-// GEOM GEOMGUI : GUI for Geometry component
+// GEOM GEOMGUI : GUI for Geometry component
//
-// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
+// File : GeometryGUI.cxx
+// Author : Vadim SANDLER, Open CASCADE S.A.S. (vadim.sandler@opencascade.com)
//
-//
-// File : GeometryGUI.cxx
-// Author : Lucien PIGNOLONI
-// Module : GEOM
-// $Header$
#include "GeometryGUI.h"
-
-// SALOME Includes
-#include "Utils_ORB_INIT.hxx"
-#include "Utils_SINGLETON.hxx"
-
-#include "QAD_Desktop.h"
-#include "QAD_Application.h"
-#include "QAD_RightFrame.h"
-#include "QAD_Config.h"
-#include "QAD_Tools.h"
-#include "QAD_MessageBox.h"
-#include "QAD_Resource.h"
-#include "SALOMEGUI_Desktop.h"
-
-#include "OCCViewer_Viewer3d.h"
-#include "OCCViewer_ViewFrame.h"
-#include "OCCViewer_ViewPort3d.h"
-#include "OCCViewer_Prs.h"
-
-#include "VTKViewer_ViewFrame.h"
-#include "VTKViewer_RenderWindowInteractor.h"
-#include "VTKViewer_InteractorStyleSALOME.h"
-#include "VTKViewer_Prs.h"
-#include "SALOME_Actor.h"
-
-#include "SALOME_Selection.h"
-#include "SALOME_ListIteratorOfListIO.hxx"
-#include "GEOM_AISShape.hxx"
+#include "GEOMGUI_OCCSelector.h"
+#include "GEOMGUI_Selection.h"
#include "GEOM_Displayer.h"
-#include "GEOMImpl_Types.hxx"
+#include <SUIT_Desktop.h>
+#include <SUIT_MessageBox.h>
+#include <SUIT_ResourceMgr.h>
+#include <SUIT_Session.h>
+#include <SUIT_ViewManager.h>
+
+#include <OCCViewer_ViewWindow.h>
+#include <OCCViewer_ViewPort3d.h>
+#include <OCCViewer_ViewModel.h>
+#include <OCCViewer_ViewManager.h>
+
+#include <SVTK_ViewWindow.h>
+#include <SVTK_RenderWindowInteractor.h>
+#include <SVTK_InteractorStyle.h>
+#include <SVTK_ViewModel.h>
+
+#include <SalomeApp_Application.h>
+#include <LightApp_SelectionMgr.h>
+#include <LightApp_VTKSelector.h>
+#include <SalomeApp_Study.h>
+#include <LightApp_Preferences.h>
+#include <SALOME_LifeCycleCORBA.hxx>
+#include <SALOME_ListIO.hxx>
// External includes
-#include <qfileinfo.h>
+#include <QAction>
+#include <QFileInfo>
+#include <QString>
+#include <QPainter>
+
#include <Prs3d_Drawer.hxx>
#include <Prs3d_IsoAspect.hxx>
+#include <Aspect_TypeOfMarker.hxx>
#include <OSD_SharedLibrary.hxx>
-#include "utilities.h"
+#include <utilities.h>
#include <vtkCamera.h>
#include <vtkRenderer.h>
-using namespace std;
+using namespace Qt;
extern "C" {
- Standard_EXPORT SALOMEGUI* GetComponentGUI() {
- return GeometryGUI::GetGeomGUI();
+ Standard_EXPORT CAM_Module* createModule() {
+ return new GeometryGUI();
}
}
-//=================================================================================
-// class : CustomItem
-// purpose : Set Font to a text.
-//=================================================================================
-class CustomItem : public QCustomMenuItem
-{
-public:
- CustomItem(const QString& s, const QFont& f) : myString(s), myFont(f) {}
- ~CustomItem() {}
- void paint(QPainter* p, const QColorGroup& cg, bool act, bool /*enabled*/, int x, int y, int w, int h)
- {
- p->save();
- p->fillRect( x, y, w, h, act ? cg.highlight() : cg.mid() );
- p->setPen( act ? cg.highlightedText() : cg.buttonText() );
- p->setFont( myFont );
- p->drawText( x, y, w, h, AlignHCenter | AlignVCenter | ShowPrefix | DontClip | SingleLine, myString );
- p->restore();
- }
- QSize sizeHint()
- {
- return QFontMetrics( myFont ).size( AlignHCenter | AlignVCenter | ShowPrefix | DontClip | SingleLine, myString );
- }
+GEOM::GEOM_Gen_var GeometryGUI::myComponentGeom = GEOM::GEOM_Gen::_nil();
- bool fullSpan() const
- {
- return true;
- }
+GEOM::GEOM_Gen_var GeometryGUI::GetGeomGen()
+{
+ // Bug 12290: exception in Mesh GUI on GEOMBase::GetShape() if Geometry GUI hasn't been loaded
+ if (CORBA::is_nil(myComponentGeom))
+ InitGeomGen();
+ return GeometryGUI::myComponentGeom;
+}
-private:
- QString myString;
- QFont myFont;
-};
+bool GeometryGUI::InitGeomGen()
+{
+ GeometryGUI aGG;
+ if( CORBA::is_nil( myComponentGeom ) ) return false;
+ return true;
+}
//=======================================================================
-// function : GeometryGUI::GetGeomGUI()
-// purpose : Gets the only object of GeometryGUI [ static ]
+// function : ClientSObjectToObject
+// purpose :
//=======================================================================
-GeometryGUI* GeometryGUI::GetGeomGUI()
+CORBA::Object_var GeometryGUI::ClientSObjectToObject (_PTR(SObject) theSObject)
{
- static GeometryGUI myContext;
- return &myContext;
+ _PTR(GenericAttribute) anAttr;
+ CORBA::Object_var anObj;
+ try {
+ std::string aValue = theSObject->GetIOR();
+ if (strcmp(aValue.c_str(), "") != 0) {
+ CORBA::ORB_ptr anORB = SalomeApp_Application::orb();
+ anObj = anORB->string_to_object(aValue.c_str());
+ }
+ } catch(...) {
+ INFOS("ClientSObjectToObject - Unknown exception was occured!!!");
+ }
+ return anObj._retn();
}
//=======================================================================
-// function : GetORB
-// purpose : Returns a reference to ORB [ static ]
+// function : ClientStudyToStudy
+// purpose :
//=======================================================================
-CORBA::ORB_var GeometryGUI::GetORB()
+SALOMEDS::Study_var GeometryGUI::ClientStudyToStudy (_PTR(Study) theStudy)
{
- ORB_INIT& init = *SINGLETON_<ORB_INIT>::Instance();
- return init.orb();
+ SALOME_NamingService *aNamingService = SalomeApp_Application::namingService();
+ CORBA::Object_var aSMObject = aNamingService->Resolve("/myStudyManager");
+ SALOMEDS::StudyManager_var aStudyManager = SALOMEDS::StudyManager::_narrow(aSMObject);
+ int aStudyID = theStudy->StudyId();
+ SALOMEDS::Study_var aDSStudy = aStudyManager->GetStudyByID(aStudyID);
+ return aDSStudy._retn();
}
//=======================================================================
// purpose : Constructor
//=======================================================================
GeometryGUI::GeometryGUI() :
- SALOMEGUI()
+ SalomeApp_Module( "GEOM" )
{
- QAD_Desktop* desktop = QAD_Application::getDesktop();
- Engines::Component_var comp = desktop->getEngine( "FactoryServer", "GEOM" );
+ if ( CORBA::is_nil( myComponentGeom ) )
+ {
+ SALOME_LifeCycleCORBA* ls = new SALOME_LifeCycleCORBA( getApp()->namingService() );
+ Engines::Component_var comp = ls->FindOrLoad_Component( "FactoryServer", "GEOM" );
+ myComponentGeom = GEOM::GEOM_Gen::_narrow( comp );
+ }
- myComponentGeom = GEOM::GEOM_Gen::_narrow( comp );
myState = -1;
myActiveDialogBox = 0;
myFatherior = "";
gp_Pnt origin = gp_Pnt(0., 0., 0.);
gp_Dir direction = gp_Dir(0., 0., 1.);
myWorkingPlane = gp_Ax3(origin, direction);
+
+ myDisplayer = 0;
+ myLocalSelectionMode = GEOM_ALLOBJECTS;
}
//=======================================================================
//=======================================================================
GeometryGUI::~GeometryGUI()
{
+ while (!myOCCSelectors.isEmpty())
+ delete myOCCSelectors.takeFirst();
+
+ while (!myVTKSelectors.isEmpty())
+ delete myVTKSelectors.takeFirst();
}
//=======================================================================
// function : GeometryGUI::getLibrary()
// purpose : get or load GUI library by name [ internal ]
//=======================================================================
-typedef GEOMGUI* (*LibraryGUI)();
+typedef GEOMGUI* (*LibraryGUI)( GeometryGUI* );
GEOMGUI* GeometryGUI::getLibrary( const QString& libraryName )
{
if ( !myGUIMap.contains( libraryName ) ) {
// try to load library if it is not loaded yet
- QCString libs;
- if( ( libs = getenv( "LD_LIBRARY_PATH" ) ) ) {
- QStringList dirList = QStringList::split( ":", libs, false ); // skip empty entries
+ QString libs;
+#ifndef WNT
+ libs = getenv( "LD_LIBRARY_PATH" );
+ if( !libs.isEmpty() ) {
+ QStringList dirList = libs.split( ":", QString::SkipEmptyParts ); // skip empty entries
+#else
+ libs = getenv( "PATH" );
+ if( !libs.isEmpty() ) {
+ QStringList dirList = libs.split( ";", QString::SkipEmptyParts ); // skip empty entries
+#endif
for( int i = dirList.count()-1; i >= 0; i-- ) {
QString dir = dirList[ i ];
- QFileInfo fi( QAD_Tools::addSlash( dirList[ i ] ) + libraryName );
+ QFileInfo fi( Qtx::addSlash( dirList[ i ] ) + libraryName );
if( fi.exists() ) {
- OSD_SharedLibrary aSharedLibrary( (char*)fi.fileName().latin1() );
+ OSD_SharedLibrary aSharedLibrary( fi.fileName().toLatin1().data() );
bool res = aSharedLibrary.DlOpen( OSD_RTLD_LAZY );
if( !res ) {
MESSAGE( "Can't open library : " << aSharedLibrary.DlError() );
}
OSD_Function osdF = aSharedLibrary.DlSymb( "GetLibGUI" );
if ( osdF != NULL ) {
- LibraryGUI func = (GEOMGUI* (*) ())osdF;
- GEOMGUI* libGUI = (*func)();
+ LibraryGUI func = (GEOMGUI* (*) (GeometryGUI*))osdF;
+ GEOMGUI* libGUI = (*func)(this);
if ( libGUI ) {
myGUIMap[ libraryName ] = libGUI;
break; // found and loaded!
