Remove unnecessary includes

[modules/geom.git] / src / GEOMImpl / GEOMImpl_ITransformOperations.cxx

diff --git a/src/GEOMImpl/GEOMImpl_ITransformOperations.cxx b/src/GEOMImpl/GEOMImpl_ITransformOperations.cxx
index 89c1d2b9c83cd6e0edcc0372a842c4489befc6dc..9956c826b9d0fa2724b634945302dd1e72a47635 100644 (file)
--- a/src/GEOMImpl/GEOMImpl_ITransformOperations.cxx
+++ b/src/GEOMImpl/GEOMImpl_ITransformOperations.cxx
@@ -1,4 +1,4 @@
-// Copyright (C) 2007-2014  CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2021  CEA/DEN, EDF R&D, OPEN CASCADE
 //
 // Copyright (C) 2003-2007  OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
 // CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
@@ -35,6 +35,7 @@
 #include <GEOMImpl_ITranslate.hxx>
 #include <GEOMImpl_IMirror.hxx>
 #include <GEOMImpl_IProjection.hxx>
+#include <GEOMImpl_IProjOnCyl.hxx>
 #include <GEOMImpl_IOffset.hxx>
 #include <GEOMImpl_IScale.hxx>
 #include <GEOMImpl_IRotate.hxx>
@@ -45,15 +46,11 @@
 #include <GEOM_Function.hxx>
 #include <GEOM_PythonDump.hxx>
 
-#include <Basics_OCCTVersion.hxx>
-
 #include "utilities.h"
-#include <OpUtil.hxx>
 #include <Utils_ExceptHandlers.hxx>
 
 #include <TFunction_DriverTable.hxx>
 #include <TFunction_Driver.hxx>
-#include <TFunction_Logbook.hxx>
 #include <TDF_Tool.hxx>
 
 #include <BRep_Tool.hxx>
@@ -77,8 +74,8 @@
  */
 //=============================================================================
 
-GEOMImpl_ITransformOperations::GEOMImpl_ITransformOperations (GEOM_Engine* theEngine, int theDocID)
-: GEOM_IOperations(theEngine, theDocID)
+GEOMImpl_ITransformOperations::GEOMImpl_ITransformOperations (GEOM_Engine* theEngine)
+: GEOM_IOperations(theEngine)
 {
   MESSAGE("GEOMImpl_ITransformOperations::GEOMImpl_ITransformOperations");
 }
@@ -129,17 +126,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TranslateTwoPoints
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Translation driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -182,17 +176,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TranslateDXDYDZ
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Translation driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -221,7 +212,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TranslateTwoPointsCopy
   if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   //Add a translate function
   Handle(GEOM_Function) aFunction =
@@ -238,17 +229,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TranslateTwoPointsCopy
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Translation driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -276,7 +264,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TranslateDXDYDZCopy
   if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   //Add a translate function
   Handle(GEOM_Function) aFunction =
@@ -293,17 +281,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TranslateDXDYDZCopy
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Translation driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -348,17 +333,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TranslateVector
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Translation driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -385,7 +367,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TranslateVectorCopy
   if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   //Add a translate function
   Handle(GEOM_Function) aFunction =
@@ -401,17 +383,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TranslateVectorCopy
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Translation driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -443,7 +422,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TranslateVectorDistance
 
   //Add a translate function
   if (theCopy) {
-    aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+    aCopy = GetEngine()->AddObject(theObject->GetType());
     aFunction = aCopy->AddFunction(GEOMImpl_TranslateDriver::GetID(), TRANSLATE_VECTOR_DISTANCE);
   }
   else {
@@ -462,17 +441,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TranslateVectorDistance
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Translation driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -507,7 +483,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Translate1D
   if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(theObject->GetType());
 
   //Add a translate function
   Handle(GEOM_Function) aFunction =
@@ -525,17 +501,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Translate1D
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Translation driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -568,7 +541,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Translate2D (Handle(GEOM_Obje
   if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(theObject->GetType());
 
   //Add a translate function
   Handle(GEOM_Function) aFunction =
@@ -590,17 +563,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Translate2D (Handle(GEOM_Obje
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Translation driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -788,17 +758,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::MirrorPlane
 
