#include <Basics_OCCTVersion.hxx>
-#include <ShapeFix_Face.hxx>
-
-#include <BRep_Tool.hxx>
#include <BRepAlgo.hxx>
-#include <BRep_Builder.hxx>
-#include <BRepBuilderAPI_MakeFace.hxx>
#include <BRepBuilderAPI_Copy.hxx>
+#include <BRepBuilderAPI_MakeFace.hxx>
+#include <BRep_Builder.hxx>
+#include <BRep_Tool.hxx>
+#include <BRepOffsetAPI_MakeFilling.hxx>
-#include <TopAbs.hxx>
-#include <TopExp_Explorer.hxx>
-#include <TopoDS.hxx>
-#include <TopoDS_Compound.hxx>
-#include <TopoDS_Edge.hxx>
-#include <TopoDS_Shape.hxx>
-#include <TopoDS_Vertex.hxx>
-
+#include <GeomAPI_PointsToBSpline.hxx>
+#include <GeomAPI_PointsToBSplineSurface.hxx>
+#include <GeomFill_AppSurf.hxx>
+#include <GeomFill_Line.hxx>
+#include <GeomFill_SectionGenerator.hxx>
+#include <Geom_BSplineCurve.hxx>
+#include <Geom_BSplineSurface.hxx>
+#include <Geom_BezierCurve.hxx>
+#include <Geom_Circle.hxx>
#include <Geom_Curve.hxx>
+#include <Geom_Ellipse.hxx>
+#include <Geom_Line.hxx>
#include <Geom_Surface.hxx>
#include <Geom_TrimmedCurve.hxx>
-#include <Geom_Line.hxx>
-#include <Geom_Circle.hxx>
-#include <Geom_Ellipse.hxx>
-#include <Geom_BezierCurve.hxx>
-#include <Geom_BSplineCurve.hxx>
-#include <Geom_BSplineSurface.hxx>
-#include <GeomFill_Line.hxx>
-#include <GeomFill_AppSurf.hxx>
-#include <GeomFill_SectionGenerator.hxx>
-#include <GeomAPI_PointsToBSplineSurface.hxx>
-#include <GeomAPI_PointsToBSpline.hxx>
-#include <TColGeom_SequenceOfCurve.hxx>
+#include <Precision.hxx>
+#include <ShapeFix_Face.hxx>
-#include <TColgp_SequenceOfPnt.hxx>
+#include <TColGeom_SequenceOfCurve.hxx>
#include <TColgp_Array1OfPnt.hxx>
+#include <TColgp_SequenceOfPnt.hxx>
-#include <Precision.hxx>
+#include <TopAbs.hxx>
+#include <TopExp_Explorer.hxx>
+#include <TopTools_SequenceOfShape.hxx>
+#include <TopoDS.hxx>
+#include <TopoDS_Compound.hxx>
+#include <TopoDS_Edge.hxx>
+#include <TopoDS_Face.hxx>
+#include <TopoDS_Shape.hxx>
+#include <TopoDS_Vertex.hxx>
#include <Standard_ConstructionError.hxx>
if (Label().IsNull()) return 0;
Handle(GEOM_Function) aFunction = GEOM_Function::GetFunction(Label());
if (aFunction.IsNull()) return 0;
- if (aFunction->GetType() != BASIC_FILLING) return 0;
-
- GEOMImpl_IFilling IF (aFunction);
- Handle(GEOM_Function) aShapeFunction = IF.GetShape();
- if (aShapeFunction.IsNull()) return 0;
-
TopoDS_Shape aShape;
- BRepBuilderAPI_Copy Copy (aShapeFunction->GetValue());
- if (Copy.IsDone())
- aShape = Copy.Shape();
-
- if (aShape.IsNull() || aShape.ShapeType() != TopAbs_COMPOUND) return 0;
-
- Standard_Integer mindeg = IF.GetMinDeg();
- Standard_Integer maxdeg = IF.GetMaxDeg();
- Standard_Real tol3d = IF.GetTol3D();
- Standard_Boolean isApprox = IF.GetApprox();
+ GEOMImpl_IFilling IF (aFunction);
+ if( aFunction->GetType() == BASIC_FILLING )