gp_Dir DZ = myWorkingPlane.Direction();
gp_Dir DY = myWorkingPlane.YDirection();
- if( QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getTypeView() == VIEW_OCC) {
- OCCViewer_ViewPort* vp = ((OCCViewer_ViewFrame*)QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getViewPort();
- Handle(V3d_View) view3d = ((OCCViewer_ViewPort3d*)vp)->getView();
+ SUIT_ViewWindow* window = application()->desktop()->activeWindow();
+ bool ViewOCC = ( window && window->getViewManager()->getType() == OCCViewer_Viewer::Type() );
+ bool ViewVTK = ( window && window->getViewManager()->getType() == SVTK_Viewer::Type() );
+
+ if( ViewOCC ) {
+ OCCViewer_ViewWindow* vw = dynamic_cast<OCCViewer_ViewWindow*>( window );
+ if ( vw ) {
+ Handle(V3d_View) view3d = vw->getViewPort()->getView();
- view3d->SetProj(DZ.X(), DZ.Y(), DZ.Z());
- view3d->SetUp(DY.X(), DY.Y(), DY.Z());
+ view3d->SetProj(DZ.X(), DZ.Y(), DZ.Z());
+ view3d->SetUp(DY.X(), DY.Y(), DY.Z());
- ((OCCViewer_ViewFrame*)QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getRightFrame()->getViewFrame())->onViewFitAll();
+ vw->onViewFitAll();
+ }
}
- else if( QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getTypeView() == VIEW_VTK) {
- vtkRenderer* myRenderer = ((VTKViewer_ViewFrame*)QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getRenderer();
+ else if( ViewVTK ) {
+ SVTK_ViewWindow* vw = dynamic_cast<SVTK_ViewWindow*>( window );
+ if ( vw ) {
+ vtkCamera* camera = vw->getRenderer()->GetActiveCamera();
- vtkCamera* camera = myRenderer->GetActiveCamera();
- camera->SetPosition(DZ.X(), DZ.Y(), DZ.Z());
- camera->SetViewUp(DY.X(), DY.Y(), DY.Z());
- camera->SetFocalPoint(0,0,0);
+ camera->SetPosition(DZ.X(), DZ.Y(), DZ.Z());
+ camera->SetViewUp(DY.X(), DY.Y(), DY.Z());
+ camera->SetFocalPoint(0,0,0);
- ((OCCViewer_ViewFrame*)QAD_Application::getDesktop()->getActiveStudy()->getActiveStudyFrame()->getRightFrame()->getViewFrame())->onViewFitAll();
+ vw->onFitAll();
+ }
}
-
}
//=======================================================================
//=======================================================================
// function : GeometryGUI::OnGUIEvent()
-// purpose : manage all events on GUI [static]
+// purpose : common slot for all menu/toolbar actions
//=======================================================================
-bool GeometryGUI::OnGUIEvent(int theCommandID, QAD_Desktop* parent)
+void GeometryGUI::OnGUIEvent()
{
- GeometryGUI* geomGUI = GeometryGUI::GetGeomGUI();
+ const QObject* obj = sender();
+ if ( !obj || !obj->inherits( "QAction" ) )
+ return;
+ int id = actionId((QAction*)obj);
+ if ( id != -1 )
+ OnGUIEvent( id );
+}
- // get main menu
- QMenuBar* Mb = parent->getMainMenuBar();
- // check if current viewframe is of OCC type
- bool ViewOCC = parent->getActiveStudy()->getActiveStudyFrame()->getTypeView() == VIEW_OCC;
+//=======================================================================
+// function : GeometryGUI::OnGUIEvent()
+// purpose : manage all events on GUI [static]
+//=======================================================================
+void GeometryGUI::OnGUIEvent( int id )
+{
+ SUIT_Application* anApp = application();
+ if (!anApp) return;
+ SUIT_Desktop* desk = anApp->desktop();
+
+ // check type of the active viewframe
+ SUIT_ViewWindow* window = desk->activeWindow();
+ bool ViewOCC = ( window && window->getViewManager()->getType() == OCCViewer_Viewer::Type() );
+ bool ViewVTK = ( window && window->getViewManager()->getType() == SVTK_Viewer::Type() );
// if current viewframe is not of OCC and not of VTK type - return immediately
- if( !ViewOCC && parent->getActiveStudy()->getActiveStudyFrame()->getTypeView() != VIEW_VTK)
- return false;
-
- // disable non-OCC viewframe menu commands
- //Mb->setItemEnabled( 404, ViewOCC ); // SKETCHER
- Mb->setItemEnabled( 603, ViewOCC ); // SuppressFace
- Mb->setItemEnabled( 604, ViewOCC ); // SuppressHole
- Mb->setItemEnabled( 606, ViewOCC ); // CloseContour
- Mb->setItemEnabled( 607, ViewOCC ); // RemoveInternalWires
- Mb->setItemEnabled( 608, ViewOCC ); // AddPointOnEdge
- //Mb->setItemEnabled( 609, ViewOCC ); // Free boundaries
- Mb->setItemEnabled( 413, ViewOCC ); // Isos Settings
-
- Mb->setItemEnabled( 800, ViewOCC ); // Create Group
- Mb->setItemEnabled( 801, ViewOCC ); // Edit Group
-
- Mb->setItemEnabled(9998, ViewOCC ); // MENU BLOCKS - MULTI-TRANSFORMATION
+ // fix for IPAL8958 - allow some commands to execute even when NO viewer is active (rename for example)
+ bool NotViewerDependentCommand = ( id == 901 || id == 216 || id == 213 );
+ if ( !ViewOCC && !ViewVTK && !NotViewerDependentCommand )
+ return;
+
+ // fix for IPAL9103, point 2
+ if ( CORBA::is_nil( GetGeomGen() ) ) {
+ SUIT_MessageBox::critical( desk, tr( "GEOM_ERROR" ), tr( "GEOM_ERR_GET_ENGINE" ), tr( "GEOM_BUT_OK" ) );
+ return;
+ }
GEOMGUI* library = 0;
// try to get-or-load corresponding GUI library
- if( theCommandID == 111 || // MENU FILE - IMPORT BREP
- theCommandID == 112 || // MENU FILE - IMPORT IGES
- theCommandID == 113 || // MENU FILE - IMPORT STEP
- theCommandID == 121 || // MENU FILE - EXPORT BREP
- theCommandID == 122 || // MENU FILE - EXPORT IGES
- theCommandID == 123 || // MENU FILE - EXPORT STEP
- theCommandID == 31 || // MENU EDIT - COPY
- theCommandID == 33 || // MENU EDIT - DELETE
- theCommandID == 411 || // MENU SETTINGS - ADD IN STUDY
- theCommandID == 412 || // MENU SETTINGS - SHADING COLOR
- theCommandID == 413 || // MENU SETTINGS - ISOS
- theCommandID == 414 || // MENU SETTINGS - STEP VALUE FOR SPIN BOXES
- theCommandID == 5103 || // MENU TOOLS - CHECK GEOMETRY
- theCommandID == 5104 || // MENU TOOLS - LOAD SCRIPT
- theCommandID == 8032 || // POPUP VIEWER - COLOR
- theCommandID == 8033 || // POPUP VIEWER - TRANSPARENCY
- theCommandID == 8034 || // POPUP VIEWER - ISOS
- theCommandID == 804 || // POPUP VIEWER - ADD IN STUDY
- theCommandID == 901 || // OBJECT BROWSER - RENAME
- theCommandID == 9024 ) { // OBJECT BROWSER - OPEN
- library = geomGUI->getLibrary( "libGEOMToolsGUI.so" );
- }
- else if( theCommandID == 211 || // MENU VIEW - WIREFRAME/SHADING
- theCommandID == 212 || // MENU VIEW - DISPLAY ALL
- theCommandID == 213 || // MENU VIEW - DISPLAY ONLY
- theCommandID == 214 || // MENU VIEW - ERASE ALL
- theCommandID == 215 || // MENU VIEW - ERASE
- theCommandID == 216 || // MENU VIEW - DISPLAY
- theCommandID == 80311 || // POPUP VIEWER - WIREFRAME
- theCommandID == 80312 ) { // POPUP VIEWER - SHADING
- library = geomGUI->getLibrary( "libDisplayGUI.so" );
- }
- else if( theCommandID == 4011 || // MENU BASIC - POINT
- theCommandID == 4012 || // MENU BASIC - LINE
- theCommandID == 4013 || // MENU BASIC - CIRCLE
- theCommandID == 4014 || // MENU BASIC - ELLIPSE
- theCommandID == 4015 || // MENU BASIC - ARC
- theCommandID == 4016 || // MENU BASIC - VECTOR
- theCommandID == 4017 || // MENU BASIC - PLANE
- theCommandID == 4018 || // MENU BASIC - WPLANE
- theCommandID == 4019 || // MENU BASIC - CURVE
- theCommandID == 4020 ) { // MENU BASIC - REPAIR
- library = geomGUI->getLibrary( "libBasicGUI.so" );
- }
- else if( theCommandID == 4021 || // MENU PRIMITIVE - BOX
- theCommandID == 4022 || // MENU PRIMITIVE - CYLINDER
- theCommandID == 4023 || // MENU PRIMITIVE - SPHERE
- theCommandID == 4024 || // MENU PRIMITIVE - TORUS
- theCommandID == 4025 ) { // MENU PRIMITIVE - CONE
- library = geomGUI->getLibrary( "libPrimitiveGUI.so" );
- }
- else if( theCommandID == 4031 || // MENU GENERATION - PRISM
- theCommandID == 4032 || // MENU GENERATION - REVOLUTION
- theCommandID == 4033 || // MENU GENERATION - FILLING
- theCommandID == 4034 ) { // MENU GENERATION - PIPE
- library = geomGUI->getLibrary( "libGenerationGUI.so" );
- }
- else if( theCommandID == 404 || // MENU ENTITY - SKETCHER
- theCommandID == 407 ) { // MENU ENTITY - EXPLODE
- library = geomGUI->getLibrary( "libEntityGUI.so" );
- }
- else if( theCommandID == 4081 || // MENU BUILD - EDGE
- theCommandID == 4082 || // MENU BUILD - WIRE
- theCommandID == 4083 || // MENU BUILD - FACE
- theCommandID == 4084 || // MENU BUILD - SHELL
- theCommandID == 4085 || // MENU BUILD - SOLID
- theCommandID == 4086 ) { // MENU BUILD - COMPUND
- library = geomGUI->getLibrary( "libBuildGUI.so" );
- }
- else if( theCommandID == 5011 || // MENU BOOLEAN - FUSE
- theCommandID == 5012 || // MENU BOOLEAN - COMMON
- theCommandID == 5013 || // MENU BOOLEAN - CUT
- theCommandID == 5014 ) { // MENU BOOLEAN - SECTION
- library = geomGUI->getLibrary( "libBooleanGUI.so" );
- }
- else if( theCommandID == 5021 || // MENU TRANSFORMATION - TRANSLATION
- theCommandID == 5022 || // MENU TRANSFORMATION - ROTATION
- theCommandID == 5023 || // MENU TRANSFORMATION - LOCATION
- theCommandID == 5024 || // MENU TRANSFORMATION - MIRROR
- theCommandID == 5025 || // MENU TRANSFORMATION - SCALE
- theCommandID == 5026 || // MENU TRANSFORMATION - OFFSET
- theCommandID == 5027 || // MENU TRANSFORMATION - MULTI-TRANSLATION
- theCommandID == 5028 ) { // MENU TRANSFORMATION - MULTI-ROTATION
- library = geomGUI->getLibrary( "libTransformationGUI.so" );
- }
- else if( theCommandID == 503 || // MENU OPERATION - PARTITION
- theCommandID == 504 || // MENU OPERATION - ARCHIMEDE
- theCommandID == 505 || // MENU OPERATION - FILLET
- theCommandID == 506 || // MENU OPERATION - CHAMFER
- theCommandID == 507 ) { // MENU OPERATION - CLIPPING RANGE
- library = geomGUI->getLibrary( "libOperationGUI.so" );
- }
- else if( theCommandID == 601 || // MENU REPAIR - SEWING
- theCommandID == 603 || // MENU REPAIR - SUPPRESS FACES
- theCommandID == 604 || // MENU REPAIR - SUPPRESS HOLE
- theCommandID == 605 || // MENU REPAIR - SHAPE PROCESSING
- theCommandID == 606 || // MENU REPAIR - CLOSE CONTOUR
- theCommandID == 607 || // MENU REPAIR - REMOVE INTERNAL WIRES
- theCommandID == 608 || // MENU REPAIR - ADD POINT ON EDGE
- theCommandID == 609 || // MENU REPAIR - FREE BOUNDARIES
- theCommandID == 602 ) { // MENU REPAIR - GLUE FACES
- library = geomGUI->getLibrary( "libRepairGUI.so" );
- }
- else if( theCommandID == 701 || // MENU MEASURE - PROPERTIES
