-// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#include <GEOMImpl_ShapeDriver.hxx>
+#include <GEOMImpl_IExtract.hxx>
#include <GEOMImpl_IIsoline.hxx>
#include <GEOMImpl_IShapes.hxx>
+#include <GEOMImpl_IShapeExtend.hxx>
#include <GEOMImpl_IVector.hxx>
#include <GEOMImpl_Types.hxx>
#include <GEOMImpl_Block6Explorer.hxx>
#include <GEOM_Function.hxx>
#include <GEOMUtils_Hatcher.hxx>
+#include <GEOMAlgo_State.hxx>
+#include <GEOMAlgo_Extractor.hxx>
// OCCT Includes
#include <ShapeFix_Wire.hxx>
#include <BRepAlgo_FaceRestrictor.hxx>
#include <BRepBuilderAPI_Copy.hxx>
#include <BRepBuilderAPI_Sewing.hxx>
+#include <BRepBuilderAPI_MakeFace.hxx>
#include <BRepBuilderAPI_MakeWire.hxx>
#include <BRepBuilderAPI_MakeEdge.hxx>
#include <BRepBuilderAPI_MakeSolid.hxx>
#include <ShapeAnalysis.hxx>
#include <ShapeAnalysis_FreeBounds.hxx>
+#include <TNaming_CopyShape.hxx>
+
#include <TopAbs.hxx>
#include <TopExp.hxx>
#include <TopExp_Explorer.hxx>
#include <TopoDS_Compound.hxx>
#include <TopoDS_Iterator.hxx>
+#include <TopTools_ListIteratorOfListOfShape.hxx>
+#include <TopTools_ListOfShape.hxx>
#include <TopTools_MapOfShape.hxx>
#include <TopTools_HSequenceOfShape.hxx>
#include <GCPnts_AbscissaPoint.hxx>
#include <Geom_TrimmedCurve.hxx>
+#include <Geom_RectangularTrimmedSurface.hxx>
#include <Geom_Surface.hxx>
#include <GeomAbs_CurveType.hxx>
#include <GeomConvert_CompCurveToBSplineCurve.hxx>
#include <GeomConvert.hxx>
#include <GeomLProp.hxx>
+#include <TColStd_IndexedDataMapOfTransientTransient.hxx>
#include <TColStd_SequenceOfReal.hxx>
#include <TColStd_HSequenceOfTransient.hxx>
#include <TColStd_Array1OfReal.hxx>
#include <Standard_TypeMismatch.hxx>
#include <Standard_ConstructionError.hxx>
+#include <BOPAlgo_PaveFiller.hxx>
+#include <BOPAlgo_MakerVolume.hxx>
+
+#include <list>
+
+/**
+ * \brief This static function converts the list of shapes into an array
+ * of their IDs. If the input list is empty, null handle will be returned.
+ * this method doesn't check if a shape presents in theIndices map.
+ *
+ * \param theListOfShapes the list of shapes.
+ * \param theIndices the indexed map of shapes.
+ * \return the array of shape IDs.
+ */
+static Handle(TColStd_HArray1OfInteger) GetShapeIDs
+ (const TopTools_ListOfShape &theListOfShapes,
+ const TopTools_IndexedMapOfShape &theIndices)
+{
+ Handle(TColStd_HArray1OfInteger) aResult;
+
+ if (!theListOfShapes.IsEmpty()) {
+ const Standard_Integer aNbShapes = theListOfShapes.Extent();
+ TopTools_ListIteratorOfListOfShape anIter(theListOfShapes);
+ Standard_Integer i;
+
+ aResult = new TColStd_HArray1OfInteger(1, aNbShapes);
+
+ for (i = 1; anIter.More(); anIter.Next(), ++i) {
+ const TopoDS_Shape &aShape = anIter.Value();
+ const Standard_Integer anIndex = theIndices.FindIndex(aShape);
+
+ aResult->SetValue(i, anIndex);
+ }
+ }
+
+ return aResult;
+}
+
+namespace
+{
+ // check that compound includes only shapes of expected type
+ bool checkCompound( TopoDS_Shape& c, TopAbs_ShapeEnum t )
+ {
+ TopoDS_Iterator it( c, Standard_True, Standard_True );
+
+ // empty compound is OK only if we explicitly create a compound of shapes
+ bool result = true;
+
+ // => if expected type is TopAbs_SHAPE, we allow compound consisting of any shapes, this above check is enough
+ // => otherwise we have to check compound's content
+ // => compound sometimes can contain enclosed compound(s), we process them recursively and rebuild initial compound
+
+ if ( t != TopAbs_SHAPE ) {
+ result = it.More();
+ std::list<TopoDS_Shape> compounds, shapes;
+ compounds.push_back( c );
+ while ( !compounds.empty() && result ) {
+ // check that compound contains only shapes of expected type
+ TopoDS_Shape cc = compounds.front();
+ compounds.pop_front();
+ it.Initialize( cc, Standard_True, Standard_True );
+ for ( ; it.More() && result; it.Next() ) {
+ TopAbs_ShapeEnum tt = it.Value().ShapeType();
+ if ( tt == TopAbs_COMPOUND || tt == TopAbs_COMPSOLID ) {
+ compounds.push_back( it.Value() );
+ continue;
+ }
+ shapes.push_back( it.Value() );
+ result = tt == t;
+ }
+ }
+ if ( result ) {
+ if ( shapes.empty() ) {
+ result = false;
+ }
+ else if ( shapes.size() == 1 ) {
+ c = shapes.front();
+ }
+ else {
+ BRep_Builder b;
+ TopoDS_Compound newc;
+ b.MakeCompound( newc );
+ std::list<TopoDS_Shape> ::const_iterator sit;
+ for ( sit = shapes.begin(); sit != shapes.end(); ++sit )
+ b.Add( newc, *sit );
+ c = newc;
+ }
+ }
+ }
+
+ return result;
+ }
+
+ /**
+ * This function adds faces from the input shape into the list of faces. If
+ * the input shape is a face, it is added itself. If it is a shell, its
+ * sub-shapes (faces) are added. If it is a compound, its sub-shapes
+ * (faces or shells) are added in the list. For null shapes and for other
+ * types of shapes an exception is thrown.
+ *
+ * @param theShape the shape to be added. Either face or shell or a compound
+ * of faces and/or shells.
+ * @param theListFaces the list of faces that is modified on output.
+ * @param theMapFence the map that protects from adding the same faces in
+ * the list.