+ {
+ GEOMImpl_IFilling IF (aFunction);
+ Standard_Integer mindeg = IF.GetMinDeg();
+ Standard_Integer maxdeg = IF.GetMaxDeg();
+ Standard_Real tol3d = IF.GetTol3D();
+ Standard_Boolean isApprox = IF.GetApprox();
+
+ if (mindeg > maxdeg) {
+ Standard_RangeError::Raise("Minimal degree can not be more than maximal degree");
+ }
- if (mindeg > maxdeg) {
- Standard_RangeError::Raise("Minimal degree can not be more than maximal degree");
- }
+ /* we verify the contents of the shape */
+ TopExp_Explorer Ex;
+ TopoDS_Shape Scurrent;
+ Standard_Real First, Last;
+ Handle(Geom_Curve) C;
+
+ TopoDS_Compound aComp;
+ BRep_Builder B;
+ B.MakeCompound(aComp);
+
+ // input is either a list or compound of contours
+ TopTools_SequenceOfShape contours;
+ Handle(TColStd_HSequenceOfTransient) aShapeFunctions = IF.GetShapes();
+ if ( aShapeFunctions.IsNull() || aShapeFunctions->IsEmpty() ) return 0;
+ for ( int i = 1; i <= aShapeFunctions->Length(); ++i )
+ {
+ Handle(GEOM_Function) fun = Handle(GEOM_Function)::DownCast( aShapeFunctions->Value( i ));
+ if ( fun.IsNull() ) return 0;
+ TopoDS_Shape s = fun->GetValue();
+ if ( s.IsNull() ) return 0;
+ BRepBuilderAPI_Copy Copy (s);
+ if ( Copy.IsDone() )
+ contours.Append( Copy.Shape() );
+ }
- /* we verify the contents of the shape */
- TopExp_Explorer Ex;
- TopoDS_Shape Scurrent;
- Standard_Real First, Last;
- Handle(Geom_Curve) C;
-
- TopoDS_Compound aComp;
- BRep_Builder B;
- B.MakeCompound(aComp);
-
- // 1. Convert argument wires, if any, into BSpline edges
- TopoDS_Iterator It (aShape);
- for (; It.More(); It.Next()) {
- Scurrent = It.Value();
- if (Scurrent.ShapeType() != TopAbs_EDGE) {
- TopoDS_Edge NewEdge;
- if (Scurrent.ShapeType() == TopAbs_WIRE)
- {
- const TopoDS_Wire& CurWire = TopoDS::Wire(Scurrent);
- NewEdge = BRepAlgo::ConcatenateWireC0(CurWire);
- }
- if (NewEdge.IsNull()) {
- Standard_ConstructionError::Raise("The argument compound must contain only edges");
+ // 1. Convert argument wires, if any, into BSpline edges
+ for ( int i = 1; i <= contours.Length(); ++i )
+ {
+ Scurrent = contours.Value( i );
+ if (Scurrent.ShapeType() != TopAbs_EDGE) {
+
+ if (Scurrent.ShapeType() == TopAbs_WIRE)
+ {
+ const TopoDS_Wire& CurWire = TopoDS::Wire(Scurrent);
+ TopoDS_Edge NewEdge = BRepAlgo::ConcatenateWireC0(CurWire);
+ if (NewEdge.IsNull())
+ Standard_ConstructionError::Raise("Failed to join several edges into one");
+ Scurrent = NewEdge;
+ }
+ else if (Scurrent.ShapeType() == TopAbs_COMPOUND)
+ {
+ for ( TopoDS_Iterator It( Scurrent ); It.More(); It.Next() )
+ contours.Append( It.Value() );
+ continue;
+ }
+ else
+ {
+ Standard_ConstructionError::Raise("Input must contain only edges or/and wires");
+ }
}
- Scurrent = NewEdge;
+ B.Add(aComp,Scurrent);
}
- B.Add(aComp,Scurrent);