- theCommandID == 702 || // MENU MEASURE - CDG
- theCommandID == 703 || // MENU MEASURE - INERTIA
- theCommandID == 7041 || // MENU MEASURE - BOUNDING BOX
- theCommandID == 7042 || // MENU MEASURE - MIN DISTANCE
- theCommandID == 705 || // MENU MEASURE - TOLERANCE
- theCommandID == 706 || // MENU MEASURE - WHATIS
- theCommandID == 707 || // MENU MEASURE - CHECK
- theCommandID == 708 ) { // MENU MEASURE - POINT COORDINATES
- library = geomGUI->getLibrary( "libMeasureGUI.so" );
- }
- else if( theCommandID == 800 || // MENU GROUP - CREATE
- theCommandID == 801 ) { // MENU GROUP - EDIT
- library = geomGUI->getLibrary( "libGroupGUI.so" );
- }
- else if( theCommandID == 9999 || // MENU BLOCKS - HEXAHEDRAL SOLID
- theCommandID == 9998 || // MENU BLOCKS - MULTI-TRANSFORMATION
- theCommandID == 9997 || // MENU BLOCKS - QUADRANGLE FACE
- theCommandID == 9995 ) { // MENU BLOCKS - EXPLODE ON BLOCKS
- library = geomGUI->getLibrary( "libBlocksGUI.so" );
+ if( id == 111 || // MENU FILE - IMPORT BREP
+ id == 112 || // MENU FILE - IMPORT IGES
+ id == 113 || // MENU FILE - IMPORT STEP
+ id == 121 || // MENU FILE - EXPORT BREP
+ id == 122 || // MENU FILE - EXPORT IGES
+ id == 123 || // MENU FILE - EXPORT STEP
+ id == 2171 || // POPUP VIEWER - SELECT ONLY - VERTEX
+ id == 2172 || // POPUP VIEWER - SELECT ONLY - EDGE
+ id == 2173 || // POPUP VIEWER - SELECT ONLY - WIRE
+ id == 2174 || // POPUP VIEWER - SELECT ONLY - FACE
+ id == 2175 || // POPUP VIEWER - SELECT ONLY - SHELL
+ id == 2176 || // POPUP VIEWER - SELECT ONLY - SOLID
+ id == 2177 || // POPUP VIEWER - SELECT ONLY - COMPOUND
+ id == 2178 || // POPUP VIEWER - SELECT ONLY - SELECT ALL
+ id == 31 || // MENU EDIT - COPY
+ id == 33 || // MENU EDIT - DELETE
+ id == 411 || // MENU SETTINGS - ADD IN STUDY
+ id == 412 || // MENU SETTINGS - SHADING COLOR
+ id == 5103 || // MENU TOOLS - CHECK GEOMETRY
+ id == 8032 || // POPUP VIEWER - COLOR
+ id == 8033 || // POPUP VIEWER - TRANSPARENCY
+ id == 8034 || // POPUP VIEWER - ISOS
+ id == 8035 || // POPUP VIEWER - AUTO COLOR
+ id == 8036 || // POPUP VIEWER - DISABLE AUTO COLOR
+ id == 804 || // POPUP VIEWER - ADD IN STUDY
+ id == 901 || // OBJECT BROWSER - RENAME
+ id == 9024 ) { // OBJECT BROWSER - OPEN
+ //cout << "id " << id << " received" << endl;
+#ifndef WNT
+ library = getLibrary( "libGEOMToolsGUI.so" );
+#else
+ library = getLibrary( "GEOMToolsGUI.dll" );
+#endif
}
-
- // call method of corresponding GUI library
- if ( library ) {
- return library->OnGUIEvent( theCommandID, parent );
+ else if( id == 211 || // MENU VIEW - WIREFRAME/SHADING
+ id == 212 || // MENU VIEW - DISPLAY ALL
+ id == 213 || // MENU VIEW - DISPLAY ONLY
+ id == 214 || // MENU VIEW - ERASE ALL
+ id == 215 || // MENU VIEW - ERASE
+ id == 216 || // MENU VIEW - DISPLAY
+ id == 80311 || // POPUP VIEWER - WIREFRAME
+ id == 80312 ) { // POPUP VIEWER - SHADING
+#ifndef WNT
+ library = getLibrary( "libDisplayGUI.so" );
+#else
+ library = getLibrary( "DisplayGUI.dll" );
+#endif
+ }
+ else if( id == 4011 || // MENU BASIC - POINT
+ id == 4012 || // MENU BASIC - LINE
+ id == 4013 || // MENU BASIC - CIRCLE
+ id == 4014 || // MENU BASIC - ELLIPSE
+ id == 4015 || // MENU BASIC - ARC
+ id == 4016 || // MENU BASIC - VECTOR
+ id == 4017 || // MENU BASIC - PLANE
+ id == 4018 || // MENU BASIC - WPLANE
+ id == 4019 || // MENU BASIC - CURVE
+ id == 4020 ) { // MENU BASIC - REPAIR
+#ifndef WNT
+ library = getLibrary( "libBasicGUI.so" );
+#else
+ library = getLibrary( "BasicGUI.dll" );
+#endif
}
- else {
- QAD_MessageBox::error1( parent, tr( "GEOM_ERROR" ), tr( "GEOM_ERR_LIB_NOT_FOUND" ), tr( "GEOM_BUT_OK" ) );
+ else if( id == 4021 || // MENU PRIMITIVE - BOX
+ id == 4022 || // MENU PRIMITIVE - CYLINDER
+ id == 4023 || // MENU PRIMITIVE - SPHERE
+ id == 4024 || // MENU PRIMITIVE - TORUS
+ id == 4025 ) { // MENU PRIMITIVE - CONE
+#ifndef WNT
+ library = getLibrary( "libPrimitiveGUI.so" );
+#else
+ library = getLibrary( "PrimitiveGUI.dll" );
+#endif
}
- return false;
+ else if( id == 4031 || // MENU GENERATION - PRISM
+ id == 4032 || // MENU GENERATION - REVOLUTION
+ id == 4033 || // MENU GENERATION - FILLING
+ id == 4034 ) { // MENU GENERATION - PIPE
+#ifndef WNT
+ library = getLibrary( "libGenerationGUI.so" );
+#else
+ library = getLibrary( "GenerationGUI.dll" );
+#endif
+ }
+ else if( id == 404 || // MENU ENTITY - SKETCHER
+ id == 407 ) { // MENU ENTITY - EXPLODE
+#ifndef WNT
+ library = getLibrary( "libEntityGUI.so" );
+#else
+ library = getLibrary( "EntityGUI.dll" );
+#endif
+ }
+ else if( id == 4081 || // MENU BUILD - EDGE
+ id == 4082 || // MENU BUILD - WIRE
+ id == 4083 || // MENU BUILD - FACE
+ id == 4084 || // MENU BUILD - SHELL
+ id == 4085 || // MENU BUILD - SOLID
+ id == 4086 ) { // MENU BUILD - COMPUND
+#ifndef WNT
+ library = getLibrary( "libBuildGUI.so" );
+#else
+ library = getLibrary( "BuildGUI.dll" );
+#endif
+ }
+ else if( id == 5011 || // MENU BOOLEAN - FUSE
+ id == 5012 || // MENU BOOLEAN - COMMON
+ id == 5013 || // MENU BOOLEAN - CUT
+ id == 5014 ) { // MENU BOOLEAN - SECTION
+#ifndef WNT
+ library = getLibrary( "libBooleanGUI.so" );
+#else
+ library = getLibrary( "BooleanGUI.dll" );
+#endif
+ }
+ else if( id == 5021 || // MENU TRANSFORMATION - TRANSLATION
+ id == 5022 || // MENU TRANSFORMATION - ROTATION
+ id == 5023 || // MENU TRANSFORMATION - LOCATION
+ id == 5024 || // MENU TRANSFORMATION - MIRROR
+ id == 5025 || // MENU TRANSFORMATION - SCALE
+ id == 5026 || // MENU TRANSFORMATION - OFFSET
+ id == 5027 || // MENU TRANSFORMATION - MULTI-TRANSLATION
+ id == 5028 ) { // MENU TRANSFORMATION - MULTI-ROTATION
+#ifndef WNT
+ library = getLibrary( "libTransformationGUI.so" );
+#else
+ library = getLibrary( "TransformationGUI.dll" );
+#endif
+ }
+ else if( id == 503 || // MENU OPERATION - PARTITION
+ id == 504 || // MENU OPERATION - ARCHIMEDE
+ id == 505 || // MENU OPERATION - FILLET
+ id == 506 || // MENU OPERATION - CHAMFER
+ id == 507 ) { // MENU OPERATION - CLIPPING RANGE
+#ifndef WNT
+ library = getLibrary( "libOperationGUI.so" );
+#else
+ library = getLibrary( "OperationGUI.dll" );
+#endif
+ }
+ else if( id == 601 || // MENU REPAIR - SEWING
+ id == 603 || // MENU REPAIR - SUPPRESS FACES
+ id == 604 || // MENU REPAIR - SUPPRESS HOLE
+ id == 605 || // MENU REPAIR - SHAPE PROCESSING
+ id == 606 || // MENU REPAIR - CLOSE CONTOUR
+ id == 607 || // MENU REPAIR - REMOVE INTERNAL WIRES
+ id == 608 || // MENU REPAIR - ADD POINT ON EDGE
+ id == 609 || // MENU MEASURE - FREE BOUNDARIES
+ id == 610 || // MENU MEASURE - FREE FACES
+ id == 611 || // MENU REPAIR - CHANGE ORIENTATION
+ id == 602 || // MENU REPAIR - GLUE FACES
+ id == 612 ) { // MENU REPAIR - REMOVE EXTRA EDGES
+#ifndef WNT
+ library = getLibrary( "libRepairGUI.so" );
+#else
+ library = getLibrary( "RepairGUI.dll" );
+#endif
+ }
+ else if( id == 701 || // MENU MEASURE - PROPERTIES
+ id == 702 || // MENU MEASURE - CDG
+ id == 703 || // MENU MEASURE - INERTIA
+ id == 704 || // MENU MEASURE - NORMALE
+ id == 7041 || // MENU MEASURE - BOUNDING BOX
+ id == 7042 || // MENU MEASURE - MIN DISTANCE
+ id == 7043 || // MENU MEASURE - ANGLE
+ id == 705 || // MENU MEASURE - TOLERANCE
+ id == 706 || // MENU MEASURE - WHATIS
+ id == 707 || // MENU MEASURE - CHECK
+ id == 7072 || // MENU MEASURE - CHECK COMPOUND OF BLOCKS
+ id == 708 ) { // MENU MEASURE - POINT COORDINATES
+#ifndef WNT
+ library = getLibrary( "libMeasureGUI.so" );
+#else
+ library = getLibrary( "MeasureGUI.dll" );
+#endif
+ }
+ else if( id == 800 || // MENU GROUP - CREATE
+ id == 8001 || // POPUP MENU - CREATE GROUP
+ id == 801 ) { // MENU GROUP - EDIT
+#ifndef WNT
+ library = getLibrary( "libGroupGUI.so" );
+#else
+ library = getLibrary( "GroupGUI.dll" );
+#endif
+ }
+ else if( id == 9999 || // MENU BLOCKS - HEXAHEDRAL SOLID
+ id == 9998 || // MENU BLOCKS - MULTI-TRANSFORMATION
+ id == 9997 || // MENU BLOCKS - QUADRANGLE FACE
+ id == 99991 || // MENU BLOCKS - PROPAGATE
+ id == 9995 ) { // MENU BLOCKS - EXPLODE ON BLOCKS
+#ifndef WNT
+ library = getLibrary( "libBlocksGUI.so" );
+#else
+ library = getLibrary( "BlocksGUI.dll" );
+#endif
+ }
+
+ // call method of corresponding GUI library
+ if ( library )
+ library->OnGUIEvent( id, desk );
+ else
+ SUIT_MessageBox::critical( desk, tr( "GEOM_ERROR" ), tr( "GEOM_ERR_LIB_NOT_FOUND" ), tr( "GEOM_BUT_OK" ) );
}
// function : GeometryGUI::OnKeyPress()
// purpose : Called when any key is pressed by user [static]
//=================================================================================
-bool GeometryGUI::OnKeyPress(QKeyEvent* pe, QAD_Desktop* parent, QAD_StudyFrame* studyFrame)
+void GeometryGUI::OnKeyPress( SUIT_ViewWindow* win, QKeyEvent* pe )
{
- GeometryGUI* geomGUI = GeometryGUI::GetGeomGUI();
GUIMap::Iterator it;
bool bOk = true;
- for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it )
- bOk = bOk && it.data()->OnKeyPress( pe, parent, studyFrame );
- return bOk;
+ for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it ) {
+ SUIT_Application* anApp = application();
+ if (!anApp) return;
+ bOk = bOk && it.value()->OnKeyPress( pe, anApp->desktop(), win );
+ }
+// return bOk;
}
// function : GeometryGUI::OnMouseMove()
// purpose : Manages mouse move events [static]
//=================================================================================
-bool GeometryGUI::OnMouseMove(QMouseEvent* pe, QAD_Desktop* parent, QAD_StudyFrame* studyFrame)
+void GeometryGUI::OnMouseMove( SUIT_ViewWindow* win, QMouseEvent* pe )
{
- GeometryGUI* geomGUI = GeometryGUI::GetGeomGUI();
GUIMap::Iterator it;
bool bOk = true;
- for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it )
- bOk = bOk && it.data()->OnMouseMove( pe, parent, studyFrame );
- return bOk;
+ for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it ) {
+ SUIT_Application* anApp = application();
+ if (!anApp) return;
+ bOk = bOk && it.value()->OnMouseMove( pe, anApp->desktop(), win );
+ }
+// return bOk;
}
// function : GeometryGUI::0nMousePress()
// purpose : Manage mouse press events [static]
//=================================================================================
