# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
#
# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
Face2 = geompy.MakeFace(Sketcher, WantPlanarFace)
Face3 = geompy.MakeFaceHW (100., 200., 1) #(2 Doubles, 1 Int)->GEOM_Object
Face4 = geompy.MakeFaceObjHW (vz, 200., 100.) #(1 GEOM_Object, 2 Doubles)->GEOM_Object
+ Face5 = geompy.MakeFaceFromSurface(Face, Sketcher) #(2 GEOM_Objects)->GEOM_Object
+
+ Cut2 = geompy.MakeCutList(Sphere1, [Box1], True)
+ #(List of GEOM_Object)->GEOM_Object
+ Face6 = geompy.MakeFaceWithConstraints([geompy.GetSubShape(Cut2, [5]), geompy.GetSubShape(Cut2, [3]),
+ geompy.GetSubShape(Cut2, [11]), geompy.GetSubShape(Cut2, [3]),
+ geompy.GetSubShape(Cut2, [13]), geompy.GetSubShape(Cut2, [3])])
Disk = geompy.MakeDiskPntVecR (p0, vz, radius) #(2 GEOM_Object, 1 Double)->GEOM_Object
Disk2 = geompy.MakeDiskThreePnt(p0, p200, pz) #(3 GEOM_Object)->GEOM_Object
Disk3 = geompy.MakeDiskR(100., 1) #(1 Doubles, 1 Int)->GEOM_Object
prism1_faces[3], prism1_faces[4],
prism1_faces[5], prism1_faces[2]])
Solid = geompy.MakeSolid([Shell1]) #(List of GEOM_Object)->GEOM_Object
-
+
+ Box1_translation = geompy.MakeTranslation(Box1, 10, 0, 0)
+ Box1_shell = geompy.SubShapeAllSorted(Box1, geompy.ShapeType["SHELL"])[0]
+ Box1_translation_shell = geompy.SubShapeAllSorted(Box1_translation, geompy.ShapeType["SHELL"])[0]
+
+ Solid_from_shells = geompy.MakeSolidFromConnectedFaces([Box1_shell, Box1_translation_shell], 1) #(List of GEOM_Object, Boolean)->GEOM_Object
+
# Create Isoline
Isoline = geompy.MakeIsoline(Face1, True, 0.5) #(1 GEOM_Object, Boolean, Double)->GEOM_Object
Line3 = geompy.MakeLineTwoFaces(prism1_faces[0], prism1_faces[1]) #(2 GEOM_Object)->GEOM_Object
#Create advanced objects
- Copy = geompy.MakeCopy(Box) #(GEOM_Object)->GEOM_Object
Prism = geompy.MakePrismVecH(Face, vz, 100.0) #(2 GEOM_Object, Double)->GEOM_Object
Prism2Ways = geompy.MakePrismVecH2Ways(Face, vz, 10.0) #(2 GEOM_Object, Double)->GEOM_Object
PrismTwoPnt = geompy.MakePrism(Face2, p0, pxyz) #(3 GEOM_Object)->GEOM_Object
tol2d, tol3d, nbiter) #(GEOM_Object, 4 Doubles, Short)->GEOM_Object
Pipe = geompy.MakePipe(Wire, Edge) #(2 GEOM_Object)->GEOM_Object
Sewing = geompy.MakeSewing([Face, S], precision) #(List Of GEOM_Object, Double)->GEOM_Object
+ ThickSolid = geompy.MakeCopy(Box)
+ faces = geompy.SubShapeAllSortedCentres(Box, geompy.ShapeType["FACE"])
+ shell = geompy.MakeShell([faces[0], faces[1], faces[2]])
+ faceIDs = geompy.SubShapeAllSortedCentresIDs(ThickSolid, geompy.ShapeType["FACE"])
+ ThickShell = geompy.MakeThickSolid(shell, 50) #(GEOM_Object, Double)->GEOM_Object
+ geompy.Thicken(ThickSolid, 50, [faceIDs[0], faceIDs[1]]) #(GEOM_Object) modification
+ Copy = geompy.MakeCopy(Box) #(GEOM_Object)->GEOM_Object
#Transform objects
Translation = geompy.MakeTranslationTwoPoints(Box, px, pz) #(3 GEOM_Object)->GEOM_Object
Position = geompy.MakePosition(Box, cs1, cs2) #(3 GEOM_Object)->GEOM_Object
Position2 = geompy.PositionAlongPath(Box, Arc, 0.5, 1, 0) #(2 GEOM_Object, 1 Double, 2 Bool)->GEOM_Object
Offset = geompy.MakeOffset(Box, 10.) #(GEOM_Object, Double)->GEOM_Object
- Orientation = geompy.ChangeOrientation(Box)
ProjOnWire = geompy.MakeProjectionOnWire(p0, Wire)
+ ProjOnCyl = geompy.MakeProjectionOnCylinder(Wire, 100)
+ Orientation = geompy.ChangeOrientation(Box)
+ ExtEdge = geompy.ExtendEdge(Edge1, -0.3, 1.3)
+ ExtFace = geompy.ExtendFace(Face5, -0.3, 1.3, -0.1, 1.1)
+ Surface = geompy.MakeSurfaceFromFace(Face5)
#IDList for Fillet/Chamfer
prism_edges = geompy.ExtractShapes(Prism, geompy.ShapeType["EDGE"], True)
sse_id = geompy.GetSubShapeID(Prism, sse)
if sse_id != eid:
- print "Error: GetSubShape() or GetSubShapeID() has failed!"
