tan_on_face = geompy.MakeTangentPlaneOnFace(tan_extrusion, 0.7, 0.5, 150)
#Create base geometry 3D
- Box = geompy.MakeBoxTwoPnt(p0, p200) #(2 GEOM_Object)->GEOM_Object
- Box1 = geompy.MakeBoxDXDYDZ(10, 20, 30) #(3 Doubles)->GEOM_Object
- Box2 = geompy.MakeBox(10,20,30, 15,25,35) #(6 Doubles)->GEOM_Object
- Cylinder = geompy.MakeCylinder(p0, vz, radius1, height) #(2 GEOM_Object, 2 Doubles)->GEOM_Object
- Cyl1 = geompy.MakeCylinderRH(radius2, height) #(2 Doubles)->GEOM_Object
- Cylinder1= geompy.MakeCylinderA(p0, vz, radius1, height,angle1) #(2 GEOM_Object, 2 Doubles)->GEOM_Object
- Cyl2 = geompy.MakeCylinderRHA(radius2, height,angle2) #(2 Doubles)->GEOM_Object
- Sphere = geompy.MakeSpherePntR(p0, radius1) #(GEOM_Object, Double)->GEOM_Object
- Sphere1 = geompy.MakeSphereR(radius) #(Double)->GEOM_Object
- Sphere2 = geompy.MakeSphere(50, 70, 30, radius) #(4 Doubles)->GEOM_Object
- Cone = geompy.MakeCone(p0, vz, radius2, radius, height) #(2 GEOM_Object, 3 Doubles)->GEOM_Object
- Cone1 = geompy.MakeConeR1R2H(radius1, radius, height) #(3 Doubles)->GEOM_Object
- Torus = geompy.MakeTorus(p0, vz, radius2, radius) #(2 GEOM_Object, 2 Doubles)->GEOM_Object
- Torus1 = geompy.MakeTorusRR(radius2, radius1) #(2 Doubles)->GEOM_Object
+ Box = geompy.MakeBoxTwoPnt(p0, p200) #(2 GEOM_Object)->GEOM_Object
+ Box1 = geompy.MakeBoxDXDYDZ(10, 20, 30) #(3 Doubles)->GEOM_Object
+ Box2 = geompy.MakeBox(10,20,30, 15,25,35) #(6 Doubles)->GEOM_Object
+ Cylinder = geompy.MakeCylinder(p0, vz, radius1, height) #(2 GEOM_Object, 2 Doubles)->GEOM_Object
+ Cyl1 = geompy.MakeCylinderRH(radius2, height) #(2 Doubles)->GEOM_Object
+ Cylinder1= geompy.MakeCylinderA(p0, vz, radius1, height, angle1) #(2 GEOM_Object, 3 Doubles)->GEOM_Object
+ Cyl2 = geompy.MakeCylinderRHA(radius2, height, angle2) #(3 Doubles)->GEOM_Object
+ Sphere = geompy.MakeSpherePntR(p0, radius1) #(GEOM_Object, Double)->GEOM_Object
+ Sphere1 = geompy.MakeSphereR(radius) #(Double)->GEOM_Object
+ Sphere2 = geompy.MakeSphere(50, 70, 30, radius) #(4 Doubles)->GEOM_Object
+ Cone = geompy.MakeCone(p0, vz, radius2, radius, height) #(2 GEOM_Object, 3 Doubles)->GEOM_Object
+ Cone1 = geompy.MakeConeR1R2H(radius1, radius, height) #(3 Doubles)->GEOM_Object
+ Torus = geompy.MakeTorus(p0, vz, radius2, radius) #(2 GEOM_Object, 2 Doubles)->GEOM_Object
+ Torus1 = geompy.MakeTorusRR(radius2, radius1) #(2 Doubles)->GEOM_Object
#Boolean (Common, Cut, Fuse, Section)
Common = geompy.MakeBoolean(Box, Sphere, 1) #(2 GEOM_Object, Short)->GEOM_Object
Face2 = geompy.MakeFace(Sketcher, WantPlanarFace)
Face3 = geompy.MakeFaceHW (100., 200., 1) #(2 Doubles, 1 Int)->GEOM_Object
Face4 = geompy.MakeFaceObjHW (vz, 200., 100.) #(1 GEOM_Object, 2 Doubles)->GEOM_Object
