-#ifdef WNT
+// Copyright (C) 2007-2022 CEA/DEN, EDF R&D, OPEN CASCADE
+//
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
+
+#ifdef WIN32
#pragma warning( disable:4786 )
#endif
#include <GEOMImpl_BlockDriver.hxx>
#include <GEOMImpl_IBlocks.hxx>
#include <GEOMImpl_IBlockTrsf.hxx>
-#include <GEOMImpl_CopyDriver.hxx>
#include <GEOMImpl_Block6Explorer.hxx>
+#include <GEOMUtils.hxx>
+
#include <GEOM_Function.hxx>
#include <GEOM_PythonDump.hxx>
#include <BlockFix_CheckTool.hxx>
#include "utilities.h"
-#include <OpUtil.hxx>
#include <Utils_ExceptHandlers.hxx>
#include <TFunction_DriverTable.hxx>
#include <TFunction_Driver.hxx>
-#include <TFunction_Logbook.hxx>
#include <TDataStd_Integer.hxx>
#include <TDF_Tool.hxx>
#include <Bnd_Box.hxx>
#include <GProp_GProps.hxx>
+#include <Geom_Curve.hxx>
#include <Geom_Surface.hxx>
#include <ShapeAnalysis_Surface.hxx>
#include <Precision.hxx>
+#include <Standard_Failure.hxx>
#include <Standard_ErrorHandler.hxx> // CAREFUL ! position of this file is critic : see Lucien PIGNOLONI / OCC
+
+/**
+ * This function returns Standard_True if the face is quadrangular. It means
+ * that it has only 1 wire with 4 edges. If there are more then 4 edges in
+ * the wire and theToleranceC1 is not negative the new implementation is used.
+ * According to it the face is quadrangular if it is quadrangular according to
+ * an old implementation or if it has a single wire with more then 4 edges
+ * that form exactly 4 bounds of C1 continuity with the given tolerance.
+ *
+ * \param theFace the face to be checked
+ * \param theToleranceC1 if negative, it is not used; otherwise it is used
+ * to check if two neighbor edges of face have C1 continuity.
+ * \return Standard_True if the face is quadrangular; Standard_False otherwise.
+ */
+static Standard_Boolean IsQuadrangle(const TopoDS_Face &theFace,
+ const Standard_Real theToleranceC1)
+{
+ TopExp_Explorer aFExp (theFace, TopAbs_WIRE);
+
+ if (!aFExp.More()) {
+ // no wire in the face
+ return Standard_False;
+ }
+
+ TopoDS_Shape aWire = aFExp.Current();
+
+ aFExp.Next();
+
+ if (aFExp.More()) {
+ // multiple wires in the face
+ return Standard_False;
+ }
+
+ // Check number of edges in the face
+ Standard_Integer aNbEdges = 0;
+ TopTools_MapOfShape aMapEdges;
+ TopExp_Explorer aWExp(aWire, TopAbs_EDGE);
+
+ for (; aWExp.More(); aWExp.Next()) {
+ if (aMapEdges.Add(aWExp.Current())) {
+ aNbEdges++;
+
+ if (aNbEdges > 4) {
+ break;
+ }
+ }
+ }
+
+ if (aNbEdges < 4) {
+ return Standard_False;
+ }
+
+ if (aNbEdges > 4) {
+ if (theToleranceC1 < 0.) {
+ return Standard_False;
+ }
+
+ // Check if a wire has 4 bounds of C1 continuity.
+ BRepTools_WireExplorer aWireExp(TopoDS::Wire(aWire), theFace);
+ TopTools_ListOfShape anEdges;
+
+ for (aNbEdges = 0; aWireExp.More(); aWireExp.Next()) {
+ const TopoDS_Edge &anEdge = aWireExp.Current();
+
+ // Skip degenerated edges.
+ if (!BRep_Tool::Degenerated(anEdge)) {
+ anEdges.Append(anEdge);
+ ++aNbEdges;
+ }
+ }
+
+ if (aNbEdges < 4) {
+ return Standard_False;
+ }
+
+ // Compute number of sharp corners.
+ anEdges.Append(anEdges.First()); // To make a loop.
+
+ TopTools_ListIteratorOfListOfShape anIter(anEdges);
+ Standard_Real aPar[2];
+ Standard_Integer aNbCorners = 0;
+ TopoDS_Edge anEdge1 = TopoDS::Edge(anEdges.First());
+ Handle(Geom_Curve) aCurve1 = BRep_Tool::Curve(anEdge1, aPar[0], aPar[1]);
+ Handle(Geom_Curve) aCurve2;
+ TopoDS_Edge anEdge2;
+ TopoDS_Vertex aCommonVtx;
+ gp_Pnt aPnt;
+ gp_Vec aVec1;
+ gp_Vec aVec2;
+ Standard_Boolean isReversed1 = (anEdge1.Orientation() == TopAbs_REVERSED);
+ Standard_Boolean isReversed2;
+
+ for (anIter.Next(); anIter.More(); anIter.Next()) {
+ TopoDS_Edge anEdge2 = TopoDS::Edge(anIter.Value());
+
+ if (!TopExp::CommonVertex(anEdge1, anEdge2, aCommonVtx)) {
+ // NEVERREACHED
+ return Standard_False;
+ }
+
+ // Check the angle between tangent vectors of 2 curves at this point.
+ Standard_Real aParam1 = BRep_Tool::Parameter(aCommonVtx, anEdge1);
+ Standard_Real aParam2 = BRep_Tool::Parameter(aCommonVtx, anEdge2);
+
+ aCurve2 = BRep_Tool::Curve(anEdge2, aPar[0], aPar[1]);
+ isReversed2 = (anEdge2.Orientation() == TopAbs_REVERSED);
+ aCurve1->D1(aParam1, aPnt, aVec1);
+ aCurve2->D1(aParam2, aPnt, aVec2);
+
+ if (isReversed1) {
+ aVec1.Reverse();
+ }
+
+ if (isReversed2) {
+ aVec2.Reverse();
+ }
+ const Standard_Real anAngle = aVec1.Angle(aVec2);
+
+ if (anAngle > theToleranceC1) {
+ ++aNbCorners;
+
+ if (aNbCorners > 4) {
+ break;
+ }
+ }
+
+ // Go to the next couple of edges.
+ anEdge1 = anEdge2;
+ aCurve1 = aCurve2;
+ isReversed1 = isReversed2;
+ }
+
+ // Check the total number of corners.