   //Compute the mirror
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Mirror driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -826,7 +793,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::MirrorPlaneCopy
   if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be mirrored
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   //Add a mirror function
   Handle(GEOM_Function) aFunction =
@@ -841,17 +808,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::MirrorPlaneCopy
 
   //Compute the mirror
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Mirror driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -895,17 +859,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::MirrorPoint
 
   //Compute the mirror
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Mirror driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -933,7 +894,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::MirrorPointCopy
   if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be mirrored
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   //Add a mirror function
   Handle(GEOM_Function) aFunction =
@@ -948,17 +909,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::MirrorPointCopy
 
   //Compute the mirror
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Mirror driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1002,17 +960,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::MirrorAxis
 
   //Compute the mirror
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Mirror driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1040,7 +995,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::MirrorAxisCopy
   if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be mirrored
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   //Add a mirror function
   Handle(GEOM_Function) aFunction =
@@ -1055,17 +1010,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::MirrorAxisCopy
 
   //Compute the mirror
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Mirror driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1083,8 +1035,10 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::MirrorAxisCopy
  *  OffsetShape
  */
 //=============================================================================
-Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShape
-                              (Handle(GEOM_Object) theObject, double theOffset)
+Handle(GEOM_Object)
+GEOMImpl_ITransformOperations::OffsetShape (Handle(GEOM_Object) theObject,
+                                            double              theOffset,
+                                            bool                theJoinByPipes)
 {
   SetErrorCode(KO);
 
@@ -1102,28 +1056,30 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShape
   if (aFunction->GetDriverGUID() != GEOMImpl_OffsetDriver::GetID()) return NULL;
 
   GEOMImpl_IOffset aTI (aFunction);
-  aTI.SetShape(anOriginal);
-  aTI.SetValue(theOffset);
+  aTI.SetShape( anOriginal );
+  aTI.SetValue( theOffset );
+  aTI.SetJoinByPipes( theJoinByPipes );
 
   //Compute the offset
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Offset driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
   //Make a Python command
-  GEOM::TPythonDump(aFunction) << "geompy.Offset("
-                               << theObject << ", " << theOffset << ")";
+  if (theJoinByPipes)
+    GEOM::TPythonDump(aFunction) << "geompy.Offset("
+                                 << theObject << ", " << theOffset << ")";
+  else
+    GEOM::TPythonDump(aFunction) << theObject << " = geompy.MakeOffsetIntersectionJoin("
+                                 << theObject << ", " << theOffset << ")";
 
   SetErrorCode(OK);
   return theObject;
@@ -1134,8 +1090,10 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShape
  *  OffsetShapeCopy
  */
 //=============================================================================
-Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShapeCopy
-                              (Handle(GEOM_Object) theObject, double theOffset)
+Handle(GEOM_Object)
+GEOMImpl_ITransformOperations::OffsetShapeCopy( Handle(GEOM_Object) theObject,
+                                                double              theOffset,
+                                                bool                theJoinByPipes)
 {
   SetErrorCode(KO);
 
@@ -1145,7 +1103,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShapeCopy
   if (anOriginal.IsNull()) return NULL; //There is no function which creates an object to be offset
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   //Add a new Offset function
   Handle(GEOM_Function) aFunction =
@@ -1156,28 +1114,30 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShapeCopy
   if (aFunction->GetDriverGUID() != GEOMImpl_OffsetDriver::GetID()) return NULL;
 
   GEOMImpl_IOffset aTI (aFunction);
-  aTI.SetShape(anOriginal);
-  aTI.SetValue(theOffset);
+  aTI.SetShape( anOriginal );
+  aTI.SetValue( theOffset );
+  aTI.SetJoinByPipes( theJoinByPipes );
 
   //Compute the offset
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Offset driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
   //Make a Python command
-  GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MakeOffset("
-                               << theObject << ", " << theOffset << ")";
+  if (theJoinByPipes)
+    GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MakeOffset("
+                                 << theObject << ", " << theOffset << ")";
+  else
+    GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MakeOffsetIntersectionJoin("
+                                 << theObject << ", " << theOffset << ")";
 