+ */
+ void addFaces(const TopoDS_Shape &theShape,
+ TopTools_ListOfShape &theListFaces,
+ TopTools_MapOfShape &theMapFence)
+ {
+ if (theShape.IsNull()) {
+ Standard_NullObject::Raise("Face for shell construction is null");
+ }
+
+ // Append the shape is the mapFence
+ if (theMapFence.Add(theShape)) {
+ // Shape type
+ const TopAbs_ShapeEnum aType = theShape.ShapeType();
+
+ if (aType == TopAbs_FACE) {
+ theListFaces.Append(theShape);
+ } else if (aType == TopAbs_SHELL || aType == TopAbs_COMPOUND) {
+ TopoDS_Iterator anIter(theShape);
+
+ for (; anIter.More(); anIter.Next()) {
+ // Add sub-shapes: faces for shell or faces/shells for compound.
+ const TopoDS_Shape &aSubShape = anIter.Value();
+
+ addFaces(aSubShape, theListFaces, theMapFence);
+ }
+ } else {
+ Standard_TypeMismatch::Raise
+ ("Shape for shell construction is neither a shell nor a face");
+ }
+ }
+ }
+
+ /**
+ * This function constructs a shell or a compound of shells
+ * from a set of faces and/or shells.
+ *
+ * @param theShapes is a set of faces, shells and/or
+ * compounds of faces/shells.
+ * @return a shell or a compound of shells.
+ */
+ TopoDS_Shape makeShellFromFaces
+ (const Handle(TColStd_HSequenceOfTransient) &theShapes)
+ {
+ const Standard_Integer aNbShapes = theShapes->Length();
+ Standard_Integer i;
+ TopTools_ListOfShape aListFaces;
+ TopTools_MapOfShape aMapFence;
+ BRep_Builder aBuilder;
+
+ // Fill the list of unique faces
+ for (i = 1; i <= aNbShapes; ++i) {
+ // Function
+ const Handle(GEOM_Function) aRefShape =
+ Handle(GEOM_Function)::DownCast(theShapes->Value(i));
+
+ if (aRefShape.IsNull()) {
+ Standard_NullObject::Raise("Face for shell construction is null");
+ }
+
+ // Shape
+ const TopoDS_Shape aShape = aRefShape->GetValue();
+
+ addFaces(aShape, aListFaces, aMapFence);
+ }
+
+ // Perform computation of shells.
+ TopTools_ListOfShape aListShells;
+ TopTools_ListIteratorOfListOfShape anIter;
+
+ while (!aListFaces.IsEmpty()) {
+ // Perform sewing
+ BRepBuilderAPI_Sewing aSewing(Precision::Confusion()*10.0);
+
+ for (anIter.Initialize(aListFaces); anIter.More(); anIter.Next()) {
+ aSewing.Add(anIter.Value());
+ }
+
+ aSewing.Perform();
+
+ // Fill list of shells.
+ const TopoDS_Shape &aSewed = aSewing.SewedShape();
+ TopExp_Explorer anExp(aSewed, TopAbs_SHELL);
+ Standard_Boolean isNewShells = Standard_False;
+
+ // Append shells
+ for (; anExp.More(); anExp.Next()) {
+ aListShells.Append(anExp.Current());
+ isNewShells = Standard_True;
+ }
+
+ // Append single faces.
+ anExp.Init(aSewed, TopAbs_FACE, TopAbs_SHELL);
+
+ for (; anExp.More(); anExp.Next()) {
+ TopoDS_Shell aShell;
+
+ aBuilder.MakeShell(aShell);
+ aBuilder.Add(aShell, anExp.Current());
+ aListShells.Append(aShell);
+ isNewShells = Standard_True;
+ }
+
+ if (!isNewShells) {
+ // There are no more shell can be obtained. Break the loop.
+ break;
+ }
+
+ // Remove faces that are in the result from the list.
+ TopTools_IndexedMapOfShape aMapFaces;
+
+ TopExp::MapShapes(aSewed, TopAbs_FACE, aMapFaces);
+
+ // Add deleted faces to the map
+ const Standard_Integer aNbDelFaces = aSewing.NbDeletedFaces();
+
+ for (i = 1; i <= aNbDelFaces; ++i) {
+ aMapFaces.Add(aSewing.DeletedFace(i));
+ }
+
+ for (anIter.Initialize(aListFaces); anIter.More();) {
+ const TopoDS_Shape &aFace = anIter.Value();
+ Standard_Boolean isFaceUsed = Standard_False;
+
+ if (aMapFaces.Contains(aFace) || aSewing.IsModified(aFace)) {
+ // Remove face from the list.
+ aListFaces.Remove(anIter);
+ } else {
+ // Go to the next face.
+ anIter.Next();
+ }
+ }
+ }
+
+ // If there are faces not used in shells create a shell for each face.
+ for (anIter.Initialize(aListFaces); anIter.More(); anIter.Next()) {
+ TopoDS_Shell aShell;
+
+ aBuilder.MakeShell(aShell);
+ aBuilder.Add(aShell, anIter.Value());
+ aListShells.Append(aShell);
+ }
+
+ // Construct the result that can be either a shell or a compound of shells
+ TopoDS_Shape aResult;
+
+ if (!aListShells.IsEmpty()) {
+ if (aListShells.Extent() == 1) {
+ aResult = aListShells.First();
+ } else {
+ // There are more then one shell.
