-// Copyright (C) 2005 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+//
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
+//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
+// License as published by the Free Software Foundation; either
// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
+
#include <Standard_Stream.hxx>
+#include <Basics_OCCTVersion.hxx>
+
#include <GEOMImpl_I3DPrimOperations.hxx>
#include "utilities.h"
#include <GEOMImpl_Types.hxx>
#include <GEOMImpl_BoxDriver.hxx>
+#include <GEOMImpl_FaceDriver.hxx>
+#include <GEOMImpl_DiskDriver.hxx>
#include <GEOMImpl_CylinderDriver.hxx>
#include <GEOMImpl_ConeDriver.hxx>
#include <GEOMImpl_SphereDriver.hxx>
#include <GEOMImpl_RevolutionDriver.hxx>
#include <GEOMImpl_ShapeDriver.hxx>
#include <GEOMImpl_FillingDriver.hxx>
+#include <GEOMImpl_ThruSectionsDriver.hxx>
#include <GEOMImpl_IBox.hxx>
+#include <GEOMImpl_IFace.hxx>
+#include <GEOMImpl_IDisk.hxx>
#include <GEOMImpl_ICylinder.hxx>
#include <GEOMImpl_ICone.hxx>
#include <GEOMImpl_ISphere.hxx>
#include <GEOMImpl_IPrism.hxx>
#include <GEOMImpl_IPipe.hxx>
#include <GEOMImpl_IRevolution.hxx>
-#include <GEOMImpl_IShapes.hxx>
#include <GEOMImpl_IFilling.hxx>
+#include <GEOMImpl_IThruSections.hxx>
+#include <GEOMImpl_IPipeDiffSect.hxx>
+#include <GEOMImpl_IPipeShellSect.hxx>
+#include <GEOMImpl_IPipeBiNormal.hxx>
+
+#include <Precision.hxx>
+#include <Standard_Failure.hxx>
#include <Standard_ErrorHandler.hxx> // CAREFUL ! position of this file is critic : see Lucien PIGNOLONI / OCC
//=============================================================================
//Compute the box value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Box driver failed");
return NULL;
//Compute the Box value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Box driver failed");
return NULL;
return aBox;
}
+//=============================================================================
+/*!
+ * MakeFaceHW
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeFaceHW (double theH, double theW, int theOrientation)
+{
+ SetErrorCode(KO);
+
+ if (theH == 0 || theW == 0) return NULL;
+
+ //Add a new Face object
+ Handle(GEOM_Object) aFace = GetEngine()->AddObject(GetDocID(), GEOM_FACE);
+
+ //Add a new Box function for creation a box relatively to two points
+ Handle(GEOM_Function) aFunction = aFace->AddFunction(GEOMImpl_FaceDriver::GetID(), FACE_H_W);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_FaceDriver::GetID()) return aFace;
+
+ GEOMImpl_IFace aFI (aFunction);
+
+ aFI.SetH(theH);
+ aFI.SetW(theW);
+ aFI.SetOrientation(theOrientation);
+
+ //Compute the Face
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Face driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aFace << " = geompy.MakeFaceHW("
+ << theH << ", " << theW << ", " << theOrientation << ")";
+
+ SetErrorCode(OK);
+ return aFace;
+}
+
+//=============================================================================
+/*!
+ * MakeFaceObjHW
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeFaceObjHW (Handle(GEOM_Object) theObj,
+ double theH, double theW)
+{
+ SetErrorCode(KO);
+
+ if (theObj.IsNull()) return NULL;
+
+ //Add a new Face object
+ Handle(GEOM_Object) aFace = GetEngine()->AddObject(GetDocID(), GEOM_FACE);
+
+ //Add a new Box function for creation a box relatively to two points
+ Handle(GEOM_Function) aFunction = aFace->AddFunction(GEOMImpl_FaceDriver::GetID(), FACE_OBJ_H_W);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_FaceDriver::GetID()) return aFace;
+
+ GEOMImpl_IFace aFI (aFunction);
+
+ Handle(GEOM_Function) aRefFunction1 = theObj->GetLastFunction();
+
+ if (aRefFunction1.IsNull())
+ return aFace;
+
+ aFI.SetRef1(aRefFunction1);
+ aFI.SetH(theH);
+ aFI.SetW(theW);
+
+ //Compute the Face
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Face driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aFace << " = geompy.MakeFaceObjHW("
+ << theObj << ", " << theH << ", " << theW << ")";
+
+ SetErrorCode(OK);
+ return aFace;
+}
+
+//=============================================================================
+/*!
+ * MakeDiskPntVecR
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeDiskPntVecR
+ (Handle(GEOM_Object) thePnt, Handle(GEOM_Object) theVec, double theR)
+{
+ SetErrorCode(KO);
+
+ if (thePnt.IsNull() || theVec.IsNull()) return NULL;
+
+ //Add a new Disk object
+ Handle(GEOM_Object) aDisk = GetEngine()->AddObject(GetDocID(), GEOM_FACE);
+
+ //Add a new Disk function for creation a disk relatively to point and vector
+ Handle(GEOM_Function) aFunction =
+ aDisk->AddFunction(GEOMImpl_DiskDriver::GetID(), DISK_PNT_VEC_R);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_DiskDriver::GetID()) return NULL;
+
+ GEOMImpl_IDisk aCI (aFunction);
+
+ Handle(GEOM_Function) aRefPnt = thePnt->GetLastFunction();
+ Handle(GEOM_Function) aRefVec = theVec->GetLastFunction();
+
+ if (aRefPnt.IsNull() || aRefVec.IsNull()) return NULL;
+
+ aCI.SetCenter(aRefPnt);
+ aCI.SetVector(aRefVec);
+ aCI.SetRadius(theR);
+
+ //Compute the Disk value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Disk driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aDisk << " = geompy.MakeDiskPntVecR("
+ << thePnt << ", " << theVec << ", " << theR << ")";
+
+ SetErrorCode(OK);
+ return aDisk;
+}
+
+//=============================================================================
+/*!
