-// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
#include <GEOMImpl_ITranslate.hxx>
#include <GEOMImpl_IMirror.hxx>
+#include <GEOMImpl_IProjection.hxx>
+#include <GEOMImpl_IProjOnCyl.hxx>
#include <GEOMImpl_IOffset.hxx>
#include <GEOMImpl_IScale.hxx>
#include <GEOMImpl_IRotate.hxx>
#include <GEOM_Function.hxx>
#include <GEOM_PythonDump.hxx>
-#include <Basics_OCCTVersion.hxx>
-
#include "utilities.h"
#include <OpUtil.hxx>
#include <Utils_ExceptHandlers.hxx>
#include <TFunction_DriverTable.hxx>
#include <TFunction_Driver.hxx>
-#include <TFunction_Logbook.hxx>
#include <TDF_Tool.hxx>
#include <BRep_Tool.hxx>
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Translation driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << "geompy.TrsfOp.TranslateTwoPoints("
+ GEOM::TPythonDump(aFunction) << "geompy.TranslateTwoPoints("
<< theObject << ", " << thePoint1 << ", " << thePoint2 << ")";
SetErrorCode(OK);
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Translation driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
//Add a translate function
Handle(GEOM_Function) aFunction =
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Translation driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
//Add a translate function
Handle(GEOM_Function) aFunction =
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Translation driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Translation driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << "geompy.TrsfOp.TranslateVector("
+ GEOM::TPythonDump(aFunction) << "geompy.TranslateVector("
<< theObject << ", " << theVector << ")";
SetErrorCode(OK);
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
//Add a translate function
Handle(GEOM_Function) aFunction =
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Translation driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Translation driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
{
SetErrorCode(KO);
- if (theObject.IsNull() || theVector.IsNull()) return NULL;
+ if (theObject.IsNull()) return NULL;
Handle(GEOM_Function) aLastFunction = theObject->GetLastFunction();
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
//Check if the function is set correctly
if (aFunction->GetDriverGUID() != GEOMImpl_TranslateDriver::GetID()) return NULL;
- GEOMImpl_ITranslate aTI(aFunction);
- aTI.SetVector(theVector->GetLastFunction());
+ GEOMImpl_ITranslate aTI (aFunction);
aTI.SetOriginal(aLastFunction);
+ if (!theVector.IsNull())
+ aTI.SetVector(theVector->GetLastFunction());
aTI.SetStep1(theStep);
aTI.SetNbIter1(theNbTimes);
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Translation driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
{
SetErrorCode(KO);
- if (theObject.IsNull() || theVector.IsNull() || theVector2.IsNull()) return NULL;
+ if (theObject.IsNull()) return NULL;
Handle(GEOM_Function) aLastFunction = theObject->GetLastFunction();
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
if (aFunction->GetDriverGUID() != GEOMImpl_TranslateDriver::GetID()) return NULL;
GEOMImpl_ITranslate aTI (aFunction);
- aTI.SetVector(theVector->GetLastFunction());
- aTI.SetVector2(theVector2->GetLastFunction());
aTI.SetOriginal(aLastFunction);
+ if (!theVector.IsNull())
+ aTI.SetVector(theVector->GetLastFunction());
aTI.SetStep1(theStep1);
aTI.SetNbIter1(theNbTimes1);
+ if (!theVector2.IsNull())
+ aTI.SetVector2(theVector2->GetLastFunction());
aTI.SetStep2(theStep2);
aTI.SetNbIter2(theNbTimes2);
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Translation driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Compute the mirror
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Mirror driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << "geompy.TrsfOp.MirrorPlane("
+ GEOM::TPythonDump(aFunction) << "geompy.MirrorByPlane("
<< theObject << ", " << thePlane << ")";
SetErrorCode(OK);
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be mirrored
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
//Add a mirror function
Handle(GEOM_Function) aFunction =
//Compute the mirror
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Mirror driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Compute the mirror
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Mirror driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << "geompy.TrsfOp.MirrorPoint("
+ GEOM::TPythonDump(aFunction) << "geompy.MirrorByPoint("
<< theObject << ", " << thePoint << ")";
SetErrorCode(OK);
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be mirrored
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
//Add a mirror function
Handle(GEOM_Function) aFunction =
//Compute the mirror