+ TopoDS_Compound aCompound;
+
+ aBuilder.MakeCompound(aCompound);
+
+ for (anIter.Initialize(aListShells); anIter.More(); anIter.Next()) {
+ aBuilder.Add(aCompound, anIter.Value());
+ }
+
+ aResult = aCompound;
+ }
+ }
+
+ return aResult;
+ }
+
+ // End of namespace
+}
+
//modified by NIZNHY-PKV Wed Dec 28 13:48:20 2011f
//static
// void KeepEdgesOrder(const Handle(TopTools_HSequenceOfShape)& aEdges,
//function : Execute
//purpose :
//=======================================================================
-Standard_Integer GEOMImpl_ShapeDriver::Execute(TFunction_Logbook& log) const
+Standard_Integer GEOMImpl_ShapeDriver::Execute(Handle(TFunction_Logbook)& log) const
{
if (Label().IsNull()) return 0;
Handle(GEOM_Function) aFunction = GEOM_Function::GetFunction(Label());
TopoDS_Shape aShape;
TCollection_AsciiString aWarning;
+
+ // this is an exact type of expected shape, or shape in a compound if compound is allowed as a result (see below)
TopAbs_ShapeEnum anExpectedType = TopAbs_SHAPE;
+ // this should be true if result can be a compound of shapes of strict type (see above)
+ bool allowCompound = false;
BRep_Builder B;
if (aType == WIRE_EDGES) {
+ // result may be only a single wire
anExpectedType = TopAbs_WIRE;
Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
aShape = MakeWireFromEdges(aShapes, aTolerance);
}
else if (aType == FACE_WIRE) {
+ // result may be a face or a compound of faces
anExpectedType = TopAbs_FACE;
+ allowCompound = true;
Handle(GEOM_Function) aRefBase = aCI.GetBase();
TopoDS_Shape aShapeBase = aRefBase->GetValue();
Standard_NullObject::Raise
("Shape for face construction is not closed");
}
- else if (aShapeBase.ShapeType() == TopAbs_EDGE && aShapeBase.Closed()) {
+ else if (aShapeBase.ShapeType() == TopAbs_EDGE && BRep_Tool::IsClosed(aShapeBase)) {
BRepBuilderAPI_MakeWire MW;
MW.Add(TopoDS::Edge(aShapeBase));
if (!MW.IsDone()) {
}
}
else if (aType == FACE_WIRES) {
+ // result may be a face or a compound of faces
anExpectedType = TopAbs_FACE;
+ allowCompound = true;
// Try to build a face from a set of wires and edges
int ind;
// 1. Extract all edges from the given arguments
TopTools_MapOfShape aMapEdges;
Handle(TopTools_HSequenceOfShape) aSeqEdgesIn = new TopTools_HSequenceOfShape;
+ TColStd_IndexedDataMapOfTransientTransient aMapTShapes;
for (ind = 1; ind <= nbshapes; ind++) {
Handle(GEOM_Function) aRefSh_i = Handle(GEOM_Function)::DownCast(aShapes->Value(ind));
TopExp_Explorer anExpE_i (aSh_i, TopAbs_EDGE);
for (; anExpE_i.More(); anExpE_i.Next()) {
if (aMapEdges.Add(anExpE_i.Current())) {
- aSeqEdgesIn->Append(anExpE_i.Current());
+ // Copy the original shape.
+ TopoDS_Shape aShapeCopy;
+
+ TNaming_CopyShape::CopyTool
+ (anExpE_i.Current(), aMapTShapes, aShapeCopy);
+ aSeqEdgesIn->Append(aShapeCopy);
}
}
}
+ if (aSeqEdgesIn->IsEmpty()) {
+ Standard_ConstructionError::Raise("No edges given");
+ }
+
// 2. Connect edges to wires of maximum length
Handle(TopTools_HSequenceOfShape) aSeqWiresOut;
ShapeAnalysis_FreeBounds::ConnectEdgesToWires(aSeqEdgesIn, Precision::Confusion(),
aShape = C;
}
}
- else if (aType == SHELL_FACES) {
- anExpectedType = TopAbs_SHELL;
+ else if (aType == FACE_FROM_SURFACE) {
+ // result may be only a face
+ anExpectedType = TopAbs_FACE;
Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
- unsigned int ind, nbshapes = aShapes->Length();
-
- // add faces
- BRepBuilderAPI_Sewing aSewing (Precision::Confusion()*10.0);
- for (ind = 1; ind <= nbshapes; ind++) {
- Handle(GEOM_Function) aRefShape = Handle(GEOM_Function)::DownCast(aShapes->Value(ind));
- TopoDS_Shape aShape_i = aRefShape->GetValue();
- if (aShape_i.IsNull()) {
- Standard_NullObject::Raise("Face for shell construction is null");
- }
- aSewing.Add(aShape_i);
- }
-
- aSewing.Perform();
-
- TopoDS_Shape sh = aSewing.SewedShape();
-
- if (sh.ShapeType()==TopAbs_FACE && nbshapes==1) {
- // case for creation of shell from one face - PAL12722 (skl 26.06.2006)
- TopoDS_Shell ss;
- B.MakeShell(ss);
- B.Add(ss,sh);
- aShape = ss;
- }
- else {
- //TopExp_Explorer exp (aSewing.SewedShape(), TopAbs_SHELL);
- TopExp_Explorer exp (sh, TopAbs_SHELL);
- Standard_Integer ish = 0;
- for (; exp.More(); exp.Next()) {
- aShape = exp.Current();
- ish++;
- }
-
- if (ish != 1) {
- // try the case of one face (Mantis issue 0021809)
- TopExp_Explorer expF (sh, TopAbs_FACE);
- Standard_Integer ifa = 0;
- for (; expF.More(); expF.Next()) {
- aShape = expF.Current();
- ifa++;
- }
- if (ifa == 1) {
- TopoDS_Shell ss;
- B.MakeShell(ss);
- B.Add(ss,aShape);
- aShape = ss;
- }
- else {
- aShape = aSewing.SewedShape();
+ if (aShapes.IsNull() == Standard_False) {
+ Standard_Integer aNbShapes = aShapes->Length();
+
+ if (aNbShapes == 2) {
+ Handle(GEOM_Function) aRefFace =
+ Handle(GEOM_Function)::DownCast(aShapes->Value(1));
+ Handle(GEOM_Function) aRefWire =
+ Handle(GEOM_Function)::DownCast(aShapes->Value(2));
+
+ if (aRefFace.IsNull() == Standard_False &&
+ aRefWire.IsNull() == Standard_False) {
+ TopoDS_Shape aShFace = aRefFace->GetValue();
+ TopoDS_Shape aShWire = aRefWire->GetValue();
+
+ if (aShFace.IsNull() == Standard_False &&
+ aShFace.ShapeType() == TopAbs_FACE &&
+ aShWire.IsNull() == Standard_False &&
+ aShWire.ShapeType() == TopAbs_WIRE) {
+ TopoDS_Face aFace = TopoDS::Face(aShFace);
+ TopoDS_Wire aWire = TopoDS::Wire(aShWire);
+ Handle(Geom_Surface) aSurf = BRep_Tool::Surface(aFace);
+ BRepBuilderAPI_MakeFace aMkFace(aSurf, aWire);
+
+ if (aMkFace.IsDone()) {
+ aShape = aMkFace.Shape();
+ }
+ }
}
}
}
-
}
- else if (aType == SOLID_SHELL) {
- anExpectedType = TopAbs_SOLID;
-
- Handle(GEOM_Function) aRefShell = aCI.GetBase();
- TopoDS_Shape aShapeShell = aRefShell->GetValue();
- if (!aShapeShell.IsNull() && aShapeShell.ShapeType() == TopAbs_COMPOUND) {
- TopoDS_Iterator It (aShapeShell, Standard_True, Standard_True);
- if (It.More()) aShapeShell = It.Value();
- }
- if (aShapeShell.IsNull() || aShapeShell.ShapeType() != TopAbs_SHELL) {
- Standard_NullObject::Raise("Shape for solid construction is null or not a shell");
- }
+ else if (aType == SHELL_FACES) {
+ // result may be only a shell or a compound of shells
+ anExpectedType = TopAbs_SHELL;
+ allowCompound = true;
- BRepCheck_Shell chkShell(TopoDS::Shell(aShapeShell));
- if (chkShell.Closed() == BRepCheck_NotClosed) return 0;
+ Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
- TopoDS_Solid Sol;
- B.MakeSolid(Sol);
- B.Add(Sol, aShapeShell);
- BRepClass3d_SolidClassifier SC (Sol);
- SC.PerformInfinitePoint(Precision::Confusion());
- if (SC.State() == TopAbs_IN) {
- B.MakeSolid(Sol);
- B.Add(Sol, aShapeShell.Reversed());
+ if (aShapes.IsNull()) {
+ Standard_NullObject::Raise("Argument Shapes is null");
}
- aShape = Sol;
-
+ // Compute a shell or a compound of shells.
