// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
#include <Standard_Stream.hxx>
#include <TDF_Tool.hxx>
+#include <Standard_Failure.hxx>
#include <Standard_ErrorHandler.hxx> // CAREFUL ! position of this file is critic : see Lucien PIGNOLONI / OCC
//=============================================================================
//Compute the Polyline value
try {
+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Polyline driver failed");
return NULL;
//Compute the Circle value
try {
+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Circle driver failed");
return NULL;
return aCircle;
}
+//=============================================================================
+/*!
+ * MakeCircleCenter2Pnt
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeCircleCenter2Pnt (Handle(GEOM_Object) thePnt1,
+ Handle(GEOM_Object) thePnt2,
+ Handle(GEOM_Object) thePnt3)
+{
+ SetErrorCode(KO);
+
+ if (thePnt1.IsNull() || thePnt2.IsNull() || thePnt3.IsNull()) return NULL;
+
+ //Add a new Circle object
+ Handle(GEOM_Object) aCircle = GetEngine()->AddObject(GetDocID(), GEOM_CIRCLE);
+
+ //Add a new Circle function for creation a circle relatively to center and 2 points
+ Handle(GEOM_Function) aFunction =
+ aCircle->AddFunction(GEOMImpl_CircleDriver::GetID(), CIRCLE_CENTER_TWO_PNT);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_CircleDriver::GetID()) return NULL;
+
+ GEOMImpl_ICircle aCI (aFunction);
+
+ Handle(GEOM_Function) aRefPnt1 = thePnt1->GetLastFunction();
+ Handle(GEOM_Function) aRefPnt2 = thePnt2->GetLastFunction();
+ Handle(GEOM_Function) aRefPnt3 = thePnt3->GetLastFunction();
+
+ if (aRefPnt1.IsNull() || aRefPnt2.IsNull() || aRefPnt3.IsNull()) return NULL;
+
+ aCI.SetPoint1(aRefPnt1);
+ aCI.SetPoint2(aRefPnt2);
+ aCI.SetPoint3(aRefPnt3);
+
+ //Compute the Circle value
+ try {
+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Circle driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aCircle << " = geompy.MakeCircleCenter2Pnt("
+ << thePnt1 << ", " << thePnt2 << ", " << thePnt3 << ")";
+
+ SetErrorCode(OK);
+ return aCircle;
+}
+
//=============================================================================
/*!
* MakeCirclePntVecR
{
SetErrorCode(KO);
- if (thePnt.IsNull() || theVec.IsNull()) return NULL;
+ // Not set thePnt means origin of global CS,
+ // Not set theVec means Z axis of global CS
+ //if (thePnt.IsNull() || theVec.IsNull()) return NULL;
//Add a new Circle object
Handle(GEOM_Object) aCircle = GetEngine()->AddObject(GetDocID(), GEOM_CIRCLE);
GEOMImpl_ICircle aCI (aFunction);
- Handle(GEOM_Function) aRefPnt = thePnt->GetLastFunction();
- Handle(GEOM_Function) aRefVec = theVec->GetLastFunction();
+ if (!thePnt.IsNull()) {
+ Handle(GEOM_Function) aRefPnt = thePnt->GetLastFunction();
+ if (aRefPnt.IsNull()) return NULL;
+ aCI.SetCenter(aRefPnt);
+ }
- if (aRefPnt.IsNull() || aRefVec.IsNull()) return NULL;
+ if (!theVec.IsNull()) {
+ Handle(GEOM_Function) aRefVec = theVec->GetLastFunction();
+ if (aRefVec.IsNull()) return NULL;
+ aCI.SetVector(aRefVec);
+ }
- aCI.SetCenter(aRefPnt);
- aCI.SetVector(aRefVec);
aCI.SetRadius(theR);
//Compute the Circle value
try {
+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Circle driver failed");
return NULL;
{
SetErrorCode(KO);
- if (thePnt.IsNull() || theVec.IsNull()) return NULL;
+ // Not set thePnt means origin of global CS,
