-// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#include "GEOM_IOperations.hxx"
#include "GEOMAlgo_State.hxx"
+#include "GEOMUtils.hxx"
-#include <TopoDS_Shape.hxx>
-#include <TopTools_ListOfShape.hxx>
-#include <NCollection_DataMap.hxx>
#include <TColStd_HSequenceOfTransient.hxx>
#include <TColStd_HSequenceOfInteger.hxx>
-#include <Handle_Geom_Surface.hxx>
-
-#include <gp_Pnt.hxx>
+#include <Geom_Surface.hxx>
#include <list>
-#include <functional>
class GEOM_Engine;
class Handle(GEOM_Object);
class Handle(TColStd_HArray1OfInteger);
+class TopoDS_Shape;
class GEOMImpl_IShapesOperations : public GEOM_IOperations
{
Standard_EXPORT Handle(GEOM_Object) MakeFaceWires (std::list<Handle(GEOM_Object)> theWires,
const bool isPlanarWanted);
+ Standard_EXPORT Handle(GEOM_Object) MakeFaceFromSurface
+ (Handle(GEOM_Object) theFace,
+ Handle(GEOM_Object) theWire);
+
+ Standard_EXPORT Handle(GEOM_Object) MakeFaceWithConstraints (std::list<Handle(GEOM_Object)> theConstraints);
+
Standard_EXPORT Handle(GEOM_Object) MakeShell (std::list<Handle(GEOM_Object)> theShapes);
Standard_EXPORT Handle(GEOM_Object) MakeSolidShells (std::list<Handle(GEOM_Object)> theShells);
Standard_EXPORT Handle(GEOM_Object) MakeCompound (std::list<Handle(GEOM_Object)> theShapes);
+ Standard_EXPORT Handle(GEOM_Object) MakeSolidFromConnectedFaces (std::list<Handle(GEOM_Object)> theFacesOrShells,
+ const Standard_Boolean isIntersect);
+
Standard_EXPORT Handle(GEOM_Object) MakeGlueFaces (std::list< Handle(GEOM_Object) >& theShapes,
const Standard_Real theTolerance,
const Standard_Boolean doKeepNonSolids);
Standard_EXPORT TCollection_AsciiString GetShapeTypeString (Handle(GEOM_Object) theShape);
+ Standard_EXPORT Standard_Boolean IsSubShapeBelongsTo(Handle(GEOM_Object) theSubObject,
+ const Standard_Integer theSubObjectIndex,
+ Handle(GEOM_Object) theObject,
+ const Standard_Integer theObjectIndex);
+
Standard_EXPORT Standard_Integer NumberOfSubShapes (Handle(GEOM_Object) theShape,
const Standard_Integer theShapeType);
const Standard_Integer theShapeType);
Standard_EXPORT Handle(TColStd_HSequenceOfTransient)
- GetSharedShapes (std::list<Handle(GEOM_Object)> theShapes,
- const Standard_Integer theShapeType);
+ GetSharedShapes (std::list<Handle(GEOM_Object)>& theShapes,
+ const Standard_Integer theShapeType,
+ const bool theMultiShare = true);
Standard_EXPORT Handle(TColStd_HSequenceOfTransient)
GetShapesOnPlane (const Handle(GEOM_Object)& theShape,
Handle(GEOM_Object) theCenter,
const Standard_Real theRadius);
- void GetShapeProperties(const TopoDS_Shape aShape, Standard_Real propertiesArray[], gp_Pnt & aPnt);
-
Standard_EXPORT Handle(GEOM_Object) GetInPlace (Handle(GEOM_Object) theShapeWhere,
Handle(GEOM_Object) theShapeWhat);
const Standard_Integer theShapeType,
GEOMAlgo_State theState);
+ /*!
+ * \brief Resize the input edge with the new Min and Max parameters.
+ * The input edge parameters range is [0, 1]. If theMin parameter is
+ * negative, the input edge is extended, otherwise it is shrinked by
+ * theMin parameter. If theMax is greater than 1, the edge is extended,
+ * otherwise it is shrinked by theMax parameter
+ * \param theEdge the input edge to be resized
+ * \param theMin the minimal parameter value
+ * \param theMax the maximal parameter value
+ * \retval Handle(GEOM_Object) - newly created edge
+ */
+ Standard_EXPORT Handle(GEOM_Object)
+ ExtendEdge(const Handle(GEOM_Object)& theEdge,
+ const Standard_Real theMin,
+ const Standard_Real theMax);
+
+ /*!