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Mirror driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Compute the mirror
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Mirror driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << "geompy.TrsfOp.MirrorAxis("
+ GEOM::TPythonDump(aFunction) << "geompy.MirrorByAxis("
<< theObject << ", " << theAxis << ")";
SetErrorCode(OK);
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be mirrored
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
//Add a mirror function
Handle(GEOM_Function) aFunction =
//Compute the mirror
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Mirror driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
* OffsetShape
*/
//=============================================================================
-Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShape
- (Handle(GEOM_Object) theObject, double theOffset)
+Handle(GEOM_Object)
+GEOMImpl_ITransformOperations::OffsetShape (Handle(GEOM_Object) theObject,
+ double theOffset,
+ bool theJoinByPipes)
{
SetErrorCode(KO);
if (aFunction->GetDriverGUID() != GEOMImpl_OffsetDriver::GetID()) return NULL;
GEOMImpl_IOffset aTI (aFunction);
- aTI.SetShape(anOriginal);
- aTI.SetValue(theOffset);
+ aTI.SetShape( anOriginal );
+ aTI.SetValue( theOffset );
+ aTI.SetJoinByPipes( theJoinByPipes );
//Compute the offset
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Offset driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << "geompy.TrsfOp.OffsetShape("
+ GEOM::TPythonDump(aFunction) << "geompy.Offset("
<< theObject << ", " << theOffset << ")";
SetErrorCode(OK);
* OffsetShapeCopy
*/
//=============================================================================
-Handle(GEOM_Object) GEOMImpl_ITransformOperations::OffsetShapeCopy
- (Handle(GEOM_Object) theObject, double theOffset)
+Handle(GEOM_Object)
+GEOMImpl_ITransformOperations::OffsetShapeCopy( Handle(GEOM_Object) theObject,
+ double theOffset,
+ bool theJoinByPipes)
{
SetErrorCode(KO);
if (anOriginal.IsNull()) return NULL; //There is no function which creates an object to be offset
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
//Add a new Offset function
Handle(GEOM_Function) aFunction =
if (aFunction->GetDriverGUID() != GEOMImpl_OffsetDriver::GetID()) return NULL;
GEOMImpl_IOffset aTI (aFunction);
- aTI.SetShape(anOriginal);
- aTI.SetValue(theOffset);
+ aTI.SetShape( anOriginal );
+ aTI.SetValue( theOffset );
+ aTI.SetJoinByPipes( theJoinByPipes );
//Compute the offset
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Offset driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
* ProjectShapeCopy
*/
//=============================================================================
-Handle(GEOM_Object) GEOMImpl_ITransformOperations::ProjectShapeCopy
- (Handle(GEOM_Object) theSource, Handle(GEOM_Object) theTarget)
+Handle(GEOM_Object)
+GEOMImpl_ITransformOperations::ProjectShapeCopy (Handle(GEOM_Object) theSource,
+ Handle(GEOM_Object) theTarget)
{
SetErrorCode(KO);
Handle(GEOM_Function) aLastFunction = theSource->GetLastFunction();
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be projected
+ Handle(GEOM_Object) aCopy;
+
+ TopoDS_Shape aTarget = theTarget->GetValue();
+ if ( aTarget.IsNull() ) return NULL;
+ if ( aTarget.ShapeType() == TopAbs_EDGE ||
+ aTarget.ShapeType() == TopAbs_WIRE )
+ {
+ // a TPythonDump prevents dumping ProjectPointOnWire(),
+ // dump of MakeProjection() is done at the end of this function
+ GEOM::TPythonDump preventDump(aLastFunction, /*append=*/true);
+ Standard_Integer dummy;
+ ProjectPointOnWire( theSource, theTarget, aCopy, dummy );
+ if ( aCopy.IsNull() || !IsDone() )
+ return NULL;
+ }
+ else
+ {
+ //Add a new Projection object
+ aCopy = GetEngine()->AddObject(GetDocID(), GEOM_PROJECTION);
+
+ //Add a Projection function
+ Handle(GEOM_Function) aFunction =
+ aCopy->AddFunction(GEOMImpl_ProjectionDriver::GetID(), PROJECTION_COPY);
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_ProjectionDriver::GetID()) return NULL;
+
+ GEOMImpl_IMirror aTI (aFunction);
+ aTI.SetPlane(theTarget->GetLastFunction());
+ aTI.SetOriginal(aLastFunction);
+
+ //Compute the Projection
+ try {
+ OCC_CATCH_SIGNALS;
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Projection driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
+ return NULL;
+ }
+ }
+
+ //Make a Python command
+ Handle(GEOM_Function) aFunction = aCopy->GetLastFunction();
+ GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MakeProjection("
+ << theSource << ", " << theTarget << ")";
+
+ SetErrorCode(OK);
+ return aCopy;
+}
+
+//=============================================================================
+/*!
