-// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
#include <Standard_Stream.hxx>
#include <GEOMImpl_GlueDriver.hxx>
#include <GEOMImpl_ShapeDriver.hxx>
+#include <GEOMUtils.hxx>
+#include <GEOMAlgo_RemoverWebs.hxx>
+
#include <ShHealOper_ShapeProcess.hxx>
#include <ShHealOper_RemoveFace.hxx>
#include <ShHealOper_CloseContour.hxx>
RemoveHoles(&HI, anOriginalShape, aShape);
break;
case SEWING:
- Sew(&HI, anOriginalShape, aShape);
+ Sew(&HI, anOriginalShape, aShape, false);
+ break;
+ case SEWING_NON_MANIFOLD:
+ Sew(&HI, anOriginalShape, aShape, true);
+ break;
+ case REMOVE_INTERNAL_FACES:
+ RemoveInternalFaces(anOriginalShape, aShape);
break;
case DIVIDE_EDGE:
AddPointOnEdge(&HI, anOriginalShape, aShape);
//=======================================================================
Standard_Boolean GEOMImpl_HealingDriver::Sew (GEOMImpl_IHealing* theHI,
const TopoDS_Shape& theOriginalShape,
- TopoDS_Shape& theOutShape) const
+ TopoDS_Shape& theOutShape,
+ Standard_Boolean isAllowNonManifold) const
{
Standard_Real aTol = theHI->GetTolerance();
ShHealOper_Sewing aHealer (theOriginalShape, aTol);
+ // Set non-manifold mode.
+ aHealer.SetNonManifoldMode(isAllowNonManifold);
+
Standard_Boolean aResult = aHealer.Perform();
if (aResult)
return aResult;
}
+//=======================================================================
+//function : RemoveInternalFaces
+//purpose :
+//=======================================================================
+Standard_Boolean GEOMImpl_HealingDriver::RemoveInternalFaces (const TopoDS_Shape& theOriginalShape,
+ TopoDS_Shape& theOutShape) const
+{
+ GEOMAlgo_RemoverWebs aTool;
+ aTool.SetShape(theOriginalShape);
+ aTool.Perform();
+
+ if (aTool.ErrorStatus() == 0) { // OK
+ theOutShape = aTool.Result();
+
+ // as GEOMAlgo_RemoverWebs always produces compound, lets simplify it
+ // for the case, if it contains only one sub-shape
+ TopTools_ListOfShape listShapeRes;
+ GEOMUtils::AddSimpleShapes(theOutShape, listShapeRes);
+ if (listShapeRes.Extent() == 1) {
+ theOutShape = listShapeRes.First();
+ }
+ }
+ else if (aTool.ErrorStatus() == 11) // invalid argument (contains non-solids), do nothing
+ theOutShape = theOriginalShape;
+ else // error
+ StdFail_NotDone::Raise("GEOMAlgo_RemoverWebs failed!");
+
+ return Standard_True;
+}
+
//=======================================================================
//function : AddPointOnEdge
//purpose :
return Standard_False;
}
-//=======================================================================
-//function : GEOMImpl_HealingDriver_Type_
-//purpose :
-//=======================================================================
-Standard_EXPORT Handle_Standard_Type& GEOMImpl_HealingDriver_Type_()
-{
-
- static Handle_Standard_Type aType1 = STANDARD_TYPE(TFunction_Driver);
- if ( aType1.IsNull()) aType1 = STANDARD_TYPE(TFunction_Driver);
- static Handle_Standard_Type aType2 = STANDARD_TYPE(MMgt_TShared);
- if ( aType2.IsNull()) aType2 = STANDARD_TYPE(MMgt_TShared);
- static Handle_Standard_Type aType3 = STANDARD_TYPE(Standard_Transient);
- if ( aType3.IsNull()) aType3 = STANDARD_TYPE(Standard_Transient);
-
-
- static Handle_Standard_Transient _Ancestors[]= {aType1,aType2,aType3,NULL};
- static Handle_Standard_Type _aType = new Standard_Type("GEOMImpl_HealingDriver",
- sizeof(GEOMImpl_HealingDriver),
- 1,
- (Standard_Address)_Ancestors,
- (Standard_Address)NULL);
-
- return _aType;
-}
+//================================================================================
+/*!