+ if (aNbCorners != 4) {
+ return Standard_False;
+ }
+ }
+
+ return Standard_True;
+}
+
//=============================================================================
/*!
* constructor:
*/
//=============================================================================
-GEOMImpl_IBlocksOperations::GEOMImpl_IBlocksOperations (GEOM_Engine* theEngine, int theDocID)
-: GEOM_IOperations(theEngine, theDocID)
+GEOMImpl_IBlocksOperations::GEOMImpl_IBlocksOperations (GEOM_Engine* theEngine)
+: GEOM_IOperations(theEngine)
{
MESSAGE("GEOMImpl_IBlocksOperations::GEOMImpl_IBlocksOperations");
}
theEdge3.IsNull() || theEdge4.IsNull()) return NULL;
//Add a new Face object
- Handle(GEOM_Object) aFace = GetEngine()->AddObject(GetDocID(), GEOM_FACE);
+ Handle(GEOM_Object) aFace = GetEngine()->AddObject(GEOM_FACE);
//Add a new Face function
Handle(GEOM_Function) aFunction =
//Compute the Face value
try {
+ OCC_CATCH_SIGNALS;
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Block driver failed to compute a face");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
if (theEdge1.IsNull() || theEdge2.IsNull()) return NULL;
//Add a new Face object
- Handle(GEOM_Object) aFace = GetEngine()->AddObject(GetDocID(), GEOM_FACE);
+ Handle(GEOM_Object) aFace = GetEngine()->AddObject(GEOM_FACE);
//Add a new Face function
Handle(GEOM_Function) aFunction =
//Compute the Face value
try {
+ OCC_CATCH_SIGNALS;
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Block driver failed to compute a face");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
thePnt3.IsNull() || thePnt4.IsNull()) return NULL;
//Add a new Face object
- Handle(GEOM_Object) aFace = GetEngine()->AddObject(GetDocID(), GEOM_FACE);
+ Handle(GEOM_Object) aFace = GetEngine()->AddObject(GEOM_FACE);
//Add a new Face function
Handle(GEOM_Function) aFunction =
//Compute the Face value
try {
+ OCC_CATCH_SIGNALS;
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Block driver failed to compute a face");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
theFace5.IsNull() || theFace6.IsNull()) return NULL;
//Add a new Solid object
- Handle(GEOM_Object) aBlock = GetEngine()->AddObject(GetDocID(), GEOM_BLOCK);
+ Handle(GEOM_Object) aBlock = GetEngine()->AddObject(GEOM_BLOCK);
//Add a new Block function
Handle(GEOM_Function) aFunction =
//Compute the Block value
try {
+ OCC_CATCH_SIGNALS;
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Block driver failed to compute a block");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
if (theFace1.IsNull() || theFace2.IsNull()) return NULL;
//Add a new Solid object
- Handle(GEOM_Object) aBlock = GetEngine()->AddObject(GetDocID(), GEOM_BLOCK);
+ Handle(GEOM_Object) aBlock = GetEngine()->AddObject(GEOM_BLOCK);
//Add a new Block function
Handle(GEOM_Function) aFunction =
//Compute the Block value
try {
+ OCC_CATCH_SIGNALS;
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Block driver failed to compute a block");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
if (theCompound.IsNull()) return NULL;
//Add a new object
- Handle(GEOM_Object) aBlockComp = GetEngine()->AddObject(GetDocID(), GEOM_COMPOUND);
+ Handle(GEOM_Object) aBlockComp = GetEngine()->AddObject(GEOM_COMPOUND);
//Add a new BlocksComp function
Handle(GEOM_Function) aFunction =
//Compute the Blocks Compound value
try {
+ OCC_CATCH_SIGNALS;
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Block driver failed to compute a blocks compound");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//The GetPoint() doesn't change object so no new function is required.
Handle(GEOM_Function) aFunction = theShape->GetLastFunction();
- TCollection_AsciiString anOldDescr = aFunction->GetDescription();
//Make a Python command
- GEOM::TPythonDump(aFunction) << anOldDescr.ToCString() << "\n\t"
+ GEOM::TPythonDump(aFunction, /*append=*/true)
<< aResult << " = geompy.GetPoint(" << theShape << ", "
- << theX << ", " << theY << ", " << theZ << ", " << theEpsilon << ")";
+ << theX << ", " << theY << ", " << theZ << ", " << theEpsilon << ")";
+
+ SetErrorCode(OK);
+ return aResult;
+}
+
+//=============================================================================
+/*!