+ aShape = makeShellFromFaces(aShapes);
}
else if (aType == SOLID_SHELLS) {
+ // result may be only a solid or a compound of solids
anExpectedType = TopAbs_SOLID;
+ allowCompound = true;
Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
unsigned int ind, nbshapes = aShapes->Length();
}
if (aShapeShell.ShapeType() == TopAbs_COMPOUND) {
TopoDS_Iterator It (aShapeShell, Standard_True, Standard_True);
- if (It.More()) aShapeShell = It.Value();
+ for (; It.More(); It.Next()) {
+ TopoDS_Shape aSubShape = It.Value();
+ if (aSubShape.ShapeType() == TopAbs_SHELL) {
+ aMkSolid.Add(TopoDS::Shell(aSubShape));
+ ish++;
+ }
+ else
+ Standard_TypeMismatch::Raise
+ ("Shape for solid construction is neither a shell nor a compound of shells");
+ }
}
- if (aShapeShell.ShapeType() == TopAbs_SHELL) {
+ else if (aShapeShell.ShapeType() == TopAbs_SHELL) {
aMkSolid.Add(TopoDS::Shell(aShapeShell));
ish++;
}
aShape = Sol;
}
else if (aType == COMPOUND_SHAPES) {
- anExpectedType = TopAbs_COMPOUND;
+ // result may be only a compound of any shapes
+ allowCompound = true;
Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
unsigned int ind, nbshapes = aShapes->Length();
aShape = C;
}
- /*
- else if (aType == REVERSE_ORIENTATION) {
- Handle(GEOM_Function) aRefShape = aCI.GetBase();
- TopoDS_Shape aShape_i = aRefShape->GetValue();
- if (aShape_i.IsNull()) {
- Standard_NullObject::Raise("Shape for reverse is null");
- }
-
- BRepBuilderAPI_Copy Copy(aShape_i);
- if( Copy.IsDone() ) {
- TopoDS_Shape tds = Copy.Shape();
- if( tds.IsNull() ) {
- Standard_ConstructionError::Raise("Orientation aborted : Can not reverse the shape");
- }
-
- if( tds.Orientation() == TopAbs_FORWARD)
- tds.Orientation(TopAbs_REVERSED);
- else
- tds.Orientation(TopAbs_FORWARD);
-
- aShape = tds;
- }
- }
- */
else if (aType == EDGE_WIRE) {
+ // result may be only an edge
anExpectedType = TopAbs_EDGE;
Handle(GEOM_Function) aRefBase = aCI.GetBase();
aShape = MakeEdgeFromWire(aWire, LinTol, AngTol);
}
+ else if (aType == SOLID_FACES) {
+ // result may be only a solid or a compound of solids
+ anExpectedType = TopAbs_SOLID;
+ allowCompound = true;
+
+ Handle(TColStd_HSequenceOfTransient) aShapes = aCI.GetShapes();
+ unsigned int ind, nbshapes = aShapes->Length();
+
+ // add faces
+ TopTools_ListOfShape aLS;
+ for (ind = 1; ind <= nbshapes; ind++) {
+ Handle(GEOM_Function) aRefShape = Handle(GEOM_Function)::DownCast(aShapes->Value(ind));
+ TopoDS_Shape aShape_i = aRefShape->GetValue();
+ if (aShape_i.IsNull()) {
+ Standard_NullObject::Raise("Shape for solid construction is null");
+ }
+ if (aShape_i.ShapeType() == TopAbs_COMPOUND) {
+ TopoDS_Iterator It (aShape_i, Standard_True, Standard_True);
+ for (; It.More(); It.Next()) {
+ TopoDS_Shape aSubShape = It.Value();
+ if (aSubShape.ShapeType() == TopAbs_FACE || aSubShape.ShapeType() == TopAbs_SHELL)
+ aLS.Append(aSubShape);
+ else
+ Standard_TypeMismatch::Raise
+ ("Shape for solid construction is neither a list of faces and/or shells "
+ "nor a compound of faces and/or shells");
+ }
+ }
+ aLS.Append(aShape_i);
+ }
+
+ BOPAlgo_MakerVolume aMV;
+ aMV.SetArguments(aLS);
+ aMV.SetIntersect(aCI.GetIsIntersect());
+ aMV.Perform();
+ if (aMV.HasErrors()) return 0;
+
+ aShape = aMV.Shape();
+ }
else if (aType == EDGE_CURVE_LENGTH) {
+ // result may be only an edge
anExpectedType = TopAbs_EDGE;
GEOMImpl_IVector aVI (aFunction);
BRepBuilderAPI_MakeEdge aME (ReOrientedCurve, UFirst, aParam);
if (aME.IsDone())
aShape = aME.Shape();
- } else if (aType == SHAPE_ISOLINE) {
+ }
+ else if (aType == SHAPE_ISOLINE) {
+ // result may be only an edge or compound of edges
+ anExpectedType = TopAbs_EDGE;
+ allowCompound = true;
+
GEOMImpl_IIsoline aII (aFunction);
Handle(GEOM_Function) aRefFace = aII.GetFace();
TopoDS_Shape aShapeFace = aRefFace->GetValue();
