-
-#include <Standard_Stream.hxx>
+// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
+//
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
#include <GEOMImpl_ShapeDriver.hxx>
+
+#include <GEOMImpl_IIsoline.hxx>
#include <GEOMImpl_IShapes.hxx>
-#include <GEOMImpl_IShapesOperations.hxx>
+#include <GEOMImpl_IShapeExtend.hxx>
+#include <GEOMImpl_IVector.hxx>
#include <GEOMImpl_Types.hxx>
#include <GEOMImpl_Block6Explorer.hxx>
#include <GEOM_Function.hxx>
+#include <GEOMUtils_Hatcher.hxx>
// OCCT Includes
#include <ShapeFix_Wire.hxx>
+#include <ShapeFix_Edge.hxx>
+#include <ShapeFix_Shape.hxx>
-#include <BRep_Tool.hxx>
#include <BRep_Builder.hxx>
+#include <BRep_Tool.hxx>
+#include <BRepAdaptor_Curve.hxx>
#include <BRepAlgo_FaceRestrictor.hxx>
-#include <BRepBuilderAPI_Sewing.hxx>
#include <BRepBuilderAPI_Copy.hxx>
-#include <BRepTools_Quilt.hxx>
+#include <BRepBuilderAPI_Sewing.hxx>
+#include <BRepBuilderAPI_MakeFace.hxx>
+#include <BRepBuilderAPI_MakeWire.hxx>
+#include <BRepBuilderAPI_MakeEdge.hxx>
+#include <BRepBuilderAPI_MakeSolid.hxx>
#include <BRepCheck.hxx>
#include <BRepCheck_Analyzer.hxx>
#include <BRepCheck_Shell.hxx>
#include <BRepClass3d_SolidClassifier.hxx>
-#include <BRepBuilderAPI_MakeWire.hxx>
+#include <BRepLib.hxx>
+#include <BRepLib_MakeEdge.hxx>
+#include <BRepTools_WireExplorer.hxx>
+
+#include <ShapeAnalysis.hxx>
+#include <ShapeAnalysis_FreeBounds.hxx>
#include <TopAbs.hxx>
+#include <TopExp.hxx>
+#include <TopExp_Explorer.hxx>
#include <TopoDS.hxx>
#include <TopoDS_Shape.hxx>
#include <TopoDS_Edge.hxx>
#include <TopoDS_Wire.hxx>
+#include <TopoDS_Shell.hxx>
#include <TopoDS_Solid.hxx>
#include <TopoDS_Compound.hxx>
#include <TopoDS_Iterator.hxx>
-#include <TopExp_Explorer.hxx>
+
#include <TopTools_MapOfShape.hxx>
-#include <TopTools_SequenceOfShape.hxx>
-#include <TopTools_ListIteratorOfListOfShape.hxx>
+#include <TopTools_HSequenceOfShape.hxx>
+
+#include <ElCLib.hxx>
+
+#include <GCPnts_AbscissaPoint.hxx>
+
+#include <Geom_TrimmedCurve.hxx>
+#include <Geom_RectangularTrimmedSurface.hxx>
+#include <Geom_Surface.hxx>
+#include <GeomAbs_CurveType.hxx>
+#include <GeomConvert_CompCurveToBSplineCurve.hxx>
+#include <GeomConvert.hxx>
+#include <GeomLProp.hxx>
+
+#include <TColStd_SequenceOfReal.hxx>
+#include <TColStd_HSequenceOfTransient.hxx>
+#include <TColStd_Array1OfReal.hxx>
+#include <TColGeom_SequenceOfCurve.hxx>
+#include <TColGeom_Array1OfBSplineCurve.hxx>
+#include <TColGeom_HArray1OfBSplineCurve.hxx>
#include <Precision.hxx>
+
#include <Standard_NullObject.hxx>
#include <Standard_TypeMismatch.hxx>
#include <Standard_ConstructionError.hxx>
+#include <BOPAlgo_PaveFiller.hxx>
+#include <BOPAlgo_MakerVolume.hxx>
+
+#include <list>
+
+//modified by NIZNHY-PKV Wed Dec 28 13:48:20 2011f
+//static
+// void KeepEdgesOrder(const Handle(TopTools_HSequenceOfShape)& aEdges,
+// const Handle(TopTools_HSequenceOfShape)& aWires);
+//modified by NIZNHY-PKV Wed Dec 28 13:48:23 2011t
+
//=======================================================================
//function : GetID
//purpose :
Standard_Integer aType = aFunction->GetType();
TopoDS_Shape aShape;
+ TCollection_AsciiString aWarning;
+ std::list<TopAbs_ShapeEnum> anExpectedType;
+
BRep_Builder B;
if (aType == WIRE_EDGES) {
- Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
- unsigned int ind, nbshapes = aShapes->Length();
-
- TopoDS_Wire aWire;
- B.MakeWire(aWire);
+ anExpectedType.push_back(TopAbs_WIRE);
- // add edges
- for (ind = 1; ind <= nbshapes; ind++) {
- Handle(GEOM_Function) aRefShape = Handle(GEOM_Function)::DownCast(aShapes->Value(ind));
- TopoDS_Shape aShape_i = aRefShape->GetValue();
- if (aShape_i.IsNull()) {
- Standard_NullObject::Raise("Shape for wire construction is null");
- }
- if (aShape_i.ShapeType() == TopAbs_EDGE)
- B.Add(aWire, TopoDS::Edge(aShape_i));
- else if (aShape_i.ShapeType() == TopAbs_WIRE)
- B.Add(aWire, TopoDS::Wire(aShape_i));
- else
- Standard_TypeMismatch::Raise
- ("Shape for wire construction is neither an edge nor a wire");
- }
+ Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
- // fix edges order
- Handle(ShapeFix_Wire) aFW = new ShapeFix_Wire;
- aFW->Load(aWire);
- aFW->FixReorder();
+ Standard_Real aTolerance = aCI.GetTolerance();
+ if (aTolerance < Precision::Confusion())
+ aTolerance = Precision::Confusion();
- if (aFW->StatusReorder(ShapeExtend_FAIL1)) {
- Standard_ConstructionError::Raise("Wire construction failed: several loops detected");
- } else if (aFW->StatusReorder(ShapeExtend_FAIL)) {
- Standard_ConstructionError::Raise("Wire construction failed");
- } else if (aFW->StatusReorder(ShapeExtend_DONE2)) {
- Standard_ConstructionError::Raise("Wire construction failed: some gaps detected");
- } else {
- }
- aShape = aFW->Wire();
+ aShape = MakeWireFromEdges(aShapes, aTolerance);
+ }
+ else if (aType == FACE_WIRE) {
+ anExpectedType.push_back(TopAbs_FACE);
- } else if (aType == FACE_WIRE) {
Handle(GEOM_Function) aRefBase = aCI.GetBase();
TopoDS_Shape aShapeBase = aRefBase->GetValue();
- if (aShapeBase.IsNull() || aShapeBase.ShapeType() != TopAbs_WIRE) {
+ if (aShapeBase.IsNull()) Standard_NullObject::Raise("Argument Shape is null");
+ TopoDS_Wire W;
+ if (aShapeBase.ShapeType() == TopAbs_WIRE) {
+ W = TopoDS::Wire(aShapeBase);
+ // check the wire is closed
+ TopoDS_Vertex aV1, aV2;
+ TopExp::Vertices(W, aV1, aV2);
+ if ( !aV1.IsNull() && !aV2.IsNull() && aV1.IsSame(aV2) )
+ aShapeBase.Closed(true);
+ else
+ Standard_NullObject::Raise
+ ("Shape for face construction is not closed");
+ }
+ else if (aShapeBase.ShapeType() == TopAbs_EDGE && aShapeBase.Closed()) {
+ BRepBuilderAPI_MakeWire MW;
+ MW.Add(TopoDS::Edge(aShapeBase));
+ if (!MW.IsDone()) {
+ Standard_ConstructionError::Raise("Wire construction failed");
+ }
+ W = MW;
+ }
+ else {
Standard_NullObject::Raise
- ("Shape for face construction is null or not a wire");
+ ("Shape for face construction is neither a wire nor a closed edge");
}
- TopoDS_Wire W = TopoDS::Wire(aShapeBase);
- //BRepBuilderAPI_MakeFace MF (W, aCI.GetIsPlanar());
- //if (!MF.IsDone()) {
- // Standard_ConstructionError::Raise("Face construction failed");
- //}
- //aShape = MF.Shape();
- GEOMImpl_Block6Explorer::MakeFace(W, aCI.GetIsPlanar(), aShape);
+ aWarning = GEOMImpl_Block6Explorer::MakeFace(W, aCI.GetIsPlanar(), aShape);
if (aShape.IsNull()) {
Standard_ConstructionError::Raise("Face construction failed");
}
+ }
+ else if (aType == FACE_WIRES) {
+ anExpectedType.push_back(TopAbs_FACE);
+
+ // Try to build a face from a set of wires and edges
+ int ind;
- } else if (aType == FACE_WIRES) {
Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
int nbshapes = aShapes->Length();
if (nbshapes < 1) {
- Standard_ConstructionError::Raise("No wires given");
+ Standard_ConstructionError::Raise("No wires or edges given");
+ }
+
+ // 1. Extract all edges from the given arguments
+ TopTools_MapOfShape aMapEdges;
+ Handle(TopTools_HSequenceOfShape) aSeqEdgesIn = new TopTools_HSequenceOfShape;
+
+ for (ind = 1; ind <= nbshapes; ind++) {
+ Handle(GEOM_Function) aRefSh_i = Handle(GEOM_Function)::DownCast(aShapes->Value(ind));
+ TopoDS_Shape aSh_i = aRefSh_i->GetValue();
+
+ TopExp_Explorer anExpE_i (aSh_i, TopAbs_EDGE);
+ for (; anExpE_i.More(); anExpE_i.Next()) {
+ if (aMapEdges.Add(anExpE_i.Current())) {
+ aSeqEdgesIn->Append(anExpE_i.Current());
+ }
+ }
}
- // first wire
- Handle(GEOM_Function) aRefWire = Handle(GEOM_Function)::DownCast(aShapes->Value(1));
- TopoDS_Shape aWire = aRefWire->GetValue();
- if (aWire.IsNull() || aWire.ShapeType() != TopAbs_WIRE) {
- Standard_NullObject::Raise("Shape for face construction is null or not a wire");
+ if (aSeqEdgesIn->IsEmpty()) {
+ Standard_ConstructionError::Raise("No edges given");