+ * GetVertexNearPoint
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_IBlocksOperations::GetVertexNearPoint
+ (Handle(GEOM_Object) theShape,
+ Handle(GEOM_Object) thePoint)
+{
+ SetErrorCode(KO);
+
+ // New Point object
+ Handle(GEOM_Object) aResult;
+
+ // Arguments
+ if (theShape.IsNull() || thePoint.IsNull()) return NULL;
+
+ TopoDS_Shape aBlockOrComp = theShape->GetValue();
+ TopoDS_Shape aPoint = thePoint->GetValue();
+ if (aBlockOrComp.IsNull() || aPoint.IsNull()) {
+ SetErrorCode("Given shape is null");
+ return NULL;
+ }
+
+ if (aPoint.ShapeType() != TopAbs_VERTEX) {
+ SetErrorCode("Element for vertex identification is not a vertex");
+ return NULL;
+ }
+
+ TopoDS_Vertex aVert = TopoDS::Vertex(aPoint);
+ gp_Pnt aP = BRep_Tool::Pnt(aVert);
+
+ // Compute the Vertex value
+ TopoDS_Shape V;
+ bool isFound = false;
+ Standard_Real aDist = RealLast();
+ TopTools_MapOfShape mapShape;
+
+ TopExp_Explorer exp (aBlockOrComp, TopAbs_VERTEX);
+ for (; exp.More(); exp.Next()) {
+ if (mapShape.Add(exp.Current())) {
+ TopoDS_Vertex aVi = TopoDS::Vertex(exp.Current());
+ gp_Pnt aPi = BRep_Tool::Pnt(aVi);
+ Standard_Real aDisti = aPi.Distance(aP);
+ if (aDisti < aDist) {
+ V = aVi;
+ aDist = aDisti;
+ isFound = true;
+ }
+ }
+ }
+
+ if (!isFound) {
+ SetErrorCode("Vertex has not been found");
+ return NULL;
+ }
+
+ TopTools_IndexedMapOfShape anIndices;
+ TopExp::MapShapes(aBlockOrComp, anIndices);
+ Handle(TColStd_HArray1OfInteger) anArray = new TColStd_HArray1OfInteger(1,1);
+ anArray->SetValue(1, anIndices.FindIndex(V));
+ aResult = GetEngine()->AddSubShape(theShape, anArray);
+
+ Handle(GEOM_Function) aFunction = aResult->GetLastFunction();
+
+ // Make a Python command
+ GEOM::TPythonDump(aFunction) << aResult << " = geompy.GetVertexNearPoint("
+ << theShape << ", " << thePoint << ")";
SetErrorCode(OK);
return aResult;
//Compute the Edge value
try {
+ OCC_CATCH_SIGNALS;
TopTools_IndexedDataMapOfShapeListOfShape MVE;
GEOMImpl_Block6Explorer::MapShapesAndAncestors
(aBlockOrComp, TopAbs_VERTEX, TopAbs_EDGE, MVE);
anArray->SetValue(1, anIndices.FindIndex(anEdge));
aResult = GetEngine()->AddSubShape(theShape, anArray);
}
- } catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ } catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Compute the Edge value
try {
- TopoDS_Shape aShape;
-
+ OCC_CATCH_SIGNALS;
TopoDS_Vertex aVert = TopoDS::Vertex(anArg);
+ TopoDS_Shape aShape = GEOMUtils::GetEdgeNearPoint(aBlockOrComp, aVert);
- // 1. Explode blocks on edges
- TopTools_MapOfShape mapShape;
- Standard_Integer nbEdges = 0;
- TopExp_Explorer exp (aBlockOrComp, TopAbs_EDGE);
- for (; exp.More(); exp.Next()) {
- if (mapShape.Add(exp.Current())) {
- nbEdges++;
- }
- }
-
- if (nbEdges == 0) {
- SetErrorCode("Given shape contains no edges");
- return NULL;
- }
-
- mapShape.Clear();
- Standard_Integer ind = 1;
- TopTools_Array1OfShape anEdges (1, nbEdges);
- TColStd_Array1OfReal aDistances (1, nbEdges);
- for (exp.Init(aBlockOrComp, TopAbs_EDGE); exp.More(); exp.Next()) {
- if (mapShape.Add(exp.Current())) {
- TopoDS_Shape anEdge = exp.Current();
- anEdges(ind) = anEdge;
-
- // 2. Classify the point relatively each edge
- BRepExtrema_DistShapeShape aDistTool (aVert, anEdges(ind));
- if (!aDistTool.IsDone()) {
- SetErrorCode("Can not find a distance from the given point to one of edges");
- return NULL;
- }
- aDistances(ind) = aDistTool.Value();
- ind++;
- }
- }
-
- // 3. Define edge, having minimum distance to the point
- Standard_Real nearest = RealLast(), nbFound = 0;
- Standard_Real prec = Precision::Confusion();
- for (ind = 1; ind <= nbEdges; ind++) {
- if (Abs(aDistances(ind) - nearest) < prec) {
- nbFound++;
- } else if (aDistances(ind) < nearest) {
- nearest = aDistances(ind);
- aShape = anEdges(ind);
- nbFound = 1;
- } else {
- }
- }
- if (nbFound > 1) {
- SetErrorCode("Multiple edges near the given point are found");
- return NULL;
- } else if (nbFound == 0) {
- SetErrorCode("There are no edges near the given point");
- return NULL;
- } else {
- TopTools_IndexedMapOfShape anIndices;
- TopExp::MapShapes(aBlockOrComp, anIndices);
- Handle(TColStd_HArray1OfInteger) anArray = new TColStd_HArray1OfInteger(1,1);
- anArray->SetValue(1, anIndices.FindIndex(aShape));
- aResult = GetEngine()->AddSubShape(theShape, anArray);
- }
+ TopTools_IndexedMapOfShape anIndices;
+ TopExp::MapShapes(aBlockOrComp, anIndices);
+ Handle(TColStd_HArray1OfInteger) anArray = new TColStd_HArray1OfInteger(1,1);
+ anArray->SetValue(1, anIndices.FindIndex(aShape));
+ aResult = GetEngine()->AddSubShape(theShape, anArray);
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Compute the Face value
try {
+ OCC_CATCH_SIGNALS;
TopoDS_Shape aShape;
TopTools_IndexedDataMapOfShapeListOfShape MVF;
aResult = GetEngine()->AddSubShape(theShape, anArray);
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
SetErrorCode("Block or compound is null");
return NULL;
}
- if (aBlockOrComp.ShapeType() != TopAbs_SOLID &&
- aBlockOrComp.ShapeType() != TopAbs_COMPOUND &&
- aBlockOrComp.ShapeType() != TopAbs_COMPSOLID) {
- SetErrorCode("Shape is neither a block, nor a compound of blocks");
- return NULL;
- }
TopoDS_Shape anArg1 = theEdge1->GetValue();
TopoDS_Shape anArg2 = theEdge2->GetValue();
//Compute the Face value
try {
+ OCC_CATCH_SIGNALS;
TopoDS_Shape aShape;
TopTools_IndexedDataMapOfShapeListOfShape MEF;
aResult = GetEngine()->AddSubShape(theShape, anArray);
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Compute the Face value
try {
+ OCC_CATCH_SIGNALS;
TopoDS_Shape aShape;
GEOMImpl_Block6Explorer aBlockTool;
anArray->SetValue(1, anIndices.FindIndex(aShape));
aResult = GetEngine()->AddSubShape(theShape, anArray);
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
SetErrorCode("Block or compound is null");
return NULL;
}
- if (aBlockOrComp.ShapeType() != TopAbs_SOLID &&
- aBlockOrComp.ShapeType() != TopAbs_COMPOUND &&
- aBlockOrComp.ShapeType() != TopAbs_COMPSOLID) {
- SetErrorCode("Shape is neither a block, nor a compound of blocks");
- return NULL;
- }
TopoDS_Shape anArg = thePoint->GetValue();
if (anArg.IsNull()) {
//Compute the Face value
try {
+ OCC_CATCH_SIGNALS;
TopoDS_Shape aShape;
TopoDS_Vertex aVert = TopoDS::Vertex(anArg);
aResult = GetEngine()->AddSubShape(theShape, anArray);
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
SetErrorCode("Block or compound is null");
return NULL;
}
- if (aBlockOrComp.ShapeType() != TopAbs_SOLID &&
- aBlockOrComp.ShapeType() != TopAbs_COMPOUND &&
- aBlockOrComp.ShapeType() != TopAbs_COMPSOLID) {
- SetErrorCode("Shape is neither a block, nor a compound of blocks");
- return NULL;
- }
TopoDS_Shape anArg = theVector->GetValue();
if (anArg.IsNull()) {
//Compute the Face value
try {
+ OCC_CATCH_SIGNALS;
TopoDS_Shape aShape;
TopoDS_Edge anEdge = TopoDS::Edge(anArg);
aResult = GetEngine()->AddSubShape(theShape, anArray);
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
return aResult;
}
+//=============================================================================
+/*!