("Shape for isoline construction is not a face");
}
}
+ else if (aType == EDGE_UV) {
+ // result may be only an edge
+ anExpectedType = TopAbs_EDGE;
+
+ GEOMImpl_IShapeExtend aSE (aFunction);
+ Handle(GEOM_Function) aRefEdge = aSE.GetShape();
+ TopoDS_Shape aShapeEdge = aRefEdge->GetValue();
+
+ if (aShapeEdge.ShapeType() == TopAbs_EDGE) {
+ TopoDS_Edge anEdge = TopoDS::Edge(aShapeEdge);
+
+ aShape = ExtendEdge(anEdge, aSE.GetUMin(), aSE.GetUMax());
+ }
+ }
+ else if (aType == FACE_UV) {
+ // result may be only a face
+ anExpectedType = TopAbs_FACE;
+
+ GEOMImpl_IShapeExtend aSE (aFunction);
+ Handle(GEOM_Function) aRefFace = aSE.GetShape();
+ TopoDS_Shape aShapeFace = aRefFace->GetValue();
+
+ if (aShapeFace.ShapeType() == TopAbs_FACE) {
+ TopoDS_Face aFace = TopoDS::Face(aShapeFace);
+
+ aFace.Orientation(TopAbs_FORWARD);
+ aShape = ExtendFace(aFace, aSE.GetUMin(), aSE.GetUMax(),
+ aSE.GetVMin(), aSE.GetVMax());
+ }
+ }
+ else if (aType == SURFACE_FROM_FACE) {
+ // result may be only a face
+ anExpectedType = TopAbs_FACE;
+
+ GEOMImpl_IShapeExtend aSE (aFunction);
+ Handle(GEOM_Function) aRefFace = aSE.GetShape();
+ TopoDS_Shape aShapeFace = aRefFace->GetValue();
+
+ if (aShapeFace.ShapeType() == TopAbs_FACE) {
+ TopoDS_Face aFace = TopoDS::Face(aShapeFace);
+ Handle(Geom_Surface) aSurface = BRep_Tool::Surface(aFace);
+
+ if (aSurface.IsNull() == Standard_False) {
+ Handle(Standard_Type) aType = aSurface->DynamicType();
+ Standard_Real aU1;
+ Standard_Real aU2;
+ Standard_Real aV1;
+ Standard_Real aV2;
+
+ // Get U, V bounds of the face.
+ aFace.Orientation(TopAbs_FORWARD);
+ ShapeAnalysis::GetFaceUVBounds(aFace, aU1, aU2, aV1, aV2);
+
+ // Get the surface of original type
+ while (aType == STANDARD_TYPE(Geom_RectangularTrimmedSurface)) {
+ Handle(Geom_RectangularTrimmedSurface) aTrSurface =
+ Handle(Geom_RectangularTrimmedSurface)::DownCast(aSurface);
+
+ aSurface = aTrSurface->BasisSurface();
+ aType = aSurface->DynamicType();
+ }
+
+ const Standard_Real aTol = BRep_Tool::Tolerance(aFace);
+ BRepBuilderAPI_MakeFace aMF(aSurface, aU1, aU2, aV1, aV2, aTol);
+
+ if (aMF.IsDone()) {
+ aShape = aMF.Shape();
+ }
+ }
+ }
+ } else if (aType == EXTRACTION) {
+ allowCompound = true;
+
+ GEOMImpl_IExtract aCI(aFunction);
+ Handle(GEOM_Function) aRefShape = aCI.GetShape();
+ TopoDS_Shape aShapeBase = aRefShape->GetValue();
+
+ if (aShapeBase.IsNull()) {
+ Standard_NullObject::Raise("Argument Shape is null");
+ return 0;
+ }
+
+ Handle(TColStd_HArray1OfInteger) anIDs = aCI.GetSubShapeIDs();
+ TopTools_ListOfShape aListSubShapes;
+ TopTools_IndexedMapOfShape anIndices;
+ int i;
+
+ TopExp::MapShapes(aShapeBase, anIndices);
+
+ if (!anIDs.IsNull()) {
+ const int anUpperID = anIDs->Upper();
+ const int aNbShapes = anIndices.Extent();
+
+ for (i = anIDs->Lower(); i <= anUpperID; ++i) {
+ const Standard_Integer anIndex = anIDs->Value(i);
+
+ if (anIndex < 1 || anIndex > aNbShapes) {
+ TCollection_AsciiString aMsg(" Invalid index: ");
+
+ aMsg += TCollection_AsciiString(anIndex);
+ StdFail_NotDone::Raise(aMsg.ToCString());
+ return 0;
+ }
+
+ const TopoDS_Shape &aSubShape = anIndices.FindKey(anIndex);
+
+ aListSubShapes.Append(aSubShape);
+ }
+ }
+
+ // Compute extraction.
+ GEOMAlgo_Extractor anExtractor;
+
+ anExtractor.SetShape(aShapeBase);
+ anExtractor.SetShapesToRemove(aListSubShapes);
+
+ anExtractor.Perform();
+
+ // Interpret results
+ Standard_Integer iErr = anExtractor.ErrorStatus();
+
+ // The detailed description of error codes is in GEOMAlgo_Extractor.cxx
+ if (iErr) {
+ TCollection_AsciiString aMsg(" iErr : ");
+
+ aMsg += TCollection_AsciiString(iErr);
+ StdFail_NotDone::Raise(aMsg.ToCString());
+ return 0;
+ }
+
+ aShape = anExtractor.GetResult();
+
+ if (aShape.IsNull()) {
+ Standard_ConstructionError::Raise("Result of extraction is empty");
+ }
+
+ // Get statistics.