+ * ProjectPointOnWire
+ */
+//=============================================================================
+Standard_Real GEOMImpl_ITransformOperations::ProjectPointOnWire
+ (Handle(GEOM_Object) thePoint,
+ Handle(GEOM_Object) theWire,
+ Handle(GEOM_Object) &thePointOnEdge,
+ Standard_Integer &theEdgeInWireIndex)
+{
+ Standard_Real aResult = -1.;
+
+ SetErrorCode(KO);
+
+ if (thePoint.IsNull() || theWire.IsNull()) {
+ return aResult;
+ }
+
+ Handle(GEOM_Function) aLastFunction = thePoint->GetLastFunction();
+
+ if (aLastFunction.IsNull()) {
+ //There is no function which creates an object to be projected
+ return aResult;
+ }
+
//Add a new Projection object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_PROJECTION);
+ thePointOnEdge = GetEngine()->AddObject(GetDocID(), GEOM_PROJECTION);
//Add a Projection function
- Handle(GEOM_Function) aFunction =
- aCopy->AddFunction(GEOMImpl_ProjectionDriver::GetID(), PROJECTION_COPY);
+ Handle(GEOM_Function) aFunction = thePointOnEdge->AddFunction
+ (GEOMImpl_ProjectionDriver::GetID(), PROJECTION_ON_WIRE);
//Check if the function is set correctly
- if (aFunction->GetDriverGUID() != GEOMImpl_ProjectionDriver::GetID()) return NULL;
+ if (aFunction->GetDriverGUID() != GEOMImpl_ProjectionDriver::GetID()) {
+ return aResult;
+ }
- GEOMImpl_IMirror aTI (aFunction);
- aTI.SetPlane(theTarget->GetLastFunction());
- aTI.SetOriginal(aLastFunction);
+ GEOMImpl_IProjection aProj (aFunction);
+ aProj.SetPoint(aLastFunction);
+ aProj.SetShape(theWire->GetLastFunction());
//Compute the Projection
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Projection driver failed");
- return NULL;
+ return aResult;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
- return NULL;
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
+ return aResult;
}
+ aResult = aProj.GetU();
+ theEdgeInWireIndex = aProj.GetIndex();
+
+
//Make a Python command
- GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MakeProjection("
- << theSource << ", " << theTarget << ")";
+ GEOM::TPythonDump(aFunction) << "(u, " << thePointOnEdge
+ << ", EdgeInWireIndex) = geompy.MakeProjectionOnWire(" << thePoint
+ << ", " << theWire << ")";
SetErrorCode(OK);
- return aCopy;
-}
+ return aResult;
+}
//=============================================================================
/*!