-bool GeometryGUI::OnMousePress(QMouseEvent* pe, QAD_Desktop* parent, QAD_StudyFrame* studyFrame)
+void GeometryGUI::OnMousePress( SUIT_ViewWindow* win, QMouseEvent* pe )
{
- GeometryGUI* geomGUI = GeometryGUI::GetGeomGUI();
GUIMap::Iterator it;
// OnMousePress() should return false if this event should be processed further
// (see OCCViewer_Viewer3d::onMousePress() for explanation)
bool processed = false;
- for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it )
- processed = processed || it.data()->OnMousePress( pe, parent, studyFrame );
- return processed;
+ for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it ) {
+ SUIT_Application* anApp = application();
+ if (!anApp) return;
+ processed = processed || it.value()->OnMousePress( pe, anApp->desktop(), win );
+ }
+// return processed;
}
-static void UpdateVtkSelection(QAD_Desktop* parent)
+/*
+static void UpdateVtkSelection()
{
- if (!parent->getActiveStudy()) return;
-
- QList<QAD_StudyFrame> aFrameList = parent->getActiveStudy()->getStudyFrames();
-
- for (QAD_StudyFrame* aStudyFrame = aFrameList.first(); aStudyFrame; aStudyFrame = aFrameList.next()) {
- if (aStudyFrame->getTypeView() == VIEW_VTK) {
- QAD_ViewFrame* aViewFrame = aStudyFrame->getRightFrame()->getViewFrame();
- VTKViewer_ViewFrame* aVtkViewFrame = dynamic_cast<VTKViewer_ViewFrame*>(aViewFrame);
- if (!aVtkViewFrame) continue;
- VTKViewer_RenderWindowInteractor* anInteractor = aVtkViewFrame->getRWInteractor();
- if (anInteractor) {
+ QPtrList<SUIT_ViewWindow> winList = application()->desktop()->windows();
+ SUIT_ViewWindow* win = 0;
+ for ( win = winList.first(); win; win = winList.next() ) {
+ if ( win->getViewManager()->getTypeView() == VIEW_VTK ) {
+ SVTK_ViewWindow* vw = dynamic_cast<SVTK_ViewWindow*>( window );
+ if ( vw ) {
+ SVTK_RenderWindowInteractor* anInteractor = vw->getRWInteractor();
anInteractor->SetSelectionProp();
anInteractor->SetSelectionTolerance();
- VTKViewer_InteractorStyleSALOME* aStyle = anInteractor->GetInteractorStyleSALOME();
+ SVTK_InteractorStyleSALOME* aStyle = anInteractor->GetInteractorStyleSALOME();
if (aStyle) {
aStyle->setPreselectionProp();
}
// function : GeometryGUI::SetSettings()
// purpose : Called when GEOM module is activated [static]
//=================================================================================
-bool GeometryGUI::SetSettings(QAD_Desktop* parent)
+bool GeometryGUI::SetSettings()
{
- GeometryGUI* geomGUI = GetGeomGUI();
- QMenuBar* Mb = parent->getMainMenuBar();
- QAD_Study* ActiveStudy = parent->getActiveStudy();
-
-
+ QMenuBar* Mb = parent->getMainMenuBar();
+ SUIT_Study* ActiveStudy = application()->activeStudy();
- /* Wireframe or Shading */
+// Wireframe or Shading
int DisplayMode = 0;
- bool ViewOCC = false;
- if ( ActiveStudy->getActiveStudyFrame()->getTypeView() == VIEW_OCC ) {
- OCCViewer_Viewer3d* v3d = ((OCCViewer_ViewFrame*)ActiveStudy->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getViewer();
- Handle(AIS_InteractiveContext) ic = v3d->getAISContext();
- DisplayMode = ic->DisplayMode();
- ViewOCC = true;
+ SUIT_ViewWindow* window = application()->desktop()->activeWindow();
+ bool ViewOCC = ( window && window->getViewManager()->getType() == VIEW_OCC );
+ bool ViewVTK = ( window && window->getViewManager()->getType() == VIEW_VTK );
+ if ( ViewOCC ) {
+ OCCViewer_ViewManager* vm = dynamic_cast<OCCViewer_ViewManager*>( window->getViewManager() );
+ if ( vm ) {
+ Handle(AIS_InteractiveContext) ic = vm->getOCCViewer()->getAISContext();
+ DisplayMode = ic->DisplayMode();
+ }
}
- else if (ActiveStudy->getActiveStudyFrame()->getTypeView() == VIEW_VTK ) {
- VTKViewer_RenderWindowInteractor* myRenderInter = ((VTKViewer_ViewFrame*)ActiveStudy->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getRWInteractor();
- DisplayMode = myRenderInter->GetDisplayMode();
+ else if ( ViewVTK ) {
+ SVTK_ViewWindow* vw = dynamic_cast<SVTK_ViewWindow*>( window );
+ if ( vw ) {
+ SVTK_RenderWindowInteractor* myRenderInter = vw->getRWInteractor();
+ DisplayMode = myRenderInter->GetDisplayMode();
+ }
}
if( DisplayMode == 1 )
+ getApp()->
Mb->changeItem( 211, tr( "GEOM_MEN_WIREFRAME" ) );
else
Mb->changeItem( 211, tr( "GEOM_MEN_SHADING" ) );
- /* Add in Study - !!!ALWAYS TRUE!!! */ /////// VSR : TO BE REMOVED
+ // Add in Study - !!!ALWAYS TRUE!!! /////// VSR : TO BE REMOVED
QString AddInStudy = QAD_CONFIG->getSetting("Geometry:SettingsAddInStudy");
int Settings_AddInStudy;
- /*if(!AddInStudy.isEmpty())
- Settings_AddInStudy = AddInStudy.toInt();
- else
- */
+ // if(!AddInStudy.isEmpty())
+ // Settings_AddInStudy = AddInStudy.toInt();
+ // else
+
Settings_AddInStudy = 1;
Mb->setItemChecked(411, Settings_AddInStudy);
- /* step value */
+ // step value
QString S = QAD_CONFIG->getSetting("Geometry:SettingsGeomStep");
if(S.isEmpty())
QAD_CONFIG->addSetting("Geometry:SettingsGeomStep", "100");
- /* isos */
+ // isos
int count = ActiveStudy->getStudyFramesCount();
for(int i = 0; i < count; i++) {
if(ActiveStudy->getStudyFrame(i)->getTypeView() == VIEW_OCC) {
}
}
- //Mb->setItemEnabled(404, ViewOCC); // SKETCHER
- Mb->setItemEnabled(603, ViewOCC); // SuppressFace
- Mb->setItemEnabled(604, ViewOCC); // SuppressHole
- Mb->setItemEnabled(606, ViewOCC); // CloseContour
- Mb->setItemEnabled(607, ViewOCC); // RemoveInternalWires
- Mb->setItemEnabled(608, ViewOCC); // AddPointOnEdge
-// Mb->setItemEnabled(609, ViewOCC); // Free boundaries
- Mb->setItemEnabled(413, ViewOCC); // Isos Settings
-
- Mb->setItemEnabled( 800, ViewOCC ); // Create Group
- Mb->setItemEnabled( 801, ViewOCC ); // Edit Group
+ setActionsEnabled();
- Mb->setItemEnabled(9998, ViewOCC); // MENU BLOCKS - MULTI-TRANSFORMATION
-
-
// PAL5356: update VTK selection
- ::UpdateVtkSelection(parent);
+ ::UpdateVtkSelection();
bool bOk = true;
GUIMap::Iterator it;
- for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it )
+ for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it )
bOk = bOk && it.data()->SetSettings( parent );
-
- // MZN: Enable/disable "Clipping range" menu item(from GEOM_CLIPPING variable)
+
+ // MZN: Enable/disable "Clipping range" menu item(from GEOM_CLIPPING variable)
if (getenv( "GEOM_CLIPPING" ) == NULL)
{
QMenuItem* mi = Mb->findItem(50);
if (mi && mi->popup())
- mi->popup()->removeItem(507);
- }
-
+ mi->popup()->removeItem(507);
+ }
+
return bOk;
}
+*/
+
+//=======================================================================
+// function : createGeomAction
+// purpose :
+//=======================================================================
+void GeometryGUI::createGeomAction( const int id, const QString& po_id, const QString& icon_id, const int key, const bool toggle )
+{
+ QIcon icon;
+ QWidget* parent = application()->desktop();
+ SUIT_ResourceMgr* resMgr = SUIT_Session::session()->resourceMgr();
+ QPixmap pix;
+ if ( icon_id.length() )
+ pix = resMgr->loadPixmap( "GEOM", tr( icon_id.toLatin1().constData() ) );
+ else
+ pix = resMgr->loadPixmap( "GEOM", tr( (QString( "ICO_" )+po_id).toLatin1().constData() ), false );
+ if ( !pix.isNull() )
+ icon = QIcon( pix );
+
+ QString tooltip = tr( (QString( "TOP_" )+po_id).toLatin1().constData() ),
+ menu = tr( (QString( "MEN_" )+po_id).toLatin1().constData() ),
+ status_bar = tr( (QString( "STB_" )+po_id).toLatin1().constData() );
+
+ createAction( id, tooltip, icon, menu, status_bar, key, parent, toggle, this, SLOT( OnGUIEvent() ) );
+}
+
+
+
+//=======================================================================
+// function : GeometryGUI::initialize()
+// purpose : Called when GEOM module is created
+//=======================================================================
+void GeometryGUI::initialize( CAM_Application* app )
+{
+ SalomeApp_Module::initialize( app );
+
+ // ----- create actions --------------
+
+ createGeomAction( 111, "IMPORT", "", (CTRL + Key_I) );
+ createGeomAction( 121, "EXPORT", "", (CTRL + Key_E) );
+
+ createGeomAction( 33, "DELETE", "", Qt::Key_Delete );
+
+ createGeomAction( 4011, "POINT" );
+ createGeomAction( 4012, "LINE" );
+ createGeomAction( 4013, "CIRCLE" );
+ createGeomAction( 4014, "ELLIPSE" );
+ createGeomAction( 4015, "ARC" );
+ createGeomAction( 4019, "CURVE" );
+ createGeomAction( 4016, "VECTOR" );
+ createGeomAction( 4017, "PLANE" );
+ createGeomAction( 4018, "WORK_PLANE" );
+ createGeomAction( 4020, "LOCAL_CS" );
+
+ createGeomAction( 4021, "BOX" );
+ createGeomAction( 4022, "CYLINDER" );
+ createGeomAction( 4023, "SPHERE" );
+ createGeomAction( 4024, "TORUS" );
+ createGeomAction( 4025, "CONE" );
+
+ createGeomAction( 4031, "EXTRUSION" );
+ createGeomAction( 4032, "REVOLUTION" );
+ createGeomAction( 4033, "FILLING" );
+ createGeomAction( 4034, "PIPE" );
+
+ createGeomAction( 800, "GROUP_CREATE" );
+ createGeomAction( 801, "GROUP_EDIT" );
+
+ createGeomAction( 9997, "Q_FACE" );
+ createGeomAction( 9999, "HEX_SOLID" );
+
+ createGeomAction( 404, "SKETCH" );
+ createGeomAction( 407, "EXPLODE" );
+
+ createGeomAction( 4081, "EDGE" );
+ createGeomAction( 4082, "WIRE" );
+ createGeomAction( 4083, "FACE" );
+ createGeomAction( 4084, "SHELL" );
+ createGeomAction( 4085, "SOLID" );
+ createGeomAction( 4086, "COMPOUND" );
+
+ createGeomAction( 5011, "FUSE" );
+ createGeomAction( 5012, "COMMON" );
+ createGeomAction( 5013, "CUT" );
+ createGeomAction( 5014, "SECTION" );
+
+ createGeomAction( 5021, "TRANSLATION" );
+ createGeomAction( 5022, "ROTATION" );
+ createGeomAction( 5023, "MODIFY_LOCATION" );
+ createGeomAction( 5024, "MIRROR" );
+ createGeomAction( 5025, "SCALE" );
+ createGeomAction( 5026, "OFFSET" );
+ createGeomAction( 5027, "MUL_TRANSLATION" );
+ createGeomAction( 5028, "MUL_ROTATION" );
+
+ createGeomAction( 503, "PARTITION" );
+ createGeomAction( 504, "ARCHIMEDE" );
+ createGeomAction( 505, "FILLET" );
+ createGeomAction( 506, "CHAMFER" );
+ //createGeomAction( 507, "CLIPPING" );
+
+ createGeomAction( 9998, "MUL_TRANSFORM" );
+ createGeomAction( 9995, "EXPLODE_BLOCKS" );
+ createGeomAction( 99991, "PROPAGATE" );
+
+ createGeomAction( 601, "SEWING" );
+ createGeomAction( 602, "GLUE_FACES" );