+ * GetShapesNearPoint
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_IBlocksOperations::GetShapesNearPoint
+ (Handle(GEOM_Object) theShape,
+ Handle(GEOM_Object) thePoint,
+ const Standard_Integer theShapeType,
+ const Standard_Real theConstTolerance)
+{
+ SetErrorCode(KO);
+
+ // New object
+ Handle(GEOM_Object) aResult;
+
+ // Arguments
+ if (theShape.IsNull() || thePoint.IsNull()) return NULL;
+
+ TopoDS_Shape aBlockOrComp = theShape->GetValue();
+ if (aBlockOrComp.IsNull()) {
+ SetErrorCode("Block or compound is null");
+ return NULL;
+ }
+
+ TopoDS_Shape anArg = thePoint->GetValue();
+ if (anArg.IsNull()) {
+ SetErrorCode("Null shape is given as argument");
+ return NULL;
+ }
+ if (anArg.ShapeType() != TopAbs_VERTEX) {
+ SetErrorCode("Element for face identification is not a vertex");
+ return NULL;
+ }
+
+ if (theShapeType < TopAbs_SOLID || TopAbs_VERTEX < theShapeType) {
+ SetErrorCode("Invalid type of result is requested");
+ return NULL;
+ }
+
+ Standard_Real theTolerance = theConstTolerance;
+ if (theTolerance < Precision::Confusion()) {
+ theTolerance = Precision::Confusion();
+ }
+
+ // Compute the result
+ try {
+ OCC_CATCH_SIGNALS;
+ TopoDS_Vertex aVert = TopoDS::Vertex(anArg);
+
+ TopTools_MapOfShape mapShape;
+ Standard_Integer nbEdges = 0;
+ TopExp_Explorer exp (aBlockOrComp, TopAbs_ShapeEnum(theShapeType));
+ for (; exp.More(); exp.Next()) {
+ if (mapShape.Add(exp.Current())) {
+ nbEdges++;
+ }
+ }
+
+ if (nbEdges == 0) {
+ SetErrorCode("Given shape contains no sub-shapes of requested type");
+ return NULL;
+ }
+
+ // Calculate distances and find min
+ mapShape.Clear();
+ Standard_Integer ind = 1;
+ Standard_Real aMinDist = RealLast();
+ TopTools_Array1OfShape anEdges (1, nbEdges);
+ TColStd_Array1OfReal aDistances (1, nbEdges);
+ for (exp.Init(aBlockOrComp, TopAbs_ShapeEnum(theShapeType)); exp.More(); exp.Next()) {
+ if (mapShape.Add(exp.Current())) {
+ TopoDS_Shape anEdge = exp.Current();
+ anEdges(ind) = anEdge;
+
+ BRepExtrema_DistShapeShape aDistTool (aVert, anEdges(ind));
+ if (!aDistTool.IsDone()) {
+ SetErrorCode("Can not find a distance from the given point to one of sub-shapes");
+ return NULL;
+ }
+ aDistances(ind) = aDistTool.Value();
+ if (aDistances(ind) < aMinDist) {
+ aMinDist = aDistances(ind);
+ }
+ ind++;
+ }
+ }
+
+ if (aMinDist < RealLast()) {
+ // Collect sub-shapes with distance < (aMinDist + theTolerance)
+ int nbSubShapes = 0;
+ TopTools_Array1OfShape aNearShapes (1, nbEdges);
+ for (ind = 1; ind <= nbEdges; ind++) {
+ if (aDistances(ind) < aMinDist + theTolerance) {
+ nbSubShapes++;
+ aNearShapes(nbSubShapes) = anEdges(ind);
+ }
+ }
+
+ // Add sub-shape
+ TopTools_IndexedMapOfShape anIndices;
+ TopExp::MapShapes(aBlockOrComp, anIndices);
+ Handle(TColStd_HArray1OfInteger) anArray = new TColStd_HArray1OfInteger (1, nbSubShapes);
+ for (ind = 1; ind <= nbSubShapes; ind++) {
+ anArray->SetValue(ind, anIndices.FindIndex(aNearShapes(ind)));
+ }
+ aResult = GetEngine()->AddSubShape(theShape, anArray);
+ }
+ }
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
+ return NULL;
+ }
+
+ if (aResult.IsNull())
+ return NULL;
+
+ Handle(GEOM_Function) aFunction = aResult->GetLastFunction();
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction)
+ << aResult << " = geompy.GetShapesNearPoint(" << theShape << ", " << thePoint
+ << ", " << TopAbs_ShapeEnum(theShapeType) << ", " << theTolerance << ")";
+
+ SetErrorCode(OK);
+ return aResult;
+}
+
//=============================================================================
/*!