+ const TopTools_ListOfShape &aRemoved = anExtractor.GetRemoved();
+ const TopTools_ListOfShape &aModified = anExtractor.GetModified();
+ const TopTools_ListOfShape &aNew = anExtractor.GetNew();
+ Handle(TColStd_HArray1OfInteger) aRemovedIDs =
+ GetShapeIDs(aRemoved, anIndices);
+ Handle(TColStd_HArray1OfInteger) aModifiedIDs =
+ GetShapeIDs(aModified, anIndices);
+ Handle(TColStd_HArray1OfInteger) aNewIDs;
+
+ if (!aShape.IsNull()) {
+ // Get newly created sub-shapes
+ TopTools_IndexedMapOfShape aNewIndices;
+
+ TopExp::MapShapes(aShape, aNewIndices);
+ aNewIDs = GetShapeIDs(aNew, aNewIndices);
+ }
+
+ if (!aRemovedIDs.IsNull()) {
+ aCI.SetRemovedIDs(aRemovedIDs);
+ }
+
+ if (!aModifiedIDs.IsNull()) {
+ aCI.SetModifiedIDs(aModifiedIDs);
+ }
+
+ if (!aNewIDs.IsNull()) {
+ aCI.SetAddedIDs(aNewIDs);
+ }
+ }
else {
}
if (aShape.IsNull()) return 0;
// Check shape validity
- BRepCheck_Analyzer ana (aShape, false);
+ BRepCheck_Analyzer ana (aShape, true);
if (!ana.IsValid()) {
//Standard_ConstructionError::Raise("Algorithm have produced an invalid shape result");
// For Mantis issue 0021772: EDF 2336 GEOM: Non valid face created from two circles
aShape = aSfs->Shape();
}
- // Check if the result shape type is compatible with the expected.
+ // Check if the result shape is of expected type.
const TopAbs_ShapeEnum aShType = aShape.ShapeType();
- if (anExpectedType != TopAbs_SHAPE && anExpectedType != aShType) {
- Standard_ConstructionError::Raise("Result type check failed");
+ bool ok = false;
+ if ( aShType == TopAbs_COMPOUND || aShType == TopAbs_COMPSOLID ) {
+ ok = allowCompound && checkCompound( aShape, anExpectedType );
+ }
+ else {
+ ok = ( anExpectedType == TopAbs_SHAPE ) || ( aShType == anExpectedType );
}
+ if (!ok)
+ Standard_ConstructionError::Raise("Result type check failed");
aFunction->SetValue(aShape);
- log.SetTouched(Label());
+ log->SetTouched(Label());
if (!aWarning.IsEmpty())
Standard_Failure::Raise(aWarning.ToCString());
TColStd_SequenceOfReal TolSeq;
GeomAbs_CurveType CurType;
TopoDS_Vertex FirstVertex, LastVertex;
+ Standard_Real aPntShiftDist = 0.;
BRepTools_WireExplorer wexp(theWire) ;
for (; wexp.More(); wexp.Next())
{
Standard_Boolean Done = Standard_False;
Standard_Real NewFpar, NewLpar;
- GeomAdaptor_Curve GAprevcurve(CurveSeq.Last());
+ Handle(Geom_Geometry) aTrsfGeom = CurveSeq.Last()->Transformed
+ (LocSeq.Last().Location().Transformation());
+ GeomAdaptor_Curve GAprevcurve(Handle(Geom_Curve)::DownCast(aTrsfGeom));
TopoDS_Vertex CurVertex = wexp.CurrentVertex();
TopoDS_Vertex CurFirstVer = TopExp::FirstVertex(anEdge);
TopAbs_Orientation ConnectByOrigin = (CurVertex.IsSame(CurFirstVer))? TopAbs_FORWARD : TopAbs_REVERSED;
- if (aCurve == CurveSeq.Last())
+ if (aCurve == CurveSeq.Last() && aLoc.IsEqual(LocSeq.Last().Location()))
{
NewFpar = fpar;
NewLpar = lpar;
gp_Pnt P2 = ElCLib::Value(lpar, aLine);
NewFpar = ElCLib::Parameter(PrevLine, P1);
NewLpar = ElCLib::Parameter(PrevLine, P2);
+
+ // Compute shift
+ if (ConnectByOrigin == TopAbs_FORWARD) {
+ gp_Pnt aNewP2 = ElCLib::Value(NewLpar, PrevLine);
+
+ aPntShiftDist += P2.Distance(aNewP2);
+ } else {
+ gp_Pnt aNewP1 = ElCLib::Value(NewFpar, PrevLine);
+
+ aPntShiftDist += P1.Distance(aNewP1);
+ }
+
if (NewLpar < NewFpar)
{
Standard_Real MemNewFpar = NewFpar;
Abs(aCircle.Radius() - PrevCircle.Radius()) <= LinTol &&
aCircle.Axis().IsParallel(PrevCircle.Axis(), AngTol))
{
+ const Standard_Boolean isFwd = ConnectByOrigin == TopAbs_FORWARD;
+
if (aCircle.Axis().Direction() * PrevCircle.Axis().Direction() < 0.)
{
Standard_Real memfpar = fpar;
gp_Pnt P2 = ElCLib::Value(lpar, aCircle);
NewFpar = ElCLib::Parameter(PrevCircle, P1);
NewLpar = ElCLib::Parameter(PrevCircle, P2);
+
+ // Compute shift
+ if (isFwd) {
+ gp_Pnt aNewP2 = ElCLib::Value(NewLpar, PrevCircle);
+
+ aPntShiftDist += P2.Distance(aNewP2);
+ } else {
+ gp_Pnt aNewP1 = ElCLib::Value(NewFpar, PrevCircle);
+
+ aPntShiftDist += P1.Distance(aNewP1);
+ }
+
if (NewLpar < NewFpar)
NewLpar += 2.*M_PI;
//Standard_Real MemNewFpar = NewFpar, MemNewLpar = NewLpar;
Abs(anEllipse.MinorRadius() - PrevEllipse.MinorRadius()) <= LinTol &&
anEllipse.Axis().IsParallel(PrevEllipse.Axis(), AngTol))
{
+ const Standard_Boolean isFwd = ConnectByOrigin == TopAbs_FORWARD;
+
if (anEllipse.Axis().Direction() * PrevEllipse.Axis().Direction() < 0.)