}
- TopoDS_Wire W = TopoDS::Wire(aWire);
- // basic face
- //BRepBuilderAPI_MakeFace MF (W, aCI.GetIsPlanar());
- //if (!MF.IsDone()) {
- // Standard_ConstructionError::Raise("Face construction failed");
- //}
- //TopoDS_Shape FFace = MF.Shape();
- TopoDS_Shape FFace;
- GEOMImpl_Block6Explorer::MakeFace(W, aCI.GetIsPlanar(), FFace);
- if (FFace.IsNull()) {
- Standard_ConstructionError::Raise("Face construction failed");
+ // 2. Connect edges to wires of maximum length
+ Handle(TopTools_HSequenceOfShape) aSeqWiresOut;
+ ShapeAnalysis_FreeBounds::ConnectEdgesToWires(aSeqEdgesIn, Precision::Confusion(),
+ /*shared*/Standard_False, aSeqWiresOut);
+ //modified by NIZNHY-PKV Wed Dec 28 13:46:55 2011f
+ //KeepEdgesOrder(aSeqEdgesIn, aSeqWiresOut);
+ //modified by NIZNHY-PKV Wed Dec 28 13:46:59 2011t
+
+ // 3. Separate closed wires
+ Handle(TopTools_HSequenceOfShape) aSeqClosedWires = new TopTools_HSequenceOfShape;
+ Handle(TopTools_HSequenceOfShape) aSeqOpenWires = new TopTools_HSequenceOfShape;
+ for (ind = 1; ind <= aSeqWiresOut->Length(); ind++) {
+ if (aSeqWiresOut->Value(ind).Closed())
+ aSeqClosedWires->Append(aSeqWiresOut->Value(ind));
+ else
+ aSeqOpenWires->Append(aSeqWiresOut->Value(ind));
}
- if (nbshapes == 1) {
- aShape = FFace;
+ if (aSeqClosedWires->Length() < 1) {
+ Standard_ConstructionError::Raise
+ ("There is no closed contour can be built from the given arguments");
+ }
- } else {
+ // 4. Build a face / list of faces from all the obtained closed wires
+
+ // 4.a. Basic face
+ TopoDS_Shape aFFace;
+ TopoDS_Wire aW1 = TopoDS::Wire(aSeqClosedWires->Value(1));
+ aWarning = GEOMImpl_Block6Explorer::MakeFace(aW1, aCI.GetIsPlanar(), aFFace);
+ if (aFFace.IsNull()) {
+ Standard_ConstructionError::Raise("Face construction failed");
+ }
+
+ // 4.b. Add other wires
+ if (aSeqClosedWires->Length() == 1) {
+ aShape = aFFace;
+ }
+ else {
TopoDS_Compound C;
BRep_Builder aBuilder;
aBuilder.MakeCompound(C);
BRepAlgo_FaceRestrictor FR;
- TopAbs_Orientation OriF = FFace.Orientation();
- TopoDS_Shape aLocalS = FFace.Oriented(TopAbs_FORWARD);
+ TopAbs_Orientation OriF = aFFace.Orientation();
+ TopoDS_Shape aLocalS = aFFace.Oriented(TopAbs_FORWARD);
FR.Init(TopoDS::Face(aLocalS), Standard_False, Standard_True);
- for (int ind = 1; ind <= nbshapes; ind++) {
- Handle(GEOM_Function) aRefWire_i =
- Handle(GEOM_Function)::DownCast(aShapes->Value(ind));
- TopoDS_Shape aWire_i = aRefWire_i->GetValue();
- if (aWire_i.IsNull() || aWire_i.ShapeType() != TopAbs_WIRE) {
- Standard_NullObject::Raise("Shape for face construction is null or not a wire");
- }
-
- FR.Add(TopoDS::Wire(aWire_i));
+ for (ind = 1; ind <= aSeqClosedWires->Length(); ind++) {
+ TopoDS_Wire aW = TopoDS::Wire(aSeqClosedWires->Value(ind));
+ FR.Add(aW);
}
FR.Perform();
}
}
}
- } else if (aType == SHELL_FACES) {
+
+ // 5. Add all open wires to the result
+ if (aSeqOpenWires->Length() > 0) {
+ //Standard_ConstructionError::Raise("There are some open wires");
+ TopoDS_Compound C;
+ BRep_Builder aBuilder;
+ if (aSeqClosedWires->Length() == 1) {
+ aBuilder.MakeCompound(C);
+ aBuilder.Add(C, aShape);
+ }
+ else {
+ C = TopoDS::Compound(aShape);
+ }
+
+ for (ind = 1; ind <= aSeqOpenWires->Length(); ind++) {
+ aBuilder.Add(C, aSeqOpenWires->Value(ind));
+ }
+
+ aShape = C;
+ }
+ }
+ else if (aType == FACE_FROM_SURFACE) {
+ anExpectedType.push_back(TopAbs_FACE);
+
+ Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
+
+ if (aShapes.IsNull() == Standard_False) {
+ Standard_Integer aNbShapes = aShapes->Length();
+
+ if (aNbShapes == 2) {
+ Handle(GEOM_Function) aRefFace =
+ Handle(GEOM_Function)::DownCast(aShapes->Value(1));
+ Handle(GEOM_Function) aRefWire =
+ Handle(GEOM_Function)::DownCast(aShapes->Value(2));
+
+ if (aRefFace.IsNull() == Standard_False &&
+ aRefWire.IsNull() == Standard_False) {
+ TopoDS_Shape aShFace = aRefFace->GetValue();
+ TopoDS_Shape aShWire = aRefWire->GetValue();
+
+ if (aShFace.IsNull() == Standard_False &&
+ aShFace.ShapeType() == TopAbs_FACE &&
+ aShWire.IsNull() == Standard_False &&
+ aShWire.ShapeType() == TopAbs_WIRE) {
+ TopoDS_Face aFace = TopoDS::Face(aShFace);
+ TopoDS_Wire aWire = TopoDS::Wire(aShWire);
+ Handle(Geom_Surface) aSurf = BRep_Tool::Surface(aFace);
+ BRepBuilderAPI_MakeFace aMkFace(aSurf, aWire);
+
+ if (aMkFace.IsDone()) {
+ aShape = aMkFace.Shape();
+ }
+ }
+ }
+ }
+ }
+ }
+ else if (aType == SHELL_FACES) {
+ anExpectedType.push_back(TopAbs_SHELL);
+
Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
unsigned int ind, nbshapes = aShapes->Length();
// add faces
- BRepBuilderAPI_Sewing aSewing(Precision::Confusion()*10.0);
+ BRepBuilderAPI_Sewing aSewing (Precision::Confusion()*10.0);
for (ind = 1; ind <= nbshapes; ind++) {
Handle(GEOM_Function) aRefShape = Handle(GEOM_Function)::DownCast(aShapes->Value(ind));
TopoDS_Shape aShape_i = aRefShape->GetValue();
aSewing.Perform();
- TopExp_Explorer exp (aSewing.SewedShape(), TopAbs_SHELL);
- Standard_Integer ish = 0;
- for (; exp.More(); exp.Next()) {
- aShape = exp.Current();
- ish++;
- }
-
- if (ish != 1)
- aShape = aSewing.SewedShape();
+ TopoDS_Shape sh = aSewing.SewedShape();
- } else if (aType == SOLID_SHELL) {
- Handle(GEOM_Function) aRefShell = aCI.GetBase();
- TopoDS_Shape aShapeShell = aRefShell->GetValue();
- if (aShapeShell.IsNull() || aShapeShell.ShapeType() != TopAbs_SHELL) {
- Standard_NullObject::Raise("Shape for solid construction is null or not a shell");
+ if (sh.ShapeType()==TopAbs_FACE && nbshapes==1) {
+ // case for creation of shell from one face - PAL12722 (skl 26.06.2006)
+ TopoDS_Shell ss;
+ B.MakeShell(ss);
+ B.Add(ss,sh);
+ aShape = ss;
}
+ else {
+ //TopExp_Explorer exp (aSewing.SewedShape(), TopAbs_SHELL);
+ TopExp_Explorer exp (sh, TopAbs_SHELL);
+ Standard_Integer ish = 0;
+ for (; exp.More(); exp.Next()) {
+ aShape = exp.Current();
+ ish++;
+ }
- BRepCheck_Shell chkShell(TopoDS::Shell(aShapeShell));
- if(chkShell.Closed() == BRepCheck_NotClosed) return 0;
+ if (ish != 1) {
+ // try the case of one face (Mantis issue 0021809)
+ TopExp_Explorer expF (sh, TopAbs_FACE);
+ Standard_Integer ifa = 0;
+ for (; expF.More(); expF.Next()) {
+ aShape = expF.Current();
+ ifa++;
+ }
- TopoDS_Solid Sol;
- B.MakeSolid(Sol);
- B.Add(Sol, aShapeShell);
- BRepClass3d_SolidClassifier SC (Sol);
- SC.PerformInfinitePoint(Precision::Confusion());
- if (SC.State() == TopAbs_IN) {
- B.MakeSolid(Sol);
- B.Add(Sol, aShapeShell.Reversed());
+ if (ifa == 1) {
+ TopoDS_Shell ss;
+ B.MakeShell(ss);
+ B.Add(ss,aShape);
+ aShape = ss;
+ }
+ else {
+ aShape = aSewing.SewedShape();
+ }
+ }
}
- aShape = Sol;
+ }
+ else if (aType == SOLID_SHELLS) {
+ anExpectedType.push_back(TopAbs_SOLID);
- } else if (aType == SOLID_SHELLS) {
Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
unsigned int ind, nbshapes = aShapes->Length();
Standard_Integer ish = 0;
- TopoDS_Solid Sol;
- B.MakeSolid(Sol);
+ BRepBuilderAPI_MakeSolid aMkSolid;
// add shapes
for (ind = 1; ind <= nbshapes; ind++) {
if (aShapeShell.IsNull()) {
Standard_NullObject::Raise("Shell for solid construction is null");
}
+ if (aShapeShell.ShapeType() == TopAbs_COMPOUND) {
+ TopoDS_Iterator It (aShapeShell, Standard_True, Standard_True);
+ if (It.More()) aShapeShell = It.Value();
+ }
if (aShapeShell.ShapeType() == TopAbs_SHELL) {
- B.Add(Sol, aShapeShell);
+ aMkSolid.Add(TopoDS::Shell(aShapeShell));
ish++;
}
}
- if ( ish == 0 ) return 0;
+ if (ish == 0 || !aMkSolid.IsDone()) return 0;
+
+ TopoDS_Solid Sol = aMkSolid.Solid();
BRepClass3d_SolidClassifier SC (Sol);
SC.PerformInfinitePoint(Precision::Confusion());
- switch (SC.State()) {
- case TopAbs_IN:
- aShape = Sol.Reversed(); break;
- case TopAbs_OUT:
- aShape = Sol; break;
- default: // not closed shell?
