-#include <Standard_Stream.hxx>
+// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
+//
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
-#include <BRepOffsetAPI_MakeFilling.hxx>
+#include <Standard_Stream.hxx>
#include <GEOMImpl_Block6Explorer.hxx>
+#include <ShHealOper_ShapeProcess.hxx>
+
#include "utilities.h"
+#include <Basics_OCCTVersion.hxx>
+
#include <BRep_Tool.hxx>
#include <BRep_TFace.hxx>
+#include <BRep_Builder.hxx>
+#include <BRepLib.hxx>
+#include <BRepLib_FindSurface.hxx>
#include <BRepTools.hxx>
#include <BRepTools_WireExplorer.hxx>
#include <BRepOffsetAPI_ThruSections.hxx>
+#include <BRepOffsetAPI_MakeFilling.hxx>
+#include <BRepCheck_Analyzer.hxx>
+#include <BRepBuilderAPI_Copy.hxx>
#include <BRepBuilderAPI_MakeEdge.hxx>
#include <BRepBuilderAPI_MakeWire.hxx>
#include <BRepBuilderAPI_MakeFace.hxx>
#include <Geom_TrimmedCurve.hxx>
#include <GeomFill_Generator.hxx>
+#include <gce_MakePln.hxx>
+
#include <Precision.hxx>
#include <gp_Pnt.hxx>
+#include <gp_Pln.hxx>
#include <TColgp_Array1OfPnt.hxx>
#include <StdFail_NotDone.hxx>
#define NBEDGES 12
#define NBVERTS 8
+#define PLANAR_FACE_MAX_TOLERANCE 1e-06
+
static Standard_Integer mod4 (Standard_Integer nb)
{
if (nb <= 0) return nb + 4;
myEdges(edge_id(2, i)) = anEdges2(nb);
}
+ // check the wires closure
+ TopoDS_Wire wire1 = TopoDS::Wire(aWire1);
+ TopoDS_Wire wire2 = TopoDS::Wire(aWire2);
+ TopoDS_Vertex aV1, aV2;
+
+ TopExp::Vertices(wire1, aV1, aV2);
+ if (!aV1.IsNull() && !aV2.IsNull() && aV1.IsSame(aV2))
+ aWire1.Closed(true);
+
+ TopExp::Vertices(wire2, aV1, aV2);
+ if (!aV1.IsNull() && !aV2.IsNull() && aV1.IsSame(aV2))
+ aWire2.Closed(true);
+
// 4. Generate side surface
if (!aWire1.Closed() || !aWire2.Closed()) {
// BRepOffsetAPI_ThruSections is not applicable on not closed wires
//function : MakeFace
//purpose :
//=======================================================================
-void GEOMImpl_Block6Explorer::MakeFace (const TopoDS_Wire& theWire,
- const Standard_Boolean isPlanarWanted,
- TopoDS_Shape& theResult)
+TCollection_AsciiString GEOMImpl_Block6Explorer::MakeFace (const TopoDS_Wire& theWire,
+ const Standard_Boolean isPlanarWanted,
+ TopoDS_Shape& theResult)
+{
+ if (!isPlanarWanted)
+ return MakeAnyFace(theWire, theResult);
+
+ // Try to build a planar face.
+
+ // If required tolerance increase will be
+ // higher than PLANAR_FACE_MAX_TOLERANCE,
+ // we will try to build a non-planar face.
+
+ TCollection_AsciiString aWarning;
+
+ // Workaround for Mantis issue 0020956
+
+ // Count the number of points in the wire.
+ // Collect the first three points.
+ gp_Pnt p1, p2, p3;
+ bool is3Pnts (false);
+ bool p1set(false), p2set(false), p3set(false);
+ BRepTools_WireExplorer wexpl (theWire);
+ for (; wexpl.More(); wexpl.Next()) {
+ if (!p1set) {
+ p1set = true;
+ p1 = BRep_Tool::Pnt(wexpl.CurrentVertex());
+ }
+ else if (!p2set) {
+ p2set = true;
+ p2 = BRep_Tool::Pnt(wexpl.CurrentVertex());
+ }
+ else if (!p3set) {
+ p3set = true;
+ is3Pnts = true;
+ p3 = BRep_Tool::Pnt(wexpl.CurrentVertex());
+ }
+ else {
+ is3Pnts = false;
+ break;
+ }
+ }
+
+ // Construct a plane for the case of three points in the wire.
+ gp_Pln plane;
+ if (is3Pnts) {
+ gce_MakePln mkPln (p1, p2, p3);
+ if (mkPln.IsDone()) {
+ plane = mkPln.Value();
+ }
+ else {
+ is3Pnts = false;
+ }
+ }
+
+ // Construct a face based on the plane (in case of three points in the wire) or
+ // allow MakeFace to build the plane itself (in case of the number of points is greater than 3).