+ * MakeDiskThreePnt
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeDiskThreePnt (Handle(GEOM_Object) thePnt1,
+ Handle(GEOM_Object) thePnt2,
+ Handle(GEOM_Object) thePnt3)
+{
+ SetErrorCode(KO);
+
+ if (thePnt1.IsNull() || thePnt2.IsNull() || thePnt3.IsNull()) return NULL;
+
+ //Add a new Disk object
+ Handle(GEOM_Object) aDisk = GetEngine()->AddObject(GetDocID(), GEOM_FACE);
+
+ //Add a new Disk function for creation a disk relatively to three points
+ Handle(GEOM_Function) aFunction =
+ aDisk->AddFunction(GEOMImpl_DiskDriver::GetID(), DISK_THREE_PNT);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_DiskDriver::GetID()) return NULL;
+
+ GEOMImpl_IDisk aCI (aFunction);
+
+ Handle(GEOM_Function) aRefPnt1 = thePnt1->GetLastFunction();
+ Handle(GEOM_Function) aRefPnt2 = thePnt2->GetLastFunction();
+ Handle(GEOM_Function) aRefPnt3 = thePnt3->GetLastFunction();
+
+ if (aRefPnt1.IsNull() || aRefPnt2.IsNull() || aRefPnt3.IsNull()) return NULL;
+
+ aCI.SetPoint1(aRefPnt1);
+ aCI.SetPoint2(aRefPnt2);
+ aCI.SetPoint3(aRefPnt3);
+
+ //Compute the Disk value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Disk driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aDisk << " = geompy.MakeDiskThreePnt("
+ << thePnt1 << ", " << thePnt2 << ", " << thePnt3 << ")";
+
+ SetErrorCode(OK);
+ return aDisk;
+}
+
+//=============================================================================
+/*!
+ * MakeDiskR
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeDiskR (double theR, int theOrientation)
+{
+ SetErrorCode(KO);
+
+ if (theR == 0 ) return NULL;
+
+ //Add a new Disk object
+ Handle(GEOM_Object) aDisk = GetEngine()->AddObject(GetDocID(), GEOM_FACE);
+
+ //Add a new Box function for creation a box relatively to two points
+ Handle(GEOM_Function) aFunction = aDisk->AddFunction(GEOMImpl_DiskDriver::GetID(), DISK_R);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_DiskDriver::GetID()) return aDisk;
+
+ GEOMImpl_IDisk aDI (aFunction);
+
+ aDI.SetRadius(theR);
+ aDI.SetOrientation(theOrientation);
+
+ //Compute the Disk
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Disk driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aDisk << " = geompy.MakeDiskR("
+ << theR << ", " << theOrientation << ")";
+
+ SetErrorCode(OK);
+ return aDisk;
+}
//=============================================================================
/*!
//Compute the Cylinder value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Cylinder driver failed");
return NULL;
//Compute the Cylinder value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Cylinder driver failed");
return NULL;
//Compute the Cone value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Cone driver failed");
return NULL;
//Compute the Cone value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Cone driver failed");
return NULL;
//Compute the Sphere value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Sphere driver failed");
return NULL;
//Compute the Sphere value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Sphere driver failed");
return NULL;
//Compute the Torus value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Torus driver failed");
return NULL;
//Compute the Torus value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Torus driver failed");
return NULL;
//=============================================================================
Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePrismVecH (Handle(GEOM_Object) theBase,
Handle(GEOM_Object) theVec,
- double theH)
+ double theH, double theScaleFactor)
{
SetErrorCode(KO);
aCI.SetBase(aRefBase);
aCI.SetVector(aRefVec);
aCI.SetH(theH);
+ aCI.SetScale(theScaleFactor);
//Compute the Prism value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
- SetErrorCode("Prism driver failed");
+ //SetErrorCode("Prism driver failed");
+ SetErrorCode("Extrusion can not be created, check input data");
return NULL;
}
}
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << aPrism << " = geompy.MakePrismVecH("
- << theBase << ", " << theVec << ", " << theH << ")";
+ GEOM::TPythonDump pd (aFunction);
+ pd << aPrism << " = geompy.MakePrismVecH(" << theBase << ", " << theVec << ", " << theH;
+ if (theScaleFactor > Precision::Confusion())
+ pd << ", " << theScaleFactor << ")";
+ else
+ pd << ")";
SetErrorCode(OK);
return aPrism;
//=============================================================================
/*!
- * MakePrismTwoPnt
+ * MakePrismVecH2Ways
*/
//=============================================================================
-Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePrismTwoPnt
- (Handle(GEOM_Object) theBase,
- Handle(GEOM_Object) thePoint1, Handle(GEOM_Object) thePoint2)
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePrismVecH2Ways (Handle(GEOM_Object) theBase,
+ Handle(GEOM_Object) theVec,
+ double theH)
{
SetErrorCode(KO);
- if (theBase.IsNull() || thePoint1.IsNull() || thePoint2.IsNull()) return NULL;
+ if (theBase.IsNull() || theVec.IsNull()) return NULL;
//Add a new Prism object
Handle(GEOM_Object) aPrism = GetEngine()->AddObject(GetDocID(), GEOM_PRISM);
- //Add a new Prism function for creation a Prism relatively to two points
+ //Add a new Prism function for creation a Prism relatively to vector
Handle(GEOM_Function) aFunction =
- aPrism->AddFunction(GEOMImpl_PrismDriver::GetID(), PRISM_BASE_TWO_PNT);
+ aPrism->AddFunction(GEOMImpl_PrismDriver::GetID(), PRISM_BASE_VEC_H_2WAYS);
if (aFunction.IsNull()) return NULL;
//Check if the function is set correctly
GEOMImpl_IPrism aCI (aFunction);
Handle(GEOM_Function) aRefBase = theBase->GetLastFunction();
- Handle(GEOM_Function) aRefPnt1 = thePoint1->GetLastFunction();
- Handle(GEOM_Function) aRefPnt2 = thePoint2->GetLastFunction();
+ Handle(GEOM_Function) aRefVec = theVec->GetLastFunction();
- if (aRefBase.IsNull() || aRefPnt1.IsNull() || aRefPnt2.IsNull()) return NULL;
+ if (aRefBase.IsNull() || aRefVec.IsNull()) return NULL;
aCI.SetBase(aRefBase);
- aCI.SetFirstPoint(aRefPnt1);
- aCI.SetLastPoint(aRefPnt2);
+ aCI.SetVector(aRefVec);
+ aCI.SetH(theH);
//Compute the Prism value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
- SetErrorCode("Prism driver failed");
+ //SetErrorCode("Prism driver failed");
+ SetErrorCode("Extrusion can not be created, check input data");
return NULL;
}
}
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << aPrism << " = geompy.MakePrism("
- << theBase << ", " << thePoint1 << ", " << thePoint2 << ")";
+ GEOM::TPythonDump(aFunction) << aPrism << " = geompy.MakePrismVecH2Ways("
+ << theBase << ", " << theVec << ", " << theH << ")";
SetErrorCode(OK);
return aPrism;
}
-
//=============================================================================
/*!