- return 0;
- }
+ if (SC.State() == TopAbs_IN)
+ aShape = Sol.Reversed();
+ else
+ aShape = Sol;
+ }
+ else if (aType == COMPOUND_SHAPES) {
+ anExpectedType.push_back(TopAbs_COMPOUND);
- } else if (aType == COMPOUND_SHAPES) {
Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
unsigned int ind, nbshapes = aShapes->Length();
aShape = C;
- } else if (aType == REVERSE_ORIENTATION) {
- Handle(GEOM_Function) aRefShape = aCI.GetBase();
- TopoDS_Shape aShape_i = aRefShape->GetValue();
- if (aShape_i.IsNull()) {
- Standard_NullObject::Raise("Shape for reverse is null");
- }
-
- BRepBuilderAPI_Copy Copy(aShape_i);
- if( Copy.IsDone() ) {
- TopoDS_Shape tds = Copy.Shape();
- if( tds.IsNull() ) {
- Standard_ConstructionError::Raise("Orientation aborted : Can not reverse the shape");
+ }
+ else if (aType == EDGE_WIRE) {
+ anExpectedType.push_back(TopAbs_EDGE);
+
+ Handle(GEOM_Function) aRefBase = aCI.GetBase();
+ TopoDS_Shape aWire = aRefBase->GetValue();
+ Standard_Real LinTol = aCI.GetTolerance();
+ Standard_Real AngTol = aCI.GetAngularTolerance();
+ if (aWire.IsNull()) Standard_NullObject::Raise("Argument Wire is null");
+
+ aShape = MakeEdgeFromWire(aWire, LinTol, AngTol);
+ }
+ else if (aType == SOLID_FACES) {
+ anExpectedType.push_back(TopAbs_SOLID);
+ anExpectedType.push_back(TopAbs_COMPOUND);
+ anExpectedType.push_back(TopAbs_COMPSOLID);
+
+ Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
+ unsigned int ind, nbshapes = aShapes->Length();
+
+ // add faces
+ BOPCol_ListOfShape aLS;
+ for (ind = 1; ind <= nbshapes; ind++) {
+ Handle(GEOM_Function) aRefShape = Handle(GEOM_Function)::DownCast(aShapes->Value(ind));
+ TopoDS_Shape aShape_i = aRefShape->GetValue();
+ if (aShape_i.IsNull()) {
+ Standard_NullObject::Raise("Shape for solid construction is null");
}
+ aLS.Append(aShape_i);
+ }
- if( tds.Orientation() == TopAbs_FORWARD)
- tds.Orientation(TopAbs_REVERSED) ;
- else
- tds.Orientation(TopAbs_FORWARD) ;
+ BOPAlgo_MakerVolume aMV;
+ aMV.SetArguments(aLS);
+ aMV.SetIntersect(aCI.GetIsIntersect());
+ aMV.Perform();
+ if (aMV.ErrorStatus()) return 0;
- aShape = tds;
- }
+ aShape = aMV.Shape();
+ }
+ else if (aType == EDGE_CURVE_LENGTH) {
+ anExpectedType.push_back(TopAbs_EDGE);
+
+ GEOMImpl_IVector aVI (aFunction);
+
+ // RefCurve
+ Handle(GEOM_Function) aRefCurve = aVI.GetPoint1();
+ if (aRefCurve.IsNull()) Standard_NullObject::Raise("Argument Curve is null");
+ TopoDS_Shape aRefShape1 = aRefCurve->GetValue();
+ if (aRefShape1.ShapeType() != TopAbs_EDGE) {
+ Standard_TypeMismatch::Raise
+ ("Edge On Curve creation aborted : curve shape is not an edge");
+ }
+ TopoDS_Edge aRefEdge = TopoDS::Edge(aRefShape1);
+ TopoDS_Vertex V1, V2;
+ TopExp::Vertices(aRefEdge, V1, V2, Standard_True);
+
+ // RefPoint
+ TopoDS_Vertex aRefVertex;
+ Handle(GEOM_Function) aRefPoint = aVI.GetPoint2();
+ if (aRefPoint.IsNull()) {
+ aRefVertex = V1;
+ }
+ else {
+ TopoDS_Shape aRefShape2 = aRefPoint->GetValue();
+ if (aRefShape2.ShapeType() != TopAbs_VERTEX) {
+ Standard_TypeMismatch::Raise
+ ("Edge On Curve creation aborted : start point shape is not a vertex");
+ }
+ aRefVertex = TopoDS::Vertex(aRefShape2);
+ }
+ gp_Pnt aRefPnt = BRep_Tool::Pnt(aRefVertex);
+
+ // Length
+ Standard_Real aLength = aVI.GetParameter();
+ //Standard_Real aCurveLength = IntTools::Length(aRefEdge);
+ //if (aLength > aCurveLength) {
+ // Standard_ConstructionError::Raise
+ // ("Edge On Curve creation aborted : given length is greater than edges length");
+ //}
+ if (fabs(aLength) < Precision::Confusion()) {
+ Standard_ConstructionError::Raise
+ ("Edge On Curve creation aborted : given length is smaller than Precision::Confusion()");
+ }
+
+ // Check orientation
+ Standard_Real UFirst, ULast;
+ Handle(Geom_Curve) EdgeCurve = BRep_Tool::Curve(aRefEdge, UFirst, ULast);
+ Handle(Geom_Curve) ReOrientedCurve = EdgeCurve;
+
+ Standard_Real dU = ULast - UFirst;
+ Standard_Real par1 = UFirst + 0.1 * dU;
+ Standard_Real par2 = ULast - 0.1 * dU;
+
+ gp_Pnt P1 = EdgeCurve->Value(par1);
+ gp_Pnt P2 = EdgeCurve->Value(par2);
+
+ if (aRefPnt.SquareDistance(P2) < aRefPnt.SquareDistance(P1)) {
+ ReOrientedCurve = EdgeCurve->Reversed();
+ UFirst = EdgeCurve->ReversedParameter(ULast);
+ }
+
+ // Get the point by length
+ GeomAdaptor_Curve AdapCurve = GeomAdaptor_Curve(ReOrientedCurve);
+ GCPnts_AbscissaPoint anAbsPnt (AdapCurve, aLength, UFirst);
+ Standard_Real aParam = anAbsPnt.Parameter();
+
+ if (AdapCurve.IsClosed() && aLength < 0.0) {
+ Standard_Real aTmp = aParam;
+ aParam = UFirst;
+ UFirst = aTmp;
+ }
+
+ BRepBuilderAPI_MakeEdge aME (ReOrientedCurve, UFirst, aParam);
+ if (aME.IsDone())
+ aShape = aME.Shape();
+ } else if (aType == SHAPE_ISOLINE) {
+ GEOMImpl_IIsoline aII (aFunction);
+ Handle(GEOM_Function) aRefFace = aII.GetFace();
+ TopoDS_Shape aShapeFace = aRefFace->GetValue();
+
+ if (aShapeFace.ShapeType() == TopAbs_FACE) {
+ TopoDS_Face aFace = TopoDS::Face(aShapeFace);
+ bool isUIso = aII.GetIsUIso();
+ Standard_Real aParam = aII.GetParameter();
+ Standard_Real U1,U2,V1,V2;
+
+ // Construct a real geometric parameter.