* IsCompoundOfBlocks
//Check
isCompOfBlocks = Standard_True;
try {
+ OCC_CATCH_SIGNALS;
TopTools_MapOfShape mapShape;
TopExp_Explorer exp (aBlockOrComp, TopAbs_SOLID);
for (; exp.More(); exp.Next()) {
}
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return isCompOfBlocks;
}
void GEOMImpl_IBlocksOperations::AddBlocksFrom (const TopoDS_Shape& theShape,
TopTools_ListOfShape& BLO,
TopTools_ListOfShape& NOT,
- TopTools_ListOfShape& EXT)
+ TopTools_ListOfShape& EXT,
+ TopTools_ListOfShape& NOQ,
+ const Standard_Real theToleranceC1)
{
TopAbs_ShapeEnum aType = theShape.ShapeType();
switch (aType) {
{
TopoDS_Iterator It (theShape);
for (; It.More(); It.Next()) {
- AddBlocksFrom(It.Value(), BLO, NOT, EXT);
+ AddBlocksFrom(It.Value(), BLO, NOT, EXT, NOQ, theToleranceC1);
}
}
break;
// Check, if there are seam or degenerated edges
BlockFix_CheckTool aTool;
aTool.SetShape(theShape);
+ aTool.SetAngTolerance(theToleranceC1);
aTool.Perform();
if (aTool.NbPossibleBlocks() > 0) {
EXT.Append(theShape);
TopExp_Explorer expF (theShape, TopAbs_FACE);
for (; expF.More(); expF.Next()) {
- if (mapFaces.Add(expF.Current())) {
- nbFaces++;
- if (nbFaces > 6) break;
+ TopoDS_Face aF = TopoDS::Face(expF.Current());
- // get wire
- TopoDS_Shape aF = expF.Current();
- TopExp_Explorer wires (aF, TopAbs_WIRE);
- if (!wires.More()) {
- // no wire in the face
- hasNonQuadr = Standard_True;
- break;
- }
- TopoDS_Shape aWire = wires.Current();
- wires.Next();
- if (wires.More()) {
- // multiple wires in the face
- hasNonQuadr = Standard_True;
- break;
- }
+ if (mapFaces.Add(aF)) {
+ nbFaces++;
- // Check number of edges in the face
- Standard_Integer nbEdges = 0;
- TopTools_MapOfShape mapEdges;
- TopExp_Explorer expW (aWire, TopAbs_EDGE);
- for (; expW.More(); expW.Next()) {
- if (mapEdges.Add(expW.Current())) {
- nbEdges++;
- if (nbEdges > 4) break;
- }
- }
- if (nbEdges != 4) {
+ if (!IsQuadrangle(aF, theToleranceC1)) {
hasNonQuadr = Standard_True;
+ NOQ.Append(aF);//0021483
}
}
}
}
}
break;
- default:
- NOT.Append(theShape);
- }
-}
-
-void AddBlocksFromOld (const TopoDS_Shape& theShape,
- TopTools_ListOfShape& BLO,
- TopTools_ListOfShape& NOT,
- TopTools_ListOfShape& DEG,
- TopTools_ListOfShape& SEA)
-{
- TopAbs_ShapeEnum aType = theShape.ShapeType();
- switch (aType) {
- case TopAbs_COMPOUND:
- case TopAbs_COMPSOLID:
- {
- TopoDS_Iterator It (theShape);
- for (; It.More(); It.Next()) {
- AddBlocksFromOld(It.Value(), BLO, NOT, DEG, SEA);
- }
- }
- break;
- case TopAbs_SOLID:
+ case TopAbs_SHELL: //0021483
+ case TopAbs_FACE: //0021483
{
+ // Count edges in each face
TopTools_MapOfShape mapFaces;
TopExp_Explorer expF (theShape, TopAbs_FACE);
- Standard_Integer nbFaces = 0;
- Standard_Boolean hasNonQuadr = Standard_False;
- Standard_Boolean hasDegenerated = Standard_False;
- Standard_Boolean hasSeam = Standard_False;
for (; expF.More(); expF.Next()) {
- if (mapFaces.Add(expF.Current())) {
- nbFaces++;
- if (nbFaces > 6) break;
-
- // Check number of edges in the face
- Standard_Integer nbEdges = 0;
- TopTools_MapOfShape mapEdges;
-
- // get wire
- TopoDS_Shape aF = expF.Current();
- TopExp_Explorer wires (aF, TopAbs_WIRE);
- if (!wires.More()) {
- // no wire in the face
- hasNonQuadr = Standard_True;
- break;
- }
- TopoDS_Shape aWire = wires.Current();
- wires.Next();
- if (wires.More()) {
- // multiple wires in the face
- hasNonQuadr = Standard_True;
- break;
- }
+ TopoDS_Face aF = TopoDS::Face(expF.Current());
- // iterate on wire
- BRepTools_WireExplorer aWE (TopoDS::Wire(aWire), TopoDS::Face(aF));
- for (; aWE.More(); aWE.Next(), nbEdges++) {
- if (BRep_Tool::Degenerated(aWE.Current())) {
- // degenerated edge found
- hasDegenerated = Standard_True;
-// break;
- }
- if (mapEdges.Contains(aWE.Current())) {
- // seam edge found
- hasSeam = Standard_True;
-// break;
- }
- mapEdges.Add(aWE.Current());
- }
- if (nbEdges != 4) {
- hasNonQuadr = Standard_True;
+ if (mapFaces.Add(aF)) {
+ if (!IsQuadrangle(aF, theToleranceC1)) {
+ NOQ.Append(aF);//0021483
}
}
}
- if (nbFaces == 6) {
- if (hasDegenerated || hasSeam) {
- if (hasDegenerated) {
- DEG.Append(theShape);
- }
- if (hasSeam) {
- SEA.Append(theShape);
- }
- } else if (hasNonQuadr) {
- NOT.Append(theShape);
- } else {
- BLO.Append(theShape);
- }
- } else {
- NOT.Append(theShape);
- }
}
break;
default:
return Standard_False;
}
-//=============================================================================
-/*!