- * MakePipe
+ * MakePrismTwoPnt
*/
//=============================================================================
-Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePipe (Handle(GEOM_Object) theBase,
- Handle(GEOM_Object) thePath)
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePrismTwoPnt
+ (Handle(GEOM_Object) theBase,
+ Handle(GEOM_Object) thePoint1, Handle(GEOM_Object) thePoint2,
+ double theScaleFactor)
{
SetErrorCode(KO);
- if (theBase.IsNull() || thePath.IsNull()) return NULL;
+ if (theBase.IsNull() || thePoint1.IsNull() || thePoint2.IsNull()) return NULL;
- //Add a new Pipe object
- Handle(GEOM_Object) aPipe = GetEngine()->AddObject(GetDocID(), GEOM_PIPE);
+ //Add a new Prism object
+ Handle(GEOM_Object) aPrism = GetEngine()->AddObject(GetDocID(), GEOM_PRISM);
- //Add a new Pipe function
+ //Add a new Prism function for creation a Prism relatively to two points
Handle(GEOM_Function) aFunction =
- aPipe->AddFunction(GEOMImpl_PipeDriver::GetID(), PIPE_BASE_PATH);
+ aPrism->AddFunction(GEOMImpl_PrismDriver::GetID(), PRISM_BASE_TWO_PNT);
if (aFunction.IsNull()) return NULL;
//Check if the function is set correctly
- if (aFunction->GetDriverGUID() != GEOMImpl_PipeDriver::GetID()) return NULL;
+ if (aFunction->GetDriverGUID() != GEOMImpl_PrismDriver::GetID()) return NULL;
- GEOMImpl_IPipe aCI (aFunction);
+ GEOMImpl_IPrism aCI (aFunction);
Handle(GEOM_Function) aRefBase = theBase->GetLastFunction();
- Handle(GEOM_Function) aRefPath = thePath->GetLastFunction();
+ Handle(GEOM_Function) aRefPnt1 = thePoint1->GetLastFunction();
+ Handle(GEOM_Function) aRefPnt2 = thePoint2->GetLastFunction();
- if (aRefBase.IsNull() || aRefPath.IsNull()) return NULL;
+ if (aRefBase.IsNull() || aRefPnt1.IsNull() || aRefPnt2.IsNull()) return NULL;
aCI.SetBase(aRefBase);
- aCI.SetPath(aRefPath);
+ aCI.SetFirstPoint(aRefPnt1);
+ aCI.SetLastPoint(aRefPnt2);
+ aCI.SetScale(theScaleFactor);
- //Compute the Pipe value
+ //Compute the Prism value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
- SetErrorCode("Pipe driver failed");
+ //SetErrorCode("Prism driver failed");
+ SetErrorCode("Extrusion can not be created, check input data");
return NULL;
}
}
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << aPipe << " = geompy.MakePipe("
- << theBase << ", " << thePath << ")";
+ GEOM::TPythonDump pd (aFunction);
+ pd << aPrism << " = geompy.MakePrism(" << theBase << ", " << thePoint1 << ", " << thePoint2;
+ if (theScaleFactor > Precision::Confusion())
+ pd << ", " << theScaleFactor << ")";
+ else
+ pd << ")";
SetErrorCode(OK);
- return aPipe;
+ return aPrism;
}
-
//=============================================================================
/*!
- * MakeRevolutionAxisAngle
+ * MakePrismTwoPnt2Ways
*/
//=============================================================================
-Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeRevolutionAxisAngle (Handle(GEOM_Object) theBase,
- Handle(GEOM_Object) theAxis,
- double theAngle)
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePrismTwoPnt2Ways
+ (Handle(GEOM_Object) theBase,
+ Handle(GEOM_Object) thePoint1, Handle(GEOM_Object) thePoint2)
{
SetErrorCode(KO);
- if (theBase.IsNull() || theAxis.IsNull()) return NULL;
+ if (theBase.IsNull() || thePoint1.IsNull() || thePoint2.IsNull()) return NULL;
- //Add a new Revolution object
- Handle(GEOM_Object) aRevolution = GetEngine()->AddObject(GetDocID(), GEOM_REVOLUTION);
+ //Add a new Prism object
+ Handle(GEOM_Object) aPrism = GetEngine()->AddObject(GetDocID(), GEOM_PRISM);
- //Add a new Revolution function for creation a revolution relatively to axis
+ //Add a new Prism function for creation a Prism relatively to two points
Handle(GEOM_Function) aFunction =
- aRevolution->AddFunction(GEOMImpl_RevolutionDriver::GetID(), REVOLUTION_BASE_AXIS_ANGLE);
+ aPrism->AddFunction(GEOMImpl_PrismDriver::GetID(), PRISM_BASE_TWO_PNT_2WAYS);
if (aFunction.IsNull()) return NULL;
//Check if the function is set correctly
- if (aFunction->GetDriverGUID() != GEOMImpl_RevolutionDriver::GetID()) return NULL;
+ if (aFunction->GetDriverGUID() != GEOMImpl_PrismDriver::GetID()) return NULL;
- GEOMImpl_IRevolution aCI (aFunction);
+ GEOMImpl_IPrism aCI (aFunction);
Handle(GEOM_Function) aRefBase = theBase->GetLastFunction();
- Handle(GEOM_Function) aRefAxis = theAxis->GetLastFunction();
+ Handle(GEOM_Function) aRefPnt1 = thePoint1->GetLastFunction();
+ Handle(GEOM_Function) aRefPnt2 = thePoint2->GetLastFunction();
+
+ if (aRefBase.IsNull() || aRefPnt1.IsNull() || aRefPnt2.IsNull()) return NULL;
+
+ aCI.SetBase(aRefBase);
+ aCI.SetFirstPoint(aRefPnt1);
+ aCI.SetLastPoint(aRefPnt2);
+
+ //Compute the Prism value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ //SetErrorCode("Prism driver failed");
+ SetErrorCode("Extrusion can not be created, check input data");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aPrism << " = geompy.MakePrism2Ways("
+ << theBase << ", " << thePoint1 << ", " << thePoint2 << ")";
+
+ SetErrorCode(OK);
+ return aPrism;
+}
+
+//=============================================================================
+/*!