- }
- aShape = aComp;
-
- // 2. The surface construction
- if (!isApprox) {
- // make filling as in old version of SALOME (before 4.1.1)
-
- Standard_Real tol2d = IF.GetTol2D();
- Standard_Integer nbiter = IF.GetNbIter();
- Standard_Integer aMethod = IF.GetMethod();
-
- GeomFill_SectionGenerator Section;
- Standard_Integer i = 0;
- Handle(Geom_Curve) aLastC;
- gp_Pnt PL1,PL2;
- for (Ex.Init(aShape, TopAbs_EDGE); Ex.More(); Ex.Next()) {
- Scurrent = Ex.Current();
- if (Scurrent.IsNull() || Scurrent.ShapeType() != TopAbs_EDGE) return 0;
- if (BRep_Tool::Degenerated(TopoDS::Edge(Scurrent))) continue;
- C = BRep_Tool::Curve(TopoDS::Edge(Scurrent), First, Last);
- //if (Scurrent.Orientation() == TopAbs_REVERSED)
- // // Mantis isuue 0020659: consider the orientation of the edges
- // C = new Geom_TrimmedCurve(C, Last, First);
- //else
- // C = new Geom_TrimmedCurve(C, First, Last);
- C = new Geom_TrimmedCurve(C, First, Last);
- gp_Pnt P1,P2;
- C->D0(First,P1);
- C->D0(Last,P2);
-
- if (aMethod == 1 && Scurrent.Orientation() == TopAbs_REVERSED) {
- C->Reverse();
- }
- else if (aMethod == 2) {
- if (i == 0) {
- PL1 = P1;
- PL2 = P2;
+ aShape = aComp;
+
+ // 2. The surface construction
+ if (!isApprox) {
+ // make filling as in old version of SALOME (before 4.1.1)
+
+ Standard_Real tol2d = IF.GetTol2D();
+ Standard_Integer nbiter = IF.GetNbIter();
+ Standard_Integer aMethod = IF.GetMethod();
+
+ GeomFill_SectionGenerator Section;
+ Standard_Integer i = 0;
+ Handle(Geom_Curve) aLastC;
+ gp_Pnt PL1,PL2;
+ for (Ex.Init(aShape, TopAbs_EDGE); Ex.More(); Ex.Next()) {
+ Scurrent = Ex.Current();
+ if (Scurrent.IsNull() || Scurrent.ShapeType() != TopAbs_EDGE) return 0;
+ if (BRep_Tool::Degenerated(TopoDS::Edge(Scurrent))) continue;
+ C = BRep_Tool::Curve(TopoDS::Edge(Scurrent), First, Last);
+ //if (Scurrent.Orientation() == TopAbs_REVERSED)
+ // // Mantis isuue 0020659: consider the orientation of the edges
+ // C = new Geom_TrimmedCurve(C, Last, First);
+ //else
+ // C = new Geom_TrimmedCurve(C, First, Last);
+ C = new Geom_TrimmedCurve(C, First, Last);
+ gp_Pnt P1,P2;
+ C->D0(First,P1);
+ C->D0(Last,P2);
+
+ if (aMethod == 1 && Scurrent.Orientation() == TopAbs_REVERSED) {
+ C->Reverse();
}
- else {
- double d1 = PL1.Distance(P1) + PL2.Distance(P2);
- double d2 = PL1.Distance(P2) + PL2.Distance(P1);
- if (d2 < d1) {
- C->Reverse();
- PL1 = P2;
- PL2 = P1;
- }
- else {
+ else if (aMethod == 2) {
+ if (i == 0) {
PL1 = P1;
PL2 = P2;
}
+ else {
+ double d1 = PL1.Distance(P1) + PL2.Distance(P2);
+ double d2 = PL1.Distance(P2) + PL2.Distance(P1);
+ if (d2 < d1) {
+ C->Reverse();
+ PL1 = P2;
+ PL2 = P1;
+ }
+ else {
+ PL1 = P1;
+ PL2 = P2;
+ }
+ }
}
+
+ Section.AddCurve(C);
+ i++;
}
- Section.AddCurve(C);
- i++;
- }