+ aFace.Orientation(TopAbs_FORWARD);
+ ShapeAnalysis::GetFaceUVBounds(aFace,U1,U2,V1,V2);
+
+ if (isUIso) {
+ aParam = U1 + (U2 - U1)*aParam;
+ } else {
+ aParam = V1 + (V2 - V1)*aParam;
+ }
+
+ aShape = MakeIsoline(aFace, isUIso, aParam);
+ } else {
+ Standard_NullObject::Raise
+ ("Shape for isoline construction is not a face");
+ }
+ } else if (aType == EDGE_UV) {
+ anExpectedType.push_back(TopAbs_EDGE);
+ GEOMImpl_IShapeExtend aSE (aFunction);
+ Handle(GEOM_Function) aRefEdge = aSE.GetShape();
+ TopoDS_Shape aShapeEdge = aRefEdge->GetValue();
+
+ if (aShapeEdge.ShapeType() == TopAbs_EDGE) {
+ TopoDS_Edge anEdge = TopoDS::Edge(aShapeEdge);
+
+ aShape = ExtendEdge(anEdge, aSE.GetUMin(), aSE.GetUMax());
+ }
+ } else if (aType == FACE_UV) {
+ anExpectedType.push_back(TopAbs_FACE);
+
+ GEOMImpl_IShapeExtend aSE (aFunction);
+ Handle(GEOM_Function) aRefFace = aSE.GetShape();
+ TopoDS_Shape aShapeFace = aRefFace->GetValue();
+
+ if (aShapeFace.ShapeType() == TopAbs_FACE) {
+ TopoDS_Face aFace = TopoDS::Face(aShapeFace);
+
+ aFace.Orientation(TopAbs_FORWARD);
+ aShape = ExtendFace(aFace, aSE.GetUMin(), aSE.GetUMax(),
+ aSE.GetVMin(), aSE.GetVMax());
+ }
+ } else if (aType == SURFACE_FROM_FACE) {
+ anExpectedType.push_back(TopAbs_FACE);
+
+ GEOMImpl_IShapeExtend aSE (aFunction);
+ Handle(GEOM_Function) aRefFace = aSE.GetShape();
+ TopoDS_Shape aShapeFace = aRefFace->GetValue();
+
+ if (aShapeFace.ShapeType() == TopAbs_FACE) {
+ TopoDS_Face aFace = TopoDS::Face(aShapeFace);
+ Handle(Geom_Surface) aSurface = BRep_Tool::Surface(aFace);
+
+ if (aSurface.IsNull() == Standard_False) {
+ Handle(Standard_Type) aType = aSurface->DynamicType();
+ Standard_Real aU1;
+ Standard_Real aU2;
+ Standard_Real aV1;
+ Standard_Real aV2;
+
+ // Get U, V bounds of the face.
+ aFace.Orientation(TopAbs_FORWARD);
+ ShapeAnalysis::GetFaceUVBounds(aFace, aU1, aU2, aV1, aV2);
+
+ // Get the surface of original type
+ while (aType == STANDARD_TYPE(Geom_RectangularTrimmedSurface)) {
+ Handle(Geom_RectangularTrimmedSurface) aTrSurface =
+ Handle(Geom_RectangularTrimmedSurface)::DownCast(aSurface);
+
+ aSurface = aTrSurface->BasisSurface();
+ aType = aSurface->DynamicType();
+ }
+
+ const Standard_Real aTol = BRep_Tool::Tolerance(aFace);
+ BRepBuilderAPI_MakeFace aMF(aSurface, aU1, aU2, aV1, aV2, aTol);
+
+ if (aMF.IsDone()) {
+ aShape = aMF.Shape();
+ }
+ }
+ }
+ }
+ else {
}
if (aShape.IsNull()) return 0;
// Check shape validity
BRepCheck_Analyzer ana (aShape, false);
if (!ana.IsValid()) {
- Standard_ConstructionError::Raise("Algorithm have produced an invalid shape result");
+ //Standard_ConstructionError::Raise("Algorithm have produced an invalid shape result");
+ // For Mantis issue 0021772: EDF 2336 GEOM: Non valid face created from two circles
+ Handle(ShapeFix_Shape) aSfs = new ShapeFix_Shape (aShape);
+ aSfs->Perform();
+ aShape = aSfs->Shape();
+ }
+
+ // Check if the result shape type is compatible with the expected.
+ const TopAbs_ShapeEnum aShType = aShape.ShapeType();
+
+ if (!anExpectedType.empty()) {
+ bool ok = false;
+ std::list<TopAbs_ShapeEnum>::const_iterator it;
+ for (it = anExpectedType.begin(); it != anExpectedType.end() && !ok; ++it)
+ ok = (*it == TopAbs_SHAPE || *it == aShType);
+ if (!ok)
+ Standard_ConstructionError::Raise("Result type check failed");
}
aFunction->SetValue(aShape);
log.SetTouched(Label());
+ if (!aWarning.IsEmpty())
+ Standard_Failure::Raise(aWarning.ToCString());
+
return 1;
}
+TopoDS_Wire GEOMImpl_ShapeDriver::MakeWireFromEdges(const Handle(TColStd_HSequenceOfTransient)& theEdgesFuncs,
+ const Standard_Real theTolerance)
+{
+ BRep_Builder B;
-//=======================================================================
-//function : GEOMImpl_ShapeDriver_Type_
-//purpose :
-//=======================================================================
-Standard_EXPORT Handle_Standard_Type& GEOMImpl_ShapeDriver_Type_()
+ TopoDS_Wire aWire;
+ B.MakeWire(aWire);
+
+ // add edges
+ for (unsigned int ind = 1; ind <= theEdgesFuncs->Length(); ind++) {
+ Handle(GEOM_Function) aRefShape = Handle(GEOM_Function)::DownCast(theEdgesFuncs->Value(ind));
+ TopoDS_Shape aShape_i = aRefShape->GetValue();
+ if (aShape_i.IsNull()) {
+ Standard_NullObject::Raise("Shape for wire construction is null");
+ }
+ if (aShape_i.ShapeType() == TopAbs_EDGE || aShape_i.ShapeType() == TopAbs_WIRE) {
+ TopExp_Explorer exp (aShape_i, TopAbs_EDGE);
+ for (; exp.More(); exp.Next())
+ B.Add(aWire, TopoDS::Edge(exp.Current()));
+ } else {
+ Standard_TypeMismatch::Raise
+ ("Shape for wire construction is neither an edge nor a wire");
+ }
+ }
+
+ // fix edges order
+ Handle(ShapeFix_Wire) aFW = new ShapeFix_Wire;
+ aFW->Load(aWire);
+ aFW->FixReorder();
+
+ if (aFW->StatusReorder(ShapeExtend_FAIL1)) {
+ Standard_ConstructionError::Raise("Wire construction failed: several loops detected");
+ }
+ else if (aFW->StatusReorder(ShapeExtend_FAIL)) {
+ Standard_ConstructionError::Raise("Wire construction failed");
+ }
+ else {
+ }
+
+ // IMP 0019766: Building a Wire from unconnected edges by introducing a tolerance
+ aFW->ClosedWireMode() = Standard_False;
+ aFW->FixConnected(theTolerance);
+ if (aFW->StatusConnected(ShapeExtend_FAIL)) {
+ Standard_ConstructionError::Raise("Wire construction failed: cannot build connected wire");
+ }
+ // IMP 0019766
+ if (aFW->StatusConnected(ShapeExtend_DONE3)) {
+ // Confused with <prec> but not Analyzer.Precision(), set the same
+ aFW->FixGapsByRangesMode() = Standard_True;
+ if (aFW->FixGaps3d()) {
+ Handle(ShapeExtend_WireData) sbwd = aFW->WireData();
+ Handle(ShapeFix_Edge) aFe = new ShapeFix_Edge;
+ for (Standard_Integer iedge = 1; iedge <= sbwd->NbEdges(); iedge++) {
+ TopoDS_Edge aEdge = TopoDS::Edge(sbwd->Edge(iedge));
+ aFe->FixVertexTolerance(aEdge);
+ aFe->FixSameParameter(aEdge);
+ }
+ }
+ else if (aFW->StatusGaps3d(ShapeExtend_FAIL)) {
+ Standard_ConstructionError::Raise("Wire construction failed: cannot fix 3d gaps");
+ }
+ }
+ aWire = aFW->WireAPIMake();
+
+ return aWire;
+}
+
+TopoDS_Edge GEOMImpl_ShapeDriver::MakeEdgeFromWire(const TopoDS_Shape& aWire,
+ const Standard_Real LinTol,
+ const Standard_Real AngTol)
{
+ TopoDS_Edge ResEdge;
+
+ BRepLib::BuildCurves3d(aWire);
+ Handle(ShapeFix_Shape) Fixer = new ShapeFix_Shape(aWire);
+ Fixer->SetPrecision(LinTol);
+ Fixer->SetMaxTolerance(LinTol);
+ Fixer->Perform();
+ TopoDS_Wire theWire = TopoDS::Wire(Fixer->Shape());
+
+ TColGeom_SequenceOfCurve CurveSeq;
+ TopTools_SequenceOfShape LocSeq;
+ TColStd_SequenceOfReal FparSeq;
+ TColStd_SequenceOfReal LparSeq;
+ TColStd_SequenceOfReal TolSeq;
+ GeomAbs_CurveType CurType;
+ TopoDS_Vertex FirstVertex, LastVertex;
+ Standard_Real aPntShiftDist = 0.;
+
+ BRepTools_WireExplorer wexp(theWire) ;
+ for (; wexp.More(); wexp.Next())
+ {
+ TopoDS_Edge anEdge = wexp.Current();
+ Standard_Real fpar, lpar;
+ TopLoc_Location aLoc;
+ Handle(Geom_Curve) aCurve = BRep_Tool::Curve(anEdge, aLoc, fpar, lpar);
+ if (aCurve.IsNull())
+ continue;
+
+ BRepAdaptor_Curve BAcurve(anEdge);
+ GeomAbs_CurveType aType = BAcurve.GetType();
+
+ Handle(Geom_Curve) aBasisCurve = BAcurve.Curve().Curve();
+
+ if (aBasisCurve->IsPeriodic())
+ ElCLib::AdjustPeriodic(aBasisCurve->FirstParameter(), aBasisCurve->LastParameter(),
+ Precision::PConfusion(), fpar, lpar);
+
+ if (CurveSeq.IsEmpty())