+ * MakePrismDXDYDZ
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePrismDXDYDZ
+ (Handle(GEOM_Object) theBase, double theDX, double theDY, double theDZ,
+ double theScaleFactor)
+{
+ SetErrorCode(KO);
+
+ if (theBase.IsNull()) return NULL;
+
+ //Add a new Prism object
+ Handle(GEOM_Object) aPrism = GetEngine()->AddObject(GetDocID(), GEOM_PRISM);
+
+ //Add a new Prism function for creation a Prism by DXDYDZ
+ Handle(GEOM_Function) aFunction =
+ aPrism->AddFunction(GEOMImpl_PrismDriver::GetID(), PRISM_BASE_DXDYDZ);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_PrismDriver::GetID()) return NULL;
+
+ GEOMImpl_IPrism aCI (aFunction);
+
+ Handle(GEOM_Function) aRefBase = theBase->GetLastFunction();
+
+ if (aRefBase.IsNull()) return NULL;
+
+ aCI.SetBase(aRefBase);
+ aCI.SetDX(theDX);
+ aCI.SetDY(theDY);
+ aCI.SetDZ(theDZ);
+ aCI.SetScale(theScaleFactor);
+
+ //Compute the Prism value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Extrusion can not be created, check input data");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump pd (aFunction);
+ pd << aPrism << " = geompy.MakePrismDXDYDZ("
+ << theBase << ", " << theDX << ", " << theDY << ", " << theDZ;
+ if (theScaleFactor > Precision::Confusion())
+ pd << ", " << theScaleFactor << ")";
+ else
+ pd << ")";
+
+ SetErrorCode(OK);
+ return aPrism;
+}
+
+//=============================================================================
+/*!
+ * MakePrismDXDYDZ_2WAYS
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePrismDXDYDZ2Ways
+ (Handle(GEOM_Object) theBase, double theDX, double theDY, double theDZ)
+{
+ SetErrorCode(KO);
+
+ if (theBase.IsNull()) return NULL;
+
+ //Add a new Prism object
+ Handle(GEOM_Object) aPrism = GetEngine()->AddObject(GetDocID(), GEOM_PRISM);
+
+ //Add a new Prism function for creation a Prism by DXDYDZ
+ Handle(GEOM_Function) aFunction =
+ aPrism->AddFunction(GEOMImpl_PrismDriver::GetID(), PRISM_BASE_DXDYDZ_2WAYS);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_PrismDriver::GetID()) return NULL;
+
+ GEOMImpl_IPrism aCI (aFunction);
+
+ Handle(GEOM_Function) aRefBase = theBase->GetLastFunction();
+
+ if (aRefBase.IsNull()) return NULL;
+
+ aCI.SetBase(aRefBase);
+ aCI.SetDX(theDX);
+ aCI.SetDY(theDY);
+ aCI.SetDZ(theDZ);
+
+ //Compute the Prism value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Extrusion can not be created, check input data");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aPrism << " = geompy.MakePrismDXDYDZ2Ways("
+ << theBase << ", " << theDX << ", " << theDY << ", " << theDZ << ")";
+
+ SetErrorCode(OK);
+ return aPrism;
+}
+
+//=============================================================================
+/*!
+ * MakeDraftPrism
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeDraftPrism
+ (Handle(GEOM_Object) theInitShape ,Handle(GEOM_Object) theBase, double theHeight, double theAngle, bool theFuse)
+{
+ SetErrorCode(KO);
+
+ if (theBase.IsNull() || theInitShape.IsNull()) return NULL;
+
+ Handle(GEOM_Object) aPrism = NULL;
+
+ if ( theFuse )
+ {
+ //Add a new Extruded Boss object
+ aPrism = GetEngine()->AddObject(GetDocID(), GEOM_EXTRUDED_BOSS);
+ }
+ else
+ {
+ //Add a new Extruded Cut object
+ aPrism = GetEngine()->AddObject(GetDocID(), GEOM_EXTRUDED_CUT);
+ }
+
+ //Add a new Prism function for the creation of a Draft Prism feature
+ Handle(GEOM_Function) aFunction =
+ aPrism->AddFunction(GEOMImpl_PrismDriver::GetID(), DRAFT_PRISM_FEATURE);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_PrismDriver::GetID()) return NULL;
+
+ GEOMImpl_IPrism aCI (aFunction);
+
+ Handle(GEOM_Function) aRefInit = theInitShape->GetLastFunction();
+ Handle(GEOM_Function) aRefBase = theBase->GetLastFunction();
+
+ if (aRefBase.IsNull() || aRefInit.IsNull()) return NULL;
+
+ // Set parameters
+ aCI.SetBase(aRefBase);
+ aCI.SetInitShape(aRefInit);
+ aCI.SetH(theHeight);
+ aCI.SetDraftAngle(theAngle);
+ if ( theFuse )
+ aCI.SetFuseFlag(1);
+ else
+ aCI.SetFuseFlag(0);
+
+ //Compute the Draft Prism Feature value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Extrusion can not be created, check input data");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ if(theFuse)
+ {
+ GEOM::TPythonDump(aFunction) << aPrism << " = geompy.MakeExtrudedBoss("
+ << theInitShape << ", " << theBase << ", " << theHeight << ", " << theAngle << ")";
+ }
+ else
+ {
+ GEOM::TPythonDump(aFunction) << aPrism << " = geompy.MakeExtrudedCut("
+ << theInitShape << ", " << theBase << ", " << theHeight << ", " << theAngle << ")";
+ }
+
+ SetErrorCode(OK);
+ return aPrism;
+}
+
+//=============================================================================
+/*!
+ * MakePipe
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePipe (Handle(GEOM_Object) theBase,
+ Handle(GEOM_Object) thePath)
+{
+ SetErrorCode(KO);
+
+ if (theBase.IsNull() || thePath.IsNull()) return NULL;
+
+ //Add a new Pipe object
+ Handle(GEOM_Object) aPipe = GetEngine()->AddObject(GetDocID(), GEOM_PIPE);
+
+ //Add a new Pipe function
+ Handle(GEOM_Function) aFunction =
+ aPipe->AddFunction(GEOMImpl_PipeDriver::GetID(), PIPE_BASE_PATH);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_PipeDriver::GetID()) return NULL;
+
+ GEOMImpl_IPipe aCI (aFunction);
+
+ Handle(GEOM_Function) aRefBase = theBase->GetLastFunction();
+ Handle(GEOM_Function) aRefPath = thePath->GetLastFunction();
+
+ if (aRefBase.IsNull() || aRefPath.IsNull()) return NULL;
+
+ aCI.SetBase(aRefBase);
+ aCI.SetPath(aRefPath);
+
+ //Compute the Pipe value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Pipe driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aPipe << " = geompy.MakePipe("
+ << theBase << ", " << thePath << ")";
+
+ SetErrorCode(OK);
+ return aPipe;
+}
+
+
+//=============================================================================
+/*!