   SetErrorCode(OK);
   return aCopy;
@@ -1189,8 +1149,9 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShapeCopy
  *  ProjectShapeCopy
  */
 //=============================================================================
-Handle(GEOM_Object) GEOMImpl_ITransformOperations::ProjectShapeCopy
-       (Handle(GEOM_Object) theSource, Handle(GEOM_Object) theTarget)
+Handle(GEOM_Object)
+GEOMImpl_ITransformOperations::ProjectShapeCopy (Handle(GEOM_Object) theSource,
+                                                 Handle(GEOM_Object) theTarget)
 {
   SetErrorCode(KO);
 
@@ -1199,37 +1160,53 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::ProjectShapeCopy
   Handle(GEOM_Function) aLastFunction = theSource->GetLastFunction();
   if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be projected
 
-  //Add a new Projection object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_PROJECTION);
+  Handle(GEOM_Object) aCopy;
 
-  //Add a Projection function
-  Handle(GEOM_Function) aFunction =
-    aCopy->AddFunction(GEOMImpl_ProjectionDriver::GetID(), PROJECTION_COPY);
+  TopoDS_Shape aTarget = theTarget->GetValue();
+  if ( aTarget.IsNull() ) return NULL;
+  if ( aTarget.ShapeType() == TopAbs_EDGE ||
+       aTarget.ShapeType() == TopAbs_WIRE )
+  {
+    // a TPythonDump prevents dumping ProjectPointOnWire(),
+    // dump of MakeProjection() is done at the end of this function
+    GEOM::TPythonDump preventDump(aLastFunction, /*append=*/true);
+    Standard_Integer dummy;
+    ProjectPointOnWire( theSource, theTarget, aCopy, dummy );
+    if ( aCopy.IsNull() || !IsDone() )
+      return NULL;
+  }
+  else
+  {
+    //Add a new Projection object
+    aCopy = GetEngine()->AddObject(GEOM_PROJECTION);
 
-  //Check if the function is set correctly
-  if (aFunction->GetDriverGUID() != GEOMImpl_ProjectionDriver::GetID()) return NULL;
+    //Add a Projection function
+    Handle(GEOM_Function) aFunction =
+      aCopy->AddFunction(GEOMImpl_ProjectionDriver::GetID(), PROJECTION_COPY);
 
-  GEOMImpl_IMirror aTI (aFunction);
-  aTI.SetPlane(theTarget->GetLastFunction());
-  aTI.SetOriginal(aLastFunction);
+    //Check if the function is set correctly
+    if (aFunction->GetDriverGUID() != GEOMImpl_ProjectionDriver::GetID()) return NULL;
 
-  //Compute the Projection
-  try {
-#if OCC_VERSION_LARGE > 0x06010000
-    OCC_CATCH_SIGNALS;
-#endif
-    if (!GetSolver()->ComputeFunction(aFunction)) {
-      SetErrorCode("Projection driver failed");
+    GEOMImpl_IMirror aTI (aFunction);
+    aTI.SetPlane(theTarget->GetLastFunction());
+    aTI.SetOriginal(aLastFunction);
+
+    //Compute the Projection
+    try {
+      OCC_CATCH_SIGNALS;
+      if (!GetSolver()->ComputeFunction(aFunction)) {
+        SetErrorCode("Projection driver failed");
+        return NULL;
+      }
+    }
+    catch (Standard_Failure& aFail) {
+      SetErrorCode(aFail.GetMessageString());
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
-    return NULL;
-  }
 
   //Make a Python command
+  Handle(GEOM_Function) aFunction = aCopy->GetLastFunction();
   GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MakeProjection("
                                << theSource << ", " << theTarget << ")";
 
@@ -1264,7 +1241,7 @@ Standard_Real GEOMImpl_ITransformOperations::ProjectPointOnWire
   }
 
   //Add a new Projection object
-  thePointOnEdge = GetEngine()->AddObject(GetDocID(), GEOM_PROJECTION);
+  thePointOnEdge = GetEngine()->AddObject(GEOM_PROJECTION);
 
   //Add a Projection function
   Handle(GEOM_Function) aFunction = thePointOnEdge->AddFunction
@@ -1281,17 +1258,14 @@ Standard_Real GEOMImpl_ITransformOperations::ProjectPointOnWire
 