+ createGeomAction( 603, "SUPPRESS_FACES" );
+ createGeomAction( 604, "SUPPERSS_HOLES" );
+ createGeomAction( 605, "SHAPE_PROCESS" );
+ createGeomAction( 606, "CLOSE_CONTOUR" );
+ createGeomAction( 607, "SUPPRESS_INT_WIRES" );
+ createGeomAction( 608, "POINT_ON_EDGE" );
+ createGeomAction( 609, "CHECK_FREE_BNDS" );
+ createGeomAction( 610, "CHECK_FREE_FACES" );
+ createGeomAction( 611, "CHANGE_ORIENTATION" );
+ createGeomAction( 612, "REMOVE_EXTRA_EDGES" );
+
+ createGeomAction( 708, "POINT_COORDS" );
+ createGeomAction( 701, "BASIC_PROPS" );
+ createGeomAction( 702, "MASS_CENTER" );
+ createGeomAction( 703, "INERTIA" );
+ createGeomAction( 704, "NORMALE" );
+ createGeomAction( 7041, "BND_BOX" );
+ createGeomAction( 7042, "MIN_DIST" );
+ createGeomAction( 7043, "MEASURE_ANGLE" );
+
+ createGeomAction( 705, "TOLERANCE" );
+ createGeomAction( 706, "WHAT_IS" );
+ createGeomAction( 707, "CHECK" );
+ createGeomAction( 7072, "CHECK_COMPOUND" );
+
+#ifdef _DEBUG_ // PAL16821
+ createGeomAction( 5103, "CHECK_GEOMETRY" );
+#endif
+ createGeomAction( 412, "SHADING_COLOR" );
+
+ createGeomAction( 211, "SHADING" );
+ createGeomAction( 212, "DISPLAY_ALL" );
+ createGeomAction( 214, "ERASE_ALL" );
+ createGeomAction( 216, "DISPLAY" );
+ createGeomAction( 2171, "VERTEX_SEL_ONLY" ,"", 0, true );
+ createGeomAction( 2172, "EDGE_SEL_ONLY", "", 0, true );
+ createGeomAction( 2173, "WIRE_SEL_ONLY", "", 0, true );
+ createGeomAction( 2174, "FACE_SEL_ONLY", "", 0, true );
+ createGeomAction( 2175, "SHELL_SEL_ONLY", "", 0, true );
+ createGeomAction( 2176, "SOLID_SEL_ONLY", "", 0, true );
+ createGeomAction( 2177, "COMPOUND_SEL_ONLY", "", 0, true );
+ createGeomAction( 2178, "ALL_SEL_ONLY", "", 0, true );
+ createGeomAction( 213, "DISPLAY_ONLY" );
+ createGeomAction( 215, "ERASE" );
+
+ createGeomAction( 901, "POP_RENAME", "", Qt::Key_F2 );
+ createGeomAction( 80311, "POP_WIREFRAME", "", 0, true );
+ createGeomAction( 80312, "POP_SHADING", "", 0, true );
+ createGeomAction( 8032, "POP_COLOR" );
+ createGeomAction( 8033, "POP_TRANSPARENCY" );
+ createGeomAction( 8034, "POP_ISOS" );
+ createGeomAction( 8035, "POP_AUTO_COLOR" );
+ createGeomAction( 8036, "POP_DISABLE_AUTO_COLOR" );
+ createGeomAction( 8001, "POP_CREATE_GROUP" );
+
+ // make wireframe-shading items to be exclusive (only one at a time is selected)
+ //QActionGroup* dispModeGr = new QActionGroup( this, "", true );
+ //dispModeGr->add( action( 80311 ) );
+ //dispModeGr->add( action( 80312 ) );
+ // ---- create menu --------------------------
+
+ int fileId = createMenu( tr( "MEN_FILE" ), -1, -1 );
+ createMenu( separator(), fileId, 10 );
+ createMenu( 111, fileId, 10 );
+ createMenu( 121, fileId, 10 );
+ createMenu( separator(), fileId, -1 );
+
+ int editId = createMenu( tr( "MEN_EDIT" ), -1, -1 );
+ createMenu( 33, editId, -1 );
+
+ int newEntId = createMenu( tr( "MEN_NEW_ENTITY" ), -1, -1, 10 );
+
+ int basicId = createMenu( tr( "MEN_BASIC" ), newEntId, -1 );
+ createMenu( 4011, basicId, -1 );
+ createMenu( 4012, basicId, -1 );
+ createMenu( 4013, basicId, -1 );
+ createMenu( 4014, basicId, -1 );
+ createMenu( 4015, basicId, -1 );
+ createMenu( 4019, basicId, -1 );
+ createMenu( separator(), basicId, -1 );
+ createMenu( 4016, basicId, -1 );
+ createMenu( 4017, basicId, -1 );
+ createMenu( 4018, basicId, -1 );
+ createMenu( 4020, basicId, -1 );
+
+ int primId = createMenu( tr( "MEN_PRIMITIVES" ), newEntId, -1 );
+ createMenu( 4021, primId, -1 );
+ createMenu( 4022, primId, -1 );
+ createMenu( 4023, primId, -1 );
+ createMenu( 4024, primId, -1 );
+ createMenu( 4025, primId, -1 );
+
+ int genId = createMenu( tr( "MEN_GENERATION" ), newEntId, -1 );
+ createMenu( 4031, genId, -1 );
+ createMenu( 4032, genId, -1 );
+ createMenu( 4033, genId, -1 );
+ createMenu( 4034, genId, -1 );
+ createMenu( separator(), newEntId, -1 );
+
+ int groupId = createMenu( tr( "MEN_GROUP" ), newEntId, -1 );
+ createMenu( 800, groupId, -1 );
+ createMenu( 801, groupId, -1 );
+ createMenu( separator(), newEntId, -1 );
+
+ int blocksId = createMenu( tr( "MEN_BLOCKS" ), newEntId, -1 );
+ createMenu( 9997, blocksId, -1 );
+ createMenu( 9999, blocksId, -1 );
+
+ createMenu( separator(), newEntId, -1 );
+ createMenu( 404, newEntId, -1 );
+ createMenu( separator(), newEntId, -1 );
+ createMenu( 407, newEntId, -1 );
+
+ int buildId = createMenu( tr( "MEN_BUILD" ), newEntId, -1 );
+ createMenu( 4081, buildId, -1 );
+ createMenu( 4082, buildId, -1 );
+ createMenu( 4083, buildId, -1 );
+ createMenu( 4084, buildId, -1 );
+ createMenu( 4085, buildId, -1 );
+ createMenu( 4086, buildId, -1 );
+
+ int operId = createMenu( tr( "MEN_OPERATIONS" ), -1, -1, 10 );
+
+ int boolId = createMenu( tr( "MEN_BOOLEAN" ), operId, -1 );
+ createMenu( 5011, boolId, -1 );
+ createMenu( 5012, boolId, -1 );
+ createMenu( 5013, boolId, -1 );
+ createMenu( 5014, boolId, -1 );
+
+ int transId = createMenu( tr( "MEN_TRANSFORMATION" ), operId, -1 );
+ createMenu( 5021, transId, -1 );
+ createMenu( 5022, transId, -1 );
+ createMenu( 5023, transId, -1 );
+ createMenu( 5024, transId, -1 );
+ createMenu( 5025, transId, -1 );
+ createMenu( 5026, transId, -1 );
+ createMenu( separator(), transId, -1 );
+ createMenu( 5027, transId, -1 );
+ createMenu( 5028, transId, -1 );
+
+ createMenu( 503, operId, -1 );
+ createMenu( 504, operId, -1 );
+ createMenu( separator(), operId, -1 );
+ createMenu( 505, transId, -1 );
+ createMenu( 506, transId, -1 );
+ //createMenu( 507, transId, -1 );
+
+ int blockId = createMenu( tr( "MEN_BLOCKS" ), operId, -1 );
+ createMenu( 9998, blockId, -1 );
+ createMenu( 9995, blockId, -1 );
+ createMenu( 99991, blockId, -1 );
+
+ int repairId = createMenu( tr( "MEN_REPAIR" ), -1, -1, 10 );
+ createMenu( 605, repairId, -1 );
+ createMenu( 603, repairId, -1 );
+ createMenu( 606, repairId, -1 );
+ createMenu( 607, repairId, -1 );
+ createMenu( 604, repairId, -1 );
+ createMenu( 601, repairId, -1 );
+ createMenu( 602, repairId, -1 );
+ createMenu( 608, repairId, -1 );
+ //createMenu( 609, repairId, -1 );
+ //createMenu( 610, repairId, -1 );
+ createMenu( 611, repairId, -1 );
+ createMenu( 612, repairId, -1 );
+
+ int measurId = createMenu( tr( "MEN_MEASURES" ), -1, -1, 10 );
+ createMenu( 708, measurId, -1 );
+ createMenu( 701, measurId, -1 );
+ createMenu( separator(), measurId, -1 );
+ createMenu( 702, measurId, -1 );
+ createMenu( 703, measurId, -1 );
+ createMenu( 704, measurId, -1 );
+ // NPAL16572: move "Check free boundaries" and "Check free faces" from "Repair" to "Measure"
+ createMenu( separator(), measurId, -1 );
+ createMenu( 609, measurId, -1 );
+ createMenu( 610, measurId, -1 );
+ // NPAL16572 END
+ createMenu( separator(), measurId, -1 );
+
+ int dimId = createMenu( tr( "MEN_DIMENSIONS" ), measurId, -1 );
+ createMenu( 7041, dimId, -1 );
+ createMenu( 7042, dimId, -1 );
+ createMenu( 7043, dimId, -1 );
+ createMenu( separator(), measurId, -1 );
+
+ createMenu( 705, measurId, -1 );
+ createMenu( separator(), measurId, -1 );
+ createMenu( 706, measurId, -1 );
+ createMenu( 707, measurId, -1 );
+ createMenu( 7072, measurId, -1 );
+
+#ifdef _DEBUG_ // PAL16821
+ int toolsId = createMenu( tr( "MEN_TOOLS" ), -1, -1, 50 );
+ createMenu( separator(), toolsId, -1 );
+ createMenu( 5103, toolsId, -1 );
+#endif
+ //int prefId = createMenu( tr( "MEN_PREFERENCES" ), -1, -1, 50 );
+ //createMenu( separator(), prefId, -1 );
+ //int geomId = createMenu( tr( "MEN_PREFERENCES_GEOM" ), prefId, -1 );
+ //createMenu( 412, geomId, -1 );
+ //createMenu( separator(), prefId, -1 );
+
+ int viewId = createMenu( tr( "MEN_VIEW" ), -1, -1 );
+ createMenu( separator(), viewId, -1 );
+
+ int dispmodeId = createMenu( tr( "MEN_DISPLAY_MODE" ), viewId, -1 );
+ createMenu( 211, dispmodeId, -1 );
+
+ createMenu( separator(), viewId, -1 );
+ createMenu( 212, viewId, -1 );
+ createMenu( 214, viewId, -1 );
+ createMenu( separator(), viewId, -1 );
+
+/*
+ PAL9111:
+ because of these items are accessible through object browser and viewers
+ we have removed they from main menu
+
+ createMenu( 216, viewId, -1 );
+ createMenu( 213, viewId, -1 );
+ createMenu( 215, viewId, -1 );
+*/
+
+ // ---- create toolbars --------------------------
+
+ int basicTbId = createTool( tr( "TOOL_BASIC" ) );
+ createTool( 4011, basicTbId );
+ createTool( 4012, basicTbId );
+ createTool( 4013, basicTbId );
+ createTool( 4014, basicTbId );
+ createTool( 4015, basicTbId );
+ createTool( 4019, basicTbId );
+ createTool( 4016, basicTbId );
+ createTool( 4017, basicTbId );
+ createTool( 4018, basicTbId );
+ createTool( 4020, basicTbId );
+
+ int primTbId = createTool( tr( "TOOL_PRIMITIVES" ) );
+ createTool( 4021, primTbId );
+ createTool( 4022, primTbId );
+ createTool( 4023, primTbId );
+ createTool( 4024, primTbId );
+ createTool( 4025, primTbId );
+
+ int boolTbId = createTool( tr( "TOOL_BOOLEAN" ) );
+ createTool( 5011, boolTbId );
+ createTool( 5012, boolTbId );
+ createTool( 5013, boolTbId );
+ createTool( 5014, boolTbId );
+
+ int genTbId = createTool( tr( "TOOL_GENERATION" ) );
+ createTool( 4031, genTbId );
+ createTool( 4032, genTbId );
+ createTool( 4033, genTbId );
+ createTool( 4034, genTbId );
+
+ int transTbId = createTool( tr( "TOOL_TRANSFORMATION" ) );
+ createTool( 5021, transTbId );
+ createTool( 5022, transTbId );
+ createTool( 5023, transTbId );
+ createTool( 5024, transTbId );
+ createTool( 5025, transTbId );
+ createTool( 5026, transTbId );
+ createTool( separator(), transTbId );
+ createTool( 5027, transTbId );
+ createTool( 5028, transTbId );
+
+ // ---- create popup menus --------------------------
+
+ QString clientOCCorVTK = "(client='OCCViewer' or client='VTKViewer')";
+ QString clientOCCorVTK_AndSomeVisible = clientOCCorVTK + " and selcount>0 and isVisible";
+
+ QString clientOCCorVTKorOB = "(client='ObjectBrowser' or client='OCCViewer' or client='VTKViewer')";
+ QString clientOCCorVTKorOB_AndSomeVisible = clientOCCorVTKorOB + " and selcount>0 and isVisible";
+
+ QString autoColorPrefix =
+ "(client='ObjectBrowser' or client='OCCViewer') and type='Shape' and selcount=1 and isOCC=true";
+
+ QtxPopupMgr* mgr = popupMgr();