- * CheckCompoundOfBlocksOld
- */
-//=============================================================================
-Standard_Boolean GEOMImpl_IBlocksOperations::CheckCompoundOfBlocksOld
- (Handle(GEOM_Object) theCompound,
- list<BCError>& theErrors)
-{
- SetErrorCode(KO);
-
- if (theCompound.IsNull()) return Standard_False;
- TopoDS_Shape aBlockOrComp = theCompound->GetValue();
-
- Standard_Boolean isCompOfBlocks = Standard_True;
-
- // Map sub-shapes and their indices
- TopTools_IndexedMapOfShape anIndices;
- TopExp::MapShapes(aBlockOrComp, anIndices);
-
- // 1. Report non-blocks
- TopTools_ListOfShape NOT; // Not blocks
- TopTools_ListOfShape DEG; // Hexahedral solids, having degenerated edges
- TopTools_ListOfShape SEA; // Hexahedral solids, having seam edges
- TopTools_ListOfShape BLO; // All blocks from the given compound
- AddBlocksFromOld(aBlockOrComp, BLO, NOT, DEG, SEA);
-
- if (NOT.Extent() > 0) {
- isCompOfBlocks = Standard_False;
- BCError anErr;
- anErr.error = NOT_BLOCK;
- TopTools_ListIteratorOfListOfShape it (NOT);
- for (; it.More(); it.Next()) {
- anErr.incriminated.push_back(anIndices.FindIndex(it.Value()));
- }
- theErrors.push_back(anErr);
- }
-
- if (DEG.Extent() > 0 || SEA.Extent() > 0) {
- isCompOfBlocks = Standard_False;
- BCError anErr;
- anErr.error = EXTRA_EDGE;
-
- TopTools_ListIteratorOfListOfShape itDEG (DEG);
- for (; itDEG.More(); itDEG.Next()) {
- anErr.incriminated.push_back(anIndices.FindIndex(itDEG.Value()));
- }
-
- TopTools_ListIteratorOfListOfShape itSEA (SEA);
- for (; itSEA.More(); itSEA.Next()) {
- anErr.incriminated.push_back(anIndices.FindIndex(itSEA.Value()));
- }
-
- theErrors.push_back(anErr);
- }
-
- Standard_Integer nbBlocks = BLO.Extent();
- if (nbBlocks == 0) {
- isCompOfBlocks = Standard_False;
- SetErrorCode(OK);
- return isCompOfBlocks;
- }
- if (nbBlocks == 1) {
- SetErrorCode(OK);
- return isCompOfBlocks;
- }
-
- // Convert list of blocks into array for easy and fast access
- Standard_Integer ibl = 1;
- TopTools_Array1OfShape aBlocks (1, nbBlocks);
- TopTools_ListIteratorOfListOfShape BLOit (BLO);
- for (; BLOit.More(); BLOit.Next(), ibl++) {
- aBlocks.SetValue(ibl, BLOit.Value());
- }
-
- // 2. Find relations between all blocks,
- // report connection errors (NOT_GLUED and INVALID_CONNECTION)
- TColStd_Array2OfInteger aRelations (1, nbBlocks, 1, nbBlocks);
- aRelations.Init(REL_NOT_CONNECTED);
-
- Standard_Integer row = 1;
- for (row = 1; row <= nbBlocks; row++) {
- TopoDS_Shape aBlock = aBlocks.Value(row);
-
- Standard_Integer col = row + 1;
- for (; col <= nbBlocks; col++) {
- Standard_Integer aRel = BlocksRelation(aBlock, aBlocks.Value(col));
- if (aRel != REL_NOT_CONNECTED) {
- aRelations.SetValue(row, col, aRel);
- aRelations.SetValue(col, row, aRel);
- if (aRel == REL_NOT_GLUED) {
- // report connection error
- isCompOfBlocks = Standard_False;
- BCError anErr;
- anErr.error = NOT_GLUED;
- anErr.incriminated.push_back(anIndices.FindIndex(aBlocks.Value(row)));
- anErr.incriminated.push_back(anIndices.FindIndex(aBlocks.Value(col)));
- theErrors.push_back(anErr);
- } else if (aRel == REL_COLLISION_VV ||
- aRel == REL_COLLISION_FF ||
- aRel == REL_COLLISION_EE ||
- aRel == REL_UNKNOWN) {
- // report connection error
- isCompOfBlocks = Standard_False;
- BCError anErr;
- anErr.error = INVALID_CONNECTION;
- anErr.incriminated.push_back(anIndices.FindIndex(aBlocks.Value(row)));
- anErr.incriminated.push_back(anIndices.FindIndex(aBlocks.Value(col)));
- theErrors.push_back(anErr);
- } else {
- }
- }
- }
- }
-
- // 3. Find largest set of connected (good connection or not glued) blocks
- TColStd_MapOfInteger aProcessedMap;
- TColStd_MapOfInteger aLargestSet;
- TColStd_MapOfInteger aCurrentSet;
- for (ibl = 1; ibl <= nbBlocks; ibl++) {
- if (!aProcessedMap.Contains(ibl)) {
- aCurrentSet.Clear();
- FindConnected(ibl, aRelations, aProcessedMap, aCurrentSet);
- if (aCurrentSet.Extent() > aLargestSet.Extent()) {
- aLargestSet = aCurrentSet;
- }
- }
- }
-
- // 4. Report all blocks, isolated from <aLargestSet>
- BCError anErr;
- anErr.error = NOT_CONNECTED;
- Standard_Boolean hasIsolated = Standard_False;
- for (ibl = 1; ibl <= nbBlocks; ibl++) {
- if (!aLargestSet.Contains(ibl)) {
- aProcessedMap.Clear();
- if (!HasAnyConnection(ibl, aLargestSet, aRelations, aProcessedMap)) {
- // report connection absence
- hasIsolated = Standard_True;
- anErr.incriminated.push_back(anIndices.FindIndex(aBlocks.Value(ibl)));
- }
- }
- }
- if (hasIsolated) {
- isCompOfBlocks = Standard_False;
- theErrors.push_back(anErr);
- }
-
- SetErrorCode(OK);
- return isCompOfBlocks;
-}
-
//=============================================================================
/*!
* PrintBCErrors
*/
//=============================================================================
TCollection_AsciiString GEOMImpl_IBlocksOperations::PrintBCErrors
- (Handle(GEOM_Object) theCompound,
- const list<BCError>& theErrors)
+ (Handle(GEOM_Object) /*theCompound*/,
+ const std::list<BCError>& theErrors)
{
TCollection_AsciiString aDescr;
- list<BCError>::const_iterator errIt = theErrors.begin();
+ std::list<BCError>::const_iterator errIt = theErrors.begin();
int i = 0;
for (; errIt != theErrors.end(); i++, errIt++) {
BCError errStruct = *errIt;
break;
}
- list<int> sshList = errStruct.incriminated;
- list<int>::iterator sshIt = sshList.begin();
+ std::list<int> sshList = errStruct.incriminated;
+ std::list<int>::iterator sshIt = sshList.begin();
int jj = 0;
for (; sshIt != sshList.end(); jj++, sshIt++) {
if (jj > 0)
//=============================================================================
Standard_Boolean GEOMImpl_IBlocksOperations::CheckCompoundOfBlocks
(Handle(GEOM_Object) theCompound,
- list<BCError>& theErrors)
+ const Standard_Real theToleranceC1,
+ std::list<BCError>& theErrors)
{
SetErrorCode(KO);
TopTools_ListOfShape NOT; // Not blocks
TopTools_ListOfShape EXT; // Hexahedral solids, having degenerated and/or seam edges
TopTools_ListOfShape BLO; // All blocks from the given compound
- AddBlocksFrom(aBlockOrComp, BLO, NOT, EXT);
+ TopTools_ListOfShape NOQ; // All non-quadrangular faces
+ AddBlocksFrom(aBlockOrComp, BLO, NOT, EXT, NOQ, theToleranceC1);
// Report non-blocks
if (NOT.Extent() > 0) {
}
// 3. Find not glued blocks
- GEOMAlgo_GlueAnalyser aGD;
+ GEOMAlgo_GlueAnalyser aGD;
aGD.SetShape(aComp);
aGD.SetTolerance(Precision::Confusion());
return isCompOfBlocks;
}
+//=============================================================================
+/*!