+ * MakeRevolutionAxisAngle
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeRevolutionAxisAngle (Handle(GEOM_Object) theBase,
+ Handle(GEOM_Object) theAxis,
+ double theAngle)
+{
+ SetErrorCode(KO);
+
+ if (theBase.IsNull() || theAxis.IsNull()) return NULL;
+
+ //Add a new Revolution object
+ Handle(GEOM_Object) aRevolution = GetEngine()->AddObject(GetDocID(), GEOM_REVOLUTION);
+
+ //Add a new Revolution function for creation a revolution relatively to axis
+ Handle(GEOM_Function) aFunction =
+ aRevolution->AddFunction(GEOMImpl_RevolutionDriver::GetID(), REVOLUTION_BASE_AXIS_ANGLE);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_RevolutionDriver::GetID()) return NULL;
+
+ GEOMImpl_IRevolution aCI (aFunction);
+
+ Handle(GEOM_Function) aRefBase = theBase->GetLastFunction();
+ Handle(GEOM_Function) aRefAxis = theAxis->GetLastFunction();
if (aRefBase.IsNull() || aRefAxis.IsNull()) return NULL;
//Compute the Revolution value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Revolution driver failed");
return NULL;
//Make a Python command
GEOM::TPythonDump(aFunction) << aRevolution << " = geompy.MakeRevolution("
- << theBase << ", " << theAxis << ", " << theAngle * 180.0 / PI << "*math.pi/180.0)";
+ << theBase << ", " << theAxis << ", " << theAngle * 180.0 / M_PI << "*math.pi/180.0)";
SetErrorCode(OK);
return aRevolution;
}
-
//=============================================================================
/*!
- * MakeSolidShell
+ * MakeRevolutionAxisAngle2Ways
*/
//=============================================================================
-Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeSolidShell (Handle(GEOM_Object) theShell)
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeRevolutionAxisAngle2Ways
+ (Handle(GEOM_Object) theBase, Handle(GEOM_Object) theAxis, double theAngle)
{
SetErrorCode(KO);
- if (theShell.IsNull()) return NULL;
+ if (theBase.IsNull() || theAxis.IsNull()) return NULL;
- //Add a new Solid object
- Handle(GEOM_Object) aSolid = GetEngine()->AddObject(GetDocID(), GEOM_SOLID);
+ //Add a new Revolution object
+ Handle(GEOM_Object) aRevolution = GetEngine()->AddObject(GetDocID(), GEOM_REVOLUTION);
- //Add a new Solid function for creation a solid from a shell
+ //Add a new Revolution function for creation a revolution relatively to axis
Handle(GEOM_Function) aFunction =
- aSolid->AddFunction(GEOMImpl_ShapeDriver::GetID(), SOLID_SHELL);
+ aRevolution->AddFunction(GEOMImpl_RevolutionDriver::GetID(), REVOLUTION_BASE_AXIS_ANGLE_2WAYS);
if (aFunction.IsNull()) return NULL;
//Check if the function is set correctly
- if (aFunction->GetDriverGUID() != GEOMImpl_ShapeDriver::GetID()) return NULL;
+ if (aFunction->GetDriverGUID() != GEOMImpl_RevolutionDriver::GetID()) return NULL;
- GEOMImpl_IShapes aCI (aFunction);
+ GEOMImpl_IRevolution aCI (aFunction);
- Handle(GEOM_Function) aRefShell = theShell->GetLastFunction();
+ Handle(GEOM_Function) aRefBase = theBase->GetLastFunction();
+ Handle(GEOM_Function) aRefAxis = theAxis->GetLastFunction();
- if (aRefShell.IsNull()) return NULL;
+ if (aRefBase.IsNull() || aRefAxis.IsNull()) return NULL;
- aCI.SetBase(aRefShell);
+ aCI.SetBase(aRefBase);
+ aCI.SetAxis(aRefAxis);
+ aCI.SetAngle(theAngle);
- //Compute the Solid value
+ //Compute the Revolution value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
- SetErrorCode("Solid driver failed");
+ SetErrorCode("Revolution driver failed");
return NULL;
}
}
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << aSolid << " = geompy.MakeSolid(" << theShell << ")";
+ GEOM::TPythonDump(aFunction) << aRevolution << " = geompy.MakeRevolution2Ways("
+ << theBase << ", " << theAxis << ", " << theAngle * 180.0 / M_PI << "*math.pi/180.0)";
SetErrorCode(OK);
- return aSolid;
+ return aRevolution;
}
//=============================================================================
//=============================================================================
Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeFilling
(Handle(GEOM_Object) theShape, int theMinDeg, int theMaxDeg,
- double theTol2D, double theTol3D, int theNbIter)
+ double theTol2D, double theTol3D, int theNbIter,
+ int theMethod, bool isApprox)
{
SetErrorCode(KO);
aFI.SetTol2D(theTol2D);
aFI.SetTol3D(theTol3D);
aFI.SetNbIter(theNbIter);
+ aFI.SetApprox(isApprox);
+ aFI.SetMethod(theMethod);
//Compute the Solid value
try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Filling driver failed");
return NULL;
}
//Make a Python command
- GEOM::TPythonDump(aFunction) << aFilling << " = geompy.MakeFilling("
- << theShape << ", " << theMinDeg << ", " << theMaxDeg << ", "
- << theTol2D << ", " << theTol3D << ", " << theNbIter << ")";
+ GEOM::TPythonDump pd (aFunction);
+ pd << aFilling << " = geompy.MakeFilling(" << theShape ;
+ if ( theMinDeg != 2 ) pd << ", theMinDeg=" << theMinDeg ;
+ if ( theMaxDeg != 5 ) pd << ", theMaxDeg=" << theMaxDeg ;
+ if ( fabs(theTol2D-0.0001) > Precision::Confusion() )
+ pd << ", theTol2D=" << theTol2D ;
+ if ( fabs(theTol3D-0.0001) > Precision::Confusion() )
+ pd << ", theTol3D=" << theTol3D ;
+ if ( theNbIter != 0 ) pd << ", theNbIter=" << theNbIter ;
+ if ( theMethod==1 ) pd << ", theMethod=GEOM.FOM_UseOri";
+ else if( theMethod==2 ) pd << ", theMethod=GEOM.FOM_AutoCorrect";
+ if(isApprox) pd << ", isApprox=" << isApprox ;
+ pd << ")";
SetErrorCode(OK);
return aFilling;
}
+
+//=============================================================================
+/*!