//Compute the scale
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Scale driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << "geompy.TrsfOp.ScaleShape("
+ GEOM::TPythonDump(aFunction) << "geompy.Scale("
<< theObject << ", " << thePoint << ", " << theFactor << ")";
SetErrorCode(OK);
if (anOriginal.IsNull()) return NULL; //There is no function which creates an object to be scaled
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
//Add a scale function
Handle(GEOM_Function) aFunction =
//Compute the scale
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Scale driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Compute the scale
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Scale driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
return aCopy;
}
- GEOM::TPythonDump(aFunction) << "geompy.TrsfOp.ScaleShapeAlongAxes("
+ GEOM::TPythonDump(aFunction) << "geompy.ScaleAlongAxes("
<< theObject << ", " << thePoint << ", "
<< theFactorX << ", " << theFactorY << ", " << theFactorZ << ")";
return theObject;
//Compute the Position
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Position driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << "geompy.TrsfOp.PositionShape("
+ GEOM::TPythonDump(aFunction) << "geompy.Position("
<< theObject << ", " << theStartLCS << ", " << theEndLCS << ")";
SetErrorCode(OK);
if (anOriginal.IsNull()) return NULL; //There is no function which creates an object to be set in position
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
//Add a position function
Standard_Integer aType = POSITION_SHAPE_COPY;
//Compute the position
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Position driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Compute the position
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Position driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
if (theCopy) {
- GEOM::TPythonDump(aFunction) << aCopy << " = geompy.PositionAlongPath("
+ GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MakePositionAlongPath("
<< theObject << ", " << thePath << ", " << theDistance << ", " << theCopy << ", " << theReverse << ")";
SetErrorCode(OK);
return aCopy;
}
- GEOM::TPythonDump(aFunction) << "geompy.TrsfOp.PositionAlongPath("
+ GEOM::TPythonDump(aFunction) << "geompy.PositionAlongPath("
<< theObject << ", " << thePath << ", " << theDistance << ", " << theCopy << ", " << theReverse << ")";
SetErrorCode(OK);
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Rotate driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//=============================================================================
/*!
- * Rotate
+ * RotateCopy
*/
//=============================================================================
-Handle(GEOM_Object) GEOMImpl_ITransformOperations::RotateCopy (Handle(GEOM_Object) theObject, Handle(GEOM_Object) theAxis, double theAngle)
+Handle(GEOM_Object) GEOMImpl_ITransformOperations::RotateCopy (Handle(GEOM_Object) theObject,
+ Handle(GEOM_Object) theAxis,
+ double theAngle)
{
SetErrorCode(KO);
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be rotated
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
//Add a rotate function
aFunction = aCopy->AddFunction(GEOMImpl_RotateDriver::GetID(), ROTATE_COPY);
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Rotate driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//=============================================================================
/*!
- * Rotate1D
+ * Rotate1D (for MultiRotate1DNbTimes)
*/
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate1D (Handle(GEOM_Object) theObject,
{
SetErrorCode(KO);
- if (theObject.IsNull() || theAxis.IsNull()) return NULL;
+ if (theObject.IsNull()) return NULL;
Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction();
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be rotated
GEOMImpl_IRotate aRI(aFunction);
aRI.SetOriginal(aLastFunction);
- aRI.SetAxis(theAxis->GetLastFunction());
+ if (!theAxis.IsNull())
+ aRI.SetAxis(theAxis->GetLastFunction());
aRI.SetNbIter1(theNbTimes);
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Rotate driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MultiRotate1D("
+ GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MultiRotate1DNbTimes("
<< theObject << ", " << theAxis << ", " << theNbTimes << ")";
SetErrorCode(OK);
//=============================================================================
/*!