+ {
+ CurveSeq.Append(aCurve);
+ TopoDS_Shape aLocShape;
+ aLocShape.Location(aLoc);
+ aLocShape.Orientation(wexp.Orientation());
+ LocSeq.Append(aLocShape);
+ FparSeq.Append(fpar);
+ LparSeq.Append(lpar);
+ CurType = aType;
+ FirstVertex = wexp.CurrentVertex();
+ }
+ else
+ {
+ Standard_Boolean Done = Standard_False;
+ Standard_Real NewFpar, NewLpar;
+ GeomAdaptor_Curve GAprevcurve(CurveSeq.Last());
+ TopoDS_Vertex CurVertex = wexp.CurrentVertex();
+ TopoDS_Vertex CurFirstVer = TopExp::FirstVertex(anEdge);
+ TopAbs_Orientation ConnectByOrigin = (CurVertex.IsSame(CurFirstVer))? TopAbs_FORWARD : TopAbs_REVERSED;
+ if (aCurve == CurveSeq.Last())
+ {
+ NewFpar = fpar;
+ NewLpar = lpar;
+ if (aBasisCurve->IsPeriodic())
+ {
+ if (NewLpar < NewFpar)
+ NewLpar += aBasisCurve->Period();
+ if (ConnectByOrigin == TopAbs_FORWARD)
+ ElCLib::AdjustPeriodic(FparSeq.Last(),
+ FparSeq.Last() + aBasisCurve->Period(),
+ Precision::PConfusion(), NewFpar, NewLpar);
+ else
+ ElCLib::AdjustPeriodic(FparSeq.Last() - aBasisCurve->Period(),
+ FparSeq.Last(),
+ Precision::PConfusion(), NewFpar, NewLpar);
+ }
+ Done = Standard_True;
+ }
+ else if (aType == CurType &&
+ aType != GeomAbs_BezierCurve &&
+ aType != GeomAbs_BSplineCurve &&
+ aType != GeomAbs_OtherCurve)
+ {
+ switch (aType)
+ {
+ case GeomAbs_Line:
+ {
+ gp_Lin aLine = BAcurve.Line();
+ gp_Lin PrevLine = GAprevcurve.Line();
+ if (aLine.Contains(PrevLine.Location(), LinTol) &&
+ aLine.Direction().IsParallel(PrevLine.Direction(), AngTol))
+ {
+ gp_Pnt P1 = ElCLib::Value(fpar, aLine);
+ gp_Pnt P2 = ElCLib::Value(lpar, aLine);
+ NewFpar = ElCLib::Parameter(PrevLine, P1);
+ NewLpar = ElCLib::Parameter(PrevLine, P2);
+
+ // Compute shift
+ if (ConnectByOrigin == TopAbs_FORWARD) {
+ gp_Pnt aNewP2 = ElCLib::Value(NewLpar, PrevLine);
+
+ aPntShiftDist += P2.Distance(aNewP2);
+ } else {
+ gp_Pnt aNewP1 = ElCLib::Value(NewFpar, PrevLine);
+
+ aPntShiftDist += P1.Distance(aNewP1);
+ }
+
+ if (NewLpar < NewFpar)
+ {
+ Standard_Real MemNewFpar = NewFpar;
+ NewFpar = NewLpar;
+ NewLpar = MemNewFpar;
+ ConnectByOrigin = TopAbs::Reverse(ConnectByOrigin);
+ }
+ Done = Standard_True;
+ }
+ break;
+ }
+ case GeomAbs_Circle:
+ {
+ gp_Circ aCircle = BAcurve.Circle();
+ gp_Circ PrevCircle = GAprevcurve.Circle();
+ if (aCircle.Location().Distance(PrevCircle.Location()) <= LinTol &&
+ Abs(aCircle.Radius() - PrevCircle.Radius()) <= LinTol &&
+ aCircle.Axis().IsParallel(PrevCircle.Axis(), AngTol))
+ {
+ const Standard_Boolean isFwd = ConnectByOrigin == TopAbs_FORWARD;
+
+ if (aCircle.Axis().Direction() * PrevCircle.Axis().Direction() < 0.)
+ {
+ Standard_Real memfpar = fpar;
+ fpar = lpar;
+ lpar = memfpar;
+ ConnectByOrigin = TopAbs::Reverse(ConnectByOrigin);
+ }
+ gp_Pnt P1 = ElCLib::Value(fpar, aCircle);
+ gp_Pnt P2 = ElCLib::Value(lpar, aCircle);
+ NewFpar = ElCLib::Parameter(PrevCircle, P1);
+ NewLpar = ElCLib::Parameter(PrevCircle, P2);
+
+ // Compute shift
+ if (isFwd) {
+ gp_Pnt aNewP2 = ElCLib::Value(NewLpar, PrevCircle);
+
+ aPntShiftDist += P2.Distance(aNewP2);
+ } else {
+ gp_Pnt aNewP1 = ElCLib::Value(NewFpar, PrevCircle);
+
+ aPntShiftDist += P1.Distance(aNewP1);
+ }
+
+ if (NewLpar < NewFpar)
+ NewLpar += 2.*M_PI;
+ //Standard_Real MemNewFpar = NewFpar, MemNewLpar = NewLpar;
+ if (ConnectByOrigin == TopAbs_FORWARD)
+ ElCLib::AdjustPeriodic(FparSeq.Last(),
+ FparSeq.Last() + 2.*M_PI,
+ Precision::PConfusion(), NewFpar, NewLpar);
+ else
+ ElCLib::AdjustPeriodic(FparSeq.Last() - 2.*M_PI,
+ FparSeq.Last(),
+ Precision::PConfusion(), NewFpar, NewLpar);
+ Done = Standard_True;
+ }
+ break;
+ }
+ case GeomAbs_Ellipse:
+ {
+ gp_Elips anEllipse = BAcurve.Ellipse();
+ gp_Elips PrevEllipse = GAprevcurve.Ellipse();
+ if (anEllipse.Focus1().Distance(PrevEllipse.Focus1()) <= LinTol &&
+ anEllipse.Focus2().Distance(PrevEllipse.Focus2()) <= LinTol &&
+ Abs(anEllipse.MajorRadius() - PrevEllipse.MajorRadius()) <= LinTol &&
+ Abs(anEllipse.MinorRadius() - PrevEllipse.MinorRadius()) <= LinTol &&
+ anEllipse.Axis().IsParallel(PrevEllipse.Axis(), AngTol))
+ {
+ const Standard_Boolean isFwd = ConnectByOrigin == TopAbs_FORWARD;
+
+ if (anEllipse.Axis().Direction() * PrevEllipse.Axis().Direction() < 0.)
+ {
+ Standard_Real memfpar = fpar;
+ fpar = lpar;
+ lpar = memfpar;
+ ConnectByOrigin = TopAbs::Reverse(ConnectByOrigin);
+ }
+ gp_Pnt P1 = ElCLib::Value(fpar, anEllipse);
+ gp_Pnt P2 = ElCLib::Value(lpar, anEllipse);
+ NewFpar = ElCLib::Parameter(PrevEllipse, P1);
+ NewLpar = ElCLib::Parameter(PrevEllipse, P2);
+
+ // Compute shift
+ if (isFwd) {
+ gp_Pnt aNewP2 = ElCLib::Value(NewLpar, PrevEllipse);
+
+ aPntShiftDist += P2.Distance(aNewP2);
+ } else {
+ gp_Pnt aNewP1 = ElCLib::Value(NewFpar, PrevEllipse);
+
+ aPntShiftDist += P1.Distance(aNewP1);
+ }
+
+ if (NewLpar < NewFpar)
+ NewLpar += 2.*M_PI;
+ if (ConnectByOrigin == TopAbs_FORWARD)
+ ElCLib::AdjustPeriodic(FparSeq.Last(),
+ FparSeq.Last() + 2.*M_PI,
+ Precision::PConfusion(), NewFpar, NewLpar);
+ else
+ ElCLib::AdjustPeriodic(FparSeq.Last() - 2.*M_PI,
+ FparSeq.Last(),
+ Precision::PConfusion(), NewFpar, NewLpar);
+ Done = Standard_True;
+ }
+ break;
+ }
+ case GeomAbs_Hyperbola:
+ {
+ gp_Hypr aHypr = BAcurve.Hyperbola();
+ gp_Hypr PrevHypr = GAprevcurve.Hyperbola();
+ if (aHypr.Focus1().Distance(PrevHypr.Focus1()) <= LinTol &&
+ aHypr.Focus2().Distance(PrevHypr.Focus2()) <= LinTol &&
+ Abs(aHypr.MajorRadius() - PrevHypr.MajorRadius()) <= LinTol &&
+ Abs(aHypr.MinorRadius() - PrevHypr.MinorRadius()) <= LinTol &&
+ aHypr.Axis().IsParallel(PrevHypr.Axis(), AngTol))
+ {
+ gp_Pnt P1 = ElCLib::Value(fpar, aHypr);
+ gp_Pnt P2 = ElCLib::Value(lpar, aHypr);
+ NewFpar = ElCLib::Parameter(PrevHypr, P1);
+ NewLpar = ElCLib::Parameter(PrevHypr, P2);
+
+ // Compute shift
+ if (ConnectByOrigin == TopAbs_FORWARD) {
+ gp_Pnt aNewP2 = ElCLib::Value(NewLpar, PrevHypr);
+
+ aPntShiftDist += P2.Distance(aNewP2);
+ } else {
+ gp_Pnt aNewP1 = ElCLib::Value(NewFpar, PrevHypr);
+
+ aPntShiftDist += P1.Distance(aNewP1);
+ }
+
+ if (NewLpar < NewFpar)
+ {
+ Standard_Real MemNewFpar = NewFpar;
+ NewFpar = NewLpar;
+ NewLpar = MemNewFpar;
+ ConnectByOrigin = TopAbs::Reverse(ConnectByOrigin);
+ }
+ Done = Standard_True;
+ }
+ break;
+ }
+ case GeomAbs_Parabola:
+ {
+ gp_Parab aParab = BAcurve.Parabola();
+ gp_Parab PrevParab = GAprevcurve.Parabola();
+ if (aParab.Location().Distance(PrevParab.Location()) <= LinTol &&
+ aParab.Focus().Distance(PrevParab.Focus()) <= LinTol &&
+ Abs(aParab.Focal() - PrevParab.Focal()) <= LinTol &&
+ aParab.Axis().IsParallel(PrevParab.Axis(), AngTol))
+ {
+ gp_Pnt P1 = ElCLib::Value(fpar, aParab);
+ gp_Pnt P2 = ElCLib::Value(lpar, aParab);
+ NewFpar = ElCLib::Parameter(PrevParab, P1);
+ NewLpar = ElCLib::Parameter(PrevParab, P2);
+
+ // Compute shift
+ if (ConnectByOrigin == TopAbs_FORWARD) {
+ gp_Pnt aNewP2 = ElCLib::Value(NewLpar, PrevParab);
+
+ aPntShiftDist += P2.Distance(aNewP2);
+ } else {
+ gp_Pnt aNewP1 = ElCLib::Value(NewFpar, PrevParab);
+
+ aPntShiftDist += P1.Distance(aNewP1);
+ }
+
+ if (NewLpar < NewFpar)
+ {
+ Standard_Real MemNewFpar = NewFpar;
+ NewFpar = NewLpar;
+ NewLpar = MemNewFpar;
+ ConnectByOrigin = TopAbs::Reverse(ConnectByOrigin);
+ }
+ Done = Standard_True;
+ }
+ break;
+ }
+ } //end of switch (aType)
+ } // end of else if (aType == CurType && ...