+ mgr->insert( action( 901 ), -1, -1 ); // rename
+ mgr->setRule( action( 901 ), QString("$type in {'Shape' 'Group'} and selcount=1"), QtxPopupMgr::VisibleRule );
+ mgr->insert( action( 33 ), -1, -1 ); // delete
+ mgr->setRule( action( 33 ), QString("$type in {'Shape' 'Group'} and selcount>0"), QtxPopupMgr::VisibleRule );
+ mgr->insert( action( 8001 ), -1, -1 ); // create group
+ mgr->setRule( action( 8001 ), QString("client='ObjectBrowser' and type='Shape' and selcount=1 and isOCC=true"), QtxPopupMgr::VisibleRule );
+ mgr->insert( action( 801 ), -1, -1 ); // edit group
+ mgr->setRule( action( 801 ), QString("client='ObjectBrowser' and type='Group' and selcount=1 and isOCC=true"), QtxPopupMgr::VisibleRule );
+ mgr->insert( separator(), -1, -1 ); // -----------
+ dispmodeId = mgr->insert( tr( "MEN_DISPLAY_MODE" ), -1, -1 ); // display mode menu
+ mgr->insert( action( 80311 ), dispmodeId, -1 ); // wireframe
+ mgr->setRule( action( 80311 ), clientOCCorVTK_AndSomeVisible, QtxPopupMgr::VisibleRule );
+ mgr->setRule( action( 80311 ), clientOCCorVTK + " and displaymode='Wireframe'", QtxPopupMgr::ToggleRule );
+ mgr->insert( action( 80312 ), dispmodeId, -1 ); // shading
+ mgr->setRule( action( 80312 ), clientOCCorVTK_AndSomeVisible, QtxPopupMgr::VisibleRule );
+ mgr->setRule( action( 80312 ), clientOCCorVTK + " and displaymode='Shading'", QtxPopupMgr::ToggleRule );
+ mgr->insert( separator(), -1, -1 ); // -----------
+ mgr->insert( action( 8032 ), -1, -1 ); // color
+ mgr->setRule( action( 8032 ), clientOCCorVTKorOB_AndSomeVisible + " and ($component={'GEOM'})", QtxPopupMgr::VisibleRule );
+ mgr->insert( action( 8033 ), -1, -1 ); // transparency
+ mgr->setRule( action( 8033 ), clientOCCorVTK_AndSomeVisible, QtxPopupMgr::VisibleRule );
+ mgr->insert( action( 8034 ), -1, -1 ); // isos
+ mgr->setRule( action( 8034 ), clientOCCorVTK_AndSomeVisible + " and selcount>0 and isVisible", QtxPopupMgr::VisibleRule );
+ mgr->insert( separator(), -1, -1 ); // -----------
+ mgr->insert( action( 8035 ), -1, -1 ); // auto color
+ mgr->setRule( action( 8035 ), autoColorPrefix + " and isAutoColor=false", QtxPopupMgr::VisibleRule );
+ mgr->insert( action( 8036 ), -1, -1 ); // disable auto color
+ mgr->setRule( action( 8036 ), autoColorPrefix + " and isAutoColor=true", QtxPopupMgr::VisibleRule );
+ mgr->insert( separator(), -1, -1 ); // -----------
+
+
+ QString canDisplay = "($component={'GEOM'}) and (selcount>0) and ({true} in $canBeDisplayed) ",
+ onlyComponent = "((type='Component') and selcount=1)",
+ rule = canDisplay + "and ((($type in {%1}) and( %2 )) or " + onlyComponent + ")",
+ types = "'Shape' 'Group'";
+
+ mgr->insert( action( 216 ), -1, -1 ); // display
+ mgr->setRule( action( 216 ), rule.arg( types ).arg( "not isVisible" ), QtxPopupMgr::VisibleRule );
+
+ mgr->insert( action( 215 ), -1, -1 ); // erase
+ mgr->setRule( action( 215 ), rule.arg( types ).arg( "isVisible" ), QtxPopupMgr::VisibleRule );
+
+ mgr->insert( action( 214 ), -1, -1 ); // erase All
+ mgr->setRule( action( 214 ), clientOCCorVTK, QtxPopupMgr::VisibleRule );
+
+ QString selectOnly = "(client='OCCViewer' or client='VTKViewer') and (selcount=0)";
+
+ int selectolnyId = mgr->insert( tr("MEN_SELECT_ONLY"), -1, -1); //select only menu
+ mgr->insert( action(2171), selectolnyId, -1); //Vertex
+ mgr->setRule(action(2171), selectOnly, QtxPopupMgr::VisibleRule);
+ mgr->setRule(action(2171), selectOnly + " and selectionmode='VERTEX'", QtxPopupMgr::ToggleRule);
+ mgr->insert( action(2172), selectolnyId, -1); //Edge
+ mgr->setRule(action(2172), selectOnly, QtxPopupMgr::VisibleRule);
+ mgr->setRule(action(2172), selectOnly + " and selectionmode='EDGE'", QtxPopupMgr::ToggleRule);
+ mgr->insert( action(2173), selectolnyId, -1); //Wire
+ mgr->setRule(action(2173), selectOnly, QtxPopupMgr::VisibleRule);
+ mgr->setRule(action(2173), selectOnly + " and selectionmode='WIRE'", QtxPopupMgr::ToggleRule);
+ mgr->insert( action(2174), selectolnyId, -1); //Face
+ mgr->setRule(action(2174), selectOnly, QtxPopupMgr::VisibleRule);
+ mgr->setRule(action(2174), selectOnly + " and selectionmode='FACE'", QtxPopupMgr::ToggleRule);
+ mgr->insert( action(2175), selectolnyId, -1); //Shell
+ mgr->setRule(action(2175), selectOnly, QtxPopupMgr::VisibleRule);
+ mgr->setRule(action(2175), selectOnly + " and selectionmode='SHELL'", QtxPopupMgr::ToggleRule);
+ mgr->insert( action(2176), selectolnyId, -1); //Solid
+ mgr->setRule(action(2176), selectOnly, QtxPopupMgr::VisibleRule);
+ mgr->setRule(action(2176), selectOnly + " and selectionmode='SOLID'", QtxPopupMgr::ToggleRule);
+ mgr->insert( action(2177), selectolnyId, -1); //Compound
+ mgr->setRule(action(2177), selectOnly, QtxPopupMgr::VisibleRule);
+ mgr->setRule(action(2177), selectOnly + " and selectionmode='COMPOUND'", QtxPopupMgr::ToggleRule);
+ mgr->insert( separator(), selectolnyId, -1);
+ mgr->insert( action(2178), selectolnyId, -1); //Clear selection filter
+ mgr->setRule(action(2178), selectOnly, QtxPopupMgr::VisibleRule);
+ mgr->setRule(action(2178), selectOnly + " and selectionmode='ALL'", QtxPopupMgr::ToggleRule);
+ mgr->insert( action( 213 ), -1, -1 ); // display only
+ mgr->setRule( action( 213 ), rule.arg( types ).arg( "true" ), QtxPopupMgr::VisibleRule );
+ mgr->insert( separator(), -1, -1 );
+
+ mgr->hide( mgr->actionId( action( myEraseAll ) ) );
+}
//=======================================================================
-// function : GeometryGUI::Deactivate()
-// purpose : Called when GEOM module is deactivated [ static ]
+// function : GeometryGUI::activateModule()
+// purpose : Called when GEOM module is activated
//=======================================================================
-void GeometryGUI::Deactivate()
+bool GeometryGUI::activateModule( SUIT_Study* study )
{
- GeometryGUI* geomGUI = GetGeomGUI();
- GetGeomGUI()->EmitSignalCloseAllDialogs();
+ if ( CORBA::is_nil( myComponentGeom ) )
+ return false;
+
+ bool res = SalomeApp_Module::activateModule( study );
+
+ if ( !res )
+ return false;
+
+ setMenuShown( true );
+ setToolShown( true );
+
+ connect( application()->desktop(), SIGNAL( windowActivated( SUIT_ViewWindow* ) ),
+ this, SLOT( onWindowActivated( SUIT_ViewWindow* ) ) );
+
+ // Reset actions accelerator keys
+ //action(111)->setAccel(QKeySequence(CTRL + Key_I)); // Import
+ //action(121)->setAccel(QKeySequence(CTRL + Key_E)); // Export
+ action(111)->setEnabled(true); // Import
+ action(121)->setEnabled(true); // Export
+
GUIMap::Iterator it;
- for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it )
- it.data()->Deactivate();
+ for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it )
+ it.value()->activate( application()->desktop() );
+
+ LightApp_SelectionMgr* sm = getApp()->selectionMgr();
+ SUIT_ViewManager* vm;
+ ViewManagerList OCCViewManagers, VTKViewManagers;
+
+ application()->viewManagers( OCCViewer_Viewer::Type(), OCCViewManagers );
+ QListIterator<SUIT_ViewManager*> itOCC( OCCViewManagers );
+ while ( itOCC.hasNext() && (vm = itOCC.next()) )
+ myOCCSelectors.append( new GEOMGUI_OCCSelector( ((OCCViewer_ViewManager*)vm)->getOCCViewer(), sm ) );
+
+ application()->viewManagers( SVTK_Viewer::Type(), VTKViewManagers );
+ QListIterator<SUIT_ViewManager*> itVTK( VTKViewManagers );
+ while ( itVTK.hasNext() && (vm = itVTK.next()) )
+ myVTKSelectors.append( new LightApp_VTKSelector( dynamic_cast<SVTK_Viewer*>( vm->getViewModel() ), sm ) );
+
+ // disable OCC selectors
+ //getApp()->selectionMgr()->setEnabled( false, OCCViewer_Viewer::Type() );
+ QListIterator<GEOMGUI_OCCSelector*> itOCCSel( myOCCSelectors );
+ while ( itOCCSel.hasNext() )
+ if ( GEOMGUI_OCCSelector* sr = itOCCSel.next() )
+ sr->setEnabled(true);
+
+ // disable VTK selectors
+ //getApp()->selectionMgr()->setEnabled( false, SVTK_Viewer::Type() );
+ QListIterator<LightApp_VTKSelector*> itVTKSel( myVTKSelectors );
+ while ( itVTKSel.hasNext() )
+ if ( LightApp_VTKSelector* sr = itVTKSel.next() )
+ sr->setEnabled(true);
+
+ return true;
}
-//=================================================================================
-// function : GeometryGUI::DefinePopup()
-// purpose : Called from desktop to define popup menu [static]
-//=================================================================================
-void GeometryGUI::DefinePopup(QString& theContext, QString& theParent, QString& theObject)
+
+//=======================================================================
+// function : GeometryGUI::deactivateModule()
+// purpose : Called when GEOM module is deactivated
+//=======================================================================
+bool GeometryGUI::deactivateModule( SUIT_Study* study )
{
- GeometryGUI* geomGUI = GetGeomGUI();
- QAD_Study* ActiveStudy = QAD_Application::getDesktop()->getActiveStudy();
- SALOME_Selection* Sel = SALOME_Selection::Selection(ActiveStudy->getSelection());
+ setMenuShown( false );
+ setToolShown( false );
- theObject = "";
- theContext = "";
+ disconnect( application()->desktop(), SIGNAL( windowActivated( SUIT_ViewWindow* ) ),
+ this, SLOT( onWindowActivated( SUIT_ViewWindow* ) ) );
- if ( theParent == "Viewer" ) {
- if ( Sel->IObjectCount() == 0 )
- theContext = "NothingSelected";
- }
+ EmitSignalCloseAllDialogs();
- if ( Sel->IObjectCount() == 1 ) {
- Handle(SALOME_InteractiveObject) IO = Sel->firstIObject();
- if( IO->hasEntry() ) {
- SALOMEDS::SObject_var sobj = ActiveStudy->getStudyDocument()->FindObjectID( IO->getEntry() );
- if ( !sobj->_is_nil() ) {
- SALOMEDS::SComponent_var scomp = sobj->GetFatherComponent();
- if ( !strcmp(scomp->GetID(), IO->getEntry() ) ) {
- // component is selected
- theObject = "Component";
- }
- else {
- GEOM::GEOM_Object_var aGObj = GEOM::GEOM_Object::_narrow( sobj->GetObject() );
- if ( !CORBA::is_nil( aGObj ) ) {
- switch( aGObj->GetType() ) {
- case GEOM_GROUP:
- theObject = "Group";
- break;
- default:
- theObject = "Shape";
- break;
- }
- }
- }
- }
- }
+ GUIMap::Iterator it;
+ for ( it = myGUIMap.begin(); it != myGUIMap.end(); ++it )
+ it.value()->deactivate();
+