+ /* a 'tolerance' is used to compare 2 knots : see GeomFill_Generator.cdl */
+ Section.Perform(Precision::PConfusion());
+ Handle(GeomFill_Line) Line = new GeomFill_Line(i);
- /* a 'tolerance' is used to compare 2 knots : see GeomFill_Generator.cdl */
- Section.Perform(Precision::Confusion());
- Handle(GeomFill_Line) Line = new GeomFill_Line(i);
-
- GeomFill_AppSurf App (mindeg, maxdeg, tol3d, tol2d, nbiter); /* user parameters */
- App.Perform(Line, Section);
-
- if (!App.IsDone()) return 0;
- Standard_Integer UDegree, VDegree, NbUPoles, NbVPoles, NbUKnots, NbVKnots;
- App.SurfShape(UDegree, VDegree, NbUPoles, NbVPoles, NbUKnots, NbVKnots);
- Handle(Geom_BSplineSurface) GBS = new Geom_BSplineSurface
- (App.SurfPoles(), App.SurfWeights(), App.SurfUKnots(), App.SurfVKnots(),
- App.SurfUMults(), App.SurfVMults(), App.UDegree(), App.VDegree());
-
- if (GBS.IsNull()) return 0;
-#if OCC_VERSION_LARGE > 0x06050100 // for OCC-6.5.2 and higher version
- aShape = BRepBuilderAPI_MakeFace(GBS, Precision::Confusion());
-#else
- aShape = BRepBuilderAPI_MakeFace(GBS);
-#endif
- }
- else {
- // implemented by skl 20.03.2008 for bug 16568
- // make approximation - try to create bspline surface
- // using GeomAPI_PointsToBSplineSurface
-
- TColGeom_SequenceOfCurve aSeq;
- int MaxNbPoles = 0;
-
- // add curves from edges to sequence and find maximal
- // number of poles if some of them are bsplines
- for (Ex.Init(aShape, TopAbs_EDGE); Ex.More(); Ex.Next()) {
- Scurrent = Ex.Current();
- if (Scurrent.IsNull() || Scurrent.ShapeType() != TopAbs_EDGE) return 0;
- if (BRep_Tool::Degenerated(TopoDS::Edge(Scurrent))) continue;
- C = BRep_Tool::Curve(TopoDS::Edge(Scurrent), First, Last);
- Handle(Geom_TrimmedCurve) TC = Handle(Geom_TrimmedCurve)::DownCast(C);
- if (TC.IsNull()) {
- Handle(Geom_BSplineCurve) BC = Handle(Geom_BSplineCurve)::DownCast(C);
- if (!BC.IsNull()) {
- MaxNbPoles = Max(MaxNbPoles,BC->NbPoles());
+ GeomFill_AppSurf App (mindeg, maxdeg, tol3d, tol2d, nbiter); /* user parameters */
+ App.Perform(Line, Section);
+
+ if (!App.IsDone()) return 0;
+ Standard_Integer UDegree, VDegree, NbUPoles, NbVPoles, NbUKnots, NbVKnots;
+ App.SurfShape(UDegree, VDegree, NbUPoles, NbVPoles, NbUKnots, NbVKnots);
+ Handle(Geom_BSplineSurface) GBS = new Geom_BSplineSurface
+ (App.SurfPoles(), App.SurfWeights(), App.SurfUKnots(), App.SurfVKnots(),
+ App.SurfUMults(), App.SurfVMults(), App.UDegree(), App.VDegree());
+
+ if (GBS.IsNull()) return 0;
+ aShape = BRepBuilderAPI_MakeFace(GBS, Precision::Confusion());
+ }
+ else {
+ // implemented by skl 20.03.2008 for bug 16568
+ // make approximation - try to create bspline surface
+ // using GeomAPI_PointsToBSplineSurface
+
+ TColGeom_SequenceOfCurve aSeq;
+ int MaxNbPoles = 0;
+