+ print("Error: GetSubShape() or GetSubShapeID() has failed!")
IDlist_e = []
IDlist_e.append(geompy.GetSubShapeID(Prism, prism_edges[0]))
Archimede = geompy.Archimede(Box, weight, waterdensity,
meshingdeflection) #(GEOM_Object, 3 Doubles)->GEOM_Object
mindist = geompy.MinDistanceComponents(TranslVect, Mirror) #(2 GEOM_Object)->4 Doubles
- print "Minumal distance between TranslVect and Mirror is", mindist[0],
- print "by components:", mindist[1], ",", mindist[2], ",", mindist[3]
+ print("Minumal distance between TranslVect and Mirror is", mindist[0], end=' ')
+ print("by components:", mindist[1], ",", mindist[2], ",", mindist[3])
CheckShape = geompy.CheckShape(Prism) #(GEOM_Object)->Boolean
- print "CheckShape(Prism) = ", CheckShape
+ print("CheckShape(Prism) = ", CheckShape)
#Partition objects
Partition = geompy.MakePartition([Box], [Plane]) #(2 Lists Of GEOM_Object)->GEOM_Object
id_Common = geompy.addToStudy(Common, "Common")
id_Cut = geompy.addToStudy(Cut, "Cut")
+ id_Cut2 = geompy.addToStudy(Cut2, "Cut2")
id_Fuse = geompy.addToStudy(Fuse, "Fuse")
id_Section = geompy.addToStudy(Section, "Section")
id_Face2 = geompy.addToStudy(Face2, "Face from Sketcher")
id_Face3 = geompy.addToStudy(Face3, "Face Height Width")
id_Face4 = geompy.addToStudy(Face4, "Face Plane_HW")
+ id_Face5 = geompy.addToStudy(Face5, "Face from surface and wire")
+ id_Face6 = geompy.addToStudy(Face6, "Face from edges with constraints")
id_Disk = geompy.addToStudy(Disk, "Disk PntVecR")
id_Disk2 = geompy.addToStudy(Disk2, "Disk Three Points")
id_Disk3 = geompy.addToStudy(Disk3, "Disk OXY Radius")
id_Prism1 = geompy.addToStudy(Prism1, "Prism by Two Pnt")
id_Shell1 = geompy.addToStudy(Shell1, "Shell from Prism1 faces")
id_Solid = geompy.addToStudy(Solid, "Solid")
+ id_Solid1 = geompy.addToStudy(Solid_from_shells, "Solid1")
+
id_Compound = geompy.addToStudy(Compound, "Compound")
id_Plane2 = geompy.addToStudy(Plane2, "Plane on Face")
id_Copy = geompy.addToStudy(Copy, "Copy")
+ id_ThickShell = geompy.addToStudy(ThickShell, "ThickShell")
+ id_ThickSolid = geompy.addToStudy(ThickSolid, "ThickSolid")
+
id_Prism = geompy.addToStudy(Prism, "Prism")
id_Prism2Ways = geompy.addToStudy(Prism2Ways, "Prism2Ways")
id_PrismTwoPnt = geompy.addToStudy(PrismTwoPnt, "PrismTwoPnt")
id_Offset = geompy.addToStudy(Offset, "Offset")
id_Orientation = geompy.addToStudy(Orientation, "Orientation")
id_ProjOnWire = geompy.addToStudy(ProjOnWire[1], "ProjOnWire")
+ id_ProjOnCyl = geompy.addToStudy(ProjOnCyl, "ProjOnCyl")
+ id_ExtEdge = geompy.addToStudy(ExtEdge, "ExtendedEdge")
+ id_ExtFace = geompy.addToStudy(ExtFace, "ExtendedFace")
+ id_Surface = geompy.addToStudy(Surface, "Surface From Face")