   //Compute the Projection
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Projection driver failed");
       return aResult;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return aResult;
   }
 
@@ -1345,17 +1319,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::ScaleShape
 
   //Compute the scale
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Scale driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1383,7 +1354,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::ScaleShapeCopy
   if (anOriginal.IsNull()) return NULL; //There is no function which creates an object to be scaled
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   //Add a scale function
   Handle(GEOM_Function) aFunction =
@@ -1406,17 +1377,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::ScaleShapeCopy
 
   //Compute the scale
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Scale driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1451,7 +1419,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::ScaleShapeAlongAxes (Handle(G
   Handle(GEOM_Object) aCopy;   //Add a new Copy object
   Handle(GEOM_Function) aFunction;
   if (doCopy) {
-    aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+    aCopy = GetEngine()->AddObject(theObject->GetType());
     aFunction = aCopy->AddFunction(GEOMImpl_ScaleDriver::GetID(), SCALE_SHAPE_AXES_COPY);
   }
   else {
@@ -1477,17 +1445,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::ScaleShapeAlongAxes (Handle(G
 
   //Compute the scale
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Scale driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1542,17 +1507,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::PositionShape
 
   //Compute the Position
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Position driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1580,7 +1542,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::PositionShapeCopy
   if (anOriginal.IsNull()) return NULL; //There is no function which creates an object to be set in position
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   //Add a position function
   Standard_Integer aType = POSITION_SHAPE_COPY;
@@ -1601,17 +1563,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::PositionShapeCopy
 
   //Compute the position
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Position driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1644,7 +1603,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::PositionAlongPath
   Handle(GEOM_Object) aCopy;
 
   if (theCopy) {
-    aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+    aCopy = GetEngine()->AddObject(theObject->GetType());
     aFunction = aCopy->AddFunction(GEOMImpl_PositionDriver::GetID(), POSITION_ALONG_PATH);
   }
   else
@@ -1663,17 +1622,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::PositionAlongPath
 
   //Compute the position
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Position driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1726,17 +1682,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate (Handle(GEOM_Object) t
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Rotate driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1765,7 +1718,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::RotateCopy (Handle(GEOM_Objec
   if (aLastFunction.IsNull()) return NULL;  //There is no function which creates an object to be rotated
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   //Add a rotate function
   aFunction = aCopy->AddFunction(GEOMImpl_RotateDriver::GetID(), ROTATE_COPY);
@@ -1781,17 +1734,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::RotateCopy (Handle(GEOM_Objec
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Rotate driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1820,7 +1770,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate1D (Handle(GEOM_Object)
   if (aLastFunction.IsNull()) return NULL;  //There is no function which creates an object to be rotated
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(theObject->GetType());
 
   //Add a rotate function
   aFunction = aCopy->AddFunction(GEOMImpl_RotateDriver::GetID(), ROTATE_1D);
@@ -1837,17 +1787,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate1D (Handle(GEOM_Object)
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Rotate driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1877,7 +1824,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate1D (Handle(GEOM_Object)
   if (aLastFunction.IsNull()) return NULL;  //There is no function which creates an object to be rotated
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(theObject->GetType());
 
   //Add a rotate function
   aFunction = aCopy->AddFunction(GEOMImpl_RotateDriver::GetID(), ROTATE_1D_STEP);
@@ -1898,17 +1845,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate1D (Handle(GEOM_Object)
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Rotate driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -1940,7 +1884,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate2D (Handle(GEOM_Object)
   if (aLastFunction.IsNull()) return NULL;  //There is no function which creates an object to be rotated
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(theObject->GetType());
 
   //Add a rotate function
   aFunction = aCopy->AddFunction(GEOMImpl_RotateDriver::GetID(), ROTATE_2D);
@@ -1962,17 +1906,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate2D (Handle(GEOM_Object)
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Rotate driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -2005,7 +1946,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate2D (Handle(GEOM_Object)
   if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be rotated
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(theObject->GetType());
 