- * Rotate2D
+ * Rotate1D (for MultiRotate1DByStep)
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate1D (Handle(GEOM_Object) theObject,
+ Handle(GEOM_Object) theAxis,
+ double theAngleStep,
+ Standard_Integer theNbSteps)
+{
+ SetErrorCode(KO);
+
+ if (theObject.IsNull()) return NULL;
+
+ Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction();
+ if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be rotated
+
+ //Add a new Copy object
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+
+ //Add a rotate function
+ aFunction = aCopy->AddFunction(GEOMImpl_RotateDriver::GetID(), ROTATE_1D_STEP);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_RotateDriver::GetID()) return NULL;
+
+ //Convert angle into degrees
+ double anAngleStep = theAngleStep * 180. / M_PI;
+
+ GEOMImpl_IRotate aRI (aFunction);
+ aRI.SetOriginal(aLastFunction);
+ if (!theAxis.IsNull())
+ aRI.SetAxis(theAxis->GetLastFunction());
+ aRI.SetAngle(anAngleStep);
+ aRI.SetNbIter1(theNbSteps);
+
+ //Compute the translation
+ try {
+ OCC_CATCH_SIGNALS;
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Rotate driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction)
+ << aCopy << " = geompy.MultiRotate1DByStep(" << theObject << ", "
+ << theAxis << ", " << anAngleStep << "*math.pi/180.0, " << theNbSteps << ")";
+
+ SetErrorCode(OK);
+ return aCopy;
+}
+
+//=============================================================================
+/*!
+ * Rotate2D (for MultiRotate2DNbTimes)
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate2D (Handle(GEOM_Object) theObject,
+ Handle(GEOM_Object) theAxis,
+ Standard_Integer theNbObjects,
+ double theRadialStep,
+ Standard_Integer theNbSteps)
+{
+ SetErrorCode(KO);
+
+ if (theObject.IsNull()) return NULL;
+
+ Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction();
+ if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be rotated
+
+ //Add a new Copy object
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+
+ //Add a rotate function
+ aFunction = aCopy->AddFunction(GEOMImpl_RotateDriver::GetID(), ROTATE_2D);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_RotateDriver::GetID()) return NULL;
+
+ double anAngle = 360. / (double)theNbObjects;
+
+ GEOMImpl_IRotate aRI (aFunction);
+ aRI.SetOriginal(aLastFunction);
+ if (!theAxis.IsNull())
+ aRI.SetAxis(theAxis->GetLastFunction());
+ aRI.SetAngle(anAngle);
+ aRI.SetNbIter1(theNbObjects);
+ aRI.SetStep(theRadialStep);
+ aRI.SetNbIter2(theNbSteps);
+
+ //Compute the translation
+ try {
+ OCC_CATCH_SIGNALS;
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Rotate driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MultiRotate2DNbTimes("
+ << theObject << ", " << theAxis << ", " << theNbObjects
+ << ", " << theRadialStep << ", " << theNbSteps << ")";
+
+ SetErrorCode(OK);
+ return aCopy;
+}
+
+//=============================================================================
+/*!
+ * Rotate2D (for MultiRotate2DByStep)
*/
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ITransformOperations::Rotate2D (Handle(GEOM_Object) theObject,
Handle(GEOM_Object) theAxis,
- double theAngle,
+ double theAngleStep,
Standard_Integer theNbTimes1,
double theStep,
Standard_Integer theNbTimes2)
{
SetErrorCode(KO);
- if (theObject.IsNull() || theAxis.IsNull()) return NULL;
+ if (theObject.IsNull()) return NULL;
Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction();
- if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be rotated
+ if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be rotated
//Add a new Copy object
Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
aFunction = aCopy->AddFunction(GEOMImpl_RotateDriver::GetID(), ROTATE_2D);
if (aFunction.IsNull()) return NULL;
- //Check if the function is set correctly
+ //Check if the function is set correctly
if (aFunction->GetDriverGUID() != GEOMImpl_RotateDriver::GetID()) return NULL;
- GEOMImpl_IRotate aRI(aFunction);
- aRI.SetAxis(theAxis->GetLastFunction());
+ //Convert angle into degrees
+ double anAngleStep = theAngleStep * 180. / M_PI;
+
+ GEOMImpl_IRotate aRI (aFunction);
aRI.SetOriginal(aLastFunction);
+ if (!theAxis.IsNull())