+ // add curves from edges to sequence and find maximal
+ // number of poles if some of them are bsplines
+ for (Ex.Init(aShape, TopAbs_EDGE); Ex.More(); Ex.Next()) {
+ Scurrent = Ex.Current();
+ if (Scurrent.IsNull() || Scurrent.ShapeType() != TopAbs_EDGE) return 0;
+ if (BRep_Tool::Degenerated(TopoDS::Edge(Scurrent))) continue;
+ C = BRep_Tool::Curve(TopoDS::Edge(Scurrent), First, Last);
+ Handle(Geom_TrimmedCurve) TC = Handle(Geom_TrimmedCurve)::DownCast(C);
+ if (TC.IsNull()) {
+ Handle(Geom_BSplineCurve) BC = Handle(Geom_BSplineCurve)::DownCast(C);
+ if (!BC.IsNull()) {
+ MaxNbPoles = Max(MaxNbPoles,BC->NbPoles());
+ }
}
- }
- else {
- Handle(Geom_BSplineCurve) BC = Handle(Geom_BSplineCurve)::DownCast(TC->BasisCurve());
- if (BC.IsNull()) {
- Handle(Geom_TrimmedCurve) TC1 = Handle(Geom_TrimmedCurve)::DownCast(TC->BasisCurve());
- if (!TC1.IsNull()) {
- BC = Handle(Geom_BSplineCurve)::DownCast(TC1->BasisCurve());
+ else {
+ Handle(Geom_BSplineCurve) BC = Handle(Geom_BSplineCurve)::DownCast(TC->BasisCurve());
+ if (BC.IsNull()) {
+ Handle(Geom_TrimmedCurve) TC1 = Handle(Geom_TrimmedCurve)::DownCast(TC->BasisCurve());
+ if (!TC1.IsNull()) {
+ BC = Handle(Geom_BSplineCurve)::DownCast(TC1->BasisCurve());
+ }
+ }
+ if (!BC.IsNull()) {
+ MaxNbPoles = Max(MaxNbPoles,BC->NbPoles());
}
}
- if (!BC.IsNull()) {
- MaxNbPoles = Max(MaxNbPoles,BC->NbPoles());
+ aSeq.Append(C);
+ }
+ // prepare array of points for creation bspline surface
+ // size of this array: by U parameter - number of curves,
+ // by V parameter - determ using MaxNbPoles but it's
+ // value must be between 21(min) and 101(max)
+ int nbc = aSeq.Length();
+ int nbp = Max(21, 2*MaxNbPoles-1);
+
+ // commented for Mantis issue 0021541
+ //if (nbp > 101) nbp = 101;
+
+ TColgp_Array2OfPnt Points (1, nbc, 1, nbp);
+ int ic = 1;
+ for (; ic <= nbc; ic++) {
+ Handle(Geom_Curve) C = aSeq.Value(ic);
+ double fp = C->FirstParameter();
+ double lp = C->LastParameter();
+ double dp = (lp-fp)/(nbp-1);
+ int j = 0;
+ gp_Pnt P;
+ for (; j < nbp; j++) {
+ C->D0(fp+dp*j, P);
+ Points.SetValue(ic, j+1, P);
+ }
+ }
+ GeomAPI_PointsToBSplineSurface PTB (Points, mindeg, maxdeg, GeomAbs_C2, tol3d);
+ Handle(Geom_BSplineSurface) BS = PTB.Surface();
+ BRepBuilderAPI_MakeFace BB (BS, Precision::Confusion());
+ TopoDS_Face NewF = BB.Face();
+ Handle(ShapeFix_Face) sff = new ShapeFix_Face (NewF);
+ sff->Perform();
+ sff->FixOrientation();
+ aShape = sff->Face();
+ }
+ }
+ else if( aFunction->GetType() == FILLING_ON_CONSTRAINTS )
+ {
+ BRepOffsetAPI_MakeFilling MakeFilling;
+
+ Handle(TColStd_HSequenceOfTransient) aConstraints = IF.GetShapes();
+
+ for ( unsigned int ind = 1; ind <= aConstraints->Length(); ind++ ) {
+ TopoDS_Edge E;
+ TopoDS_Face F;