+ * MakeThruSections
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeThruSections(
+ const Handle(TColStd_HSequenceOfTransient)& theSeqSections,
+ bool theModeSolid,
+ double thePreci,
+ bool theRuled)
+{
+ Handle(GEOM_Object) anObj;
+ SetErrorCode(KO);
+ if(theSeqSections.IsNull())
+ return anObj;
+
+ Standard_Integer nbObj = theSeqSections->Length();
+ if (!nbObj)
+ return anObj;
+
+ //Add a new ThruSections object
+ Handle(GEOM_Object) aThruSect = GetEngine()->AddObject(GetDocID(), GEOM_THRUSECTIONS);
+
+
+ //Add a new ThruSections function
+
+ int aTypeFunc = (theRuled ? THRUSECTIONS_RULED : THRUSECTIONS_SMOOTHED);
+ Handle(GEOM_Function) aFunction =
+ aThruSect->AddFunction(GEOMImpl_ThruSectionsDriver::GetID(), aTypeFunc);
+ if (aFunction.IsNull()) return anObj;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_ThruSectionsDriver::GetID()) return NULL;
+
+ GEOMImpl_IThruSections aCI (aFunction);
+
+ Handle(TColStd_HSequenceOfTransient) aSeqSections = new TColStd_HSequenceOfTransient;
+
+ Standard_Integer i =1;
+ for( ; i <= nbObj; i++) {
+
+ Handle(Standard_Transient) anItem = theSeqSections->Value(i);
+ if(anItem.IsNull())
+ continue;
+
+ Handle(GEOM_Object) aSectObj = Handle(GEOM_Object)::DownCast(anItem);
+ if(!aSectObj.IsNull())
+ {
+ Handle(GEOM_Function) aRefSect = aSectObj->GetLastFunction();
+ if(!aRefSect.IsNull())
+ aSeqSections->Append(aRefSect);
+ }
+ }
+
+ if(!aSeqSections->Length())
+ return anObj;
+
+ aCI.SetSections(aSeqSections);
+ aCI.SetSolidMode(theModeSolid);
+ aCI.SetPrecision(thePreci);
+
+ //Compute the ThruSections value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("ThruSections driver failed");
+ return anObj;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return anObj;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump pyDump(aFunction);
+ pyDump << aThruSect << " = geompy.MakeThruSections([";
+
+ for(i =1 ; i <= nbObj; i++) {
+
+ Handle(Standard_Transient) anItem = theSeqSections->Value(i);
+ if(anItem.IsNull())
+ continue;
+
+ Handle(GEOM_Object) aSectObj = Handle(GEOM_Object)::DownCast(anItem);
+ if(!aSectObj.IsNull()) {
+ pyDump<< aSectObj;
+ if(i < nbObj)
+ pyDump<<", ";
+ }
+ }
+
+ pyDump<< "],"<<theModeSolid << "," << thePreci <<","<< theRuled <<")";
+
+ SetErrorCode(OK);
+ return aThruSect;
+}
+
+
+//=============================================================================
+/*!
+ * MakePipeWithDifferentSections
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePipeWithDifferentSections(
+ const Handle(TColStd_HSequenceOfTransient)& theBases,
+ const Handle(TColStd_HSequenceOfTransient)& theLocations,
+ const Handle(GEOM_Object)& thePath,
+ bool theWithContact,
+ bool theWithCorrections)
+{
+ Handle(GEOM_Object) anObj;
+ SetErrorCode(KO);
+ if(theBases.IsNull())
+ return anObj;
+
+ Standard_Integer nbBases = theBases->Length();
+
+ if (!nbBases)
+ return anObj;
+
+ Standard_Integer nbLocs = (theLocations.IsNull() ? 0 :theLocations->Length());
+ //Add a new Pipe object
+ Handle(GEOM_Object) aPipeDS = GetEngine()->AddObject(GetDocID(), GEOM_PIPE);
+
+ //Add a new Pipe function
+
+ Handle(GEOM_Function) aFunction =
+ aPipeDS->AddFunction(GEOMImpl_PipeDriver::GetID(), PIPE_DIFFERENT_SECTIONS);
+ if (aFunction.IsNull()) return anObj;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_PipeDriver::GetID()) return anObj;
+
+ GEOMImpl_IPipeDiffSect aCI (aFunction);
+
+ Handle(GEOM_Function) aRefPath = thePath->GetLastFunction();
+ if(aRefPath.IsNull())
+ return anObj;
+
+ Handle(TColStd_HSequenceOfTransient) aSeqBases = new TColStd_HSequenceOfTransient;
+ Handle(TColStd_HSequenceOfTransient) aSeqLocs = new TColStd_HSequenceOfTransient;
+
+ Standard_Integer i =1;
+ for( ; i <= nbBases; i++) {
+
+ Handle(Standard_Transient) anItem = theBases->Value(i);
+ if(anItem.IsNull())
+ continue;
+
+ Handle(GEOM_Object) aBase = Handle(GEOM_Object)::DownCast(anItem);
+ if(aBase.IsNull())
+ continue;
+ Handle(GEOM_Function) aRefBase = aBase->GetLastFunction();
+ if(aRefBase.IsNull())
+ continue;
+ if(nbLocs)
+ {
+ Handle(Standard_Transient) anItemLoc = theLocations->Value(i);
+ if(anItemLoc.IsNull())
+ continue;
+
+ Handle(GEOM_Object) aLoc = Handle(GEOM_Object)::DownCast(anItemLoc);
+ if(aLoc.IsNull())
+ continue;
+ Handle(GEOM_Function) aRefLoc = aLoc->GetLastFunction();
+ if(aRefLoc.IsNull())
+ continue;
+ aSeqLocs->Append(aRefLoc);
+ }
+ aSeqBases->Append(aRefBase);
+ }
+
+ if(!aSeqBases->Length())
+ return anObj;
+
+ aCI.SetBases(aSeqBases);
+ aCI.SetLocations(aSeqLocs);
+ aCI.SetPath(aRefPath);
+ aCI.SetWithContactMode(theWithContact);
+ aCI.SetWithCorrectionMode(theWithCorrections);
+
+ //Compute the Pipe value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Pipe with defferent section driver failed");
+ return anObj;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return anObj;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump pyDump(aFunction);
+ pyDump << aPipeDS << " = geompy.MakePipeWithDifferentSections([";
+
+ for(i =1 ; i <= nbBases; i++) {
+
+ Handle(Standard_Transient) anItem = theBases->Value(i);
+ if(anItem.IsNull())
+ continue;
+
+ Handle(GEOM_Object) anObj = Handle(GEOM_Object)::DownCast(anItem);
+ if(!anObj.IsNull()) {
+ pyDump<< anObj;
+ if(i < nbBases)
+ pyDump<<", ";
+ }
+ }
+
+ pyDump<< "], [";
+
+ for(i =1 ; i <= nbLocs; i++) {
+
+ Handle(Standard_Transient) anItem = theLocations->Value(i);
+ if(anItem.IsNull())
+ continue;
+
+ Handle(GEOM_Object) anObj = Handle(GEOM_Object)::DownCast(anItem);
+ if(!anObj.IsNull()) {
+ pyDump<< anObj;
+ if(i < nbLocs)
+ pyDump<<", ";
+ }
+ }
+
+ pyDump<< "], "<<thePath<<","<<theWithContact << "," << theWithCorrections<<")";
+
+ SetErrorCode(OK);
+ return aPipeDS;
+}
+
+
+//=============================================================================
+/*!