+ * GetNonBlocks
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_IBlocksOperations::GetNonBlocks
+ (Handle(GEOM_Object) theShape,
+ const Standard_Real theToleranceC1,
+ Handle(GEOM_Object)& theNonQuads)
+{
+ SetErrorCode(KO);
+
+ if (theShape.IsNull()) return NULL;
+ TopoDS_Shape aShape = theShape->GetValue();
+
+ // Separate blocks from non-blocks
+ TopTools_ListOfShape BLO; // All blocks from the given compound
+ TopTools_ListOfShape NOT; // Not blocks
+ TopTools_ListOfShape EXT; // Hexahedral solids, having degenerated and/or seam edges
+ TopTools_ListOfShape NOQ; // All non-quadrangular faces
+ AddBlocksFrom(aShape, BLO, NOT, EXT, NOQ, theToleranceC1);
+
+ if (NOT.IsEmpty() && EXT.IsEmpty() && NOQ.IsEmpty()) {
+ SetErrorCode("NOT_FOUND_ANY");
+ return NULL;
+ }
+
+ // Map sub-shapes and their indices
+ TopTools_IndexedMapOfShape anIndices;
+ TopExp::MapShapes(aShape, anIndices);
+
+ // Non-blocks
+ Handle(GEOM_Object) aNonBlocks;
+ if (NOT.Extent() > 0 || EXT.Extent() > 0) {
+ Handle(TColStd_HArray1OfInteger) anArray =
+ new TColStd_HArray1OfInteger (1, NOT.Extent() + EXT.Extent());
+ Standard_Integer ii = 1;
+ TopTools_ListIteratorOfListOfShape it1 (NOT);
+ for (; it1.More(); it1.Next(), ii++) {
+ anArray->SetValue(ii, anIndices.FindIndex(it1.Value()));
+ }
+ TopTools_ListIteratorOfListOfShape it2 (EXT);
+ for (; it2.More(); it2.Next(), ii++) {
+ anArray->SetValue(ii, anIndices.FindIndex(it2.Value()));
+ }
+
+ aNonBlocks = GetEngine()->AddSubShape(theShape, anArray);
+ if (aNonBlocks.IsNull()) {
+ SetErrorCode("Error in algorithm: result found, but cannot be returned.");
+ return NULL;
+ }
+ aNonBlocks->SetType(GEOM_GROUP);
+ TDF_Label aFreeLabel = aNonBlocks->GetFreeLabel();
+ TDataStd_Integer::Set(aFreeLabel, (Standard_Integer)TopAbs_SOLID);
+ }
+
+ // Non-quadrangles
+ if (NOQ.Extent() > 0) {
+ Handle(TColStd_HArray1OfInteger) anArray =
+ new TColStd_HArray1OfInteger (1, NOQ.Extent());
+ Standard_Integer ii = 1;
+ TopTools_ListIteratorOfListOfShape it1 (NOQ);
+ for (; it1.More(); it1.Next(), ii++) {
+ anArray->SetValue(ii, anIndices.FindIndex(it1.Value()));
+ }
+
+ theNonQuads = GetEngine()->AddSubShape(theShape, anArray);
+ if (theNonQuads.IsNull()) {
+ SetErrorCode("Error in algorithm: result found, but cannot be returned.");
+ return NULL;
+ }
+ theNonQuads->SetType(GEOM_GROUP);
+ TDF_Label aFreeLabel = theNonQuads->GetFreeLabel();
+ TDataStd_Integer::Set(aFreeLabel, (Standard_Integer)TopAbs_FACE);
+ }
+
+ //Make a Python command
+ Handle(GEOM_Function) aMainShape = theShape->GetLastFunction();
+ GEOM::TPythonDump pd (aMainShape, /*append=*/true);
+ pd << "(";
+ if (aNonBlocks.IsNull())
+ pd << "no_bad_solids";
+ else
+ pd << aNonBlocks;
+ pd << ", ";
+ if (theNonQuads.IsNull())
+ pd << "no_bad_faces";
+ else
+ pd << theNonQuads;
+ pd << ") = geompy.GetNonBlocks(" << theShape << ")";
+
+ SetErrorCode(OK);
+ return aNonBlocks;
+}
+
//=============================================================================
/*!
* RemoveExtraEdges
*/
//=============================================================================
Handle(GEOM_Object) GEOMImpl_IBlocksOperations::RemoveExtraEdges
- (Handle(GEOM_Object) theObject)
+ (Handle(GEOM_Object) theObject,
+ const Standard_Integer theOptimumNbFaces)
{
SetErrorCode(KO);
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be fixed
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
//Add a function
Handle(GEOM_Function) aFunction =
GEOMImpl_IBlockTrsf aTI (aFunction);
aTI.SetOriginal(aLastFunction);
+ aTI.SetOptimumNbFaces(theOptimumNbFaces);
//Compute the fixed shape
try {
+ OCC_CATCH_SIGNALS;
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Block driver failed to remove extra edges of the given shape");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << aCopy
- << " = geompy.RemoveExtraEdges(" << theObject << ")";
+ std::string doUnionFaces = (theOptimumNbFaces < 0) ? "False" : "True";
+ GEOM::TPythonDump(aFunction) << aCopy << " = geompy.RemoveExtraEdges("
+ << theObject << ", " << doUnionFaces.data() << ")";
+
+ SetErrorCode(OK);
+ return aCopy;
+}
+
+//=============================================================================
+/*!