id_Fillet = geompy.addToStudy(Fillet, "Fillet")
id_Fillet2 = geompy.addToStudy(Fillet2, "Fillet2")
id_Partition = geompy.addToStudy(Partition, "Partition")
id_Partition1 = geompy.addToStudy(Partition1, "Half Partition")
-
+
#Decompose objects
# SubShape
# GetExistingSubObjects
SubObjsAll = geompy.GetExistingSubObjects(Box, True)
- print "For now, Box has the following created sub-objects:", SubObjsAll
+ print("For now, Box has the following created sub-objects:", SubObjsAll)
# GetGroups
SubGrpsAll = geompy.GetGroups(Box)
- print "For now, Box has the following created groups:", SubGrpsAll
+ print("For now, Box has the following created groups:", SubGrpsAll)
# SubShapeAll
SubEdgeList = geompy.SubShapeAll(SubFace, geompy.ShapeType["EDGE"])
# SubShapeAllIDs
SubEdgeIDsList = geompy.SubShapeAllIDs(SubFace, geompy.ShapeType["EDGE"])
- print "IDs of edges of SubFace:", SubEdgeIDsList, "(unsorted)"
+ print("IDs of edges of SubFace:", SubEdgeIDsList, "(unsorted)")
group = geompy.CreateGroup(SubFace, geompy.ShapeType["EDGE"])
geompy.UnionIDs(group, SubEdgeIDsList)
geompy.addToStudyInFather(SubFace, group, "Group of all edges")
# SubShapeAllSortedCentresIDs
SubEdgeIDsList = geompy.SubShapeAllSortedCentresIDs(SubFace, geompy.ShapeType["EDGE"])
- print "IDs of edges of SubFace:", SubEdgeIDsList, "(sorted)"
+ print("IDs of edges of SubFace:", SubEdgeIDsList, "(sorted)")
# GetSubShape and GetSubShapeID
for ind in SubEdgeIDsList:
edge = geompy.GetSubShape(SubFace, [ind])
ind_e = geompy.GetSubShapeID(SubFace, edge)
if ind_e != ind:
- print "Error in GetSubShape or GetSubShapeID"
+ print("Error in GetSubShape or GetSubShapeID")
# RestoreSubShapes
geompy.RestoreSubShapes(Copy)
geompy.RestoreSubShapes(Partition, [Box])
geompy.RestoreSubShapes(Partition1)
- print "DONE"
+ # GetSubShapeEdgeSorted
+ p1 = geompy.GetFirstVertex(Sketcher)
+ p2 = geompy.GetFirstVertex(Sketcher3d_1)
+ p3 = geompy.GetFirstVertex(Sketcher3d_2)
+ geompy.GetSubShapeEdgeSorted(Sketcher, p1, "OrderedEdges")
+ geompy.GetSubShapeEdgeSorted(Sketcher3d_1, p2, "OrderedEdges")
+ geompy.GetSubShapeEdgeSorted(Sketcher3d_2, p3, "OrderedEdges")
+
+ # GetSubShapesWithTolerance
+ geompy.GetSubShapesWithTolerance(Box, GEOM.FACE, GEOM.CC_GT, 1.e-8, "gt")
+ geompy.GetSubShapesWithTolerance(Box, GEOM.FACE, GEOM.CC_GE, 1.e-7, "ge")
+ geompy.GetSubShapesWithTolerance(Box, GEOM.FACE, GEOM.CC_LT, 2.e-7, "lt")
+ geompy.GetSubShapesWithTolerance(Box, GEOM.FACE, GEOM.CC_LE, 1.e-7, "le")
+
+ # MakeExtraction
+ geompy.MakeExtraction(Box, [13], "Ext_no_face")
+ geompy.MakeExtraction(Box, [18], "Ext_no_edge")
+ geompy.MakeExtraction(Box, [16], "Ext_no_vertex")
+
+
+ print("DONE")