-// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
#include <Standard_Stream.hxx>
//Compute the box value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Box driver failed");
return NULL;
//Compute the Box value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Box driver failed");
return NULL;
//Compute the Face
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Face driver failed");
return NULL;
//Compute the Face
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Face driver failed");
return NULL;
//Compute the Disk value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Disk driver failed");
return NULL;
//Compute the Disk value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Disk driver failed");
return NULL;
//Compute the Disk
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Disk driver failed");
return NULL;
//Compute the Cylinder value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Cylinder driver failed");
return NULL;
return aCylinder;
}
+//=============================================================================
+/*!
+ * MakeCylinderRHA
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeCylinderRHA (double theR, double theH, double theA)
+{
+ SetErrorCode(KO);
+
+ //Add a new Cylinder object
+ Handle(GEOM_Object) aCylinder = GetEngine()->AddObject(GetDocID(), GEOM_CYLINDER);
+
+ //Add a new Cylinder function with R and H parameters
+ Handle(GEOM_Function) aFunction = aCylinder->AddFunction(GEOMImpl_CylinderDriver::GetID(), CYLINDER_R_H_A);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_CylinderDriver::GetID()) return NULL;
+
+ GEOMImpl_ICylinder aCI (aFunction);
+
+ aCI.SetR(theR);
+ aCI.SetH(theH);
+ aCI.SetA(theA);
+
+ //Compute the Cylinder value
+ try {
+ OCC_CATCH_SIGNALS;
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Cylinder driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aCylinder
+ << " = geompy.MakeCylinderRHA(" << theR << ", " << theH << ", " << theA*180./M_PI << "*math.pi/180.)";
+
+ SetErrorCode(OK);
+ return aCylinder;
+}
//=============================================================================
/*!
//Compute the Cylinder value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Cylinder driver failed");
return NULL;
return aCylinder;
}
+//=============================================================================
+/*!
+ * MakeCylinderPntVecRHA
+ */
+//=============================================================================
+Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeCylinderPntVecRHA (Handle(GEOM_Object) thePnt,
+ Handle(GEOM_Object) theVec,
+ double theR, double theH, double theA)
+{
+ SetErrorCode(KO);
+
+ if (thePnt.IsNull() || theVec.IsNull()) return NULL;
+
+ //Add a new Cylinder object
+ Handle(GEOM_Object) aCylinder = GetEngine()->AddObject(GetDocID(), GEOM_CYLINDER);
+
+ //Add a new Cylinder function for creation a cylinder relatively to point and vector
+ Handle(GEOM_Function) aFunction =
+ aCylinder->AddFunction(GEOMImpl_CylinderDriver::GetID(), CYLINDER_PNT_VEC_R_H_A);
+ if (aFunction.IsNull()) return NULL;
+
+ //Check if the function is set correctly
+ if (aFunction->GetDriverGUID() != GEOMImpl_CylinderDriver::GetID()) return NULL;
+
+ GEOMImpl_ICylinder aCI (aFunction);
+
+ Handle(GEOM_Function) aRefPnt = thePnt->GetLastFunction();
+ Handle(GEOM_Function) aRefVec = theVec->GetLastFunction();
+
+ if (aRefPnt.IsNull() || aRefVec.IsNull()) return NULL;
+
+ aCI.SetPoint(aRefPnt);
+ aCI.SetVector(aRefVec);
+ aCI.SetR(theR);
+ aCI.SetH(theH);
+ aCI.SetA(theA);
+
+ //Compute the Cylinder value
+ try {
+ OCC_CATCH_SIGNALS;
+ if (!GetSolver()->ComputeFunction(aFunction)) {
+ SetErrorCode("Cylinder driver failed");
+ return NULL;
+ }
+ }
+ catch (Standard_Failure) {
+ Handle(Standard_Failure) aFail = Standard_Failure::Caught();
+ SetErrorCode(aFail->GetMessageString());
+ return NULL;
+ }
+
+ //Make a Python command
+ GEOM::TPythonDump(aFunction) << aCylinder << " = geompy.MakeCylinderA("
+ << thePnt << ", " << theVec << ", " << theR << ", " << theH << ", " << theA*180./M_PI << "*math.pi/180.)";
+
+ SetErrorCode(OK);
+ return aCylinder;
+}
+
//=============================================================================
/*!