{
Standard_Real memfpar = fpar;
gp_Pnt P2 = ElCLib::Value(lpar, anEllipse);
NewFpar = ElCLib::Parameter(PrevEllipse, P1);
NewLpar = ElCLib::Parameter(PrevEllipse, P2);
+
+ // Compute shift
+ if (isFwd) {
+ gp_Pnt aNewP2 = ElCLib::Value(NewLpar, PrevEllipse);
+
+ aPntShiftDist += P2.Distance(aNewP2);
+ } else {
+ gp_Pnt aNewP1 = ElCLib::Value(NewFpar, PrevEllipse);
+
+ aPntShiftDist += P1.Distance(aNewP1);
+ }
+
if (NewLpar < NewFpar)
NewLpar += 2.*M_PI;
if (ConnectByOrigin == TopAbs_FORWARD)
gp_Pnt P2 = ElCLib::Value(lpar, aHypr);
NewFpar = ElCLib::Parameter(PrevHypr, P1);
NewLpar = ElCLib::Parameter(PrevHypr, P2);
+
+ // Compute shift
+ if (ConnectByOrigin == TopAbs_FORWARD) {
+ gp_Pnt aNewP2 = ElCLib::Value(NewLpar, PrevHypr);
+
+ aPntShiftDist += P2.Distance(aNewP2);
+ } else {
+ gp_Pnt aNewP1 = ElCLib::Value(NewFpar, PrevHypr);
+
+ aPntShiftDist += P1.Distance(aNewP1);
+ }
+
if (NewLpar < NewFpar)
{
Standard_Real MemNewFpar = NewFpar;
gp_Pnt P2 = ElCLib::Value(lpar, aParab);
NewFpar = ElCLib::Parameter(PrevParab, P1);
NewLpar = ElCLib::Parameter(PrevParab, P2);
+
+ // Compute shift
+ if (ConnectByOrigin == TopAbs_FORWARD) {
+ gp_Pnt aNewP2 = ElCLib::Value(NewLpar, PrevParab);
+
+ aPntShiftDist += P2.Distance(aNewP2);
+ } else {
+ gp_Pnt aNewP1 = ElCLib::Value(NewFpar, PrevParab);
+
+ aPntShiftDist += P1.Distance(aNewP1);
+ }
+
if (NewLpar < NewFpar)
{
Standard_Real MemNewFpar = NewFpar;
LocSeq.Append(aLocShape);
FparSeq.Append(fpar);
LparSeq.Append(lpar);
- TolSeq.Append(BRep_Tool::Tolerance(CurVertex));
+ TolSeq.Append(aPntShiftDist + BRep_Tool::Tolerance(CurVertex));
+ aPntShiftDist = 0.;
CurType = aType;
}
} // end of else (CurveSeq.IsEmpty()) -> not first time
} // end for (; wexp.More(); wexp.Next())
LastVertex = wexp.CurrentVertex();
- TolSeq.Append(BRep_Tool::Tolerance(LastVertex));
+ TolSeq.Append(aPntShiftDist + BRep_Tool::Tolerance(LastVertex));
FirstVertex.Orientation(TopAbs_FORWARD);
LastVertex.Orientation(TopAbs_REVERSED);
if (closed_flag) {
// Check if closed curve is reordered.
- Handle(Geom_Curve) aCurve = concatcurve->Value(concatcurve->Lower());
+ Handle(Geom_BSplineCurve) aCurve = concatcurve->Value(concatcurve->Lower());
Standard_Real aFPar = aCurve->FirstParameter();
gp_Pnt aPFirst;
gp_Pnt aPntVtx = BRep_Tool::Pnt(FirstVertex);
const Standard_Real aTol = BRep_Tool::Tolerance(aVtx);
if (aPFirst.IsEqual(aPnt, aTol)) {
- // The coinsident vertex is found.
+ // The coincident vertex is found.
FirstVertex = aVtx;
LastVertex = aVtx;
FirstVertex.Orientation(TopAbs_FORWARD);
return aResult;
}
+//=============================================================================
+/*!
+ * \brief Returns an extended edge.
+ */
+//=============================================================================
+
+TopoDS_Shape GEOMImpl_ShapeDriver::ExtendEdge
+ (const TopoDS_Edge &theEdge,
+ const Standard_Real theMin,
+ const Standard_Real theMax) const
+{
+ TopoDS_Shape aResult;
+ Standard_Real aF;
+ Standard_Real aL;
+ Handle(Geom_Curve) aCurve = BRep_Tool::Curve(theEdge, aF, aL);
+ const Standard_Real aTol = BRep_Tool::Tolerance(theEdge);
+ Standard_Real aRange2d = aL - aF;
+
+ if (aCurve.IsNull() == Standard_False && aRange2d > aTol) {
+ Standard_Real aMin = aF + aRange2d*theMin;
+ Standard_Real aMax = aF + aRange2d*theMax;
+
+ Handle(Standard_Type) aType = aCurve->DynamicType();
+
+ // Get the curve of original type
+ while (aType == STANDARD_TYPE(Geom_TrimmedCurve)) {
+ Handle(Geom_TrimmedCurve) aTrCurve =
+ Handle(Geom_TrimmedCurve)::DownCast(aCurve);
+
+ aCurve = aTrCurve->BasisCurve();
+ aType = aCurve->DynamicType();
+ }
+
+ if (aCurve->IsPeriodic()) {
+ // The curve is periodic. Check if a new range is less then a period.
+ if (aMax - aMin > aCurve->Period()) {
+ aMax = aMin + aCurve->Period();
+ }
+ } else {
+ // The curve is not periodic. Check if aMin and aMax within bounds.
+ aMin = Max(aMin, aCurve->FirstParameter());
+ aMax = Min(aMax, aCurve->LastParameter());
+ }
+
+ if (aMax - aMin > aTol) {
+ // Create a new edge.
+ BRepBuilderAPI_MakeEdge aME (aCurve, aMin, aMax);
+
+ if (aME.IsDone()) {
+ aResult = aME.Shape();
+ }
+ }
+ }
+
+ return aResult;
+}
+
+//=============================================================================
+/*!
+ * \brief Returns an extended face.
+ */
+//=============================================================================
+
+TopoDS_Shape GEOMImpl_ShapeDriver::ExtendFace
+ (const TopoDS_Face &theFace,
+ const Standard_Real theUMin,
+ const Standard_Real theUMax,
+ const Standard_Real theVMin,
+ const Standard_Real theVMax) const
+{
+ TopoDS_Shape aResult;
+ Handle(Geom_Surface) aSurface = BRep_Tool::Surface(theFace);
+ const Standard_Real aTol = BRep_Tool::Tolerance(theFace);
+ Standard_Real aU1;
+ Standard_Real aU2;
+ Standard_Real aV1;
+ Standard_Real aV2;
+
+ // Get U, V bounds of the face.