+ * \brief Returns a name of creation operation and names and values of creation parameters
+ */
+//================================================================================
-//=======================================================================
-//function : DownCast
-//purpose :
-//=======================================================================
-
-const Handle(GEOMImpl_HealingDriver) Handle(GEOMImpl_HealingDriver)::DownCast(const Handle(Standard_Transient)& AnObject)
+bool GEOMImpl_HealingDriver::
+GetCreationInformation(std::string& theOperationName,
+ std::vector<GEOM_Param>& theParams)
{
- Handle(GEOMImpl_HealingDriver) _anOtherObject;
+ if (Label().IsNull()) return 0;
+ Handle(GEOM_Function) function = GEOM_Function::GetFunction(Label());
- if (!AnObject.IsNull()) {
- if (AnObject->IsKind(STANDARD_TYPE(GEOMImpl_HealingDriver))) {
- _anOtherObject = Handle(GEOMImpl_HealingDriver)((Handle(GEOMImpl_HealingDriver)&)AnObject);
- }
- }
+ GEOMImpl_IHealing aCI( function );
+ Standard_Integer aType = function->GetType();
- return _anOtherObject;
+ switch ( aType ) {
+ case SHAPE_PROCESS:
+ {
+ theOperationName = "SHAPE_PROCESS";
+ AddParam( theParams, "Object", aCI.GetOriginal() );
+ Handle(TColStd_HArray1OfExtendedString) anOperators = aCI.GetOperators();
+ Handle(TColStd_HArray1OfExtendedString) aParams = aCI.GetParameters();
+ Handle(TColStd_HArray1OfExtendedString) aValues = aCI.GetValues();
+ for ( int i = anOperators->Lower(), nb = anOperators->Upper(); i <= nb; ++i )
+ {
+ const TCollection_ExtendedString& op = anOperators->Value(i);
+ AddParam( theParams, "Operation", op );
+ for ( int iP = aParams->Lower(), nbP = aParams->Upper(); iP <= nbP; ++iP )
+ {
+ const TCollection_ExtendedString& par = aParams->Value(i);
+ TCollection_AsciiString parAscii( par );
+ if ( par.Search( op ) == 1 && parAscii.Value( op.Length() + 1 ) == '.' )
+ {
+ GEOM_Param& p = AddParam( theParams, parAscii.ToCString() );
+ if ( iP <= aValues->Upper() )
+ p << aValues->Value( iP );
+ }
+ }
+ }
+ break;
+ }
+ case SUPPRESS_FACES:
+ theOperationName = "SUPPRESS_FACES";
+ AddParam( theParams, "Selected Shape", aCI.GetOriginal() );
+ AddParam( theParams, "Faces to remove", aCI.GetFaces() );
+ break;
+ case CLOSE_CONTOUR:
+ theOperationName = "CLOSE_CONTOUR";
+ AddParam( theParams, "Selected Shape", aCI.GetOriginal() );
+ AddParam( theParams, "Contour to close", aCI.GetWires() );
+ AddParam( theParams, "Close by common vertex", aCI.GetIsCommonVertex() );
+ break;
+ case REMOVE_INT_WIRES:
+ theOperationName = "SUPPRESS_INT_WIRES";
+ AddParam( theParams, "Selected face", aCI.GetOriginal() );
+ AddParam( theParams, "Wires to remove", aCI.GetWires(), "all" );
+ break;
+ case FILL_HOLES:
+ theOperationName = "SUPPERSS_HOLES";
+ AddParam( theParams, "Selected shape", aCI.GetOriginal() );
+ AddParam( theParams, "Wires to remove", aCI.GetWires(), "all" );
+ break;
+ case SEWING:
+ case SEWING_NON_MANIFOLD:
+ theOperationName = "SEWING";
+ AddParam( theParams, "Selected shape", aCI.GetOriginal() );
+ AddParam( theParams, "Allow Non Manifold", ( aType == SEWING_NON_MANIFOLD ));
+ AddParam( theParams, "Tolerance", aCI.GetTolerance() );
+ break;
+ case DIVIDE_EDGE:
+ theOperationName = "POINT_ON_EDGE";
+ if ( aCI.GetIndex() > 0 )
+ AddParam( theParams, "Edge", "#" ) << aCI.GetIndex() << " of " << aCI.GetOriginal();
+ else
+ AddParam( theParams, "Edge", aCI.GetOriginal() );
+ AddParam( theParams, "By parameter", aCI.GetIsByParameter() );
+ AddParam( theParams, "Value", aCI.GetDevideEdgeValue() );
+ break;
+ case CHANGE_ORIENTATION:
+ theOperationName = "CHANGE_ORIENTATION";
+ AddParam( theParams, "Selected shape", aCI.GetOriginal() );
+ break;
+ case LIMIT_TOLERANCE:
+ theOperationName = "LIMIT_TOLERANCE";
+ AddParam( theParams, "Selected shape", aCI.GetOriginal() );
+ AddParam( theParams, "Tolerance", aCI.GetTolerance() );
+ break;
+ case FUSE_COLLINEAR_EDGES:
+ theOperationName = "FUSE_EDGES";
+ AddParam( theParams, "Wire", aCI.GetOriginal() );
+ AddParam( theParams, "Vertexes", aCI.GetShapes() );
+ break;
+ case REMOVE_INTERNAL_FACES:
+ theOperationName = "REMOVE_WEBS";
+ AddParam( theParams, "Selected shape", aCI.GetOriginal() );
+ break;
+ default:
+ return false;
+ }
+
+ return true;
}
+IMPLEMENT_STANDARD_HANDLE (GEOMImpl_HealingDriver,GEOM_BaseDriver);
+
+IMPLEMENT_STANDARD_RTTIEXT (GEOMImpl_HealingDriver,GEOM_BaseDriver);