+ // Unset actions accelerator keys
+ //action(111)->setAccel(QKeySequence()); // Import
+ //action(121)->setAccel(QKeySequence()); // Export
+ action(111)->setEnabled(false); // Import
+ action(121)->setEnabled(false); // Export
+
+ myOCCSelectors.clear();
+ getApp()->selectionMgr()->setEnabled( true, OCCViewer_Viewer::Type() );
+
+ myVTKSelectors.clear();
+ getApp()->selectionMgr()->setEnabled( true, SVTK_Viewer::Type() );
+
+ return SalomeApp_Module::deactivateModule( study );
+}
+
+//=======================================================================
+// function : GeometryGUI::BuildPresentation()
+// purpose :
+//=======================================================================
+void GeometryGUI::BuildPresentation( const Handle(SALOME_InteractiveObject)& io, SUIT_ViewWindow* win )
+{
+ //GEOM_Displayer().Display( io, false, win );
+}
+
+//=======================================================================
+// function : onWindowActivated()
+// purpose : update menu items' status - disable non-OCC-viewer-compatible actions
+//=======================================================================
+void GeometryGUI::onWindowActivated( SUIT_ViewWindow* win )
+{
+ if ( !win )
+ return;
+
+ const bool ViewOCC = ( win->getViewManager()->getType() == OCCViewer_Viewer::Type() );
+ const bool ViewVTK = ( win->getViewManager()->getType() == SVTK_Viewer::Type() );
+
+ // disable non-OCC viewframe menu commands
+// action( 404 )->setEnabled( ViewOCC ); // SKETCHER
+ action( 603 )->setEnabled( ViewOCC ); // SuppressFace
+ action( 604 )->setEnabled( ViewOCC ); // SuppressHole
+ action( 606 )->setEnabled( ViewOCC ); // CloseContour
+ action( 607 )->setEnabled( ViewOCC ); // RemoveInternalWires
+ action( 608 )->setEnabled( ViewOCC ); // AddPointOnEdge
+// action( 609 )->setEnabled( ViewOCC ); // Free boundaries
+// action( 413 )->setEnabled( ViewOCC || ViewVTK ); // Isos Settings
+
+ action( 800 )->setEnabled( ViewOCC ); // Create Group
+ action( 801 )->setEnabled( ViewOCC ); // Edit Group
+
+ action( 9998 )->setEnabled( ViewOCC ); // MENU BLOCKS - MULTI-TRANSFORMATION
+}
+
+void GeometryGUI::windows( QMap<int, int>& mappa ) const
+{
+ mappa.insert( SalomeApp_Application::WT_ObjectBrowser, Qt::LeftDockWidgetArea );
+ mappa.insert( SalomeApp_Application::WT_PyConsole, Qt::BottomDockWidgetArea );
+}
+
+void GeometryGUI::viewManagers( QStringList& lst ) const
+{
+ lst.append( OCCViewer_Viewer::Type() );
+}
+
+void GeometryGUI::onViewManagerAdded( SUIT_ViewManager* vm )
+{
+ if ( vm->getType() == OCCViewer_Viewer::Type() )
+ {
+ qDebug( "connect" );
+ connect( vm, SIGNAL( keyPress ( SUIT_ViewWindow*, QKeyEvent* ) ),
+ this, SLOT( OnKeyPress( SUIT_ViewWindow*, QKeyEvent* ) ) );
+ connect( vm, SIGNAL( mousePress( SUIT_ViewWindow*, QMouseEvent* ) ),
+ this, SLOT( OnMousePress( SUIT_ViewWindow*, QMouseEvent* ) ) );
+ connect( vm, SIGNAL( mouseMove ( SUIT_ViewWindow*, QMouseEvent* ) ),
+ this, SLOT( OnMouseMove( SUIT_ViewWindow*, QMouseEvent* ) ) );
+
+
+ LightApp_SelectionMgr* sm = getApp()->selectionMgr();
+ myOCCSelectors.append( new GEOMGUI_OCCSelector( ((OCCViewer_ViewManager*)vm)->getOCCViewer(), sm ) );
+
+ // disable OCC selectors
+ getApp()->selectionMgr()->setEnabled( false, OCCViewer_Viewer::Type() );
+ QListIterator<GEOMGUI_OCCSelector*> itOCCSel( myOCCSelectors );
+ while ( itOCCSel.hasNext() )
+ if ( GEOMGUI_OCCSelector* sr = itOCCSel.next() )
+ sr->setEnabled(true);
+ }
+ else if ( vm->getType() == SVTK_Viewer::Type() )
+ {
+ LightApp_SelectionMgr* sm = getApp()->selectionMgr();
+ myVTKSelectors.append( new LightApp_VTKSelector( dynamic_cast<SVTK_Viewer*>( vm->getViewModel() ), sm ) );
+
+ // disable VTK selectors
+ getApp()->selectionMgr()->setEnabled( false, SVTK_Viewer::Type() );
+ QListIterator<LightApp_VTKSelector*> itVTKSel( myVTKSelectors );
+ while ( itVTKSel.hasNext() )
+ if ( LightApp_VTKSelector* sr = itVTKSel.next() )
+ sr->setEnabled(true);
}
}
-//=================================================================================
-// function : GeometryGUI::CustomPopup()
-// purpose : Called from desktop to create popup menu [static]
-//=================================================================================
-bool GeometryGUI::CustomPopup(QAD_Desktop* parent, QPopupMenu* popup, const QString& theContext,
- const QString& theParent, const QString& theObject)
-{
- GeometryGUI* geomGUI = GetGeomGUI();
-
- // Deactivate any non modal dialog box to get the neutral point
- geomGUI->EmitSignalDeactivateDialog();
- QAD_Study* anActiveStudy = parent->getActiveStudy();
- QAD_StudyFrame* aStudyFrame = anActiveStudy->getActiveStudyFrame();
- QAD_ViewFrame* aViewFrame = aStudyFrame->getRightFrame()->getViewFrame();
- SALOME_Selection* Sel = SALOME_Selection::Selection(anActiveStudy->getSelection());
- QString parentComponent = ((SALOMEGUI_Desktop*)parent)->getComponentFromSelection();
- bool isOCCViewer = aViewFrame->getTypeView() == VIEW_OCC;
- bool isVTKViewer = aViewFrame->getTypeView() == VIEW_VTK;
- int aDisplayMode = 0;
- QString objectName;
-
- if ( aViewFrame->getTypeView() == VIEW_OCC )
- aDisplayMode = ((OCCViewer_ViewFrame*)aViewFrame)->getViewer()->getAISContext()->DisplayMode();
- else if ( aViewFrame->getTypeView() == VIEW_VTK )
- aDisplayMode = ((VTKViewer_ViewFrame*)aViewFrame)->getRWInteractor()->GetDisplayMode();
-
- int nbSel = Sel->IObjectCount();
-
- if( nbSel == 0 ) {
- ////// NOTHING SELECTED
- popup->clear();
- }
- else if ( nbSel == 1 ) {
- ////// SINGLE OBJECT SELECTION
- if ( parentComponent != parent->getActiveComponent() ) {
- ////// selected object does not belong to GEOM module:
- // remove all commands except Display/Erase...
- while ( 1 ) {
- int id = popup->idAt( 0 );
- if ( id <= QAD_TopLabel_Popup_ID )
- popup->removeItemAt( 0 );
- else
+void GeometryGUI::onViewManagerRemoved( SUIT_ViewManager* vm )
+{
+ SUIT_ViewModel* viewer = vm->getViewModel();
+ if ( vm->getType() == OCCViewer_Viewer::Type() )
+ {
+ QListIterator<GEOMGUI_OCCSelector*> itOCCSel( myOCCSelectors );
+ while ( itOCCSel.hasNext() )
+ if ( GEOMGUI_OCCSelector* sr = itOCCSel.next() )
+ if ( sr->viewer() == viewer )
+ {
+ delete myOCCSelectors.takeAt( myOCCSelectors.indexOf( sr ) );
break;
- }
- }
- else {
- ////// selected object belong to the GEOM module
- // get interactive object
- Handle(SALOME_InteractiveObject) IObject = Sel->firstIObject();
- objectName = IObject->getName();
- // if object has entry get SObject
- SALOMEDS::SObject_var SO;
- if ( IObject->hasEntry() )
- SO = anActiveStudy->getStudyDocument()->FindObjectID( IObject->getEntry() );
-
- if ( theObject == "Component" ) {
- ////// menu for component
- popup->removeItem( QAD_DisplayOnly_Popup_ID );
- if ( !isOCCViewer && !isVTKViewer ) {
- popup->removeItem( QAD_Display_Popup_ID );
- popup->removeItem( QAD_Erase_Popup_ID );
- }
- }
- else {
- ////// not component (should be shape)
- if ( IObject->hasEntry() ) /////// VSR : TO BE REMOVED
- popup->removeItem( 804 ); // "Add in Study"
-
- // Here could be analysis of the geom shape's type
- // ... //
-
- SALOMEDS::GenericAttribute_var aTmpAttr;
- if( SO->_is_nil() || SO->GetFatherComponent()->FindAttribute( aTmpAttr, "AttributeIOR") )
- popup->removeItem( 9024 ); // "Open" /////// VSR : TO BE REMOVED
-
- if ( !isOCCViewer && theParent == "ObjectBrowser" ) {
- if ( theObject == "Shape" )
- popup->removeItem( 800 ); // Create Group
- else if ( theObject == "Group" )
- popup->removeItem( 801 ); // Edit Group
- }
-
- if ( isOCCViewer || isVTKViewer ) {
- ////// current viewer is OCC or VTK
- SALOME_Prs* prs = aViewFrame->CreatePrs( IObject->getEntry() );
- if ( aViewFrame->isVisible( IObject ) ) {
- ////// object is already displayed in the viewer
- popup->removeItem( QAD_Display_Popup_ID );
- if ( isOCCViewer ) {
- ////// OCC viewer only
- OCCViewer_Prs* occPrs = dynamic_cast<OCCViewer_Prs*>( prs );
- if ( occPrs && !occPrs->IsNull() ) {
- AIS_ListOfInteractive ioList;
- occPrs->GetObjects( ioList );
- QMenuItem* mi = popup->findItem( 803 );
- if ( mi && mi->popup() ) {
- if ( ioList.First()->DisplayMode() == 0 )
- mi->popup()->setItemChecked( 80311, true ); // "Wireframe"
- else if ( ioList.First()->DisplayMode() == 1 )
- mi->popup()->setItemChecked( 80312, true ); // "Shading"
- else if ( ioList.First()->DisplayMode() < 0 )
- mi->popup()->setItemChecked( aDisplayMode == 0 ? 80311 : 80312 , true ); // "Wireframe" or "Shading"
- }
- }
- }
- else {
- ////// VTK viewer only
- popup->removeItem( 8034 ); // "Isos"
- VTKViewer_Prs* vtkPrs = dynamic_cast<VTKViewer_Prs*>( prs );
- if ( vtkPrs && !vtkPrs->IsNull() ) {
- vtkActorCollection* actorList = vtkPrs->GetObjects();
- actorList->InitTraversal();
- SALOME_Actor* ac = SALOME_Actor::SafeDownCast( actorList->GetNextActor() );
- QMenuItem* mi = popup->findItem( 803 );
- if ( ac && mi && mi->popup() ) {
- if ( ac->getDisplayMode() == 0 )
- mi->popup()->setItemChecked( 80311, true ); // "Wireframe"
- else if ( ac->getDisplayMode() == 1 )
- mi->popup()->setItemChecked( 80312, true ); // "Shading"
- else
- mi->popup()->setItemChecked( aDisplayMode == 0 ? 80311 : 80312 , true ); // "Wireframe" or "Shading"
- }
- }
- }
- }
- else {
- ////// object is not yet displayed in the viewer
- popup->removeItem( 803 ); // "Display Mode"
- popup->removeItem( 8032 ); // "Color"
- popup->removeItem( 8033 ); // "Transparency"
- popup->removeItem( 8034 ); // "Isos"
- popup->removeItem( QAD_Erase_Popup_ID );
- }
- delete prs;
}
- else {
- ////// other viewer type (neither OCC nor VTK)
- popup->removeItem( 803 ); // "Display Mode"
- popup->removeItem( 8032 ); // "Color"
- popup->removeItem( 8033 ); // "Transparency"
- popup->removeItem( 8034 ); // "Isos"
- popup->removeItem( QAD_Display_Popup_ID );
- popup->removeItem( QAD_DisplayOnly_Popup_ID );
- popup->removeItem( QAD_Erase_Popup_ID );
- }
- }
- }
}
- else {
- ////// MULTIPLE SELECTION
- if ( parentComponent != parent->getActiveComponent() ) {
- ////// not GEOM module objects or objects belong to different modules
- // remove all commands except Display/Erase...