   //Add a rotate function
   aFunction = aCopy->AddFunction(GEOMImpl_RotateDriver::GetID(), ROTATE_2D);
@@ -2028,17 +1969,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate2D (Handle(GEOM_Object)
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Rotate driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -2091,17 +2029,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::RotateThreePoints (Handle(GEO
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Rotate driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -2131,7 +2066,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::RotateThreePointsCopy (Handle
   if (aLastFunction.IsNull()) return NULL;  //There is no function which creates an object to be rotated
 
   //Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   //Add a rotate function
   aFunction = aCopy->AddFunction(GEOMImpl_RotateDriver::GetID(), ROTATE_THREE_POINTS_COPY);
@@ -2148,17 +2083,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::RotateThreePointsCopy (Handle
 
   //Compute the translation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Rotate driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -2190,7 +2122,7 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TransformLikeOtherCopy
   if (aSampleFunc.IsNull()) return NULL; // There is no function which creates a sample object
 
   // Add a new Copy object
-  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+  Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
 
   // Add a transform function (depends on theSample function)
   Handle(GEOM_Function) aFunction =
@@ -2294,17 +2226,14 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TransformLikeOtherCopy
 
   // Compute the transformation
   try {
-#if OCC_VERSION_LARGE > 0x06010000
     OCC_CATCH_SIGNALS;
-#endif
     if (!GetSolver()->ComputeFunction(aFunction)) {
       SetErrorCode("Driver failed");
       return NULL;
     }
   }
-  catch (Standard_Failure) {
-    Handle(Standard_Failure) aFail = Standard_Failure::Caught();
-    SetErrorCode(aFail->GetMessageString());
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
     return NULL;
   }
 
@@ -2315,3 +2244,73 @@ Handle(GEOM_Object) GEOMImpl_ITransformOperations::TransformLikeOtherCopy
   SetErrorCode(OK);
   return aCopy;
 }
+
+//=============================================================================
+/*!
+ *  MakeProjectionOnCylinder
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_ITransformOperations::MakeProjectionOnCylinder
+                             (const Handle(GEOM_Object) &theObject,
+                              const Standard_Real        theRadius,
+                              const Standard_Real        theStartAngle,
+                              const Standard_Real        theAngleLength,
+                              const Standard_Real        theAngleRotation)
+{
+  SetErrorCode(KO);
+
+  if (theObject.IsNull()) {
+    return NULL;
+  }
+
+  Handle(GEOM_Function) aLastFunction = theObject->GetLastFunction();
+
+  if (aLastFunction.IsNull()) {
+    //There is no function which creates an object to be projected
+    return NULL;
+  }
+
+  //Add a new Projection object
+  Handle(GEOM_Object) aResult =
+    GetEngine()->AddObject(GEOM_PROJECTION);
+
+  //Add a Projection function
+  Handle(GEOM_Function) aFunction = aResult->AddFunction
+    (GEOMImpl_ProjectionDriver::GetID(), PROJECTION_ON_CYLINDER);
+
+  //Check if the function is set correctly
+  if (aFunction->GetDriverGUID() != GEOMImpl_ProjectionDriver::GetID()) {
+    return aResult;
+  }
+
+  GEOMImpl_IProjOnCyl aProj (aFunction);
+
+  aProj.SetShape(aLastFunction);
+  aProj.SetRadius(theRadius);
+  aProj.SetStartAngle(theStartAngle);
+  aProj.SetAngleLength(theAngleLength);
+  aProj.SetAngleRotation(theAngleRotation);
+
+  //Compute the Projection
+  try {
+    OCC_CATCH_SIGNALS;
+    if (!GetSolver()->ComputeFunction(aFunction)) {
+      SetErrorCode("Projection driver failed");
+      return aResult;
+    }
+  }
+  catch (Standard_Failure& aFail) {
+    SetErrorCode(aFail.GetMessageString());
+    return aResult;
+  }
+
+  //Make a Python command
+  GEOM::TPythonDump(aFunction)
+    << aResult << " = geompy.MakeProjectionOnCylinder("
+    << theObject << ", " << theRadius << ", " << theStartAngle
+    << ", " << theAngleLength << ", " << theAngleRotation << ")";
+
+  SetErrorCode(OK);
+
+  return aResult;
+}