+ if (is3Pnts) {
+ BRepBuilderAPI_MakeFace MK (plane, theWire, isPlanarWanted);
+ if (MK.IsDone()) {
+ theResult = MK.Shape();
+ return aWarning;
+ }
+ }
+ else {
+ BRepBuilderAPI_MakeFace MK (theWire, isPlanarWanted);
+ if (MK.IsDone()) {
+ theResult = MK.Shape();
+ return aWarning;
+ }
+ }
+
+ // try to update wire tolerances to build a planar face
+
+ // Find a deviation
+ Standard_Real aToleranceReached, aTol;
+ BRepLib_FindSurface aFS;
+ aFS.Init(theWire, -1., isPlanarWanted);
+ aToleranceReached = aFS.ToleranceReached();
+ aTol = aFS.Tolerance();
+
+ if (!aFS.Found()) {
+ aFS.Init(theWire, aToleranceReached, isPlanarWanted);
+ if (!aFS.Found()) return aWarning;
+ aToleranceReached = aFS.ToleranceReached();
+ aTol = aFS.Tolerance();
+ }
+ aTol = Max(1.2 * aToleranceReached, aTol);
+
+ // Mantis issue 0021432: EDF GEOM: Faces with huge tolerance can be built in GEOM
+ if (aTol > PLANAR_FACE_MAX_TOLERANCE) {
+ aWarning = MakeAnyFace(theWire, theResult);
+ if (aWarning.IsEmpty() && !theResult.IsNull())
+ aWarning = "MAKE_FACE_TOLERANCE_TOO_BIG";
+ return aWarning;
+ }
+
+ // Copy the wire, bacause it can be updated with very-very big tolerance here
+ BRepBuilderAPI_Copy aMC (theWire);
+ if (!aMC.IsDone()) return aWarning;
+ TopoDS_Wire aWire = TopoDS::Wire(aMC.Shape());
+ // Update tolerances to <aTol>
+ BRep_Builder B;
+ for (TopExp_Explorer expE (aWire, TopAbs_EDGE); expE.More(); expE.Next()) {
+ TopoDS_Edge anE = TopoDS::Edge(expE.Current());
+ B.UpdateEdge(anE, aTol);
+ }
+ for (TopExp_Explorer expV (aWire, TopAbs_VERTEX); expV.More(); expV.Next()) {
+ TopoDS_Vertex aV = TopoDS::Vertex(expV.Current());
+ B.UpdateVertex(aV, aTol);
+ }
+ //BRepLib::UpdateTolerances(aWire);
+ // Build face
+ BRepBuilderAPI_MakeFace MK1 (aWire, isPlanarWanted);
+ if (MK1.IsDone()) {
+ theResult = MK1.Shape();
+ // Mantis issue 0021432: EDF GEOM: Faces with huge tolerance can be built in GEOM
+ //if (aTol > PLANAR_FACE_MAX_TOLERANCE)
+ // aWarning = "MAKE_FACE_TOLERANCE_TOO_BIG";
+ }
+
+ return aWarning;
+}
+
+//=======================================================================
+//function : MakeAnyFace
+//purpose :
+//=======================================================================
+TCollection_AsciiString GEOMImpl_Block6Explorer::MakeAnyFace (const TopoDS_Wire& theWire,
+ TopoDS_Shape& theResult)
{
- // try to build face on plane or on any surface under the edges of the wire
- BRepBuilderAPI_MakeFace MK (theWire, isPlanarWanted);
+ TCollection_AsciiString aWarning;
+
+ // try to build a face on any surface under the edges of the wire
+ BRepBuilderAPI_MakeFace MK (theWire, Standard_False);
if (MK.IsDone()) {
theResult = MK.Shape();
- return;
+ return aWarning;
}
// try to construct filling surface
- if (!isPlanarWanted) {
- BRepOffsetAPI_MakeFilling MF;
+ BRepOffsetAPI_MakeFilling MF;
- Standard_Integer nbEdges = 0;
- BRepTools_WireExplorer aWE (theWire);
- for (; aWE.More(); aWE.Next(), nbEdges++) {
- MF.Add(TopoDS::Edge(aWE.Current()), GeomAbs_C0);
- }
+ Standard_Integer nbEdges = 0;
+ BRepTools_WireExplorer aWE (theWire);
+ for (; aWE.More(); aWE.Next(), nbEdges++) {
+ MF.Add(TopoDS::Edge(aWE.Current()), GeomAbs_C0);
+ }
- MF.Build();
- if (MF.IsDone()) {
- // Result of filling
- TopoDS_Shape aFace = MF.Shape();
+ MF.Build();
+ if (!MF.IsDone()) {
+ aWarning = "BRepOffsetAPI_MakeFilling failed";
+ return aWarning;
+ }
- // Update tolerance