+ // Not set theVec means Z axis of global CS
+ //if (thePnt.IsNull() || theVec.IsNull()) return NULL;
//Add a new Ellipse object
Handle(GEOM_Object) anEll = GetEngine()->AddObject(GetDocID(), GEOM_ELLIPSE);
GEOMImpl_IEllipse aCI (aFunction);
- Handle(GEOM_Function) aRefPnt = thePnt->GetLastFunction();
- Handle(GEOM_Function) aRefVec = theVec->GetLastFunction();
+ if (!thePnt.IsNull()) {
+ Handle(GEOM_Function) aRefPnt = thePnt->GetLastFunction();
+ if (aRefPnt.IsNull()) return NULL;
+ aCI.SetCenter(aRefPnt);
+ }
- if (aRefPnt.IsNull() || aRefVec.IsNull()) return NULL;
+ if (!theVec.IsNull()) {
+ Handle(GEOM_Function) aRefVec = theVec->GetLastFunction();
+ if (aRefVec.IsNull()) return NULL;
+ aCI.SetVector(aRefVec);
+ }
- aCI.SetCenter(aRefPnt);
- aCI.SetVector(aRefVec);
aCI.SetRMajor(theRMajor);
aCI.SetRMinor(theRMinor);
//Compute the Ellipse value
try {
+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Ellipse driver failed");
return NULL;
//Add a new Circle Arc function
Handle(GEOM_Function) aFunction =
- anArc->AddFunction(GEOMImpl_ArcDriver::GetID(), CIRC_ARC_THREE_PNT);
- if (aFunction.IsNull()) return NULL;
+ anArc->AddFunction(GEOMImpl_ArcDriver::GetID(), CIRC_ARC_THREE_PNT);
+ if (aFunction.IsNull()) return NULL;
+
//Check if the function is set correctly
if (aFunction->GetDriverGUID() != GEOMImpl_ArcDriver::GetID()) return NULL;
-
GEOMImpl_IArc aCI (aFunction);
Handle(GEOM_Function) aRefPnt1 = thePnt1->GetLastFunction();
Handle(GEOM_Function) aRefPnt2 = thePnt2->GetLastFunction();
Handle(GEOM_Function) aRefPnt3 = thePnt3->GetLastFunction();
+
if (aRefPnt1.IsNull() || aRefPnt2.IsNull() || aRefPnt3.IsNull()) return NULL;
aCI.SetPoint1(aRefPnt1);
aCI.SetPoint2(aRefPnt2);
aCI.SetPoint3(aRefPnt3);
-
+
//Compute the Arc value
try {
+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Arc driver failed");
return NULL;
return anArc;
}
+//=============================================================================
+/*!
+ * MakeArcCenter
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeArcCenter (Handle(GEOM_Object) thePnt1,
+ Handle(GEOM_Object) thePnt2,
+ Handle(GEOM_Object) thePnt3,
+ bool theSense)
+{
+ SetErrorCode(KO);
+ if (thePnt1.IsNull() || thePnt2.IsNull() || thePnt3.IsNull()) return NULL;
+
+ //Add a new Circle Arc object
+ Handle(GEOM_Object) anArc = GetEngine()->AddObject(GetDocID(), GEOM_CIRC_ARC);
+
+ //Add a new Circle Arc function
+ Handle(GEOM_Function) aFunction =
+ anArc->AddFunction(GEOMImpl_ArcDriver::GetID(), CIRC_ARC_CENTER);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_ArcDriver::GetID()) return NULL;
+
+ GEOMImpl_IArc aCI (aFunction);
+
+ Handle(GEOM_Function) aRefPnt1 = thePnt1->GetLastFunction();
+ Handle(GEOM_Function) aRefPnt2 = thePnt2->GetLastFunction();
+ Handle(GEOM_Function) aRefPnt3 = thePnt3->GetLastFunction();
+
+ if (aRefPnt1.IsNull() || aRefPnt2.IsNull() || aRefPnt3.IsNull()) return NULL;
+
+ aCI.SetPoint1(aRefPnt1);
+ aCI.SetPoint2(aRefPnt2);
+ aCI.SetPoint3(aRefPnt3);
+ aCI.SetSense(theSense);
+
+ //Compute the Arc value
+ try {
+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Arc driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << anArc << " = geompy.MakeArcCenter("
+ << thePnt1 << ", " << thePnt2 << ", " << thePnt3 << "," << theSense << ")";
+
+ SetErrorCode(OK);
+ return anArc;
+}
+
//=============================================================================
/*!