- while ( 1 ) {
- int id = popup->idAt( 0 );
- if ( id <= QAD_TopLabel_Popup_ID )
- popup->removeItemAt( 0 );
- else
+ if ( vm->getType() == SVTK_Viewer::Type() )
+ {
+ QListIterator<LightApp_VTKSelector*> itVTKSel( myVTKSelectors );
+ while ( itVTKSel.hasNext() )
+ if ( LightApp_VTKSelector* sr = itVTKSel.next() )
+ if ( sr->viewer() == viewer )
+ {
+ delete myVTKSelectors.takeAt( myVTKSelectors.indexOf( sr ) );
break;
- }
- if ( parentComponent.isNull() ) {
- ////// objects belong to different modules
- popup->removeItem(QAD_Display_Popup_ID);
- popup->removeItem(QAD_DisplayOnly_Popup_ID);
- popup->removeItem(QAD_Erase_Popup_ID);
- }
- else {
- objectName = tr( "GEOM_MEN_POPUP_NAME" ).arg( nbSel );
- }
- }
- else {
- ////// all selected objects belong to GEOM module
- popup->removeItem( 901 ); // "Rename"
-
- SALOME_ListIteratorOfListIO It( Sel->StoredIObjects() );
- bool isComponent = false;
- bool needOpen = false;
- bool needDisplay = false;
- bool needErase = false;
- int needToPublish = 0;
-
- for( ;It.More();It.Next() ) {
- Handle(SALOME_InteractiveObject) anIObject = It.Value();
-
- if ( aViewFrame->isVisible( anIObject ) )
- needErase = true;
- else
- needDisplay = true;
-
- if( anIObject->hasEntry() ) {
- needToPublish = -1; /////// VSR : TO BE REMOVED
- SALOMEDS::SObject_var obj = anActiveStudy->getStudyDocument()->FindObjectID( anIObject->getEntry() );
- SALOMEDS::GenericAttribute_var aTmpAttr;
- if ( !obj->_is_nil() && !obj->GetFatherComponent()->FindAttribute( aTmpAttr, "AttributeIOR" ) )
- needOpen = true; /////// VSR : TO BE REMOVED
- if ( !obj->_is_nil() && QString( obj->GetID() ) == QString( obj->GetFatherComponent()->GetID() ) )
- isComponent = true;
- }
- else {
- if ( needToPublish != -1 ) needToPublish = 1;
- }
- }
- if( needOpen || ( !isOCCViewer && !isVTKViewer ) ) {
- ////// Data is not loaded yet or current viewer is neither OCC nor VTK
- popup->removeItem( 803 ); // "Display Mode"
- popup->removeItem( 8032 ); // "Color"
- popup->removeItem( 8033 ); // "Transparency"
- popup->removeItem( 8034 ); // "Isos"
- popup->removeItem( 804 ); // "Add in Study"
- popup->removeItem( QAD_DisplayOnly_Popup_ID );
- popup->removeItem( QAD_Display_Popup_ID );
- popup->removeItem( QAD_Erase_Popup_ID );
- }
- else {
- popup->removeItem( 9024 ); // "Open"
- if ( needToPublish <= 0 )
- popup->removeItem( 804 ); // "Add in Study"
-
- if( isComponent ) {
- popup->removeItem( 803 ); // "Display Mode"
- popup->removeItem( 8032 ); // "Color"
- popup->removeItem( 8033 ); // "Transparency"
- popup->removeItem( 8034 ); // "Isos"
- popup->removeItem( QAD_DisplayOnly_Popup_ID );
}
-
- if ( !needDisplay )
- popup->removeItem( QAD_Display_Popup_ID );
- if ( !needErase )
- popup->removeItem( QAD_Erase_Popup_ID );
- if ( !isOCCViewer )
- popup->removeItem( 8034 ); // "Isos"
- }
- }
- }
-
- // check popup for unnecessary separators
- QAD_Tools::checkPopup( popup );
- // find popup menu's TopLabel item (with title)
- int topItem = popup->indexOf( QAD_TopLabel_Popup_ID );
- if ( topItem >= 0 ) {
- // remove popup menu's title item
- popup->removeItem( QAD_TopLabel_Popup_ID );
- if ( theParent == "Viewer" && !objectName.isEmpty() && popup->count() > 0 ) {
- // set bold font for popup menu's title
- QFont f = popup->font(); f.setBold( TRUE );
- popup->removeItem( QAD_TopLabel_Popup_ID );
- popup->insertItem( new CustomItem( objectName, f ), QAD_TopLabel_Popup_ID, topItem );
- }
}
+}
- return false;
+QString GeometryGUI::engineIOR() const
+{
+ if ( !CORBA::is_nil( GetGeomGen() ) )
+ return QString( getApp()->orb()->object_to_string( GetGeomGen() ) );
+ return "";
}
-//=================================================================================
-// function : GeometryGUI::ActiveStudyChanged()
-// purpose : static
-//=================================================================================
-bool GeometryGUI::ActiveStudyChanged(QAD_Desktop* parent)
+LightApp_Selection* GeometryGUI::createSelection( const QString& client, LightApp_SelectionMgr* mgr ) const
{
- GeometryGUI* geomGUI = GetGeomGUI();
- QAD_Study* ActiveStudy = parent->getActiveStudy();
- QMenuBar* Mb = QAD_Application::getDesktop()->getMainMenuBar();
- int DisplayMode = 0;
- bool ViewOCC = false;
+ return new GEOMGUI_Selection( client, mgr );
+}
- if( ActiveStudy->getActiveStudyFrame()->getTypeView() == VIEW_OCC ) {
- OCCViewer_Viewer3d* v3d = ((OCCViewer_ViewFrame*)ActiveStudy->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getViewer();
- Handle(AIS_InteractiveContext) ic = v3d->getAISContext();
- DisplayMode = ic->DisplayMode();
- ViewOCC = true;
- }
- else if( ActiveStudy->getActiveStudyFrame()->getTypeView() == VIEW_VTK ) {
- VTKViewer_RenderWindowInteractor* myRenderInter = ((VTKViewer_ViewFrame*)ActiveStudy->getActiveStudyFrame()->getRightFrame()->getViewFrame())->getRWInteractor();
- DisplayMode = myRenderInter->GetDisplayMode();
+void GeometryGUI::contextMenuPopup( const QString& client, QMenu* menu, QString& title )
+{
+ SalomeApp_Module::contextMenuPopup( client, menu, title );
+ SALOME_ListIO lst;
+ getApp()->selectionMgr()->selectedObjects( lst );
+ if ( ( client == "OCCViewer" || client == "VTKViewer" ) && lst.Extent() == 1 ) {
+ Handle(SALOME_InteractiveObject) io = lst.First();
+ SalomeApp_Study* appStudy = dynamic_cast<SalomeApp_Study*>( application()->activeStudy() );
+ _PTR(Study) study = appStudy->studyDS();
+ _PTR(SObject) obj = study->FindObjectID( io->getEntry() );
+ if ( obj )
+ title = QString( obj->GetName().c_str() );
}
+}
- if( DisplayMode == 1 )
- Mb->changeItem( 211, tr( "GEOM_MEN_WIREFRAME" ) );
- else
- Mb->changeItem( 211, tr( "GEOM_MEN_SHADING" ) );
+void GeometryGUI::createPreferences()
+{
+ int tabId = addPreference( tr( "PREF_TAB_SETTINGS" ) );
- //Mb->setItemEnabled( 404, ViewOCC ); // SKETCHER
- Mb->setItemEnabled( 603, ViewOCC ); // SuppressFace
- Mb->setItemEnabled( 604, ViewOCC ); // SuppressHole
- Mb->setItemEnabled( 606, ViewOCC ); // CloseContour
- Mb->setItemEnabled( 413, ViewOCC ); // Isos Settings
- Mb->setItemEnabled( 800, ViewOCC ); // Create Group
- Mb->setItemEnabled( 801, ViewOCC ); // Edit Group
- Mb->setItemEnabled(9998, ViewOCC ); // MENU BLOCKS - MULTI-TRANSFORMATION
+ int genGroup = addPreference( tr( "PREF_GROUP_GENERAL" ), tabId );
+ setPreferenceProperty( genGroup, "columns", 1 );
- geomGUI->EmitSignalCloseAllDialogs();
+ int dispmode = addPreference( tr( "PREF_DISPLAY_MODE" ), genGroup,
+ LightApp_Preferences::Selector,
+ "Geometry", "display_mode" );
- // PAL5356: update VTK selection
- ::UpdateVtkSelection( parent );
+ addPreference( tr( "PREF_SHADING_COLOR" ), genGroup,
+ LightApp_Preferences::Color, "Geometry", "shading_color" );
+
+ addPreference( tr( "PREF_WIREFRAME_COLOR" ), genGroup,
+ LightApp_Preferences::Color, "Geometry", "wireframe_color" );
+
+ addPreference( tr( "PREF_FREE_BOUND_COLOR" ), genGroup,
+ LightApp_Preferences::Color, "Geometry", "free_bound_color" );
+
+ addPreference( tr( "PREF_LINE_COLOR"), genGroup,
+ LightApp_Preferences::Color, "Geometry", "line_color" );
+
+ addPreference( tr( "PREF_POINT_COLOR"), genGroup,
+ LightApp_Preferences::Color, "Geometry", "point_color" );
+
+ addPreference( tr( "PREF_ISOS_COLOR" ), genGroup,
+ LightApp_Preferences::Color, "Geometry", "isos_color" );
+
+ int step = addPreference( tr( "PREF_STEP_VALUE" ), genGroup,
+ LightApp_Preferences::IntSpin, "Geometry", "SettingsGeomStep" );
+
+ int VertexGroup = addPreference( tr( "PREF_GROUP_VERTEX" ), tabId );
+
+ int typeOfMarker = addPreference( tr( "PREF_TYPE_OF_MARKER" ), VertexGroup,
+ LightApp_Preferences::Selector, "Geometry", "type_of_marker" );
+
+ int markerScale = addPreference( tr( "PREF_MARKER_SCALE" ), VertexGroup,
+ LightApp_Preferences::DblSpin, "Geometry", "marker_scale" );
+
+ // Set property for default display mode
+ QStringList aModesList;
+ aModesList.append( tr("MEN_WIREFRAME") );
+ aModesList.append( tr("MEN_SHADING") );
+
+ QList<QVariant> anIndexesList;
+ anIndexesList.append(0);
+ anIndexesList.append(1);
+
+ setPreferenceProperty( dispmode, "strings", aModesList );
+ setPreferenceProperty( dispmode, "indexes", anIndexesList );
+
+ // Set property for step value for spinboxes
+ setPreferenceProperty( step, "min", 0.001 );
+ setPreferenceProperty( step, "max", 10000 );
+ setPreferenceProperty( step, "precision", 3 );
+
+ // Set property for type of vertex marker
+ QStringList aTypeOfMarkerList;
+ QList<QVariant> anTypeOfMarkerIndexesList;
+
+ aTypeOfMarkerList.append( tr("TOM_PLUS") );
+ anTypeOfMarkerIndexesList.append(Aspect_TOM_PLUS);
+
+ aTypeOfMarkerList.append( tr("TOM_POINT") );
+ anTypeOfMarkerIndexesList.append(Aspect_TOM_POINT);
+
+ aTypeOfMarkerList.append( tr("TOM_STAR") );
+ anTypeOfMarkerIndexesList.append(Aspect_TOM_STAR);
+
+ aTypeOfMarkerList.append( tr("TOM_O") );
+ anTypeOfMarkerIndexesList.append(Aspect_TOM_O);
+
+ aTypeOfMarkerList.append( tr("TOM_X") );
+ anTypeOfMarkerIndexesList.append(Aspect_TOM_X);
+
+ aTypeOfMarkerList.append( tr("TOM_O_POINT") );
+ anTypeOfMarkerIndexesList.append(Aspect_TOM_O_POINT);
+
+ aTypeOfMarkerList.append( tr("TOM_O_PLUS") );
+ anTypeOfMarkerIndexesList.append(Aspect_TOM_O_PLUS);
+
+ aTypeOfMarkerList.append( tr("TOM_O_STAR") );
+ anTypeOfMarkerIndexesList.append(Aspect_TOM_O_STAR);
+
+ aTypeOfMarkerList.append( tr("TOM_O_X") );
+ anTypeOfMarkerIndexesList.append(Aspect_TOM_O_X);
+
+
+ setPreferenceProperty( typeOfMarker, "strings", aTypeOfMarkerList );
+ setPreferenceProperty( typeOfMarker, "indexes", anTypeOfMarkerIndexesList );
+
+ // Set property for Vertex Marker scale
+ setPreferenceProperty( markerScale, "min", 1. );
+ setPreferenceProperty( markerScale, "max", 7. );
+ setPreferenceProperty( markerScale, "precision", 0.01 );
+ setPreferenceProperty( markerScale, "step", 0.5 );
- bool bOk = true;
- GUIMap::Iterator it;
- for ( it = geomGUI->myGUIMap.begin(); it != geomGUI->myGUIMap.end(); ++it )
- bOk = bOk && it.data()->ActiveStudyChanged( parent );
- return bOk;
}
-//=======================================================================
-// function : GeometryGUI::BuildPresentation()
-// purpose : static
-//=======================================================================
-void GeometryGUI::BuildPresentation( const Handle(SALOME_InteractiveObject)& theIO,
- QAD_ViewFrame* theViewFrame )
+void GeometryGUI::preferencesChanged( const QString& section, const QString& param )
{
- GEOM_Displayer().Display( theIO, false, theViewFrame );
+ if (section == "Geometry") {
+ SUIT_ResourceMgr* aResourceMgr = SUIT_Session::session()->resourceMgr();
+ if (param == QString("SettingsGeomStep")) {
+ double spin_step = aResourceMgr->doubleValue(section, param, 100.);
+ EmitSignalDefaultStepValueChanged(spin_step);
+ }
+ }
+}
+
+LightApp_Displayer* GeometryGUI::displayer()
+{
+ if( !myDisplayer )
+ myDisplayer = new GEOM_Displayer( dynamic_cast<SalomeApp_Study*>( getApp()->activeStudy() ) );
+ return myDisplayer;
}
-void GeometryGUI::SupportedViewType(int* buffer, int bufferSize)
+void GeometryGUI::setLocalSelectionMode(const int mode)
+{
+ myLocalSelectionMode = mode;
+}
+int GeometryGUI::getLocalSelectionMode() const
{
- if(!buffer || !bufferSize) return;
- buffer[0] = (int)VIEW_OCC;
- if (--bufferSize) buffer[1] = (int)VIEW_VTK;
+ return myLocalSelectionMode;
}