+ * MakePipeWithShellSections
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePipeWithShellSections(
+ const Handle(TColStd_HSequenceOfTransient)& theBases,
+ const Handle(TColStd_HSequenceOfTransient)& theSubBases,
+ const Handle(TColStd_HSequenceOfTransient)& theLocations,
+ const Handle(GEOM_Object)& thePath,
+ bool theWithContact,
+ bool theWithCorrections)
+{
+ Handle(GEOM_Object) anObj;
+ SetErrorCode(KO);
+ if(theBases.IsNull())
+ return anObj;
+
+ Standard_Integer nbBases = theBases->Length();
+
+ if (!nbBases)
+ return anObj;
+
+ Standard_Integer nbSubBases = (theSubBases.IsNull() ? 0 :theSubBases->Length());
+
+ Standard_Integer nbLocs = (theLocations.IsNull() ? 0 :theLocations->Length());
+
+ //Add a new Pipe object
+ Handle(GEOM_Object) aPipeDS = GetEngine()->AddObject(GetDocID(), GEOM_PIPE);
+
+ //Add a new Pipe function
+
+ Handle(GEOM_Function) aFunction =
+ aPipeDS->AddFunction(GEOMImpl_PipeDriver::GetID(), PIPE_SHELL_SECTIONS);
+ if (aFunction.IsNull()) return anObj;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_PipeDriver::GetID()) return anObj;
+
+ //GEOMImpl_IPipeDiffSect aCI (aFunction);
+ GEOMImpl_IPipeShellSect aCI (aFunction);
+
+ Handle(GEOM_Function) aRefPath = thePath->GetLastFunction();
+ if(aRefPath.IsNull())
+ return anObj;
+
+ Handle(TColStd_HSequenceOfTransient) aSeqBases = new TColStd_HSequenceOfTransient;
+ Handle(TColStd_HSequenceOfTransient) aSeqSubBases = new TColStd_HSequenceOfTransient;
+ Handle(TColStd_HSequenceOfTransient) aSeqLocs = new TColStd_HSequenceOfTransient;
+
+ Standard_Integer i =1;
+ for( ; i <= nbBases; i++) {
+
+ Handle(Standard_Transient) anItem = theBases->Value(i);
+ if(anItem.IsNull())
+ continue;
+ Handle(GEOM_Object) aBase = Handle(GEOM_Object)::DownCast(anItem);
+ if(aBase.IsNull())
+ continue;
+ Handle(GEOM_Function) aRefBase = aBase->GetLastFunction();
+ if(aRefBase.IsNull())
+ continue;
+
+ if( nbSubBases >= nbBases ) {
+ Handle(Standard_Transient) aSubItem = theSubBases->Value(i);
+ if(aSubItem.IsNull())
+ continue;
+ Handle(GEOM_Object) aSubBase = Handle(GEOM_Object)::DownCast(aSubItem);
+ if(aSubBase.IsNull())
+ continue;
+ Handle(GEOM_Function) aRefSubBase = aSubBase->GetLastFunction();
+ if(aRefSubBase.IsNull())
+ continue;
+ aSeqSubBases->Append(aRefSubBase);
+ }
+
+ if(nbLocs) {
+ Handle(Standard_Transient) anItemLoc = theLocations->Value(i);
+ if(anItemLoc.IsNull())
+ continue;
+ Handle(GEOM_Object) aLoc = Handle(GEOM_Object)::DownCast(anItemLoc);
+ if(aLoc.IsNull())
+ continue;
+ Handle(GEOM_Function) aRefLoc = aLoc->GetLastFunction();
+ if(aRefLoc.IsNull())
+ continue;
+ aSeqLocs->Append(aRefLoc);
+ }
+
+ aSeqBases->Append(aRefBase);
+ }
+
+ if(!aSeqBases->Length())
+ return anObj;
+
+ aCI.SetBases(aSeqBases);
+ aCI.SetSubBases(aSeqSubBases);
+ aCI.SetLocations(aSeqLocs);
+ aCI.SetPath(aRefPath);
+ aCI.SetWithContactMode(theWithContact);
+ aCI.SetWithCorrectionMode(theWithCorrections);
+
+ //Compute the Pipe value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Pipe with shell sections driver failed");
+ return anObj;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return anObj;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump pyDump(aFunction);
+ pyDump << aPipeDS << " = geompy.MakePipeWithShellSections([";
+
+ for(i =1 ; i <= nbBases; i++) {
+
+ Handle(Standard_Transient) anItem = theBases->Value(i);
+ if(anItem.IsNull())
+ continue;
+
+ Handle(GEOM_Object) anObj = Handle(GEOM_Object)::DownCast(anItem);
+ if(!anObj.IsNull()) {
+ pyDump<< anObj;
+ if(i < nbBases)
+ pyDump<<", ";
+ }
+ }
+
+ pyDump<< "], [";
+
+ for(i =1 ; i <= nbSubBases; i++) {
+
+ Handle(Standard_Transient) anItem = theSubBases->Value(i);
+ if(anItem.IsNull())
+ continue;
+
+ Handle(GEOM_Object) anObj = Handle(GEOM_Object)::DownCast(anItem);
+ if(!anObj.IsNull()) {
+ pyDump<< anObj;
+ if(i < nbBases)
+ pyDump<<", ";
+ }
+ }
+
+ pyDump<< "], [";
+
+ for(i =1 ; i <= nbLocs; i++) {
+
+ Handle(Standard_Transient) anItem = theLocations->Value(i);
+ if(anItem.IsNull())
+ continue;
+
+ Handle(GEOM_Object) anObj = Handle(GEOM_Object)::DownCast(anItem);
+ if(!anObj.IsNull()) {
+ pyDump<< anObj;
+ if(i < nbLocs)
+ pyDump<<", ";
+ }
+ }
+
+ pyDump<< "], "<<thePath<<","<<theWithContact << "," << theWithCorrections<<")";
+
+ SetErrorCode(OK);
+ return aPipeDS;
+
+}
+
+
+//=============================================================================
+/*!