//Compute the Cone value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Cone driver failed");
return NULL;
//Compute the Cone value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Cone driver failed");
return NULL;
//Compute the Sphere value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Sphere driver failed");
return NULL;
//Compute the Sphere value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Sphere driver failed");
return NULL;
//Compute the Torus value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Torus driver failed");
return NULL;
//Compute the Torus value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Torus driver failed");
return NULL;
//Compute the Prism value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
//SetErrorCode("Prism driver failed");
SetErrorCode("Extrusion can not be created, check input data");
//Compute the Prism value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
//SetErrorCode("Prism driver failed");
SetErrorCode("Extrusion can not be created, check input data");
//Compute the Prism value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
//SetErrorCode("Prism driver failed");
SetErrorCode("Extrusion can not be created, check input data");
//Compute the Prism value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
//SetErrorCode("Prism driver failed");
SetErrorCode("Extrusion can not be created, check input data");
//Compute the Prism value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Extrusion can not be created, check input data");
return NULL;
//Compute the Prism value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Extrusion can not be created, check input data");
return NULL;
//Compute the Draft Prism Feature value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Extrusion can not be created, check input data");
return NULL;
//Compute the Pipe value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Pipe driver failed");
return NULL;
//Compute the Revolution value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Revolution driver failed");
return NULL;
//Compute the Revolution value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Revolution driver failed");
return NULL;
* MakeFilling
*/
//=============================================================================
-Handle(GEOM_Object) GEOMImpl_I3DPrimOperations::MakeFilling
- (Handle(GEOM_Object) theShape, int theMinDeg, int theMaxDeg,
- double theTol2D, double theTol3D, int theNbIter,
- int theMethod, bool isApprox)
+Handle(GEOM_Object)
+GEOMImpl_I3DPrimOperations::MakeFilling (std::list< Handle(GEOM_Object)> & theContours,
+ int theMinDeg, int theMaxDeg,
+ double theTol2D, double theTol3D, int theNbIter,
+ int theMethod, bool isApprox)
{
SetErrorCode(KO);
- if (theShape.IsNull()) return NULL;
-
+ Handle(TColStd_HSequenceOfTransient) contours = GEOM_Object::GetLastFunctions( theContours );
+ if ( contours.IsNull() || contours->IsEmpty() ) {
+ SetErrorCode("NULL argument shape");
+ return NULL;
+ }
//Add a new Filling object
Handle(GEOM_Object) aFilling = GetEngine()->AddObject(GetDocID(), GEOM_FILLING);
if (aFunction->GetDriverGUID() != GEOMImpl_FillingDriver::GetID()) return NULL;
GEOMImpl_IFilling aFI (aFunction);
-
- Handle(GEOM_Function) aRefShape = theShape->GetLastFunction();
-
- if (aRefShape.IsNull()) return NULL;
-
- aFI.SetShape(aRefShape);
+ aFI.SetShapes(contours);
aFI.SetMinDeg(theMinDeg);
aFI.SetMaxDeg(theMaxDeg);
aFI.SetTol2D(theTol2D);
//Compute the Solid value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Filling driver failed");
return NULL;
//Make a Python command
GEOM::TPythonDump pd (aFunction);
- pd << aFilling << " = geompy.MakeFilling(" << theShape ;
+ pd << aFilling << " = geompy.MakeFilling(" << theContours ;
if ( theMinDeg != 2 ) pd << ", theMinDeg=" << theMinDeg ;
if ( theMaxDeg != 5 ) pd << ", theMaxDeg=" << theMaxDeg ;
if ( fabs(theTol2D-0.0001) > Precision::Confusion() )
- pd << ", theTol2D=" << theTol2D ;
+ { pd << ", theTol2D=" << theTol2D ; }
if ( fabs(theTol3D-0.0001) > Precision::Confusion() )
- pd << ", theTol3D=" << theTol3D ;
+ { pd << ", theTol3D=" << theTol3D ; }
if ( theNbIter != 0 ) pd << ", theNbIter=" << theNbIter ;
if ( theMethod==1 ) pd << ", theMethod=GEOM.FOM_UseOri";
else if( theMethod==2 ) pd << ", theMethod=GEOM.FOM_AutoCorrect";
- if(isApprox) pd << ", isApprox=" << isApprox ;
+ if ( isApprox ) pd << ", isApprox=" << isApprox ;
pd << ")";
SetErrorCode(OK);
//Compute the ThruSections value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("ThruSections driver failed");
return anObj;
//Compute the Pipe value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Pipe with defferent section driver failed");
return anObj;
//Compute the Pipe value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Pipe with shell sections driver failed");
return anObj;
//Compute the Pipe value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Pipe with shell sections without path driver failed");
return anObj;
//Compute the Pipe value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Pipe driver failed");
return NULL;
//Compute the offset
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("Offset driver failed");
return NULL;
// Compute the Path value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("PipePath driver failed");
return NULL;
// Compute the Path value
try {
-#if OCC_VERSION_LARGE > 0x06010000
OCC_CATCH_SIGNALS;
-#endif
if (!GetSolver()->ComputeFunction(aFunction)) {
SetErrorCode("PipePath driver failed");
return NULL;