-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2024 CEA, EDF, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#ifndef _GEOMUtils_HXX_
#define _GEOMUtils_HXX_
+#include <Standard_Macro.hxx>
#include <TopoDS_Shape.hxx>
#include <TopoDS_Vertex.hxx>
#include <gp_Ax3.hxx>
#include <gp_Vec.hxx>
+#include <V3d_View.hxx>
+
#include <NCollection_DataMap.hxx>
#include <functional>
+#include <map>
+#include <vector>
+#include <string>
+#include <utility>
+
class Bnd_Box;
inline Standard_Boolean IsEqual (const TopoDS_Shape& S1, const TopoDS_Shape& S2)
return S1.IsSame(S2);
}
-class GEOMUtils {
+namespace GEOMUtils
+{
+
+ /**
+ * This enumeration represents comparison conditions.
+ */
+ enum ComparisonCondition {
+ CC_GT, ///< Greater then
+ CC_GE, ///< Greater then or equal to
+ CC_LT, ///< Less then
+ CC_LE ///< Less then or equal to
+ };
+
+ typedef std::vector<std::string> NodeLinks;
+ typedef std::map<std::string, NodeLinks> LevelInfo;
+ typedef std::vector<LevelInfo> LevelsList;
+ typedef std::map<std::string,std::pair<LevelsList,LevelsList> > TreeModel;
+
+ /*!
+ * \brief Compute numerical functor for the shape.
+ *
+ * Resulting value can be used to sort out shapes according to some parameter.
+ *
+ * Returns a pair of two values (dist, functor) where
+ * - \a dist is a some value that is computed according to the center of mass of given shape;
+ * - \a functor is a numerical functor value
+ *
+ * The numerical functor is computed according to the shape's topological properties as follows:
+ * - orientation for vertices
+ * - length for edges and wires
+ * - area for faces and shells
+ * - volume for solids, compounds, compsolids
+ *
+ * If \a isOldSorting parameter is set to \c true, for all cases linear properties of the shape
+ * are used (to support backward compatibility in some methods). By default, this parameter is
+ * set to \c false.
+ */
+ Standard_EXPORT std::pair<double, double> ShapeToDouble (const TopoDS_Shape& theShape,
+ bool isOldSorting = false);
- public:
/*!
* \brief Get Local Coordinate System, corresponding to the given shape.
*
* Axes of the LCS are obtained from shape's location or,
* if the shape is a planar face, from position of its plane.
*/
- Standard_EXPORT static gp_Ax3 GetPosition (const TopoDS_Shape& theShape);
+ Standard_EXPORT gp_Ax3 GetPosition (const TopoDS_Shape& theShape);
/*!
* \brief Get vector, defined by the given edge.
* the same edge can have different orientation depending on the way it was
* extracted from a shape.
*/
- Standard_EXPORT static gp_Vec GetVector (const TopoDS_Shape& theShape,
- Standard_Boolean doConsiderOrientation);
+ Standard_EXPORT gp_Vec GetVector (const TopoDS_Shape& theShape,
+ Standard_Boolean doConsiderOrientation);
/*!
* \brief Sort shapes in the list by their coordinates.
* \param SL The list of shapes to sort.
*/
- struct CompareShapes : public std::binary_function<TopoDS_Shape, TopoDS_Shape, bool>
+ struct CompareShapes //: public std::binary_function<TopoDS_Shape, TopoDS_Shape, bool>
{
CompareShapes (bool isOldSorting)
: myIsOldSorting(isOldSorting) {}
/*!
* \brief Sort shapes by their centers of mass, using formula X*999 + Y*99 + Z*0.9
*/
- Standard_EXPORT static void SortShapes (TopTools_ListOfShape& SL,
- const Standard_Boolean isOldSorting = Standard_True);
+ Standard_EXPORT void SortShapes (TopTools_ListOfShape& SL,
+ const Standard_Boolean isOldSorting = Standard_True);
/*!
* \brief Convert TopoDS_COMPSOLID to TopoDS_COMPOUND.
* \param theCompsolid The compsolid to be converted.
* \retval TopoDS_Shape Returns the resulting compound.