+ if (Done)
+ {
+ if (NewFpar < FparSeq.Last())
+ FparSeq(FparSeq.Length()) = NewFpar;
+ else
+ LparSeq(LparSeq.Length()) = NewLpar;
+ }
+ else
+ {
+ CurveSeq.Append(aCurve);
+ TopoDS_Shape aLocShape;
+ aLocShape.Location(aLoc);
+ aLocShape.Orientation(wexp.Orientation());
+ LocSeq.Append(aLocShape);
+ FparSeq.Append(fpar);
+ LparSeq.Append(lpar);
+ TolSeq.Append(aPntShiftDist + BRep_Tool::Tolerance(CurVertex));
+ aPntShiftDist = 0.;
+ CurType = aType;
+ }
+ } // end of else (CurveSeq.IsEmpty()) -> not first time
+ } // end for (; wexp.More(); wexp.Next())
+
+ LastVertex = wexp.CurrentVertex();
+ TolSeq.Append(aPntShiftDist + BRep_Tool::Tolerance(LastVertex));
+
+ FirstVertex.Orientation(TopAbs_FORWARD);
+ LastVertex.Orientation(TopAbs_REVERSED);
+
+ if (!CurveSeq.IsEmpty())
+ {
+ Standard_Integer nb_curve = CurveSeq.Length(); //number of curves
+ TColGeom_Array1OfBSplineCurve tab(0,nb_curve-1); //array of the curves
+ TColStd_Array1OfReal tabtolvertex(0,nb_curve-1); //(0,nb_curve-2); //array of the tolerances
+
+ Standard_Integer i;
+
+ if (nb_curve > 1)
+ {
+ for (i = 1; i <= nb_curve; i++)
+ {
+ if (CurveSeq(i)->IsInstance(STANDARD_TYPE(Geom_TrimmedCurve)))
+ CurveSeq(i) = (*((Handle(Geom_TrimmedCurve)*)&(CurveSeq(i))))->BasisCurve();
+
+ Handle(Geom_TrimmedCurve) aTrCurve = new Geom_TrimmedCurve(CurveSeq(i), FparSeq(i), LparSeq(i));
+ tab(i-1) = GeomConvert::CurveToBSplineCurve(aTrCurve);
+ tab(i-1)->Transform(LocSeq(i).Location().Transformation());
+ GeomConvert::C0BSplineToC1BSplineCurve(tab(i-1), Precision::Confusion());
+ if (LocSeq(i).Orientation() == TopAbs_REVERSED)
+ tab(i-1)->Reverse();
+
+ //Temporary
+ //char* name = new char[100];
+ //sprintf(name, "c%d", i);
+ //DrawTrSurf::Set(name, tab(i-1));
+
+ if (i > 1)
+ tabtolvertex(i-2) = TolSeq(i-1);
+ } // end for (i = 1; i <= nb_curve; i++)
+ tabtolvertex(nb_curve-1) = TolSeq(TolSeq.Length());
+
+ Standard_Boolean closed_flag = Standard_False;
+ Standard_Real closed_tolerance = 0.;
+ if (FirstVertex.IsSame(LastVertex) &&
+ GeomLProp::Continuity(tab(0), tab(nb_curve-1),
+ tab(0)->FirstParameter(),
+ tab(nb_curve-1)->LastParameter(),
+ Standard_False, Standard_False, LinTol, AngTol) >= GeomAbs_G1)
+ {
+ closed_flag = Standard_True ;
+ closed_tolerance = BRep_Tool::Tolerance(FirstVertex);
+ }
+
+ Handle(TColGeom_HArray1OfBSplineCurve) concatcurve; //array of the concatenated curves
+ Handle(TColStd_HArray1OfInteger) ArrayOfIndices; //array of the remining Vertex
+ GeomConvert::ConcatC1(tab,
+ tabtolvertex,
+ ArrayOfIndices,
+ concatcurve,
+ closed_flag,
+ closed_tolerance); //C1 concatenation
+
+ if (concatcurve->Length() > 1)
+ {
+ GeomConvert_CompCurveToBSplineCurve Concat(concatcurve->Value(concatcurve->Lower()));
+
+ for (i = concatcurve->Lower()+1; i <= concatcurve->Upper(); i++)
+ Concat.Add( concatcurve->Value(i), LinTol, Standard_True );
+
+ concatcurve->SetValue(concatcurve->Lower(), Concat.BSplineCurve());
+ }
+ // rnc : prevents the driver from building an edge without C1 continuity
+ if (concatcurve->Value(concatcurve->Lower())->Continuity()==GeomAbs_C0){
+ Standard_ConstructionError::Raise("Construction aborted : The given Wire has sharp bends between some Edges, no valid Edge can be built");
+ }
+
+ Standard_Boolean isValidEndVtx = Standard_True;
+
+ if (closed_flag) {
+ // Check if closed curve is reordered.
+ Handle(Geom_Curve) aCurve = concatcurve->Value(concatcurve->Lower());
+ Standard_Real aFPar = aCurve->FirstParameter();
+ gp_Pnt aPFirst;
+ gp_Pnt aPntVtx = BRep_Tool::Pnt(FirstVertex);
+ Standard_Real aTolVtx = BRep_Tool::Tolerance(FirstVertex);
+
+ aCurve->D0(aFPar, aPFirst);
+
+ if (!aPFirst.IsEqual(aPntVtx, aTolVtx)) {
+ // The curve is reordered. Find the new first and last vertices.
+ TopTools_IndexedMapOfShape aMapVtx;
+ TopExp::MapShapes(theWire, TopAbs_VERTEX, aMapVtx);
+
+ const Standard_Integer aNbVtx = aMapVtx.Extent();
+ Standard_Integer iVtx;
+
+ for (iVtx = 1; iVtx <= aNbVtx; iVtx++) {
+ const TopoDS_Vertex aVtx = TopoDS::Vertex(aMapVtx.FindKey(iVtx));
+ const gp_Pnt aPnt = BRep_Tool::Pnt(aVtx);
+ const Standard_Real aTol = BRep_Tool::Tolerance(aVtx);
+
+ if (aPFirst.IsEqual(aPnt, aTol)) {
+ // The coinsident vertex is found.
+ FirstVertex = aVtx;
+ LastVertex = aVtx;
+ FirstVertex.Orientation(TopAbs_FORWARD);
+ LastVertex.Orientation(TopAbs_REVERSED);
+ break;
+ }
+ }
+
+ if (iVtx > aNbVtx) {
+ // It is necessary to create new vertices.