* MakeSplineBezier
//Compute the Spline value
try {
+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Spline driver failed");
return NULL;
//Compute the Spline value
try {
+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Spline driver failed");
return NULL;
* MakeSketcher
*/
//=============================================================================
-Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeSketcher
- (const TCollection_AsciiString& theCommand,
- list<double> theWorkingPlane)
+Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeSketcher (const char* theCommand,
+ list<double> theWorkingPlane)
{
SetErrorCode(KO);
- if (theCommand.IsEmpty()) return NULL;
+ if (!theCommand || strcmp(theCommand, "") == 0) return NULL;
//Add a new Sketcher object
Handle(GEOM_Object) aSketcher = GetEngine()->AddObject(GetDocID(), GEOM_SKETCHER);
GEOMImpl_ISketcher aCI (aFunction);
- aCI.SetCommand(theCommand);
+ TCollection_AsciiString aCommand((char*) theCommand);
+ aCI.SetCommand(aCommand);
int ind = 1;
list<double>::iterator it = theWorkingPlane.begin();
//Compute the Sketcher value
try {
+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Sketcher driver failed");
return NULL;
//Make a Python command
GEOM::TPythonDump pd (aFunction);
- pd << aSketcher << " = geompy.MakeSketcher(\"" << theCommand.ToCString() << "\", [";
+ pd << aSketcher << " = geompy.MakeSketcher(\"" << aCommand.ToCString() << "\", [";
it = theWorkingPlane.begin();
pd << (*it++);
*/
//=============================================================================
Handle(GEOM_Object) GEOMImpl_ICurvesOperations::MakeSketcherOnPlane
- (const TCollection_AsciiString& theCommand,
+ (const char* theCommand,
Handle(GEOM_Object) theWorkingPlane)
{
SetErrorCode(KO);
- if (theCommand.IsEmpty()) return NULL;
+ if (!theCommand || strcmp(theCommand, "") == 0) return NULL;
//Add a new Sketcher object
Handle(GEOM_Object) aSketcher = GetEngine()->AddObject(GetDocID(), GEOM_SKETCHER);
if (aFunction->GetDriverGUID() != GEOMImpl_SketcherDriver::GetID()) return NULL;
GEOMImpl_ISketcher aCI (aFunction);
- aCI.SetCommand(theCommand);
+
+ TCollection_AsciiString aCommand((char*) theCommand);
+ aCI.SetCommand(aCommand);
Handle(GEOM_Function) aRefPlane = theWorkingPlane->GetLastFunction();
if (aRefPlane.IsNull()) return NULL;
//Compute the Sketcher value
try {
+#if (OCC_VERSION_MAJOR << 16 | OCC_VERSION_MINOR << 8 | OCC_VERSION_MAINTENANCE) > 0x060100
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Sketcher driver failed");
return NULL;
//Make a Python command
GEOM::TPythonDump (aFunction) << aSketcher << " = geompy.MakeSketcherOnPlane(\""
- << theCommand.ToCString() << "\", " << theWorkingPlane << " )";
+ << aCommand.ToCString() << "\", " << theWorkingPlane << " )";
SetErrorCode(OK);
return aSketcher;