+ * UnionFaces
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_IBlocksOperations::UnionFaces
+ (Handle(GEOM_Object) theObject)
+{
+ SetErrorCode(KO);
+
+ if (theObject.IsNull()) return NULL;
+
+ Handle(GEOM_Function) aLastFunction = theObject->GetLastFunction();
+ if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be fixed
+
+ //Add a new Copy object
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
+
+ //Add a function
+ Handle(GEOM_Function) aFunction =
+ aCopy->AddFunction(GEOMImpl_BlockDriver::GetID(), BLOCK_UNION_FACES);
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_BlockDriver::GetID()) return NULL;
+
+ GEOMImpl_IBlockTrsf aTI (aFunction);
+ aTI.SetOriginal(aLastFunction);
+
+ //Compute the fixed shape
+ try {
+ OCC_CATCH_SIGNALS;
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Block driver failed to remove extra edges of the given shape");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aCopy << " = geompy.UnionFaces("
+ << theObject << ")";
SetErrorCode(OK);
return aCopy;
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be fixed
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
//Add a function
Handle(GEOM_Function) aFunction =
GEOMImpl_IBlockTrsf aTI (aFunction);
aTI.SetOriginal(aLastFunction);
+ // -1 means do not unite faces on common surface (?except case of seam edge between them?)
+ //aTI.SetOptimumNbFaces(-1);
+ aTI.SetOptimumNbFaces(6);
+
//Compute the fixed shape
try {
+ OCC_CATCH_SIGNALS;
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Block driver failed to improve the given blocks compound");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
// Explode
try {
+ OCC_CATCH_SIGNALS;
TopExp_Explorer exp (aBlockOrComp, TopAbs_SOLID);
for (; exp.More(); exp.Next()) {
if (mapShape.Add(exp.Current())) {
}
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return aBlocks;
}
//The explode doesn't change object so no new function is required.
aFunction = theCompound->GetLastFunction();
- TCollection_AsciiString anOldDescr = aFunction->GetDescription();
//Make a Python command
- GEOM::TPythonDump(aFunction) << anOldDescr.ToCString() << "\n\t["
- << anAsciiList.ToCString() << "] = geompy.MakeBlockExplode("
- << theCompound << ", " << theMinNbFaces << ", " << theMaxNbFaces << ")";
+ GEOM::TPythonDump(aFunction, /*append=*/true)
+ << "[" << anAsciiList.ToCString() << "] = geompy.MakeBlockExplode("
+ << theCompound << ", " << theMinNbFaces << ", " << theMaxNbFaces << ")";
SetErrorCode(OK);
return aBlocks;
//Compute the Block value
try {
+ OCC_CATCH_SIGNALS;
TopoDS_Shape aShape;
TopoDS_Vertex aVert = TopoDS::Vertex(anArg);
aResult = GetEngine()->AddSubShape(theCompound, anArray);
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Compute the Block value
try {
+ OCC_CATCH_SIGNALS;
// 1. Explode compound on solids
TopTools_MapOfShape mapShape;
Standard_Integer nbSolids = 0;
anArray->SetValue(1, anIndices.FindIndex(aShape));
aResult = GetEngine()->AddSubShape(theCompound, anArray);
}
- } catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ } catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
//Get the Blocks
try {
+ OCC_CATCH_SIGNALS;
TopTools_MapOfShape mapShape;
Standard_Integer nbSolids = 0;
TopExp_Explorer exp (aBlockOrComp, TopAbs_SOLID);
}
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
//Add a translate function
Handle(GEOM_Function) aFunction =
//Compute the transformation
try {
+ OCC_CATCH_SIGNALS;
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Block driver failed to make multi-transformation");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
if (aLastFunction.IsNull()) return NULL; //There is no function which creates an object to be moved
//Add a new Copy object
- Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GetDocID(), GEOM_COPY);
+ Handle(GEOM_Object) aCopy = GetEngine()->AddObject(GEOM_COPY);
//Add a translate function
Handle(GEOM_Function) aFunction =
//Compute the transformation
try {
+ OCC_CATCH_SIGNALS;
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Block driver failed to make multi-transformation");
return NULL;
}
}
- catch (Standard_Failure) {
- Handle(Standard_Failure) aFail = Standard_Failure::Caught();
- SetErrorCode(aFail->GetMessageString());
+ catch (Standard_Failure& aFail) {
+ SetErrorCode(aFail.GetMessageString());
return NULL;
}
TopTools_MapOfShape mapAcceptedEdges;
TCollection_AsciiString aListRes, anEntry;
+ // Sort shapes in current chain (Mantis issue 21053)
+ TopTools_DataMapOfShapeListOfShape aMapChains;
+ TopTools_ListOfShape aFirstInChains;
+
for (ie = 1; ie <= nbEdges; ie++) {
TopoDS_Shape curE = MEW.FindKey(ie);
listPrevEdges = listCurEdges;
} // while (listPrevEdges.Extent() > 0)
+ // Sort shapes in current chain (Mantis issue 21053)
+ GEOMUtils::SortShapes(currentChain, Standard_False);
+ aFirstInChains.Append(currentChain.First());
+ aMapChains.Bind(currentChain.First(), currentChain);
+ }
+
+ // Sort chains (Mantis issue 21053)
+ GEOMUtils::SortShapes(aFirstInChains, Standard_False);
+
+ // Store sorted chains in the document
+ TopTools_ListIteratorOfListOfShape aChainsIt (aFirstInChains);
+ for (; aChainsIt.More(); aChainsIt.Next()) {
+ TopoDS_Shape aFirstInChain = aChainsIt.Value();
+ const TopTools_ListOfShape& currentChain = aMapChains.Find(aFirstInChain);
+
// Store the chain in the document
Handle(TColStd_HArray1OfInteger) anArray =
new TColStd_HArray1OfInteger (1, currentChain.Extent());
// Set a GROUP type
aChain->SetType(GEOM_GROUP);
- // Set a sub shape type
+ // Set a sub-shape type
TDF_Label aFreeLabel = aChain->GetFreeLabel();
TDataStd_Integer::Set(aFreeLabel, (Standard_Integer)TopAbs_EDGE);
// The Propagation doesn't change object so no new function is required.
Handle(GEOM_Function) aFunction = theShape->GetLastFunction();
- TCollection_AsciiString anOldDescr = aFunction->GetDescription();
// Make a Python command
- GEOM::TPythonDump(aFunction) << anOldDescr.ToCString() << "\n\t["
- << aListRes.ToCString() << "] = geompy.Propagate(" << theShape << ")";
+ GEOM::TPythonDump(aFunction, /*append=*/true)
+ << "[" << aListRes.ToCString() << "] = geompy.Propagate(" << theShape << ")";
SetErrorCode(OK);
return aSeq;