+ isValidEndVtx = Standard_False;
+ }
+ }
+ }
+
+ if (isValidEndVtx) {
+ ResEdge = BRepLib_MakeEdge(concatcurve->Value(concatcurve->Lower()),
+ FirstVertex, LastVertex,
+ concatcurve->Value(concatcurve->Lower())->FirstParameter(),
+ concatcurve->Value(concatcurve->Lower())->LastParameter());
+ } else {
+ ResEdge = BRepLib_MakeEdge(concatcurve->Value(concatcurve->Lower()),
+ concatcurve->Value(concatcurve->Lower())->FirstParameter(),
+ concatcurve->Value(concatcurve->Lower())->LastParameter());
+ }
+ }
+ else
+ {
+ if (CurveSeq(1)->IsInstance(STANDARD_TYPE(Geom_TrimmedCurve)))
+ CurveSeq(1) = (*((Handle(Geom_TrimmedCurve)*)&(CurveSeq(1))))->BasisCurve();
+
+ Handle(Geom_Curve) aNewCurve =
+ Handle(Geom_Curve)::DownCast(CurveSeq(1)->Copy());
+
+ aNewCurve->Transform(LocSeq(1).Location().Transformation());
+
+ if (LocSeq(1).Orientation() == TopAbs_REVERSED) {
+ const TopoDS_Vertex aVtxTmp = FirstVertex;
- static Handle_Standard_Type aType1 = STANDARD_TYPE(TFunction_Driver);
- if ( aType1.IsNull()) aType1 = STANDARD_TYPE(TFunction_Driver);
- static Handle_Standard_Type aType2 = STANDARD_TYPE(MMgt_TShared);
- if ( aType2.IsNull()) aType2 = STANDARD_TYPE(MMgt_TShared);
- static Handle_Standard_Type aType3 = STANDARD_TYPE(Standard_Transient);
- if ( aType3.IsNull()) aType3 = STANDARD_TYPE(Standard_Transient);
+ FirstVertex = LastVertex;
+ LastVertex = aVtxTmp;
+ FirstVertex.Orientation(TopAbs_FORWARD);
+ LastVertex.Orientation(TopAbs_REVERSED);
+ }
+ ResEdge = BRepLib_MakeEdge(aNewCurve,
+ FirstVertex, LastVertex,
+ FparSeq(1), LparSeq(1));
- static Handle_Standard_Transient _Ancestors[]= {aType1,aType2,aType3,NULL};
- static Handle_Standard_Type _aType = new Standard_Type("GEOMImpl_ShapeDriver",
- sizeof(GEOMImpl_ShapeDriver),
- 1,
- (Standard_Address)_Ancestors,
- (Standard_Address)NULL);
+ if (LocSeq(1).Orientation() == TopAbs_REVERSED) {
+ ResEdge.Reverse();
+ }
+ }
+ }
- return _aType;
+ return ResEdge;
}
-//=======================================================================
-//function : DownCast
-//purpose :
-//=======================================================================
-const Handle(GEOMImpl_ShapeDriver) Handle(GEOMImpl_ShapeDriver)::DownCast(const Handle(Standard_Transient)& AnObject)
+//=============================================================================
+/*!
+ * \brief Returns an isoline for a face.
+ */
+//=============================================================================
+
+TopoDS_Shape GEOMImpl_ShapeDriver::MakeIsoline
+ (const TopoDS_Face &theFace,
+ const bool IsUIso,
+ const double theParameter) const
{
- Handle(GEOMImpl_ShapeDriver) _anOtherObject;
+ TopoDS_Shape aResult;
+ GEOMUtils::Hatcher aHatcher(theFace);
+ const GeomAbs_IsoType aType = (IsUIso ? GeomAbs_IsoU : GeomAbs_IsoV);
+
+ aHatcher.Init(aType, theParameter);
+ aHatcher.Perform();
+
+ if (!aHatcher.IsDone()) {
+ Standard_ConstructionError::Raise("MakeIsoline : Hatcher failure");
+ }
+
+ const Handle(TColStd_HArray1OfInteger) &anIndices =
+ (IsUIso ? aHatcher.GetUIndices() : aHatcher.GetVIndices());
- if (!AnObject.IsNull()) {
- if (AnObject->IsKind(STANDARD_TYPE(GEOMImpl_ShapeDriver))) {
- _anOtherObject = Handle(GEOMImpl_ShapeDriver)((Handle(GEOMImpl_ShapeDriver)&)AnObject);
- }
+ if (anIndices.IsNull()) {
+ Standard_ConstructionError::Raise("MakeIsoline : Null hatching indices");
}
- return _anOtherObject ;
+ const Standard_Integer anIsoInd = anIndices->Lower();
+ const Standard_Integer aHatchingIndex = anIndices->Value(anIsoInd);
+
+ if (aHatchingIndex == 0) {
+ Standard_ConstructionError::Raise("MakeIsoline : Invalid hatching index");
+ }
+
+ const Standard_Integer aNbDomains =
+ aHatcher.GetNbDomains(aHatchingIndex);
+
+ if (aNbDomains < 0) {
+ Standard_ConstructionError::Raise("MakeIsoline : Invalid number of domains");
+ }
+
+ // The hatching is performed successfully. Create the 3d Curve.
+ Handle(Geom_Surface) aSurface = BRep_Tool::Surface(theFace);
+ Handle(Geom_Curve) anIsoCurve = (IsUIso ?
+ aSurface->UIso(theParameter) : aSurface->VIso(theParameter));
+ Handle(Geom2d_Curve) aPIsoCurve =
+ aHatcher.GetHatching(aHatchingIndex);
+ const Standard_Real aTol = Precision::Confusion();
+ Standard_Integer anIDom = 1;
+ Standard_Real aV1;
+ Standard_Real aV2;
+ BRep_Builder aBuilder;
+ Standard_Integer aNbEdges = 0;
+
+ for (; anIDom <= aNbDomains; anIDom++) {
+ if (aHatcher.GetDomain(aHatchingIndex, anIDom, aV1, aV2)) {
+ // Check first and last parameters.
+ if (!aHatcher.IsDomainInfinite(aHatchingIndex, anIDom)) {
+ // Create an edge.
+ TopoDS_Edge anEdge = BRepBuilderAPI_MakeEdge(anIsoCurve, aV1, aV2);
+
+ // Update it with a parametric curve on face.
+ aBuilder.UpdateEdge(anEdge, aPIsoCurve, theFace, aTol);
+ aNbEdges++;
+
+ if (aNbEdges > 1) {
+ // Result is a compond.
+ if (aNbEdges == 2) {
+ // Create a new compound.
+ TopoDS_Compound aCompound;
+
+ aBuilder.MakeCompound(aCompound);
+ aBuilder.Add(aCompound, aResult);
+ aResult = aCompound;
+ }
+
+ // Add an edge to the compound.
+ aBuilder.Add(aResult, anEdge);
+ } else {
+ // Result is the edge.
+ aResult = anEdge;
+ }
+ }
+ }
+ }
+
+ if (aNbEdges == 0) {
+ Standard_ConstructionError::Raise("MakeIsoline : Empty result");
+ }
+
+ return aResult;
+}
+
+//=============================================================================
+/*!
+ * \brief Returns an extended edge.
+ */
+//=============================================================================
+
+TopoDS_Shape GEOMImpl_ShapeDriver::ExtendEdge
+ (const TopoDS_Edge &theEdge,
+ const Standard_Real theMin,
+ const Standard_Real theMax) const
+{
+ TopoDS_Shape aResult;
+ Standard_Real aF;
+ Standard_Real aL;
+ Handle(Geom_Curve) aCurve = BRep_Tool::Curve(theEdge, aF, aL);
+ const Standard_Real aTol = BRep_Tool::Tolerance(theEdge);
+ Standard_Real aRange2d = aL - aF;
+
+ if (aCurve.IsNull() == Standard_False && aRange2d > aTol) {
+ Standard_Real aMin = aF + aRange2d*theMin;
+ Standard_Real aMax = aF + aRange2d*theMax;
+
+ Handle(Standard_Type) aType = aCurve->DynamicType();
+
+ // Get the curve of original type
+ while (aType == STANDARD_TYPE(Geom_TrimmedCurve)) {
+ Handle(Geom_TrimmedCurve) aTrCurve =
+ Handle(Geom_TrimmedCurve)::DownCast(aCurve);
+
+ aCurve = aTrCurve->BasisCurve();
+ aType = aCurve->DynamicType();
+ }
+
+ if (aCurve->IsPeriodic()) {
+ // The curve is periodic. Check if a new range is less then a period.
+ if (aMax - aMin > aCurve->Period()) {
+ aMax = aMin + aCurve->Period();
+ }
+ } else {
+ // The curve is not periodic. Check if aMin and aMax within bounds.
+ aMin = Max(aMin, aCurve->FirstParameter());
+ aMax = Min(aMax, aCurve->LastParameter());
+ }
+
+ if (aMax - aMin > aTol) {
+ // Create a new edge.
+ BRepBuilderAPI_MakeEdge aME (aCurve, aMin, aMax);
+
+ if (aME.IsDone()) {
+ aResult = aME.Shape();
+ }
+ }
+ }
+
+ return aResult;
+}
+
+//=============================================================================
+/*!
+ * \brief Returns an extended face.
+ */
+//=============================================================================
+
+TopoDS_Shape GEOMImpl_ShapeDriver::ExtendFace
+ (const TopoDS_Face &theFace,
+ const Standard_Real theUMin,
+ const Standard_Real theUMax,
+ const Standard_Real theVMin,
+ const Standard_Real theVMax) const
+{
+ TopoDS_Shape aResult;
+ Handle(Geom_Surface) aSurface = BRep_Tool::Surface(theFace);
+ const Standard_Real aTol = BRep_Tool::Tolerance(theFace);
+ Standard_Real aU1;
+ Standard_Real aU2;
+ Standard_Real aV1;
+ Standard_Real aV2;
+
+ // Get U, V bounds of the face.
+ ShapeAnalysis::GetFaceUVBounds(theFace, aU1, aU2, aV1, aV2);
+
+ const Standard_Real aURange = aU2 - aU1;
+ const Standard_Real aVRange = aV2 - aV1;
+
+ if (aSurface.IsNull() == Standard_False &&
+ aURange > aTol && aURange > aTol) {
+ Handle(Standard_Type) aType = aSurface->DynamicType();
+
+ // Get the surface of original type
+ while (aType == STANDARD_TYPE(Geom_RectangularTrimmedSurface)) {
+ Handle(Geom_RectangularTrimmedSurface) aTrSurface =
+ Handle(Geom_RectangularTrimmedSurface)::DownCast(aSurface);
+
+ aSurface = aTrSurface->BasisSurface();
+ aType = aSurface->DynamicType();
+ }
+
+ Standard_Real aUMin = aU1 + aURange*theUMin;
+ Standard_Real aUMax = aU1 + aURange*theUMax;
+ Standard_Real aVMin = aV1 + aVRange*theVMin;
+ Standard_Real aVMax = aV1 + aVRange*theVMax;
+
+ aSurface->Bounds(aU1, aU2, aV1, aV2);
+
+ if (aSurface->IsUPeriodic()) {
+ // The surface is U-periodic. Check if a new U range is less
+ // then a period.