- Standard_Real aTol = MF.G0Error();
+ // Result of filling
+ TopoDS_Shape aFace = MF.Shape();
+
+ // 12.04.2006 for PAL12149 begin
+ Handle(Geom_Surface) aGS = BRep_Tool::Surface(TopoDS::Face(aFace));
+
+// VSR: debug issues 0021568 and 0021550 (15/05/2012) - BEGIN
+// the following block, when enabled, leads to extra vertices generation by partition algorithm
+// in some cases, for example when fillet is made on a PipeTShape
+#if 0
+// VSR: debug issues 0021568 and 0021550 (15/05/2012) - END
+ BRep_Builder BB;
+ TopoDS_Iterator itw(theWire);
+ for (; itw.More(); itw.Next())
+ {
+ const TopoDS_Edge& anEdge = TopoDS::Edge(itw.Value());
+ TopoDS_Edge NewEdge = TopoDS::Edge(MF.Generated(anEdge).First());
+ Standard_Real fpar, lpar;
+ Handle(Geom2d_Curve) NewPCurve = BRep_Tool::CurveOnSurface(NewEdge, TopoDS::Face(aFace), fpar, lpar);
+ TopLoc_Location aLoc;
+ Standard_Real NewTol = BRep_Tool::Tolerance(NewEdge);
+ BB.UpdateEdge(anEdge, NewPCurve, aGS, aLoc, NewTol);
+ }
+#endif
+
+ BRepBuilderAPI_MakeFace MK1 (aGS, theWire);
+ if (MK1.IsDone()) {
+ TopoDS_Shape aFace1 = MK1.Shape();
+
+ BRepCheck_Analyzer ana (aFace1, false);
+ if (!ana.IsValid()) {
+ TopoDS_Shape aFace2;
+ ShHealOper_ShapeProcess aHealer;
+ aHealer.Perform(aFace1, aFace2);
+ if (aHealer.isDone())
+ theResult = aFace2;
+ }
+ }
+ // 12.04.2006 for PAL12149 end
- TColgp_Array1OfPnt aPnts (1,nbEdges); // points of the given wire
- BRepTools_WireExplorer aWE1 (theWire);
- Standard_Integer vi = 1;
- for (; aWE1.More() && vi <= nbEdges; aWE1.Next(), vi++) {
- aPnts(vi) = BRep_Tool::Pnt(TopoDS::Vertex(aWE1.CurrentVertex()));
- }
+ if (theResult.IsNull()) { // try to deal with pure result of filling
+ // Update tolerance
+ Standard_Real aTol = MF.G0Error();
- // Find maximum deviation in vertices
- TopExp_Explorer exp (aFace, TopAbs_VERTEX);
- TopTools_MapOfShape mapShape;
- for (; exp.More(); exp.Next()) {
- if (mapShape.Add(exp.Current())) {
- TopoDS_Vertex aV = TopoDS::Vertex(exp.Current());
- Standard_Real aTolV = BRep_Tool::Tolerance(aV);
- gp_Pnt aP = BRep_Tool::Pnt(aV);
- Standard_Real min_dist = aP.Distance(aPnts(1));
- for (vi = 2; vi <= nbEdges; vi++) {
- min_dist = Min(min_dist, aP.Distance(aPnts(vi)));
- }
- aTol = Max(aTol, aTolV);
- aTol = Max(aTol, min_dist);
+ TColgp_Array1OfPnt aPnts (1,nbEdges); // points of the given wire
+ BRepTools_WireExplorer aWE1 (theWire);
+ Standard_Integer vi = 1;
+ for (; aWE1.More() && vi <= nbEdges; aWE1.Next(), vi++) {
+ aPnts(vi) = BRep_Tool::Pnt(TopoDS::Vertex(aWE1.CurrentVertex()));
+ }
+
+ // Find maximum deviation in vertices
+ TopExp_Explorer exp (aFace, TopAbs_VERTEX);
+ TopTools_MapOfShape mapShape;
+ for (; exp.More(); exp.Next()) {
+ if (mapShape.Add(exp.Current())) {
+ TopoDS_Vertex aV = TopoDS::Vertex(exp.Current());
+ Standard_Real aTolV = BRep_Tool::Tolerance(aV);
+ gp_Pnt aP = BRep_Tool::Pnt(aV);
+ Standard_Real min_dist = aP.Distance(aPnts(1));
+ for (vi = 2; vi <= nbEdges; vi++) {
+ min_dist = Min(min_dist, aP.Distance(aPnts(vi)));
}
+ aTol = Max(aTol, aTolV);
+ aTol = Max(aTol, min_dist);
}
+ }
- if ((*((Handle(BRep_TFace)*)&aFace.TShape()))->Tolerance() < aTol) {
- (*((Handle(BRep_TFace)*)&aFace.TShape()))->Tolerance(aTol);
- }
- theResult = aFace;
+ if ((*((Handle(BRep_TFace)*)&aFace.TShape()))->Tolerance() < aTol) {
+ (*((Handle(BRep_TFace)*)&aFace.TShape()))->Tolerance(aTol);
}
+ theResult = aFace;
}
+
+ return aWarning;
}