+ * \brief Resize the input face with the new UMin, UMax, VMin and VMax
+ * parameters. The input face U and V parameters range is [0, 1]. If
+ * theUMin parameter is negative, the input face is extended, otherwise
+ * it is shrinked along U direction by theUMin parameter. If theUMax is
+ * greater than 1, the face is extended, otherwise it is shrinked along
+ * U direction by theUMax parameter. So as for theVMin, theVMax and
+ * V direction of the input face.
+ * \param theFace the input face to be resized
+ * \param theUMin the minimal U parameter value
+ * \param theUMax the maximal U parameter value
+ * \param theVMin the minimal V parameter value
+ * \param theVMax the maximal V parameter value
+ * \retval Handle(GEOM_Object) - newly created face
+ */
+ Standard_EXPORT Handle(GEOM_Object)
+ ExtendFace(const Handle(GEOM_Object)& theFace,
+ const Standard_Real theUMin,
+ const Standard_Real theUMax,
+ const Standard_Real theVMin,
+ const Standard_Real theVMax);
+
+ /*!
+ * \brief Make a surface from a face. This function takes some face as
+ * input parameter and creates new GEOM_Object, i.e. topological shape
+ * by extracting underlying surface of the source face and limiting it
+ * by the Umin, Umax, Vmin, Vmax parameters of the source face (in the
+ * parametrical space).
+ * \param theFace the input face
+ * \retval Handle(GEOM_Object) - newly created face
+ */
+ Standard_EXPORT Handle(GEOM_Object)
+ MakeSurfaceFromFace(const Handle(GEOM_Object) &theFace);
+
+ /*!
+ * \brief Explode a shape into edges sorted in a row from a starting point.
+ * \param theShape - the shape to be exploded on edges.
+ * \param theStartPoint - the starting point.
+ * \return Ordered list of edges sorted in a row from a starting point.
+ */
+ Standard_EXPORT Handle(TColStd_HSequenceOfTransient)
+ GetSubShapeEdgeSorted (const Handle(GEOM_Object) &theShape,
+ const Handle(GEOM_Object) &theStartPoint);
+
+ /*!
+ * \brief Return the list of subshapes that satisfies a certain tolerance
+ * criterion. The user defines the type of shapes to be returned, the
+ * condition and the tolerance value. The operation is defined for
+ * faces, edges and vertices only. E.g. for theShapeType FACE, theCondition
+ * CC_GT and theTolerance 1.e-7 this method returns all faces of theShape
+ * that have tolerances greater then 1.e7.
+ *
+ * \param theShape the shape to be exploded
+ * \param theShapeType the type of shapes to be returned. Can have the
+ * values FACE, EDGE and VERTEX only.
+ * \param theCondition the condition type.
+ * \param theTolerance the tolerance filter.
+ * \return the list of shapes that satisfy the conditions.
+ */
+ Standard_EXPORT Handle(TColStd_HSequenceOfTransient) GetSubShapesWithTolerance
+ (const Handle(GEOM_Object) &theShape,
+ const Standard_Integer theShapeType,
+ const GEOMUtils::ComparisonCondition theCondition,
+ const Standard_Real theTolerance);
+
private:
Handle(GEOM_Object) MakeShape (std::list<Handle(GEOM_Object)> theShapes,
const Standard_Integer theObjectType,
const Handle(TColStd_HSequenceOfInteger)& theShapeIDs,
TCollection_AsciiString & theShapeEntries);
+ /*!
+ * \brief Explode a shape into edges sorted in a row from a starting point.
+ * \param theShape - the shape to be exploded on edges.
+ * \param theStartPoint - the starting point.
+ * \return Ordered list of edges sorted in a row from a starting point.
+ */
+ Handle(TColStd_HSequenceOfInteger) getSubShapeEdgeSortedIDs
+ (const Handle(GEOM_Object) &theShape,
+ const Handle(GEOM_Object) &theStartPoint);
+
/*!
* \brief Select the object created last
* \param theObj1 - Object 1