+ * MakePipeShellsWithoutPath
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePipeShellsWithoutPath(
+ const Handle(TColStd_HSequenceOfTransient)& theBases,
+ const Handle(TColStd_HSequenceOfTransient)& theLocations)
+{
+ Handle(GEOM_Object) anObj;
+ SetErrorCode(KO);
+ if(theBases.IsNull())
+ return anObj;
+
+ Standard_Integer nbBases = theBases->Length();
+
+ if (!nbBases)
+ return anObj;
+
+ Standard_Integer nbLocs = (theLocations.IsNull() ? 0 :theLocations->Length());
+
+ //Add a new Pipe object
+ Handle(GEOM_Object) aPipeDS = GetEngine()->AddObject(GetDocID(), GEOM_PIPE);
+
+ //Add a new Pipe function
+
+ Handle(GEOM_Function) aFunction =
+ aPipeDS->AddFunction(GEOMImpl_PipeDriver::GetID(), PIPE_SHELLS_WITHOUT_PATH);
+ if (aFunction.IsNull()) return anObj;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_PipeDriver::GetID()) return anObj;
+
+ GEOMImpl_IPipeShellSect aCI (aFunction);
+
+ Handle(TColStd_HSequenceOfTransient) aSeqBases = new TColStd_HSequenceOfTransient;
+ Handle(TColStd_HSequenceOfTransient) aSeqLocs = new TColStd_HSequenceOfTransient;
+
+ Standard_Integer i =1;
+ for( ; i <= nbBases; i++) {
+
+ Handle(Standard_Transient) anItem = theBases->Value(i);
+ if(anItem.IsNull())
+ continue;
+ Handle(GEOM_Object) aBase = Handle(GEOM_Object)::DownCast(anItem);
+ if(aBase.IsNull())
+ continue;
+ Handle(GEOM_Function) aRefBase = aBase->GetLastFunction();
+ if(aRefBase.IsNull())
+ continue;
+
+ if(nbLocs) {
+ Handle(Standard_Transient) anItemLoc = theLocations->Value(i);
+ if(anItemLoc.IsNull())
+ continue;
+ Handle(GEOM_Object) aLoc = Handle(GEOM_Object)::DownCast(anItemLoc);
+ if(aLoc.IsNull())
+ continue;
+ Handle(GEOM_Function) aRefLoc = aLoc->GetLastFunction();
+ if(aRefLoc.IsNull())
+ continue;
+ aSeqLocs->Append(aRefLoc);
+ }
+
+ aSeqBases->Append(aRefBase);
+ }
+
+ if(!aSeqBases->Length())
+ return anObj;
+
+ aCI.SetBases(aSeqBases);
+ aCI.SetLocations(aSeqLocs);
+
+ //Compute the Pipe value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Pipe with shell sections without path driver failed");
+ return anObj;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return anObj;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump pyDump(aFunction);
+ pyDump << aPipeDS << " = geompy.MakePipeShellsWithoutPath([";
+
+ for(i =1 ; i <= nbBases; i++) {
+
+ Handle(Standard_Transient) anItem = theBases->Value(i);
+ if(anItem.IsNull())
+ continue;
+
+ Handle(GEOM_Object) anObj = Handle(GEOM_Object)::DownCast(anItem);
+ if(!anObj.IsNull()) {
+ pyDump<< anObj;
+ if(i < nbBases)
+ pyDump<<", ";
+ }
+ }
+
+ pyDump<< "], [";
+
+ for(i =1 ; i <= nbLocs; i++) {
+
+ Handle(Standard_Transient) anItem = theLocations->Value(i);
+ if(anItem.IsNull())
+ continue;
+
+ Handle(GEOM_Object) anObj = Handle(GEOM_Object)::DownCast(anItem);
+ if(!anObj.IsNull()) {
+ pyDump<< anObj;
+ if(i < nbLocs)
+ pyDump<<", ";
+ }
+ }
+
+ pyDump<< "])";
+
+ SetErrorCode(OK);
+ return aPipeDS;
+
+}
+
+
+//=============================================================================
+/*!
+ * MakePipeBiNormalAlongVector
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakePipeBiNormalAlongVector (Handle(GEOM_Object) theBase,
+ Handle(GEOM_Object) thePath,
+ Handle(GEOM_Object) theVec)
+{
+ SetErrorCode(KO);
+
+ if (theBase.IsNull() || thePath.IsNull() || theVec.IsNull()) return NULL;
+
+ //Add a new Pipe object
+ Handle(GEOM_Object) aPipe = GetEngine()->AddObject(GetDocID(), GEOM_PIPE);
+
+ //Add a new Pipe function
+ Handle(GEOM_Function) aFunction =
+ aPipe->AddFunction(GEOMImpl_PipeDriver::GetID(), PIPE_BI_NORMAL_ALONG_VECTOR);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_PipeDriver::GetID()) return NULL;
+
+ GEOMImpl_IPipeBiNormal aCI (aFunction);
+
+ Handle(GEOM_Function) aRefBase = theBase->GetLastFunction();
+ Handle(GEOM_Function) aRefPath = thePath->GetLastFunction();
+ Handle(GEOM_Function) aRefVec = theVec->GetLastFunction();
+
+ if (aRefBase.IsNull() || aRefPath.IsNull() || aRefVec.IsNull()) return NULL;
+
+ aCI.SetBase(aRefBase);
+ aCI.SetPath(aRefPath);
+ aCI.SetVector(aRefVec);
+
+ //Compute the Pipe value
+ try {
+#if OCC_VERSION_LARGE > 0x06010000
+ OCC_CATCH_SIGNALS;
+#endif
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Pipe driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aPipe << " = geompy.MakePipeBiNormalAlongVector("
+ << theBase << ", " << thePath << ", " << theVec << ")";
+
+ SetErrorCode(OK);
+ return aPipe;
+}