*/
- Standard_EXPORT static TopoDS_Shape CompsolidToCompound (const TopoDS_Shape& theCompsolid);
+ Standard_EXPORT TopoDS_Shape CompsolidToCompound (const TopoDS_Shape& theCompsolid);
/*!
* \brief Recursively extract all shapes from compounds and compsolids of the given shape into theList.
* \param theShape The shape to be exploded.
* \param theList Output parameter.
*/
- Standard_EXPORT static void AddSimpleShapes (const TopoDS_Shape& theShape,
- TopTools_ListOfShape& theList);
-
- /*!
- * \brief Build a triangulation on \a theShape if it is absent.
- * \param theShape The shape to check/build triangulation on.
- * \retval bool Returns false if the shape has no faces, i.e. impossible to build triangulation.
- */
- Standard_EXPORT static bool CheckTriangulation (const TopoDS_Shape& theShape);
+ Standard_EXPORT void AddSimpleShapes (const TopoDS_Shape& theShape,
+ TopTools_ListOfShape& theList);
/*!
* \brief Return type of shape for explode. In case of compound it will be a type of its first sub shape.
* \param theShape The shape to get type of.
* \retval TopAbs_ShapeEnum Return type of shape for explode.
*/
- Standard_EXPORT static TopAbs_ShapeEnum GetTypeOfSimplePart (const TopoDS_Shape& theShape);
+ Standard_EXPORT TopAbs_ShapeEnum GetTypeOfSimplePart (const TopoDS_Shape& theShape);
/*!
* \brief Find an edge of theShape, closest to thePoint.
* \param thePoint The point near the required edge.
* \retval TopoDS_Shape Returns the found edge or an empty shape if multiple edges found.
*/
- Standard_EXPORT static TopoDS_Shape GetEdgeNearPoint (const TopoDS_Shape& theShape,
- const TopoDS_Vertex& thePoint);
+ Standard_EXPORT TopoDS_Shape GetEdgeNearPoint (const TopoDS_Shape& theShape,
+ const TopoDS_Vertex& thePoint);
/*!
* \brief Compute precise bounding box of the shape based on the rough bounding box.
* \param theBox rough bounding box on input; precise bounding box on output.
* \retval Standard_True in case of success; Standard_False otherwise.
*/
- Standard_EXPORT static Standard_Boolean PreciseBoundingBox
- (const TopoDS_Shape &theShape, Bnd_Box &theBox);
+ Standard_EXPORT Standard_Boolean PreciseBoundingBox(const TopoDS_Shape &theShape, Bnd_Box &theBox);
/*!
* \brief Computes minumal distance between two shapes for singular cases
* \param Ptmp2 the output result point on the second shape
* \retval negative value if it is not a singular case; actual distance for singular case.
*/
- Standard_EXPORT static Standard_Real GetMinDistanceSingular
- (const TopoDS_Shape& aSh1,
- const TopoDS_Shape& aSh2,
- gp_Pnt& Ptmp1, gp_Pnt& Ptmp2);
+ Standard_EXPORT Standard_Real GetMinDistanceSingular(const TopoDS_Shape& aSh1,
+ const TopoDS_Shape& aSh2,
+ gp_Pnt& Ptmp1, gp_Pnt& Ptmp2);
/*!
* \brief Computes minumal distance between two shapes.
* \param thePnt2 the output result point on the second shape
* \retval negative value in case of failure; otherwise the real distance.
*/
- Standard_EXPORT static Standard_Real GetMinDistance
- (const TopoDS_Shape& theShape1,
- const TopoDS_Shape& theShape2,
- gp_Pnt& thePnt1, gp_Pnt& thePnt2);
+ Standard_EXPORT Standard_Real GetMinDistance(const TopoDS_Shape& theShape1,
+ const TopoDS_Shape& theShape2,
+ gp_Pnt& thePnt1, gp_Pnt& thePnt2);
+
+ /*!
+ * \brief Computes normal projection of \a thePoint to \a theFace.
+ *
+ * \param thePoint the 3d point
+ * \param theFace the face shape
+ * \param theU the output U parameter of the point on the face
+ * \param theV the output V parameter of the point on the face
+ * \param theTol the tolerance value. Maximum of theTol and 1e-04 will be used for calculation.
