex(0.,1.,0.)), 10000. )
+cut_rear = geompy.MakeMirrorByPlane(cut_front,symPlaneXZ)
#
# chamfer
#
-trav = MakeBoolean(flange,cut_left,2)
-trav = MakeBoolean(trav,cut_right,2)
-trav = MakeBoolean(trav,cut_front,2)
-trav = MakeBoolean(trav,cut_rear,2)
-trav = MakeTranslation(trav,
+trav = geompy.MakeBoolean(flange,cut_left,2)
+trav = geompy.MakeBoolean(trav,cut_right,2)
+trav = geompy.MakeBoolean(trav,cut_front,2)
+trav = geompy.MakeBoolean(trav,cut_rear,2)
+trav = geompy.MakeTranslation(trav,
L_base/2.-L_trav/2.,
l_base/2.-L_trav/2.,
h_base)
-addToStudy(trav,"trav")
+geompy.addToStudy(trav,"trav")
#
# Welding
#
-ground = MakeBox(-1000.,-1000.,0.,1000.,1000.,-1000.)
-weld_left = MakeBoolean(cut_left,ground,2)
-weld_right = MakeBoolean(cut_right,ground,2)
-weld_front = MakeBoolean(cut_front,ground,2)
-weld_rear = MakeBoolean(cut_rear,ground,2)
+ground = geompy.MakeBox(-1000.,-1000.,0.,1000.,1000.,-1000.)
+weld_left = geompy.MakeBoolean(cut_left,ground,2)
+weld_right = geompy.MakeBoolean(cut_right,ground,2)
+weld_front = geompy.MakeBoolean(cut_front,ground,2)
+weld_rear = geompy.MakeBoolean(cut_rear,ground,2)
#
# Assembly
#
-coarse_weld = MakeBoolean(weld_left,weld_rear,3)
-coarse_weld = MakeBoolean(coarse_weld,weld_right,3)
-coarse_weld = MakeBoolean(coarse_weld,weld_front,3)
+coarse_weld = geompy.MakeBoolean(weld_left,weld_rear,3)
+coarse_weld = geompy.MakeBoolean(coarse_weld,weld_right,3)
+coarse_weld = geompy.MakeBoolean(coarse_weld,weld_front,3)
#
# Cleaners
#
-left_cleaner = MakeBox(0.,-10*marge,0.,-10.*marge,10.*marge,10.*marge)
-left_cleaner = MakeRotation(left_cleaner,yaxis,math.pi/4.)
-left_cleaner = MakeTranslation(left_cleaner,-e_trav-2.*marge,0.,-2.*marge)
+left_cleaner = geompy.MakeBox(0.,-10*marge,0.,-10.*marge,10.*marge,10.*marge)
+left_cleaner = geompy.MakeRotation(left_cleaner,yaxis,math.pi/4.)
+left_cleaner = geompy.MakeTranslation(left_cleaner,-e_trav-2.*marge,0.,-2.*marge)
-right_cleaner = MakeMirrorByPlane(left_cleaner,symPlaneYZ)
+right_cleaner = geompy.MakeMirrorByPlane(left_cleaner,symPlaneYZ)
-front_cleaner = MakeBox(-10*marge,0.,0.,10.*marge,10.*marge,10.*marge)
-front_cleaner = MakeRotation(front_cleaner,xaxis,3.*math.pi/4.)
-front_cleaner = MakeTranslation(front_cleaner,0.,2.*marge-e_trav,2.*marge)
+front_cleaner = geompy.MakeBox(-10*marge,0.,0.,10.*marge,10.*marge,10.*marge)
+front_cleaner = geompy.MakeRotation(front_cleaner,xaxis,3.*math.pi/4.)
+front_cleaner = geompy.MakeTranslation(front_cleaner,0.,2.*marge-e_trav,2.*marge)
-rear_cleaner = MakeMirrorByPlane(front_cleaner,symPlaneXZ)
+rear_cleaner = geompy.MakeMirrorByPlane(front_cleaner,symPlaneXZ)
#
# Welding
#
-weld = MakeBoolean(coarse_weld,left_cleaner,2)
-weld = MakeBoolean(weld,rear_cleaner,2)
-weld = MakeBoolean(weld,right_cleaner,2)
-weld = MakeBoolean(weld,front_cleaner,2)
-weld = MakeTranslation(weld,
+weld = geompy.MakeBoolean(coarse_weld,left_cleaner,2)
+weld = geompy.MakeBoolean(weld,rear_cleaner,2)
+weld = geompy.MakeBoolean(weld,right_cleaner,2)
+weld = geompy.MakeBoolean(weld,front_cleaner,2)
+weld = geompy.MakeTranslation(weld,
L_base/2.-L_trav/2.,
l_base/2.-L_trav/2.,
h_base)
-weldId = addToStudy(weld,"weld")
+weldId = geompy.addToStudy(weld,"weld")
#
# Assembly
#
-assemblage = Partition([base ,weld ,trav])
-assemblageId = addToStudy(assemblage, "assemblage")
-salome.sg.updateObjBrowser(1)
+assemblage = geompy.Partition([base ,weld ,trav])
+assemblageId = geompy.addToStudy(assemblage, "assemblage")
+salome.sg.updateObjBrowser()
#
# Display
#