+ aRI.SetAxis(theAxis->GetLastFunction());
+ aRI.SetAngle(anAngleStep);
aRI.SetNbIter1(theNbTimes1);
- aRI.SetNbIter2(theNbTimes2);
- aRI.SetAngle(theAngle);
aRI.SetStep(theStep);
+ aRI.SetNbIter2(theNbTimes2);
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Rotate driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << aCopy << " = geompy.MultiRotate2D("
- << theObject << ", " << theAxis << ", " << theAngle << ", "
- << theNbTimes1 << ", " << theStep << ", " << theNbTimes2 << ")";
+ GEOM::TPythonDump(aFunction)
+ << aCopy << " = geompy.MultiRotate2DByStep(" << theObject << ", "
+ << theAxis << ", " << anAngleStep << "*math.pi/180.0, "
+ << theNbTimes1 << ", " << theStep << ", " << theNbTimes2 << ")";
SetErrorCode(OK);
return aCopy;
if (theObject.IsNull() || theCentPoint.IsNull() || thePoint1.IsNull() || thePoint2.IsNull()) return NULL;
Handle(GEOM_Function) aFunction, aLastFunction = theObject->GetLastFunction();
- if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be rotated
+ if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be rotated
// Get last functions of the arguments
Handle(GEOM_Function) aCPF = theCentPoint->GetLastFunction();
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Rotate driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << "geompy.TrsfOp.RotateThreePoints(" << theObject
+ GEOM::TPythonDump(aFunction) << "geompy.RotateThreePoints(" << theObject
<< ", " << theCentPoint << ", "<<thePoint1 << ", " << thePoint2 << ")";
SetErrorCode(OK);
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be rotated
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
//Add a rotate function
aFunction = aCopy->AddFunction(GEOMImpl_RotateDriver::GetID(), ROTATE_THREE_POINTS_COPY);
//Compute the translation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Rotate driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
if (aSampleFunc.IsNull()) return NULL; // There is no function which creates a sample object
// Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), theObject->GetType());
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
// Add a transform function (depends on theSample function)
Handle(GEOM_Function) aFunction =
// Compute the transformation
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Driver failed");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
SetErrorCode(OK);
return aCopy;
}
+
+//=============================================================================
+/*!
+ * MakeProjectionOnCylinder
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_ITransformOperations::MakeProjectionOnCylinder
+ (const Handle(GEOM_Object) &theObject,
+ const Standard_Real theRadius,
+ const Standard_Real theStartAngle,
+ const Standard_Real theAngleLength,
+ const Standard_Real theAngleRotation)
+{
+ SetErrorCode(KO);
+
+ if (theObject.IsNull()) {
+ return NULL;
+ }
+
+ Handle(GEOM_Function) aLastFunction = theObject->GetLastFunction();
+
+ if (aLastFunction.IsNull()) {
+ //There is no function which creates an object to be projected
+ return NULL;
+ }
+
+ //Add a new Projection object
+ Handle(GEOM_Object) aResult =
+ GetEngine()->AddObject(GetDocID(), GEOM_PROJECTION);
+
+ //Add a Projection function
+ Handle(GEOM_Function) aFunction = aResult->AddFunction
+ (GEOMImpl_ProjectionDriver::GetID(), PROJECTION_ON_CYLINDER);
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_ProjectionDriver::GetID()) {
+ return aResult;
+ }
+
+ GEOMImpl_IProjOnCyl aProj (aFunction);
+
+ aProj.SetShape(aLastFunction);
+ aProj.SetRadius(theRadius);
+ aProj.SetStartAngle(theStartAngle);
+ aProj.SetAngleLength(theAngleLength);
+ aProj.SetAngleRotation(theAngleRotation);
+
+ //Compute the Projection
+ try {
+ OCC_CATCH_SIGNALS;
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Projection driver failed");
+ return aResult;
+ }
+ }
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
+ return aResult;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction)
+ << aResult << " = geompy.MakeProjectionOnCylinder("
+ << theObject << ", " << theRadius << ", " << theStartAngle
+ << ", " << theAngleLength << ", " << theAngleRotation << ")";
+
+ SetErrorCode(OK);
+
+ return aResult;
+}