+ * \retval the projection (3d point) if found, throws an exception otherwise
+ */
+ Standard_EXPORT gp_Pnt ProjectPointOnFace(const gp_Pnt& thePoint,
+ const TopoDS_Shape& theFace,
+ double& theU, double& theV,
+ const double theTol = 1e-04);
-};
+ /*!
+ * \brief Returns the point clicked in 3D view.
+ *
+ * \param x The X coordinate in the view.
+ * \param y The Y coordinate in the view.
+ * \param theView View where the given point takes place.
+ * \retval gp_Pnt Returns the point clicked in 3D view
+ */
+ Standard_EXPORT gp_Pnt ConvertClickToPoint( int x, int y, Handle(V3d_View) theView );
+
+ /*!
+ * \brief Convert dependency tree data to the string representation
+ *
+ * \param tree dependency tree data
+ * \param dependencyStr output string
+ */
+ Standard_EXPORT void ConvertTreeToString( const TreeModel& tree,
+ std::string& dependencyStr );
+
+ /*!
+ * \brief Restore dependency tree data from the string representation
+ *
+ * \param dependencyStr string representation of tree data
+ * \param tree output dependency tree data
+ */
+ Standard_EXPORT void ConvertStringToTree( const std::string& dependencyStr,
+ TreeModel& tree );
+
+ /*!
+ * \brief Check shape
+ *
+ * \param shape input shape object
+ * \param checkGeometry when set to \c true, causes check of underlying geometry
+ * in addition to the topology
+ * \return \c true if shape is valid or \c false otherwise
+ */
+ Standard_EXPORT bool CheckShape( TopoDS_Shape& shape, bool checkGeometry = false );
+
+ /*!
+ * \brief Check boolean and partition operations arguments
+ *
+ * \param theShape the argument of an operation to be checked
+ * \return \c true if the argument is valid for a boolean or partition
+ * operation or \c false otherwise
+ */
+ Standard_EXPORT bool CheckBOPArguments(const TopoDS_Shape &theShape);
+
+ /*!
+ * \brief Limit shape tolerance to the given value
+ *
+ * \param shape shape being fixed
+ * \param type topology type which tolerance is to be limited; TopAbs_SHAPE means
+ * all types of topology
+ * \param tolerance expected tolerance value (1e-7 by default)
+ * \param checkGeometry check geometry validity of result
+ * \return \c true if resulting shape is valid
+ *
+ * \note Resulting tolerance of the shape is not mandatory equal to requested value
+ * as it might be changed by fixshape operation in order to get valid shape where possible
+ * \note By default, result only checked for topology validity; check of geometry can be done by
+ * passing \c true to \a checkGeometry parameter
+ */
+ Standard_EXPORT bool FixShapeTolerance( TopoDS_Shape& shape,
+ TopAbs_ShapeEnum type,
+ Standard_Real tolerance = Precision::Confusion(),
+ bool checkGeometry = false );
+
+ /*!
+ * \brief Limit shape tolerance to the given value
+ * This is overloaded function, it behaves exactly as previous one
+ */
+ Standard_EXPORT bool FixShapeTolerance( TopoDS_Shape& shape,
+ Standard_Real tolerance = Precision::Confusion(),
+ bool checkGeometry = false );
+
+ /*!
+ * \brief Limit shape tolerance to the given value
+ * This is overloaded function, it behaves exactly as previous one
+ */
+ Standard_EXPORT bool FixShapeTolerance( TopoDS_Shape& shape,
+ bool checkGeometry );
+
+ /*!
+ * \brief Fix curves of the given shape
+ *
+ * The function checks each curve of the input shape in the following way:
+ * - compute deviation of the curve from the underlying surface in a set of points
+ * computed with the certain discretization step value
+ * - find maximum tolerance between computed deviation values
+ * - limit tolerance of the curve with the computed maximum value
+ *
+ * \param shape shape being fixed
+ * \return \c true if resulting shape is valid
+ */
+ Standard_EXPORT bool FixShapeCurves( TopoDS_Shape& shape );
+
+ /*!
+ * \brief Write shape to the BREP file
+ *
+ * \param source shape
+ * \return \c true if file was written or \c false otherwise
+ */
+ Standard_EXPORT bool Write( const TopoDS_Shape& shape,
+ const char* fileName );
+
+ /*!