+ Face5 = geompy.MakeFaceFromSurface(Face, Sketcher) #(2 GEOM_Objects)->GEOM_Object
Disk = geompy.MakeDiskPntVecR (p0, vz, radius) #(2 GEOM_Object, 1 Double)->GEOM_Object
Disk2 = geompy.MakeDiskThreePnt(p0, p200, pz) #(3 GEOM_Object)->GEOM_Object
Disk3 = geompy.MakeDiskR(100., 1) #(1 Doubles, 1 Int)->GEOM_Object
prism1_faces[3], prism1_faces[4],
prism1_faces[5], prism1_faces[2]])
Solid = geompy.MakeSolid([Shell1]) #(List of GEOM_Object)->GEOM_Object
-
+
+ Box1_translation = geompy.MakeTranslation(Box1, 10, 0, 0)
+ Box1_shell = geompy.SubShapeAllSorted(Box1, geompy.ShapeType["SHELL"])[0]
+ Box1_translation_shell = geompy.SubShapeAllSorted(Box1_translation, geompy.ShapeType["SHELL"])[0]
+
+ Solid_from_shells = geompy.MakeSolidFromConnectedFaces([Box1_shell, Box1_translation_shell], 1) #(List of GEOM_Object, Boolean)->GEOM_Object
+
# Create Isoline
Isoline = geompy.MakeIsoline(Face1, True, 0.5) #(1 GEOM_Object, Boolean, Double)->GEOM_Object
Offset = geompy.MakeOffset(Box, 10.) #(GEOM_Object, Double)->GEOM_Object
Orientation = geompy.ChangeOrientation(Box)
ProjOnWire = geompy.MakeProjectionOnWire(p0, Wire)
+ ExtEdge = geompy.ExtendEdge(Edge1, -0.3, 1.3)
+ ExtFace = geompy.ExtendFace(Face5, -0.3, 1.3, -0.1, 1.1)
+ Surface = geompy.MakeSurfaceFromFace(Face5)
#IDList for Fillet/Chamfer
prism_edges = geompy.ExtractShapes(Prism, geompy.ShapeType["EDGE"], True)
id_Face2 = geompy.addToStudy(Face2, "Face from Sketcher")
id_Face3 = geompy.addToStudy(Face3, "Face Height Width")
id_Face4 = geompy.addToStudy(Face4, "Face Plane_HW")
+ id_Face5 = geompy.addToStudy(Face5, "Face from surface and wire")
id_Disk = geompy.addToStudy(Disk, "Disk PntVecR")
id_Disk2 = geompy.addToStudy(Disk2, "Disk Three Points")
id_Disk3 = geompy.addToStudy(Disk3, "Disk OXY Radius")
id_Prism1 = geompy.addToStudy(Prism1, "Prism by Two Pnt")
id_Shell1 = geompy.addToStudy(Shell1, "Shell from Prism1 faces")
id_Solid = geompy.addToStudy(Solid, "Solid")
+ id_Solid1 = geompy.addToStudy(Solid_from_shells, "Solid1")
+
id_Compound = geompy.addToStudy(Compound, "Compound")
id_Plane2 = geompy.addToStudy(Plane2, "Plane on Face")
id_Offset = geompy.addToStudy(Offset, "Offset")
id_Orientation = geompy.addToStudy(Orientation, "Orientation")
id_ProjOnWire = geompy.addToStudy(ProjOnWire[1], "ProjOnWire")
+ id_ExtEdge = geompy.addToStudy(ExtEdge, "ExtendedEdge")
+ id_ExtFace = geompy.addToStudy(ExtFace, "ExtendedFace")
+ id_Surface = geompy.addToStudy(Surface, "Surface From Face")
id_Fillet = geompy.addToStudy(Fillet, "Fillet")
id_Fillet2 = geompy.addToStudy(Fillet2, "Fillet2")
id_Partition = geompy.addToStudy(Partition, "Partition")
id_Partition1 = geompy.addToStudy(Partition1, "Half Partition")
-
+
#Decompose objects
# SubShape