+ Handle(GEOM_Function) aRefShape = Handle(GEOM_Function)::DownCast( aConstraints->Value(ind) );
+ if ( !aRefShape->GetValue().IsNull() && aRefShape->GetValue().ShapeType() == TopAbs_EDGE )
+ E = TopoDS::Edge(aRefShape->GetValue() );
+ else {
+ Standard_RangeError::Raise("Wrong parameters");
+ }
+ if ( ind < aConstraints->Length() ) {
+ Handle(GEOM_Function) aRefFaceShape = Handle(GEOM_Function)::DownCast( aConstraints->Value(ind+1) );
+ if ( !aRefFaceShape->GetValue().IsNull() && aRefFaceShape->GetValue().ShapeType() == TopAbs_FACE ) {
+ F = TopoDS::Face( aRefFaceShape->GetValue() );
+ ind++;
}
}
- aSeq.Append(C);
+ if ( !F.IsNull() )
+ MakeFilling.Add( E, F, GeomAbs_G1 );
+ else
+ MakeFilling.Add( E, GeomAbs_C0 );
}
- // prepare array of points for creation bspline surface
- // size of this array: by U parameter - number of curves,
- // by V parameter - determ using MaxNbPoles but it's
- // value must be between 21(min) and 101(max)
- int nbc = aSeq.Length();
- int nbp = Max(21, 2*MaxNbPoles-1);
-
- // commented for Mantis issue 0021541
- //if (nbp > 101) nbp = 101;
-
- TColgp_Array2OfPnt Points (1, nbc, 1, nbp);
- int ic = 1;
- for (; ic <= nbc; ic++) {
- Handle(Geom_Curve) C = aSeq.Value(ic);
- double fp = C->FirstParameter();
- double lp = C->LastParameter();
- double dp = (lp-fp)/(nbp-1);
- int j = 0;
- gp_Pnt P;
- for (; j < nbp; j++) {
- C->D0(fp+dp*j, P);
- Points.SetValue(ic, j+1, P);
- }
+
+ MakeFilling.Build();
+ if ( !MakeFilling.IsDone() )
+ {
+ Standard_RangeError::Raise("Filling on constraints failed");
}
- GeomAPI_PointsToBSplineSurface PTB (Points, mindeg, maxdeg, GeomAbs_C2, tol3d);
- Handle(Geom_BSplineSurface) BS = PTB.Surface();
-#if OCC_VERSION_LARGE > 0x06050100 // for OCC-6.5.2 and higher version
- BRepBuilderAPI_MakeFace BB (BS, Precision::Confusion());
-#else
- BRepBuilderAPI_MakeFace BB (BS);
-#endif
- TopoDS_Face NewF = BB.Face();
- Handle(ShapeFix_Face) sff = new ShapeFix_Face (NewF);
- sff->Perform();
- sff->FixOrientation();
- aShape = sff->Face();
+
+ aShape = TopoDS::Face( MakeFilling.Shape() );
}
/* We test the validity of resulting shape */
if (!BRepAlgo::IsValid((aShape))) {
Standard_ConstructionError::Raise("Algorithm has produced an invalid shape result");
- return 0;
}
aFunction->SetValue(aShape);
switch ( aType ) {
case BASIC_FILLING:
{
- AddParam( theParams, "Input compound", aCI.GetShape() );
+ AddParam( theParams, "Input compound", aCI.GetShapes() );
AddParam( theParams, "Method", aCI.GetMethod() );
const char* method[3] =
{ "Standard", "Use edges orientation", "Correct edges orientation" };
AddParam( theParams, "Approximation", aCI.GetApprox() );
break;
}
+ case FILLING_ON_CONSTRAINTS:
+ {
+ theOperationName = "FACE";
+ AddParam( theParams, "Edges/Faces", aCI.GetShapes() );
+ break;
+ }
default:
return false;
}