+ if (aUMax - aUMin > aSurface->UPeriod()) {
+ aUMax = aUMin + aSurface->UPeriod();
+ }
+ } else {
+ // The surface is not V-periodic. Check if aUMin and aUMax
+ // within bounds.
+ aUMin = Max(aUMin, aU1);
+ aUMax = Min(aUMax, aU2);
+ }
+
+ if (aSurface->IsVPeriodic()) {
+ // The surface is V-periodic. Check if a new V range is less
+ // then a period.
+ if (aVMax - aVMin > aSurface->VPeriod()) {
+ aVMax = aVMin + aSurface->VPeriod();
+ }
+ } else {
+ // The surface is not V-periodic. Check if aVMin and aVMax
+ // within bounds.
+ aVMin = Max(aVMin, aV1);
+ aVMax = Min(aVMax, aV2);
+ }
+
+ if (aUMax - aUMin > aTol && aVMax - aVMin > aTol) {
+ // Create a new edge.
+ BRepBuilderAPI_MakeFace aMF
+ (aSurface, aUMin, aUMax, aVMin, aVMax, aTol);
+
+ if (aMF.IsDone()) {
+ aResult = aMF.Shape();
+ }
+ }
+ }
+
+ return aResult;
+}
+
+//================================================================================
+/*!
+ * \brief Returns a name of creation operation and names and values of creation parameters
+ */
+//================================================================================
+
+bool GEOMImpl_ShapeDriver::
+GetCreationInformation(std::string& theOperationName,
+ std::vector<GEOM_Param>& theParams)
+{
+ if (Label().IsNull()) return 0;
+ Handle(GEOM_Function) function = GEOM_Function::GetFunction(Label());
+
+ GEOMImpl_IShapes aCI( function );
+ Standard_Integer aType = function->GetType();
+
+ switch ( aType ) {
+ case WIRE_EDGES:
+ theOperationName = "WIRE";
+ AddParam( theParams, "Wires/edges", aCI.GetShapes() );
+ AddParam( theParams, "Tolerance", aCI.GetTolerance() );
+ break;
+ case FACE_WIRE:
+ theOperationName = "FACE";
+ AddParam( theParams, "Wire/edge", aCI.GetBase() );
+ AddParam( theParams, "Is planar wanted", aCI.GetIsPlanar() );
+ break;
+ case FACE_WIRES:
+ theOperationName = "FACE";
+ AddParam( theParams, "Wires/edges", aCI.GetShapes() );
+ AddParam( theParams, "Is planar wanted", aCI.GetIsPlanar() );
+ break;
+ case FACE_FROM_SURFACE:
+ {
+ theOperationName = "FACE";
+
+ Handle(TColStd_HSequenceOfTransient) shapes = aCI.GetShapes();
+
+ if (shapes.IsNull() == Standard_False) {
+ Standard_Integer aNbShapes = shapes->Length();
+
+ if (aNbShapes > 0) {
+ AddParam(theParams, "Face", shapes->Value(1));
+
+ if (aNbShapes > 1) {
+ AddParam(theParams, "Wire", shapes->Value(2));
+ }
+ }
+ }
+ break;
+ }
+ case SHELL_FACES:
+ theOperationName = "SHELL";
+ AddParam( theParams, "Objects", aCI.GetShapes() );
+ break;
+ case SOLID_SHELLS:
+ theOperationName = "SOLID";
+ AddParam( theParams, "Objects", aCI.GetShapes() );
+ break;
+ case SOLID_FACES:
+ theOperationName = "SOLID_FROM_FACES";
+ AddParam( theParams, "Objects", aCI.GetShapes() );
+ AddParam( theParams, "Is intersect", aCI.GetIsIntersect() );
+ break;
+ case COMPOUND_SHAPES:
+ theOperationName = "COMPOUND";
+ AddParam( theParams, "Objects", aCI.GetShapes() );
+ break;
+ case EDGE_WIRE:
+ theOperationName = "EDGE";
+ AddParam( theParams, "Wire", aCI.GetBase() );
+ AddParam( theParams, "Linear Tolerance", aCI.GetTolerance() );
+ AddParam( theParams, "Angular Tolerance", aCI.GetAngularTolerance() );
+ break;
+ case EDGE_CURVE_LENGTH:
+ theOperationName = "EDGE";
+ {
+ GEOMImpl_IVector aCI( function );
+ AddParam( theParams, "Edge", aCI.GetPoint1() );
+ AddParam( theParams, "Start point", aCI.GetPoint2() );
+ AddParam( theParams, "Length", aCI.GetParameter() );
+ }
+ break;
+ case SHAPES_ON_SHAPE:
+ {
+ theOperationName = "GetShapesOnShapeAsCompound";
+ Handle(TColStd_HSequenceOfTransient) shapes = aCI.GetShapes();
+ if ( !shapes.IsNull() && shapes->Length() > 0 )
+ AddParam( theParams, "Check shape", shapes->Value(1) );
+ if ( !shapes.IsNull() && shapes->Length() > 1 )
+ AddParam( theParams, "Shape", shapes->Value(2) );
+ AddParam( theParams, "Shape type", TopAbs_ShapeEnum( aCI.GetSubShapeType() ));
+ AddParam( theParams, "State", TopAbs_State((int) aCI.GetTolerance() ));
+ break;
+ }
+ case SHAPE_ISOLINE:
+ {
+ GEOMImpl_IIsoline aII (function);
+
+ theOperationName = "ISOLINE";
+ AddParam(theParams, "Face", aII.GetFace());
+ AddParam(theParams, "Isoline type", (aII.GetIsUIso() ? "U" : "V"));
+ AddParam(theParams, "Parameter", aII.GetParameter());
+ break;
+ }
+ case EDGE_UV:
+ {
+ GEOMImpl_IShapeExtend aSE (function);
+
+ theOperationName = "EDGE_EXTEND";
+ AddParam(theParams, "Edge", aSE.GetShape());
+ AddParam(theParams, "Min", aSE.GetUMin());
+ AddParam(theParams, "Max", aSE.GetUMax());
+ break;
+ }
+ case FACE_UV:
+ {
+ GEOMImpl_IShapeExtend aSE (function);
+
+ theOperationName = "FACE_EXTEND";
+ AddParam(theParams, "Face", aSE.GetShape());
+ AddParam(theParams, "UMin", aSE.GetUMin());
+ AddParam(theParams, "UMax", aSE.GetUMax());
+ AddParam(theParams, "VMin", aSE.GetVMin());
+ AddParam(theParams, "VMax", aSE.GetVMax());
+ break;
+ }
+ case SURFACE_FROM_FACE:
+ {
+ GEOMImpl_IShapeExtend aSE (function);
+
+ theOperationName = "SURFACE_FROM_FACE";
+ AddParam(theParams, "Face", aSE.GetShape());
+ break;
+ }
+ default:
+ return false;
+ }
+
+ return true;
+}
+
+IMPLEMENT_STANDARD_HANDLE (GEOMImpl_ShapeDriver,GEOM_BaseDriver);
+IMPLEMENT_STANDARD_RTTIEXT (GEOMImpl_ShapeDriver,GEOM_BaseDriver);
+
+//modified by NIZNHY-PKV Wed Dec 28 13:48:31 2011f
+#include <TopoDS_Iterator.hxx>
+#include <TopTools_HSequenceOfShape.hxx>
+#include <ShapeAnalysis_FreeBounds.hxx>
+#include <TopTools_MapOfShape.hxx>
+#include <TopTools_MapOfOrientedShape.hxx>
+#include <BRep_Builder.hxx>
+#include <TopoDS_Wire.hxx>
+
+//=======================================================================
+//function : KeepEdgesOrder
+//purpose :
+//=======================================================================
+/*
+void KeepEdgesOrder(const Handle(TopTools_HSequenceOfShape)& aEdges,
+ const Handle(TopTools_HSequenceOfShape)& aWires)
+{
+ Standard_Integer aNbWires, aNbEdges;
+ //
+ if (aEdges.IsNull()) {
+ return;
+ }
+ //
+ if (aWires.IsNull()) {
+ return;
+ }
+ //
+ aNbEdges=aEdges->Length();
+ aNbWires=aWires->Length();
+ if (!aNbEdges || !aNbWires) {
+ return;
+ }
+ //-----
+ Standard_Boolean bClosed;
+ Standard_Integer i, j;
+ TopoDS_Wire aWy;
+ TopoDS_Iterator aIt;
+ BRep_Builder aBB;
+ TopTools_MapOfOrientedShape aMEx;
+ //
+ for (i=1; i<=aNbWires; ++i) {
+ const TopoDS_Shape& aWx=aWires->Value(i);
+ //
+ aMEx.Clear();
+ aIt.Initialize (aWx);
+ for (; aIt.More(); aIt.Next()) {
+ const TopoDS_Shape& aEx=aIt.Value();
+ aMEx.Add(aEx);
+ }
+ // aWy
+ aBB.MakeWire (aWy);
+ for (j=1; j<=aNbEdges; ++j) {
+ const TopoDS_Shape& aE=aEdges->Value(j);
+ if (aMEx.Contains(aE)) {
+ aBB.Add(aWy, aE);
+ }
+ }
+ //
+ bClosed=aWx.Closed();
+ aWy.Closed(bClosed);
+ //
+ aWires->Append(aWy);
+ }// for (i=1; i<=aNbWires; ++i) {
+ //
+ aWires->Remove(1, aNbWires);
}
+*/
+//modified by NIZNHY-PKV Wed Dec 28 13:48:34 2011t