+ ShapeAnalysis::GetFaceUVBounds(theFace, aU1, aU2, aV1, aV2);
+
+ const Standard_Real aURange = aU2 - aU1;
+ const Standard_Real aVRange = aV2 - aV1;
+
+ if (aSurface.IsNull() == Standard_False &&
+ aURange > aTol && aURange > aTol) {
+ Handle(Standard_Type) aType = aSurface->DynamicType();
+
+ // Get the surface of original type
+ while (aType == STANDARD_TYPE(Geom_RectangularTrimmedSurface)) {
+ Handle(Geom_RectangularTrimmedSurface) aTrSurface =
+ Handle(Geom_RectangularTrimmedSurface)::DownCast(aSurface);
+
+ aSurface = aTrSurface->BasisSurface();
+ aType = aSurface->DynamicType();
+ }
+
+ Standard_Real aUMin = aU1 + aURange*theUMin;
+ Standard_Real aUMax = aU1 + aURange*theUMax;
+ Standard_Real aVMin = aV1 + aVRange*theVMin;
+ Standard_Real aVMax = aV1 + aVRange*theVMax;
+
+ aSurface->Bounds(aU1, aU2, aV1, aV2);
+
+ if (aSurface->IsUPeriodic()) {
+ // The surface is U-periodic. Check if a new U range is less
+ // then a period.
+ if (aUMax - aUMin > aSurface->UPeriod()) {
+ aUMax = aUMin + aSurface->UPeriod();
+ }
+ } else {
+ // The surface is not V-periodic. Check if aUMin and aUMax
+ // within bounds.
+ aUMin = Max(aUMin, aU1);
+ aUMax = Min(aUMax, aU2);
+ }
+
+ if (aSurface->IsVPeriodic()) {
+ // The surface is V-periodic. Check if a new V range is less
+ // then a period.
+ if (aVMax - aVMin > aSurface->VPeriod()) {
+ aVMax = aVMin + aSurface->VPeriod();
+ }
+ } else {
+ // The surface is not V-periodic. Check if aVMin and aVMax
+ // within bounds.
+ aVMin = Max(aVMin, aV1);
+ aVMax = Min(aVMax, aV2);
+ }
+
+ if (aUMax - aUMin > aTol && aVMax - aVMin > aTol) {
+ // Create a new edge.
+ BRepBuilderAPI_MakeFace aMF
+ (aSurface, aUMin, aUMax, aVMin, aVMax, aTol);
+
+ if (aMF.IsDone()) {
+ aResult = aMF.Shape();
+ }
+ }
+ }
+
+ return aResult;
+}
+
//================================================================================
/*!
* \brief Returns a name of creation operation and names and values of creation parameters
AddParam( theParams, "Wires/edges", aCI.GetShapes() );
AddParam( theParams, "Is planar wanted", aCI.GetIsPlanar() );
break;
+ case FACE_FROM_SURFACE:
+ {
+ theOperationName = "FACE";
+
+ Handle(TColStd_HSequenceOfTransient) shapes = aCI.GetShapes();
+
+ if (shapes.IsNull() == Standard_False) {
+ Standard_Integer aNbShapes = shapes->Length();
+
+ if (aNbShapes > 0) {
+ AddParam(theParams, "Face", shapes->Value(1));
+
+ if (aNbShapes > 1) {
+ AddParam(theParams, "Wire", shapes->Value(2));
+ }
+ }
+ }
+ break;
+ }
case SHELL_FACES:
theOperationName = "SHELL";
AddParam( theParams, "Objects", aCI.GetShapes() );
break;
- case SOLID_SHELL:
case SOLID_SHELLS:
theOperationName = "SOLID";
AddParam( theParams, "Objects", aCI.GetShapes() );
break;
+ case SOLID_FACES:
+ theOperationName = "SOLID_FROM_FACES";
+ AddParam( theParams, "Objects", aCI.GetShapes() );
+ AddParam( theParams, "Is intersect", aCI.GetIsIntersect() );
+ break;
case COMPOUND_SHAPES:
theOperationName = "COMPOUND";
AddParam( theParams, "Objects", aCI.GetShapes() );
if ( !shapes.IsNull() && shapes->Length() > 1 )
AddParam( theParams, "Shape", shapes->Value(2) );
AddParam( theParams, "Shape type", TopAbs_ShapeEnum( aCI.GetSubShapeType() ));
- AddParam( theParams, "State", TopAbs_State((int) aCI.GetTolerance() ));
+ AddParam( theParams, "State" );
+ GEOMAlgo_State st = GEOMAlgo_State( (int) ( aCI.GetTolerance()+0.1 ) );
+ const char* stName[] = { "UNKNOWN","IN","OUT","ON","ONIN","ONOUT","INOUT" };
+ if ( 0 <= st && st <= GEOMAlgo_ST_INOUT )
+ theParams.back() << stName[ st ];
+ else
+ theParams.back() << (int) st;
break;
}
case SHAPE_ISOLINE:
AddParam(theParams, "Parameter", aII.GetParameter());
break;
}
+ case EDGE_UV:
+ {
+ GEOMImpl_IShapeExtend aSE (function);
+
+ theOperationName = "EDGE_EXTEND";
+ AddParam(theParams, "Edge", aSE.GetShape());
+ AddParam(theParams, "Min", aSE.GetUMin());
+ AddParam(theParams, "Max", aSE.GetUMax());
+ break;
+ }
+ case FACE_UV:
+ {
+ GEOMImpl_IShapeExtend aSE (function);
+
+ theOperationName = "FACE_EXTEND";
+ AddParam(theParams, "Face", aSE.GetShape());
+ AddParam(theParams, "UMin", aSE.GetUMin());
+ AddParam(theParams, "UMax", aSE.GetUMax());
+ AddParam(theParams, "VMin", aSE.GetVMin());
+ AddParam(theParams, "VMax", aSE.GetVMax());
+ break;
+ }
+ case SURFACE_FROM_FACE:
+ {
+ GEOMImpl_IShapeExtend aSE (function);
+
+ theOperationName = "SURFACE_FROM_FACE";
+ AddParam(theParams, "Face", aSE.GetShape());
+ break;
+ }
+ case EXTRACTION:
+ {
+ GEOMImpl_IExtract aCI (function);
+
+ theOperationName = "EXTRACTION";
+ AddParam(theParams, "Main Shape", aCI.GetShape());
+ AddParam(theParams, "Sub-shape IDs", aCI.GetSubShapeIDs());
+ break;
+ }
default:
return false;
}
return true;
}
-IMPLEMENT_STANDARD_HANDLE (GEOMImpl_ShapeDriver,GEOM_BaseDriver);
IMPLEMENT_STANDARD_RTTIEXT (GEOMImpl_ShapeDriver,GEOM_BaseDriver);
//modified by NIZNHY-PKV Wed Dec 28 13:48:31 2011f