+ * \brief Extract single SOLID from COMPSOLID or COMPOUND.
+ *
+ * If the argument shape is a COMPOUND or COMPSOLID and there's
+ * only single simple-shape type inside, this sub-shape is returned as a result;
+ * otherwise, the shape is not changed.
+ *
+ * \param shape compound or compsolid being processed.
+ * \retval TopoDS_Shape resulting shape
+ */
+ Standard_EXPORT TopoDS_Shape ReduceCompound( const TopoDS_Shape& shape );
+
+ /*!
+ * \brief Get default deflection coefficient used for triangulation
+ * \return default deflection value
+ */
+ Standard_EXPORT double DefaultDeflection();
+
+ /*!
+ * \brief Generate triangulation for \a theShape.
+ *
+ * \param theShape shape to be meshed.
+ * \param theDeflection deflection coefficient to be used.
+ * \param theForced if \c true, causes generation of mesh regardless it is already present in the shape.
+ * \param theAngleDeflection angular deflection coefficient to be used.
+ * \param isRelative if true, \a theDeflection is considered relative to \a theShape maximum axial dimension.
+ * \param doPostCheck if true, check mesh generation result and return corresponding boolean value.
+ * \retval bool Returns false in the following cases:
+ * 1. The shape has neither faces nor edges, i.e. impossible to build triangulation or polygon.
+ * 2. \a theForced is false and \a theShape has no mesh or has incomplete mesh.
+ * 3. \a doPostCheck is true and mesh generation failed or produced an incomplete mesh.
+ */
+ Standard_EXPORT bool MeshShape( const TopoDS_Shape theShape,
+ const double theDeflection = DefaultDeflection(),
+ const bool theForced = true,
+ const double theAngleDeflection = 0.5,
+ const bool isRelative = true,
+ const bool doPostCheck = false);
+
+ /*!
+ * \brief Build a triangulation on \a theShape if it is absent.
+ * \param theShape The shape to check/build triangulation on.
+ * \retval bool Returns false if the shape has no faces, i.e. impossible to build triangulation.
+ */
+ Standard_EXPORT bool CheckTriangulation (const TopoDS_Shape& theShape);
+
+ /**
+ * \brief Check if the shape is not a closed wire or edge.
+ *
+ * This function is used for pipe creation algorithm to test if
+ * the pipe path is not closed. It returns false if theShape is a wire or
+ * an edge with coincident end vertices. Otherwise it returns true.
+ *
+ * \param theShape the shape to be tested.
+ * \return true if theShape is not a closed wire or edge.
+ */
+ Standard_EXPORT bool IsOpenPath(const TopoDS_Shape &theShape);
+
+ /**
+ * This function compares two tolerances. The shape tolerance (the first
+ * argument) is considered less than the reference tolerance (the second
+ * argument) if theTolShape < theTolRef - Tolerance(theTolRef). theTolShape is
+ * considered greater than theTolRef if theTolShape > theTolRef +
+ * Tolerance(theTolRef). Otherwise these tolerances are equal.
+ * Tolerance(theTolRef) = theTolRef*DEFAULT_TOLERANCE_TOLERANCE. But this value
+ * should not be greated than DEFAULT_MAX_TOLERANCE_TOLERANCE.
+ *
+ * \param theTolShape the shape tolerance
+ * \param theTolRef the reference tolerance
+ * \return -1 if theTolShape is less than theTolRef; 1 if theTolShape is greater
+ * than theTolRef; 0 if they are equal
+ */
+ Standard_EXPORT int CompareToleranceValues(const double theTolShape,
+ const double theTolRef);
+
+ /**
+ * Check if the comarison of tolerances fit the condition. The comparison of
+ * tolerances is performed using the function CompareToleranceValues.
+ *
+ * \param theCondition the condition
+ * \param theTolShape the shape tolerance
+ * \param theTolRef the reference tolerance
+ * \return true if the shape tolerance fits the condition; false otherwise.
+ */
+ Standard_EXPORT bool IsFitCondition(const ComparisonCondition theCondition,
+ const double theTolShape,
+ const double theTolRef);
+
+}
#endif